References:
1. Sadeghianjahromi, A. and Wang, C.C. "Heat transfer enhancement in fin-and-tube heat exchangers - A review on different mechanisms", Renewable and Sustainable Energy Reviews, 137, 110470 (2021).
2. Nakhchi, M., Hatami, M., and Rahmati, M. "Effects of CuO nano powder on performance improvement and entropy production of double-pipe heat exchanger with innovative perforated turbulators", Advanced Powder Technology, 32(8), pp. 3063-3074 (2021).
3. Nakhchi, M., Hatami, M., and Rahmati, M. Experimental investigation of performance improvement of double-pipe heat exchangers with novel perforated elliptic turbulators", International Journal of Thermal Sciences, 168, 107057 (2021).
4. Hatami, M. "Nanoparticles migration around the heated cylinder during the RSM optimization of a wavy-wall enclosure", Advanced Powder Technology, 28(3), pp. 890-899 (2017).
5. Hatami, M., Song, D., and Jing, D. "Optimization of a circular-wavy cavity filled by nano fluid under the natural convection heat transfer condition", International Journal of Heat and Mass Transfer, 98, pp. 758-767 (2016).
6. Pourmehran, O., Rahimi-Gorji, M., Hatami, M., et al. "Numerical optimization of microchannel heat sink (MCHS) performance cooled by KKL based nano fluids in saturated porous medium", Journal of the Taiwan Institute of Chemical Engineers, 55, pp. 49-68 (2015).
7. Hatami, M. and Ganji, D. "Motion of a spherical particle in a fluid forced vortex by DQM and DTM", Particuology, 16, pp. 206-212 (2014).
8. Ghaedamini, H. and Amiri, M. "Effects of temperature and surfactant concentration on the structure and morphology of calcium carbonate nanoparticles synthesized in a colloidal gas aphrons system", Journal of Molecular Liquids, 282, pp. 213-220 (2019).
9. Sidik, N.A.C., Muhamad, M.N.A.W., Japar, W.M.A.A., et al. "An overview of passive techniques for heat transfer augmentation in microchannel heat sink", International Communications in Heat and Mass Transfer, 88, pp. 74-83 (2017).
10. Soltani, M.M., Gorji-Bandpy, M., Vaisi, A., et al. "Heat transfer augmentation in a double-pipe heat exchanger with dimpled twisted tape inserts: an experimental study", Heat and Mass Transfer, 58(9), pp. 1-16 (2022).
11. Vaisi, A., Moosavi, R., Javaherdeh, K., et al. "Experimental examination of condensation heat transfer enhancement with different perforated tube inserts", Experimental Heat Transfer, 36(2), pp. 1-27 (2021).
12. Nakhchi, M., Hatami, M., and Rahmati, M. "A numerical study on the effects of nanoparticles and stair fins on performance improvement of phase change thermal energy storages", Energy, 215, 119112 (2021).
13. Nakhchi, M., Hatami, M., and Rahmati, M. "Experimental investigation of heat transfer enhancement of a heat exchanger tube equipped with double-cut twisted tapes", Applied Thermal Engineering, 180, 115863 (2020).
14. Vaisi, A., Javaherdeh, K., and Moosavi, R. "Condensation heat transfer performance in multi-fluid compact heat exchangers with wavy and strip fins", International Journal of Heat and Mass Transfer, 182, 121968 (2022).
15. Vaisi, A., Javaherdeh, K., and Moosavi, R. "Experimental investigation of the thermal performance in a single-component two-phase flow in multistream multi- fluid plate-fin heat exchangers", International Journal of Thermal Sciences, 171, 107194 (2022).
16. Pourreza, T., Alijani, A., Maleki, V.A., et al. "The effect of magnetic field on buckling and nonlinear vibrations of Graphene nanosheets based on nonlocal elasticity theory", International Journal of Nano Dimension, 13(1), pp. 54-70 (2022).
17. Pourreza, T., Alijani, A., Maleki, V.A., et al. "Nonlinear vibration of nanosheets subjected to electromagnetic fields and electrical current", Advances in Nano Research, 10(5), pp. 481-491 (2021).
18. Duan, Y., Fu, H., Zhang, L., et al. "Embedding of ultra-dispersed MoS2 nanosheets in N, O heteroatommodi fied carbon nanofibers for improved adsorption of Hg2+", Composites Communications, 31, 101106 (2022).
19. Vahidi Pashaki, P., Pouya, M., and Maleki, V.A. "High-speed cryogenic machining of the carbon nanotube reinforced nanocomposites: Finite element analysis and simulation", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232(11), pp. 1927-1936 (2018).
20. Liu, Z., Wu, S., Jin, S., et al. "Investigating pose representations and motion contexts modeling for 3D Motion prediction", IEEE Transactions on Pattern Analysis and Machine Intelligence, 1, 101109 (2022).
21. Huang, K., Su, B., Li, T., et al. "Numerical simulation of the mixing behaviour of hot and cold fluids in the rectangular T-junction with/without an impeller", Applied Thermal Engineering, 204, 117942 (2022).
22. Rezaee, M. and Maleki, V.A. "An analytical solution for vibration analysis of carbon nanotube conveying viscose fluid embedded in visco-elastic medium", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229(4), pp. 644-650 (2015).
23. Mokhtari, S., Skelly, K., Krull, E., et al. Coppercontaining glass polyalkenoate cements based on SiO2-ZnO-CaO-SrO-P2O5 glasses: glass characterization, physical and antibacterial properties", Journal of Materials Science, 52(15), pp. 8886-8903 (2017).
24. Jahanmahin, O., Kirby, D.J., Smith, B.D., et al. "Assembly of gold nanowires on gold nanostripe arrays: simulation and experiment", The Journal of Physical Chemistry C, 124(17), pp. 9559-9571 (2020).
25. Zhou, Z., Davoudi, E., and Vaferi, B. "Monitoring the effect of surface functionalization on the CO2 capture by graphene oxide/methyl diethanolamine nano fluids", Journal of Environmental Chemical Engineering, 9(5), 106202 (2021).
26. Zhang, X., Tang, Y., Zhang, F., et al. "A novel aluminum-graphite dual-Ion battery", Advanced Energy Materials, 6(11), 1502588 (2016).
27. Wang, M., Jiang, C., Zhang, S., et al. "Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage", Nature Chemistry, 10(6), pp. 667-672 (2018).
28. Fatholahi, M., Anvari, A., and Akbari, O.A. "Numerical investigation of mixed convection of nano fluid flow in oblique rectangular microchannels with nano fluid jet injection", The European Physical Journal Plus, 136(10), 1062 (2021).
29. Seaberg, J., Kaabipour, S., and Hemmati, S. "A rapid milli fluidic synthesis of tunable polymer-protein nanoparticles", European Journal of Pharmaceutics and Biopharmaceutics, 154, pp. 127-135 (2020).
30. Pak, B.C. and Cho, Y.I. "Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particles", Experimental Heat Transfer an International Journal, 11(2), pp. 151-170 (1998).
31. Javaherdeh, K., Mozafarie, S.S., and Zare Talab, Z. "Numerical simulation of heat transfer turbulent flow for non-newtonian nano fluid in a double pipe Helical Heat Exchanger", Amirkabir Journal of Mechanical Engineering, 53(1), pp. 221-240 (2021).
32. Sharifi Asl, M., Toghraie, D., and Azimian, A. "Numerical simulation of convective heat transfer in a turbulant non-Newtonian nano fluid flow through a horizontal circular tube", Journal of Modeling in Engineering, 16(53), pp. 113-120 (2018).
33. Radwan, M.S., Saleh, H.E., and Attai, Y.A. "On heat transfer enhancement in diesel engine cylinder head using -Al2O3/water nano fluid with different nanoparticle sizes", Advances in Mechanical Engineering, 12(1), pp. 1-10 (2020).
34. Azmi, W., Hamid, K.A., Ramadhan, A., et al. "Thermal hydraulic performance for hybrid composition ratio of TiO2-SiO2 nano fluids in a tube with wire coil inserts", Case Studies in Thermal Engineering, 25, 100899 (2021).
35. Nakhchi, M.E., Hatami, M., and Rahmati, M. "Experimental investigation of performance improvement of double-pipe heat exchangers with novel perforated elliptic turbulators", International Journal of Thermal Sciences, 168, 107057 (2021).
36. Kongkaitpaiboon, V., Nanan, K., and Eiamsa-Ard, S. "Experimental investigation of heat transfer and turbulent flow friction in a tube fitted with perforated conical-rings", International Communications in Heat and Mass Transfer, 37(5), pp. 560-567 (2010).
37. Hatami, M. "Numerical study of nanofluids natural convection in a rectangular cavity including heated fins", Journal of Molecular Liquids, 233, pp. 1-8 (2017).
38. Nalavade, S., Deshmukh, P., and Sane, N. "Heat transfer and friction factor characteristics of turbulent flow using thermally non conductive twisted tape inserts", Materials Today: Proceedings, 52(3), pp. 373-378 (2022).
39. Ghasemi, S.E., Vatani, M., Hatami, M., et al. "Analytical and numerical investigation of nanoparticle effect on peristaltic fluid flow in drug delivery systems", Journal of Molecular Liquids, 215, pp. 88-97 (2016).
40. Hatami, M. and Safari, H. "Effect of inside heated cylinder on the natural convection heat transfer of nano fluids in a wavy-wall enclosure", International Journal of Heat and Mass Transfer, 103, pp. 1053- 1057 (2016).
41. Song, D., Hatami, M., Wang, Y., et al. "Prediction of hydrodynamic and optical properties of TiO2/water suspension considering particle size distribution", International Journal of Heat and Mass Transfer, 92, pp. 864-876 (2016).
42. Kucewicz, M., Baranowski, P., and Ma lachowski, J. "A method of failure modeling for 3D printed cellular structures", Materials & Design, 174, 107802 (2019).
43. Yakut, K., Sahin, B., and Canbazoglu, S. "Performance and flow-induced vibration characteristics for conical-ring turbulators", Applied Energy, 79(1), pp. 65-76 (2004).
44. Durmus, A. "Heat transfer and exergy loss in cut out conical turbulators", Energy Conversion and Management, 45(5), pp. 785-796 (2004).
45. Promvonge, P. and Eiamsa-Ard, S. "Heat transfer enhancement in a tube with combined conical-nozzle inserts and swirl generator", Energy Conversion and Management, 47(18-19), pp. 2867-2882 (2006).
46. Promvonge, P. "Heat transfer behaviors in round tube with conical ring inserts", Energy Conversion and Management, 49(1), pp. 8-15 (2008).
47. Karakaya, H. and Durmus, A. "Heat transfer and exergy loss in conical spring turbulators", International Journal of Heat and Mass Transfer, 60, pp. 756-762 (2013).
48. Liu, P., Zheng, N., and Shan, F. "An experimental and numerical study on the laminar heat transfer and flow characteristics of a circular tube fitted with multiple conical strips inserts", International Journal of Heat and Mass Transfer, 117, pp. 691-709 (2018).
49. Sheeba, A., Akhil, R., and Prakash, M.J. "Heat transfer and flow characteristics of a conical coil heat exchanger", International Journal of Refrigeration, 110, pp. 268-276 (2020).
50. Xiong, Q., Izadi, M., Shehzad, S., et al. "3D numerical study of conical and fusiform turbulators for heat transfer improvement in a double-pipe heat exchanger", International Journal of Heat and Mass Transfer, 170, 120995 (2021).
51. Ibrahim, M.M., Essa, M.A., and Mostafa, N.H. "A computational study of heat transfer analysis for a circular tube with conical ring turbulators", International Journal of Thermal Sciences, 137, pp. 138-160 (2019).
52. Nakhchi, M. and Esfahani, J. "Numerical investigation of turbulent Cu-water nano fluid in heat exchanger tube equipped with perforated conical rings", Advanced Powder Technology, 30(7), pp. 1338-1347 (2019).
53. Mohammed, H.A., Abuobeida, I.A.A., Vuthaluru, H.B., et al. "Two-phase forced convection of nano fluids flow in circular tubes using convergent and divergent conical rings inserts", International Communications in Heat and Mass Transfer, 101, pp. 10-20 (2019).
54. Lotfi, R., Saboohi, Y., and Rashidi, A. "Numerical study of forced convective heat transfer of nano fluids: comparison of different approaches", International Communications in Heat and Mass Transfer, 37(1), pp. 74-78 (2010).
55. Tavakoli, M.R., Ali Akbari, O., Mohammadian, A., et al. "Numerical study of mixed convection heat transfer inside a vertical microchannel with twophase approach", Journal of Thermal Analysis and Calorimetry, 135(2), pp. 1119-1134 (2019).
56. Esmaeili, H., Armaghani, T., and Abedini, A. "Turbulent combined forced and natural convection of nano fluid in a 3D rectangular channel using two-phase model approach", Journal of Thermal Analysis and Calorimetry, 135(6), pp. 3247-3257 (2019).
57. Nie, C., Marlow, W., and Hassan, Y. "Discussion of proposed mechanisms of thermal conductivity enhancement in nano fluids", International Journal of heat and Mass Transfer, 51(5-6), pp. 1342-1348 (2008).
58. Manca, O., Jaluria, Y., and Poulikakos, D. "Heat transfer in nanofluids", Advances in Mechanical Engineering, 2, 380826 (2010).