EBG and SRR Loaded Triple Band Notched UWB Antenna

Document Type : Article

Authors

1 Department of Electronics and Communication Engineering, Poornima University, Jaipur, Rajasthan, India

2 Department of Electronics and Communication Engineering, Jaipur Engineering College and Research Centre, Jaipur, Rajasthan, India

3 Department of Electronics and Communication, Manipal University Jaipur, Jaipur, Rajasthan, India

Abstract

A compact triple band notched ultra-wideband (UWB) monopole antenna is presented in this paper. Split Ring Resonator (SRR) structure is exploited in various forms like Complementary Split Ring Resonator (CSRR), Split Ring Resonator Pair (SRRP) and CSRR on Electromagnetic Band Gap (EBG) structure to produce triple band notched characteristics in UWB spectrum. The proposed antenna produces triple band notched functions with integration of all three types of SRR on primary antenna. The parametric analysis of each form of SRR is presented along with their current distribution effects on triple band notched antenna. The proposed antenna prototype is fabricated and measured results are also compared with simulated one to understand the discrepancies. The measured and simulated results are presented to investigate the band notching characteristics of suggested antenna in terms of VSWR and radiation characteristics.

Keywords


  • References

    • [1] “Revision of Part 15 of the Commission’s Rules Regarding Ultra WideBand Transmission Systems,” Federal Communications Commission, Dec. 27, 2015. https://www.fcc.gov/document/revision-part-15-commissions-rules-regarding-ultra-wideband-7.
    • [2] Chen, Z. N., “UWB Antennas: From Hype, Promise to Reality,” in 2007 Loughborough Antennas and Propagation Conference, Apr. 2007, pp. 19–22. doi: 10.1109/LAPC.2007.367424.
    • [3] Lee, W. S., Kim, K. J., Kim, D. Z., et al. “Compact frequency notched wideband planar monopole antenna with an L-shaped ground plane.” Opt. Technol. Lett., vol. 46, no. 4, pp. 340–343, 2005.
    • [4] Peng, L., Wen, B. J., Li, X. F., et al. “CPW Fed UWB Antenna by EBGs With Wide Rectangular Notched-Band,” IEEE Access, vol.4, 2016 doi: 10.1109/ACCESS.2016.2646338
    • [5] Jaglan, N., Kanaujia, B. K., Gupta, S. D. et al.“Design and Development of an Efficient EBG Structures Based Band Notched UWB Circular Monopole Antenna,” Wireless Pers Commun 96, 5757–5783, (2017). https://doi.org/10.1007/s11277-017-4446-2
    • [6] Song, C. Y., Yang, T. Y., Lin, W. W., et al, “Design of a band-notched UWB antenna based on EBG structure,” in 2013 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices, Oct. 2013, pp. 274–277. doi: 10.1109/ASEMD.2013.6780773.
    • [7] Mandal, T. and Das, S., “Design of dual notch band UWB printed monopole antenna using electromagnetic-bandgap structure,” Opt. Technol. Lett., vol. 56, no. 9, pp. 2195–2199, 2014, doi: 10.1002/mop.28526.
    • [8] Abdalla, M. A., Al-Mohamadi, A., and Mostafa, A., “Dual notching of UWB antenna using double inversed U-shape compact EBG structure,” in 2016 10th International Congress on Advanced Electromagnetic Materials in Microwaves and Optics (METAMATERIALS), Sep. 2016, pp. 1–3. doi: 10.1109/MetaMaterials.2016.7746375.
    • [9] Yazdi, M. and Komjani, N., “Design of a Band-Notched UWB Monopole Antenna by Means of an EBG Structure,” IEEE Antennas Wirel. Propag. Lett., vol. 10, pp. 170–173, 2011, doi: 10.1109/LAWP.2011.2116150.
    • [10] Krishnamoorthy K, Majumder, B. and Mukherjee, J., "Dual polarized reconfigurable dual band-notched UWB antenna with novel tunable EBG structure," 2013 IEEE Applied Electromagnetics Conference (AEMC), 2013, pp. 1-2, doi: 10.1109/AEMC.2013.7045104.
    • [11] Peng, L. and Ruan, C. L., “UWB Band-Notched Monopole Antenna Design Using Electromagnetic-Bandgap Structures,” IEEE Trans. Microw. Theory Tech., vol. 59, no. 4, pp. 1074–1081, Apr. 2011, doi: 10.1109/TMTT.2011.2114090.
    • [12] Bhavarthe, P. P., Rathod, S. S. and Reddy, K. T. V., “A Compact Dual Band Gap Electromagnetic Band Gap Structure,” IEEE Trans. Antennas Propag., vol. 67, no. 1, pp. 596–600, Jan. 2019, doi: 10.1109/TAP.2018.2874702.
    • [13] Lakrit, S., Das, S., Alami, A. E., Barad, D., et al., “A Compact UWB Monopole Patch Antenna with Reconfigurable Band-notched Characteristics for Wi-MAX and WLAN applications,” AEU - Int. J. Electron. Commun., vol. 105, pp. 106–115, Jun. 2019, doi: 10.1016/j.aeue.2019.04.001.
    • [14] Safia, O. A., Nedil, M., Talbi, L., et al., "Coplanar waveguide-fed rose-curve shape UWB monopole antenna with dual-notch characteristics," IET Microwaves, Antennas & Propagation, vol. 12, no. 7, pp. 1112-1119, 13 6 2018. doi: 10.1049/iet-map.2017.0852.
    • [15] Srivastava, K., Kumar, A., Kanaujia B. K. et al., "Integrated GSM-UWB Fibonacci-type antennas with single, dual, and triple notched bands," IET Microwaves, Antennas & Propagation, vol. 12, no. 6, pp. 1004-1012, 2018. doi: 10.1049/iet-map.2017.0074
    • [16] Vendik, I. B., Rusakov, A., Kanjanasit, K., et al., "Ultrawideband (UWB) Planar Antenna with Single-, Dual-, and Triple-Band Notched Characteristic Based on Electric Ring Resonator," IEEE Antennas and Wireless Propagation Letters, vol. 16, pp. 1597-1600, 2017. doi: 10.1109/LAWP.2017.2652978
    • [17] Awan, W. A., Zaidi, A., Hussain, N., et al., Stub loaded, low profile UWB antenna with independently controllable notch‐bands. Microwave and Optical Technology Letters, 61, 2447 – 2454, 2019. Doi: 1002/mop.31915
    • [18] Chen, X., Xu, F., and Tan, X., “Design of a Compact UWB Antenna with Triple Notched Bands Using Nonuniform Width Slots,” Sens., vol. 2017, pp. 1–9, 2017, doi: 10.1155/2017/7673168.
    • [19] Qurratul, A., and Neela, C., “Parametric study and Analysis of Band Stop Characteristics for a Compact UWB Antenna with Tri-band notches,” Journal of Microwaves, Optoelectronics and Electromagnetic Applications. 2018, v. 17, n.4, pp. 509-527. Doi: 10.1590/2179-10742018v17i41314.
    • [20] Doddipalli, S. and Kothari, A., "Compact UWB Antenna With Integrated Triple Notch Bands for WBAN Applications," in IEEE Access, vol. 7, pp. 183-190, 2019, doi: 10.1109/ACCESS.2018.2885248.
    • [21] Shaik, L. A., Saha, C., Antar, Y. M. M., et al., "An Antenna Advance for Cognitive Radio: Introducing a Multilayered Split Ring Resonator-Loaded Printed Ultrawideband Antenna with Multifunctional Characteristics," in IEEE Antennas and Propagation Magazine, vol. 60, no. 2, pp. 20-33, April 2018, doi: 10.1109/MAP.2018.2796027.
    • [22] Tang, Z., Wu, X., Zhan, J., et al., "Compact UWB-MIMO Antenna With High Isolation and Triple Band-Notched Characteristics," in IEEE Access, vol. 7, pp. 19856-19865, 2019, doi: 10.1109/ACCESS.2019.2897170.
    • [23] Awan, W. A, Zaidi, A., Hussain, N., et al., “Stub loaded, low profile UWB antenna with independently controllable notch-bands”, Microw Opt Technol Lett. 2019; 61: 2447– 2454. doi: 10.1002/mop.31915.
    • [24] Naji, D. K., “Miniature Slotted Semi-Circular Dual-Band Antenna for WiMAX and WLAN Applications,” Journal of Electromagnetic Engineering and Science,2020, Vo.20, No.2, pp.115-124. Doi:10.26866/jees.2020.20.2.115.
    • [25] Zeng, Y. C., Zhang, H., Min, X. L., et al., "A Triple Band-Notched UWB Antenna Using Folded Resonators " Frequenz, vol. 73, no. 1-2, 2019, pp. 37-43. doi:10.1515/freq-2018-0059.
    • [26] Abbas, A., Hussain, N., Lee, J., et al., "Triple Rectangular Notch UWB Antenna Using EBG and SRR," in IEEE Access, vol. 9, pp. 2508-2515, 2021, doi: 10.1109/ACCESS.2020.3047401.
    • [27] Jeong, M. J., Hussain, N., Bong, H. U., et al., “Ultrawideband microstrip patch antenna with quadruple band notch characteristic using negative permittivity unit cells,” Microw Opt. Technol. Lett.2020; 62: 816– 824.

     Doi: 10.1002/mop.32078

    • [28] Ray, K. P. and Ranga, Y., "Ultrawideband Printed Elliptical Monopole Antennas," in IEEE Transactions on Antennas and Propagation, vol. 55, no. 4, pp. 1189-1192, April 2007, doi: 10.1109/TAP.2007.893408.