• A, Divya Entropy optimization of non-Newtonian hybrid nanofluid flow with non-linear radiation, exponential and thermal dependent heat source: Neuro-intelligent design [(Articles in Press)]
• A., John Rajan SELECTION OF POLYMER EXTRUSION PARAMETERS BY FACTORIAL EXPERIMENTAL DESIGN – A DECISION MAKING MODEL [(Articles in Press)]
• A., Muhammad Bayesian analysis of heterogeneous doubly censored lifetime data using the 3-component mixture of Rayleigh distributions: A Monte Carlo simulation study [Volume 26, Issue 3, 2019, Pages 1789-1808]
• A. Abbasi, Ali Application of Hyperelastic Models in Mechanical Properties prediction of Mouse Oocyte and Embryo Cells at Large Deformations [Volume 25, Issue 2, 2018, Pages 700-710]
• Aaghaie, Abdollah Network revenue management under specific choice models [Volume 20, Issue 6, 2013, Pages 2161-2176]
• Aali, M. Experimental study of effect of laser machining process of CO2 on electrical conductivity and magnetic properties of PMMA/MWCNT composite [Volume 29, Issue 6, 2022, Pages 3543-3553]
• Aazami, A. Benders decomposition algorithm for robust aggregate production planning considering pricing decisions in competitive environment: A case study [Volume 26, Issue 5, 2019, Pages 3007-3031]
• Aba, S. The effect of sintering pressure on the wear behavior of bronze (85/15) alloys produced using hip method [Volume 28, Issue 4, 2021, Pages 2259-2266]
• Abachi, Parvin The effect of current density on microstructural homogeneity, hardness, fracture toughness and electrochemical behavior of electrodeposited Cu-0.5Co/WC nano-composite coating [Volume 24, Issue 6, 2017, Pages 3505-3511]
• Abad, F. An analytical state-space solution for free vibration of sandwich piezoelectric plate with functionally graded core [Volume 29, Issue 2, 2022, Pages 502-533]
• Abadi, M. Using Binary Particle Swarm Optimization for Minimization Analysis of Large-Scale Network Attack Graphs [Volume 15, Issue 6, 2008]
• Abadpour, A. Principal Color and its Application to Color Image Segmentation [Volume 15, Issue 2, 2008]
• Abadyan, M. Modeling the size dependent pull-in instability of cantilever nano-switch immersed in ionic liquid electrolytes using strain gradient theory [Volume 23, Issue 3, 2016, Pages 976-989]
• Abadyan, M. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
• Abadyan, Mohamadreza A modified model for stability analysis of narrow-width NEMS tweezers: Corrections due to surface layer, scale dependency and force distributions [Volume 24, Issue 2, 2017, Pages 673-683]
• Abaee, M.S. Copper-catalyzed N-arylation of heterocycles in ethylene glycol medium [Volume 23, Issue 6, 2016, Pages 2742-2749]
• Abaee, M. Saeed An efficient synthesis of monoarylidene derivatives of pyran-4-one and piperidin-4-one [Volume 21, Issue 3, 2014, Pages 719-726]
• Abam, M.A. Online conflict-free coloring of intervals [Volume 21, Issue 6, 2014, Pages 2138-2141]
• Abam, M.A. Effiiently computing the smallest axis-parallel squares spanning all colors [Volume 24, Issue 3, 2017, Pages 1325-1334]
• Abam, M.A. Tight online conflict-free coloring of intervals [Volume 28, Special issue on collective behavior of nonlinear dynamical networks, 2021, Pages 1493-1496]
• Abapour, M. Risk-based cooperative scheduling of demand response and electric vehicle aggregators [Volume 26, Special Issue on machine learning, data analytics, and advanced optimization techniques..., 2019, Pages 3571-3581]
• Abapour, M. Security constrained optimal power flow in a power system based on energy storage system with high wind penetration [Volume 29, Issue 3, 2022, Pages 1475-1485]
• Abas, Siti Sabariah Finite Element Analysis and Aspects of Solar Energy for Prandtl Nanofluid with Heat Transfer [(Articles in Press)]
• Abasifard, M. Petahertz-frequency plasmons in graphene nanopore and their application to nanoparticle sensing [Volume 24, Issue 3, 2017, Pages 1669-1677]
• Abasifard, Mostafa Controlling DNA translocation speed through graphene nanopore via plasmonic fields [Volume 25, Issue 3, 2018, Pages 1849-1856]
• Abazari, Saeed A new technique for efficient reconfiguration of distribution networks [Volume 22, Issue 6, 2015, Pages 2516-2526]
• Abazari, Saeed Sliding-Mode Control for a DFIG-Based Wind-Power Generation System with Series Grid-Side Converter under Unbalanced Grid Voltage Conditions [Volume 25, Issue 3, 2018, Pages 1507-1522]
• ABBARI NOOGHABI, MEHDI J Predicting shear wave velocity of soil using multiple linear regression analysis and artificial neural networks [Volume 25, Issue 4, 2018, Pages 1943-1955]
• Abbas, Imran Computational Study on the Influence of Non-Newtonian Nano fluids in Fluid Flow and Heat Transfer over a Permeable Surface with Injection and Suction [(Articles in Press)]
• Abbas, N. Performance evaluation of joint monitoring control charts [Volume 24, Issue 4, 2017, Pages 2152-2163]
• Abbas, N. Analysis of non-Newtonian fluid with phase flow model [Volume 28, Issue 6, 2021, Pages 3743-3752]
• Abbas, N. Effects of heat and mass transfer on stagnation point flow of micropolar Maxwell fluid over Riga plate [Volume 28, Issue 6, 2021, Pages 3753-3766]
• Abbas, N. Theoretical study of two-dimensional unsteady Maxwell fluid flow over a vertical Riga plate under radiation effects [Volume 29, Issue 6, 2022, Pages 3072-3083]
• Abbas, Nadeem Analytical view of magnetic hydrodynamic rotating flow of Barium Ferrite nano fluid with viscous dissipation [Volume 27, Issue 6, 2020, Pages 3421-3433]
• Abbas, Nadeem Numerical Analysis of Hybrid Nanomaterial fluid flow with Dust Particles over a Permeable Vertical Wedge [(Articles in Press)]
• Abbas, Nadeem Comprehensive Analysis of Conformable Mathematical Model of Ebola Virus with Effective Control Strategies [(Articles in Press)]
• Abbas, Syed Tehseen Three-Dimensional Stretched Boundary Layer Flow of Casson Nanofluid in Rotating Frame with Bio-convection Phenomenon [(Articles in Press)]
• Abbas, Tasawar Temperature dependent heat generation and variable viscosity features for viscoelastic fluid with homogeneous and heterogeneous (HH) chemical reactions [(Articles in Press)]
• Abbas, Tasawar Thermal applications of hybrid nanofluid containing carbon nanotubes with heat source and radiative effects [(Articles in Press)]
• Abbas, Z. MHD stagnation slip .ow over an unsteady stretching surface in porous medium [Volume 21, Issue 4, 2014, Pages 1355-1366]
• Abbas, Z. Fahraeus-Lindqvist effect in an Oldroyd 8-constant fluid [Volume 22, Issue 5, 2015, Pages 1899-1903]
• Abbas, Z. Series solution of slip ow of Al2O3 and Fe3O4 nanoparticles in a horizontal channel with a porous medium by using least square and Galerkin methods [Volume 27, Issue 5, 2020, Pages 2465-2477]
• Abbas, Z. Cattaneo-Christov heat and mass flux models on time-dependent swirling flow through oscillatory rotating disk [Volume 28, Issue 3, 2021, Pages 1329-1341]
• Abbasbandy, S. An Augmented Galerkin Method for Singular Integral Equations with Hilbert Kernel [Volume 4, Issue 1, 1997, Pages 60-64]
• Abbasgholipour, M. Various types of ceramics used in radome: A review [Volume 24, Issue 3, 2017, Pages 1136-1147]
• Abbas Haider, J. Mathematical modeling of Williamson's model for blood flow inside permeable multiple stenosed arteries with electro-osmosis [Volume 30, Issue 5, 2023, Pages 1572-1586]
• Abbasi, A. Preparation of MoO3/CuMoO4 nanoparticles as selective catalyst for olefin epoxidation [Volume 24, Issue 3, 2017, Pages 1203-1208]
• Abbasi, A. A 3D polyoxoniobate-based framework showing performance in dye removal from aqueous solution [Volume 26, Issue 6, 2019, Pages 3387-3399]
• Abbasi, Aamar Computation insight of modified thermal distribution of hybrid nanofluids in complex wavy channel: A comparative thermal approach for different nanofluid models [(Articles in Press)]
• Abbasi, Aamar Rotational Stagnation Point Non-Newtonian Second-Grade Fluid Flowing over Spiraling Disk [(Articles in Press)]
• Abbasi, B. A Transformation Technique in Designing Multi-Attributes C Control Charts [Volume 15, Issue 1, 2008]
• Abbasi, B. Multi-stage investment planning and customer selection in a two-echelon multi-period supply chain design [Volume 26, Issue 5, 2019, Pages 3032-3050]
• Abbasi, Fateme The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
• Abbasi, F. M. Hydromagnetic Blasius-Sakiadis flows with variable features and nonlinear chemical reaction [Volume 28, Issue 6, 2021, Pages 3246-3258]
• Abbasi, F. M. Influence of curvature-dependent channel walls on MHD peristaltic flow of viscous fluid with Hall currents and Joule dissipation [Volume 29, Issue 6, 2022, Pages 3107-3118]
• Abbasi, Hasan Improved CT Image Reconstruction Through Partial Fourier Sampling [Volume 23, Issue 6, 2016, Pages 2908-2916]
• Abbasi, M. Assessing feasibility of overnight-charging electric bus in a real-world BRT system in the context of a developing country [Volume 29, Issue 6, 2022, Pages 2968-2978]
• Abbasi, M. A. Synthesis, characterization and biological screening of different carbamates derived from 7-hydroxy-4-methyl-2H-1-benzopyran-2-one [Volume 22, Issue 6, 2015, Pages 2241-2248]
• Abbasi, M.A. Synthesis and structure-activity relationship of 1-[(E)-3-phenyl-2-propenyl] piperazine derivatives as suitable antibacterial agents with mild hemolysis [Volume 26, Issue 6, 2019, Pages 3375-3386]
• Abbasi, Mohammadhossein How does the environmental concerns affect the satisfaction of BRT and Metro users? A moderator analysis [Volume 31, Issue 19, 2024, Pages 1842-1856]
• Abbasi, Mohammadhossein Shared autonomous vehicle with pooled service, a modal shift approach [(Articles in Press)]
• Abbasi, M. R. Simulation of photocatalytic planar microreactor for degradation of cephalexin in contaminated water [(Articles in Press)]
• Abbasi, S. Electrochemical anodic oxidation process of porous titanium granules for biomedical applications [Volume 22, Issue 6, 2015, Pages 2745-2751]
• Abbasi, S.A. On enhanced sensitivity of nonparametric EWMA control charts for process monitoring [Volume 24, Issue 1, 2017, Pages 424-438]
• Abbasi, S.A. Monitoring of serially correlated processes using residual control charts [Volume 24, Issue 3, 2017, Pages 1603-1614]
• Abbasi, Saddam Akbar Impact of measurement error on maximum hybrid exponentially weighted moving average control chart [(Articles in Press)]
• Abbasi, Sepehr Identifying required project managers’ core competencies in complex product systems using project complexity assessment: A case study in Iran's oil and gas R&D projects [(Articles in Press)]
• Abbasi, Zahra Fe2+supported on hydroxyapatite-core-shell-γ-Fe2O3nanoparticles: As a novel, efficient and magnetically-recoverable catalyst for the synthesis of dihydropyrimidinones derivatives [Volume 22, Issue 3, 2015, Pages 903-910]
• Abbasi, Zeinab The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
• Abbasian, A.A. Effects of uncertainties of conductivity models on mixed convection for Al2O3-water nano fluid [Volume 23, Issue 3, 2016, Pages 951-965]
• Abbasian, M. Synthesis and characterization of poly(styrene-block-acrylic acid)/Fe3O4 magnetic nanocomposite using reversible addition-fragmentation chain transfer polymerization [Volume 26, Issue 3, 2019, Pages 1447-1456]
• Abbasian, M. Exfoliated poly (styrene-co-urethane) grafted-poly methylmethacrylate/layered double hydroxide nanocomposite synthesized by metal catalyzed living radical polymerization and solvent blending method [Volume 31, Issue 9, 2024, Pages 681-691]
• Abbasian Arani, A.A. Study of Nanofluid Natural Convection in an Inclined L-Shaped Cavity [Volume 20, Issue 6, 2013, Pages 2297-2305]
• Abbasian Najafabadi, T. Optimized age dependent clustering algorithm for prognosis: A case study on gas turbines [Volume 28, Issue 3, 2021, Pages 1245-1258]
• Abbasi Harofteh, S. A novel risk assessment approach using Monte Carlo simulation based on co-occurrence of risk factors: A case study of a petrochemical plant construction [Volume 29, Issue 3, 2022, Pages 1755-1765]
• Abbasimehr, Hossein A Novel Interval Type-2 Fuzzy AHP-TOPSIS Approach For Ranking Reviewers in online communities [Volume 23, Issue 5, 2016, Pages 2355-2373]
• Abbasi-Pooya, A. An effective league championship algorithm for the stochastic multi-period portfolio optimization problem [Volume 27, Issue 2, 2020, Pages 829-845]
• Abbasizade, F. Investigation into opportunities and challenges of cross-border electricity trade in Iran [Volume 30, Issue 3, 2023, Pages 1159-1168]
• Abbasnia, A. Evaluation of the modified 3D free-surface Green’s function for potential flow in a numerical towing tank [Volume 20, Issue 5, 2013, Pages 1538-1549]
• Abbaspanah, Bahareh Increasing the Efficacy of Umbilical Cord Blood Banking Using Machine Learning Algorithms: A Case Study from Royan Cord Blood Bank [(Articles in Press)]
• Abbaspour, A. Incorporating Large Photovoltaic Farms in Power ‎Generation System Adequacy Assessment [Volume 21, Issue 3, 2014, Pages 924-934]
• Abbaspour, A. Modification of plasma Confinement using Resonant.... [Volume 4, Issue 1, 1997, Pages 71-76]
• Abbaspour, M. Design of a Mathematical Model to Minimize Air Pollution Caused by Job Trips in Mega Cities [Volume 16, Issue 2, 2009]
• Abbaspour, M. Comparing Sloshing Phenomena in a Rectangular Container with and without a Porous Medium Using Explicit Nonlinear 2-D BEM-FDM [Volume 17, Issue 2, 2010]
• Abbaspour, M. Gauss Integration Singular Integrals of BEM for Geometrically Linear ElementsLimits in Nearly [Volume 17, Issue 4, 2010]
• Abbaspour, Madjid Dynamic Behavior of a Tension Leg Platform Offshore Wind Turbine under ‎Environmental Loads [Volume 21, Issue 3, 2014, Pages 480-491]
• Abbaspour, Madjid Resilient approach toward urban development in lake catchments, case of Urmia Lake [Volume 23, Issue 4, 2016, Pages 1627-1632]
• Abbaspour, Madjid Resilient cities, a key solution to safeguard the environment [Volume 23, Issue 5, 2016, Pages 2067-2076]
• Abbassi, A. Numerical simulation of the effect of visitor's movement on bacteria-carrying particles distribution in hospital isolation room [Volume 24, Issue 3, 2017, Pages 1160-1170]
• Abbassi, A. Computational optimization of a UFAD system using large eddy simulation [Volume 27, Issue 6, 2020, Pages 2871-2888]
• Abbassi, A. Numerical and experimental analysis of the air distribution system in a data center building to improve the thermal performance [Volume 28, Issue 6, 2021, Pages 3141-3155]
• Abbassi, Rabeh Virtual Flux Based Direct Power Control of Shunt Active Filter [Volume 21, Issue 6, 2014, Pages 2165-2176]
• Abbaszadeh, K. Modeling and Simulation of Dual Three-Phase Induction Machine Under Fault Conditions and Proposal of a New Vector Control Approach for Torque Oscillation Reduction [Volume 9, Issue 4, 2002]
• Abbaszadeh, K. Analytical Quasi 3D Modeling of an Axial Flux PM Motor with Static Eccentricity Fault [Volume 22, Issue 6, 2015, Pages 2482-2491]
• Abbaszadeh, K. A Novel Transverse Flux Permanent Magnet Generator for Small-Scale Direct Drive Wind Turbine Application: Design and Analysis [Volume 28, Issue 6, 2021, Pages 3363-3378]
• Abbaszadeh, K. C- and circular-shaped barriers optimization in a synchronous reluctance rotor for torque ripples minimization [Volume 30, Issue 3, 2023, Pages 1085-1096]
• Abbaszadeh, K. Simplified Two-Step Bidirectional Commutation Strategy for High Frequency Unity Power Factor Matrix Converter Supplying Inductive Power Transfer System [(Articles in Press)]
• Abbaszadeh, karim Fast Response Predictive Controllers for Mono-Inverter Dual Parallel Permanent Magnet Synchronous [(Articles in Press)]
• Abbaszadeh, Mahmoud Analytical study of Al2O3-Cu/water micropolar hybrid nanofluid in a porous channel with expanding/contracting walls in the presence of magnetic field [Volume 25, Issue 1, 2018, Pages 208-220]
• Abbaszadeh, N. Flexible flow shop scheduling problem to minimize makespan with renewable resources [Volume 28, Issue 3, 2021, Pages 1853-1870]
• Abd, Muhannad M. The structural, optical, and self-cleaning properties of Mn3O4/SnO2 multilayer thin films deposited using spray pyrolysis technique [Volume 28, Issue 6, 2021, Pages 3776-3785]
• Abd Al- Karim, Shereen F. Experimental and numerical investigation of solar air collector with different porous media obstructions [(Articles in Press)]
• Abdalla, H. A. Improvement of the axial-jet-pump performance using modified mixing chamber configuration and inlet swirling flow [Volume 31, Issue 1, 2024, Pages 26-42]
• Abdallah, C. Decenteralized Adaptive Control of A Nuclear Reactor [Volume 1, Issue 1, 1994]
• Abdalrazzaq, Alaa Salim Radiation Pattern Synthesis of Smart Fourth Dimensional (4D) Antenna Arrays Using Optimal Pulse Splitting Method [(Articles in Press)]
• Abdekhodaei, M. J. Theoretical study of diffusional release of a dispersed solute from a hollow cylindrical polymeric matrix [Volume 28, Issue 3, 2021, Pages 1428-1435]
• Abdekhodaie, M.J. Drug Release Mechanisms from Composite Matrices I. Theoretical Issues [Volume 9, Issue 1, 2002]
• Abdekhodaie, M.J. Drug Release Mechanisms from Composite Matrices II. Experimental Issues [Volume 9, Issue 1, 2002]
• Abdekhodaie, M.J. Polymeric Reservoirs for Controlled Release of Iodine in Drinking Water [Volume 7, Issue 2, 2000]
• Abdel-Aty, Abdel-Haleem Analytical approaches to the (2+1)-dimensional Heisenberg Ferromagnetic Spin Chain equation and their applications for optical devices [(Articles in Press)]
• Abdelaziz, A. Y. A novel robust model reference adaptive MPPT controller for Photovoltaic systems [(Articles in Press)]
• Abdelaziz, A.Y. Design and analysis of solar photovoltaic-fed Z-source inverter-based dynamic voltage restorer [Volume 27, Issue 6, 2020, Pages 3190-3203]
• Abdelkader, Mami Lyapunov-Global-Lanczos Algorithm for Model Order Reduction & Adaptive PI Controller of Large Scale Electrical Systems [Volume 25, Issue 3, 2018, Pages 1616-1628]
• Abdelmalek, Z. Analytical study on couple stress fluid in an inclined channel [Volume 28, Issue 4, 2021, Pages 2164-2175]
• Abdel Moneim Mohamed, Sumya A New Three Parameter Cubic Equation of State [Volume 17, Issue 2, 2010]
• Abdelrahman Rabah, Ali A New Three Parameter Cubic Equation of State [Volume 17, Issue 2, 2010]
• Abdel-Salam, G. A. Measuring skewness: We do not assume much [Volume 28, Issue 6, 2021, Pages 3525-3537]
• Abdel-Sattar, M. A. Analysis of non-Newtonian fluid with phase flow model [Volume 28, Issue 6, 2021, Pages 3743-3752]
• Abderezaei, Javid Transient behavior of electrostatically-actuated micro systems considering squeeze film damping and mechanical shock [Volume 24, Issue 6, 2017, Pages 2887-2894]
• Abdi, E. RUbIn: A framework for reliable and ubiquitous inference in WSNs [Volume 26, Special Issue on machine learning, data analytics, and advanced optimization techniques..., 2019, Pages 3540-3555]
• Abdi, Elahe A Meshless Method to Simulate the Interactions Between A Large Soft Tissue and A Surgical Grasper [Volume 23, Issue 1, 2016, Pages 295-300]
• Abdi, M.A. Experimental investigation of shock wave oscillation on a thin supercritical airfoil [Volume 27, Issue 2, 2020, Pages 795-805]
• Abdi, Mahmood Reza Assessment of relative density on shear strength and volumetric characteristics of sand-EPS particulate mixtures [(Articles in Press)]
• Abdi, M. H. Structural, electrical, and magnetic characterization of nickel-doped tin oxide film by a sol–gel method [Volume 21, Issue 6, 2014, Pages 2459-2467]
• Abdi-Jalebi, Mojtaba Low temperature dye-sensitized solar cells based on conformal thin zinc oxide overlayer on mesoporous insulating template by atomic layer deposition [Volume 21, Issue 6, 2014, Pages 2479-2484]
• Abdi Oskooie, Hossein An Efficient One-pot Three-component Synthesis of Pyrido[2,3-d]pyrimidine Derivatives in the Presence of Nano Silica-supported Preyssler H14[NaP5W30O110]/SiO2 as a Green and Reusable Catalyst [Volume 23, Issue 6, 2016, Pages 2717-2723]
• Abdoli, khatereh A microemulsion route to fabrication of mono and bimetallic Cu/Zn/γ-Al2O3 nanocatalysts for hydrogenation reaction [Volume 25, Issue 3, 2018, Pages 1364-1370]
• Abdoli, Seyed Majid Adsorption of Phenol Compounds by Nanoporous Silica Aerogel [Volume 22, Issue 3, 2015, Pages 992-1000]
• Abdoli Sharifpoor, Reza A Finite Element Formulation for bending analysis of isotropic and orthotropic plates based on Two-Variable Refined Plate Theory [Volume 22, Issue 1, 2015, Pages 196-207]
• Abdoli Sharifpoor, Reza Finite Element Formulations for Free Vibration Analysis of Isotropic and Orthotropic Plates using Two-Variable Refined Plate Theory [Volume 23, Issue 4, 2016, Pages 1787-1799]
• Abdollahi, A. A new adequacy evaluation method for transmission expansion planning problems [Volume 23, Issue 3, 2016, Pages 1310-1317]
• Abdollahi, A. Dynamic negawatt demand response resource modeling and prioritizing in power markets [Volume 27, Issue 3, 2020, Pages 1361-1372]
• Abdollahi, A. Dynamic negawatt demand response resource modeling and prioritizing in power markets [Volume 27, Issue 3, 2020, Pages 1361-1372]
• Abdollahi, A. A Less-Effort Method for Spatial Network Planning [Volume 25, Issue 3, 2018, Pages 1478-1491]
• Abdollahi, A. An application of energy efficiency programs to multi-stage transmission network expansion and reactive power planning [Volume 29, Issue 3, 2022, Pages 1547-1561]
• Abdollahi, A. Heat and electricity supply chain expansion planning under the umbrella of energy hub: A case study of Iran [Volume 29, Issue 4, 2022, Pages 1983-2006]
• Abdollahi, Amir Load shifting demand response in energy scheduling based on payment cost minimization auction mechanism [Volume 29, Issue 5, 2022, Pages 2450-2464]
• Abdollahi, Amir Simultaneous energy hub operation and construction for investigating quantitative flexibility considering uncertain supply and demand side resources [(Articles in Press)]
• Abdollahi, Amir Improvement of power quality in power system using hybrid automata supervisory controller [(Articles in Press)]
• Abdollahi, R. Introducing a new co-polymeric adsorbent with fast sorption rate and high sorption capacity for removing the heavy metal ions: A thermodynamic and kinetic study [Volume 28, Issue 3, 2021, Pages 1436-1451]
• Abdollahi, Y. Control and performance assessment of grid-connected PMSG-based wind turbine equipped with diode bridge rectifier and boost converter using three different control strategies [Volume 31, Issue 14, 2024, Pages 1206-1221]
• Abdollahi Azgomi, M. Evaluation of the functionality of mobile wireless sensor networks using stochastic reward nets [Volume 30, Issue 1, 2023, Pages 91-103]
• Abdollahi Govar, A. Superheated Water Extraction of Catechins from Green Tea Leaves: Modeling and Simulation [Volume 16, Issue 2, 2009]
• Abdollahi Kamran, Mehdi A two-stage stochastic model for designing cellular manufacturing systems with simultaneous multiple processing routes and subcontracting [Volume 25, Issue 5, 2018, Pages 2824-2837]
• Abdollahi Nejand, B. Optical and Photocatalytic Characteristics of Nitrogen Doped TiO2 Thin Film Deposited by Magnetron Sputtering [Volume 17, Issue 2, 2010]
• Abdollahnejad, Z. Increasing the flexural capacity of geopolymer concrete beams using partially deflection hardening cement-based layers: Numerical study [Volume 24, Issue 6, 2017, Pages 2832-2844]
• Abdolmohammadi, H.R. A novel low complexity multiuser detector based on modified genetic algorithm in Direct Sequence-Code Division Multiple Access communication systems [Volume 20, Issue 6, 2013, Pages 2015-2023]
• Abdolvand, N. Developing a Solution for Intelligent Urban Transportation Management Using the Internet of Things [Volume 28, Issue 2, 2021, Pages 709-720]
• Abdoos, H. Seismic behavior comparison of RC shear walls strengthened using FRP composites and steel elements [Volume 28, Issue 3, 2021, Pages 1167-1181]
• Abd Rahim, Hazwan Faiz Manganese Oxide Doped Noble Metals Supported Catalyst for Carbon Dioxide Methanation Reaction [Volume 17, Issue 2, 2010]
• Abdul Aziz, M.S. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
• Abdul Hakeem, A.K. Mixed convection in a lid-driven cavity with sinusoidal boundary temperature at the bottom wall in the presence of magnetic field [Volume 23, Issue 3, 2016, Pages 1027-1036]
• Abdul Hakeem, A.K. Second law analysis for radiative MHD slip flow of a nanofluid over a stretching sheet with non-uniform heat source effect [Volume 23, Issue 3, 2016, Pages 1524-1538]
• Abdul Hakeem, A.K. Comparison of disparate solid volume fraction ratios of hybrid nanofluids flow over a permeable flat surface with aligned magnetic field and Marangoni convection [Volume 27, Issue 6, 2020, Pages 3367-3380]
• Abdul Hussein, Amaal Abdul Razaq A review of convective heat transfer in cavity-channel assemblies [(Articles in Press)]
• Abdullah, Abdul Halim XRD, AFM and UV-Vis Optical Studies of PbSe Thin Films Produced by Chemical Bath Deposition Method [Volume 17, Issue 2, 2010]
• Abdullah, M.Z. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
• Abdullah, N. H. Determining the effect of ageing of nano-clay modified bitumen using atomic force microscopy [Volume 28, Issue 5, 2021, Pages 2534-2545]
• Abdullah, O. I. Numerical simulation of laminar flow and free convection heat transfer from an isothermal vertical flat plate [(Articles in Press)]
• Abdullah Make, M. R. Optimization of two-sided assembly line balancing with resource constraints using modified particle swarm optimisation [Volume 29, Issue 4, 2022, Pages 2084-2098]
• Abdul Majeed, Mahshooq Forecasting intrusion in critical power systems infrastructure using Advanced Autoregressive Moving Average (AARMA) based intrusion detection for efficacious alert system [Volume 31, Issue 17, 2024, Pages 1490-1503]
• Abdul Majid, M. Case based reasoning for green information systems infusion and assimilation among IT professionals in university campuses [Volume 26, Special Issue on: Socio-Cognitive Engineering, 2019, Pages 127-135]
• Abdul Malik, Adi Maimun bin Computational Simulation of Current Forces on Floating Production Storage and Ooading in Irregular Waves [Volume 17, Issue 1, 2010]
• Abdur Razzak, M . Coupling of energy and harmonic balance method for solving a conservative oscillator with strong odd-nonlinearity [Volume 25, Issue 3, 2018, Pages 991-998]
• Abdykadyrova, Rakhat An integrated coastal vulnerability index for sustainable development of coastal ecosystems: a case study of Issyk-Kul lake [(Articles in Press)]
• Abdzadeh, B. Bi-objective optimization of non-periodic preventive maintenance strategy by considering time value of money [Volume 27, Issue 6, 2020, Pages 3305-3321]
• Abdzadeh, Behnam An economic-statistical production quantity model under quality-maintenance policy for imperfect manufacturing systems with interaction effect among assignable causes [(Articles in Press)]
• Abeddoust, Mohammad A Computational Model for Estimation of Mechanical Parameters in Chemotactic Endothelial Cells [Volume 23, Issue 1, 2016, Pages 260-267]
• Abedi, M. Integrated Collaborative Tools for Precast Supply Chain Management [Volume 23, Issue 2, 2016, Pages 429-448]
• Abedi, M. Employing a Novel Gait Pattern Generator on a Social Humanoid Robot [Volume 26, Issue 4: Special Issue Dedicated to Professor Abolhassan Vafai, 2019, Pages 2154-2166]
• Abedi, M. Experimental investigation into the effects of Mach number and boundary-layer bleed on flow stability of a supersonic air intake [Volume 27, Issue 3, 2020, Pages 1197-1205]
• Abedi, M. Detection of the stator inter-turn fault using the energy feature of the wavelet coeffcients obtained through continuous wavelet transform [Volume 30, Issue 2, 2023, Pages 536-550]
• Abedi, M. Simultaneous spectrofluorometric analysis of caffeic and ellagic acids through inclusion complex formation with γ-Cyclodextrin [Volume 29, Issue 3, 2022, Pages 1308-1318]
• Abedi, Mostafa A Reliable Fault Tolerant Attitude Control System Based on an Adaptive Fault Detection and Diagnosis Algorithm together with a Backstepping Fault Recovery Controller [Volume 20, Issue 6, 2013, Pages 1999-2014]
• Abedi, Zahra Resilient approach toward urban development in lake catchments, case of Urmia Lake [Volume 23, Issue 4, 2016, Pages 1627-1632]
• Abedian, A. An approximate methodology to simulate combined conduction-radiation heat transfer for multi-layer insulator [Volume 27, Issue 6, 2020, Pages 2924-2932]
• Abedian, Ali Repair-Based Design of Composite Structures: Scarf Repair [(Articles in Press)]
• Abedini, A. NUMERICAL STUDY OF MIXED CONVECTION IN THE ANNULUS BETWEEN ECCENTRIC ROTATING CYLINDERS [Volume 21, Issue 4, 2014, Pages 1403-1414]
• Abedini, Asghar Mathematical Modeling of Platinum and Chlorine Distributions within Pt-Sn/Al2O3 Catalyst Prepared by Impregnation [Volume 22, Issue 3, 2015, Pages 981-991]
• Abedini, M. KBr Catalyzed Oxidation of Alcohols and Trimethylsilyl and Tetrahydropyranyl Ethers with Fe(NO3)3.9H2O [Volume 15, Issue 4, 2008]
• Abedini, M. Using identical system synchronization with fractional adaptation law for identication of a hyper-chaotic system [Volume 21, Issue 6, 2014, Pages 1920-1932]
• Abedini, M. Smart microgrid educational laboratory: An integrated electric and communications infrastructure platform [Volume 29, Issue 5, 2022, Pages 2552-2565]
• Abedini, M. J. Proposing a global sensitivity analysis method for linear models in the presence of correlation among input variables [Volume 23, Issue 2, 2016, Pages 399-406]
• Abedinnia, Hamid Consideration of transportation lags in Two-machine Flowshop scheduling problem [Volume 20, Issue 6, 2013, Pages 2215-2223]
• Abediny, Mohammad Comparison of Nonlinear Filtering Techniques for Inertial Sensors Error Identification in INS/GPS Integration [Volume 25, Issue 3, 2018, Pages 1281-1295]
• Abel, M. D. Synthesis, Calcium Antagonistic Activity and Structure-Activity Relationships of Cycloalkylesters... [Volume 4, Issue 3, 1997]
• Abessi, M. Designing an economical acceptance sampling plan in the presence of inspection errors based on maxima nomination sampling method [Volume 25, Issue 3, 2018, Pages 1701-1711]
• Ab Ghani, A. Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel [Volume 24, Issue 3, 2017, Pages 1000-1009]
• Abi, Fereshteh Characterization and application of pyrazinium di(hydrogen sulfate) as a highly efficient catalyst for synthesis of 14-aryl-14H-dibenzo[aj]xanthenes, 9-aryl-1,8-dioxo-octahydroxanthenes and 1-amidoalkyl/carbamatoalkyl-2-naphthols [Volume 22, Issue 6, 2015, Pages 2271-2281]
• Abid, Hasna Numerical and experimental investigation of inlet velocity influence on airflow characteristics for indoor thermal comfort [(Articles in Press)]
• Abid, M. Stress Variation in the Flange of a Gasketed Flanged Pipe Joint During Bolt up and Operating Conditions [Volume 13, Issue 3, 2006]
• Abid, M. Investigating the impact of simple and mixture priors on estimating sensitive proportion through a general class of randomized response models [Volume 26, Issue 2, 2019, Pages 1009-1022]
• Abid, M. Improved Ratio Estimators of Variance Based on Robust Measures [Volume 26, Issue 4, 2019, Pages 2484-2494]
• Abid, M. Enhancing efficiency of ratio-type estimators of population variance by a combination of information on robust location measures [Volume 27, Issue 4, 2020, Pages 2040-2056]
• Abid, M. An efficient mixed-memory-type control chart for normal and non-normal processes [Volume 28, Issue 3, 2021, Pages 1736-1749]
• Abid, M. An improved and robust class of variance estimator [Volume 28, Issue 6, 2021, Pages 3589-3601]
• Abid, M. A novel improved class of ratio-product type exponential estimators of population variance [Volume 29, Issue 4, 2022, Pages 2115-2133]
• Abidi, Awatef A review of convective heat transfer in cavity-channel assemblies [(Articles in Press)]
• Abiri, E. Modified quasi-Y-source converter for increasing boost factor [Volume 27, Issue 3, 2020, Pages 1494-1505]
• Abishev, K. Multi-flute drill-broach for precision machining of holes [Volume 26, Issue 3, 2019, Pages 1415-1426]
• Abodayeh, Kamaleldin Numerical Analysis of Hybrid Nanomaterial fluid flow with Dust Particles over a Permeable Vertical Wedge [(Articles in Press)]
• Abolbashari, Mohammad Hossein Analytical solution for coupled non-Fickian diffusion-thermoelasticity and thermoelastic wave propagation analysis [Volume 25, Issue 4, 2018, Pages 2077-2086]
• Abolfazli Esfahani, Javad Detailed Investigation of Hydrodynamics and Thermal Behaviors of Rarefied Shear Driven Flow Using DSMC [Volume 20, Issue 4, 2013, Pages 1228-1240]
• Abolhassani Soorki, Ali Synthesis of dihydropyrido[2,3-d]pyrimidine derivatives in the presence of sulfonic acid functionalized SBA-15 and the study of their antimicrobial activities [Volume 22, Issue 6, 2015, Pages 2319-2325]
• Aboluwoye, C.O. Thermodynamic Denaturation of Human Hemoglobin A in Aqueous Sodium n-Dodecyl Sulphate as a Function of pH [Volume 9, Issue 2, 2002]
• Aboluwoye, C.O. Effect of Heme and Suiphydryl Reagents on Reactivity of the 3-39 Suiphydryl... [Volume 4, Issue 3, 1997]
• Abooie, M. H. An integrated model for optimal selection of quality, maintenance, and production parameters with autocorrelated data [Volume 31, Issue 3, 2024, Pages 206-227]
• Abooie, M.H. An Analytic Variable Limit np Control Chart [Volume 17, Issue 1, 2010]
• Abooie, M.H. A POMDP framework to find optimal policy in sustainable maintenance [Volume 27, Issue 3, 2020, Pages 1544-1561]
• Abootalebi, S. Multiple-attribute group decision making using a modified TOPSIS method in the presence of interval data [(Articles in Press)]
• Abouali, O. Nano-Particle Beam Focusing in Aerodynamic Lenses - An Axisymmetric Model [Volume 14, Issue 3, 2007]
• Aboutalebi, Mohammad The variations of breakup and non-breakup regions for ferrofluid microdroplets in T-junctions with a proposed correlation [(Articles in Press)]
• Aboutorabi Kashani, Mahsa Shared autonomous vehicle with pooled service, a modal shift approach [(Articles in Press)]
• Ab Rashid, M. F. F. Optimization of two-sided assembly line balancing with resource constraints using modified particle swarm optimisation [Volume 29, Issue 4, 2022, Pages 2084-2098]
• Abrishamchi, A. A fuzzy multi-criteria approach to sustainable island-based tourism development [Volume 28, Issue 2, 2021, Pages 682-699]
• Abrishami, J. Riprap design at bridge piers with limited scouring [Volume 27, Issue 2, 2020, Pages 588-595]
• Abrishami, S.J. An integrated lot-sizing model with supplier and carrier selection and quantity discounts considering multiple products [Volume 27, Issue 4, 2020, Pages 2140-2156]
• Abrishami Moghaddam, H. Discrete Particle Swarm Optimization for Player Trajectory Extraction in Soccer Broadcast Videos [Volume 22, Issue 3, 2015, Pages 1031-1044]
• Abro, K.A. An analytic and mathematical synchronization of micropolar nanofluid by Caputo-Fabrizio approach [Volume 26, Issue 6, 2019, Pages 3917-3927]
• Abshar, E. Population Capacity Threats to Urban Area Resiliency: Observations on Chaotic Transportation Network Behavior [Volume 23, Issue 4, 2016, Pages 1675-1688]
• Abtahi, M. Comparison of CDMA and TDMA in AWGN Channels [Volume 7, Issue 3, 2000]
• Abtahi, S.A. Experimental behavior of circular foundations on oil contaminated sand [Volume 27, Issue 1, 2020, Pages 80-87]
• Abtahi, Z. Predictive heuristics for generating robust and stable schedules in single-machine systems under disruption [Volume 27, Issue 5, 2020, Pages 2592-2603]
• Abu Bakar, W. A. W. Photocatalytic Degradation and Reaction Pathway Studies of Chlorinated Hydrocarbons in Gaseous Phase [Volume 17, Issue 1, 2010]
• Abu Bakar, W. A. W. Manganese Oxide Doped Noble Metals Supported Catalyst for Carbon Dioxide Methanation Reaction [Volume 17, Issue 2, 2010]
• Abu Bakar, W. A. W. Photodegradation of N-Methyldiethanolamine over ZnO/SnO2 Coupled Photocatalysts [Volume 17, Issue 2, 2010]
• Abujiya, Mu’azu Ramat New EWMA S2 Control Charts for Monitoring Process Dispersion [Volume 24, Issue 1, 2017, Pages 378-389]
• Abvabi, A. A Numerical Study on the Eect of Accident Conguration on Pedestrian Lower Extremity Injuries [Volume 16, Issue 5, 2009]
• Adak, S. Imperfect production in three-layer supply chain systems incorporating deterioration and screening effect [Volume 29, Issue 5, 2022, Pages 2610-2627]
• Adarsh, S. Prediction of Longitudinal Dispersion Coefficient in Natural Channels Using Soft Computing Techniques [Volume 17, Issue 5, 2010]
• Adegun, I. k. Experimental and numerical investigation of flow behaviors of some selected food supplements in modeled intestine [Volume 30, Issue 1, 2023, Pages 39-51]
• Adekunle, A. Development and analysis of friction material for eco- friendly brake pad using seashell composite [Volume 30, Issue 5, 2023, Pages 1562-1571]
• Adel, Farhad An investigation into the accelerometer mounting effects on signal transmissibility in modal measurements [Volume 24, Issue 5, 2017, Pages 2436-2444]
• Adel, W. On numerical solutions of telegraph, viscous, and modified Burgers equations via Bernoulli collocation method [Volume 31, Issue 1, 2024, Pages 43-54]
• Adeleke, A. Development and analysis of friction material for eco- friendly brake pad using seashell composite [Volume 30, Issue 5, 2023, Pages 1562-1571]
• Adeli, H. Feature extraction and classication techniques for health monitoring of structures [Volume 22, Issue 6, 2015, Pages 1931-1940]
• Adeli, H. Central force metaheuristic optimisation [Volume 22, Issue 6, 2015, Pages 1941-1953]
• Adeli, H. Current efforts for prediction and assessment of natural disasters: Earthquakes, tsunamis, volcanic eruptions, hurricanes, tornados, and floods [Volume 24, Issue 6, 2017, Pages 2645-2664]
• Adeli, H. Wireless smart sensors for monitoring the health condition of civil infrastructure [Volume 25, Issue 6, 2018, Pages 2913-2925]
• Adeli, H. Nonlinear measurements for feature extraction in structural health monitoring [Volume 26, Issue 6, 2019, Pages 3051-3059]
• Adeli, H. Machine learning in structural engineering [Volume 27, Issue 6, 2020, Pages 2645-2656]
• Adeli, Hojjat PLACEMENT OF CONTROL DEVICES FOR PASSIVE, SEMI-ACTIVE, AND ‎ACTIVE VIBRATION CONTROL OF STRUCTURES [Volume 20, Issue 6, 2013, Pages 1567-1578]
• Adeli, Hojjat Recent advances in health monitoring of civil structures [Volume 21, Issue 6, 2014, Pages 1733-1742]
• Adeli, Hojjat HYBRID MULTIPLE CRITERIA DECISION MAKING METHODS: A REVIEW OF APPLICATIONS IN ENGINEERING [Volume 23, Issue 1, 2016, Pages 1-20]
• Adeli, Hojjat HYBRID MULTIPLE CRITERIA DECISION MAKING METHODS: A REVIEW OF APPLICATIONS IN ENGINEERING [Volume 23, Issue 1, 2016, Pages 1-20]
• Adeli, Hojjat Neurocomputing in Civil Infrastructure [Volume 23, Issue 6, 2016, Pages 2417-2428]
• Adeli, Hojjat Computational Earthquake Engineering of Bridges [Volume 17, Issue 5, 2010]
• Adeli, Mohsen Synthesis of Graphene/Gold Hybrid Nanomaterials by Poly(ethylene glycol) Linkers [Volume 21, Issue 3, 2014, Pages 1163-1173]
• Adelifard, M. The study of the morphology and structural, optical, and J-V characterizations of (CH3NH3PbI3) perovskite photovoltaic cells in ambient atmosphere [Volume 28, Issue 3, 2021, Pages 1939-1952]
• Adelzadeh, M. An Improved Non-Linear Physical Modeling Method for Brace Elements [Volume 16, Issue 1, 2009]
• Adelzadeh, M. R. A Technical Feasibility Analysis to Apply Pseudomonas aeroginosa MR01 Biosurfactant in Microbial Enhanced Oil Recovery of Low-Permeability Carbonate Reservoirs of Iran [Volume 17, Issue 1, 2010]
• Adeniyi, A. G. Evaluating the nature of captured exhaust soot from a retort heating carbonization system [Volume 29, Issue 3, 2022, Pages 1427-1435]
• Adetunji, Olufemi An economic order quantity model for two deteriorating items with mutually complementary price and time dependent demand [(Articles in Press)]
• Adib, A. Development of a new integrated method for generation of IDF curves based on three scenarios of climatic changes [Volume 26, Issue 2, 2019, Pages 742-751]
• Adib, A. Prediction of meteorological and hydrological phenomena in different climatic scenarios in the Karkheh watershed (southwest of Iran) [Volume 27, Issue 4, 2020, Pages 1814-1825]
• Adib, A. Estimation of mixed-mode fracture parameters by gene expression programming [Volume 27, Issue 1, 2020, Pages 229-238]
• Adibi, M. A. Simulation-based optimization using DEA and DOE in production systems [Volume 29, Issue 6, 2022, Pages 3470-3488]
• Adibi, Mohammad Amin A Mathematical Model for Lot-streaming Hybrid Flow Shop Scheduling Problem by Considering Learning Effect and Buffer Capacity [(Articles in Press)]
• Adibi, O. The response of nano-ceramic doped fluids in heat convection models: A characteristics-based numerical approach [Volume 28, Issue 5, 2021, Pages 2671-2683]
• Adibi, Omid The variations of breakup and non-breakup regions for ferrofluid microdroplets in T-junctions with a proposed correlation [(Articles in Press)]
• Adibi, T. The response of nano-ceramic doped fluids in heat convection models: A characteristics-based numerical approach [Volume 28, Issue 5, 2021, Pages 2671-2683]
• Adib‎, Mehdi Sodium alginate: A renewable and very effective biopolymer catalyst for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones [Volume 21, Issue 6, 2014, Pages 2076-2081]
• Adibnazari, S. Non-Symmetrical Plane Contact of a Wedge Indenter [Volume 12, Issue 4, 2005]
• Adibnazari, S. A new model for predicting fretting fatigue crack initiation life based on effective slip amplitude [Volume 30, Issue 4, 2023, Pages 1255-1264]
• Aditya, G. Sensitivity Based Health Monitoring of Structures with Static Response [Volume 15, Issue 3, 2008]
• Adiutantov, N. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]
• Adlparvar, M. R. An intuitionistic fuzzy weighting and ranking model to evaluate the financing challenges of urban development with public-private partnership projects [Volume 30, Issue 3, 2023, Pages 877-890]
• Adlparvar, M.R. An intuitionistic fuzzy multi-class approach to risk assessment for sustainable BOT highway construction projects: A case study [Volume 31, Issue 7, 2024, Pages 569-587]
• Admane, S. Design and Development of Cam-Operated in-Pipe Robot (CIPR) [(Articles in Press)]
• Aela, P. Optimization of FFU synthetic sleeper shape in terms of ballast lateral resistance [Volume 28, Issue 6, 2021, Pages 3046-3057]
• A. Farid, H. M. Cost effective indoor HVAC energy efficiency monitoring based on intelligent decision support system under fermatean fuzzy framework [Volume 30, Issue 6, 2023, Pages 2143-2161]
• Afghani Khoraskani, R. A new simplied formula in prediction of the resonance velocity for multiple masses traversing a thin beam [Volume 23, Issue 1, 2016, Pages 133-141]
• Afjei, S. E. Analytical method for optimal design of synchronous reluctance motor for electric scooter application [Volume 29, Issue 5, 2022, Pages 2537-2551]
• Afkar, A. Effect of the magnetic field of a current-carrying conductor on the vibrations of magnetoelastic plate structures [Volume 30, Issue 6, 2023, Pages 1973-1986]
• Aflaki, E. Study on the failure behavior of three dierent stabilized problematic soils [Volume 21, Issue 4, 2014, Pages 1231-1240]
• Aflaki, E. Study on the failure behavior of three dierent stabilized problematic soils [Volume 21, Issue 4, 2014, Pages 1231-1240]
• Aflaki, E. Modeling the Effect of Parking Fare on Personal Car Use [Volume 17, Issue 3, 2010]
• Aflaki, N. Variance-based features for keyword extraction in Persian and English text documents [Volume 27, Issue 3, 2020, Pages 1301-1315]
• Aflaki, S. Application of TiO2/ZnFe2O4/glycine nanocatalyst to the treatment of methyl orange dye from aqueous solution: Impacts of dissolved mineral salts on dye removal efficiency [Volume 28, Issue 3, 2021, Pages 1464-1477]
• Afrabandpei, Fariborz Design of a multi-stage transportation network in a supply chain system: Formulation and efficient solution procedure [Volume 20, Issue 6, 2013, Pages 2188-2200]
• Afraseab, Cheshmavar Assessing Human Performance Influencing Factors through LINMAP and Bayesian Belief Networks [(Articles in Press)]
• Afrasiab, H. Numerical study of the effects of process parameters on the tool life in the cold radial ‎forging process [Volume 21, Issue 2, 2014, Pages 339-346]
• Afrasiab, H. Numerical and analytical approaches for improving the die design in the radial forging process of tubes without mandrel [Volume 23, Issue 1, 2016, Pages 167-173]
• Afrasiab, H. Numerical and experimental study of the effect of the process parameters on the void evolution in the cold extrusion of rods [Volume 27, Issue 1, 2020, Pages 287-294]
• Afrasiab, H. A study on the effect of the die transverse angle and the part rotational feed angle in the cold radial forging process of rods [Volume 31, Issue 8, 2024, Pages 646-658]
• Afrazeh, Abbas A new model to optimize the knowledge exchange in industrial cluster: A case study of Semnan plaster production industrial cluster [Volume 24, Issue 2, 2017, Pages 834-846]
• Afreidoun, M.Hossein Experimental and numerical study of a proposed moment-resisting connection for precast concrete frames [Volume 25, Issue 4, 2018, Pages 1977-1986]
• Afsahi, M. Optimizing decisions on under- and out-of-warranty products in a finite planning horizon [Volume 27, Issue 1, 2020, Pages 494-515]
• Afsari, S. A. Optimal design and analysis of a novel reluctance axial flux magnetic gear [Volume 29, Issue 3, 2022, Pages 1573-1580]
• Afsari, S.A. Viable Arcuate Double-sided Magnetic Gear for Competitive Torque Density Transmission Capability [Volume 23, Issue 3, 2016, Pages 1251-1260]
• Afsar Khan, A. Examining the behavior of MHD micropolar fluid over curved stretching surface based on the modified Fourier law [Volume 28, Issue 1, 2021, Pages 223-230]
• Afshan Soomro, G. Microwave-assisted green synthesis of guar gum esters with enhanced physicochemical properties [Volume 26, Issue 3, 2019, Pages 1474-1484]
• Afshar, A. Multi-period aerobic groundwater bioremediation system design; ACO approach [Volume 21, Issue 3, 2014, Pages 479-469]
• Afshar, A. Improved Ant Colony Optimization Algorithm for Reservoir Operation [Volume 13, Issue 3, 2006]
• Afshar, A. Anodizing of Titanium in NaOH Solution and its Corrosion Resistance in PBS Physiologic Solution [Volume 10, Issue 3, 2003]
• Afshar, A. The Effect of Concentration and PH of Magnesium Chloride.... [Volume 4, Issue 4, 1998]
• Afshar, Amir Numerical Study of the Agglomerates Dispersion Behavior in Shear and Elongational Flow Fields in Viscous Media Using Population Balance Modeling (PBM) [Volume 21, Issue 6, 2014, Pages 2107-2115]
• Afshar, M. H. Solution of Convection-Dominated Problems on Irregular Meshes by Collocated Discrete Least Squares Mesh-Less (CDLSM) Method [Volume 17, Issue 5, 2010]
• Afshar, M.H. Mixed discrete least square meshless method for solution of quadratic partial differential equations [Volume 21, Issue 3, 2014, Pages 492-504]
• Afshar, M.H. A Convergent Genetic Algorithm for Pipe Network Optimization [Volume 12, Issue 4, 2005]
• Afshar, M.H. A Two-Stage Penalty Method for Discrete Optimization of Pipe Networks [Volume 11, Issue 4, 2004]
• Afshar, M.H. Application of a Genetic Algorithm to Storm Sewer Network Optimization [Volume 13, Issue 3, 2006]
• Afshar, M.H. Evaluation of Selection Algorithms for Simultaneous Layout and Pipe Size Optimization of Water Distribution Networks [Volume 14, Issue 1, 2007]
• Afshar, M.H. Application of a Compact Genetic Algorithm to Pipe Network Optimization Problems [Volume 16, Issue 3, 2009]
• Afshar, M.H. Elitist-Mutated Ant System Versus Max-Min Ant System: Application to Pipe Network Optimization Problems [Volume 16, Issue 4, 2009]
• Afshar, M.H. Application of an Ant Colony Optimization Algorithm for Optimal Operation of Reservoirs: A Comparative Study of Three Proposed Formulations [Volume 16, Issue 4, 2009]
• Afshar, M.H. A Comparison of Three Adaptive Finite Element Renement Techniques for Incompressible Navier-Stokes Equations Using a CBS Scheme [Volume 16, Issue 4, 2009]
• Afshar, M.H. Predicting Density and Compressive Strength of Concrete Cement Paste Containing Silica Fume Using Articial Neural Networks [Volume 16, Issue 1, 2009]
• Afshar, M.H. Application of Particle Swarm Optimization to Optimal Design of Cascade Stilling Basins [Volume 16, Issue 1, 2009]
• Afshar, M.H. Study of Early-Age Creep and Shrinkage of Concrete Containing Iranian Pozzolans: An Experimental Comparative Study [Volume 16, Issue 2, 2009]
• Afshar, M.H. An Adaptive Relaxed Cellular Automata Method for Reliability-Based Hydropower Operation of Reservoirs [Volume 24, Issue 5, 2017, Pages 2294-2306]
• Afshar, M.H. Mixed discrete least squares meshless method for solving the linear and non-linear propagation problems [Volume 25, Issue 2, 2018, Pages 565-578]
• Afshar, M.H. Collocated Mixed Discrete Least Squares Meshless (CMDLSM) method for solving quadratic partial differential equations [Volume 25, Issue 4, 2018, Pages 2000-2011]
• Afshar, Mohammad Hadi RPIM and RPIM-MLS based MDLSM method for the solution of elasticity problems [Volume 23, Issue 6, 2016, Pages 2458-2468]
• Afshar, M. R. The root causes of construction project failure [Volume 25, Issue 1, 2018, Pages 93-108]
• AFSHAR, M. H. Layout and Size Optimization of Sewer Networks by hybridizing the GHCA Model with Heuristic Algorithms [Volume 22, Issue 6, 2015, Pages 2069-2069]
• Afshar Ebrahimi, A. Comparison of γ and δ-Al2O3 supported CoMo catalysts in the ydrodesulfurization of straight-run gas oil [Volume 26, Issue 3, 2019, Pages 1555-1565]
• Afshar Ebrahimi, Ali Preparation of extruded alumina with suitable crushing strength and good stability [Volume 25, Issue 3, 2018, Pages 1434-1439]
• Afsharfard, Aref An Efficient Concept for Non-dimensionalizing the Duffing Equations Based on the Parameterized Perturbation Method [Volume 20, Issue 5, 2013, Pages 1455-1463]
• Afshari, J. Investigating the effects of impact directions on improving head injury index [Volume 27, Issue 4, 2020, Pages 1867-1877]
• Afshari, S. Design, modeling, and impedance control of a new in-pipe inspection robot equipped by a manipulator [Volume 28, Issue 1, 2021, Pages 355-370]
• Afshar Nadjafi, B. A branch and bound algorithm for the weighted earliness-tardiness project scheduling problem with generalized precedence relations [Volume 16, Issue 1, 2009]
• Afshar-Nadjafi, B. An equity-oriented multi-objective inventory management model for blood banks considering the patient conditions: A real-life case [Volume 30, Issue 5, 2023, Pages 1875-1897]
• Afshar-Nadjafi‎, Behrouz Solution procedure for generalized resource investment problem with discounted cash flows and progress payment [Volume 21, Issue 6, 2014, Pages 2436-2447]
• Afshar Najafi, Behrouz Design of a multi-stage transportation network in a supply chain system: Formulation and efficient solution procedure [Volume 20, Issue 6, 2013, Pages 2188-2200]
• Afshar Sedigh, A. H. An imperfect multi-item single-machine production system with shortage, rework, and scrap considering inspection, dissimilar deficiency levels, and non-zero setup times [Volume 26, Issue 1, 2019, Pages 557-570]
• Afshar Sedigh, A. H. Cost function and optimal boundaries for a two-level inventory system with information sharing and two identical retailers [Volume 26, Issue 1, 2019, Pages 472-485]
• Afshar Sedigh, Amir Hosein Multi-machine economic production quantity for items with scrapped and rework with shortages and allocation decisions [Volume 25, Issue 4, 2018, Pages 2331-2346]
• Afshin, H. Improving Mechanical Properties of High Strength Concrete by Magnetic Water Technology [Volume 17, Issue 1, 2010]
• AFSHIN, HOSSEIN Theoretical and experimental investigation of density jump on an inclined surface [Volume 21, Issue 5, 2014, Pages 1655-1665]
• Afshin Hemmatyar, Ali Mohammad CMORC: Class-based Multipath On-demand Routing Protocol for Cognitive Radio Networks [Volume 24, Issue 6, 2017, Pages 3117-3131]
• Aftab, M. Efficient estimation of Pareto model using modified maximum likelihood estimators [Volume 26, Issue 1, 2019, Pages 605-614]
• Aftabi Sani, A. Calculation of coupled modes of fluid-structure systems by pseudo symmetric subspace iteration method [Volume 26, Issue 4: Special Issue Dedicated to Professor Abolhassan Vafai, 2019, Pages 2100-2107]
• Aftabi Sani, Ahmad A Simple Iterative Method for Dynamic Analysis of MDOF Systems with Arbitrary Time-Varying Coefficients Based on Successive Differentiation [(Articles in Press)]
• Afzal, S. Synthesis, characterization and biological screening of different carbamates derived from 7-hydroxy-4-methyl-2H-1-benzopyran-2-one [Volume 22, Issue 6, 2015, Pages 2241-2248]
• Afzali, S. H. Bridge backwater estimation: A comparison between artificial intelligence models and explicit equations [Volume 28, Issue 2, 2021, Pages 573-585]
• Afzali, S. H. A solution for unconfined groundwater flow: An innovative approach based on the lattice Boltzmann method [Volume 28, Issue 5, 2021, Pages 2493-2503]
• Afzali, S.-H. Gene-expression programming to predict the local scour depth at downstream of stilling basins [Volume 23, Issue 1, 2016, Pages 102-113]
• AfzaliTabar, M. Preference of Nano porous graphene to Single-Walled Carbon Nanotube (SWCNT) for preparing Silica Nano hybrid Pickering Emulsion for potential Chemical Enhanced Oil Recovery (C-EOR) [Volume 24, Issue 6, 2017, Pages 3491-3499]
• Afzalsoltani, S. Effectiveness of a vertical micropile system in mitigating the liquefaction-induced lateral spreading effects on pile foundations: 1 g large-scale shake table tests [Volume 29, Issue 3, 2022, Pages 1038-1058]
• Afzalsoltani, Sina Pile group behavior under unsymmetrical cyclic thermal loading in dry silty sand: 1g Physical modeling [(Articles in Press)]
• Afzalzadeh, R. An Investigation on Effects of Applied Magnetic Field during Zn Vacuum Thermal Evaporation on ZnO Nanostructures [Volume 24, Issue 6, 2017, Pages 3526-3530]
• Agarwal, Nikunj Some improved interactive aggregation operators under interval-valued intuitionistic fuzzy environment and its application to decision making process [Volume 24, Issue 5, 2017, Pages 2581-2604]
• Aggarwal, Bhawna A Fractional-Order Meminductor Emulator with Applications in Chaotic Oscillator [(Articles in Press)]
• Aghababaee, Zahra Robust economic-statistical design of multivariate exponentially weighted moving average control chart under uncertainty with intervaldata [Volume 22, Issue 3, 2015, Pages 1189-1202]
• Aghababayi, Hamzeh Designing an Effective Blockchain-Based Service Supply Chain using Integrated FANP-QFD under Uncertainty [(Articles in Press)]
• AghaBabazadeh, Babak Dynamic Network Pricing to Contain Urban Air Pollutionin Stochastic Environment [Volume 23, Issue 5, 2016, Pages 2005-2022]
• Aghaei, J. Mixed Integer Programming of Security-Constrained Daily Hydrothermal Generation Scheduling(SCDHGS) [Volume 20, Issue 6, 2013, Pages 2036-2050]
• Aghaei, J. Expansion planning of automated sub-transmission and distribution networks integrated by distributed generations [Volume 29, Issue 2, 2022, Pages 645-659]
• Aghaei, M. Study of the effect of organic binders on 13X zeolite agglomeration and their CO2 adsorption properties [Volume 26, Issue 3, 2019, Pages 1497-1504]
• Aghaei Araei, A. Measuring wave velocity, damping and stress-strain behaviors of geo-materials using GAP-SENSOR [Volume 22, Issue 3, 2015, Pages 679-698]
• Aghaei Araei, A. Measuring wave velocity, damping and stress-strain behaviors of geo-materials using GAP-SENSOR [Volume 22, Issue 3, 2015, Pages 679-698]
• Aghaei Araei, A. Large-Scale Triaxial Testing and Numerical Modeling of Rounded and Angular Rockfill Materials [Volume 17, Issue 3, 2010]
• Aghaei Araei, A. Dynamic Properties of Gravelly Materials [Volume 17, Issue 4, 2010]
• Aghaei Araei, Ata Rate-Dependence of Rockfill Behavior on Propagated Near Fault Ground Motions [Volume 21, Issue 4, 2014, Pages 1263-1280]
• Aghaei Araei, Ata Loading frequency effect on dynamic properties of mixed sandy soils [Volume 25, Issue 5, 2018, Pages 2461-2479]
• Aghaie, A. Simulation-based optimization of a stochastic supply chain considering supplier disruption: Agent-based modeling and reinforcement learning [Volume 26, Issue 6, 2019, Pages 3780-3795]
• Aghaie, A. Robust optimization for the resource-constrained multi-project scheduling problem with uncertain activity durations [Volume 27, Issue 1, 2020, Pages 361-376]
• Aghaie, A. Urban transportation network reliability calculation considering correlation among the links comprising a route [Volume 29, Issue 3, 2022, Pages 1742-1754]
• Aghaie, A. Statistical adjustment and calibration of complex systems considering multiple outputs: Case study of laser-assisted micromachining process [Volume 29, Issue 6, 2022, Pages 3394-3403]
• Aghaie, Abdolah A Non-Convex Robust Simulation Optimization Model for Inventory Management Problem by System Dynamics [(Articles in Press)]
• Aghaie-Khafri, M. Nano-grain refinement and strengthening of copper under room temperature RUE process [Volume 26, Issue 1, 2019, Pages 445-454]
• Aghajani, Dordaneh Resilient cities, a key solution to safeguard the environment [Volume 23, Issue 5, 2016, Pages 2067-2076]
• Aghajani, Sepideh Quantitative Analysis of Stock Market Resilience during Oil Price Shocks: Evidence from seven Middle East Countries [(Articles in Press)]
• Aghajani, Yasaman Resilient cities, a key solution to safeguard the environment [Volume 23, Issue 5, 2016, Pages 2067-2076]
• Aghajani-Delavar, N. A multi-objective vibration damping optimization algorithm for solving a cellular manufacturing system with manpower and tool allocation [Volume 29, Issue 4, 2022, Pages 2041-2068]
• Aghajanzadeh, Seyyed Meisam Nonlinear Dynamic Analysis of Concrete Gravity Dam Considering Elastoplastic Constitutive Model for Foundation [Volume 20, Issue 6, 2013, Pages 1676-1684]
• Aghajari, M. Dynamic modeling of the extended mobile robot: Composed N parallel axles, suspension system, and wheels slippage [Volume 30, Issue 5, 2023, Pages 1595-1611]
• Aghakarimi, Ehsan An integrated framework to assess and improve the financial soundness of private banks [(Articles in Press)]
• Aghakouchack, A.A. Fatigue Reliability Analysis of Tubular Joints of Offshore Structures Using the Principle of Maximum Entropy [Volume 6, Issue 3, 1999]
• Aghamohagheghi, M. A new decision approach to the sustainable transport investment selection based on the generalized entropy and knowledge measure under an interval-valued Pythagorean fuzzy environment [Volume 28, Issue 2, 2021, Pages 892-911]
• Aghamohamadi-Bosjin, S. A hybrid metaheuristic algorithm for data driven leagile sustainable closed-loop supply chain modeling under disruption risk [Volume 29, Issue 3, 2022, Pages 1685-1704]
• Agha Mohammad Ali Kermani, Mehrdad The effect of network structure on the opinion-aware influence maximization problem [(Articles in Press)]
• Aghanajafi, C. A simplified analytical model for predicting the heating performance of single U-tube underground heat exchangers [Volume 28, Issue 2, 2021, Pages 847-859]
• Aghanouri, Mehrnaz Design and Development of a Robotic System for Hand’s Wrist-Fingers Rehabilitation [(Articles in Press)]
• Aghayari, Masoomeh Enhanced Antibacterial Activity of Ceftazidime Against Pseudomonas aeruginosa Using Poly(propyleneimine) Dendrimer as a Nanocarrier [Volume 22, Issue 3, 2015, Pages 1330-1336]
• Aghayari, R. Investigating the seismic behavior of RC shear walls with openings strengthened with FRP sheets using different schemes [Volume 24, Issue 4, 2017, Pages 1855-1865]
• Aghayi, N. A Malmquist productivity index with the directional distance function and uncertain data [Volume 26, Issue 6, 2019, Pages 3819-3834]
• A. Ghazijahani, H. Artificial Neural Networks Based Dynamic Weight Estimation with Optical Arrangement [Volume 17, Issue 2, 2010]
• Aghelizadeh, P. Failure analysis of the 16-story Plasco building under fire condition [Volume 29, Issue 3, 2022, Pages 1107-1124]
• Aghsami, A. A stochastic-fuzzy multi-objective model for the last-mile delivery problem using drones and ground vehicles, a case study [Volume 31, Issue 11, 2024, Pages 847-865]
• Aghsami, Amir A novel mathematical model to minimize the total cost of the hospital and COVID-19 outbreak concerning waiting time of patients using Jackson queueing networks, a case study [(Articles in Press)]
• Agiralioglu, Necati STREAMFLOW MAP OF THE EASTERN BLACK SEA REGION, TURKEY [Volume 25, Issue 3, 2018, Pages 1048-1056]
• Agrahari, S. EBG and SRR loaded triple band notched UWB antenna [Volume 31, Issue 5, 2024, Pages 458-468]
• Agrawal, G. S. Viscoelastic potential flow analysis of stability of a cylindrical jet [Volume 21, Issue 3, 2014, Pages 578-586]
• Agrawal, Renu A Reconfigurable Multi-Band Notched Semi-Circle Engraved UWB Antenna for Wireless Applications [(Articles in Press)]
• Ahadi, M.S. Effect of Turbulence Closure Models on the Accuracy of Moving Particle Semi-implicit Method for the Viscous Free Surface Flow [Volume 21, Issue 4, 2014, Pages 1217-1230]
• Ahadian, Mohammad Mahdi Synthesis and Application of Silica Aerogel-MWCNT Nanocomposites for Adsorption of Organic Pollutants [Volume 17, Issue 2, 2010]
• Ahadzadeh, Iraj Fabrication of a Cost-effective Piezoresistive Pressure Sensor Based on PVC/Reduced Graphene Oxide (rGO) Composite [(Articles in Press)]
• Ahadzadeh Namin, M. Finding an improved region of efficiency via DEA-efficient hyperplanes [Volume 25, Issue 5, 2018, Pages 2852-2866]
• Ahadzadeh Namin, M. Efficiency evaluation of a three-stage leader-follower model by data envelopment analysis with double-frontier viewpoint [Volume 28, Issue 1, 2021, Pages 492-515]
• Ahadzadeh Namin, M. Efficiency measurement for hierarchical network systems using network DEA and intuitionistic fuzzy ANP [Volume 29, Issue 4, 2022, Pages 2252-2269]
• Ahadzadeh Namin, Mahnaz The NDEA–MOP Model in the Presence of Negative Data Using Fuzzy Method [Volume 25, Issue 1, 2018, Pages 398-409]
• Ahadzadeh Namin, Mahnaz Hybrid cluster and data envelopment analysis with interval data [Volume 25, Issue 5, 2018, Pages 2904-2911]
• Ahari, Mohammad Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
• Ahlatcioglu, Mehmet An exact iterative algorithm to solve a linear fractional programming problem [(Articles in Press)]
• Ahlatcioglu Ozkok, Beyza An exact iterative algorithm to solve a linear fractional programming problem [(Articles in Press)]
• Ahmad, Anique Convection driven flow between moving diska- A non-linear approach for modelling thermal radiation [Volume 31, Issue 16, 2024, Pages 1402-1419]
• Ahmad, Aqueel Optimal sizing and allocation of Solar based Distributed Generation and Wireless Charging Station for Transportation Electrification [(Articles in Press)]
• Ahmad, B. Impact of compliant walls on magnetohydrodynamics peristalsis of Jeffrey material in a curved configuration [Volume 25, Issue 2, 2018, Pages 741-750]
• Ahmad, B. H. A triband EBG loaded microstrip fractal antenna for THz application [Volume 30, Issue 1, 2023, Pages 207-217]
• Ahmad, Bilal Temperature dependent heat generation and variable viscosity features for viscoelastic fluid with homogeneous and heterogeneous (HH) chemical reactions [(Articles in Press)]
• Ahmad, F. Analytical study on couple stress fluid in an inclined channel [Volume 28, Issue 4, 2021, Pages 2164-2175]
• Ahmad, I. L-Moments and calibration-based variance estimators under double stratified random sampling scheme: Application of Covid-19 pandemic [Volume 30, Issue 2, 2023, Pages 814-821]
• Ahmad, I. Mean estimation using robust quantile regression with two auxiliary variables [Volume 30, Issue 3, 2023, Pages 1245-1254]
• Ahmad, L. The application of non-Fourier and Fick's laws to the flow of temperature-dependent thermal conductivity generalized Newtonian liquids: A 3D computational study [Volume 26, Issue 3, 2019, Pages 1516-1528]
• Ahmad, M. On a new family of Kies Burr III distribution: Development, properties, characterizations, and applications [Volume 27, Issue 5, 2020, Pages 2555-2571]
• Ahmad, N. CFD investigation of an axial compressor with casing treatment for the enhancement of the stall margin [Volume 28, Issue 6, 2021, Pages 3156-3167]
• Ahmad, Riaz INTELLIGENT PHEROMONE UP GRADATION MECHANISM THROUGH NEURAL AUGMENTED ANT COLONY OPTIMIZATION (NaACO) META HEURISTIC IN MACHINE SCHEDULING [Volume 21, Issue 5, 2014, Pages 1726-1731]
• Ahmad, S. On enhanced sensitivity of nonparametric EWMA control charts for process monitoring [Volume 24, Issue 1, 2017, Pages 424-438]
• Ahmad, S. MHD forced convection ow and heat transfer of ferro fluids over a moving at plate with uniform heat flux and second-order slip effects [Volume 25, Issue 4, 2018, Pages 2186-2197]
• Ahmad, S. Experimental investigation of bond characteristics of deformed and plain bars in low strength concrete [Volume 25, Issue 6, 2018, Pages 2954-2966]
• Ahmad, S. Simulation analysis of mass and heat transfer attributes in nanoparticle flow subject to Darcy-Forchheimer medium [Volume 29, Issue 4, 2022, Pages 1828-1837]
• Ahmad, S. Impact of viscous dissipation on MHD darcy-forchheimer nanoliquid flow comprising gyrotactic microorganisms past a nonlinear extending surface [Volume 30, Issue 6, 2023, Pages 2235-2244]
• Ahmad, S.H. Analytical Model for Shear Critical Reinforced Concrete Members Under Static Loads [Volume 1, Issue 2, 1994]
• Ahmad, Shabbir On Auxiliary Information Based Improved EWMA Median Control Charts [Volume 25, Issue 2, 2018, Pages 954-982]
• Ahmad, Shahbaz Dynamical properties of Nonlinear oscillators by the variational iteration method [(Articles in Press)]
• Ahmad, Shahzad Convection driven flow between moving diska- A non-linear approach for modelling thermal radiation [Volume 31, Issue 16, 2024, Pages 1402-1419]
• Ahmad, T. Efficient estimation of Pareto model using modified maximum likelihood estimators [Volume 26, Issue 1, 2019, Pages 605-614]
• Ahmad, T. A new nonparametric composite exponentially weighted moving average sign control chart [Volume 29, Issue 1, 2022, Pages 290-302]
• Ahmadabadi, M Pseudo-Dynamic Active Earth Pressure Analysis of Inclined Retaining Walls Using Horizontal Slices Method [Volume 17, Issue 2, 2010]
• Ahmad Arshad, I. On the performance of median-based Tukey and Tukey-EWMA charts under rational subgrouping [Volume 28, Issue 1, 2021, Pages 547-556]
• Ahmadi, A. Development of Management Schemes in Irrigation Planning: Economic and Crop Pattern Consideration [Volume 16, Issue 6, 2009]
• Ahmadi, A. Mixed Integer Programming of Security-Constrained Daily Hydrothermal Generation Scheduling(SCDHGS) [Volume 20, Issue 6, 2013, Pages 2036-2050]
• Ahmadi, A. Amplitude reconstruction of clipped OFDM by using DFT-based least squares [Volume 24, Issue 3, 2017, Pages 1353-1362]
• Ahmadi, A. Exergy-economic-environment optimization of the waste-to-energy power plant using Multi-Objective Particle-Swarm Optimization (MOPSO) [Volume 28, Issue 5, 2021, Pages 2733-2750]
• Ahmadi, Abbas Developing simulation based optimization mechanism for a novel stochastic reliability centered maintenance problem [Volume 25, Issue 5, 2018, Pages 2788-2806]
• Ahmadi, Aida Resilient approach toward urban development in lake catchments, case of Urmia Lake [Volume 23, Issue 4, 2016, Pages 1627-1632]
• Ahmadi, Aida Resilient cities, a key solution to safeguard the environment [Volume 23, Issue 5, 2016, Pages 2067-2076]
• Ahmadi, Ali R . Method of Fundamental Solution (MFS) coupled with particle swarm optimization (PSO) to determine optimal phreatic line in unconfined seepage problem [Volume 20, Issue 5, 2013, Pages 1327-1336]
• Ahmadi, Atefeh A Novel Mega-stable System with Attractors in Real-life Object Shapes [(Articles in Press)]
• Ahmadi, B. A generalized differential quadrature-based computational model for describing free vibrations behavior of functionally graded circular plates around buckled configuration [Volume 29, Issue 3, 2022, Pages 1250-1264]
• Ahmadi, Elham A New Fuzzy ELECTRE Based Multiple Criteria Method for Personnel Selection [Volume 25, Issue 2, 2018, Pages 943-953]
• Ahmadi, F. Ultrasonic bone-cutting: Experimental investigation and statistical analyses of cutting forces [Volume 28, Issue 4, 2021, Pages 2213-2228]
• Ahmadi, Farhad Seismic Energy Dissipation in Bridges with Air Springs [Volume 22, Issue 6, 2015, Pages 1954-1963]
• Ahmadi, G. Numerical Simulation of Free-Surface Waves and Wave Induced Separation [Volume 15, Issue 3, 2008]
• Ahmadi, G. Overview of Computational and Analytical Modeling of Particle Transport and Deposition in Turbulent Flows [Volume 1, Issue 1, 1994]
• Ahmadi, G. Overview of Base Isolation, Passive and Active Vibration Control Strateies for Aseismic... [Volume 2, Issue 2, 1995]
• Ahmadi, G. Computational Simulation of Marangoni Convection Under Microgravity Condition [Volume 16, Issue 6, 2009]
• Ahmadi, G. Effect of Dierent Geometries in Simulation of 3D Viscous Flow in Francis Turbine Runners [Volume 16, Issue 4, 2009]
• Ahmadi, G. Eect of Different Configurations on 3-D Analysis of Flow Through Stay Vanes and Guide Vanes of a Francis Turbine [Volume 17, Issue 6, 2010]
• Ahmadi, G. Submicron particle deposition in pulmonary alveoli during cyclic breathing [Volume 24, Issue 4, 2017, Pages 1975-1984]
• Ahmadi, G. Investigation of particle deposition and dispersion using hybrid LES/RANS model based on lattice Boltzmann method [Volume 25, Issue 6: Special Issue Dedicated to Professor Goodarz Ahmadi, 2018, Pages 3173-3182]
• Ahmadi, G. Numerical evaluation of the operating room ventilation performance: ultra-clean ventilation (UCV) systems [Volume 26, Issue 4, 2019, Pages 2394-2406]
• Ahmadi, G. Computer modeling of the operating room ventilation performance in connection with surgical site infection [Volume 27, Issue 2, 2020, Pages 704-714]
• Ahmadi, G. Numerical modeling of particle motion and deposition in turbulent wavy channel flows [Volume 26, Issue 4: Special Issue Dedicated to Professor Abolhassan Vafai, 2019, Pages 2229-2240]
• Ahmadi, G. Environmental impact analysis of high-rise buildings for resilient urban development [Volume 27, Issue 4, 2020, Pages 1843-1857]
• Ahmadi, G. Investigation of flow patterns around rectangular and oblong piers with collar located in a 180-degree sharp bend [Volume 28, Issue 5, 2021, Pages 2479-2492]
• Ahmadi, Goodarz Airflow patterns in a 3D model of the human acinus [Volume 24, Issue 5, 2017, Pages 2379-2386]
• Ahmadi, Goodarz Numerical modeling of sand particle erosion at return bends in gas-particle two-phase flow [Volume 25, Issue 6: Special Issue Dedicated to Professor Goodarz Ahmadi, 2018, Pages 3231-3242]
• Ahmadi, Goodarz Numerical 3D simulation of developing turbulent stratified gas-liquid flow in curved pipes consisting of entrained particles through this type of flow [Volume 25, Issue 6: Special Issue Dedicated to Professor Goodarz Ahmadi, 2018, Pages 3243-3257]
• Ahmadi, Goodarz A CLASS OF SYNCHRONIZED NONLINEAR TWO-DOF SYSTEMS WITH CLOSED FORM SOLUTION [Volume 25, Issue 6: Special Issue Dedicated to Professor Goodarz Ahmadi, 2018, Pages 3258-3273]
• Ahmadi, Goodarz Numerical simulations of gas-liquid-particle flows in three-phase slurry reactors under gravity variation [Volume 25, Issue 6: Special Issue Dedicated to Professor Goodarz Ahmadi, 2018, Pages 3197-3209]
• Ahmadi, Hassan Structural health monitoring of concrete arch dams using the wavelet transform and modal assurance criterion methods [(Articles in Press)]
• Ahmadi, H.R. A rule-based post-processing approach to improve Persian OCR performance [Volume 27, Issue 6, 2020, Pages 3019-3033]
• Ahmadi, J. Supply Chain Production Planning Using Linear Optimization [Volume 9, Issue 3, 2002]
• Ahmadi, M. Nano-grain refinement and strengthening of copper under room temperature RUE process [Volume 26, Issue 1, 2019, Pages 445-454]
• Ahmadi, M. Studying buckling of composite rods made of hybrid carbon fiber/carbon nanotube-reinforced polyimide using multi-scale FEM [Volume 27, Issue 1, 2020, Pages 252-261]
• Ahmadi, M.H. Hot-film/hot-wire anemometer calibration for low velocities using image processing [Volume 28, Issue 1, 2021, Pages 265-272]
• Ahmadi, M. J. Two Low Computational Complexity Improved Multiband Structured Subband Adaptive Filter Algorithms [Volume 28, Issue 6, 2021, Pages 3396-3411]
• Ahmadi, M. M. Numerical investigation into the static behavior of stepped soil nail walls [Volume 25, Issue 1, 2018, Pages 140-151]
• Ahmadi, M. M. Shear strength characteristics of a thermally cured sand-bentonite mixture [Volume 28, Issue 6, 2021, Pages 3030-3045]
• Ahmadi, M.M. A Numerical Study of Chamber Size and Boundary Eects on CPT Tip Resistance in NC Sand [Volume 15, Issue 5, 2008]
• Ahmadi, Mohamad Taghi Effects of groundwater table on buried pipeline response to a surface explosion [(Articles in Press)]
• Ahmadi, Mohammad Mehdi Influence of Fines Content and Type on the Small-2 strain Shear Modulus of Sand [Volume 21, Issue 4, 2014, Pages 1281-1296]
• Ahmadi, O. Monitoring process mean using a second-order filter: Signal and system approach [Volume 29, Issue 4, 2022, Pages 2210-2229]
• Ahmadi, Orod Statistical modeling and monitoring of image data in the presence of temporal and spatial correlations [(Articles in Press)]
• Ahmadi, Orod Constructing a Sensitive Control Chart to Monitor Process Mean using Optimal Filter: Time-Frequency Analysis Approach [(Articles in Press)]
• Ahmadi, S.-A. Smart microgrid educational laboratory: An integrated electric and communications infrastructure platform [Volume 29, Issue 5, 2022, Pages 2552-2565]
• Ahmadi, Salimeh Characterization and application of pyrazinium di(hydrogen sulfate) as a highly efficient catalyst for synthesis of 14-aryl-14H-dibenzo[aj]xanthenes, 9-aryl-1,8-dioxo-octahydroxanthenes and 1-amidoalkyl/carbamatoalkyl-2-naphthols [Volume 22, Issue 6, 2015, Pages 2271-2281]
• Ahmadi, V. Petahertz-frequency plasmons in graphene nanopore and their application to nanoparticle sensing [Volume 24, Issue 3, 2017, Pages 1669-1677]
• Ahmadi, Vahid Optical and Photocatalytic Characteristics of Nitrogen Doped TiO2 Thin Film Deposited by Magnetron Sputtering [Volume 17, Issue 2, 2010]
• Ahmadi, Vahid Tb/s All-Optical Nonlinear Switching Using SOA Based Mach-Zehnder Interferometer [Volume 21, Issue 3, 2014, Pages 843-852]
• Ahmadi, Vahid A biosensor based on plasmonic wave excitation with diffractive grating structure [Volume 24, Issue 6, 2017, Pages 3441-3447]
• Ahmadi, Vahid Controlling DNA translocation speed through graphene nanopore via plasmonic fields [Volume 25, Issue 3, 2018, Pages 1849-1856]
• Ahmadian, Alireza A Systematic Review on Medical Image Segmentation using Deep Learning [(Articles in Press)]
• Ahmadian, Hamid An investigation into the accelerometer mounting effects on signal transmissibility in modal measurements [Volume 24, Issue 5, 2017, Pages 2436-2444]
• Ahmadian, M. An Adaptive Secure Channel Coding Scheme for Data Transmission over LEO Satellite Channels [Volume 13, Issue 4, 2006]
• Ahmadian, Mohammad Taghi Modeling Paramecium swimming in a capillary tube [Volume 23, Issue 2, 2016, Pages 658-667]
• Ahmadian, Mohammad Taghi Free vibration analysis of functionally graded stiffened micro-cylinder based on the modified couple stress theory [Volume 25, Issue 5, 2018, Pages 2598-2615]
• Ahmadian, Mohammad Taghi Analysis of nonlinear acoustic wave propagation in HIFU treatment using Westervelt equation [Volume 25, Issue 4, 2018, Pages 2087-2097]
• Ahmadian, M. T. Contact Time Study of Electrostatically Actuated Microsystems [Volume 17, Issue 5, 2010]
• Ahmadian, M. T. Vibration and buckling analysis of functionally gradedbeams using reproducing kernel particle method [Volume 21, Issue 6, 2014, Pages 1896-1906]
• Ahmadian, M. T. Development of empirical equations for prediction of modulus of elasticity for monodisperse metallic foams [Volume 21, Issue 6, 2014, Pages 1955-1961]
• Ahmadian, M. T. A novel procedure for micromechanical characterization of white matter constituents at various strain rates [Volume 27, Issue 2, 2020, Pages 784-794]
• Ahmadian, M. T. Nonlinear oscillations of viscoelastic microcantilever beam based on modified strain gradient theory [Volume 28, Issue 2, 2021, Pages 785-794]
• Ahmadian, M. T. Anisotropic finite element modelling of traumatic brain injury: A voxel-based approach [Volume 28, Issue 3, 2021, Pages 1271-1283]
• Ahmadian, M. T. Effect of Sudden Pressure on Spinal Cord and Break Down (Dura Mater, Arachnoid Mater and Pia Mater) an Experimental Analysis on Threshold Levels [(Articles in Press)]
• Ahmadian, M.T. Sustainable health promotion and resilience in urban environment [Volume 23, Issue 5, 2016, Pages 2094-2096]
• Ahmadian, M.T. Free Vibration Analysis of Gantry Type Coordinate Measuring Machines [Volume 13, Issue 2, 2006]
• Ahmadian, M.T. Forced Vibration Analysis of Laminated Rectangular Plates Using Super Elements [Volume 10, Issue 2, 2003]
• Ahmadian, M.T. Tire Modeling with Nonlinear Behavior for Vehicle Dynamic Studies [Volume 8, Issue 2, 2001]
• Ahmadian, M.T. Dynamic Error Analysis of Gantry Type Coordinate Measuring Machines [Volume 14, Issue 3, 2007]
• Ahmadian, M.T. A New Approach in Modeling of Metal-Mold Interface in Casting Using Finite Element Method [Volume 6, Issue 2, 1999]
• Ahmadian, M.T. Electroestatic Charge in Insulating Dust Grains in a Plasma [Volume 4, Issue 4, 1998]
• Ahmadian, M.T. Free Vibration Analysis of Rotating Laminated Cylindrical Shells Under Dierent Boundary Conditions Using a Combination of the Layerwise Theory and Wave Propagation Approach [Volume 16, Issue 2, 2009]
• Ahmadian, M.T. Mechanical analysis of a functionally graded cylinder-piston under internal pressure due to a combustion engine using a cylindrical super element and considering thermal loading [Volume 22, Issue 2, 2015, Pages 493-503]
• Ahmadian, M.T. Fine-tuned double-deck Stewart platform using base excitation with a 6DOF piezo driven hexapod [Volume 22, Issue 3, 2015, Pages 865-870]
• Ahmadian, M.T. Application of Variational Iteration Method to large vibration analysis of slenderness beams considering mid-plane stretching [Volume 22, Issue 5, 2015, Pages 1911-1917]
• Ahmadian, M.T. Effect of size dependency on in-plane vibration of circular micro-rings [Volume 24, Issue 4, 2017, Pages 1996-2008]
• Ahmadian, M.T. Pull-in criteria of a nonclassical microbeam under electric field using homotopy method [Volume 25, Issue 1, 2018, Pages 175-185]
• Ahmadian, M.T. Application of Hyperelastic Models in Mechanical Properties prediction of Mouse Oocyte and Embryo Cells at Large Deformations [Volume 25, Issue 2, 2018, Pages 700-710]
• Ahmadian, M.T. Vibration analysis of FGM rings using a newly designed cylindrical superelement [Volume 25, Issue 3, 2018, Pages 1179-1188]
• Ahmadian, M.T. Vibrational characteristics of size-dependent vibrating ring gyroscope [Volume 25, Issue 6: Special Issue Dedicated to Professor Goodarz Ahmadi, 2018, Pages 3151-3160]
• Ahmadian, M.T. Optimum recovery time for cyclic compression tests on bovine brain tissue [Volume 26, Issue 4: Special Issue Dedicated to Professor Abolhassan Vafai, 2019, Pages 2203-2211]
• Ahmadian, M.T. Investigation into the interaction between quartz nanostructures and human cell lines for tissue engineering [Volume 27, Issue 5, 2020, Pages 2343-2352]
• Ahmadi Boyaghchi, F. Exergetic, exergoeconomic, and exergoenvironmental assessments and optimization of a novel solar cascade organic Rankine cycle-assisted hydrogen liquefaction [Volume 28, Issue 1, 2021, Pages 273-290]
• Ahmadi Dastgerdi, K. Model reference adaptive control of a small satellite in the presence of parameter uncertainties [Volume 27, Issue 6, 2020, Pages 2933-2944]
• Ahmadi Nejad joushani, H. Numerical simulation of a neuron under blast load using viscoelastic material models [Volume 28, Issue 1, 2021, Pages 255-264]
• Ahmadinezhad, A. Effects of initial suction and degree of saturation on dynamic properties of sand at large strain [Volume 28, Issue 1, 2021, Pages 156-174]
• Ahmadi-Pajouh, Mohammad Ali A novel stretching and folding characterization method based on geometrical and physiological traits of chaotic and intermittent tracking signals [(Articles in Press)]
• Ahmadizar, F. A novel bi-objective model for a job shop scheduling problem with consideration of Fuzzy parameters, modified learning effects and multiple preventive maintenance activities [Volume 29, Issue 6, 2022, Pages 3418-3433]
• Ahmadpour, T. A computational plastic–damage method for modeling the FRP strengthening of concrete arches [Volume 26, Issue 4: Special Issue Dedicated to Professor Abolhassan Vafai, 2019, Pages 2123-2132]
• Ahmadvand, Masoud The Influence of Seepage and Gravitational Loads on Elastoplastic Solution of Circular Tunnels [Volume 21, Issue 6, 2014, Pages 1821-1832]
• Ahmadyfard, A. Vehicle speed and dimensions estimation using on-road cameras by identifying popular vehicles [Volume 29, Issue 5, 2022, Pages 2515-2525]
• Ahmadyfard, Alireza Extracting Common Spatial Patterns from EEG time segments for classifying Motor Imagery classes in a Brain Computer Interface (BCI) [Volume 20, Issue 6, 2013, Pages 2061-2072]
• Ahmadzadehtalatapeh, M. Feasibility study of a water-to-air heat pipe based heat exchanger for cooling load reduction and energy saving in the office buildings: A simulation study [Volume 24, Issue 3, 2017, Pages 1040-1050]
• Ahmadzadehtalatapeh, M. Solar assisted desiccant evaporative cooling system for office buildings in Iran: a yearly simulation model [Volume 25, Issue 1, 2018, Pages 280-298]
• Ahmadzadehtalatapeh, M. Effect of turbulent and laminar flow mechanisms on air flow patterns and CO2 distribution in an operating room: A numerical analysis abbreviated title: Air flow pattern in an operating room [Volume 30, Issue 3, 2023, Pages 1008-1026]
• Ahmari, M. Numerical study of conjugate heat transfer in laminar and turbulent nano fluid flow in double pipe heat  exchangers [Volume 23, Issue 5, 2016, Pages 2211-2219]
• Ahmed, Ary Optimization-based scheduling of construction projects with generalized precedence relationships: A real-life case study [Volume 31, Issue 19, 2024, Pages 1809-1824]
• Ahmed, Bilal Numerical Investigation of Non-linear Radiation Effects in Boundary Layer Oblique Stagnation Point Flow of non-Newtonian Fluids over a Symmetrically Stretching Surface under the Effects of Magnetic Field [(Articles in Press)]
• Ahmed, I. Synthesis, characterization and biological screening of different carbamates derived from 7-hydroxy-4-methyl-2H-1-benzopyran-2-one [Volume 22, Issue 6, 2015, Pages 2241-2248]
• Ahmed, Imtiaz Computation insight of modified thermal distribution of hybrid nanofluids in complex wavy channel: A comparative thermal approach for different nanofluid models [(Articles in Press)]
• Ahmed, N. Analysis of tool wear in ultrasonically assisted turning of  -Ti-15V-3Al-3Cr-3Sn alloy [Volume 23, Issue 4, 2016, Pages 1800-1810]
• Ahmed, N. Influence of tool material on forces, temperature, and surface quality of Ti-15333 alloy in CT and UAT [Volume 26, Issue 5, 2019, Pages 2805-2816]
• Ahmed, Naseer Dynamic Behaviour of β-Ti-15333 in Ultrasonically Assisted Turning: Experimental and Numerical Analysis [Volume 24, Issue 6, 2017, Pages 2904-2914]
• Ahmed, S. Mycogenesis of silver nanoparticles by different Aspergillus species [Volume 21, Issue 3, 2014, Pages 1143-1150]
• Ahmed, S. Improved Ratio Estimators of Variance Based on Robust Measures [Volume 26, Issue 4, 2019, Pages 2484-2494]
• Ahmed, S. On the use of ranked set sampling for estimating super-population total: Gamma population model [Volume 28, Issue 1, 2021, Pages 465-476]
• Ahmed, S. TDE based model-free control for rigid robotic manipulators under nonlinear friction [Volume 31, Issue 2, 2024, Pages 137-148]
• Ahmed, Sahin Physical Insights on Bio-Convection in Prandtl Nanofluid over an Inclined Stretching Sheet in Non-Darcy Medium: Numerical Simulation [(Articles in Press)]
• Ahmed, Sameh E. Heat Generation Effects on MHD Double Diffusive of Tio 2 -Cu/Water Hybrid Nanofluids in a Lid-Driven Wavy Porous Cavity Using LTNE Condition [(Articles in Press)]
• Ahmed, Sh. A novel basis function approach to finite population parameter estimation [Volume 30, Issue 3, 2023, Pages 1224-1244]
• Ahmet, KOLİP ENSET FIBER REINFORCED COMPOSITE VEHICLE BODY CRASH ANALYSIS USING ANSYS [(Articles in Press)]
• Ahn, N. Evaluation of shear behavior of deep beams with shear reinforced with GFRP plate [Volume 22, Issue 6, 2015, Pages 2142-2149]
• A. Hosseinpour, Hossein Numerical Solution of Homogeneous Double Pipe Heat Exchanger: Dynamic Modeling [Volume 21, Issue 2, 2014, Pages 449-455]
• Ahrabi Tabriz, M. Visual creativity through concept combination using quantum cognitive models [Volume 31, Issue 2, 2024, Pages 118-135]
• Ahsan, Muhammad Analysis Natural Convection of Hybrid Nanofluid in a Tilted Cavity under Inclined Magnetic Field [(Articles in Press)]
• Ahzi, S. Analytical solution to governing equations of triple coupled physics of structural mechanics, diffusion, and heat transfer [Volume 25, Issue 5, 2018, Pages 2738-2757]
• Aich, Walid Thermal applications of hybrid nanofluid containing carbon nanotubes with heat source and radiative effects [(Articles in Press)]
• Aidun, Cyrus K Analysis of the secondary vortices in rotating Flow induced by a twisted tape inside a pipe [Volume 25, Issue 6: Special Issue Dedicated to Professor Goodarz Ahmadi, 2018, Pages 3161-3172]
• Ajabshirchi, Y. Comprehensive evaluation of a semi-solar greenhouse:Energy, exergy, and economic analyses with experimental validation [Volume 28, Issue 5, 2021, Pages 2613-2627]
• Ajabshirizadeh, A. Radiative Transfer in the Fine Structures of Quiescent Prominences [Volume 16, Issue 3, 2009]
• Ajalli, F. Aerodynamic Investigation of a Damaged Airfoil with Wall Eects [Volume 17, Issue 5, 2010]
• Ajdari, M. Shear Strength Behavior and Soil Water Retention Curve of a Dual Porosity Silt-Bentonite Mixture [Volume 17, Issue 6, 2010]
• Ajdari, M.‎ Oedometric Response of an Artificially Prepared Sand-Bentonite Mixture Improved by Potassium Silicate [Volume 22, Issue 2, 2015, Pages 367-372]
• Ajide, Tomisin Favour Analysis of Natural Convective Flow of Casson Fluid around an Inclined Rectangular Cylinder [(Articles in Press)]
• Ak, T. Application of Petrov-Galerkin finite element method to shallow water waves model: Modified Korteweg-de Vries equation [Volume 24, Issue 3, 2017, Pages 1148-1159]
• Ak, Turgut Computational analysis of shallow water waves with Korteweg-de Vries equation [Volume 25, Issue 5, 2018, Pages 2582-2597]
• AKBABA, Mehmet Optimum Pole Arc Offset in Permanent Magnet Synchronous Generators for Obtaining Least Voltage Harmonics [Volume 24, Issue 6, 2017, Pages 3223-3230]
• Akbarbeiglou, F. Effect of temperature and time on the structural properties of PbS nanofilms [Volume 26, Issue 3, 2019, Pages 2007-2012]
• Akbar Hussain, E. Microwave-assisted green synthesis of guar gum esters with enhanced physicochemical properties [Volume 26, Issue 3, 2019, Pages 1474-1484]
• Akbari, AliAkbar Improving Lateral Dynamics of Vehicle Using Direct Yaw Moment Controller Based on Quantitative Feedback Theory [Volume 24, Issue 2, 2017, Pages 662-672]
• Akbari, D. Investigation of the eects of the weld groove shape on the residual stress formation in the butt-welded plates [Volume 23, Issue 5, 2016, Pages 2230-2237]
• Akbari, E. Evaluation of the impact of environmental conditions on diabetes using ensemble classifier based on genetic algorithm [Volume 29, Issue 5, 2022, Pages 2394-2404]
• Akbari, J. Numerical study of material properties, residual stress and crack development in sintered silver nano-layers on silicon substrate [Volume 23, Issue 3, 2016, Pages 1037-1047]
• Akbari, Javad Conditioning of vitrified and resin bond CBN grinding wheels using a picosecond laser [Volume 24, Issue 5, 2017, Pages 2369-2378]
• Akbari, M. A procedure for setting up a 180-degree sharp bend flume including construction and examinations with hydraulic structures [Volume 26, Issue 6, 2019, Pages 3165-3180]
• Akbari, M. Piezoelectric wind energy harvesting from vortex- induced vibrations of an elastic beam [Volume 30, Issue 1, 2023, Pages 77-89]
• Akbari, Maryam A Comparison among Data Mining Algorithms for Outlier Detection using Flow Pattern Experiments [Volume 25, Issue 2, 2018, Pages 590-605]
• Akbari, Maryam Evaluation of effective parameters on lateral buckling of subsea pipelines on a rigid seabed [Volume 25, Issue 4, 2018, Pages 1891-1906]
• Akbari, Reza Development of a Method Based on Particle Swarm Optimization to Solve Resource Constrained Project Scheduling Problem [Volume 20, Issue 6, 2013, Pages 2123-2137]
• Akbari Alashti, R. The Effect of Ductile Damage on Plastic Behavior of a Rotating Disk with Variable Thickness Subjected to Mechanical Loading [Volume 23, Issue 1, 2016, Pages 174-193]
• Akbari Alashti, Reza The effect of radial force on pull-in instability and frequency of rigid core circular and annular plates subjected to electrostatic field [Volume 25, Issue 4, 2018, Pages 2111-2129]
• Akbarian Tefaghi, Elham The effect of Carbon Nanotubes/Bioglass nanocomposite on Mechanical and Bioactivity properties of Glass Ionomer Cement [Volume 23, Issue 6, 2016, Pages 3123-3134]
• Akbari Foroud, A. Providing transient stability by excitation system response improvement methods through long-term contracts [Volume 26, Issue 3, 2019, Pages 1652-1663]
• Akbari Foroud, A. Flicker source detection including fixed speed wind turbines using empirical mode decomposition [Volume 30, Issue 5, 2023, Pages 1743-1763]
• Akbari Foroud, Asghar A New Solution Approach for Supply Function Equilibrium-based Bidding Strategy in Electricity Markets [Volume 24, Issue 6, 2017, Pages 3231-3246]
• Akbari Foroud, Asghar Portfolio Optimization in Electricity Market Using a Novel Risk Based Decision Making Approach [Volume 25, Issue 6, 2018, Pages 3569-3583]
• Akbari Hamed, Arash Parametric study and computation of seismic performance factors of braced shear panels [Volume 23, Issue 2, 2016, Pages 460-474]
• Akbari-Hasanjani, Reza QQCAsim: a new simulation tool for quaternary logic in QCA technology [(Articles in Press)]
• Akbari Jokar, M.R. Cost Evaluation of a Two-Echelon Inventory System with Lost Sales and Approximately Normal Demand [Volume 13, Issue 1, 2006]
• Akbari Jokar, M.R. Optimizing a Joint Economic Lot Sizing Problem with Price-Sensitive Demand [Volume 16, Issue 2, 2009]
• Akbari Paydar, Nima Influence of Fines Content and Type on the Small-2 strain Shear Modulus of Sand [Volume 21, Issue 4, 2014, Pages 1281-1296]
• Akbari Resketi, H. R. Fault-tolerant capability analysis of six-phase induction motor with distributed, concentrated, and pseudo-concentrated windings [Volume 31, Issue 10, 2024, Pages 775-789]
• Akbarpour, M.H. Analytical Mode Distributions and Resonant Frequencies in Ladder Networks Used in Power Combining Oscillator Arrays [Volume 15, Issue 2, 2008]
• Akbarpour, N. A new bi-objective integrated vehicle transportation model considering simultaneous pick-up and split delivery [Volume 28, Issue 6, 2021, Pages 3569-3588]
• Akbarpour, Sasan Numerical Investigation on the External Compressible Flow around NACA m1 and NACA 0015 Airfoils [Volume 20, Issue 5, 2013, Pages 1508-1516]
• Akbarpour Shirazi, M. A bi-objective multi-echelon supply chain model with Pareto optimal points evaluation for perishable products under uncertainty [Volume 26, Issue 5, 2019, Pages 2952-2970]
• Akbarpour Shirazi, M. Multi-echelon green open-location-routing problem: A robust-based stochastic optimization approach [Volume 28, Issue 2, 2021, Pages 985-1000]
• Akbarpour Shirazi, M. A quantitative measure of financial resilience of firms: Evidence from Tehran stock exchange [Volume 30, Issue 1, 2023, Pages 302-317]
• Akbarpour Shirazi, Mohsen A multi-objective SCOR-based decision alignment for supply chain performance management [Volume 25, Issue 5, 2018, Pages 2807-2823]
• Akbarpour Shirazi, Mohsen A possibilistic programming approach for biomass supply chain network design under hesitant fuzzy membership function estimation [Volume 31, Issue 18, 2024, Pages 1606-1624]
• Akbarpour Shirazi, Mohsen A novel hierarchical dynamic group decision-based fuzzy ranking approach to evaluate the green road construction suppliers [(Articles in Press)]
• Akbarpour Shirazi, Mohsen Quantitative Analysis of Stock Market Resilience during Oil Price Shocks: Evidence from seven Middle East Countries [(Articles in Press)]
• Akbarzadeh, Mehdi Nonlinear free and forced vibrations of curved single walled carbon nanotube on a Pasternak elastic foundation [Volume 23, Issue 6, 2016, Pages 3087-3098]
• Akbarzadeh Bengar, H. Strengthening and shape modification of fire-damaged concrete with expansive cement concrete and CFRP wrap [Volume 26, Issue 2, 2019, Pages 699-708]
• Akbarzadeh Bengar, Habib Effect of Steel and Concrete Coupling Beam on Seismic Behavior of RC Frame Accompanied with Coupled Shear Walls [Volume 24, Issue 5, 2017, Pages 2227-2241]
• Akbarzadeh Bengar, Habib Effect of steel fiber on fracture characteristics and ductility of self-compacting concrete: experimental and theoretical investigation [(Articles in Press)]
• Akbarzadeh Pasha, Mohammad The Effect of Catalyst Combination Ratioon Growth of Carbon Nanotubesover Fe-Co/nanometric SiCby Chemical Vapor Deposition [Volume 23, Issue 3, 2016, Pages 1517-1523]
• Akbarzadeh-Tootoonchi, M.R. Semi-Active Control of Structures Using a Neuro-Inverse Model of MR Dampers [Volume 16, Issue 3, 2009]
• Akbilek, Nevra Zoning Constrained Machine Layout Problem with Mutual Clearances [(Articles in Press)]
• Akcetin, E. Three-valued soft set and its multi-criteria group decision making via TOPSIS and ELECTRE [Volume 28, Issue 6, 2021, Pages 3719-3742]
• Akella, A.K. Design and analysis of solar photovoltaic-fed Z-source inverter-based dynamic voltage restorer [Volume 27, Issue 6, 2020, Pages 3190-3203]
• Akella, Ashok Kumar A novel robust model reference adaptive MPPT controller for Photovoltaic systems [(Articles in Press)]
• Akgöz, Bekir Frequency response of skew and trapezoidal shaped mono-layer graphene sheets via discrete singular convolution [Volume 21, Issue 3, 2014, Pages 1197-1207]
• Akgoz, B. Free Vibration Analysis of Microtubules as Cytoskeleton Components: Nonlocal Euler-Bernoulli Beam Modeling [Volume 17, Issue 5, 2010]
• Akgul, A. Numerical appraisal of the unsteady Casson fluid flow through Finite Element Method (FEM) [Volume 30, Issue 2, 2023, Pages 454-463]
• Akgul, Akif A New Chaotic Jerk System with Cubic and Hyperbolic Sine Nonlinearities and Its Application to Random Number Generation and Biomedical Image Encryption [(Articles in Press)]
• Akhai, Shalom Investigating the Microstructure and Mechanical Performance of Ceria and Graphene-Reinforced Aluminum Hybrid Composites [(Articles in Press)]
• Akhavan, Ali A new control method for grid-connected quasi-Z-source multilevel inverter based photovoltaic system [Volume 22, Issue 6, 2015, Pages 2505-2515]
• Akhavan Behabadi, M.A. Light Oil – Gas Two-Phase Flow Pattern Identification in Different Pipe Orientations: An Experimental Approach [Volume 24, Issue 5, 2017, Pages 2445-2456]
• Akhavan Chayjan, K. The analysis of bullwhip effect in supply chain based on hedging strategy compared with optimal order quantity strategy [Volume 30, Issue 3, 2023, Pages 1180-1203]
• Akhavan Chayjan, Kosar Assessment of hedging strategy on supply chain performance with a single supplier and two retailers [(Articles in Press)]
• Akhavan Kazemi, K. Some Mechanical Properties of Normal and Recycled Aggregate Concretes [Volume 22, Issue 6, 2015, Pages 1972-1980]
• Akhavan Niaki, S.T. Designing a Communication Network Using Simulation [Volume 11, Issue 3, 2004]
• Akhavan Niaki, S.T. Optimizing Multi-Response Statistical Problems Using a Genetic Algorithm [Volume 13, Issue 1, 2006]
• Akhavan Niaki, S.T. Designing an Infinite Channel Server [Volume 13, Issue 1, 2006]
• Akhavan Niaki, S.T. A Transformation Technique in Designing Multi-Attributes C Control Charts [Volume 15, Issue 1, 2008]
• Akhavan Niaki, S.T. Designing an Optimum Acceptance Sampling Plan Using Bayesian Inferences and Stochastic Dynamic Programming Approach [Volume 16, Issue 1, 2009]
• Akhavan Niaki, S.T. Economic Production Quantity Model with Scrapped Items and Limited Production Capacity [Volume 17, Issue 1, 2010]
• Akhavan Salmassi, Mehran Evaluation of Reinforced Concrete Tall Buildings with End Shear Walls Subjected to Sequences Far from the Fault [(Articles in Press)]
• Akhavan-Tabatabaei, R. Estimating the parameters of mixed shifted negative binomial distributions via an EM algorithm [Volume 26, Issue 1, 2019, Pages 571-588]
• Akhavat, M. An effective approach to structural damage localization in flexural members based on generalized S-transform [Volume 26, Issue 6, 2019, Pages 3125-3139]
• Akhavein, A. Improvement of regional market management considering reserve, information-gap decision theory, and emergency demand response program [Volume 30, Issue 1, 2023, Pages 125-141]
• Akhaveissy, A. H. Implementation and Comparison of a Generalized Plasticity and Disturbed State Concept for the Load-Deformation Behavior of Foundations [Volume 16, Issue 3, 2009]
• Akhaveissy, A. H. Numerical modeling of masonry wall under underground waves [Volume 28, Issue 6, 2021, Pages 2987-3007]
• Akhbari, A. Performance and stability analysis of single-phase grid-connected inverters used in solar photovoltaic systems [Volume 26, Issue 3, 2019, Pages 1637-1651]
• Akhbari, M. Partnership of contractors in cooperative game theory approach to project resource management [Volume 27, Issue 1, 2020, Pages 469-480]
• Akhbari, M. Integration of multi-mode resource-constrained project scheduling under bonus-penalty policies with material ordering under quantity discount scheme for minimizing project cost [Volume 29, Issue 1, 2022, Pages 427-446]
• Akhgari, B. Biogas Reverse Supply Chain Network Design based on Biomass Quality Levels using Robust Programming and Benders decomposition approach [(Articles in Press)]
• Akhlaghi, H. Investigation of time-frequency analysis and transitional boundary layer over a pitching airfoil [Volume 28, Issue 2, 2021, Pages 860-876]
• Akhlaghi, M. A New Eco-Friendly and Ecient Mesoporous Solid Acid Catalyst for the Alkylation of Phenols and Naphthols Under Microwave Irradiation and Solvent-Free Conditions [Volume 16, Issue 2, 2009]
• Akhlaghi, M. M. Investigation into opportunities and challenges of cross-border electricity trade in Iran [Volume 30, Issue 3, 2023, Pages 1159-1168]
• Akhlaghian, F. CuO/WO3/TiO2 photocatalyst for degradation of phenol wastewater [Volume 25, Issue 6, 2018, Pages 3345-3353]
• Akhlaghian, Faranak Comparison of Sol-Gel Methods for Washcoating Metallic Substrates [Volume 17, Issue 2, 2010]
• Akhoundi, M. Performance evaluation of a kalina cycle using a novel extended thermodynamic analysis [Volume 30, Issue 3, 2023, Pages 953-968]
• Akhtar, N. An efficient mixed-memory-type control chart for normal and non-normal processes [Volume 28, Issue 3, 2021, Pages 1736-1749]
• Akhtar, S. Mathematical modeling of Williamson's model for blood flow inside permeable multiple stenosed arteries with electro-osmosis [Volume 30, Issue 5, 2023, Pages 1572-1586]
• Akhtari, A.A. A combination of computational fluid dynamics, artificial neural network, and support vectors machines models to predict flow variables in curved channel [Volume 26, Issue 2, 2019, Pages 726-741]
• Akhtari Shishavan, H. Lattice Boltzmann simulation of blood flow properties and vessel geometry in open and closed vessels: A numerical study [Volume 26, Issue 6, 2019, Pages 3283-3292]
• Akhtarpour, A. The deformation mechanism of a high rockfill dam during the construction and first impounding [Volume 27, Issue 2, 2020, Pages 566-587]
• Akhtarpour, Ali Long-term Deformation Mechanism of Masjed-e-Soleyman High Rockfill Dam [(Articles in Press)]
• Akhter, R. Magneto-hydrodynamic mixed convective heat transfer in a nanofluid filled wavy conduit having rotating cylinders [Volume 29, Issue 2, 2022, Pages 486-501]
• Akhter, S. Impact of viscous dissipation on MHD darcy-forchheimer nanoliquid flow comprising gyrotactic microorganisms past a nonlinear extending surface [Volume 30, Issue 6, 2023, Pages 2235-2244]
• Akhter, Sh. Study of thermally developed flow of viscous fluid over a porous stretching surface contacting gyrotatic microorganisms using buongiorno model [Volume 28, Issue 3, 2021, Pages 1926-1938]
• Akin, J. E. A new Fourier series solution for free vibration of non-uniform beams, resting on variable elastic foundation [Volume 25, Issue 6, 2018, Pages 2967-2979]
• Akkaya, U. Application of trend analysis and artificial neural networks methods: The case of Sakarya River [Volume 24, Issue 3, 2017, Pages 993-999]
• Akkaya Oy, S. Design and optimization of tubular linear permanent-magnet generator with performance improvement using response surface methodology and multi-objective genetic algorithm [Volume 27, Issue 6, 2020, Pages 3053-3065]
• Akkaya Oy, S. A design of mass-spring type piezoelectric energy harvesting [Volume 28, Issue 6, 2021, Pages 3504-3511]
• Akkurt, Fatih Exergoeconomic Analysis of a Solar-Geothermal Hybrid Organic Rankine System [(Articles in Press)]
• Akkus, H. Experimental and statistical investigations of surface roughness, vibration, and energy consumption values of titanium alloy during machining using response surface method and grey relational analysis [Volume 29, Issue 1, 2022, Pages 109-119]
• Akram, K. B. Computational exploration of charge transfer dynamics in dye sensitized SnO2 and ZnS for photocatalytic applications [Volume 29, Issue 3, 2022, Pages 1330-1337]
• Akram, M. Novel decision-making framework based on complex q-rung orthopair fuzzy information [Volume 30, Issue 4, 2023, Pages 1450-1479]
• Akram, Muhammad 2-Tuple Linguistic q-Rung Orthopair Fuzzy Power MSM Approach for Choosing Sustainable Waste Disposal Technology [(Articles in Press)]
• Akram, S. Nanofluid effects on peristaltic transport of a fourth grade fluid in the occurrence of inclined magnetic field [Volume 23, Issue 3, 2016, Pages 1502-1516]
• Akrami Khaledi, K. A one-DOF passive glove for thumb rehabilitation [Volume 29, Issue 4, 2022, Pages 1806-1816]
• Akraminia, M. Classification of Mean Arterial Pressure Regimes in ICU Using a Model-Based Support Vector Machine: Acute Hypotensive, Critical and Survival Episodes [Volume 17, Issue 4, 2010]
• Alabi, O. O. Experimental and numerical investigation of flow behaviors of some selected food supplements in modeled intestine [Volume 30, Issue 1, 2023, Pages 39-51]
• Alabyev, V.R. Economic efficiency of the application of artificial air cooling for normalization of thermal conditions in oil mines [Volume 27, Issue 3, 2020, Pages 1606-1615]
• Alaei, M. Preference of Nano porous graphene to Single-Walled Carbon Nanotube (SWCNT) for preparing Silica Nano hybrid Pickering Emulsion for potential Chemical Enhanced Oil Recovery (C-EOR) [Volume 24, Issue 6, 2017, Pages 3491-3499]
• Alaei, Reza Selecting unique suppliers through winner determination in combinatorial reverse auction: scatter search algorithm [Volume 24, Issue 6, 2017, Pages 3297-3307]
• Alaei, S. Cooperative advertising with two local advertising options in a retailer duopoly [Volume 29, Issue 1, 2022, Pages 412-426]
• Alaei, Saeed A Hybrid Cultural-Harmony Algorithm for Multi-Objective Supply Chain Coordination [Volume 22, Issue 3, 2015, Pages 1227-1241]
• Alaei, Saeed Supply chain coordination via two-way cooperative advertising contract considering competing retailers [Volume 23, Issue 5, 2016, Pages 2330-2340]
• Alafzadeh, M. Effects of stenosis and RBC motion on mass transfer in the microvessels using immersed boundary-lattice Boltzmann method [Volume 25, Issue 5, 2018, Pages 2561-2569]
• Alaghband, Marie An optimization model for scheduling freight trains on a single-rail track [Volume 29, Issue 2, 2022, Pages 853-863]
• Alagumurthi, N. Review of Advanced Combustion Technology using Low Temperature Combustion in Automobile industries [(Articles in Press)]
• Alam, K. Influence of tool material on forces, temperature, and surface quality of Ti-15333 alloy in CT and UAT [Volume 26, Issue 5, 2019, Pages 2805-2816]
• Alam, Khurshid Experimental measurements of temperatures in drilling cortical bone using thermocouples [Volume 22, Issue 2, 2015, Pages 487-492]
• Alam, M. An Improved FDIA Approach for PMU-Assisted Linear Power System State Estimation [(Articles in Press)]
• Alam, P. Dispersion of Stoneley waves through the irregular common interface of two hydrostatic stressed MTI media [Volume 28, Issue 2, 2021, Pages 837-846]
• Alam, S. Solution of an Economic Production Quantity model using the generalized Hukuhara derivative approach [(Articles in Press)]
• Alamdari, A. Determining Maximum Load Carrying Capacity of Flexible Link Manipulators [Volume 16, Issue 5, 2009]
• Alam Khan, L. An integrated approach of quality for polymer composite manufacturing validated and optimized through Taguchi method [Volume 24, Issue 4, 2017, Pages 1985-1995]
• Alam ‎, K. Direction-dependent analysis of force and torque in conventional and ultrasonically-assisted drilling of cortical bone [Volume 22, Issue 1, 2015, Pages 258-263]
• Alam Tabriz, Akbar The NDEA–MOP Model in the Presence of Negative Data Using Fuzzy Method [Volume 25, Issue 1, 2018, Pages 398-409]
• Alam Tabriz, Akbar Hybrid cluster and data envelopment analysis with interval data [Volume 25, Issue 5, 2018, Pages 2904-2911]
• Alam-Tabriz, A. A mathematical model to optimize the reliability of the satellite attitude determination and control system [Volume 29, Issue 6, 2022, Pages 3505-3522]
• Alarjani, A. Tensile creep monitoring of basalt fiber-reinforced polymer plates via electrical potential change and artificial neural network [Volume 27, Issue 4, 2020, Pages 1995-2008]
• Alasty, A. An adaptive impedance control algorithm; Application in exoskeleton robot [Volume 22, Issue 2, 2015, Pages 519-529]
• Alasty, A. Optimal tuner selection using Kalman filter for a real-time modular gas turbine model [Volume 27, Issue 2, 2020, Pages 806-818]
• Alasty, Aria Multivariable control of an industrial boiler-turbine unit with nonlinear model: A comparison between gain scheduling & feedback linearization approaches [Volume 20, Issue 5, 2013, Pages 1485-1498]
• Alasty, Aria Kinematic Control of a New Hyper-Redundant Manipulator with Lockable Joints [Volume 20, Issue 6, 2013, Pages 1742-1752]
• Alasty, Aria Stabilization of a Vibrating Non-Classical Micro-Cantilever Using Electrostatic Actuation [Volume 20, Issue 6, 2013, Pages 1824-1831]
• Alasty, Aria Optimal Sliding Mode Control for Atomic Force Microscope Tip Positioning during Nano-Manipulation Process [Volume 20, Issue 6, 2013, Pages 2285-2296]
• Alasty, Aria Controllability of linear fractional stochastic systems [Volume 22, Issue 1, 2015, Pages 264-271]
• Alasty, Aria Vibration boundary control of Timoshenko micro-cantilever using piezoelectric actuators [Volume 25, Issue 2, 2018, Pages 711-720]
• Alasty, Aria Comparison of Nonlinear Filtering Techniques for Inertial Sensors Error Identification in INS/GPS Integration [Volume 25, Issue 3, 2018, Pages 1281-1295]
• Alavi, S. M. Stance detection on social media, case study: Persian sentences using deep learning architecture [Volume 31, Issue 10, 2024, Pages 764-773]
• Alavi, S. M. H. Educational Robot for Principles of Electrical Engineering [Volume 25, Issue 3, 2018, Pages 1582-1592]
• Alavi-Shoushtari, S. Solid State Kinetic Parameters.... [Volume 4, Issue 1, 1997, Pages 46-52]
• Albadvi, A. Application of PROMETHEE" for Market Targeting: A Case Study on the TV Market in Iran [Volume 14, Issue 3, 2007]
• Albadvi, A. Service Quality Prioritization in various environments (A Cross-cultural comparison) [Volume 16, Issue 1, 2009]
• ALCAN, Haluk Gorkem Fire Performance of Steel Profiles Covered with Self Compacting Concrete [(Articles in Press)]
• Al-den, D. J. Fakar Investigation of structural, photo-luminescence and self-cleaning properties of thin layers of GO-ZnO and GO, GO-Ag and composite bilayer of GO-ZnO/GO-Ag prepared by spray pyrolysis method [Volume 31, Issue 12, 2024, Pages 958-966]
• Aldlemy, M.S. Dynamic adaptive mesh refinement of Fluid-structure interaction using immersed boundary method with two-stage corrections [Volume 26, Issue 5, 2019, Pages 2827-2838]
• Alduwaib, S. M. The structural, optical, and self-cleaning properties of Mn3O4/SnO2 multilayer thin films deposited using spray pyrolysis technique [Volume 28, Issue 6, 2021, Pages 3776-3785]
• Alduwaib, S. M. Investigation of structural, photo-luminescence and self-cleaning properties of thin layers of GO-ZnO and GO, GO-Ag and composite bilayer of GO-ZnO/GO-Ag prepared by spray pyrolysis method [Volume 31, Issue 12, 2024, Pages 958-966]
• Aldwaik, Mais Neurocomputing in Civil Infrastructure [Volume 23, Issue 6, 2016, Pages 2417-2428]
• Alebraheem, J. Particle rotation effects in Cosserat-Maxwell boundary layer flow with non-Fourier heat transfer using a new novel approach [Volume 28, Issue 3, 2021, Pages 1223-1235]
• Alekya, P. Python programming predictions of thermal behavioral aspects of orange peel and coconut-coir reinforced epoxy composites [Volume 31, Issue 8, 2024, Pages 659-666]
• Alemi, M. Teaching music to children with autism: A social robotics challenge [Volume 26, Special Issue on: Socio-Cognitive Engineering, 2019, Pages 40-58]
• Alemi, Minoo Clinical Interventions of Social Humanoid Robots in the Treatment of a Set of High- and Low-Functioning Autistic Iranian Twins [Volume 25, Issue 3, 2018, Pages 1197-1214]
• Alemi, Payam An Optimal Scenario-Based Scheduling Method for an SOP-included Active Distribution Network Considering Uncertainty of Load and Renewable Generations [(Articles in Press)]
• Alemi-Rostami, M. Fault-tolerant capability analysis of six-phase induction motor with distributed, concentrated, and pseudo-concentrated windings [Volume 31, Issue 10, 2024, Pages 775-789]
• Alemi-Rostami, Mehdi Design and optimization of a large-scale permanent magnet synchronous generator [Volume 29, Issue 1, 2022, Pages 217-229]
• Alemohammad, H. Numerical study of material properties, residual stress and crack development in sintered silver nano-layers on silicon substrate [Volume 23, Issue 3, 2016, Pages 1037-1047]
• Alemrajabi, A. New insight into the performance analysis of flow-electrode capacitive deionization by varying the operation voltage [Volume 28, Issue 3, 2021, Pages 1421-1427]
• Alemtabriz, A. A multi-stage stochastic programming model for sustainable closed-loop supply chain network design with financial decisions: A case study of plastic production and recycling supply chain [Volume 27, Issue 1, 2020, Pages 377-395]
• AlemTabriz, Akbar A hybrid robust optimization and simulation model to establish temporary emergency stations for earthquake relief [(Articles in Press)]
• Alemzadeh, I. Investigation into Some Parameters Affecting Pectin Gel Quality [Volume 12, Issue 1, 2005]
• Alemzadeh, I. Production of Low Ester (LM) Pectin by De-esterification of High Ester (HM) Apple Pectin [Volume 12, Issue 3, 2005]
• Alemzadeh, I. Investigation into Some Parameters Aecting Pectin Gel Quality [Volume 14, Issue 2, 2007]
• Alemzadeh, I. Characteristics of a Biopolymer Flocculant Produced by Bacillus sp.As-1O1 [Volume 8, Issue 3, 2001]
• Alemzadeh, I. Combined Chemical and Biological Processes for the Treatment of Industrial Wastewater Containing Formaldehyde [Volume 8, Issue 3, 2001]
• Alemzadeh, I. Microbial Population Control in Emulsion Oil [Volume 7, Issue 2, 2000]
• Alemzadeh, I. Enzymatic Synthesis of Amoxicillin with Immobilized Penicillin G Acylase [Volume 17, Issue 1, 2010]
• Alemzadeh, I. Comparison and optimization of conjugated linoleic acid production by Lactobacillus plantarum and Lactobacillus plantarum subsp. plantarum [Volume 24, Issue 3, 2017, Pages 1272-1280]
• Ale Saheb Fosoul, S. Comparative study of seismic structural response to real and spectrum matched ground motions [Volume 22, Issue 1, 2015, Pages 92-106]
• Ale Saheb Fosoul, S. A new ground motion record selection procedure based on the effects of spectral share and period elongation [Volume 28, Issue 1, 2021, Pages 109-123]
• Alghamdi, M. Cattaneo-Christov heat and mass flux models on time-dependent swirling flow through oscillatory rotating disk [Volume 28, Issue 3, 2021, Pages 1329-1341]
• Algieri, C. Preparation of Pt-ZSM-5 zeolite membrane catalysts for the isomerization of linear alkane [Volume 27, Issue 3, 2020, Pages 1243-1252]
• Alhadri, Muapper Computation insight of modified thermal distribution of hybrid nanofluids in complex wavy channel: A comparative thermal approach for different nanofluid models [(Articles in Press)]
• Alhadri, Muapper Thermal applications of hybrid nanofluid containing carbon nanotubes with heat source and radiative effects [(Articles in Press)]
• Alharbi, F. M. Effects of heat and mass transfer on stagnation point flow of micropolar Maxwell fluid over Riga plate [Volume 28, Issue 6, 2021, Pages 3753-3766]
• Alhodaly, M. Sh. Consequences of activation energy and chemical reaction in radiative flow of tangent hyperbolic nanoliquid [Volume 26, Issue 6, 2019, Pages 3928-3937]
• Ali, A. Performance evaluation of joint monitoring control charts [Volume 24, Issue 4, 2017, Pages 2152-2163]
• Ali, F. M. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
• Ali, J. A triband EBG loaded microstrip fractal antenna for THz application [Volume 30, Issue 1, 2023, Pages 207-217]
• Ali, K. Impact of viscous dissipation on MHD darcy-forchheimer nanoliquid flow comprising gyrotactic microorganisms past a nonlinear extending surface [Volume 30, Issue 6, 2023, Pages 2235-2244]
• Ali, Kashif Convection driven flow between moving diska- A non-linear approach for modelling thermal radiation [Volume 31, Issue 16, 2024, Pages 1402-1419]
• Ali, K.K. A septic B-spline collocation method for solving nonlinear singular boundary value problems arising in physiological models [Volume 27, Issue 3, 2020, Pages 1674-1874]
• Ali, M. Computational analysis of the slow invariant manifold for single and multi-route reaction mechanisms [Volume 27, Issue 3, 2020, Pages 1293-1299]
• Ali, M. Entropy generation analysis for chemically reactive flow of Sutterby nanofluid considering radiation aspects [Volume 31, Issue 12, 2024, Pages 935-944]
• Ali, Mohammed Hasmat Parallel control structure based sliding mode controller for second order unstable processes with Dead-Time [(Articles in Press)]
• Ali, N. Mycogenesis of silver nanoparticles by different Aspergillus species [Volume 21, Issue 3, 2014, Pages 1143-1150]
• Ali, N. Fahraeus-Lindqvist effect in an Oldroyd 8-constant fluid [Volume 22, Issue 5, 2015, Pages 1899-1903]
• Ali, N. Analysis of the second-grade fluid flow in a porous channel by Cattaneo-Christov and generalized Fick's theories [Volume 27, Issue 4, 2020, Pages 1945-1954]
• Ali, N. Critical investigation of thermally developing nanofluid flow within slippery tubes and channels: An extended Graetz-Nusselt problem with longitudinal conduction and power-law nanofluid [Volume 29, Issue 6, 2022, Pages 3582-3590]
• Ali, Norhashidah Hj. M. New High Accuracy Non-polynomial Spline Group Explicit Iterative Method for Two Dimensional Elliptic Boundary Value Problems [Volume 24, Issue 6, 2017, Pages 3181-3192]
• Ali, R. Photocatalytic Degradation and Reaction Pathway Studies of Chlorinated Hydrocarbons in Gaseous Phase [Volume 17, Issue 1, 2010]
• Ali, R. Manganese Oxide Doped Noble Metals Supported Catalyst for Carbon Dioxide Methanation Reaction [Volume 17, Issue 2, 2010]
• Ali, R. Photodegradation of N-Methyldiethanolamine over ZnO/SnO2 Coupled Photocatalysts [Volume 17, Issue 2, 2010]
• Ali, S. On the Bayesian analysis of two-component mixture of transmuted Weibull distribution [Volume 28, Issue 3, 2021, Pages 1711-1735]
• Ali, Sajid UNIT NADARAJAH AND HAGHIGHI DISTRIBUTION: PROPERTIES AND APPLICATIONS IN QUALITY CONTROL [(Articles in Press)]
• Ali, Sajid ROBUSTNESS OF SHAPE PARAMETER FOR ERLANG AND WEIBULL BAYESIAN ACCEPTANCE SAMPLING PLANS [(Articles in Press)]
• Ali, Shrooq Jomaa Experimental and numerical investigation of solar air collector with different porous media obstructions [(Articles in Press)]
• Ali, W. Analytical study on couple stress fluid in an inclined channel [Volume 28, Issue 4, 2021, Pages 2164-2175]
• Ali, Z. Complex q-rung orthopair fuzzy variation coefficient similarity measures and their approach to medical diagnosis and pattern recognition [Volume 29, Issue 2, 2022, Pages 894-914]
• Aliaghaei, E. Application of tire crumbs on mechanical properties of a clayey soil subjected to freeze-thaw cycles [Volume 23, Issue 1, 2016, Pages 122-132]
• Aliahmadi, Alireza The effect of network structure on the opinion-aware influence maximization problem [(Articles in Press)]
• Aliakbari, Farhang Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
• Aliakbari Nouri, Fahimeh Designing an Effective Blockchain-Based Service Supply Chain using Integrated FANP-QFD under Uncertainty [(Articles in Press)]
• Aliasgahri, P. Risk-based cooperative scheduling of demand response and electric vehicle aggregators [Volume 26, Special Issue on machine learning, data analytics, and advanced optimization techniques..., 2019, Pages 3571-3581]
• Alibakhshi, Reza An Efficient Buffering Mechanism for Mechanical Capturing Systems [(Articles in Press)]
• Alibeiglou, A. Three-Dimensional Elasticity Solution for Laminated Cross-Ply Panels Under Localized Dynamic Moment [Volume 16, Issue 3, 2009]
• Alidoust, P. Effect of aging on dynamic properties of municipal solid waste: A case study of Kahrizak Landfill, Tehran, Iran [Volume 26, Issue 3, 2019, Pages 1077-1088]
• Aliha, M.R.M. Experimental study on modeI fracture toughness of different asphalt mixtures [Volume 22, Issue 1, 2015, Pages 120-130]
• Alijani, A. Pre- and post-buckling analysis of functionally graded beams subjected to statically mechanical and thermal loads [Volume 22, Issue 3, 2015, Pages 778-791]
• Alijani Nargesi, Mohammadreza An Efficient Buffering Mechanism for Mechanical Capturing Systems [(Articles in Press)]
• Ali Khan, M. Effect of humic acid on adsorption of methylparaben from aqueous solutions onto commercially available granular activated carbons [Volume 29, Issue 3, 2022, Pages 1364-1376]
• Ali Khan, M. F. Multi-class appliance scheduling for cost-effective energy management with constraint and user preferences [Volume 29, Issue 6, 2022, Pages 3257-3272]
• Alikhani, H. Using genetic algorithms for long-term planning of network of bridges [Volume 26, Issue 5, 2019, Pages 2653-2664]
• Alikhani-Kooshkak, R. Multi-objective mathematical modeling of an integrated train makeup and routing problem in an Iranian railway company [Volume 26, Issue 6, 2019, Pages 3765-3779]
• Alilakbari, K. Microstructure and fatigue fracture mechanism for a heavy-duty truck diesel engine crankshaft [Volume 26, Issue 6, 2019, Pages 3313-3324]
• Ali Lakho, N. Reinforcement-dependent long-term deflection response of baked clay beams [Volume 26, Issue 5, 2019, Pages 2723-2730]
• Alim, M. A. Magneto-hydrodynamic mixed convective heat transfer in a nanofluid filled wavy conduit having rotating cylinders [Volume 29, Issue 2, 2022, Pages 486-501]
• Alimadadi, Behnoush An Efficient One-pot Three-component Synthesis of Pyrido[2,3-d]pyrimidine Derivatives in the Presence of Nano Silica-supported Preyssler H14[NaP5W30O110]/SiO2 as a Green and Reusable Catalyst [Volume 23, Issue 6, 2016, Pages 2717-2723]
• Alimoradi, Fakhraddin The Effect of Nanoclay on the Morphological and Physical Properties of Bitumen/PET/Clay Nanocomposites [(Articles in Press)]
• Alinaghian, M. A novel robust model for location-allocation of healthcare facilities considering pre-disaster and post-disaster characteristics [Volume 30, Issue 2, 2023, Pages 619-641]
• Alinaghizadeh, Fatemeh Dimerization ofIsoquinolinium Ylide and 1,3-Dipolar Cycloaddition with Isoquinoline: Synthesis of Nitrogen-Containing Heterocyclic Compounds [Volume 20, Issue 6, 2013, Pages 1881-1884]
• Alinejad Osbouei, Bahman Power System Thévenin Equivalent Estimation Based on Phasor Measurements [Volume 25, Issue 6, 2018, Pages 3559-3568]
• Alinezhad, A. Performance evaluation in aggregate production planning using integrated RED-SWARA method under uncertain condition [Volume 28, Issue 2, 2021, Pages 912-926]
• Alinezhad, A. Simulation-based optimization using DEA and DOE in production systems [Volume 29, Issue 6, 2022, Pages 3470-3488]
• Alinezhad, Alireza COVID-19 Crisis Management: Global Appraisal using Two-Stage DEA and Ensemble Learning Algorithms [(Articles in Press)]
• Alinezhadchamazketi, A. Pd/LaxSr1-xFeO3 perovskite nanocatalysts for selective catalytic reduction of NOx by hydrogen [Volume 22, Issue 6, 2015, Pages 2341-2349]
• Alinia, M. Two-phase natural convection of SiO2-water Nano fluid in an inclined square enclosure [Volume 21, Issue 5, 2014, Pages 1643-1654]
• Alipour, A. Analytical solution to nonlinear behavior of electrostatically actuated nanobeams incorporating van der Waals and Casimir forces [Volume 22, Issue 3, 2015, Pages 1322-1329]
• Alipour, Majid Assessment of labor productivity in construction projects using system dynamic approach [Volume 24, Issue 6, 2017, Pages 2684-2695]
• Alipour, Yazdan Vibration Analysis of Size-Dependent Higher-Order Plates Based on Micropolar Theory [(Articles in Press)]
• Alipour-Sarabi, R. Optimal winding selection for wound-rotor resolvers [Volume 28, Issue 6, 2021, Pages 3429-3436]
• Alipour-Sarabi, R. Design and optimization of a large-scale permanent magnet synchronous generator [Volume 29, Issue 1, 2022, Pages 217-229]
• Alipour-Sarabi, Ramin A survey on the most practical signal processing methods in conditional monitoring in wind turbines [(Articles in Press)]
• Alipour-Sarabi, Ramin A survey on data acquisition methods in conditional monitoring of wind turbines [(Articles in Press)]
• Alipour-Sarabi, Ramin Field Reconstruction Modeling Method of a Linear Variable Area Resolver [(Articles in Press)]
• Alipour-Vaezi, M. A new application of multi-criteria decision-making methods for the scheduling of flexible manufacturing systems: A case study [(Articles in Press)]
• Aliramezani, M. Optimal control of hybrid electric vehicles by considering engine and tire/road noises [Volume 28, Issue 6, 2021, Pages 3129-3140]
• Alirezaei, M. Investigation on the seismic behavior of single story concrete frames equipped with metallic yielding dampers [Volume 22, Issue 6, 2015, Pages 2061-2068]
• Alishahi, Marzieh Precise Shape Prediction of Human Heart Left Ventricle during Diastole Using Fluid-Solid Simulation [(Articles in Press)]
• Alishahi, M.M. Numerical Solution of Compressible Euler Equations for Gas Mixture Applications [Volume 13, Issue 3, 2006]
• Alishahi, M.M. 3-D Thin Layer Navier-Stokes Solution of Supersonic Turbulent Flow [Volume 10, Issue 1, 2003]
• Alishahi, M.M. Computation of High Reynolds Number, Parabolized Navier-Stokes Equations Based on Upwind Algorithm [Volume 6, Issue 2, 1999]
• Alishahi, M.M. A New Set of Conservation Equations Based on the Kinetic Theory Applied to Gas Mixture Problems [Volume 14, Issue 5, 2007]
• Alishahi, Mohammad Mehdi Navier-Stokes computation of some gas mixture problemsin the slip flow regime [Volume 22, Issue 1, 2015, Pages 187-195]
• Alishahi, Mohammad Mehdi Precise Shape Prediction of Human Heart Left Ventricle during Diastole Using Fluid-Solid Simulation [(Articles in Press)]
• Alitalesh, M. Ground Motion Amplification due to Underground Cavities Subjected to Incident SV and P In-Plane Waves [Volume 22, Issue 5, 2015, Pages 1703-1711]
• Alitavoli, M. Post-fatigue life prediction of glare subjected to low-velocity impact [Volume 28, Issue 1, 2021, Pages 305-315]
• Ali Yousif, Badria Almaz Mathematical Model and Stability Analysis for Dusty-hybrid Nanofluid over a Curved Surface with Cattaneo–Christov Heat Flux and Fourier law with Slip Effect [(Articles in Press)]
• Alizad, Arash Numerical Simulation of non-Newtonian Nanofluids Flow in Passive Injection Micromixers Using Mixture Model [Volume 24, Issue 1, 2017, Pages 211-222]
• Alizadeh, Ali Application of Hyperelastic Models in Mechanical Properties prediction of Mouse Oocyte and Embryo Cells at Large Deformations [Volume 25, Issue 2, 2018, Pages 700-710]
• Alizadeh, M. A quasi-3D modified strain gradient formulation for static bending of functionally graded micro beams resting on Winkler-Pasternak elastic foundation [Volume 29, Issue 1, 2022, Pages 26-40]
• Alizadeh, Mehdi Influenza vaccine supply chain network design during the COVID-19 pandemic considering dynamical demand [(Articles in Press)]
• Alizadeh, Mostafa Phenol Removal from Aqueous Solution by Adsorption Process: Study of The Nanoparticles Performance Prepared from Alo vera and Mesquite (Prosopis) Leaves [Volume 24, Issue 6, 2017, Pages 3041-3052]
• Alizadeh, R. A framework for performance evaluation of energy supply chain by a compatible Network Data Envelopment Analysis model [Volume 23, Issue 4, 2016, Pages 1904-1917]
• Alizadeh, R. Non-axisymmetric stagnation-point flow and heat transfer of a viscous luid on a stationary cylinder [Volume 23, Issue 5, 2016, Pages 2238-2246]
• Alizadeh, S. Numerical investigation of Cover Plate in RCS connections [Volume 27, Issue 1, 2020, Pages 10-24]
• Alizadeh, S.H. Mixed Galerkin Finite Element Analysis of Nonaxisymmetrically Loaded.... [Volume 1, Issue 2, 1994]
• Alizadeh, Somayeh ICSI Protocol Advisor: A decision support system for infertility protocol suggestion [(Articles in Press)]
• ALIZADEH, MAHDI A SEMANTIC ACCESS CONTROL MODEL FOR ONLINE SOCIAL NETWORKS [Volume 24, Issue 6, 2017, Pages 3101-3116]
• Alkadir, O. K. A. Investigation of the effect of arteriole clogging of the heart on the characteristics of intravenous blood flow [Volume 30, Issue 1, 2023, Pages 30-38]
• Al-Khaled, Kamel Heat transfer effects on cilia-assisted flow of viscoelastic nanofluid under an inclined magnetic field: Lubrication approximations [(Articles in Press)]
• Alkhani, R. Development of empirical equations for prediction of modulus of elasticity for monodisperse metallic foams [Volume 21, Issue 6, 2014, Pages 1955-1961]
• Al-Kouz, W. Bioconvection phenomenon for the boundary layer flow of magnetohydrodynamic Carreau liquid over a heated disk [Volume 28, Issue 3, 2021, Pages 1896-1907]
• Allahverdizadeh, F. Robust state-feedback controller for linear parameter-varying systems with time-invariant uncertainties [Volume 30, Issue 3, 2023, Pages 1148-1157]
• Allahviranloo, Tofigh Optimal Multi-Products Dynamic Pricing and Inventory Policies for Coordinating Production and Marketing under Fuzzy Environment: Fuzzy Expansion Methods [Volume 23, Issue 5, 2016, Pages 2297-2317]
• Al-Mamun, Mohammad Biosorption of As(III) from aqueous solution by Acacia auriculiformisleaves [Volume 20, Issue 6, 2013, Pages 1871-1880]
• Almanjahie, I. M. Mean estimation using robust quantile regression with two auxiliary variables [Volume 30, Issue 3, 2023, Pages 1245-1254]
• Almasganj, Farshad Remote Diagnosis of Unilateral Vocal Fold Paralysis Using Matching Pursuit based Features Extracted from Telephony Speech Signal [Volume 20, Issue 6, 2013, Pages 2051-2060]
• Almenas, K. Primary System Transient Heating in a Severe Accident Scenario [Volume 2, Issue 1, 1995]
• Almeshaal, Mohammed A. Computation insight of modified thermal distribution of hybrid nanofluids in complex wavy channel: A comparative thermal approach for different nanofluid models [(Articles in Press)]
• Almusawi, A.J.R. Simulation in virtual reality: Robotic training and surgical applications [Volume 26, Issue 6, 2019, Pages 3369-3374]
• Almutiri, Mariam Redn Mathematical Model and Stability Analysis for Dusty-hybrid Nanofluid over a Curved Surface with Cattaneo–Christov Heat Flux and Fourier law with Slip Effect [(Articles in Press)]
• Al-Noor, N. H. L-Moments and calibration-based variance estimators under double stratified random sampling scheme: Application of Covid-19 pandemic [Volume 30, Issue 2, 2023, Pages 814-821]
• Al-Noor, N. H. Mean estimation using robust quantile regression with two auxiliary variables [Volume 30, Issue 3, 2023, Pages 1245-1254]
• Aloui, F. Numerical and experimental investigation of impinging turbulent flow of twin jets against a wall [Volume 26, Issue 6, 2019, Pages 3271-3282]
• Alpaslan KÖROĞLU, Mehmet THE USABILITY OF EARTHQUAKE RESISTANT STEEL BAR AS A SHEAR CONNECTOR IN COMPOSITE STRUCTURES [Volume 21, Issue 2, 2014, Pages 276-283]
• Alpay, S. Integrated cell formation and part scheduling: A new mathematical model along with two meta-heuristics and a case study for truck industry [Volume 31, Issue 11, 2024, Pages 888-905]
• Alqudah, Mohammad Numerical and stability analysis of Cu-Al2O3 water based hybrid nanofluid through a permeable shrinking sheet: Multiple solutions [(Articles in Press)]
• Al-Sabaeei, A. Determining the effect of ageing of nano-clay modified bitumen using atomic force microscopy [Volume 28, Issue 5, 2021, Pages 2534-2545]
• Alsaedi, A Importance of activation energy and heat source on nanoliquid flow with gyrotactic microorganisms [Volume 27, Issue 6, 2020, Pages 3381-3389]
• Alsaedi, A. Effects of Joule heating and thermophoresis on the stretched flow with convective boundary condition [Volume 21, Issue 3, 2014, Pages 682-692]
• Alsaedi, A. Novel aspects of Soret and Dufour in entropy generation minimization for Williamson fluid flow [Volume 27, Issue 5, 2020, Pages 2451-2464]
• Alsaedi, A. Consequences of activation energy and chemical reaction in radiative flow of tangent hyperbolic nanoliquid [Volume 26, Issue 6, 2019, Pages 3928-3937]
• Alsaedi, A. Entropy generation analysis of peristaltic flow of magneto-nanoparticles suspended in water under second-order slip conditions [Volume 27, Issue 6, 2020, Pages 3434-3446]
• Alsaedi, A. Entropy generation optimization and activation energy in flow of Walters-B nanomaterial [Volume 28, Issue 3, 2021, Pages 1917-1925]
• Alsaedi, Ahmad Heat transfer analysis in peristaltic slip flow with Hall and ion-slip currents [Volume 23, Issue 6, 2016, Pages 2771-2783]
• Alsaedi, Ahmed Modeling for radiated Marangoni convection flow of magneto-nanoliquid subject to activation energy and chemical reaction [Volume 27, Issue 6, 2020, Pages 3390-3398]
• Al-Sharafi, M. A. Acceptance of online social networks as technology-based education tools among higher institution students: Structural equation modeling approach [Volume 26, Special Issue on: Socio-Cognitive Engineering, 2019, Pages 136-144]
• Alshomrani, A.S. Soret and Dufour effects on doubly diffusive convection of nanofluid over a wedge in the presence of thermal radiation and suction [Volume 26, Issue 5, 2019, Pages 2817-2826]
• Altabey, W.A. Tensile creep monitoring of basalt fiber-reinforced polymer plates via electrical potential change and artificial neural network [Volume 27, Issue 4, 2020, Pages 1995-2008]
• Altabey, Wael A. A modified wavelet energy rate-based damage identification method for steel bridges [Volume 25, Issue 6: Special Issue Dedicated to Professor Goodarz Ahmadi, 2018, Pages 3210-3230]
• Al-Talib, Azza N. Simulation of Flow Over The Side Weir Using Simulink [Volume 20, Issue 4, 2013, Pages 1094-1100]
• Altun, Fatih AExperimental investigation into steel ber addition to reinforced concrete cantilever beams under a cyclic load effect [Volume 21, Issue 6, 2014, Pages 1743-1749]
• Alvanchi, A. Applying materials waste quantification to cement waste reduction in residential buildings of Tehran: A case study [Volume 26, Issue 5, 2019, Pages 2633-2652]
• Alvanchi, A. Using genetic algorithms for long-term planning of network of bridges [Volume 26, Issue 5, 2019, Pages 2653-2664]
• Alvanchi, A. Improving facility management of public hospitals in Iran using building information modeling [Volume 27, Issue 6, 2020, Pages 2817-2829]
• Alvanchi, A. Exploring Worker’s Absence Pattern in the Construction Industry in Iran [Volume 28, Issue 2, 2021, Pages 586-597]
• Alvanchi, Amin A novel BIM strategic plan development method for the water industry of Iran [(Articles in Press)]
• Alvarez, E. An alternative expression for the constant c4[n] with desirable properties [Volume 29, Issue 6, 2022, Pages 3388-3393]
• ALVER, Veysel An alternative boom design and welding technique to minimize energy consumption during boom production [Volume 24, Issue 6, 2017, Pages 2856-2863]
• Aly, Sh. Analysis of non-Newtonian fluid with phase flow model [Volume 28, Issue 6, 2021, Pages 3743-3752]
• Alzahrani, A. K. Embedded solitons with X^((2)) nonliner susceptibility [Volume 30, Issue 6, 2023, Pages 2125-2142]
• Alzahrani, A. K. Numerical study on the effect of magnetic field and discrete heating on free convection in a porous container [Volume 29, Issue 6, 2022, Pages 3063-3071]
• Amani, B. Making a Decision Between the Rehabilitation and Reconstruction of Asphalt Pavements Using the Rough-Set Theory [Volume 16, Issue 2, 2009]
• Amani, E. Computational optimization of a UFAD system using large eddy simulation [Volume 27, Issue 6, 2020, Pages 2871-2888]
• Amani, J. Mixed discrete least square meshless method for solution of quadratic partial differential equations [Volume 21, Issue 3, 2014, Pages 492-504]
• Amani, V. Study of UV-Vis absorption spectra of magnetic molecule tripyridinium bis[tetrabromidoferrate(III)] bromide with density functional formalisms [Volume 29, Issue 3, 2022, Pages 1319-1329]
• Amani-Tehran, M. Morphology and Mechanical Properties of Polyacrylonitrile/Multi-Walled Carbon Nanotube (PAN/MWNTs) Nanocomposite Electrospun Nanofibers [Volume 17, Issue 1, 2010]
• AMEH, O. J. THE LEADERSHIP PROFILE OF NIGERIAN CONSTRUCTION PROJECT MANAGERS [Volume 21, Issue 4, 2014, Pages 1241-1248]
• Ameli-Basiri, Mahdi A Simple Iterative Method for Dynamic Analysis of MDOF Systems with Arbitrary Time-Varying Coefficients Based on Successive Differentiation [(Articles in Press)]
• Amen, Azad I. Integrability and dynamics Analysis of the Chaos Laser System [(Articles in Press)]
• Ameri, Ehsan A Multi-Objective Multi-State Degraded System to Optimize Maintenance/Repair Costs and System Availability [Volume 24, Issue 1, 2017, Pages 355-363]
• Ameri, M.Hassan. An attribute-based anonymous broadcast encryption scheme with adaptive security in the standard model [Volume 26, Issue 3, 2019, Pages 1700-1713]
• Ameri, S. Predicting the Production Performance of Gas Reservoirs [Volume 1, Issue 3, 1994]
• Amezquita-Sanchez, J. P. Nonlinear measurements for feature extraction in structural health monitoring [Volume 26, Issue 6, 2019, Pages 3051-3059]
• Amezquita-Sanchez, J.P. Feature extraction and classication techniques for health monitoring of structures [Volume 22, Issue 6, 2015, Pages 1931-1940]
• Amezquita-Sanchez, J.P. Current efforts for prediction and assessment of natural disasters: Earthquakes, tsunamis, volcanic eruptions, hurricanes, tornados, and floods [Volume 24, Issue 6, 2017, Pages 2645-2664]
• Amezquita-Sanchez, J.P. Wireless smart sensors for monitoring the health condition of civil infrastructure [Volume 25, Issue 6, 2018, Pages 2913-2925]
• Amezquita-Sanchez, Juan P. Neurocomputing in Civil Infrastructure [Volume 23, Issue 6, 2016, Pages 2417-2428]
• Amezquita-Sancheza, J.P. Machine learning in structural engineering [Volume 27, Issue 6, 2020, Pages 2645-2656]
• Amidian, Ali A. A Traffic-aware Scheduling Algorithm for IEEE 802.16 Mesh Mode [Volume 21, Issue 3, 2014, Pages 803-814]
• Amidpour, Majid Design of mixed refrigerant cycle for low temperature processes using thermodynamic approach [Volume 20, Issue 4, 2013, Pages 1254-1268]
• Amidpour, Majid Performance Study on Dehumidifier of Packed bed Liquid desiccant System [Volume 21, Issue 1, 2014, Pages 222-228]
• Amin, A. Effects of heat and mass transfer on stagnation point flow of micropolar Maxwell fluid over Riga plate [Volume 28, Issue 6, 2021, Pages 3753-3766]
• Aminbakhsh, Saman Optimization-based scheduling of construction projects with generalized precedence relationships: A real-life case study [Volume 31, Issue 19, 2024, Pages 1809-1824]
• Amin Eskandari, Mahsa Diagnosing and evaluating the severity of chronic obstructive pulmonary disease based on the time-frequency features of the S transform applied to the lung sound signal [(Articles in Press)]
• Aminfar, H. Numerical investigation into the effect of viscosity on bubble dynamics in a narrow channel [Volume 27, Issue 5, 2020, Pages 2419-2432]
• Amini, A. A semi-supervised clustering approach using labeled data [Volume 30, Issue 1, 2023, Pages 104-115]
• Amini, A. ConvexCo: a semi-supervised clustering approach based on adaptive multi-objective Cuckoo in combination with convex hull [(Articles in Press)]
• Amini, Alborz Realization of Three-Dimensional Micro and Nano-Structures on Silicon Substrates [Volume 17, Issue 2, 2010]
• Amini, Cyrus Developing multi-objective optimization model with conflicting goals to improve the surge protection devices design for water hammer [(Articles in Press)]
• Amini, F. Designing Market-Based Control with a Genetic Algorithm [Volume 21, Issue 6, 2014, Pages 1781-1792]
• Amini, H. Freight modal policies toward a sustainable society [Volume 27, Issue 6, 2020, Pages 2690-2703]
• Amini, J. Generation of Orthoimage from High-Resolution DEM and High-Resolution Image [Volume 15, Issue 5, 2008]
• Amini, J. Optimum Learning Rate in Back-Propagation Neural Network for Classication of Satellite Images (IRS-1D) [Volume 15, Issue 6, 2008]
• Amini, J. A fuzzy-based method for road area detection in high resolution SAR images [Volume 22, Issue 3, 2015, Pages 1085-1093]
• Amini, Mojtaba SBA-15-Supported Copper (II) Complex: An Efficient Heterogeneous Catalyst for Azide-Alkyne Cycloaddition in Water [Volume 25, Issue 3, 2018, Pages 1335-1343]
• Amini, Negar The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
• Amini, Y. Modified fixed-grid finite element method in shape ‎optimization problems based on gradientless method [Volume 21, Issue 1, 2014, Pages 147-161]
• Amini, Y. Fluid–structure interaction analysis of a piezoelectric flexible plate in a cavity filled with a fluid [Volume 23, Issue 2, 2016, Pages 559-565]
• Amini, Y. Heat transfer enhancement of a cylinder by flexible fins in turbulent flow [Volume 30, Issue 1, 2023, Pages 64-76]
• Amini, Yasser Piezoelectric energy harvesting from vertical piezoelectric beams in the horizontal fluid flows [Volume 24, Issue 5, 2017, Pages 2396-2405]
• Amini, Zahra Using neural network for predicting hourly origin-destination matrices from trip data and environmental information [Volume 31, Issue 19, 2024, Pages 1711-1726]
• Amini, Zahra Analyzing the impacts of gasoline price change on nationwide trip demand and drivers' behavior using regression discontinuity design [Volume 31, Issue 19, 2024, Pages 1767-1778]
• AMINI, MORTEZA A SEMANTIC ACCESS CONTROL MODEL FOR ONLINE SOCIAL NETWORKS [Volume 24, Issue 6, 2017, Pages 3101-3116]
• Aminian, K. Predicting the Production Performance of Gas Reservoirs [Volume 1, Issue 3, 1994]
• Aminifar, F. Generation rejection scheme based on a combinational rotor angle trajectory prediction [Volume 28, Special issue on collective behavior of nonlinear dynamical networks, 2021, Pages 1579-1591]
• Aminifar, F. Electricity market assessment in wind energy integrated power systems with the potential of flexibility: A boundary condition approach [Volume 29, Issue 2, 2022, Pages 727-738]
• Aminifar, F. Smart microgrid educational laboratory: An integrated electric and communications infrastructure platform [Volume 29, Issue 5, 2022, Pages 2552-2565]
• Aminifar, Farrokh A Multi-Objective Framework for Enhancing the Reliability and Minimizing the Cost of PMU Deployment in Power Systems [Volume 23, Issue 6, 2016, Pages 2917-2927]
• Aminifar, Farrokh State estimation in unbalanced distribution networks by symmetrical components [Volume 31, Issue 17, 2024, Pages 1517-1529]
• Amini-Fazl, Mohammad Sadegh Gas separation properties of crosslinked and non-crosslinked Carboxymethylcellulose (CMC)membranes [Volume 20, Issue 6, 2013, Pages 1921-1928]
• Aminikhah, H. Sub-equation method for the fractional regularized long-wave equations with conformable fractional derivatives [Volume 23, Issue 3, 2016, Pages 1048-1054]
• Amininasab, M. An Alternative Mechanism for the formation of High Density Lipoprotein in Peripheral Tissues [Volume 23, Issue 2, 2016, Pages 600-608]
• Amini-sheshdeh, Zh. A new on-chip sensor design for NBTI using slew rate monitoring [Volume 20, Issue 6, 2013, Pages 2093-2098]
• Amini-sheshdeh, Zh. New HCI and TDDB sensors based on transition time monitoring [Volume 22, Issue 6, 2015, Pages 2447-2456]
• Amini Tehrani, H. An effective approach to structural damage localization in flexural members based on generalized S-transform [Volume 26, Issue 6, 2019, Pages 3125-3139]
• Amin-Naseri, Mohammad Reza Application of a hybrid model based on multiple linear regression -principle component analysis (MLR-PCA) for electricity export forecasting [(Articles in Press)]
• Amin-Naseri, M.R. An intelligent model for predicting the day-ahead deregulated market clearing price: A hybrid NN-PSO-GA approach [Volume 26, Issue 6, 2019, Pages 3846-3856]
• Aminnayeri, M. An Analytic Variable Limit np Control Chart [Volume 17, Issue 1, 2010]
• Aminnayeri, M. Novel properties along with solution methods for permutation flowshop scheduling [Volume 23, Issue 5, 2016, Pages 2261-2276]
• Aminnayeri, M. Optimizing the number of outbound doors in the crossdock based on a new queuing system with the assumption of beta arrival time [Volume 25, Issue 4, 2018, Pages 2282-2296]
• Aminnayeri, Majid Hedging strategies for multi-period portfolio optimization [Volume 22, Issue 6, 2015, Pages 2644-2663]
• Aminpour, Younes Characteristics and Time Scale of Local Scour Downstream Stepped Spillways [Volume 25, Issue 2, 2018, Pages 532-542]
• Amir, S. Nonlinear pull-in instability of boron nitride nano-switches considering electrostatic and Casimir forces [Volume 21, Issue 3, 2014, Pages 1183-1196]
• AmirAbadi Farahani, M. M. Investigation into opportunities and challenges of cross-border electricity trade in Iran [Volume 30, Issue 3, 2023, Pages 1159-1168]
• Amirghodsi, S. A dual model for selecting technology and technology transfer method using a combination of the Best-Worst Method (BWM) and goal programing [Volume 29, Issue 5, 2022, Pages 2628-2646]
• Amiri, A. Phase II Monitoring of Autocorrelated Polynomial Proles in AR(1) Processes [Volume 17, Issue 1, 2010]
• Amiri, A. Developing functional process capability indices for simple linear prole [Volume 21, Issue 3, 2014, Pages 1096-1104]
• Amiri, A. Effect of processing time on microstructure of surface and corrosion resistance of coatings resulting from plasma electrolytic oxidation on titanium alloy in hydroxyapatite nano-particles electrolyte [Volume 27, Issue 1, 2020, Pages 302-309]
• Amiri, A. Variable sample size of exponentially weighted moving average chart with measurement errors [Volume 28, Issue 4, 2021, Pages 2386-2399]
• Amiri, A. Monitoring attributed social networks based on count data and random effects [Volume 29, Issue 3, 2022, Pages 1581-1591]
• Amiri, A. Developing mixed EWMA-CUSUM and CUSUM-EWMA control charts based on MRSS and DRSS procedures [Volume 29, Issue 5, 2022, Pages 2756-2771]
• Amiri, Amirhossein Robust economic-statistical design of multivariate exponentially weighted moving average control chart under uncertainty with intervaldata [Volume 22, Issue 3, 2015, Pages 1189-1202]
• Amiri, Amirhossein A Feedback-oriented Data Delay Modeling in a Dynamic Neural Network for Time Series Forecasting [Volume 23, Issue 2, 2016, Pages 711-720]
• Amiri, Amirhossein Monitoring multivariate-attribute quality characteristics in two stage processes using discriminant analysis based control charts [Volume 23, Issue 2, 2016, Pages 757-767]
• Amiri, Amirhossein Robust Holt-Winter Based Control Chart for Monitoring Autocorrelated Simple Linear Profiles With Contaminated Data [Volume 23, Issue 3, 2016, Pages 1345-1354]
• Amiri, Amirhossein Step Change Point Estimation of the First-order Autoregressive Autocorrelated Simple Linear Profiles [Volume 23, Issue 6, 2016, Pages 2995-3008]
• Amiri, Amirhossein Maximum Multivariate Exponentially Weighted Moving Average and Maximum Multivariate Cumulative Sum Control Charts for Simultaneous Monitoring of Mean and Variability of Multivariate Multiple Linear Regression Profiles [Volume 24, Issue 5, 2017, Pages 2605-2622]
• Amiri, Amirhossein Optimization of multi-response problems with continuous functional responses by considering dispersion effects [Volume 25, Issue 4, 2018, Pages 2267-2281]
• Amiri, Amirhossein Identifying the time of step change and drift in Phase II monitoring of autocorrelated logistic regression profiles [Volume 25, Issue 6, 2018, Pages 3654-3666]
• Amiri, Amirhossein Dynamic batch sentencing mechanisms for yield-based product acceptance determination with the simple linear profiles [(Articles in Press)]
• Amiri, Amirhossein Improved Control Charts for Phase II Monitoring of Simple Linear Profiles Using Auxiliary Information [(Articles in Press)]
• Amiri, F. Qualitative Study of Nanoassembly Process: 2-D Molecular Dynamics Simulations [Volume 17, Issue 1, 2010]
• Amiri, F. Economic-statistical design of adaptive X-bar control chart: a Taguchi loss function approach [Volume 21, Issue 3, 2014, Pages 1096-1104]
• Amiri, F. Optimization of facility location-allocation model for base transceiver station antenna establishment based on genetic algorithm considering network effectiveness criteria (case study north of Kermanshah) [Volume 30, Issue 5, 2023, Pages 1841-1854]
• Amiri, H. Numerical modelling of flow field in compound channels with non-prismatic floodplains [Volume 25, Issue 5, 2018, Pages 2413-2424]
• Amiri, Hossein A Parametric Study of Optimal Number and Location of Radiant Heaters in Enclosures with Participating Media [Volume 23, Issue 1, 2016, Pages 206-217]
• Amiri, Iman An Investigation of Friction Angle Correlation with Geotechnical Properties for Granular Soils Using GMDH Type Neural Networks [Volume 22, Issue 1, 2015, Pages 157-164]
• Amiri, M. Numerical Analysis of Flow Over Weirs and Labyrinth Side Weirs [Volume 22, Issue 6, 2015, Pages 1994-2000]
• Amiri, M. Evaluation of Safety Risks in Construction Using Fuzzy Failure Mode and Effect Analysis (FFMEA) [Volume 23, Issue 6, 2016, Pages 2546-2556]
• Amiri, M. A Methodology for Optimizing Statistical Multi-Response Problems Using Fuzzy Goal Programming [Volume 15, Issue 3, 2008]
• Amiri, M. A Methodology for Analyzing the Transient Reliability of Systems with Identical Components and Identical Repairmen [Volume 14, Issue 1, 2007]
• Amiri, M. Redundancy allocation problem with a mixed strategy for a system with k-out-of-n subsystems and time-dependent failure rates based on Weibull distribution: An optimization via simulation approach [Volume 26, Issue 2, 2019, Pages 1023-1038]
• Amiri, M. Optimal fleet composition and mix periodic location-routing problem with time windows in an offshore oil and gas industry: A case study of National Iranian Oil Company [Volume 26, Issue 1, 2019, Pages 522-537]
• Amiri, M. A new approach in the DEA technique for measurement of productivity of decision-making units through efficiency and effectiveness [Volume 30, Issue 2, 2023, Pages 822-832]
• Amiri, Maghsoud An Equitable Fuzzy Approach for Facility Delocation: A Case Study of Banks Merging [(Articles in Press)]
• Amiri, O. The root causes of construction project failure [Volume 25, Issue 1, 2018, Pages 93-108]
• Amiri, Saeed A CLASS OF SYNCHRONIZED NONLINEAR TWO-DOF SYSTEMS WITH CLOSED FORM SOLUTION [Volume 25, Issue 6: Special Issue Dedicated to Professor Goodarz Ahmadi, 2018, Pages 3258-3273]
• Amiri Atashgah, M. A. A real-time exhaustive search algorithm for the weapon-target assignment problem [Volume 28, Special issue on collective behavior of nonlinear dynamical networks, 2021, Pages 1539-1551]
• Amirifar, L. Investigation into the interaction between quartz nanostructures and human cell lines for tissue engineering [Volume 27, Issue 5, 2020, Pages 2343-2352]
• Amiri ‎, Maghsoud A framework for prioritizing and allocating the six sigma projects using fuzzy TOPSIS and fuzzy expert system [Volume 21, Issue 6, 2014, Pages 2281-2294]
• Amiripour, S.S.M. Synchronized timetables for bus rapid transit networks in small and large cities [Volume 28, Issue 1, 2021, Pages 477-491]
• Amirirad, E. Reduction of Thermodynamic Losses in a Supersonic Nucleating Steam Nozzle by Spraying Water Droplets [Volume 16, Issue 3, 2009]
• Amirirad, E. Suppression of Condensation Shock in Wet Steam Flow by Injection of Water Droplets in Different Regions of a Laval Nozzle [Volume 17, Issue 5, 2010]
• Amiri Rad, E. Analytical investigation of simultaneous effects of friction and heating to a supersonic nucleating Laval nozzle [Volume 21, Issue 5, 2014, Pages 1700-1708]
• Amiri Rad, E. Analytic Investigation of the Effects of Condensation Shock on Turbulent Boundary Layer Parameters of Nucleating Flow in a Supersonic Convergent-Divergent Nozzle [Volume 21, Issue 5, 2014, Pages 1709-1718]
• Amiri Rad, E. Performance evaluation of a kalina cycle using a novel extended thermodynamic analysis [Volume 30, Issue 3, 2023, Pages 953-968]
• Amiri Rad, Ehsan A note on the critical gap of bubble coalescence during foaming process: A diffuse-interface modeling [Volume 25, Issue 3, 2018, Pages 1303-1311]
• Amirkhan, M. Designing a Multi-echelon and Multi-product Sustainable Biomass Supply Chain Network Considering Input Material Diversity [(Articles in Press)]
• Amirkhani, Leila Synthesis and Application of Silica Aerogel-MWCNT Nanocomposites for Adsorption of Organic Pollutants [Volume 17, Issue 2, 2010]
• Amirnasr, M. Ligand Field Photoquation Reactions of Trans-[co"((DO)(DOH)pn)(amine)... [Volume 4, Issue 3, 1997]
• Amirnasr, M. Synthesis and Characterization... [Volume 4, Issue 1, 1997, Pages 35-45]
• Amirnasr, M. Solid State Kinetic Parameters.... [Volume 4, Issue 1, 1997, Pages 46-52]
• Amirnejat, S. Sulfated polysaccharide coated BaFe12O19: A magnetically separable bifunctional catalyst for the synthesis of benzopyranopyrimidines derivatives and its antibacterial activity evaluation [Volume 28, Issue 3, 2021, Pages 1400-1413]
• Amirtaheri, Omid A bi-level programming model for decentralized manufacturer-distributer supply chain considering cooperative advertising [Volume 25, Issue 2, 2018, Pages 891-910]
• Amjadi, A. Numerical Investigation of Fast Axial Flow High Power CW CO2 Laser: Considering the Effect of intensity Variation [Volume 10, Issue 4, 2003]
• Amjadi, A. Second Harmonic Generation (SHG) Measurement Affected by Electric Field [Volume 14, Issue 3, 2007]
• Amjadi, A. H. Stochastic nonlinear ground response analysis: A case study site in Shiraz, Iran [Volume 28, Issue 4, 2021, Pages 2070-2086]
• Amjady, N. Voltage Security Monitoring of Power Systems by a New Continuation Method [Volume 9, Issue 4, 2002]
• Amjady, N. Incorporating bus-bar switching actions into AC optimal power flow to ovoid over-current status [Volume 26, Special Issue on machine learning, data analytics, and advanced optimization techniques..., 2019, Pages 3646-3655]
• Amjadzadeh, M. An Innovative Emotion Assessment using Physiological Signals Based on The Combination Mechanism [Volume 24, Issue 6, 2017, Pages 3157-3170]
• Ammar, S. I. Analysis of Stationary Fluid Queue Driven by State-Dependent Birth-Death Process Subject to Catastrophes [Volume 31, Issue 14, 2024, Pages 1149-1158]
• Amoozad Khalili, H. Designing a Multi-echelon and Multi-product Sustainable Biomass Supply Chain Network Considering Input Material Diversity [(Articles in Press)]
• Amoozad-Khalili, Hossein Toward sustainability in designing an agricultural supply chain network: A case study on palm date [Volume 31, Issue 18, 2024, Pages 1691-1709]
• Amoozegar, Maryam A Multi-Objective Approach to Model-Driven Performance Bottlenecks Mitigation [Volume 22, Issue 3, 2015, Pages 1018-1030]
• Amouzegar, H. Comparative study of seismic structural response to real and spectrum matched ground motions [Volume 22, Issue 1, 2015, Pages 92-106]
• Amraee, Turaj Robust Damping Controller for Synchronous Generators under Operational Uncertainties [(Articles in Press)]
• Amrollahi, R. Variational Finite Element Method for Axisymmetric Magneto-Hydrodynamic Equilibrium [Volume 10, Issue 4, 2003]
• Anahid, M. Modeling of Moving Boundaries in Large Plasticity Deformations via an Enriched Arbitrary Lagrangian-Eulerian FE Method [Volume 17, Issue 2, 2010]
• Analui, B. Three decades of the Shuffled Complex Evolution (SCE-UA) optimization algorithm: Review and applications [Volume 26, Issue 4: Special Issue Dedicated to Professor Abolhassan Vafai, 2019, Pages 2015-2031]
• Anand, A. A holistic framework for lot sizing problem for fast-moving perishable products [Volume 27, Issue 4, 2020, Pages 2021-2039]
• Anand, R B A STUDY ON REPAIRING PROCEDURES INVOLVED WITH LEADING EDGE CRACKS, OFFSETTING, OVERBITE & UNDERBITE OF GLASS FABRIC REINFORCED COMPOSITE BASED WIND TURBINE BLADES [(Articles in Press)]
• Ananthan, S.S. Mixed convection in a lid-driven cavity with sinusoidal boundary temperature at the bottom wall in the presence of magnetic field [Volume 23, Issue 3, 2016, Pages 1027-1036]
• Anarchi, M. The effect of silica/zeolite-A nanocomposite on the polyvinyl acetate wood adhesive [Volume 28, Issue 3, 2021, Pages 1953-1961]
• Anas, M. M. Quantile regression-ratio-type estimators for mean estimation under complete and partial auxiliary information [Volume 29, Issue 3, 2022, Pages 1705-1715]
• Anasuya, K. V. A facile plant-mediated green synthesis of Magnesium oxide nanoparticles by combustion method using Terminalia Chebula seed and their applications in the synthesis of selenoesters and biodiesel from used cooking oil [(Articles in Press)]
• Anbarjafari, Gholamreza A Robust Proportion-Preserving Composite Objective Function for Scale-Invariant Multi-Objective Optimization [Volume 24, Issue 6, 2017, Pages 2977-2991]
• Anbia, M. Adsorption of methyl-orange from aqueous solution onto nanoporous silica materials [Volume 21, Issue 6, 2014, Pages 2036-2048]
• Anbia, M. Development of Li-doped cubic P mesoporous silica MCM-48 as a novel humidity sensor [Volume 23, Issue 3, 2016, Pages 1073-1079]
• Anbia, M. Study of the effect of organic binders on 13X zeolite agglomeration and their CO2 adsorption properties [Volume 26, Issue 3, 2019, Pages 1497-1504]
• Andam, Reza Designing a Dynamic Model of Brand Value-Creation for Sports Clubs [(Articles in Press)]
• Anderson, James Evaluation of Video Detection System as a Traffic Data Collection Method [Volume 22, Issue 6, 2015, Pages 2092-2102]
• Andromeda, T. Architecture and training algorithm of feed forward articial neural network to predict material removal rate of electrical discharge machining process [Volume 21, Issue 6, 2014, Pages 2224-2231]
• Angooraj Taghavi, S. Optimization of ethylene oxychlorination fluidized-bed reactor using Differential Evolution (DE) method [Volume 24, Issue 3, 2017, Pages 1253-1263]
• Angra, S. Coexistent scheduling in the tandem flow path configuration of a flexible manufacturing system by using an advanced grey wolf optimizer [Volume 29, Issue 6, 2022, Pages 3404-3417]
• Anhorn, J.L. Athabasca Bitumen: Oxygenate Blends and Viscosity Models [Volume 1, Issue 3, 1994]
• Ani, F. Che Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
• A. Niaki, S.T. A bi-objective model to optimize reliability and cost of k-out-of-n series-parallel systems with tri-state components [Volume 24, Issue 3, 2017, Pages 1585-1602]
• Anılan, Tuğçe The estimation of flood quantiles in ungauged sites using teaching-learning based optimization and artificial bee colony algorithms [Volume 25, Issue 2, 2018, Pages 632-645]
• Anjabin, N. Modeling the CO gas response of PEDOT:PSS/Fe(salen) thin film for a gas sensor [Volume 27, Issue 3, 2020, Pages 1227-1233]
• Anjum, N. Entropy generation analysis for chemically reactive flow of Sutterby nanofluid considering radiation aspects [Volume 31, Issue 12, 2024, Pages 935-944]
• Anoushehei, M. Empirical evaluation of cyclic behavior of rotational friction dampers with different metal pads [Volume 25, Issue 6, 2018, Pages 3021-3029]
• Ansari, Aftab Ahmed Real-Time Implementation of The Fuzzy Logic Controlled Parallel Protection Technique to Enhance the DFIG System's FRT Capability [(Articles in Press)]
• Ansari, N. A. Prediction of an optimum engine response based on different input parameters on common rail direct injection diesel engine: A response surface methodology approach [Volume 28, Issue 6, 2021, Pages 3181-3200]
• Ansari, Noureddin N. Design and Development of a Robotic System for Hand’s Wrist-Fingers Rehabilitation [(Articles in Press)]
• Ansari, R. Stability Analysis of Boron Nitride Nanotubes via a Combined Continuum-Atomistic Model [Volume 20, Issue 6, 2013, Pages 2314-2322]
• Ansari, R. Pre- and post-buckling analysis of functionally graded beams subjected to statically mechanical and thermal loads [Volume 22, Issue 3, 2015, Pages 778-791]
• Ansari, R. Nonlocal nonlinear first-order shear deformable beam model for postbuckling analysis of magneto-electro-thermo elastic nanobeams [Volume 23, Issue 6, 2016, Pages 3099-3114]
• Ansari, R. On the oscillatory frequency of the carbon nanotube-based nanothermometers [Volume 24, Issue 3, 2017, Pages 1615-1625]
• Ansari, R. An Algorithmic Framework for Improving the Performance of the Critical Chain Buffer Sizing Method [Volume 25, Issue 1, 2018, Pages 74-92]
• Ansari, R. Studying buckling of composite rods made of hybrid carbon fiber/carbon nanotube-reinforced polyimide using multi-scale FEM [Volume 27, Issue 1, 2020, Pages 252-261]
• Ansari, R. On the vibration of postbuckled functionally graded-carbon nanotube reinforced composite annular plates [Volume 26, Issue 6, 2019, Pages 3857-3874]
• Ansari, Reza Isogeometric Vibration Analysis of Small-Scale Timoshenko Beams Based on the Most Comprehensive Size-Dependent Theory [Volume 25, Issue 3, 2018, Pages 1864-1878]
• Ansarian, Hossein Computational Investigation of Vortex Breakdown over a Pitching Delta Wing at Supersonic Speeds [Volume 24, Issue 6, 2017, Pages 2915-2928]
• Ansari-Asl, K. An Innovative Emotion Assessment using Physiological Signals Based on The Combination Mechanism [Volume 24, Issue 6, 2017, Pages 3157-3170]
• Ansari Khalkhali, R. Post-fatigue life prediction of glare subjected to low-velocity impact [Volume 28, Issue 1, 2021, Pages 305-315]
• Ansorge, R. Discretization of Problems Whose Weak Solutions are Uniquely Determined by Inequalities [Volume 7, Issue 1, 2000]
• Anthony Jnr., B. Case based reasoning for green information systems infusion and assimilation among IT professionals in university campuses [Volume 26, Special Issue on: Socio-Cognitive Engineering, 2019, Pages 127-135]
• Antucheviciene, Jurgita HYBRID MULTIPLE CRITERIA DECISION MAKING METHODS: A REVIEW OF APPLICATIONS IN ENGINEERING [Volume 23, Issue 1, 2016, Pages 1-20]
• Antufiev, Boris A. Dynamic behavior and stability of a discretely supported plate with a heat-proof coating under the action of an arbitrarily directed moving load [(Articles in Press)]
• A Nurul, M. A new approach for cold extrusion process: Dimples indentation on sliding contact surface and palm oil as an alternative lubricant [Volume 24, Issue 6, 2017, Pages 2875-2886]
• Anvari, A. Mode Locking in Iran-Tokamaki (IR-T1) [Volume 9, Issue 2, 2002]
• Anvari, A. Modification of plasma Confinement using Resonant.... [Volume 4, Issue 1, 1997, Pages 71-76]
• Anwar, Md Nishat Parallel control structure based sliding mode controller for second order unstable processes with Dead-Time [(Articles in Press)]
• Anwar, Md. Nishat A Unified Controller Design Method for Multiple Control Structure with Perspective to Parametric Independent Control of Boost Converter [(Articles in Press)]
• Anya, Augustine Igwebuike Analysis of waves subjected to mechanical force and voids source in an initially stressed magneto-elastic medium with corrugated and impedance boundary [(Articles in Press)]
• A. Omar, H. Determining the effect of ageing of nano-clay modified bitumen using atomic force microscopy [Volume 28, Issue 5, 2021, Pages 2534-2545]
• A. P., Senthil Kumar Biosynthesis of Silver Nanoparticles using Histiopteris Incisa leaf extract and their Characterization and Thermophysical study [(Articles in Press)]
• A. P., Sudheer Manipulability Analysis of a Tree Type Humanoid Upper-Body Robot with Dual Redundant Arms [(Articles in Press)]
• A.Paèz, Carlos Sol-gel preparation and characterisation of SnO2 powders employed as catalyst for phenol photodegradation [Volume 20, Issue 6, 2013, Pages 1891-1898]
• Aparcana, Aldryn About a composite fractional relaxation equation via regularized families [Volume 25, Issue 1, 2018, Pages 329-338]
• Aqeel, M. Series solution of slip ow of Al2O3 and Fe3O4 nanoparticles in a horizontal channel with a porous medium by using least square and Galerkin methods [Volume 27, Issue 5, 2020, Pages 2465-2477]
• Aqsa, A. Numerical Investigation of Non-linear Radiation Effects in Boundary Layer Oblique Stagnation Point Flow of non-Newtonian Fluids over a Symmetrically Stretching Surface under the Effects of Magnetic Field [(Articles in Press)]
• Aqsa, Aqsa Rheology of Burgers' model with Cattaneo-Christov heat flux in the presence of heat source/sink and magnetic field [Volume 26, Issue 1, 2019, Pages 323-330]
• Arab-Abousadi, Z. Combining the CORGC and UNIFAC Models for Prediction of Multicomponent VLE Behavior for Polar Systems [Volume 9, Issue 1, 2002]
• Arabani, M. Application of Rough Set Theory as a New Approach to Simplify Dams Location [Volume 13, Issue 2, 2006]
• Arabani, M. Making a Decision Between the Rehabilitation and Reconstruction of Asphalt Pavements Using the Rough-Set Theory [Volume 16, Issue 2, 2009]
• Arabani, M. Liquefaction prediction using rough set theory [Volume 26, Issue 2, 2019, Pages 779-788]
• Arab Kermani, Mojtaba Integrated Optimization of Guidance and Control Parameters in a Dual Spin Flying Vehicle [Volume 24, Issue 5, 2017, Pages 2473-2489]
• Arabloo, F. Modeling the CO gas response of PEDOT:PSS/Fe(salen) thin film for a gas sensor [Volume 27, Issue 3, 2020, Pages 1227-1233]
• Arablu, M. An Eulerian-Lagrangian model to study the operation mechanism of Stirling pulse tube refrigerators [Volume 23, Issue 1, 2016, Pages 277-284]
• Arabnezhad, H. Experimental Study of Small and Medium Break LOCA in the TTL-2 Thermo-Hydraulic Test Loop and Its Modeling with RELAP5/MOD3.2 Code [Volume 17, Issue 6, 2010]
• Arabzadeh, E. Multi-period home health care routing and scheduling problem with the medical grouping of patients [Volume 30, Issue 5, 2023, Pages 1781-1795]
• A. Rahmati, Seyed Habib Developing simulation based optimization mechanism for a novel stochastic reliability centered maintenance problem [Volume 25, Issue 5, 2018, Pages 2788-2806]
• Aram, A. An assessment of data mining and bivariate statistical methods for landslide susceptibility mapping [Volume 29, Issue 3, 2022, Pages 1077-1094]
• Aram, Z. A simple chaotic model for development of HIV virus [Volume 28, Special issue on collective behavior of nonlinear dynamical networks, 2021, Pages 1643-1652]
• Arango-Serna, Martin Dario A multi-product multi-layer urban freight distribution problem solved using a hybrid metaheuristic procedure [(Articles in Press)]
• Arani, M. Smart microgrid educational laboratory: An integrated electric and communications infrastructure platform [Volume 29, Issue 5, 2022, Pages 2552-2565]
• Arashpour, M. Lean design management using a gamified system [Volume 26, Special Issue on: Socio-Cognitive Engineering, 2019, Pages 15-25]
• Aravind, J Green Corrosion Inhibition studies in mild steel using Mukia maderaspatana plant extracts [(Articles in Press)]
• Arazgaldi, R. Experimental and Numerical Investigation of Marine Propeller Cavitation [Volume 16, Issue 6, 2009]
• Ardakani, A. Laboratory investigation of geotextile position on CBR of clayey sand soil under freeze-thaw cycle [Volume 27, Issue 6, 2020, Pages 2808-2816]
• Ardakani, Alireza Cyclic and post-cyclic geocell pullout behavior in cohesionless soil [(Articles in Press)]
• Ardakanian, R. Multi Attribute Decision Making on Inter-Basin Water Transfer Projects [Volume 16, Issue 1, 2009]
• Ardeshir, A. Evaluation of Safety Risks in Construction Using Fuzzy Failure Mode and Effect Analysis (FFMEA) [Volume 23, Issue 6, 2016, Pages 2546-2556]
• Ardeshir, A. Using association rules to investigate causality patterns of safety-related incidents in the construction industry [Volume 29, Issue 2, 2022, Pages 929-939]
• Aref, Mohammad Reza A joint encryption-encoding scheme using QC-LDPC codes based on finite geometry [Volume 31, Issue 17, 2024, Pages 1504-1516]
• Aref, Mohammad Reza Cryptanalysis of full-round SFN Block Cipher a Lightweight Block Cipher, Targeting IoT Systems [(Articles in Press)]
• Aref, M. R. Modified cache template attack on AES [Volume 29, Issue 4, 2022, Pages 1949-1956]
• Aref, M.R. The KryptoKnight Family of Protocols: Evaluation and Enhancement [Volume 7, Issue 3, 2000]
• Aref, M.R. A New Approach for Coherent Radar Detection in K-Distributed Interference [Volume 5, Issue 1, 1998]
• Aref, M.R. Detection of a Band-Limited Signal Using an Orthonormal, Fully-Decimated Filter-Bank [Volume 14, Issue 6, 2007]
• Aref, M.R. GLR Detector for Coded Signals in Noise and Interference [Volume 15, Issue 2, 2008]
• Aref, M.R. The Linear Complexity of the Universal logic Sequences [Volume 2, Issue 1, 1995]
• Aref, M.Reza On the equivalency of reliability and security metrics for wireline networks [Volume 26, Issue 3, 2019, Pages 1749-1761]
• Arefmanesh ‎, Ali Effect of Position of a Square-Shaped Heat Source on the Buoyancy-Driven Heat Transfer in a Square Cavity Filled with Nanofluid [Volume 21, Issue 3, 2014, Pages 1129-1142]
• Arehpanahi, M. Optimization of magnetic devices using Surface Current Method (SCM) [Volume 24, Issue 3, 2017, Pages 1345-1352]
• Arehpanahi, Mehdi Optimal design of Interior Permanent Magnet Motor with wide flux weakening range [Volume 22, Issue 3, 2015, Pages 1045-1051]
• Arehpanahi, Mehdi Cogging torque reduction of Interior Permanent Magnet Synchronous Motor (IPMSM) [Volume 25, Issue 3, 2018, Pages 1471-1477]
• Arezoo, Behrooz Residual Stress and Surface Roughness Minimization in Laser Cutting of 304L Stainless Steel [(Articles in Press)]
• Arghavani, J. Experimental and numerical study on the effect of aluminum foil wrapping on penetration resistance of ceramic tiles [Volume 24, Issue 3, 2017, Pages 1126-1135]
• Arian-Nejad, M. Finite simple Field extensions [Volume 4, Issue 1, 1997, Pages 57-59]
• Arif, D. Cost effective indoor HVAC energy efficiency monitoring based on intelligent decision support system under fermatean fuzzy framework [Volume 30, Issue 6, 2023, Pages 2143-2161]
• Ariffin, A.K. Dynamic adaptive mesh refinement of Fluid-structure interaction using immersed boundary method with two-stage corrections [Volume 26, Issue 5, 2019, Pages 2827-2838]
• Arifin, N. M. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
• Arjang, F. A reliable implicit difference scheme for treatments of fourth-order fractional sub-diffusion equation [Volume 24, Issue 3, 2017, Pages 1100-1107]
• Arjmand, Masoud Development of a Joint Economic Lot Size Model with Stochastic Demand Within non-equal shipments [Volume 23, Issue 6, 2016, Pages 3026-3034]
• Arjmand, N. Sagittal range of motion of the thoracic spine using standing digital radiography: A throughout comparison with non-radiographic data reviewed from the literature [Volume 26, Issue 3, 2019, Pages 1307-1315]
• Arjmand, Navid Comparison of ten widely-use ergonomic risk assessment tools based on evaluations of various manual materials handling activities [(Articles in Press)]
• Arjmandi, N. CVD Synthesis of Small-Diameter Single-Walled Carbon Nanotubes on Silicon [Volume 16, Issue 1, 2009]
• Arjmandi, Nima Fabrication of a Solution-Processed IGZO/NiO P-N Diode [(Articles in Press)]
• Arjmandi, Reza Resilient approach toward urban development in lake catchments, case of Urmia Lake [Volume 23, Issue 4, 2016, Pages 1627-1632]
• Arjomand, Alireza Optimal operation of a divided-wall column with local operating condition changes [Volume 22, Issue 6, 2015, Pages 2358-2372]
• Arjomandi, K. Correlation Between Structural Performance Levels and Damage Indexes in Steel Frames Subjected to Earthquakes [Volume 16, Issue 2, 2009]
• Arkat, J. Hypercube queuing models in emergency service systems: A state-of-the-art review [Volume 26, Issue 2, 2019, Pages 909-931]
• Arkat, Jamal Course timetabling in medical universities given physicians' educational and clinical tasks [(Articles in Press)]
• Arkian, F. PM10 and CO dispersion modeling of emissions from four thermal power plants in Mashhad, Iran [Volume 27, Issue 5, 2020, Pages 2433-2442]
• Arman, H. Fuzzy mathematical models for maximizing satisfaction of contractors and clients by considering flexible start date of the project [Volume 29, Issue 3, 2022, Pages 1729-1741]
• Armstrong, T.P. Electroestatic Charge in Insulating Dust Grains in a Plasma [Volume 4, Issue 4, 1998]
• Arnelli, Arnelli Enhancement of electrical conductivity of bismuth oxide/activated carbon composite [Volume 29, Issue 6, 2022, Pages 3119-3131]
• Arora, Rishu Prioritized averaging/geometric aggregation operators under the intuitionistic fuzzy soft set environment [Volume 25, Issue 1, 2018, Pages 466-482]
• Arora, Rishu A robust aggregation operators for multi-criteria decision-making with intuitionistic fuzzy soft set environment [Volume 25, Issue 2, 2018, Pages 931-942]
• Arsalani, N. An experimental investigation of the effect of using non-Newtonian nanofluid-graphene oxide/aqueous solution of sodium carboxymethyl cellulose-on the performance of direct absorption solar collector [Volume 28, Issue 3, 2021, Pages 1284-1297]
• Arshad, Asma Improved CEM-RBS Control Charts for Monitoring the Process Mean using Ranked-Based Sampling Designs [(Articles in Press)]
• Arshadi Khamseh, A. Solving a new bi-objective model for relief logistics in a humanitarian supply chain by bi-objective meta-heuristic algorithms [Volume 28, Issue 5, 2021, Pages 2948-2971]
• Arshadi Khamseh, Alireza Toward a sustainable economic production quantity model employing triple bottom line strategy: Uncertain multi-objective optimization with lost sales and full back-order [(Articles in Press)]
• Arshadi Khamseh, A. R. Fuzzy Development of Multivariate Variable Control Charts Using the Fuzzy Likelihood Ratio Test [Volume 17, Issue 2, 2010]
• Arshah, R. A. Acceptance of online social networks as technology-based education tools among higher institution students: Structural equation modeling approach [Volume 26, Special Issue on: Socio-Cognitive Engineering, 2019, Pages 136-144]
• Arslan, A. Time series prediction with a hybrid system formed by artificial neural network and cognitive development optimization algorithm [Volume 26, Issue 2, 2019, Pages 942-958]
• Arslan, M.H. Effect of Internal and External Shear Wall Location on Strengthening Weak RC Frames [Volume 17, Issue 4, 2010]
• Arslan, Musa Hakan NEURAL NETWORK PREDICTION OF THE ULTIMATE CAPACITY OF SHEAR STUD CONNECTORS ON COMPOSITE BEAMS WITH PROFILED STEEL SHEETING [Volume 20, Issue 4, 2013, Pages 1101-1113]
• Arslan, S. Design and optimization of tubular linear permanent-magnet generator with performance improvement using response surface methodology and multi-objective genetic algorithm [Volume 27, Issue 6, 2020, Pages 3053-3065]
• Arslan, S. Polygonal tubular linear permanent magnet generator analysis and experimental test [Volume 29, Issue 1, 2022, Pages 168-182]
• Arsoy, Sami Reliability of Soil Water Content Measurements by Calcium Carbide Gas Pressure Method for Small Specimens [Volume 21, Issue 6, 2014, Pages 1762-1772]
• Arvani, Maedeh Graphene oxide/SnO2 Nanocomposite as Sensing Material for Breathalyzers: Selective Detection of Ethanol in the presence of Automotive CO and Hydrocarbons Emissions [Volume 24, Issue 6, 2017, Pages 3033-3040]
• Arvin, Mohammad Reza Numerical evaluation of geocell-reinforced flexible pavements under traffic loads [Volume 25, Issue 2, 2018, Pages 493-504]
• Aryanasab, Fezzeh A Simple Approach to the Synthesis of 3-Substituted Rhodanines and Thiazolidine-2,4-diones [Volume 20, Issue 6, 2013, Pages 1833-1838]
• Arzani, H. Adaptive node moving refinement in discrete least squares meshless method using charged system search [Volume 21, Issue 5, 2014, Pages 1529-1538]
• Arzani, H. Optimum two-dimensional crack modeling in discrete least-squares meshless method by charged system search algorithm [Volume 24, Issue 1, 2017, Pages 143-152]
• Asad, R. A Novel Practical Fair Nodal Price for DC Microgrids and Distribution Systems [Volume 21, Issue 6, 2014, Pages 2232-2242]
• Asadi, B. Computational Simulation of Marangoni Convection Under Microgravity Condition [Volume 16, Issue 6, 2009]
• Asadi, H. A new nondominated sorting genetic algorithm based to the regression line For fuzzy traffic signal optimization problem [Volume 25, Issue 3, 2018, Pages 1712-1723]
• Asadi, Hossein Impact of Stripe Unit Size on Performance and Endurance of SSD-Based RAID Arrays [Volume 20, Issue 6, 2013, Pages 1978-1998]
• Asadi, P. Life-cycle cost analysis of RC bridges subjected to multiple hazards [Volume 28, Issue 2, 2021, Pages 629-644]
• AsadiDalir, Mohammad Nonlinear free vibration analysis of clamped circular Fiber Metal Laminated plate [Volume 22, Issue 3, 2015, Pages 813-824]
• Asadi Dalir, M. Exact mathematical solution for nonlinear free transverse vibrations of beams [Volume 27, Issue 3, 2020, Pages 1290-1301]
• Asadi Dereshgi, H. A Novel Inductive Tactile Probe Design for Lump Detection in Soft Tissue Phantoms [Volume 27, Issue 6, 2020, Pages 3118-3127]
• Asadi-Gangraj, E. Dynamic virtual cell formation considering new product development [Volume 27, Issue 4, 2020, Pages 2093-2107]
• Asadi-Gangraj, E. Flexible flow shop scheduling problem to minimize makespan with renewable resources [Volume 28, Issue 3, 2021, Pages 1853-1870]
• Asadi-Gangraj, E. Robust bi-objective operating rooms scheduling problem regarding the shared resources [Volume 30, Issue 6, 2023, Pages 2203-2221]
• Asadi-Gangraj, Ebrahim Lagrangian relaxation approach to minimize makespan for hybrid flow shop scheduling problem with unrelated parallel machines [Volume 25, Issue 6, 2018, Pages 3765-3775]
• Asadi Ghoozhdi, H. Effect of damped outriggers arrangement on the seismic response of high-rise steel structures [Volume 27, Issue 3, 2020, Pages 1075-1090]
• Asadi Ghyasvand, A. Evaluation of effect of SSSC stabilizer in different control channels on sub-synchronous resonance oscillations [Volume 25, Issue 3, 2018, Pages 1492-1506]
• Asadkhani, J. Extended economic production quantity models with preventive maintenance [Volume 27, Issue 6, 2020, Pages 3253-3264]
• Asadkhani, J. Economic order quantity for imperfect quality items under inspection errors, batch replacement and multiple sales of returned items [Volume 28, Issue 5, 2021, Pages 2890-2909]
• Asadollahi, M. Experimental and numerical comparison of flow and scour patterns around a single and triple bridge piers located at a 180-degree sharp bend [Volume 28, Issue 1, 2021, Pages 1-14]
• Asadollahzadeh Shamkhal, F. A methodology for examining the chaotic behavior of CoP signal during quiet standing based on empirical mode decomposition method [Volume 28, Special issue on collective behavior of nonlinear dynamical networks, 2021, Pages 1560-1569]
• Asadzadeh, Sh. Designing a risk-adjusted CUSUM control chart based on DEA and NSGA-II approaches A case study in healthcare: Cardiovascular patients [Volume 29, Issue 5, 2022, Pages 2696-2709]
• Asako, Y. Unsteady Laminar Natural Convection,Radiation and Conduction Within an Enclosure With an Obstruction [Volume 1, Issue 1, 1994]
• Asbafkan, A. A DC power system stabilizer based on passivity-oriented DC bus impedance shaping [Volume 29, Issue 4, 2022, Pages 2029-2039]
• Aseesh Sai, Adella Mixed convection flow of Magnetohydrodynamic Prandtl nanofluid containing gyrotactic microorganisms: Multi-layer neural network model [(Articles in Press)]
• Asgari, N. Multiport Memory for High-Speed Interprocessor Communication in MultiCom [Volume 8, Issue 4, 2001]
• Asgari, O. Numerical Investigation of Fluid Flow and Heat Transfer Characteristics in Parallel Flow Single Layer Microchannels [Volume 16, Issue 4, 2009]
• Asgari, Sh. A dual-stator machine with diametrically magnetized PM: Analytical air-gap flux calculation, efficiency optimization, and comparison with conventional dual-stator machines [Volume 29, Issue 1, 2022, Pages 208-216]
• Asgari, Sirous Aging Behavior and Microstructure Evolution of a Cold-Drawn Ni-Co Superalloy [Volume 22, Issue 1, 2015, Pages 281-285]
• Asgari, Zhila One-pot multi-component synthesis of 1,2,4,5-tetrasubstituted imidazoles using sulfonic acid-functionalized pyridinium chloride as an efficient and recyclable catalyst [Volume 22, Issue 6, 2015, Pages 2254-2261]
• Asgarian Dehkordi, H. A novel approach for vehicle identification based on image registration and deep learning [Volume 31, Issue 5, 2024, Pages 431-440]
• Asgarian Dehkordi, R. Vehicle speed and dimensions estimation using on-road cameras by identifying popular vehicles [Volume 29, Issue 5, 2022, Pages 2515-2525]
• Asgarian Dehkordi, R. A novel approach for vehicle identification based on image registration and deep learning [Volume 31, Issue 5, 2024, Pages 431-440]
• Asgari Marnani, Jafar Structural health monitoring of concrete arch dams using the wavelet transform and modal assurance criterion methods [(Articles in Press)]
• Asgarshamsi, A. Analytical Solution for Large amplitude Vibrations of Micro-beams Actuated by an Electro-static Force [Volume 20, Issue 5, 2013, Pages 1499-1507]
• Asgarshamsi, A. Multi-objective optimum stator and rotor stagger angle distributions of an axial turbine stage [Volume 22, Issue 2, 2015, Pages 448-458]
• Asghar, Saleem Heat transfer analysis in peristaltic slip flow with Hall and ion-slip currents [Volume 23, Issue 6, 2016, Pages 2771-2783]
• Asghar, Saleem Importance of activation energy and heat source on nanoliquid flow with gyrotactic microorganisms [Volume 27, Issue 6, 2020, Pages 3381-3389]
• Asghar, Saleem Modeling for radiated Marangoni convection flow of magneto-nanoliquid subject to activation energy and chemical reaction [Volume 27, Issue 6, 2020, Pages 3390-3398]
• Asghar, Z. Critical investigation of thermally developing nanofluid flow within slippery tubes and channels: An extended Graetz-Nusselt problem with longitudinal conduction and power-law nanofluid [Volume 29, Issue 6, 2022, Pages 3582-3590]
• AsgharAli, S. Study of non-catalyzed molecular reaction of reducing sugars [Volume 16, Issue 1, 2009]
• Asghari, A. Evaluation of sensitivity of CBFs for types of Bracing and story numbers [Volume 24, Issue 1, 2017, Pages 40-52]
• Asghari, A.-H. Effects of particle shape and size distribution on particle size-dependent flow strengthening in metal matrix composites [Volume 24, Issue 3, 2017, Pages 1091-1099]
• Asghari, H. Parameter converting method for bifurcation analysis of nonlinear dynamical systems [Volume 27, Issue 1, 2020, Pages 310-329]
• Asghari, Mohsen A Design Approach for Coaxial Magnetic Gear and Determination of Torque Capability [Volume 25, Issue 2, 2018, Pages 772-789]
• Asghari-Paskiabi, Farnoush Fusarium oxysporum, a bio-Factory for Nano Selenium Compounds: Synthesis and Characterization [Volume 25, Issue 3, 2018, Pages 1857-1863]
• Asghari Rad, H. Optimal allocation of plug-in electric vehicle parking lots for maximum serviceability and profit in the coupled distribution and transportation networks [Volume 31, Issue 14, 2024, Pages 1178-1196]
• Asghari Shivaee, Hossein Structural and Magnetic Study of Active Screen Plasma Nitrided Fe73:5Si13:5B9Nb3Cu1 and Fe77Si11B9Nb2:4Cu0:6 Ribbons [Volume 17, Issue 1, 2010]
• Asghari Shivaee, Hossein Ultraviolet and Visible Upconversion Emissions in Er3+-Yb3+ Doped Titanium Dioxide Nanopowder under the 980 nm Laser Diode Excitation [Volume 24, Issue 6, 2017, Pages 3500-3504]
• Asghari Shivaee, Hossein The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
• Asgharpour-Alamdari, H. Design optimization of coreless stator axial flux-switching motor [Volume 30, Issue 3, 2023, Pages 1127-1138]
• Asgharzadeh, Seyed Mohammad Rheological master curves for modified asphalt binders [Volume 20, Issue 6, 2013, Pages 1654-1661]
• Asgharzadeh-Alvar, Amin Investigating the attentional effect and stimulus selectivity at the brainstem during auditory selective attention to dichotically presented /ba/ and /da/ stimuli [(Articles in Press)]
• A. Shaaban, Abeer Mathematical Model and Stability Analysis for Dusty-hybrid Nanofluid over a Curved Surface with Cattaneo–Christov Heat Flux and Fourier law with Slip Effect [(Articles in Press)]
• Ashjaee, M. Experimental estimation heat flux and heat transfer coefficient by using inverse methods [Volume 23, Issue 4, 2016, Pages 1777-1786]
• Ashjaee, M. Tuning the implementable structures of fractional-order PID controllers for control of FOPDT processes [Volume 29, Issue 2, 2022, Pages 660-675]
• Ashjari, M.A. Prediction of Hydraulic Efficiency of Primary Rectangular Settling Tanks Using the Non-linear k -e Turbulence Model [Volume 17, Issue 3, 2010]
• Ashoor, M. Introducing a New Definition Towards Clinical Detection of Microvascular Changes Using Diffusion and Perfusion MRI [Volume 12, Issue 1, 2005]
• Ashoor, M. Estimation of Mean Radius, Length and Density of Microvasculature Using Diffusion and Perfusion MRI [Volume 13, Issue 4, 2006]
• Ashouri-Zadeh, A. Force Ripple Reduction Methods for Tubular Permanent Magnet Linear Machines [(Articles in Press)]
• Ashourloo, D. Wheat yield prediction based on Sentinel-2, regression, and machine learning models in Hamedan, Iran [Volume 29, Issue 6, 2022, Pages 3230-3243]
• Ashraf, M. Study of thermally developed flow of viscous fluid over a porous stretching surface contacting gyrotatic microorganisms using buongiorno model [Volume 28, Issue 3, 2021, Pages 1926-1938]
• Ashraf, M. Simulation analysis of mass and heat transfer attributes in nanoparticle flow subject to Darcy-Forchheimer medium [Volume 29, Issue 4, 2022, Pages 1828-1837]
• Ashraf, M. Impact of viscous dissipation on MHD darcy-forchheimer nanoliquid flow comprising gyrotactic microorganisms past a nonlinear extending surface [Volume 30, Issue 6, 2023, Pages 2235-2244]
• Ashrafi, S.M. Prediction of meteorological and hydrological phenomena in different climatic scenarios in the Karkheh watershed (southwest of Iran) [Volume 27, Issue 4, 2020, Pages 1814-1825]
• Ashrafizadeh, A. Direct Design of Branched Ducts [Volume 16, Issue 2, 2009]
• Ashrafzadeh, Farah Poincaré Section based Biomarkers of Hemispheric Asymmetry, applied to Autism Spectrum Disorder [Volume 24, Issue 6, 2017, Pages 3257-3267]
• Ashtiani, F. Performance Comparison of Admission Control Policies for New Calls in Soft-Handoff Regions for CDMA Cellular Networks [Volume 11, Issue 3, 2004]
• Ashtiani, M. A dynamic balanced level generator for video games based on deep convolutional generative adversarial networks [Volume 28, Special issue on collective behavior of nonlinear dynamical networks, 2021, Pages 1497-1514]
• Ashtiani, M. Visual creativity through concept combination using quantum cognitive models [Volume 31, Issue 2, 2024, Pages 118-135]
• Ashtiani, M. A self-adaptive approach to job scheduling in cloud computing environments [Volume 31, Issue 5, 2024, Pages 373-387]
• Ashtiani, M.M. Synthesis of a new T-shaped heterobinuclear Pt0-AuI complex [(t-Bu3P)2PtAu(PPh3)]BF4 from trinuclear gold cluster complex [(PPh3)Au]3(-O)BF4 [Volume 23, Issue 3, 2016, Pages 1089-1094]
• Ashuri, E. Development of a Continuous Kinetic Model for Catalytic Hydrodenitrogenation of Bitumen [Volume 14, Issue 2, 2007]
• Asif Sha, A. Experimental Assessment of a Continuously Operating Solar Vapour Adsorption Cooling System Operated with Composite adsorbent/ethanol as working pair [(Articles in Press)]
• Asil Gharebaghi, Saeed Modal Analysis of Two-Dimensional Beams Using Parallel Finite Element Method [Volume 24, Issue 6, 2017, Pages 2762-2775]
• Asim, M. An integrated approach of quality for polymer composite manufacturing validated and optimized through Taguchi method [Volume 24, Issue 4, 2017, Pages 1985-1995]
• Askari, Ehsan Ali A capacitated bike sharing location-allocation problem under demand uncertainty using sample average approximation: A greedy Genetic-Particle Swarm Optimization algorithm [Volume 24, Issue 5, 2017, Pages 2567-2580]
• Askari, F. Eects of Canard Position on Wing Surface Pressure [Volume 17, Issue 2, 2010]
• Askari, F. Roughness and Turbulence Effects on the Aerodynamic Efficiency of a Wind Turbine Blade Section [Volume 23, Issue 3, 2016, Pages 927-941]
• Askari, M. A New Colloidal Technique for the Synthesis of Lead Sulfide Nanoparticles [Volume 10, Issue 3, 2003]
• Askari, Maryam Constructing a Sensitive Control Chart to Monitor Process Mean using Optimal Filter: Time-Frequency Analysis Approach [(Articles in Press)]
• Askari, R. Determination of cadmium in water and environmental samples by inductively coupled plasma atomic emission spectrometry after solid phase extraction using thiosemicarbazide derivative on alumina [Volume 21, Issue 6, 2014, Pages 2012-2020]
• Askari, R. Two- and three-dimensional numerical simulations of supersonic ramped inlet [Volume 25, Issue 4, 2018, Pages 2198-2207]
• Aslam, M. Bayesian analysis of type-I right censored data using the 3-component mixture of Burr distributions [Volume 23, Issue 5, 2016, Pages 2374-2390]
• Aslam, M. Bayesian Analysis of the Rayleigh Paired Comparison Model under Loss Functions using Informative Prior [Volume 25, Issue 2, 2018, Pages 983-990]
• Aslam, M. Reliability analysis of 3-component mixture of distributions [Volume 25, Issue 3, 2018, Pages 1768-1781]
• Aslam, M. Bayesian analysis of heterogeneous doubly censored lifetime data using the 3-component mixture of Rayleigh distributions: A Monte Carlo simulation study [Volume 26, Issue 3, 2019, Pages 1789-1808]
• Aslam, M. On designing CUSUM charts using ratio-type estimators for monitoring the location of normal processes [Volume 27, Issue 3, 2020, Pages 1593-1605]
• Aslam, M. On the Bayesian analysis of two-component mixture of transmuted Weibull distribution [Volume 28, Issue 3, 2021, Pages 1711-1735]
• Aslam, M. Determination of product acceptance for two suppliers with linear profiles [Volume 28, Issue 4, 2021, Pages 2333-2341]
• Aslam, M. A new nonparametric composite exponentially weighted moving average sign control chart [Volume 29, Issue 1, 2022, Pages 290-302]
• Aslam, M. Percentile bootstrap control chart for monitoring process variability under non-normal processes [Volume 31, Issue 15, 2024, Pages 1282-1292]
• Aslam, M. Product acceptance determination based on EWMA yield index using repetitive and MDS sampling schemes [Volume 29, Issue 4, 2022, Pages 2241-2251]
• Aslam, Muhammad A Modified Group Chain Sampling Plan for lifetime following Kumaraswamy Generalized Power Weibull Distribution with Minimum Angle Approach [(Articles in Press)]
• Aslam, Muhammad Moving Average Control Charts using Uncertain Information for Various Sampling Schemes [(Articles in Press)]
• Aslani, F. Preloaded High-Temperature Constitutive Models and Relationships for Concrete [Volume 17, Issue 1, 2010]
• Aslantas, K. Powder metallurgy Mg-Sn alloys: Production and characterization [Volume 27, Issue 3, 2020, Pages 1255-1265]
• Asleshirin, s. Experimental investigation of the effect of Al2O3 nanoparticles with spherical and rod-shaped morphologies on the thermophysical properties of ionic nanofluids [Volume 28, Issue 3, 2021, Pages 1452-1463]
• Asmari Saadabad, N. Optimized design of adaptable vibrations suppressors in semi-active control of circular plate vibrations [Volume 26, Issue 3, 2019, Pages 1358-1377]
• Asnafi, A. Some New Robust Pseudo Forward and Rotation Gaits for the Snakeboard [Volume 15, Issue 5, 2008]
• Asrari, H. Robust state-feedback controller for linear parameter-varying systems with time-invariant uncertainties [Volume 30, Issue 3, 2023, Pages 1148-1157]
• Assa, F. Templated nanostructure silica membrane versus template-free one: Synthesis, characterization, and performance for hydrogen separation [Volume 26, Issue 3, 2019, Pages 1505-1515]
• Assareh, H. Bayesian Multiple Change Point Estimation of Poisson Rates in Control Charts [Volume 23, Issue 1, 2016, Pages 316-329]
• Assarzadeh, S. Mathematical modeling and optimization of the Electro-Discharge Machining (EDM) parameters on tungsten carbide composite: Combining response surface methodology and desirability function technique [Volume 22, Issue 2, 2015, Pages 539-560]
• Assefa, Beakal Gizachew Sigatoka and Xanthomonas Banana Leaf Disease Detection Via Transfer Learning [(Articles in Press)]
• Assempour, A. Multi-objective optimum stator and rotor stagger angle distributions of an axial turbine stage [Volume 22, Issue 2, 2015, Pages 448-458]
• Asteraki, Amir Arsalan Design and control of a dual-function device with simultaneous DVR and FCL capability [(Articles in Press)]
• Asthana, Rishi Viscoelastic potential flow analysis of stability of a cylindrical jet [Volume 21, Issue 3, 2014, Pages 578-586]
• Astuti, Astuti The Influence of Carbon Quantum Dots Addition on the Photoluminescence Performance of ZnO Nanoparticles [(Articles in Press)]
• Astuti, Y. Enhancement of electrical conductivity of bismuth oxide/activated carbon composite [Volume 29, Issue 6, 2022, Pages 3119-3131]
• Asvar, Fariba Predicting potential of controlled blasting-induced liquefaction using neural networks and neuro -fuzzy system [Volume 25, Issue 2, 2018, Pages 617-631]
• Atabakhshian, V. Pulsating flow induced parametric instabilities of a smart embedded micro-shell based on nonlocal piezoelasticity theory [Volume 27, Issue 2, 2020, Pages 730-744]
• ATAEE, OMOLBANIN Predicting shear wave velocity of soil using multiple linear regression analysis and artificial neural networks [Volume 25, Issue 4, 2018, Pages 1943-1955]
• Ataei, M. M. An adaptive impedance control algorithm; Application in exoskeleton robot [Volume 22, Issue 2, 2015, Pages 519-529]
• Ataei, Mohmmad An Integrated Decision Support System for Dam Site Selection [Volume 22, Issue 2, 2015, Pages 319-330]
• Ataei, Sh. Dynamic load testing of a railway masonry arch bridge: A case study of Babak Bridge [Volume 24, Issue 4, 2017, Pages 1834-1842]
• Ataeian, Sh. Synchronized timetables for bus rapid transit networks in small and large cities [Volume 28, Issue 1, 2021, Pages 477-491]
• Atagun, A. O. Decompositions of soft sets and soft matrices with applications in group decision making [Volume 31, Issue 6, 2024, Pages 518-534]
• A.Taherpour, A. Theoretical studies on photo-induced electron transfer process on [Thioridazine].C60 nano-complex; a first principle DFT and TD-DFT [Volume 28, Issue 3, 2021, Pages 1343-1352]
• Atai, Mohammad Facile Template-less Fabrication of ZnO Nanostructures;On the Consideration of Several Parameters [Volume 23, Issue 6, 2016, Pages 3163-3174]
• Ataie-Ashtiani, B. Free Water Surface Oscillations in a Closed Rectangular Basin with Internal Barriers [Volume 15, Issue 3, 2008]
• Atakan Akar, M. Investigation on flow characteristics of generic car body with different boundary conditions [Volume 31, Issue 13, 2024, Pages 1077-1089]
• Atangana, Abdon New groundwater flow equation with its exact solution [Volume 23, Issue 4, 2016, Pages 1837-1843]
• Atangana, Abdon Numerical solutions of Fourier's law involving fractional derivatives with bi-order [Volume 25, Issue 4, 2018, Pages 2175-2185]
• Atarod, M. Classification of Mean Arterial Pressure Regimes in ICU Using a Model-Based Support Vector Machine: Acute Hypotensive, Critical and Survival Episodes [Volume 17, Issue 4, 2010]
• Atashgar, K. Monitoring multivariate environments using articial neural network approach: An overview [Volume 22, Issue 6, 2015, Pages 2527-2547]
• Ates, H. Effect of deep sub-zero treatment on mechanical properties of AA5XXX aluminum plates adjoined by MIG welding technique [Volume 24, Issue 4, 2017, Pages 1950-1957]
• ATES, Hakan ESTIMATION OF MECHANICAL PROPERTIES OF WELDED S355J2+N STEEL VIA THE ARTIFICIAL NEURAL NETWORK [Volume 23, Issue 2, 2016, Pages 609-617]
• Athar Farid, Hafiz Muhammad Innovative q-Rung Orthopair Fuzzy Prioritized Interactive Aggregation Operators to Evaluate Efficient Autonomous Vehicles for Freight Transportation [(Articles in Press)]
• Atif, H. M. Numerical study of slip and Magnetohydrodynamics (MHD) in calendering process using non-Newtonian fluid [(Articles in Press)]
• Atif, S. M. Effect of MHD on Casson fluid with Arrhenius activation energy and variable properties [Volume 29, Issue 6, 2022, Pages 3570-3581]
• Atif, S. M. MHD Carreau nanofluid with Arrhenius activation energy in a porous medium [Volume 29, Issue 6, 2022, Pages 3591-3602]
• Atif, S.M. Effect of thermal radiation on MHD micropolar Carreau nanofluid with viscous dissipation, Joule heating, and internal heating [Volume 26, Issue 6, 2019, Pages 3875-3888]
• Atighehchian, Arezoo Optimizing a multi-objective master surgical scheduling under probabilistic length of stay and demand uncertainty [(Articles in Press)]
• Atri, H.R. Analysis of laminated composite plates based on THB-RKPM method using the higher order shear deformation plate theory [Volume 26, Issue 4: Special Issue Dedicated to Professor Abolhassan Vafai, 2019, Pages 2057-2078]
• Atrian, A. Rolling contact fatigue analysis of rails under the in uence of residual stresses induced by manufacturing [Volume 26, Issue 3, 2019, Pages 1427-1437]
• Attar, N. Constructing automated test oracle for low observable software [Volume 27, Issue 3, 2020, Pages 1333-1351]
• Attaran, Abdol Mohammad Green synthesis of silver nanoparticles using pollen extract of rose flower and their antibacterial activity [Volume 22, Issue 6, 2015, Pages 2736-2744]
• Attaran, N. Substituted pyrrolizine-bridged bipyrroles synthesis via ring annulation under green conditions [Volume 28, Issue 3, 2021, Pages 1414-1419]
• Attari, A.R. Application of the Transmission Line Matrix Method to the Shielding Effectiveness Analysis of Metallic Enclosures [Volume 9, Issue 4, 2002]
• Attari, N. K. A. Numerical investigation of Cover Plate in RCS connections [Volume 27, Issue 1, 2020, Pages 10-24]
• Attarnejad, R. Seismic performance of EBFs equipped with an innovative shape memory alloy damper [Volume 27, Issue 5, 2020, Pages 2316-2325]
• Attarnejad, R. Soil-structure interaction response considering drift analysis due to three orthogonal components of near-field ground motions [Volume 29, Issue 6, 2022, Pages 2953-2967]
• Attarnejad, Reza Dispersion of surface waves in a transversely isotropic half-space underlying a liquid layer [Volume 23, Issue 6, 2016, Pages 2469-2477]
• Atuanyaa, C. U . ‎ Effects of Breadfruit Seed Hull Ash Particles on Microstructures and Properties of Recycled Low Density Polyethylene/Breadfruit Seed Hull Ash Composites [Volume 21, Issue 3, 2014, Pages 792-802]
• Auchar Zardari, M. Long-term flexural behavior of reinforced baked clay beams [Volume 24, Issue 3, 2017, Pages 877-883]
• Auchar Zardari, M. Reinforcement-dependent long-term deflection response of baked clay beams [Volume 26, Issue 5, 2019, Pages 2723-2730]
• Auchar Zardari, M. Mechanical properties of soft tailings from different depths of a Swedish tailings dam: Results from triaxial tests [Volume 27, Issue 3, 2020, Pages 1066-1074]
• Avakh Darestani, S. Optimizing a fuzzy multi-objective closed-loop supply chain model considering financial resources using meta-heuristic [Volume 30, Issue 4, 2023, Pages 1480-1497]
• Avara, A. Molecular dynamics simulations of sessile and pendant droplets' shape on inclined and curved surfaces [Volume 25, Issue 6: Special Issue Dedicated to Professor Goodarz Ahmadi, 2018, Pages 3183-3196]
• Avaz Pour, P. Enhancing power system transient stability using optimal unified power flow controller based on Lyapunov control strategy [Volume 24, Issue 3, 2017, Pages 1458-1466]
• Avci, E. Effect of cement grain size on the geotechnical properties of stabilized clay [Volume 26, Issue 6, 2019, Pages 3196-3206]
• AVCI, E. The effect of different curing temperatures on engineering properties of chemically grouted sands [Volume 27, Issue 3, 2020, Pages 1144-1161]
• Awad, A.R. Development of a Simplified Procedure for Routeing Solid Waste Collection [Volume 8, Issue 1, 2001]
• Awais, M. Mixed-convection boundary-layer flow of Sisko fluid along a stretching cylinder in a thermally stratied medium [Volume 23, Issue 6, 2016, Pages 2587-2594]
• Awais, M. Rheology of Burgers' model with Cattaneo-Christov heat flux in the presence of heat source/sink and magnetic field [Volume 26, Issue 1, 2019, Pages 323-330]
• Awais, M. New Shewhart-EWMA and Shewhart-CUSUM control charts for monitoring process mean [Volume 26, Issue 6, 2019, Pages 3796-3818]
• Awais, M. Deposition of anti-stick coatings to prevent hydrocarbon buildup on truck engines [Volume 27, Issue 5, 2020, Pages 2489-2497]
• Awasthi, Mukesh Kumar Viscoelastic potential flow analysis of stability of a cylindrical jet [Volume 21, Issue 3, 2014, Pages 578-586]
• Awrejcewicz, Jan Collective dynamics of a full heterogeneous network of neurons: experimental validation [(Articles in Press)]
• Ayar, Arif Toxic Effects of Chronic Feeding with Food Azo Dyes on Drosophila melanogaster Oregon R [Volume 24, Issue 6, 2017, Pages 3081-3086]
• Ayati‎, Esmaeil Road Safety Performance Evaluation and Policy Making by Data Envelopment Analysis: a Case Study of Provincial Data in Iran [Volume 21, Issue 5, 2014, Pages 1515-1528]
• Ayatollahi, M. Mode III fracture analysis of a non-homogeneous layer bonded to an elastic half-plane weakened by multiple interface cracks [Volume 25, Issue 5, 2018, Pages 2570-2581]
• Ayatollahi, Shahab Water/oil emulsion and asphaltene instability in different formations during low-salinity waterflooding: an experimental study [(Articles in Press)]
• Aydan, Ö. Discrete Finite Element Method for Analysis of Masonry and Rock Structure [Volume 6, Issue 3, 1999]
• Aydin, A. An experimental study of the seismic behavior of infilled RC frames with opening [Volume 24, Issue 5, 2017, Pages 2271-2282]
• Aydin, Abdulkadir Cuneyt Fire Performance of Steel Profiles Covered with Self Compacting Concrete [(Articles in Press)]
• Aydin, A. C. The shear and flexural behavior of cold-formed steel composite I and U beams [Volume 28, Issue 4, 2021, Pages 2119-2132]
• Aydin, A. C. Effect of hydrochloric acid corrosion and CFRP coating on the buckling behavior of cylindrical shells under external pressure [Volume 29, Issue 6, 2022, Pages 2886-2901]
• AYTAC, Ayse INVESTIGATION OF THE EFFECTS OF CARBONIC AGENT AND NANOCLAY ON THE PROPERTIES OF THE POLYLACTIC ACID BASED NANOCOMPOSITES [Volume 24, Issue 6, 2017, Pages 3074-3080]
• Ayubirad, Mohammad sadegh Comparison of artificial neural network and coupled simulated annealing based least square support vector regression models for prediction of compressive strength of high-performance concrete [Volume 24, Issue 2, 2017, Pages 487-496]
• Ayubi Rad, Mostafa Comparison of artificial neural network and coupled simulated annealing based least square support vector regression models for prediction of compressive strength of high-performance concrete [Volume 24, Issue 2, 2017, Pages 487-496]
• Ayyildiz, E. Humanitarian relief supply chain performance evaluation by a SCOR based Trapezoidal type-2 fuzzy multi-criteria decision making methodology: An application to Turkey [Volume 29, Issue 4, 2022, Pages 2069-2083]
• Ayyoubzadeh, Behnam A reactive approach for flexible job shop scheduling problem with tardiness penalty under uncertainty [(Articles in Press)]
• Ayyubi, J. Flexural retrofitting of the damaged reinforced concrete beams by using HPFRCC [Volume 27, Issue 6, 2020, Pages 2680-2689]
• Azadbeh, Maziyar Effects of in-situ formed TiB whiskers on microstructure and mechanical properties of spark plasma sintered Ti–B4C and Ti–TiB2 composites [Volume 25, Issue 2, 2018, Pages 762-771]
• Azadeh, M. A. Credibility-Based Fuzzy Mathematical Programming for Bi-Objective Capacitated Partial Facility Interdiction with Fortification and Demand Outsourcing Model [Volume 24, Issue 2, 2017, Pages 778-793]
• Azadehfar, E. Numerical study of conjugate heat transfer in laminar and turbulent nano fluid flow in double pipe heat  exchangers [Volume 23, Issue 5, 2016, Pages 2211-2219]
• Azad Farsani, E. An incentive-based policy on minimization of GHG emissions and loss using adaptive group search multi-objective optimization algorithm [Volume 29, Issue 1, 2022, Pages 230-246]
• Azadi, M Group classification of the time-fractional Kaup-Kupershmidt equation [Volume 24, Issue 1, 2017, Pages 302-307]
• Azadi, M. Multi-Input Multi-Output Direct Adaptive Control for a Distributed Parameter Flexible Rotating Arm [Volume 15, Issue 1, 2008]
• Azadi, M. The effect of freeze-thaw cycles on mechanical properties of fine-grained soil modified by cement and nanocement [Volume 29, Issue 6, 2022, Pages 2940-2952]
• Azadi, R. Synthesis of a new porous Graphene Oxide Framework (GOF) for high-performance ultrasonic-assisted removal of cadmium and lead ions from aqueous solution [Volume 30, Issue 6, 2023, Pages 2029-2042]
• Azadi, S. Parameter Estimation of Vehicle Handling Model Using Genetic Algorithm [Volume 11, Issue 1, 2004]
• Azadi, S. Adaptive Decoupling for Open Chain Planar Robots [Volume 17, Issue 5, 2010]
• Azadi Hematabadi, Ahmad A New Solution Approach for Supply Function Equilibrium-based Bidding Strategy in Electricity Markets [Volume 24, Issue 6, 2017, Pages 3231-3246]
• Azadi Moghaddam, M. Simultaneous Optimization of Joint Edge Geometry and Process Parameters in Gas Metal Arc Welding Using Integrated ANN - PSO Approach [Volume 24, Issue 1, 2017, Pages 260-273]
• Azadi Moghaddam, M. Modeling and optimization of the electrical discharge machining process based on a combined artificial neural network and particle swarm optimization algorithm [Volume 27, Issue 3, 2020, Pages 1206-1217]
• Azadi Moghaddam, M. Comparative modeling of abrasive waterjet machining process based on OA-Taguchi and D-optimal approach and optimization using simulated annealing algorithm [Volume 29, Issue 3, 2022, Pages 1276-1287]
• Azadi Moghaddam, M. Application of simulated annealing algorithm for multi-criteria operation planning in flexible manufacturing systems [Volume 30, Issue 5, 2023, Pages 1535-1547]
• Azadi Moghaddam, Masoud The Use of Taguchi Method with Grey Relational Analysis to optimize the EDM Process Parameters with Multiple Quality Characteristics [Volume 22, Issue 2, 2015, Pages 530-538]
• Azadvar, N. Numerical investigation of Cover Plate in RCS connections [Volume 27, Issue 1, 2020, Pages 10-24]
• Azam, M. Determination of product acceptance for two suppliers with linear profiles [Volume 28, Issue 4, 2021, Pages 2333-2341]
• Azam, M. Product acceptance determination based on EWMA yield index using repetitive and MDS sampling schemes [Volume 29, Issue 4, 2022, Pages 2241-2251]
• Azami Ghadikolayi, Milad Evaluation of the influence of cadmium salt addition on iodinated PVA-derived carbon nanofibers [Volume 22, Issue 6, 2015, Pages 2756-2765]
• Azar, Adel Robust-fuzzy model for supplier selection under uncertainty: An application to the automobile industry [Volume 25, Issue 4, 2018, Pages 2297-2311]
• Azarbakht, A. The dependence of conditional spectra on the choice of target periods [Volume 25, Issue 1, 2018, Pages 1-10]
• Azarhoushang, Bahman Conditioning of vitrified and resin bond CBN grinding wheels using a picosecond laser [Volume 24, Issue 5, 2017, Pages 2369-2378]
• Azari, E. Notes on mathematical formulation and complexity considerations for blocks relocation problem [Volume 22, Issue 6, 2015, Pages 2722-2728]
• Azari, Esmaeel Decreasing the Crane Working Time in Retrieving the Containers from a Bay [Volume 24, Issue 1, 2017, Pages 309-318]
• Azaron, A. Project Completion Time in Dynamic PERT Networks with Generating Projects [Volume 14, Issue 1, 2007]
• Azaron, A. Modeling stock-out loss and overstocking loss generated by bullwhip effect [Volume 26, Issue 3, 2019, Pages 1913-1924]
• Azeem Khan, W. The application of non-Fourier and Fick's laws to the flow of temperature-dependent thermal conductivity generalized Newtonian liquids: A 3D computational study [Volume 26, Issue 3, 2019, Pages 1516-1528]
• Azeem Khan, W. Computational analysis of the slow invariant manifold for single and multi-route reaction mechanisms [Volume 27, Issue 3, 2020, Pages 1293-1299]
• Azeem Khan, W. Entropy generation analysis for chemically reactive flow of Sutterby nanofluid considering radiation aspects [Volume 31, Issue 12, 2024, Pages 935-944]
• Azevedo, M.M. Average Distance and Routing Algorithms in the Star-Connected Cycles Interconnection Network [Volume 3, Issue 4, 1997]
• Azhir, E. Synthesis and antimicrobial properties of ZnO/PVA, CuO/PVA, and TiO2/PVA nanocomposites [Volume 24, Issue 3, 2017, Pages 1717-1723]
• Azid, I.A. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
• Azimi, B. Evaluation of sensitivity of CBFs for types of Bracing and story numbers [Volume 24, Issue 1, 2017, Pages 40-52]
• Azimi, G. Application of the Pitzer and the MSA-Based Models in Predicting the Activity and the Osmotic Coefficients of Aqueous Electrolyte Solutions [Volume 12, Issue 3, 2005]
• Azimi, M. Design, modeling, and impedance control of a new in-pipe inspection robot equipped by a manipulator [Volume 28, Issue 1, 2021, Pages 355-370]
• Azimi, Mohsen Retrofitting I-Beam to Double-I Built-up Column Connections Using Through Plates and T-Stiffeners [Volume 20, Issue 6, 2013, Pages 1695-1707]
• Azimi, P. On-line cross docking: A general new concept at a container port [Volume 22, Issue 6, 2015, Pages 2585-2594]
• Azimi, P. Multi-echelon supply chain network modelling and optimization via simulation and metaheuristic algorithms [Volume 23, Issue 1, 2016, Pages 330-347]
• Azimi, P. Solving the redundancy allocation problem of k-out-of-n with non-exponential repairable components using optimization via simulation approach [Volume 24, Issue 3, 2017, Pages 1547-1560]
• Azimi, P. Redundancy allocation problem with a mixed strategy for a system with k-out-of-n subsystems and time-dependent failure rates based on Weibull distribution: An optimization via simulation approach [Volume 26, Issue 2, 2019, Pages 1023-1038]
• Azimi, Parham Solving a multi-objective resource-constrained project scheduling problemusing Cuckoo optimizationalgorithm [Volume 21, Issue 6, 2014, Pages 2419-2428]
• Azimi, Parham An ANN-based optimization model for facility layout problem using simulation Technique [Volume 24, Issue 1, 2017, Pages 364-377]
• Azimi, Sajjad A Computational Model for Estimation of Mechanical Parameters in Chemotactic Endothelial Cells [Volume 23, Issue 1, 2016, Pages 260-267]
• Azimi, Sajjad A New Algorithm to Solve Sinusoidal Steady State Maxwell's Equations on Unstructured Grids [Volume 25, Issue 3, 2018, Pages 1296-1302]
• Azimi, Soheil Realization of Three-Dimensional Micro and Nano-Structures on Silicon Substrates [Volume 17, Issue 2, 2010]
• Azimi-Dastgerdi, A. A sustainable production-inventory model joint with preventive maintenance and multiple shipments for imperfect quality items [Volume 30, Issue 3, 2023, Pages 1204-1223]
• Azin, M. An 8-Bit Current-Mode Folding ADC with Optimized Active Averaging Network [Volume 15, Issue 2, 2008]
• Azizi, A. Numerical study of Jet Impingement Subcooled Boiling on the Superheated Surfaces [Volume 26, Issue 4, 2019, Pages 2369-2381]
• Azizi, Asghar A comprehensive study of the leaching behavior and dissolution kinetics of copper oxide ore in sulfuric acid lixiviant [Volume 25, Issue 3, 2018, Pages 1412-1422]
• Azizi, Azadeh Plasmonic Circular Dichroism Study of Gold Nanorod-Quadruplex Nanobioconjugates [Volume 25, Issue 3, 2018, Pages 1783-1788]
• Azizi, E. Presenting an integrated BWM-VIKOR-based approach for selecting suppliers of raw materials in the supply chain with emphasis on agility and flexibility criteria (Case study: Saipa Corporation) [Volume 26, Issue 4, 2019, Pages 2601-2614]
• Azizi, E. Designing a sustainable agile retail supply chain using multi-objective optimization methods (Case Study: SAIPA Company) [Volume 28, Issue 5, 2021, Pages 2933-2947]
• Azizi, N. Highly Ecient One-Pot Three-Component Mannich Reaction Under Solvent-Free Conditions [Volume 16, Issue 2, 2009]
• Azizi, N. A green procedure for one-pot synthesis of N,Ν΄-alkylidene bisamides under solvent- and catalyst-free conditions [Volume 26, Issue 3, 2019, Pages 1457-1462]
• Azizi, Najmadin Greenersynthesisof magnetic nanoparticles in an aqueous deepeutectic solvent [Volume 23, Issue 6, 2016, Pages 2750-2755]
• Azizi, R. Algorithm development for aerodynamic preliminary design of multi-stage axial compressors [Volume 23, Issue 5, 2016, Pages 2166-2178]
• Azizipour, Mohammad An Adaptive Relaxed Cellular Automata Method for Reliability-Based Hydropower Operation of Reservoirs [Volume 24, Issue 5, 2017, Pages 2294-2306]
• Azizsoltani, H. Numerical characterization of anisotropic damage evolution in iron based materials [Volume 21, Issue 1, 2014, Pages 53-66]
• Aziz-ur-Rehman, Aziz-ur-Rehman Synthesis and structure-activity relationship of 1-[(E)-3-phenyl-2-propenyl] piperazine derivatives as suitable antibacterial agents with mild hemolysis [Volume 26, Issue 6, 2019, Pages 3375-3386]
• Aziz-ur-Rehmana, Aziz-ur-Rehman Synthesis, characterization and biological screening of different carbamates derived from 7-hydroxy-4-methyl-2H-1-benzopyran-2-one [Volume 22, Issue 6, 2015, Pages 2241-2248]
• Azizyan, Gholamreza Numerical Analysis and Monitoring of an Embankment Dam During Construction and First Impounding (Case Study: Siah Sang Dam) [Volume 25, Issue 2, 2018, Pages 505-516]
• Azli, Y. Surface modification of biomaterial embedded with pits using die sinker machine [Volume 24, Issue 4, 2017, Pages 1901-1911]
• Azmi, Mohammad Improving the Accuracy of K-Nearest Neighbour Method in Long Lead Hydrological Forecasting [Volume 23, Issue 3, 2016, Pages 856-863]