Author Index

A

  • Abbas, Nadeem Analytical view of magnetic hydrodynamic rotating flow of Barium Ferrite nano fluid with viscous dissipation [Volume 27, Issue 6, 2020, Pages 3421-3433]
  • Abbas, Z. Series solution of slip ow of Al2O3 and Fe3O4 nanoparticles in a horizontal channel with a porous medium by using least square and Galerkin methods [Volume 27, Issue 5, 2020, Pages 2465-2477]
  • Abbasi-Pooya, A. An effective league championship algorithm for the stochastic multi-period portfolio optimization problem [Volume 27, Issue 2, 2020, Pages 829-845]
  • Abbassi, A. Computational optimization of a UFAD system using large eddy simulation [Volume 27, Issue 6, 2020, Pages 2871-2888]
  • Abdelaziz, A.Y. Design and analysis of solar photovoltaic-fed Z-source inverter-based dynamic voltage restorer [Volume 27, Issue 6, 2020, Pages 3190-3203]
  • Abdi, M.A. Experimental investigation of shock wave oscillation on a thin supercritical airfoil [Volume 27, Issue 2, 2020, Pages 795-805]
  • Abdollahi, A. Dynamic negawatt demand response resource modeling and prioritizing in power markets [Volume 27, Issue 3, 2020, Pages 1361-1372]
  • Abdollahi, A. Dynamic negawatt demand response resource modeling and prioritizing in power markets [Volume 27, Issue 3, 2020, Pages 1361-1372]
  • Abdul Hakeem, A.K. Comparison of disparate solid volume fraction ratios of hybrid nanofluids flow over a permeable flat surface with aligned magnetic field and Marangoni convection [Volume 27, Issue 6, 2020, Pages 3367-3380]
  • Abdzadeh, B. Bi-objective optimization of non-periodic preventive maintenance strategy by considering time value of money [Volume 27, Issue 6, 2020, Pages 3305-3321]
  • Abedi, M. Experimental investigation into the effects of Mach number and boundary-layer bleed on flow stability of a supersonic air intake [Volume 27, Issue 3, 2020, Pages 1197-1205]
  • Abedian, A. An approximate methodology to simulate combined conduction-radiation heat transfer for multi-layer insulator [Volume 27, Issue 6, 2020, Pages 2924-2932]
  • Abid, M. Enhancing efficiency of ratio-type estimators of population variance by a combination of information on robust location measures [Volume 27, Issue 4, 2020, Pages 2040-2056]
  • Abiri, E. Modified quasi-Y-source converter for increasing boost factor [Volume 27, Issue 3, 2020, Pages 1494-1505]
  • Abooie, M.H. A POMDP framework to find optimal policy in sustainable maintenance [Volume 27, Issue 3, 2020, Pages 1544-1561]
  • Abrishami, J. Riprap design at bridge piers with limited scouring [Volume 27, Issue 2, 2020, Pages 588-595]
  • Abrishami, S.J. An integrated lot-sizing model with supplier and carrier selection and quantity discounts considering multiple products [Volume 27, Issue 4, 2020, Pages 2140-2156]
  • Abtahi, S.A. Experimental behavior of circular foundations on oil contaminated sand [Volume 27, Issue 1, 2020, Pages 80-87]
  • Abtahi, Z. Predictive heuristics for generating robust and stable schedules in single-machine systems under disruption [Volume 27, Issue 5, 2020, Pages 2592-2603]
  • Adeli, H. Machine learning in structural engineering [Volume 27, Issue 6, 2020, Pages 2645-2656]
  • Adib, A. Prediction of meteorological and hydrological phenomena in different climatic scenarios in the Karkheh watershed (southwest of Iran) [Volume 27, Issue 4, 2020, Pages 1814-1825]
  • Adib, A. Estimation of mixed-mode fracture parameters by gene expression programming [Volume 27, Issue 1, 2020, Pages 229-238]
  • Aflaki, N. Variance-based features for keyword extraction in Persian and English text documents [Volume 27, Issue 3, 2020, Pages 1301-1315]
  • Afrasiab, H. Numerical and experimental study of the effect of the process parameters on the void evolution in the cold extrusion of rods [Volume 27, Issue 1, 2020, Pages 287-294]
  • Afsahi, M. Optimizing decisions on under- and out-of-warranty products in a finite planning horizon [Volume 27, Issue 1, 2020, Pages 494-515]
  • Afshari, J. Investigating the effects of impact directions on improving head injury index [Volume 27, Issue 4, 2020, Pages 1867-1877]
  • Aghaie, A. Robust optimization for the resource-constrained multi-project scheduling problem with uncertain activity durations [Volume 27, Issue 1, 2020, Pages 361-376]
  • Ahmad, M. On a new family of Kies Burr III distribution: Development, properties, characterizations, and applications [Volume 27, Issue 5, 2020, Pages 2555-2571]
  • Ahmadi, G. Computer modeling of the operating room ventilation performance in connection with surgical site infection [Volume 27, Issue 2, 2020, Pages 704-714]
  • Ahmadi, G. Environmental impact analysis of high-rise buildings for resilient urban development [Volume 27, Issue 4, 2020, Pages 1843-1857]
  • Ahmadi, H.R. A rule-based post-processing approach to improve Persian OCR performance [Volume 27, Issue 6, 2020, Pages 3019-3033]
  • Ahmadi, M. Studying buckling of composite rods made of hybrid carbon fiber/carbon nanotube-reinforced polyimide using multi-scale FEM [Volume 27, Issue 1, 2020, Pages 252-261]
  • Ahmadian, M. T. A novel procedure for micromechanical characterization of white matter constituents at various strain rates [Volume 27, Issue 2, 2020, Pages 784-794]
  • Ahmadian, M.T. Investigation into the interaction between quartz nanostructures and human cell lines for tissue engineering [Volume 27, Issue 5, 2020, Pages 2343-2352]
  • Ahmadi Dastgerdi, K. Model reference adaptive control of a small satellite in the presence of parameter uncertainties [Volume 27, Issue 6, 2020, Pages 2933-2944]
  • Akella, A.K. Design and analysis of solar photovoltaic-fed Z-source inverter-based dynamic voltage restorer [Volume 27, Issue 6, 2020, Pages 3190-3203]
  • Akhbari, M. Partnership of contractors in cooperative game theory approach to project resource management [Volume 27, Issue 1, 2020, Pages 469-480]
  • Akhtarpour, A. The deformation mechanism of a high rockfill dam during the construction and first impounding [Volume 27, Issue 2, 2020, Pages 566-587]
  • Akkaya Oy, S. Design and optimization of tubular linear permanent-magnet generator with performance improvement using response surface methodology and multi-objective genetic algorithm [Volume 27, Issue 6, 2020, Pages 3053-3065]
  • Alabyev, V.R. Economic efficiency of the application of artificial air cooling for normalization of thermal conditions in oil mines [Volume 27, Issue 3, 2020, Pages 1606-1615]
  • Alarjani, A. Tensile creep monitoring of basalt fiber-reinforced polymer plates via electrical potential change and artificial neural network [Volume 27, Issue 4, 2020, Pages 1995-2008]
  • Alasty, A. Optimal tuner selection using Kalman filter for a real-time modular gas turbine model [Volume 27, Issue 2, 2020, Pages 806-818]
  • Alemtabriz, A. A multi-stage stochastic programming model for sustainable closed-loop supply chain network design with financial decisions: A case study of plastic production and recycling supply chain [Volume 27, Issue 1, 2020, Pages 377-395]
  • Algieri, C. Preparation of Pt-ZSM-5 zeolite membrane catalysts for the isomerization of linear alkane [Volume 27, Issue 3, 2020, Pages 1243-1252]
  • Ali, K.K. A septic B-spline collocation method for solving nonlinear singular boundary value problems arising in physiological models [Volume 27, Issue 3, 2020, Pages 1674-1874]
  • Ali, M. Computational analysis of the slow invariant manifold for single and multi-route reaction mechanisms [Volume 27, Issue 3, 2020, Pages 1293-1299]
  • Ali, N. Analysis of the second-grade fluid flow in a porous channel by Cattaneo-Christov and generalized Fick's theories [Volume 27, Issue 4, 2020, Pages 1945-1954]
  • Alizadeh, S. Numerical investigation of Cover Plate in RCS connections [Volume 27, Issue 1, 2020, Pages 10-24]
  • Alsaedi, A Importance of activation energy and heat source on nanoliquid flow with gyrotactic microorganisms [Volume 27, Issue 6, 2020, Pages 3381-3389]
  • Alsaedi, A. Novel aspects of Soret and Dufour in entropy generation minimization for Williamson fluid flow [Volume 27, Issue 5, 2020, Pages 2451-2464]
  • Alsaedi, A. Entropy generation analysis of peristaltic flow of magneto-nanoparticles suspended in water under second-order slip conditions [Volume 27, Issue 6, 2020, Pages 3434-3446]
  • Alsaedi, Ahmed Modeling for radiated Marangoni convection flow of magneto-nanoliquid subject to activation energy and chemical reaction [Volume 27, Issue 6, 2020, Pages 3390-3398]
  • Altabey, W.A. Tensile creep monitoring of basalt fiber-reinforced polymer plates via electrical potential change and artificial neural network [Volume 27, Issue 4, 2020, Pages 1995-2008]
  • Alvanchi, A. Improving facility management of public hospitals in Iran using building information modeling [Volume 27, Issue 6, 2020, Pages 2817-2829]
  • Amani, E. Computational optimization of a UFAD system using large eddy simulation [Volume 27, Issue 6, 2020, Pages 2871-2888]
  • Amezquita-Sancheza, J.P. Machine learning in structural engineering [Volume 27, Issue 6, 2020, Pages 2645-2656]
  • Aminfar, H. Numerical investigation into the effect of viscosity on bubble dynamics in a narrow channel [Volume 27, Issue 5, 2020, Pages 2419-2432]
  • Amini, H. Freight modal policies toward a sustainable society [Volume 27, Issue 6, 2020, Pages 2690-2703]
  • Amiri, A. Effect of processing time on microstructure of surface and corrosion resistance of coatings resulting from plasma electrolytic oxidation on titanium alloy in hydroxyapatite nano-particles electrolyte [Volume 27, Issue 1, 2020, Pages 302-309]
  • Amirifar, L. Investigation into the interaction between quartz nanostructures and human cell lines for tissue engineering [Volume 27, Issue 5, 2020, Pages 2343-2352]
  • Anand, A. A holistic framework for lot sizing problem for fast-moving perishable products [Volume 27, Issue 4, 2020, Pages 2021-2039]
  • Anjabin, N. Modeling the CO gas response of PEDOT:PSS/Fe(salen) thin film for a gas sensor [Volume 27, Issue 3, 2020, Pages 1227-1233]
  • Ansari, R. Studying buckling of composite rods made of hybrid carbon fiber/carbon nanotube-reinforced polyimide using multi-scale FEM [Volume 27, Issue 1, 2020, Pages 252-261]
  • Aqeel, M. Series solution of slip ow of Al2O3 and Fe3O4 nanoparticles in a horizontal channel with a porous medium by using least square and Galerkin methods [Volume 27, Issue 5, 2020, Pages 2465-2477]
  • Arabloo, F. Modeling the CO gas response of PEDOT:PSS/Fe(salen) thin film for a gas sensor [Volume 27, Issue 3, 2020, Pages 1227-1233]
  • Ardakani, A. Laboratory investigation of geotextile position on CBR of clayey sand soil under freeze-thaw cycle [Volume 27, Issue 6, 2020, Pages 2808-2816]
  • Arkian, F. PM10 and CO dispersion modeling of emissions from four thermal power plants in Mashhad, Iran [Volume 27, Issue 5, 2020, Pages 2433-2442]
  • Arslan, S. Design and optimization of tubular linear permanent-magnet generator with performance improvement using response surface methodology and multi-objective genetic algorithm [Volume 27, Issue 6, 2020, Pages 3053-3065]
  • Asadi Dalir, M. Exact mathematical solution for nonlinear free transverse vibrations of beams [Volume 27, Issue 3, 2020, Pages 1290-1301]
  • Asadi Dereshgi, H. A Novel Inductive Tactile Probe Design for Lump Detection in Soft Tissue Phantoms [Volume 27, Issue 6, 2020, Pages 3118-3127]
  • Asadi-Gangraj, E. Dynamic virtual cell formation considering new product development [Volume 27, Issue 4, 2020, Pages 2093-2107]
  • Asadi Ghoozhdi, H. Effect of damped outriggers arrangement on the seismic response of high-rise steel structures [Volume 27, Issue 3, 2020, Pages 1075-1090]
  • Asadkhani, J. Extended economic production quantity models with preventive maintenance [Volume 27, Issue 6, 2020, Pages 3253-3264]
  • Asghar, Saleem Importance of activation energy and heat source on nanoliquid flow with gyrotactic microorganisms [Volume 27, Issue 6, 2020, Pages 3381-3389]
  • Asghar, Saleem Modeling for radiated Marangoni convection flow of magneto-nanoliquid subject to activation energy and chemical reaction [Volume 27, Issue 6, 2020, Pages 3390-3398]
  • Asghari, H. Parameter converting method for bifurcation analysis of nonlinear dynamical systems [Volume 27, Issue 1, 2020, Pages 310-329]
  • Ashrafi, S.M. Prediction of meteorological and hydrological phenomena in different climatic scenarios in the Karkheh watershed (southwest of Iran) [Volume 27, Issue 4, 2020, Pages 1814-1825]
  • Aslam, M. On designing CUSUM charts using ratio-type estimators for monitoring the location of normal processes [Volume 27, Issue 3, 2020, Pages 1593-1605]
  • Aslantas, K. Powder metallurgy Mg-Sn alloys: Production and characterization [Volume 27, Issue 3, 2020, Pages 1255-1265]
  • Atabakhshian, V. Pulsating flow induced parametric instabilities of a smart embedded micro-shell based on nonlocal piezoelasticity theory [Volume 27, Issue 2, 2020, Pages 730-744]
  • Attar, N. Constructing automated test oracle for low observable software [Volume 27, Issue 3, 2020, Pages 1333-1351]
  • Attari, N. K. A. Numerical investigation of Cover Plate in RCS connections [Volume 27, Issue 1, 2020, Pages 10-24]
  • Attarnejad, R. Seismic performance of EBFs equipped with an innovative shape memory alloy damper [Volume 27, Issue 5, 2020, Pages 2316-2325]
  • Auchar Zardari, M. Mechanical properties of soft tailings from different depths of a Swedish tailings dam: Results from triaxial tests [Volume 27, Issue 3, 2020, Pages 1066-1074]
  • AVCI, E. The effect of different curing temperatures on engineering properties of chemically grouted sands [Volume 27, Issue 3, 2020, Pages 1144-1161]
  • Awais, M. Deposition of anti-stick coatings to prevent hydrocarbon buildup on truck engines [Volume 27, Issue 5, 2020, Pages 2489-2497]
  • Ayyubi, J. Flexural retrofitting of the damaged reinforced concrete beams by using HPFRCC [Volume 27, Issue 6, 2020, Pages 2680-2689]
  • Azadi Moghaddam, M. Modeling and optimization of the electrical discharge machining process based on a combined artificial neural network and particle swarm optimization algorithm [Volume 27, Issue 3, 2020, Pages 1206-1217]
  • Azadvar, N. Numerical investigation of Cover Plate in RCS connections [Volume 27, Issue 1, 2020, Pages 10-24]
  • Azeem Khan, W. Computational analysis of the slow invariant manifold for single and multi-route reaction mechanisms [Volume 27, Issue 3, 2020, Pages 1293-1299]

B

  • Babaluo, A.A. Preparation of Pt-ZSM-5 zeolite membrane catalysts for the isomerization of linear alkane [Volume 27, Issue 3, 2020, Pages 1243-1252]
  • Babashahi, M. A bi-objective hierarchical hub location model with facility failure [Volume 27, Issue 4, 2020, Pages 2009-2020]
  • Babic, L. A new aspect of transition between line and continuous spectrum and its relation to seismic in influence on structures [Volume 27, Issue 3, 2020, Pages 1515-1524]
  • Babic, R. A new aspect of transition between line and continuous spectrum and its relation to seismic in influence on structures [Volume 27, Issue 3, 2020, Pages 1515-1524]
  • Babrzadeh, S. Sensitivity analysis of economic variables using neuro-fuzzy approach [Volume 27, Issue 3, 2020, Pages 1352-1359]
  • Badri, M.T. A kinetic study of acetone acidic oxidation with KMnO4 in the absence and presence of CuO/γAl2O3 as a heterogeneous nano-catalyst [Volume 27, Issue 3, 2020, Pages 1234-1242]
  • Baghani, M. Size dependent analysis of tapered FG micro-bridge based on a 3D beam theory [Volume 27, Issue 6, 2020, Pages 2889-2901]
  • Bagheri Chenar, Q. Application of petrographic image analysis for the assessment of chemical attack in the concrete segments of a tunnel [Volume 27, Issue 3, 2020, Pages 1187-1195]
  • Bahaari, M.R. SCF distribution in FRP-strengthened tubular T-joints under brace axial loading [Volume 27, Issue 3, 2020, Pages 1113-1129]
  • Bahrami, Z. N-(2-pyridylmethyl)-L-histidine functionalized Fe3O4 magnetic nanoparticles as an efficient catalyst for synthesis of β-amino ketones [Volume 27, Issue 3, 2020, Pages 1207-1215]
  • Bajaj, R.K. On accuracy function and distance measures of interval-valued Pythagorean fuzzy sets with application to decision making [Volume 27, Issue 4, 2020, Pages 2127-2139]
  • Bamoniri, A. Green one-pot three-component synthesis of 4H-chromenes in the presence of nano-kaoline/BF3/Fe3O4 as a super paramagnetic nanocatalyst [Volume 27, Issue 3, 2020, Pages 1216-1225]
  • Bangwar, D.K. Suitability of brick kiln waste as a stabilizer for clayey soils [Volume 27, Issue 5, 2020, Pages 2258-2263]
  • Bangwar, D.K. A new approach to improving durability of rice husk ash blended concrete with re-dispersible polymer powder [Volume 27, Issue 4, 2020, Pages 1858-1865]
  • Banitaba, Hossein Electrochemical determination of glutathione in hemolyzed erythrocytes [Volume 27, Issue 6, 2020, Pages 3412-3420]
  • Barati, M. A kinetic study of acetone acidic oxidation with KMnO4 in the absence and presence of CuO/γAl2O3 as a heterogeneous nano-catalyst [Volume 27, Issue 3, 2020, Pages 1234-1242]
  • Barghian, M. Soil behavior around the stub abutment of an integral bridge and buried piles in the contraction state [Volume 27, Issue 1, 2020, Pages 88-104]
  • Barik, A.K. Heat transfer correlation for a cross-flow jet impingement on a protruded surface [Volume 27, Issue 3, 2020, Pages 1218-1229]
  • Barooghi, B. Effect of processing time on microstructure of surface and corrosion resistance of coatings resulting from plasma electrolytic oxidation on titanium alloy in hydroxyapatite nano-particles electrolyte [Volume 27, Issue 1, 2020, Pages 302-309]
  • Barzegar Gerdroodbary, M. Development of micro gas actuator for analyzing gas mixture [Volume 27, Issue 6, 2020, Pages 2945-2953]
  • Bashir, M.N. Analysis of the second-grade fluid flow in a porous channel by Cattaneo-Christov and generalized Fick's theories [Volume 27, Issue 4, 2020, Pages 1945-1954]
  • Bavali, M. Optimal location of stone column for stabilization of sand slope: An experimental and 3D numerical investigation [Volume 27, Issue 1, 2020, Pages 105-116]
  • Bayati, B. Preparation of Pt-ZSM-5 zeolite membrane catalysts for the isomerization of linear alkane [Volume 27, Issue 3, 2020, Pages 1243-1252]
  • Bazgir, Saeed Electrospinning of smart thermochromic nanofibers as sensors [Volume 27, Issue 6, 2020, Pages 3447-3453]
  • Bazhina, T.P. Economic efficiency of the application of artificial air cooling for normalization of thermal conditions in oil mines [Volume 27, Issue 3, 2020, Pages 1606-1615]
  • Behjati Ardakani, S. Spaser Based on Graphene Tube [Volume 27, Issue 6, 2020, Pages 3084-3095]
  • Behnamfar, F. Effects of seismic pounding between adjacent structures considering structure-soil-structure interaction [Volume 27, Issue 5, 2020, Pages 2230-2246]
  • Belic, M. Optical solitons in birefringent fibers with four-wave mixing by extended trial equation method [Volume 27, Issue 6, 2020, Pages 3035-3052]
  • Bhanbhro, R. Mechanical properties of soft tailings from different depths of a Swedish tailings dam: Results from triaxial tests [Volume 27, Issue 3, 2020, Pages 1066-1074]
  • Bhattacharjee, K. A comparative study of economic load dispatch using sine cosine algorithm [Volume 27, Issue 3, 2020, Pages 1467-1480]
  • Bhattacharjee, K. An experimental study regarding economic load dispatch using search group optimization [Volume 27, Issue 6, 2020, Pages 3175-3189]
  • Bhattacharya, A. Quasi-oppositional symbiotic organisms search algorithm for different economic load dispatch problems [Volume 27, Issue 6, 2020, Pages 3096-3117]
  • Bhatti, F.A. On a new family of Kies Burr III distribution: Development, properties, characterizations, and applications [Volume 27, Issue 5, 2020, Pages 2555-2571]
  • Bidabadi, M. Analytical model of the influence of recirculation on premixed combustion of lycopodium dust particles: A study of thermal resistance and random distribution of particles [Volume 27, Issue 5, 2020, Pages 2353-2363]
  • Bijari, Sh. Simultaneous analysis and optimal design of truss structures via displacement method [Volume 27, Issue 3, 2020, Pages 1176-1186]
  • Bina, M.A. High-accuracy power sharing in parallel inverters in an islanded microgrid using modified sliding mode control approach [Volume 27, Issue 6, 2020, Pages 3128-3139]
  • Birjandi, A. Designing a resource-constrained project scheduling model considering multiple routes for flexible project activities: Meta-heuristic algorithms [Volume 27, Issue 5, 2020, Pages 2572-2591]
  • Biswal, B.B. Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel [Volume 27, Issue 6, 2020, Pages 2838-2852]
  • Biswas, A. Optical solitons in birefringent fibers with four-wave mixing by extended trial equation method [Volume 27, Issue 6, 2020, Pages 3035-3052]
  • Bizimana, H. Flood hazard risk evaluation using fuzzy logic and weightage- based combination methods in geographic information system [Volume 27, Issue 2, 2020, Pages 517-528]
  • B. Kazemzadeh, R. A solution based on fuzzy max-min approach to the bi-level programming model of energy and exiramp procurement in day-ahead market [Volume 27, Issue 2, 2020, Pages 846-861]
  • Bonyadi Naeini, A. Technology valuation of NTBFs in the field of cleaner production in terms of investors' exibility and uncertainty in public policy [Volume 27, Issue 6, 2020, Pages 3322-3337]
  • Boran, S. Integration of machine learning techniques and control charts in multivariate processes [Volume 27, Issue 6, 2020, Pages 3233-3241]
  • Buyukgungor, O. N-(2-pyridylmethyl)-L-histidine functionalized Fe3O4 magnetic nanoparticles as an efficient catalyst for synthesis of β-amino ketones [Volume 27, Issue 3, 2020, Pages 1207-1215]

C

  • Cabrera, K. Inventory model optimization revisited: Understanding service inventories to improve performance [Volume 27, Issue 3, 2020, Pages 1572-1592]
  • Canpolat, O. Fuzzy cognitive mapping approach to the assessment of Industry 4.0 tendency [Volume 27, Issue 5, 2020, Pages 2635-2643]
  • Cardenas-Barron, L.E. Inventory model optimization revisited: Understanding service inventories to improve performance [Volume 27, Issue 3, 2020, Pages 1572-1592]
  • Chaudhary, S. Assessment of Mechanical and Durability Properties of Concrete Containing PET Waste [Volume 27, Issue 1, 2020, Pages 1-9]
  • Chen, E. Space headway calculation and analysis at turn movement trajectories using hybrid model [Volume 27, Issue 6, 2020, Pages 2669-2679]
  • Chen, Zh. Optimal production inventory decision with learning and fatigue behavioral effects in labor-intensive manufacturing [Volume 27, Issue 2, 2020, Pages 918-934]
  • Chiu, A.C.F. A vacuum-refilled tensiometer for deep monitoring of in-situ pore water pressure [Volume 27, Issue 2, 2020, Pages 596-606]
  • Chiu, Y.H. Innovation and environmental performance: An empirical study of 31 cities in China [Volume 27, Issue 2, 2020, Pages 956-969]
  • Chu, J. DEA altruism and exclusiveness cross-efficiency evaluation models [Volume 27, Issue 5, 2020, Pages 2499-2513]
  • Cil, I. Integration of machine learning techniques and control charts in multivariate processes [Volume 27, Issue 6, 2020, Pages 3233-3241]

D

  • Dai, W. DEA altruism and exclusiveness cross-efficiency evaluation models [Volume 27, Issue 5, 2020, Pages 2499-2513]
  • Daneshvar, M. H. Investigating the behavior factor of coupled concrete shear walls with steel coupling beam [Volume 27, Issue 5, 2020, Pages 2189-2197]
  • Dardel, M. Parameter converting method for bifurcation analysis of nonlinear dynamical systems [Volume 27, Issue 1, 2020, Pages 310-329]
  • Das, D. Quasi-oppositional symbiotic organisms search algorithm for different economic load dispatch problems [Volume 27, Issue 6, 2020, Pages 3096-3117]
  • Das, S.R. Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel [Volume 27, Issue 6, 2020, Pages 2838-2852]
  • DAS, A. Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel [Volume 27, Issue 6, 2020, Pages 2838-2852]
  • Dehestani, M. Effects of recycled polyethylene terephthalate fibers on strength behavior of cemented Babolsar sand [Volume 27, Issue 3, 2020, Pages 1130-1143]
  • Dehestani, M. Near free-edge stresses in FRP-to-concrete bonded joint due to mechanical and thermal loads [Volume 27, Issue 6, 2020, Pages 2727-2739]
  • Dehghan, A.A. Boundary layer and surface pressure distribution behavior over a submarine nose model with two different nose shapes [Volume 27, Issue 3, 2020, Pages 1277-1289]
  • Dehghan, S.M. Seismic Behavior of Chevron Concentrically Braced Frames with Weak Beam [Volume 27, Issue 1, 2020, Pages 41-56]
  • Dehghan Manshadi, M. Boundary layer and surface pressure distribution behavior over a submarine nose model with two different nose shapes [Volume 27, Issue 3, 2020, Pages 1277-1289]
  • DehqanKhalili, H. Effect of distribution patterns of DSM columns on the efficiency of liquefaction mitigation [Volume 27, Issue 5, 2020, Pages 2198-2208]
  • Delafrouz, P. Modeling vibrational behavior of silicon nanowires using accelerated molecular dynamics simulations [Volume 27, Issue 2, 2020, Pages 819-827]
  • Demin, V.I. Economic efficiency of the application of artificial air cooling for normalization of thermal conditions in oil mines [Volume 27, Issue 3, 2020, Pages 1606-1615]
  • Demircioglu Diren, D. Integration of machine learning techniques and control charts in multivariate processes [Volume 27, Issue 6, 2020, Pages 3233-3241]
  • Derakhshandi, M. Static performance of geosynthetic reinforced soil walls with peripheral soil-cement mixtures [Volume 27, Issue 3, 2020, Pages 1028-1038]
  • Dilshad Ansari, M. On accuracy function and distance measures of interval-valued Pythagorean fuzzy sets with application to decision making [Volume 27, Issue 4, 2020, Pages 2127-2139]
  • Dowell, E. Novel technique for dynamic analysis of shear frames based on energy balance equations [Volume 27, Issue 3, 2020, Pages 1091-1112]
  • Drioli, E. Preparation of Pt-ZSM-5 zeolite membrane catalysts for the isomerization of linear alkane [Volume 27, Issue 3, 2020, Pages 1243-1252]
  • Dumitriu, M. Numerical study of the in uence of suspended equipment on ride comfort in high-speed railway vehicles [Volume 27, Issue 4, 2020, Pages 1897-1915]

E

  • Ebadi Jalal, F. DNA sequencing based on physical properties at single nucleotide resolution [Volume 27, Issue 5, 2020, Pages 2364-2371]
  • Edeskär, T. Mechanical properties of soft tailings from different depths of a Swedish tailings dam: Results from triaxial tests [Volume 27, Issue 3, 2020, Pages 1066-1074]
  • Edvardsson, B. Inventory model optimization revisited: Understanding service inventories to improve performance [Volume 27, Issue 3, 2020, Pages 1572-1592]
  • Eftekhari, M. ML-CK-ELM: An efficient multi-layer extreme learning machine using combined kernels for multi-label classification [Volume 27, Issue 6, 2020, Pages 3005-3018]
  • Eftekhari-Sis, B. N-(2-pyridylmethyl)-L-histidine functionalized Fe3O4 magnetic nanoparticles as an efficient catalyst for synthesis of β-amino ketones [Volume 27, Issue 3, 2020, Pages 1207-1215]
  • Ehghaghi, B. Inverse Design of a Centrifugal Pump on the Meridional Plane Using Ball-Spine Algorithm [Volume 27, Issue 5, 2020, Pages 2478-2488]
  • Ehghaghi, M. The study of cavitation phenomenon in multistage centrifugal pump and reduction of its damages [Volume 27, Issue 3, 2020, Pages 1339-1348]
  • Ehsan, M. Medium-term planning of vehicle-to-grid aggregators for providing frequency regulation service [Volume 27, Issue 3, 2020, Pages 1413-1423]
  • Ekici, M. Optical solitons in birefringent fibers with four-wave mixing by extended trial equation method [Volume 27, Issue 6, 2020, Pages 3035-3052]
  • Eldogan, O. Modeling, control, and simulation of a SCARA PRR-type robot manipulator [Volume 27, Issue 1, 2020, Pages 330-340]
  • Elyasi, N. Hyperelastic modeling of sino-nasal tissue for haptic neurosurgery simulation [Volume 27, Issue 3, 2020, Pages 1266-1276]
  • Entezami, A. Improving feature extraction via time series modeling for structural health monitoring based on unsupervised learning methods [Volume 27, Issue 3, 2020, Pages 1001-1018]
  • Ercetin, Ali Powder metallurgy Mg-Sn alloys: Production and characterization [Volume 27, Issue 3, 2020, Pages 1255-1265]
  • Erkan, E.F. Fuzzy cognitive mapping approach to the assessment of Industry 4.0 tendency [Volume 27, Issue 5, 2020, Pages 2635-2643]
  • Esfandiari, N. Gas separation properties of polyacrylonitrilepolysulfone-iron oxide nanocomposite membrane [Volume 27, Issue 3, 2020, Pages 1264-1274]
  • Eshghi, K. A framework for Earthquake Emergency Response in Iran [Volume 27, Issue 5, 2020, Pages 2604-2620]
  • Eshghi, S. A framework for Earthquake Emergency Response in Iran [Volume 27, Issue 5, 2020, Pages 2604-2620]
  • Eshrat Abadi, F. Technical and economic considerations for the application of permanent magnet brushless motors in evaporative water coolers [Volume 27, Issue 6, 2020, Pages 3204-3217]
  • Eslahi, Niloofar Electrospinning of smart thermochromic nanofibers as sensors [Volume 27, Issue 6, 2020, Pages 3447-3453]
  • Esmaeili, M. Optimization of embedded rail slab track with respect to environmental vibrations [Volume 27, Issue 2, 2020, Pages 529-540]
  • Esmaeili, S. Voltage and reactive power control in a distribution network considering optimal network configuration and voltage security constraints [Volume 27, Issue 3, 2020, Pages 1481-1493]
  • Estekanchi, H.E. Application of endurance time method in seismic analysis of bridges [Volume 27, Issue 4, 2020, Pages 1751-1761]
  • Estekanchi, H.E. Optimal objective function for simulating endurance time excitations [Volume 27, Issue 4, 2020, Pages 1728-1739]
  • Eydi, A. Reliable hierarchical multimodal hub location problem: Models and Lagrangian relaxation algorithm [Volume 27, Issue 3, 2020, Pages 1525-1543]
  • Eydi, A. Multi-period configuration of forward and reverse integrated supply chain networks through transport mode [Volume 27, Issue 2, 2020, Pages 935-955]
  • Eyvazi, M. An effective league championship algorithm for the stochastic multi-period portfolio optimization problem [Volume 27, Issue 2, 2020, Pages 829-845]

F

  • Faez, R. Spaser Based on Graphene Tube [Volume 27, Issue 6, 2020, Pages 3084-3095]
  • Fakouri Hasanabadi, M. Pulsed Nd: YAG laser dissimilar welding of Ti/Al3105 alloys [Volume 27, Issue 4, 2020, Pages 1982-1994]
  • Fallah Ardeshir, H. Inverse Design of a Centrifugal Pump on the Meridional Plane Using Ball-Spine Algorithm [Volume 27, Issue 5, 2020, Pages 2478-2488]
  • Fallahnezhad, M.S. A POMDP framework to find optimal policy in sustainable maintenance [Volume 27, Issue 3, 2020, Pages 1544-1561]
  • Fanaie, Nader Control of natural frequency of beams using different pre-tensioning cable patterns [Volume 27, Issue 6, 2020, Pages 2752-2774]
  • Farahmand, F. A novel procedure for micromechanical characterization of white matter constituents at various strain rates [Volume 27, Issue 2, 2020, Pages 784-794]
  • Farahmand, F. Hyperelastic modeling of sino-nasal tissue for haptic neurosurgery simulation [Volume 27, Issue 3, 2020, Pages 1266-1276]
  • Farnia, S.M.H. Cracking effects on chloride diffusion and corrosion initiation in RC structures via finite element simulation [Volume 27, Issue 5, 2020, Pages 2301-2315]
  • Farooq, Muhammad Computational analysis of unsteady and steady magnetohydrodynamic radiating nano fluid flows past a slippery stretching sheet immersed in a permeable medium [Volume 27, Issue 6, 2020, Pages 3454-3466]
  • Farshforoush Imani, A. Environmental impact analysis of high-rise buildings for resilient urban development [Volume 27, Issue 4, 2020, Pages 1843-1857]
  • Farsi, M.A. An approximate methodology to simulate combined conduction-radiation heat transfer for multi-layer insulator [Volume 27, Issue 6, 2020, Pages 2924-2932]
  • Farughi, H. Influence of Two Different Producers in a Competitive Location Problem [Volume 27, Issue 5, 2020, Pages 2539-2554]
  • Fatahi, M. On the measurement of transverse shear stress in a rectangular open channel using an optimal Preston tube [Volume 27, Issue 1, 2020, Pages 57-67]
  • Fatemi, Tara Electrospinning of smart thermochromic nanofibers as sensors [Volume 27, Issue 6, 2020, Pages 3447-3453]
  • Fattahi, K. Technology valuation of NTBFs in the field of cleaner production in terms of investors' exibility and uncertainty in public policy [Volume 27, Issue 6, 2020, Pages 3322-3337]
  • Fazayeli, S. Multi-period configuration of forward and reverse integrated supply chain networks through transport mode [Volume 27, Issue 2, 2020, Pages 935-955]
  • Feng, J. Space headway calculation and analysis at turn movement trajectories using hybrid model [Volume 27, Issue 6, 2020, Pages 2669-2679]
  • Firouzi, B. Nonlinear vibration analysis of a partially coated circular microplate under electrostatic actuationpartially coated circular microplate under electrostatic actuation [Volume 27, Issue 2, 2020, Pages 715-729]
  • Fotuhi-Firuzabad, M. Demand response as a complement for wind energy from the viewpoint of system well-being [Volume 27, Issue 3, 2020, Pages 1373-1383]
  • Fu, K. Optimal production inventory decision with learning and fatigue behavioral effects in labor-intensive manufacturing [Volume 27, Issue 2, 2020, Pages 918-934]
  • Furkan Erkan, E. A novel assessment approach to EFQM driven institutionalization using integrated fuzzy multi-criteria decision-making methods [Volume 27, Issue 2, 2020, Pages 880-892]

G

  • G, Nagaraju Plant-mediated green synthesis of Ag nanoparticles using Rauvolfia tetraphylla (L) flower extracts:Characterization, biological activities, and screening of the catalytic activity in formylation reaction [Volume 27, Issue 6, 2020, Pages 3353-3366]
  • Ganga, B. Comparison of disparate solid volume fraction ratios of hybrid nanofluids flow over a permeable flat surface with aligned magnetic field and Marangoni convection [Volume 27, Issue 6, 2020, Pages 3367-3380]
  • Ganjavi, B. Modified seismic design lateral force distribution for the Performance-Based Plastic Design (PBPD) of steel moment structures considering soil flexibility [Volume 27, Issue 3, 2020, Pages 1050-1065]
  • Ganji, B. Instantaneous thrust control of linear switched reluctance motors with segmental translator [Volume 27, Issue 6, 2020, Pages 3140-3149]
  • Garg, H. Extended TOPSIS method for multi-criteria group decision-making problems under cubic intuitionistic fuzzy environment [Volume 27, Issue 1, 2020, Pages 396-410]
  • Garg, R. Asymmetrical fuzzy logic control-based MPPT algorithm for stand-alone photovoltaic systems under partially shaded conditions [Volume 27, Issue 6, 2020, Pages 3162-3174]
  • Gautam, P. Investigating the effect of learning on setup cost in imperfect production systems using two-way inspection plan for rework under screening constraints [Volume 27, Issue 6, 2020, Pages 3265-3288]
  • Gerami, M. Collapse assessment of protected steel moment frame under post-earthquake fire [Volume 27, Issue 6, 2020, Pages 2775-2789]
  • Ghaemian, M. Uncertainty quantification in seismic collapse assessment of the Iranian code-conforming RC buildings [Volume 27, Issue 4, 2020, Pages 1786-1802]
  • Ghaffari, A. Series solution of slip ow of Al2O3 and Fe3O4 nanoparticles in a horizontal channel with a porous medium by using least square and Galerkin methods [Volume 27, Issue 5, 2020, Pages 2465-2477]
  • Ghaffari, E. Application of endurance time method in seismic analysis of bridges [Volume 27, Issue 4, 2020, Pages 1751-1761]
  • Ghafouri, H. Multi-period configuration of forward and reverse integrated supply chain networks through transport mode [Volume 27, Issue 2, 2020, Pages 935-955]
  • Ghalandarzadeh, A. Effect of distribution patterns of DSM columns on the efficiency of liquefaction mitigation [Volume 27, Issue 5, 2020, Pages 2198-2208]
  • Ghandali, R. A POMDP framework to find optimal policy in sustainable maintenance [Volume 27, Issue 3, 2020, Pages 1544-1561]
  • Ghandil, M. Effects of seismic pounding between adjacent structures considering structure-soil-structure interaction [Volume 27, Issue 5, 2020, Pages 2230-2246]
  • Ghanooni-bagha, M. Cracking effects on chloride diffusion and corrosion initiation in RC structures via finite element simulation [Volume 27, Issue 5, 2020, Pages 2301-2315]
  • Gharibavi, M. Effect of hygro-thermal loading on the two-dimensional response of a functionally graded piezomagnetic cylinder under asymmetric loads [Volume 27, Issue 4, 2020, Pages 1916-1932]
  • Ghasemi, H. Fatigue and fracture behavior of A516 steel used in thick-walled pressure vessels [Volume 27, Issue 6, 2020, Pages 2902-2914]
  • Ghasemi, Sh. S. An evaluation of inventory systems via an evidence theory for deteriorating items under uncertain conditions and advanced payment [Volume 27, Issue 6, 2020, Pages 3338-3351]
  • Ghasemi Toudeshki, H. The application of multivariate analysis approaches to designing NSBM model considering undesirable variable and shared resources [Volume 27, Issue 2, 2020, Pages 893-917]
  • Ghashghaei, H. A game theoretic approach to coordination of pricing, ordering, and co-op advertising in supply chains with stochastic demand [Volume 27, Issue 6, 2020, Pages 3289-3304]
  • Ghayeni, M. Vapor solidification of saturated air in two-dimensional stagnation flow [Volume 27, Issue 2, 2020, Pages 693-703]
  • Ghodrati Amiri, G. Modified seismic design lateral force distribution for the Performance-Based Plastic Design (PBPD) of steel moment structures considering soil flexibility [Volume 27, Issue 3, 2020, Pages 1050-1065]
  • Ghojogh, B. Recognizing involuntary actions from 3D skeleton data using body states [Volume 27, Issue 3, 2020, Pages 1424-1436]
  • Gholami, H.R. Mathematical models and an elephant herding optimization for multiprocessor-task flexible flow shop scheduling problems in the Manufacturing Resource Planning (MRPII) system [Volume 27, Issue 3, 2020, Pages 1562-1571]
  • Gholamian, M.R. A bi-objective hierarchical hub location model with facility failure [Volume 27, Issue 4, 2020, Pages 2009-2020]
  • Gholamian, M.R. A novel selective clustering framework for appropriate labeling of clusters based on K-means algorithm [Volume 27, Issue 5, 2020, Pages 2621-2634]
  • Gholamrezatabar, A. Modified seismic design lateral force distribution for the Performance-Based Plastic Design (PBPD) of steel moment structures considering soil flexibility [Volume 27, Issue 3, 2020, Pages 1050-1065]
  • Ghorbani, A. Preparation of Pt-ZSM-5 zeolite membrane catalysts for the isomerization of linear alkane [Volume 27, Issue 3, 2020, Pages 1243-1252]
  • Ghorbani, E. A review on SPT-based liquefaction potential evaluation to assess the possibility of performing a risk management [Volume 27, Issue 2, 2020, Pages 639-656]
  • Gitinavard, H. Project safety evaluation by a new soft computing approach-based last aggregation hesitant fuzzy complex proportional assessment in construction industry [Volume 27, Issue 2, 2020, Pages 983-1000]
  • Gitizadeh, M. High-accuracy power sharing in parallel inverters in an islanded microgrid using modified sliding mode control approach [Volume 27, Issue 6, 2020, Pages 3128-3139]
  • Golzari, A. Vibrational analysis of fullerene hydrides using AIREBO potential [Volume 27, Issue 4, 2020, Pages 1933-1944]
  • Gorginpour, H. Design modifications for improving modulation flux capability of consequent-pole vernier-PM machine in comparison to conventional vernier-PM machines [Volume 27, Issue 6, 2020, Pages 3150-3161]
  • Gorji Ashtiani, M. A mathematical model for competitive location problem with product selection [Volume 27, Issue 4, 2020, Pages 2157-2176]
  • Grinchar, N.G. Analysis of change in the state of hydraulic drive of machines in operation according to the diagnostic results [Volume 27, Issue 1, 2020, Pages 295-301]
  • Guo, R. Analysis of influencing factors on rutting resistance of stone matrix asphalt mixtures [Volume 27, Issue 3, 2020, Pages 1039-1049]
  • Gupta, T. Assessment of Mechanical and Durability Properties of Concrete Containing PET Waste [Volume 27, Issue 1, 2020, Pages 1-9]
  • Gurdal, O. Design and optimization of tubular linear permanent-magnet generator with performance improvement using response surface methodology and multi-objective genetic algorithm [Volume 27, Issue 6, 2020, Pages 3053-3065]

H

  • Haddad, Sh. Size dependent analysis of tapered FG micro-bridge based on a 3D beam theory [Volume 27, Issue 6, 2020, Pages 2889-2901]
  • Hadhoud, A.R. A septic B-spline collocation method for solving nonlinear singular boundary value problems arising in physiological models [Volume 27, Issue 3, 2020, Pages 1674-1874]
  • Hadi-Vencheh, A. Weight determination and ranking priority in interval group MCDM [Volume 27, Issue 6, 2020, Pages 3242-3252]
  • Hadjimolana, SM. Supply chain reconfiguration for new product development through risk management approach [Volume 27, Issue 4, 2020, Pages 2108-2126]
  • Haeri, A. A novel selective clustering framework for appropriate labeling of clusters based on K-means algorithm [Volume 27, Issue 5, 2020, Pages 2621-2634]
  • Haeri, A. A genetic algorithm-based framework for mining quantitative association rules without specifying minimum support and minimum confidence [Volume 27, Issue 3, 2020, Pages 1316-1332]
  • Haghighi, H. Constructing automated test oracle for low observable software [Volume 27, Issue 3, 2020, Pages 1333-1351]
  • Haghighi, H. Macrophage+: A game with a purpose for applying human intelligence in control mechanisms [Volume 27, Issue 6, 2020, Pages 2985-3004]
  • Haghighi, M. Preparation of Pt-ZSM-5 zeolite membrane catalysts for the isomerization of linear alkane [Volume 27, Issue 3, 2020, Pages 1243-1252]
  • Haghpanahi, M. Investigating the effects of impact directions on improving head injury index [Volume 27, Issue 4, 2020, Pages 1867-1877]
  • Hajialilue-Bonab, M. Soil behavior around the stub abutment of an integral bridge and buried piles in the contraction state [Volume 27, Issue 1, 2020, Pages 88-104]
  • Hajiani Boushehrian, A. Experimental behavior of circular foundations on oil contaminated sand [Volume 27, Issue 1, 2020, Pages 80-87]
  • Hajiannia, A. Mitigating the uneven settlement of nearby strip footings on loose saturated sand using concrete pedestals: A model test study [Volume 27, Issue 3, 2020, Pages 1162-1175]
  • Hajiazizi, M. Optimal location of stone column for stabilization of sand slope: An experimental and 3D numerical investigation [Volume 27, Issue 1, 2020, Pages 105-116]
  • Hajihosseini, Z. A joint determination of production cycle length, maintenance policy, and control chart parameters considering time value of money under stochastic shift size [Volume 27, Issue 1, 2020, Pages 427-447]
  • Halimi Khosroshahi, H. Effect of welding parameters on dissimilar pulsed laser joint between nickel-based alloy Hastelloy X and austenitic stainless steel AISI 304L [Volume 27, Issue 5, 2020, Pages 2443-2450]
  • Halvaei Niasar, A. Combination of Marx generator and capacitor diode voltage multiplier for pulsed power applications [Volume 27, Issue 3, 2020, Pages 1506-1514]
  • Halvaei Niasar, A. Technical and economic considerations for the application of permanent magnet brushless motors in evaporative water coolers [Volume 27, Issue 6, 2020, Pages 3204-3217]
  • Hamid, M. The stage shop scheduling problem: lower bound and metaheuristic [Volume 27, Issue 2, 2020, Pages 862-879]
  • Hamonangan Harahap, I.S.. Damage detection in frame structures using noisy accelerometers and Damage Load Vectors (DLV) [Volume 27, Issue 4, 2020, Pages 1776-1785]
  • Hamzehei-Javaran, S. Utilizing new spherical Hankel shape functions to reformulate the deflection, free vibration, and buckling analysis of Mindlin plates based on finite element method [Volume 27, Issue 5, 2020, Pages 2209-2229]
  • Harati, M. Analytical model of the influence of recirculation on premixed combustion of lycopodium dust particles: A study of thermal resistance and random distribution of particles [Volume 27, Issue 5, 2020, Pages 2353-2363]
  • Hariri-Ardebili, M.A. Uncertainty quantification in seismic collapse assessment of the Iranian code-conforming RC buildings [Volume 27, Issue 4, 2020, Pages 1786-1802]
  • Hashemi, S.Sh. Evaluation of the response modification factor of RC structures constructed with bubble deck system [Volume 27, Issue 4, 2020, Pages 1699-1713]
  • Hasnain, J. Series solution of slip ow of Al2O3 and Fe3O4 nanoparticles in a horizontal channel with a porous medium by using least square and Galerkin methods [Volume 27, Issue 5, 2020, Pages 2465-2477]
  • Hassanzadeh, M. N. Demand response as a complement for wind energy from the viewpoint of system well-being [Volume 27, Issue 3, 2020, Pages 1373-1383]
  • Hayat, T. Novel aspects of Soret and Dufour in entropy generation minimization for Williamson fluid flow [Volume 27, Issue 5, 2020, Pages 2451-2464]
  • Hayat, Tasawar Entropy generation analysis of peristaltic flow of magneto-nanoparticles suspended in water under second-order slip conditions [Volume 27, Issue 6, 2020, Pages 3434-3446]
  • Hayat, Tasawar Importance of activation energy and heat source on nanoliquid flow with gyrotactic microorganisms [Volume 27, Issue 6, 2020, Pages 3381-3389]
  • Hayat, Tasawar Modeling for radiated Marangoni convection flow of magneto-nanoliquid subject to activation energy and chemical reaction [Volume 27, Issue 6, 2020, Pages 3390-3398]
  • Hegazy, T. Attitude-Based Conflict Management for Resolving Disputes over Water Quality of the Seymareh River in Iran [Volume 27, Issue 1, 2020, Pages 25-40]
  • Heidari, A. Collapse of reticulated domes: A case study of Talakan oil tank [Volume 27, Issue 5, 2020, Pages 2177-2188]
  • Hekmatzadeh, A.A. Lattice Boltzmann solution of advection- dominated mass transport problem: A comparison [Volume 27, Issue 2, 2020, Pages 625-638]
  • Hezavehi, E. The experimental assessment of the effect of polypropylene fibers on the improvement of nano-silica concrete behavior [Volume 27, Issue 2, 2020, Pages 682-692]
  • Hipel, K.W. Attitude-Based Conflict Management for Resolving Disputes over Water Quality of the Seymareh River in Iran [Volume 27, Issue 1, 2020, Pages 25-40]
  • Homayoon, S. Gas separation properties of polyacrylonitrilepolysulfone-iron oxide nanocomposite membrane [Volume 27, Issue 3, 2020, Pages 1264-1274]
  • Hooshangi, H. Seismic Behavior of Chevron Concentrically Braced Frames with Weak Beam [Volume 27, Issue 1, 2020, Pages 41-56]
  • Hooshangi Shayesteh, M. Drinking water softening with electrocoagulation process: Influence of direct and alternating currents as inductive with different arrangement rod electrodes and polarity inverter [Volume 27, Issue 3, 2020, Pages 1275-1292]
  • Horpibulsuk, S. Sustainable use of stabilized flood mud as subgrade soil for low volume traffic roads [Volume 27, Issue 6, 2020, Pages 2719-2726]
  • Hoseini, S.A. Uncertainty quantification in seismic collapse assessment of the Iranian code-conforming RC buildings [Volume 27, Issue 4, 2020, Pages 1786-1802]
  • Hoseini Vaez, S.R. Pulse extraction of pulse-like ground motions based on particle swarm optimization algorithm [Volume 27, Issue 1, 2020, Pages 134-158]
  • Hosseini, S.A.A. Nonlinear vibration analysis of a partially coated circular microplate under electrostatic actuationpartially coated circular microplate under electrostatic actuation [Volume 27, Issue 2, 2020, Pages 715-729]
  • Hosseini, V. Modeling particle deposition in the respiratory system during successive respiratory cycles [Volume 27, Issue 1, 2020, Pages 215-228]
  • Hosseinzadeh Lotfi, F. The application of multivariate analysis approaches to designing NSBM model considering undesirable variable and shared resources [Volume 27, Issue 2, 2020, Pages 893-917]
  • Hosseinzadeh Lotfi, F. An effective solution approach to multi-objective fractional fixed charge problem with fuzzy parameters [Volume 27, Issue 4, 2020, Pages 2057-2068]
  • Hossieni, M. M. Improving heat transfer in a triplex tube heat exchanger containing phase-change materials by modifications of length and position of fins [Volume 27, Issue 1, 2020, Pages 239-251]
  • Hoursan, H. A novel procedure for micromechanical characterization of white matter constituents at various strain rates [Volume 27, Issue 2, 2020, Pages 784-794]
  • Hu, J.W. Seismic evaluation of special steel moment frames subjected to near-field earthquakes with forward directivity by considering soil-structure interaction effects [Volume 27, Issue 5, 2020, Pages 2264-2282]
  • Hu, X. Applying a change-point control chart based on likelihood ratio to supply chain network monitoring [Volume 27, Issue 5, 2020, Pages 2529-2538]
  • Hussain, Sabir Computational analysis of unsteady and steady magnetohydrodynamic radiating nano fluid flows past a slippery stretching sheet immersed in a permeable medium [Volume 27, Issue 6, 2020, Pages 3454-3466]
  • Husseinzadeh Kashan, A. Optimizing decisions on under- and out-of-warranty products in a finite planning horizon [Volume 27, Issue 1, 2020, Pages 494-515]
  • Husseinzadeh Kashan, A. An effective league championship algorithm for the stochastic multi-period portfolio optimization problem [Volume 27, Issue 2, 2020, Pages 829-845]

I

  • Ibrahim, N.A. Sustainable use of stabilized flood mud as subgrade soil for low volume traffic roads [Volume 27, Issue 6, 2020, Pages 2719-2726]
  • Ibrahim, Z. Water flow stabilization using submerged weir for draft-tube reaction hydraulic turbine [Volume 27, Issue 1, 2020, Pages 159-176]
  • Ijaz Khan, M. Novel aspects of Soret and Dufour in entropy generation minimization for Williamson fluid flow [Volume 27, Issue 5, 2020, Pages 2451-2464]
  • Indumathi, N. Comparison of disparate solid volume fraction ratios of hybrid nanofluids flow over a permeable flat surface with aligned magnetic field and Marangoni convection [Volume 27, Issue 6, 2020, Pages 3367-3380]
  • Iranmanesh, M. A. An endochronic- based approach to simulating pore water pressure variation during liquefaction of sand [Volume 27, Issue 2, 2020, Pages 541-550]
  • Ishaqian, M. Performance of CFRP Confined Pultruded GFRP-Concrete Composite Columns Subjected to Cyclic and Monotonic Compressive Loading [Volume 27, Issue 4, 2020, Pages 1685-1698]
  • Izadi, A. Continuous slip surface method for stability analysis of heterogeneous vertical trenches [Volume 27, Issue 6, 2020, Pages 2657-2668]

J

  • Jafarian, Y. Mitigating the uneven settlement of nearby strip footings on loose saturated sand using concrete pedestals: A model test study [Volume 27, Issue 3, 2020, Pages 1162-1175]
  • Jafari Mansoorian, H. Drinking water softening with electrocoagulation process: Influence of direct and alternating currents as inductive with different arrangement rod electrodes and polarity inverter [Volume 27, Issue 3, 2020, Pages 1275-1292]
  • Jafarzadeh, F. Effect of stress direction on the undrained monotonic and cyclic behavior of dense sands [Volume 27, Issue 2, 2020, Pages 551-565]
  • Jafarzadeh, F. A vacuum-refilled tensiometer for deep monitoring of in-situ pore water pressure [Volume 27, Issue 2, 2020, Pages 596-606]
  • Jaggi, C.K. Investigating the effect of learning on setup cost in imperfect production systems using two-way inspection plan for rework under screening constraints [Volume 27, Issue 6, 2020, Pages 3265-3288]
  • Jain, A. Assessment of Mechanical and Durability Properties of Concrete Containing PET Waste [Volume 27, Issue 1, 2020, Pages 1-9]
  • Jain, H. Experimental evaluation of solar integrated water heater [Volume 27, Issue 4, 2020, Pages 1878-1885]
  • Jaksic, B. A new aspect of transition between line and continuous spectrum and its relation to seismic in influence on structures [Volume 27, Issue 3, 2020, Pages 1515-1524]
  • Jalayerian Darbandi, A. Fatigue and fracture behavior of A516 steel used in thick-walled pressure vessels [Volume 27, Issue 6, 2020, Pages 2902-2914]
  • Jalili Sadr Abad, M. Novel technique for dynamic analysis of shear frames based on energy balance equations [Volume 27, Issue 3, 2020, Pages 1091-1112]
  • Jamshidi, A. Weight determination and ranking priority in interval group MCDM [Volume 27, Issue 6, 2020, Pages 3242-3252]
  • Jamshidi, H. Freight modal policies toward a sustainable society [Volume 27, Issue 6, 2020, Pages 2690-2703]
  • Jamshidi Chenari, R. Continuous slip surface method for stability analysis of heterogeneous vertical trenches [Volume 27, Issue 6, 2020, Pages 2657-2668]
  • Jana, C. Trapezoidal neutrosophic aggregation operators and their application to the multi-attribute decision-making process [Volume 27, Issue 3, 2020, Pages 1655-1673]
  • Janosevic, D. Optimization of manipulator drive mechanisms of hydraulic excavators on the basis of the tribological criterion [Volume 27, Issue 5, 2020, Pages 2372-2381]
  • Javadpour, S. Modeling the CO gas response of PEDOT:PSS/Fe(salen) thin film for a gas sensor [Volume 27, Issue 3, 2020, Pages 1227-1233]
  • Javdanian, H. A regression-based approach to the prediction of crest settlement of embankment dams under earthquake shaking [Volume 27, Issue 2, 2020, Pages 671-681]
  • Javidi, R. Numerical study of insulation structure characteristics and arrangement effects on cell trapping using alternative current insulating based dielectrophoresis [Volume 27, Issue 3, 2020, Pages 1302-1312]
  • Jena, S. P. Fault detection in cracked structures under moving load through a recurrent-neural-networks-based approach [Volume 27, Issue 4, 2020, Pages 1886-1896]
  • Jia, B. Effects of content and thickness on the microstructure as well as optical and electrical properties of oxidized Al-doped ZnO Films [Volume 27, Issue 3, 2020, Pages 1019-1027]
  • Joladarashi, S. Comparative study of damage behavior of synthetic and natural fiber-reinforced brittle composite and natural fiber-reinforced flexible composite subjected to low-velocity impact [Volume 27, Issue 1, 2020, Pages 341-349]
  • Jovanović, V. Optimization of manipulator drive mechanisms of hydraulic excavators on the basis of the tribological criterion [Volume 27, Issue 5, 2020, Pages 2372-2381]

K

  • Kabir, M.Z. Numerical modeling of a new reinforced masonry system subjected to in-plane cyclic loading [Volume 27, Issue 6, 2020, Pages 2790-2807]
  • Kaheh, Z. A solution based on fuzzy max-min approach to the bi-level programming model of energy and exiramp procurement in day-ahead market [Volume 27, Issue 2, 2020, Pages 846-861]
  • Kalantarinejad, R. Investigating the effects of impact directions on improving head injury index [Volume 27, Issue 4, 2020, Pages 1867-1877]
  • Kamanli, A.F. A Novel Inductive Tactile Probe Design for Lump Detection in Soft Tissue Phantoms [Volume 27, Issue 6, 2020, Pages 3118-3127]
  • Kamyab Farahbakhsh, H. Continuous slip surface method for stability analysis of heterogeneous vertical trenches [Volume 27, Issue 6, 2020, Pages 2657-2668]
  • Kannojiya, V. Assessment of optimum slurry pipe design for minimum erosion [Volume 27, Issue 5, 2020, Pages 2409-2418]
  • Kapitonov, I.A. Economic evaluation of energy-efficient engineering systems [Volume 27, Issue 5, 2020, Pages 2283-2300]
  • Karaaslan, F. Trapezoidal neutrosophic aggregation operators and their application to the multi-attribute decision-making process [Volume 27, Issue 3, 2020, Pages 1655-1673]
  • Karakoc, S.B.G. A new numerical application of the generalized Rosenau-RLW equation [Volume 27, Issue 2, 2020, Pages 772-783]
  • Karamodin, A. Improving feature extraction via time series modeling for structural health monitoring based on unsupervised learning methods [Volume 27, Issue 3, 2020, Pages 1001-1018]
  • Karamodin, A. Investigating the behavior factor of coupled concrete shear walls with steel coupling beam [Volume 27, Issue 5, 2020, Pages 2189-2197]
  • Karimaei Tabarestani, M. Riprap design at bridge piers with limited scouring [Volume 27, Issue 2, 2020, Pages 588-595]
  • Karimi, H. Collapse of reticulated domes: A case study of Talakan oil tank [Volume 27, Issue 5, 2020, Pages 2177-2188]
  • Karimzadeh, R. Effect of distribution patterns of DSM columns on the efficiency of liquefaction mitigation [Volume 27, Issue 5, 2020, Pages 2198-2208]
  • Karpychev, V.A. A. Analysis of change in the state of hydraulic drive of machines in operation according to the diagnostic results [Volume 27, Issue 1, 2020, Pages 295-301]
  • Kassaei, S.I. TF/TA optimal Flight trajectory planning using a novel regenerative flattener mapping method [Volume 27, Issue 3, 2020, Pages 1324-1338]
  • Kaur, G. Extended TOPSIS method for multi-criteria group decision-making problems under cubic intuitionistic fuzzy environment [Volume 27, Issue 1, 2020, Pages 396-410]
  • Kaveh, A. Simultaneous analysis and optimal design of truss structures via displacement method [Volume 27, Issue 3, 2020, Pages 1176-1186]
  • Kaveh, A. Chaotic vibrating particles system for resource-constrained project scheduling problem [Volume 27, Issue 4, 2020, Pages 1826-1842]
  • Kaveh, A. Smart-home electrical energy scheduling system using multi-objective antlion optimizer and evidential reasoning [Volume 27, Issue 1, 2020, Pages 177-201]
  • Kazemi, M. Medium-term planning of vehicle-to-grid aggregators for providing frequency regulation service [Volume 27, Issue 3, 2020, Pages 1413-1423]
  • Kebriaei, M. Combination of Marx generator and capacitor diode voltage multiplier for pulsed power applications [Volume 27, Issue 3, 2020, Pages 1506-1514]
  • Keerio, M. A. A new approach to improving durability of rice husk ash blended concrete with re-dispersible polymer powder [Volume 27, Issue 4, 2020, Pages 1858-1865]
  • Keerio, M.A. Suitability of brick kiln waste as a stabilizer for clayey soils [Volume 27, Issue 5, 2020, Pages 2258-2263]
  • Keramati, A. Performance of CFRP Confined Pultruded GFRP-Concrete Composite Columns Subjected to Cyclic and Monotonic Compressive Loading [Volume 27, Issue 4, 2020, Pages 1685-1698]
  • Kermani, M. Effects of seismic pounding between adjacent structures considering structure-soil-structure interaction [Volume 27, Issue 5, 2020, Pages 2230-2246]
  • Keshavarz, A. Gene expression programming models for liquefaction-induced lateral spreading [Volume 27, Issue 6, 2020, Pages 2704-2718]
  • Keshavarzi, H. Lattice Boltzmann solution of advection- dominated mass transport problem: A comparison [Volume 27, Issue 2, 2020, Pages 625-638]
  • Ketabi, A. Combination of Marx generator and capacitor diode voltage multiplier for pulsed power applications [Volume 27, Issue 3, 2020, Pages 1506-1514]
  • Khademalrasoul, A. Estimation of mixed-mode fracture parameters by gene expression programming [Volume 27, Issue 1, 2020, Pages 229-238]
  • Khademghaeiny, Gh. Riprap design at bridge piers with limited scouring [Volume 27, Issue 2, 2020, Pages 588-595]
  • Khademiyan, S.M. The variable step-size wavelet transform-domain LMS adaptive filter algorithm [Volume 27, Issue 3, 2020, Pages 1398-1412]
  • Khanjani, N. Drinking water softening with electrocoagulation process: Influence of direct and alternating currents as inductive with different arrangement rod electrodes and polarity inverter [Volume 27, Issue 3, 2020, Pages 1275-1292]
  • Khanna, A. Investigating the effect of learning on setup cost in imperfect production systems using two-way inspection plan for rework under screening constraints [Volume 27, Issue 6, 2020, Pages 3265-3288]
  • Khatibinia, M. Seismic evaluation of special steel moment frames subjected to near-field earthquakes with forward directivity by considering soil-structure interaction effects [Volume 27, Issue 5, 2020, Pages 2264-2282]
  • Khayati, Gholam Reza Prediction of the size of silver nanoparticles prepared via green synthesis: A gene expression programming approach [Volume 27, Issue 6, 2020, Pages 3399-3411]
  • Khayyat, M. Experimental investigation of the effect of one-dimensional roughened surface on the pool boiling of nanofluids [Volume 27, Issue 6, 2020, Pages 2954-2966]
  • Kheyroddin, A. Structural control of RC buildings subjected to near-fault ground motions in terms of tuned mass dampers [Volume 27, Issue 1, 2020, Pages 122-133]
  • Khosravi, A. Sensitivity analysis of economic variables using neuro-fuzzy approach [Volume 27, Issue 3, 2020, Pages 1352-1359]
  • Khosrobeigi, Z. A rule-based post-processing approach to improve Persian OCR performance [Volume 27, Issue 6, 2020, Pages 3019-3033]
  • Khosrogorji, S. Optimal sizing of hybrid WT/PV/diesel generator/battery system using MINLP method for a region in Kerman [Volume 27, Issue 6, 2020, Pages 3066-3074]
  • Kiani, A. Structural control of RC buildings subjected to near-fault ground motions in terms of tuned mass dampers [Volume 27, Issue 1, 2020, Pages 122-133]
  • Kiani, S. Economic evaluation of investment projects under uncertainty: A probability theory perspective [Volume 27, Issue 1, 2020, Pages 448-468]
  • Kiraz, A. A novel assessment approach to EFQM driven institutionalization using integrated fuzzy multi-criteria decision-making methods [Volume 27, Issue 2, 2020, Pages 880-892]
  • Kiraz, A. Fuzzy cognitive mapping approach to the assessment of Industry 4.0 tendency [Volume 27, Issue 5, 2020, Pages 2635-2643]
  • Kishore, A. Investigating the effect of learning on setup cost in imperfect production systems using two-way inspection plan for rework under screening constraints [Volume 27, Issue 6, 2020, Pages 3265-3288]
  • Knutsson, R. Mechanical properties of soft tailings from different depths of a Swedish tailings dam: Results from triaxial tests [Volume 27, Issue 3, 2020, Pages 1066-1074]
  • Knutsson, S. Mechanical properties of soft tailings from different depths of a Swedish tailings dam: Results from triaxial tests [Volume 27, Issue 3, 2020, Pages 1066-1074]
  • Kokabi, A. H. Pulsed Nd: YAG laser dissimilar welding of Ti/Al3105 alloys [Volume 27, Issue 4, 2020, Pages 1982-1994]
  • Kolahan, F. Modeling and optimization of the electrical discharge machining process based on a combined artificial neural network and particle swarm optimization algorithm [Volume 27, Issue 3, 2020, Pages 1206-1217]
  • Kong, H.-S. Usability of arc fault circuit interrupters with network function [Volume 27, Issue 2, 2020, Pages 607-613]
  • Kong, H.S. Improvement in the structure of fire alarm systems' alarm bell stop switch [Volume 27, Issue 1, 2020, Pages 117-121]
  • Korani, E. Reliable hierarchical multimodal hub location problem: Models and Lagrangian relaxation algorithm [Volume 27, Issue 3, 2020, Pages 1525-1543]
  • Korayem, M. H. Adaptive control of a cable-actuated parallel manipulator mounted on a platform with differential wheels under payload uncertainty [Volume 27, Issue 1, 2020, Pages 273-286]
  • Kordnaeij, A. Prediction of subgrade reaction modulus of clayey soil using group method of data handling [Volume 27, Issue 4, 2020, Pages 1740-1750]
  • Kormiltsev, Y.G. Agricultural tractors of the fifth generation [Volume 27, Issue 2, 2020, Pages 745-756]
  • Kosari, A. TF/TA optimal Flight trajectory planning using a novel regenerative flattener mapping method [Volume 27, Issue 3, 2020, Pages 1324-1338]
  • Kruk, M.N. Economic efficiency of the application of artificial air cooling for normalization of thermal conditions in oil mines [Volume 27, Issue 3, 2020, Pages 1606-1615]
  • Kulkarni, S.M. Comparative study of damage behavior of synthetic and natural fiber-reinforced brittle composite and natural fiber-reinforced flexible composite subjected to low-velocity impact [Volume 27, Issue 1, 2020, Pages 341-349]
  • Kumar, A. Multivariate adaptive regression spline approach to the assessment of surface mean pressure coefficient on surfaces of C-shaped building [Volume 27, Issue 6, 2020, Pages 2967-2984]
  • Kumar, K. Design of mixed flow pump impeller blade using mean streamline theory and its analysis [Volume 27, Issue 1, 2020, Pages 350-360]
  • Kumar, N. Experimental evaluation of solar integrated water heater [Volume 27, Issue 4, 2020, Pages 1878-1885]
  • Kumar, P.B. Intelligent navigation of a self-fabricated biped robot using a regression controller [Volume 27, Issue 1, 2020, Pages 262-272]
  • Kumar, S. Assessment of optimum slurry pipe design for minimum erosion [Volume 27, Issue 5, 2020, Pages 2409-2418]
  • Kumar, T. On accuracy function and distance measures of interval-valued Pythagorean fuzzy sets with application to decision making [Volume 27, Issue 4, 2020, Pages 2127-2139]
  • Kumar Sinha, A. A holistic framework for lot sizing problem for fast-moving perishable products [Volume 27, Issue 4, 2020, Pages 2021-2039]

L

  • Lalithamba, H.S. Plant-mediated green synthesis of Ag nanoparticles using Rauvolfia tetraphylla (L) flower extracts:Characterization, biological activities, and screening of the catalytic activity in formylation reaction [Volume 27, Issue 6, 2020, Pages 3353-3366]
  • Lari, K. PM10 and CO dispersion modeling of emissions from four thermal power plants in Mashhad, Iran [Volume 27, Issue 5, 2020, Pages 2433-2442]
  • Lashkar-Ara, B. On the measurement of transverse shear stress in a rectangular open channel using an optimal Preston tube [Volume 27, Issue 1, 2020, Pages 57-67]
  • Latifi, N. Sustainable use of stabilized flood mud as subgrade soil for low volume traffic roads [Volume 27, Issue 6, 2020, Pages 2719-2726]
  • Lee, H.E. Damage detection in frame structures using noisy accelerometers and Damage Load Vectors (DLV) [Volume 27, Issue 4, 2020, Pages 1776-1785]
  • Lesani, M. SCF distribution in FRP-strengthened tubular T-joints under brace axial loading [Volume 27, Issue 3, 2020, Pages 1113-1129]
  • Li, D. Coordination of traditional and online group-buying channels considering website promotion effort [Volume 27, Issue 4, 2020, Pages 2069-2092]
  • Li, G. Effects of content and thickness on the microstructure as well as optical and electrical properties of oxidized Al-doped ZnO Films [Volume 27, Issue 3, 2020, Pages 1019-1027]
  • Li, L. DEA altruism and exclusiveness cross-efficiency evaluation models [Volume 27, Issue 5, 2020, Pages 2499-2513]
  • Li, T. Coordination of traditional and online group-buying channels considering website promotion effort [Volume 27, Issue 4, 2020, Pages 2069-2092]
  • Li, Y. Innovation and environmental performance: An empirical study of 31 cities in China [Volume 27, Issue 2, 2020, Pages 956-969]
  • Liew, M.S. Damage detection in frame structures using noisy accelerometers and Damage Load Vectors (DLV) [Volume 27, Issue 4, 2020, Pages 1776-1785]
  • Lipkovich, E.I. Agricultural tractors of the fifth generation [Volume 27, Issue 2, 2020, Pages 745-756]
  • Liu, B. Research on the risk assessment method of PPP project based on the improved matter element model [Volume 27, Issue 2, 2020, Pages 614-624]
  • Liu, H. Innovation and environmental performance: An empirical study of 31 cities in China [Volume 27, Issue 2, 2020, Pages 956-969]
  • Liu, S. Effects of content and thickness on the microstructure as well as optical and electrical properties of oxidized Al-doped ZnO Films [Volume 27, Issue 3, 2020, Pages 1019-1027]
  • Liu, Shengjie Evaluation of UV aging behaviors of polyphosphoric acid (PPA) modified asphalt and its asphalt mixture [Volume 27, Issue 5, 2020, Pages 2247-2257]
  • Liu, X. DEA altruism and exclusiveness cross-efficiency evaluation models [Volume 27, Issue 5, 2020, Pages 2499-2513]
  • Lotfi, E. Sensitivity analysis of economic variables using neuro-fuzzy approach [Volume 27, Issue 3, 2020, Pages 1352-1359]
  • Lu, L.C. Innovation and environmental performance: An empirical study of 31 cities in China [Volume 27, Issue 2, 2020, Pages 956-969]

M

  • Madoliat, R. Damage detection in a double-beam system using proper orthogonal decomposition and teaching-learning based algorithm [Volume 27, Issue 2, 2020, Pages 757-771]
  • Mahajan, P. Asymmetrical fuzzy logic control-based MPPT algorithm for stand-alone photovoltaic systems under partially shaded conditions [Volume 27, Issue 6, 2020, Pages 3162-3174]
  • Mahdavi, I. Mathematical modelling of a decentralized multi-echelon supply chain network considering service level under uncertainty [Volume 27, Issue 3, 2020, Pages 1634-1654]
  • Mahdavi-Amiri, N. Mathematical modelling of a decentralized multi-echelon supply chain network considering service level under uncertainty [Volume 27, Issue 3, 2020, Pages 1634-1654]
  • Mahmoodirad, A. An effective solution approach to multi-objective fractional fixed charge problem with fuzzy parameters [Volume 27, Issue 4, 2020, Pages 2057-2068]
  • Mahmoodzadeh, A. A novel fuzzy multi-objective method for supplier selection and order allocation problem using NSGA II [Volume 27, Issue 1, 2020, Pages 481-493]
  • Mahmoud, A. K. Pulsed Nd: YAG laser dissimilar welding of Ti/Al3105 alloys [Volume 27, Issue 4, 2020, Pages 1982-1994]
  • Mahmoudi, M. Novel technique for dynamic analysis of shear frames based on energy balance equations [Volume 27, Issue 3, 2020, Pages 1091-1112]
  • Mahmoudian, M. High-accuracy power sharing in parallel inverters in an islanded microgrid using modified sliding mode control approach [Volume 27, Issue 6, 2020, Pages 3128-3139]
  • Mahmoudzadeh Kani, I. Collapse of reticulated domes: A case study of Talakan oil tank [Volume 27, Issue 5, 2020, Pages 2177-2188]
  • Mahvi, A. H. Drinking water softening with electrocoagulation process: Influence of direct and alternating currents as inductive with different arrangement rod electrodes and polarity inverter [Volume 27, Issue 3, 2020, Pages 1275-1292]
  • Makui, A. A mathematical model for competitive location problem with product selection [Volume 27, Issue 4, 2020, Pages 2157-2176]
  • Malidarreh, N.R. Effects of recycled polyethylene terephthalate fibers on strength behavior of cemented Babolsar sand [Volume 27, Issue 3, 2020, Pages 1130-1143]
  • Mallick, M. Multivariate adaptive regression spline approach to the assessment of surface mean pressure coefficient on surfaces of C-shaped building [Volume 27, Issue 6, 2020, Pages 2967-2984]
  • Mamashli, F. A joint determination of production cycle length, maintenance policy, and control chart parameters considering time value of money under stochastic shift size [Volume 27, Issue 1, 2020, Pages 427-447]
  • Manshaei, M. H. A holistic day-ahead distributed energy management approach: Equilibrium selection for customers' game [Volume 27, Issue 3, 2020, Pages 1437-1449]
  • Mansouri, I. Seismic evaluation of special steel moment frames subjected to near-field earthquakes with forward directivity by considering soil-structure interaction effects [Volume 27, Issue 5, 2020, Pages 2264-2282]
  • Masdari, M. Experimental investigation of shock wave oscillation on a thin supercritical airfoil [Volume 27, Issue 2, 2020, Pages 795-805]
  • Masdari, M. Experimental investigation into the effects of Mach number and boundary-layer bleed on flow stability of a supersonic air intake [Volume 27, Issue 3, 2020, Pages 1197-1205]
  • Mashahir, M. Riprap design at bridge piers with limited scouring [Volume 27, Issue 2, 2020, Pages 588-595]
  • Mashayekhi, M. Optimal objective function for simulating endurance time excitations [Volume 27, Issue 4, 2020, Pages 1728-1739]
  • Masood, F. Novel aspects of Soret and Dufour in entropy generation minimization for Williamson fluid flow [Volume 27, Issue 5, 2020, Pages 2451-2464]
  • Masoudi Nejad, R. Fatigue and fracture behavior of A516 steel used in thick-walled pressure vessels [Volume 27, Issue 6, 2020, Pages 2902-2914]
  • Matin Ghahfarokhi, Z. Developing a deformable model of liver tumor during breathing to improve targeting accuracy in image-guided therapy using finite element simulation [Volume 27, Issue 4, 2020, Pages 1955-1961]
  • Mazloum-Ardakani, Mohammd Electrochemical determination of glutathione in hemolyzed erythrocytes [Volume 27, Issue 6, 2020, Pages 3412-3420]
  • Mehdizadeh, E. Mathematical models and an elephant herding optimization for multiprocessor-task flexible flow shop scheduling problems in the Manufacturing Resource Planning (MRPII) system [Volume 27, Issue 3, 2020, Pages 1562-1571]
  • Mehmood, R. Analytical view of magnetic hydrodynamic rotating flow of Barium Ferrite nano fluid with viscous dissipation [Volume 27, Issue 6, 2020, Pages 3421-3433]
  • Memarzadeh, Gh. Voltage and reactive power control in a distribution network considering optimal network configuration and voltage security constraints [Volume 27, Issue 3, 2020, Pages 1481-1493]
  • Mesgarani, H. The variable step-size wavelet transform-domain LMS adaptive filter algorithm [Volume 27, Issue 3, 2020, Pages 1398-1412]
  • Minaei, Z. Pulse extraction of pulse-like ground motions based on particle swarm optimization algorithm [Volume 27, Issue 1, 2020, Pages 134-158]
  • Mirhosseini, S.M. Effects of recycled polyethylene terephthalate fibers on strength behavior of cemented Babolsar sand [Volume 27, Issue 3, 2020, Pages 1130-1143]
  • Mirhosseini Hezaveh, S. M. The experimental assessment of the effect of polypropylene fibers on the improvement of nano-silica concrete behavior [Volume 27, Issue 2, 2020, Pages 682-692]
  • Mirjalili, B.F. Green one-pot three-component synthesis of 4H-chromenes in the presence of nano-kaoline/BF3/Fe3O4 as a super paramagnetic nanocatalyst [Volume 27, Issue 3, 2020, Pages 1216-1225]
  • Mirrashid, M. Shear strength prediction of RC beams using adaptive neuro-fuzzy inference system [Volume 27, Issue 2, 2020, Pages 657-670]
  • Mirsalari, S. B. Prediction of meteorological and hydrological phenomena in different climatic scenarios in the Karkheh watershed (southwest of Iran) [Volume 27, Issue 4, 2020, Pages 1814-1825]
  • Mirzabeigy, A. Damage detection in a double-beam system using proper orthogonal decomposition and teaching-learning based algorithm [Volume 27, Issue 2, 2020, Pages 757-771]
  • Mirzai, N. Seismic performance of EBFs equipped with an innovative shape memory alloy damper [Volume 27, Issue 5, 2020, Pages 2316-2325]
  • Mirzazadeh, A. An evaluation of inventory systems via an evidence theory for deteriorating items under uncertain conditions and advanced payment [Volume 27, Issue 6, 2020, Pages 3338-3351]
  • Mishra, D.R. Experimental evaluation of solar integrated water heater [Volume 27, Issue 4, 2020, Pages 1878-1885]
  • Mishra, D.R. Experimental evaluation of shape factor of axis-symmetric sunken structures [Volume 27, Issue 6, 2020, Pages 2831-2837]
  • Moallem, M. A holistic day-ahead distributed energy management approach: Equilibrium selection for customers' game [Volume 27, Issue 3, 2020, Pages 1437-1449]
  • Moazemi Goudarzi, A. Numerical and experimental study of the effect of the process parameters on the void evolution in the cold extrusion of rods [Volume 27, Issue 1, 2020, Pages 287-294]
  • Mofid, M. Dynamic response of concrete funicular shells with a rectangular base under impulse loads [Volume 27, Issue 4, 2020, Pages 1714-1727]
  • Mofid, M. Effect of damped outriggers arrangement on the seismic response of high-rise steel structures [Volume 27, Issue 3, 2020, Pages 1075-1090]
  • Mofid, M. An exact solution to the problems of flexo-poroelastic structures rested on elastic beds acted upon by moving loads [Volume 27, Issue 5, 2020, Pages 2326-2341]
  • Moghadasi, H. Analytical model of the influence of recirculation on premixed combustion of lycopodium dust particles: A study of thermal resistance and random distribution of particles [Volume 27, Issue 5, 2020, Pages 2353-2363]
  • Moghimi Zand, M. Developing a deformable model of liver tumor during breathing to improve targeting accuracy in image-guided therapy using finite element simulation [Volume 27, Issue 4, 2020, Pages 1955-1961]
  • Moghimi Zand, M. Numerical study of insulation structure characteristics and arrangement effects on cell trapping using alternative current insulating based dielectrophoresis [Volume 27, Issue 3, 2020, Pages 1302-1312]
  • Mohamaditalab, A. Investigation into skill leveled operators in a multi-period cellular manufacturing system with the existence of multi-functional machines [Volume 27, Issue 6, 2020, Pages 3219-3232]
  • Mohammadi, A.S. A multi-stage stochastic programming model for sustainable closed-loop supply chain network design with financial decisions: A case study of plastic production and recycling supply chain [Volume 27, Issue 1, 2020, Pages 377-395]
  • Mohammadi, F. Improvement of acrylic-urethane paint adhesion to PP-EPDM surface by mediated electrochemical oxidation [Volume 27, Issue 3, 2020, Pages 1253-1263]
  • Mohammadi, M. Experimental investigation of the effect of one-dimensional roughened surface on the pool boiling of nanofluids [Volume 27, Issue 6, 2020, Pages 2954-2966]
  • Mohammadian, M. Application of AG method and its improvement to nonlinear damped oscillators [Volume 27, Issue 1, 2020, Pages 203-214]
  • Mohammadi Nia, M. Utilizing new spherical Hankel shape functions to reformulate the deflection, free vibration, and buckling analysis of Mindlin plates based on finite element method [Volume 27, Issue 5, 2020, Pages 2209-2229]
  • Mohammadipour, R. Green one-pot three-component synthesis of 4H-chromenes in the presence of nano-kaoline/BF3/Fe3O4 as a super paramagnetic nanocatalyst [Volume 27, Issue 3, 2020, Pages 1216-1225]
  • Mohammadzade, H. Recognizing involuntary actions from 3D skeleton data using body states [Volume 27, Issue 3, 2020, Pages 1424-1436]
  • Mohanta, A. Multivariate adaptive regression spline approach to the assessment of surface mean pressure coefficient on surfaces of C-shaped building [Volume 27, Issue 6, 2020, Pages 2967-2984]
  • Moharreri, M.A. PM10 and CO dispersion modeling of emissions from four thermal power plants in Mashhad, Iran [Volume 27, Issue 5, 2020, Pages 2433-2442]
  • Mokari, M. Recognizing involuntary actions from 3D skeleton data using body states [Volume 27, Issue 3, 2020, Pages 1424-1436]
  • Mokhtari, H. Economic evaluation of investment projects under uncertainty: A probability theory perspective [Volume 27, Issue 1, 2020, Pages 448-468]
  • Mokhtari, H. Extended economic production quantity models with preventive maintenance [Volume 27, Issue 6, 2020, Pages 3253-3264]
  • Mokhtari, Sh. Improvement of acrylic-urethane paint adhesion to PP-EPDM surface by mediated electrochemical oxidation [Volume 27, Issue 3, 2020, Pages 1253-1263]
  • Mola-Abasi, H. Prediction of subgrade reaction modulus of clayey soil using group method of data handling [Volume 27, Issue 4, 2020, Pages 1740-1750]
  • Molina, J.L. Application of artificial accelerograms to estimating damage to dams using failure criteria [Volume 27, Issue 6, 2020, Pages 2740-2751]
  • Moodi, F. Application of petrographic image analysis for the assessment of chemical attack in the concrete segments of a tunnel [Volume 27, Issue 3, 2020, Pages 1187-1195]
  • Moradi, M. Effect of distribution patterns of DSM columns on the efficiency of liquefaction mitigation [Volume 27, Issue 5, 2020, Pages 2198-2208]
  • Moradi, R. Development of micro gas actuator for analyzing gas mixture [Volume 27, Issue 6, 2020, Pages 2945-2953]
  • Moshokoa, S.P. Optical solitons in birefringent fibers with four-wave mixing by extended trial equation method [Volume 27, Issue 6, 2020, Pages 3035-3052]
  • Moslehi, F. A novel selective clustering framework for appropriate labeling of clusters based on K-means algorithm [Volume 27, Issue 5, 2020, Pages 2621-2634]
  • Moslehi, F. A genetic algorithm-based framework for mining quantitative association rules without specifying minimum support and minimum confidence [Volume 27, Issue 3, 2020, Pages 1316-1332]
  • Moslemipour, Sh. Optimization of embedded rail slab track with respect to environmental vibrations [Volume 27, Issue 2, 2020, Pages 529-540]
  • Mostaan, H. Numerical investigation of the mechanical performance of Thoracic Aortic Aneurysm (TAA) NiTi stent [Volume 27, Issue 5, 2020, Pages 2382-2390]
  • Mostafa Namar, M. Thermodynamic analysis of a high-temperature hydrogen production system [Volume 27, Issue 4, 2020, Pages 1962-1971]
  • Mousavi, S.M. Project safety evaluation by a new soft computing approach-based last aggregation hesitant fuzzy complex proportional assessment in construction industry [Volume 27, Issue 2, 2020, Pages 983-1000]
  • Mousavi, S.Meysam Designing a resource-constrained project scheduling model considering multiple routes for flexible project activities: Meta-heuristic algorithms [Volume 27, Issue 5, 2020, Pages 2572-2591]
  • Movahedi-Sobhani, F. The application of multivariate analysis approaches to designing NSBM model considering undesirable variable and shared resources [Volume 27, Issue 2, 2020, Pages 893-917]
  • Mozafari, M. A game theoretic approach to coordination of pricing, ordering, and co-op advertising in supply chains with stochastic demand [Volume 27, Issue 6, 2020, Pages 3289-3304]
  • Mukherjee, A. Heat transfer correlation for a cross-flow jet impingement on a protruded surface [Volume 27, Issue 3, 2020, Pages 1218-1229]
  • Mundher Yaseen, Z. Water flow stabilization using submerged weir for draft-tube reaction hydraulic turbine [Volume 27, Issue 1, 2020, Pages 159-176]
  • Mushtaq, Asif Computational analysis of unsteady and steady magnetohydrodynamic radiating nano fluid flows past a slippery stretching sheet immersed in a permeable medium [Volume 27, Issue 6, 2020, Pages 3454-3466]
  • Mustafa, I. Series solution of slip ow of Al2O3 and Fe3O4 nanoparticles in a horizontal channel with a porous medium by using least square and Galerkin methods [Volume 27, Issue 5, 2020, Pages 2465-2477]

N

  • N, Chandrasekhar Plant-mediated green synthesis of Ag nanoparticles using Rauvolfia tetraphylla (L) flower extracts:Characterization, biological activities, and screening of the catalytic activity in formylation reaction [Volume 27, Issue 6, 2020, Pages 3353-3366]
  • Nabinezhad, A. Modified quasi-Y-source converter for increasing boost factor [Volume 27, Issue 3, 2020, Pages 1494-1505]
  • Nabipoor Afruzi, E. Robust optimization for the resource-constrained multi-project scheduling problem with uncertain activity durations [Volume 27, Issue 1, 2020, Pages 361-376]
  • Nadeem, Sohail Analytical view of magnetic hydrodynamic rotating flow of Barium Ferrite nano fluid with viscous dissipation [Volume 27, Issue 6, 2020, Pages 3421-3433]
  • Naderi, B. A novel fuzzy multi-objective method for supplier selection and order allocation problem using NSGA II [Volume 27, Issue 1, 2020, Pages 481-493]
  • Naderi, B. Mathematical models and an elephant herding optimization for multiprocessor-task flexible flow shop scheduling problems in the Manufacturing Resource Planning (MRPII) system [Volume 27, Issue 3, 2020, Pages 1562-1571]
  • Naderpour, H. Structural control of RC buildings subjected to near-fault ground motions in terms of tuned mass dampers [Volume 27, Issue 1, 2020, Pages 122-133]
  • Naderpour, H. Shear strength prediction of RC beams using adaptive neuro-fuzzy inference system [Volume 27, Issue 2, 2020, Pages 657-670]
  • Naeini, S.A. Prediction of subgrade reaction modulus of clayey soil using group method of data handling [Volume 27, Issue 4, 2020, Pages 1740-1750]
  • Najafgholipour, M.A. Seismic Behavior of Chevron Concentrically Braced Frames with Weak Beam [Volume 27, Issue 1, 2020, Pages 41-56]
  • Najafi, A.A. Robust optimization for the resource-constrained multi-project scheduling problem with uncertain activity durations [Volume 27, Issue 1, 2020, Pages 361-376]
  • Najafi, E. The application of multivariate analysis approaches to designing NSBM model considering undesirable variable and shared resources [Volume 27, Issue 2, 2020, Pages 893-917]
  • Najafi, M. A framework for Earthquake Emergency Response in Iran [Volume 27, Issue 5, 2020, Pages 2604-2620]
  • Najafizadeh, M.M. The experimental assessment of the effect of polypropylene fibers on the improvement of nano-silica concrete behavior [Volume 27, Issue 2, 2020, Pages 682-692]
  • Najarchi, M. The experimental assessment of the effect of polypropylene fibers on the improvement of nano-silica concrete behavior [Volume 27, Issue 2, 2020, Pages 682-692]
  • Nakhai Kamalabadi, I. Reliable hierarchical multimodal hub location problem: Models and Lagrangian relaxation algorithm [Volume 27, Issue 3, 2020, Pages 1525-1543]
  • Nakhai Kamalabadi, I. Influence of Two Different Producers in a Competitive Location Problem [Volume 27, Issue 5, 2020, Pages 2539-2554]
  • Namdar, M. A joint determination of production cycle length, maintenance policy, and control chart parameters considering time value of money under stochastic shift size [Volume 27, Issue 1, 2020, Pages 427-447]
  • Narayan Ray, R. Quasi-oppositional symbiotic organisms search algorithm for different economic load dispatch problems [Volume 27, Issue 6, 2020, Pages 3096-3117]
  • Nasiri, M. Optimal location of stone column for stabilization of sand slope: An experimental and 3D numerical investigation [Volume 27, Issue 1, 2020, Pages 105-116]
  • Nasiri, M.M. The stage shop scheduling problem: lower bound and metaheuristic [Volume 27, Issue 2, 2020, Pages 862-879]
  • Nasseri, S. Drinking water softening with electrocoagulation process: Influence of direct and alternating currents as inductive with different arrangement rod electrodes and polarity inverter [Volume 27, Issue 3, 2020, Pages 1275-1292]
  • Nawaz, Sadaf Entropy generation analysis of peristaltic flow of magneto-nanoparticles suspended in water under second-order slip conditions [Volume 27, Issue 6, 2020, Pages 3434-3446]
  • Nawaz, T. On designing CUSUM charts using ratio-type estimators for monitoring the location of normal processes [Volume 27, Issue 3, 2020, Pages 1593-1605]
  • Nawaz, T. Enhancing efficiency of ratio-type estimators of population variance by a combination of information on robust location measures [Volume 27, Issue 4, 2020, Pages 2040-2056]
  • Nayak, M.K. Comparison of disparate solid volume fraction ratios of hybrid nanofluids flow over a permeable flat surface with aligned magnetic field and Marangoni convection [Volume 27, Issue 6, 2020, Pages 3367-3380]
  • Naz, F. Enhancing efficiency of ratio-type estimators of population variance by a combination of information on robust location measures [Volume 27, Issue 4, 2020, Pages 2040-2056]
  • Nejati, M. A modified indicial functions approximation for nonlinear aeroelastic analysis [Volume 27, Issue 3, 2020, Pages 1230-1254]
  • Nejat Pishkenari, H. Vibrational analysis of fullerene hydrides using AIREBO potential [Volume 27, Issue 4, 2020, Pages 1933-1944]
  • Nejat Pishkenari, H. Modeling vibrational behavior of silicon nanowires using accelerated molecular dynamics simulations [Volume 27, Issue 2, 2020, Pages 819-827]
  • Nejat Pishkenari, H. DNA sequencing based on physical properties at single nucleotide resolution [Volume 27, Issue 5, 2020, Pages 2364-2371]
  • Nekoomanesh Haghighi, M. Improvement of acrylic-urethane paint adhesion to PP-EPDM surface by mediated electrochemical oxidation [Volume 27, Issue 3, 2020, Pages 1253-1263]
  • Nemati, E. Optimal location of stone column for stabilization of sand slope: An experimental and 3D numerical investigation [Volume 27, Issue 1, 2020, Pages 105-116]
  • Nemati, H. Modeling particle deposition in the respiratory system during successive respiratory cycles [Volume 27, Issue 1, 2020, Pages 215-228]
  • Nematzadeh, F. Numerical investigation of the mechanical performance of Thoracic Aortic Aneurysm (TAA) NiTi stent [Volume 27, Issue 5, 2020, Pages 2382-2390]
  • Nesmiyan, A.Y. Agricultural tractors of the fifth generation [Volume 27, Issue 2, 2020, Pages 745-756]
  • Ng, C.W.W. A vacuum-refilled tensiometer for deep monitoring of in-situ pore water pressure [Volume 27, Issue 2, 2020, Pages 596-606]
  • Nguyen, T.T. Effects of process parameters in gas tungsten arc welding of thin titanium plates [Volume 27, Issue 3, 2020, Pages 1313-1323]
  • Nikitchenko, S.L. Agricultural tractors of the fifth generation [Volume 27, Issue 2, 2020, Pages 745-756]
  • Nik Khah, H. Technical and economic considerations for the application of permanent magnet brushless motors in evaporative water coolers [Volume 27, Issue 6, 2020, Pages 3204-3217]
  • Nikkhoo, A. An exact solution to the problems of flexo-poroelastic structures rested on elastic beds acted upon by moving loads [Volume 27, Issue 5, 2020, Pages 2326-2341]
  • Nili-Ahmadabadi, M. Inverse Design of a Centrifugal Pump on the Meridional Plane Using Ball-Spine Algorithm [Volume 27, Issue 5, 2020, Pages 2478-2488]
  • Niroomand, S. An effective solution approach to multi-objective fractional fixed charge problem with fuzzy parameters [Volume 27, Issue 4, 2020, Pages 2057-2068]
  • Noori, M. Tensile creep monitoring of basalt fiber-reinforced polymer plates via electrical potential change and artificial neural network [Volume 27, Issue 4, 2020, Pages 1995-2008]
  • Noori-Daryan, m. Optimal pricing in the presence of advance booking strategies for complementary supply chains [Volume 27, Issue 3, 2020, Pages 1616-1633]
  • Noorzad, R. Volume change behavior of stabilized expansive clay with lignosulfonate [Volume 27, Issue 4, 2020, Pages 1762-1775]
  • Nouri, R. Numerical study of insulation structure characteristics and arrangement effects on cell trapping using alternative current insulating based dielectrophoresis [Volume 27, Issue 3, 2020, Pages 1302-1312]
  • Nourifar, R. Mathematical modelling of a decentralized multi-echelon supply chain network considering service level under uncertainty [Volume 27, Issue 3, 2020, Pages 1634-1654]

O

  • Ostadi, B. Optimizing decisions on under- and out-of-warranty products in a finite planning horizon [Volume 27, Issue 1, 2020, Pages 494-515]
  • Othman, F. Water flow stabilization using submerged weir for draft-tube reaction hydraulic turbine [Volume 27, Issue 1, 2020, Pages 159-176]
  • Ozgun, O. Powder metallurgy Mg-Sn alloys: Production and characterization [Volume 27, Issue 3, 2020, Pages 1255-1265]

P

  • Pak, A. An endochronic- based approach to simulating pore water pressure variation during liquefaction of sand [Volume 27, Issue 2, 2020, Pages 541-550]
  • Pal, M. Trapezoidal neutrosophic aggregation operators and their application to the multi-attribute decision-making process [Volume 27, Issue 3, 2020, Pages 1655-1673]
  • Pang, T. Enhancing efficiency of ratio-type estimators of population variance by a combination of information on robust location measures [Volume 27, Issue 4, 2020, Pages 2040-2056]
  • Parhi, D. R. Fault detection in cracked structures under moving load through a recurrent-neural-networks-based approach [Volume 27, Issue 4, 2020, Pages 1886-1896]
  • Parhi, D.R. Intelligent navigation of a self-fabricated biped robot using a regression controller [Volume 27, Issue 1, 2020, Pages 262-272]
  • Parivar, P. Environmental impact analysis of high-rise buildings for resilient urban development [Volume 27, Issue 4, 2020, Pages 1843-1857]
  • Parsafard, P. Variance-based features for keyword extraction in Persian and English text documents [Volume 27, Issue 3, 2020, Pages 1301-1315]
  • Partovi, Fatemeh Control of natural frequency of beams using different pre-tensioning cable patterns [Volume 27, Issue 6, 2020, Pages 2752-2774]
  • Patel, N. A comparative study of economic load dispatch using sine cosine algorithm [Volume 27, Issue 3, 2020, Pages 1467-1480]
  • Patel, N. An experimental study regarding economic load dispatch using search group optimization [Volume 27, Issue 6, 2020, Pages 3175-3189]
  • Patel, S.K. Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel [Volume 27, Issue 6, 2020, Pages 2838-2852]
  • Pavlović, J. Optimization of manipulator drive mechanisms of hydraulic excavators on the basis of the tribological criterion [Volume 27, Issue 5, 2020, Pages 2372-2381]
  • Paydar, M.M. Mathematical modelling of a decentralized multi-echelon supply chain network considering service level under uncertainty [Volume 27, Issue 3, 2020, Pages 1634-1654]
  • Paydar, M.M. Dynamic virtual cell formation considering new product development [Volume 27, Issue 4, 2020, Pages 2093-2107]
  • Pazooki, F. Model reference adaptive control of a small satellite in the presence of parameter uncertainties [Volume 27, Issue 6, 2020, Pages 2933-2944]
  • Pham, V.T. Effects of process parameters in gas tungsten arc welding of thin titanium plates [Volume 27, Issue 3, 2020, Pages 1313-1323]
  • Piroti, S. The experimental assessment of the effect of polypropylene fibers on the improvement of nano-silica concrete behavior [Volume 27, Issue 2, 2020, Pages 682-692]
  • Piroti, S. Experimental study of the effect of polymer fiber based on epoxy resin on compressive and exural strength parameters [Volume 27, Issue 4, 2020, Pages 1803-1813]
  • Pishvaee, M.S. A multi-stage stochastic programming model for sustainable closed-loop supply chain network design with financial decisions: A case study of plastic production and recycling supply chain [Volume 27, Issue 1, 2020, Pages 377-395]
  • Pouria Mirzaei, P. Collapse assessment of protected steel moment frame under post-earthquake fire [Volume 27, Issue 6, 2020, Pages 2775-2789]
  • Pour-Moallem, N. Dynamic negawatt demand response resource modeling and prioritizing in power markets [Volume 27, Issue 3, 2020, Pages 1361-1372]
  • Prasad, M. Design and analysis of solar photovoltaic-fed Z-source inverter-based dynamic voltage restorer [Volume 27, Issue 6, 2020, Pages 3190-3203]
  • Puneeth, K. Influence of areca nut nanofiller on mechanical and tribological properties of coir fibre reinforced epoxy based polymer composite [Volume 27, Issue 4, 2020, Pages 1972-1981]

Q

  • Qari, H. Optimal sizing of hybrid WT/PV/diesel generator/battery system using MINLP method for a region in Kerman [Volume 27, Issue 6, 2020, Pages 3066-3074]
  • Qayyum, S. Novel aspects of Soret and Dufour in entropy generation minimization for Williamson fluid flow [Volume 27, Issue 5, 2020, Pages 2451-2464]

R

  • Ra, W.-J. Usability of arc fault circuit interrupters with network function [Volume 27, Issue 2, 2020, Pages 607-613]
  • Rabbani, M. Optimal pricing in the presence of advance booking strategies for complementary supply chains [Volume 27, Issue 3, 2020, Pages 1616-1633]
  • Rad, M.A. Investigation into the interaction between quartz nanostructures and human cell lines for tissue engineering [Volume 27, Issue 5, 2020, Pages 2343-2352]
  • Rafiee, M. Investigation into skill leveled operators in a multi-period cellular manufacturing system with the existence of multi-functional machines [Volume 27, Issue 6, 2020, Pages 3219-3232]
  • Rahimi, A.B. Improving heat transfer in a triplex tube heat exchanger containing phase-change materials by modifications of length and position of fins [Volume 27, Issue 1, 2020, Pages 239-251]
  • Rahimi, E. Freight modal policies toward a sustainable society [Volume 27, Issue 6, 2020, Pages 2690-2703]
  • Rahmani, D. Predictive heuristics for generating robust and stable schedules in single-machine systems under disruption [Volume 27, Issue 5, 2020, Pages 2592-2603]
  • Rahmani, K. Experimental study of the effect of polymer fiber based on epoxy resin on compressive and exural strength parameters [Volume 27, Issue 4, 2020, Pages 1803-1813]
  • Rahmaninia, R. Computational optimization of a UFAD system using large eddy simulation [Volume 27, Issue 6, 2020, Pages 2871-2888]
  • Rahmati, A. Experimental study of the effect of polymer fiber based on epoxy resin on compressive and exural strength parameters [Volume 27, Issue 4, 2020, Pages 1803-1813]
  • Rahmati, Gh. Static performance of geosynthetic reinforced soil walls with peripheral soil-cement mixtures [Volume 27, Issue 3, 2020, Pages 1028-1038]
  • Raj, P.V.R.P. Product substitution with customer segmentation under panic buying behavior [Volume 27, Issue 5, 2020, Pages 2514-2528]
  • Rajabi, A. M. A review on SPT-based liquefaction potential evaluation to assess the possibility of performing a risk management [Volume 27, Issue 2, 2020, Pages 639-656]
  • Rajabpour, R. Developing a new algorithm (G-JPSO) for optimal control of pumps in water distribution networks [Volume 27, Issue 1, 2020, Pages 68-79]
  • Rajabzadeh Gatabi, M. Numerical and experimental study of the effect of the process parameters on the void evolution in the cold extrusion of rods [Volume 27, Issue 1, 2020, Pages 287-294]
  • Rajaei, A. Modified quasi-Y-source converter for increasing boost factor [Volume 27, Issue 3, 2020, Pages 1494-1505]
  • Rakhshandehroo, Gh.R. Developing a new algorithm (G-JPSO) for optimal control of pumps in water distribution networks [Volume 27, Issue 1, 2020, Pages 68-79]
  • Ramezanian, R. A mathematical model for competitive location problem with product selection [Volume 27, Issue 4, 2020, Pages 2157-2176]
  • Ramezanianpour, A.A. Application of petrographic image analysis for the assessment of chemical attack in the concrete segments of a tunnel [Volume 27, Issue 3, 2020, Pages 1187-1195]
  • Ranjbar, B. The study of cavitation phenomenon in multistage centrifugal pump and reduction of its damages [Volume 27, Issue 3, 2020, Pages 1339-1348]
  • Ranjbar, F. The study of cavitation phenomenon in multistage centrifugal pump and reduction of its damages [Volume 27, Issue 3, 2020, Pages 1339-1348]
  • Rasa, S.H. A kinetic study of acetone acidic oxidation with KMnO4 in the absence and presence of CuO/γAl2O3 as a heterogeneous nano-catalyst [Volume 27, Issue 3, 2020, Pages 1234-1242]
  • Rashid, A.S.A. Sustainable use of stabilized flood mud as subgrade soil for low volume traffic roads [Volume 27, Issue 6, 2020, Pages 2719-2726]
  • Raza, M.A. On designing CUSUM charts using ratio-type estimators for monitoring the location of normal processes [Volume 27, Issue 3, 2020, Pages 1593-1605]
  • Razzaq, Mudassar Computational analysis of unsteady and steady magnetohydrodynamic radiating nano fluid flows past a slippery stretching sheet immersed in a permeable medium [Volume 27, Issue 6, 2020, Pages 3454-3466]
  • Reynoso, J. Inventory model optimization revisited: Understanding service inventories to improve performance [Volume 27, Issue 3, 2020, Pages 1572-1592]
  • Rezaee, B. An integrated lot-sizing model with supplier and carrier selection and quantity discounts considering multiple products [Volume 27, Issue 4, 2020, Pages 2140-2156]
  • Rezaei Ravari, M. ML-CK-ELM: An efficient multi-layer extreme learning machine using combined kernels for multi-label classification [Volume 27, Issue 6, 2020, Pages 3005-3018]
  • Riahi Dehkordi, E. Application of petrographic image analysis for the assessment of chemical attack in the concrete segments of a tunnel [Volume 27, Issue 3, 2020, Pages 1187-1195]
  • Roshanian, J. Model reference adaptive control of a small satellite in the presence of parameter uncertainties [Volume 27, Issue 6, 2020, Pages 2933-2944]
  • Rostami, A. Dynamic virtual cell formation considering new product development [Volume 27, Issue 4, 2020, Pages 2093-2107]
  • Rouboa, A. Investigating the effects of impact directions on improving head injury index [Volume 27, Issue 4, 2020, Pages 1867-1877]
  • Rouhi, H. Studying buckling of composite rods made of hybrid carbon fiber/carbon nanotube-reinforced polyimide using multi-scale FEM [Volume 27, Issue 1, 2020, Pages 252-261]
  • Roustaei, M. Laboratory investigation of geotextile position on CBR of clayey sand soil under freeze-thaw cycle [Volume 27, Issue 6, 2020, Pages 2808-2816]
  • Rout, S. Heat transfer correlation for a cross-flow jet impingement on a protruded surface [Volume 27, Issue 3, 2020, Pages 1218-1229]
  • Roy, A.K. Design of mixed flow pump impeller blade using mean streamline theory and its analysis [Volume 27, Issue 1, 2020, Pages 350-360]

S

  • Saadatpour, M.M. Effects of seismic pounding between adjacent structures considering structure-soil-structure interaction [Volume 27, Issue 5, 2020, Pages 2230-2246]
  • Saadvandi, M. Presenting a series-parallel redundancy allocation problem with multi-state components using recursive algorithm and meta-heuristic [Volume 27, Issue 2, 2020, Pages 970-982]
  • Saand, A. Suitability of brick kiln waste as a stabilizer for clayey soils [Volume 27, Issue 5, 2020, Pages 2258-2263]
  • Saand, A. A new approach to improving durability of rice husk ash blended concrete with re-dispersible polymer powder [Volume 27, Issue 4, 2020, Pages 1858-1865]
  • Saberi Movahed, F. ML-CK-ELM: An efficient multi-layer extreme learning machine using combined kernels for multi-label classification [Volume 27, Issue 6, 2020, Pages 3005-3018]
  • Sabermahany, H. Dynamic response of concrete funicular shells with a rectangular base under impulse loads [Volume 27, Issue 4, 2020, Pages 1714-1727]
  • Saber-Samandari, S. Free vibration response of functionally graded carbon nanotube double curved shells and panels with piezoelectric layers in a thermal environment [Volume 27, Issue 5, 2020, Pages 2391-2408]
  • Sabzevari, M. Supply chain reconfiguration for new product development through risk management approach [Volume 27, Issue 4, 2020, Pages 2108-2126]
  • Sadat Hosseini, A. SCF distribution in FRP-strengthened tubular T-joints under brace axial loading [Volume 27, Issue 3, 2020, Pages 1113-1129]
  • Sadeghi, H. A vacuum-refilled tensiometer for deep monitoring of in-situ pore water pressure [Volume 27, Issue 2, 2020, Pages 596-606]
  • Sadeghi, K. Evaluation of the response modification factor of RC structures constructed with bubble deck system [Volume 27, Issue 4, 2020, Pages 1699-1713]
  • Sadeghnejad, S. Hyperelastic modeling of sino-nasal tissue for haptic neurosurgery simulation [Volume 27, Issue 3, 2020, Pages 1266-1276]
  • Sadjadi, M. Static performance of geosynthetic reinforced soil walls with peripheral soil-cement mixtures [Volume 27, Issue 3, 2020, Pages 1028-1038]
  • Sadjadi, S.J. A mathematical model for competitive location problem with product selection [Volume 27, Issue 4, 2020, Pages 2157-2176]
  • Sadjadi, S.J. Technology valuation of NTBFs in the field of cleaner production in terms of investors' exibility and uncertainty in public policy [Volume 27, Issue 6, 2020, Pages 3322-3337]
  • Sadr Hosseini, S. M. Hyperelastic modeling of sino-nasal tissue for haptic neurosurgery simulation [Volume 27, Issue 3, 2020, Pages 1266-1276]
  • Sadrnezhaad, S.K. Pulsed Nd: YAG laser dissimilar welding of Ti/Al3105 alloys [Volume 27, Issue 4, 2020, Pages 1982-1994]
  • Saeidinezhad, A. Boundary layer and surface pressure distribution behavior over a submarine nose model with two different nose shapes [Volume 27, Issue 3, 2020, Pages 1277-1289]
  • Safari, E. Effect of welding parameters on dissimilar pulsed laser joint between nickel-based alloy Hastelloy X and austenitic stainless steel AISI 304L [Volume 27, Issue 5, 2020, Pages 2443-2450]
  • Safary Sabet, Sh. Thermodynamic analysis of a high-temperature hydrogen production system [Volume 27, Issue 4, 2020, Pages 1962-1971]
  • Safdarian, A. Demand response as a complement for wind energy from the viewpoint of system well-being [Volume 27, Issue 3, 2020, Pages 1373-1383]
  • Saffarzadeh, S. Weight determination and ranking priority in interval group MCDM [Volume 27, Issue 6, 2020, Pages 3242-3252]
  • Sahebjamnia, N. Resilient supplier selection and order allocation under uncertainty [Volume 27, Issue 1, 2020, Pages 411-426]
  • Sahraeian, R. Predictive heuristics for generating robust and stable schedules in single-machine systems under disruption [Volume 27, Issue 5, 2020, Pages 2592-2603]
  • Sahu, C. Intelligent navigation of a self-fabricated biped robot using a regression controller [Volume 27, Issue 1, 2020, Pages 262-272]
  • Saidi, M.H. Computer modeling of the operating room ventilation performance in connection with surgical site infection [Volume 27, Issue 2, 2020, Pages 704-714]
  • Saidi, M.S. Modeling particle deposition in the respiratory system during successive respiratory cycles [Volume 27, Issue 1, 2020, Pages 215-228]
  • Sajadi, B. Computer modeling of the operating room ventilation performance in connection with surgical site infection [Volume 27, Issue 2, 2020, Pages 704-714]
  • Sajadi, S.M. Supply chain reconfiguration for new product development through risk management approach [Volume 27, Issue 4, 2020, Pages 2108-2126]
  • Sajjad Ali Shah, F.B. Modeling, control, and simulation of a SCARA PRR-type robot manipulator [Volume 27, Issue 1, 2020, Pages 330-340]
  • Salahuddin, Aisha Computational analysis of unsteady and steady magnetohydrodynamic radiating nano fluid flows past a slippery stretching sheet immersed in a permeable medium [Volume 27, Issue 6, 2020, Pages 3454-3466]
  • Salamatpoor, S. Mitigating the uneven settlement of nearby strip footings on loose saturated sand using concrete pedestals: A model test study [Volume 27, Issue 3, 2020, Pages 1162-1175]
  • Salari, M. The deformation mechanism of a high rockfill dam during the construction and first impounding [Volume 27, Issue 2, 2020, Pages 566-587]
  • Salehi, G.R. PM10 and CO dispersion modeling of emissions from four thermal power plants in Mashhad, Iran [Volume 27, Issue 5, 2020, Pages 2433-2442]
  • Salehi, M. Free vibration response of functionally graded carbon nanotube double curved shells and panels with piezoelectric layers in a thermal environment [Volume 27, Issue 5, 2020, Pages 2391-2408]
  • Salih Ameen, A.M. Water flow stabilization using submerged weir for draft-tube reaction hydraulic turbine [Volume 27, Issue 1, 2020, Pages 159-176]
  • Salmani-Tehrani, M. Developing a deformable model of liver tumor during breathing to improve targeting accuracy in image-guided therapy using finite element simulation [Volume 27, Issue 4, 2020, Pages 1955-1961]
  • Salmasnia, A. A joint determination of production cycle length, maintenance policy, and control chart parameters considering time value of money under stochastic shift size [Volume 27, Issue 1, 2020, Pages 427-447]
  • Salmasnia, A. Bi-objective optimization of non-periodic preventive maintenance strategy by considering time value of money [Volume 27, Issue 6, 2020, Pages 3305-3321]
  • Samadvand, H. Near free-edge stresses in FRP-to-concrete bonded joint due to mechanical and thermal loads [Volume 27, Issue 6, 2020, Pages 2727-2739]
  • Samimi, A. Freight modal policies toward a sustainable society [Volume 27, Issue 6, 2020, Pages 2690-2703]
  • Sari, M. Simulations of nonlinear advection-diffusion models through various finite element techniques [Volume 27, Issue 6, 2020, Pages 2853-2870]
  • Sarparandeh, M.H. Medium-term planning of vehicle-to-grid aggregators for providing frequency regulation service [Volume 27, Issue 3, 2020, Pages 1413-1423]
  • Sattari, Roshana Prediction of the size of silver nanoparticles prepared via green synthesis: A gene expression programming approach [Volume 27, Issue 6, 2020, Pages 3399-3411]
  • Saxena, R. Assessment of Mechanical and Durability Properties of Concrete Containing PET Waste [Volume 27, Issue 1, 2020, Pages 1-9]
  • Sehat Kashani, S. Environmental impact analysis of high-rise buildings for resilient urban development [Volume 27, Issue 4, 2020, Pages 1843-1857]
  • Seivandian, M. Bi-objective optimization of non-periodic preventive maintenance strategy by considering time value of money [Volume 27, Issue 6, 2020, Pages 3305-3321]
  • Semenov, A.S. Economic efficiency of the application of artificial air cooling for normalization of thermal conditions in oil mines [Volume 27, Issue 3, 2020, Pages 1606-1615]
  • Sepahi-Younsi, J. Experimental investigation into the effects of Mach number and boundary-layer bleed on flow stability of a supersonic air intake [Volume 27, Issue 3, 2020, Pages 1197-1205]
  • Sepahvandi, R. Nonlinear vibration analysis of a partially coated circular microplate under electrostatic actuationpartially coated circular microplate under electrostatic actuation [Volume 27, Issue 2, 2020, Pages 715-729]
  • Sergeev, K.A. Analysis of change in the state of hydraulic drive of machines in operation according to the diagnostic results [Volume 27, Issue 1, 2020, Pages 295-301]
  • Setarenejad, A. Macrophage+: A game with a purpose for applying human intelligence in control mechanisms [Volume 27, Issue 6, 2020, Pages 2985-3004]
  • Seyed Esfahani, M.M. An evaluation of inventory systems via an evidence theory for deteriorating items under uncertain conditions and advanced payment [Volume 27, Issue 6, 2020, Pages 3338-3351]
  • Seyrfar, A. Improving facility management of public hospitals in Iran using building information modeling [Volume 27, Issue 6, 2020, Pages 2817-2829]
  • Shabanian, H. A rule-based post-processing approach to improve Persian OCR performance [Volume 27, Issue 6, 2020, Pages 3019-3033]
  • Shafee, A. Thermodynamic analysis of a high-temperature hydrogen production system [Volume 27, Issue 4, 2020, Pages 1962-1971]
  • Shahanaghi, K. A bi-objective hierarchical hub location model with facility failure [Volume 27, Issue 4, 2020, Pages 2009-2020]
  • Shahbazi, M. Development of micro gas actuator for analyzing gas mixture [Volume 27, Issue 6, 2020, Pages 2945-2953]
  • Shahbazi, S. Seismic evaluation of special steel moment frames subjected to near-field earthquakes with forward directivity by considering soil-structure interaction effects [Volume 27, Issue 5, 2020, Pages 2264-2282]
  • Shahidian, A. Bi-objective optimization of non-periodic preventive maintenance strategy by considering time value of money [Volume 27, Issue 6, 2020, Pages 3305-3321]
  • Shahriari, M. R. Presenting a series-parallel redundancy allocation problem with multi-state components using recursive algorithm and meta-heuristic [Volume 27, Issue 2, 2020, Pages 970-982]
  • Shahzad, M. Computational analysis of the slow invariant manifold for single and multi-route reaction mechanisms [Volume 27, Issue 3, 2020, Pages 1293-1299]
  • Shaikh, S.H. Suitability of brick kiln waste as a stabilizer for clayey soils [Volume 27, Issue 5, 2020, Pages 2258-2263]
  • Shakarami, B. Numerical modeling of a new reinforced masonry system subjected to in-plane cyclic loading [Volume 27, Issue 6, 2020, Pages 2790-2807]
  • Shakarami, L. A regression-based approach to the prediction of crest settlement of embankment dams under earthquake shaking [Volume 27, Issue 2, 2020, Pages 671-681]
  • Shamloo, A. Investigation into the interaction between quartz nanostructures and human cell lines for tissue engineering [Volume 27, Issue 5, 2020, Pages 2343-2352]
  • Shams, B. Laboratory investigation of geotextile position on CBR of clayey sand soil under freeze-thaw cycle [Volume 27, Issue 6, 2020, Pages 2808-2816]
  • Shams, Sh. A modified indicial functions approximation for nonlinear aeroelastic analysis [Volume 27, Issue 3, 2020, Pages 1230-1254]
  • Shams Aliee, F. Macrophage+: A game with a purpose for applying human intelligence in control mechanisms [Volume 27, Issue 6, 2020, Pages 2985-3004]
  • Shams Esfand Abadi, M. The variable step-size wavelet transform-domain LMS adaptive filter algorithm [Volume 27, Issue 3, 2020, Pages 1398-1412]
  • Sharbatdar, M.K. Flexural retrofitting of the damaged reinforced concrete beams by using HPFRCC [Volume 27, Issue 6, 2020, Pages 2680-2689]
  • Shariati, M. Application of AG method and its improvement to nonlinear damped oscillators [Volume 27, Issue 1, 2020, Pages 203-214]
  • Shariati, M. Fatigue and fracture behavior of A516 steel used in thick-walled pressure vessels [Volume 27, Issue 6, 2020, Pages 2902-2914]
  • Shariatmadar, H. Improving feature extraction via time series modeling for structural health monitoring based on unsupervised learning methods [Volume 27, Issue 3, 2020, Pages 1001-1018]
  • Sharifi, M. Presenting a series-parallel redundancy allocation problem with multi-state components using recursive algorithm and meta-heuristic [Volume 27, Issue 2, 2020, Pages 970-982]
  • Sharifipur, M. Optimal location of stone column for stabilization of sand slope: An experimental and 3D numerical investigation [Volume 27, Issue 1, 2020, Pages 105-116]
  • Sharma, R.K. Assessment of Mechanical and Durability Properties of Concrete Containing PET Waste [Volume 27, Issue 1, 2020, Pages 1-9]
  • Shayanfar, M. A. Cracking effects on chloride diffusion and corrosion initiation in RC structures via finite element simulation [Volume 27, Issue 5, 2020, Pages 2301-2315]
  • Shayanfar, M.A. Modified seismic design lateral force distribution for the Performance-Based Plastic Design (PBPD) of steel moment structures considering soil flexibility [Volume 27, Issue 3, 2020, Pages 1050-1065]
  • Shchirov, V.V. Agricultural tractors of the fifth generation [Volume 27, Issue 2, 2020, Pages 745-756]
  • Shehab, A.A. Pulsed Nd: YAG laser dissimilar welding of Ti/Al3105 alloys [Volume 27, Issue 4, 2020, Pages 1982-1994]
  • Shehzad, S.A. Analysis of the second-grade fluid flow in a porous channel by Cattaneo-Christov and generalized Fick's theories [Volume 27, Issue 4, 2020, Pages 1945-1954]
  • Sheikhbahaei, R. Optimal tuner selection using Kalman filter for a real-time modular gas turbine model [Volume 27, Issue 2, 2020, Pages 806-818]
  • Sheikh-El-Eslami, M.K. A solution based on fuzzy max-min approach to the bi-level programming model of energy and exiramp procurement in day-ahead market [Volume 27, Issue 2, 2020, Pages 846-861]
  • Sheikhi, M. Effect of processing time on microstructure of surface and corrosion resistance of coatings resulting from plasma electrolytic oxidation on titanium alloy in hydroxyapatite nano-particles electrolyte [Volume 27, Issue 1, 2020, Pages 302-309]
  • Sheikholeslami, M. Thermodynamic analysis of a high-temperature hydrogen production system [Volume 27, Issue 4, 2020, Pages 1962-1971]
  • Shervani-Tabar, M.T. Numerical investigation into the effect of viscosity on bubble dynamics in a narrow channel [Volume 27, Issue 5, 2020, Pages 2419-2432]
  • Shojaee, S. Utilizing new spherical Hankel shape functions to reformulate the deflection, free vibration, and buckling analysis of Mindlin plates based on finite element method [Volume 27, Issue 5, 2020, Pages 2209-2229]
  • Shojaei Berjouei, A. A holistic day-ahead distributed energy management approach: Equilibrium selection for customers' game [Volume 27, Issue 3, 2020, Pages 1437-1449]
  • Shokrgozar Abbasi, A. Vapor solidification of saturated air in two-dimensional stagnation flow [Volume 27, Issue 2, 2020, Pages 693-703]
  • Shokrollahi, S. A modified indicial functions approximation for nonlinear aeroelastic analysis [Volume 27, Issue 3, 2020, Pages 1230-1254]
  • Shooshpasha, I. Effects of recycled polyethylene terephthalate fibers on strength behavior of cemented Babolsar sand [Volume 27, Issue 3, 2020, Pages 1130-1143]
  • Shooshtari, A. Pulsating flow induced parametric instabilities of a smart embedded micro-shell based on nonlocal piezoelasticity theory [Volume 27, Issue 2, 2020, Pages 730-744]
  • Siadat, A. Project safety evaluation by a new soft computing approach-based last aggregation hesitant fuzzy complex proportional assessment in construction industry [Volume 27, Issue 2, 2020, Pages 983-1000]
  • Siadat, S.A. Evaluation of the response modification factor of RC structures constructed with bubble deck system [Volume 27, Issue 4, 2020, Pages 1699-1713]
  • Singh, N. A Modified Variant of Grey Wolf Optimizer [Volume 27, Issue 3, 2020, Pages 1450-1466]
  • Singh, T. S. Analysis of the effect of temperature on the morphology of egg shell calcium oxide catalyst: Catalyst production for biodiesel preparation [Volume 27, Issue 6, 2020, Pages 2915-2923]
  • Sistani Nejad, R. Numerical modeling of a new reinforced masonry system subjected to in-plane cyclic loading [Volume 27, Issue 6, 2020, Pages 2790-2807]
  • Sobhanallahi, M.A. A novel fuzzy multi-objective method for supplier selection and order allocation problem using NSGA II [Volume 27, Issue 1, 2020, Pages 481-493]
  • Sodha, M.S. Experimental evaluation of solar integrated water heater [Volume 27, Issue 4, 2020, Pages 1878-1885]
  • Soleimani Amiri, M. An evaluation of inventory systems via an evidence theory for deteriorating items under uncertain conditions and advanced payment [Volume 27, Issue 6, 2020, Pages 3338-3351]
  • Soleymani, S. Demand response as a complement for wind energy from the viewpoint of system well-being [Volume 27, Issue 3, 2020, Pages 1373-1383]
  • Soltani, M. R. Experimental investigation of shock wave oscillation on a thin supercritical airfoil [Volume 27, Issue 2, 2020, Pages 795-805]
  • Soltani, M.R. Experimental investigation into the effects of Mach number and boundary-layer bleed on flow stability of a supersonic air intake [Volume 27, Issue 3, 2020, Pages 1197-1205]
  • Sonmez, O. Flood hazard risk evaluation using fuzzy logic and weightage- based combination methods in geographic information system [Volume 27, Issue 2, 2020, Pages 517-528]
  • Sonmezoglu, A. Optical solitons in birefringent fibers with four-wave mixing by extended trial equation method [Volume 27, Issue 6, 2020, Pages 3035-3052]
  • Sorokin, P.A. Analysis of change in the state of hydraulic drive of machines in operation according to the diagnostic results [Volume 27, Issue 1, 2020, Pages 295-301]
  • Soroureddin, A. Numerical investigation into the effect of viscosity on bubble dynamics in a narrow channel [Volume 27, Issue 5, 2020, Pages 2419-2432]
  • Soyaslan, M. Modeling, control, and simulation of a SCARA PRR-type robot manipulator [Volume 27, Issue 1, 2020, Pages 330-340]
  • Sultan, F. Computational analysis of the slow invariant manifold for single and multi-route reaction mechanisms [Volume 27, Issue 3, 2020, Pages 1293-1299]
  • Sun, F.H. Research on the risk assessment method of PPP project based on the improved matter element model [Volume 27, Issue 2, 2020, Pages 614-624]

T

  • Tadi Beni, Y. Fatigue and fracture behavior of A516 steel used in thick-walled pressure vessels [Volume 27, Issue 6, 2020, Pages 2902-2914]
  • Tafakor, R. An exact solution to the problems of flexo-poroelastic structures rested on elastic beds acted upon by moving loads [Volume 27, Issue 5, 2020, Pages 2326-2341]
  • Taghavian, H. Analytic solution of a system of linear distributed order differential equations in the Reimann-Liouville sense [Volume 27, Issue 3, 2020, Pages 1384-1397]
  • Tahmasebpoor, S.S. Economic evaluation of investment projects under uncertainty: A probability theory perspective [Volume 27, Issue 1, 2020, Pages 448-468]
  • Talebbeydokhti, N. Lattice Boltzmann solution of advection- dominated mass transport problem: A comparison [Volume 27, Issue 2, 2020, Pages 625-638]
  • Talebbeydokhti, N. Developing a new algorithm (G-JPSO) for optimal control of pumps in water distribution networks [Volume 27, Issue 1, 2020, Pages 68-79]
  • Talebi, M. Experimental investigation of shock wave oscillation on a thin supercritical airfoil [Volume 27, Issue 2, 2020, Pages 795-805]
  • Taleizadeh, A.A. Optimal pricing in the presence of advance booking strategies for complementary supply chains [Volume 27, Issue 3, 2020, Pages 1616-1633]
  • Tanegonbadi, B. Volume change behavior of stabilized expansive clay with lignosulfonate [Volume 27, Issue 4, 2020, Pages 1762-1775]
  • Tarihi, A. Macrophage+: A game with a purpose for applying human intelligence in control mechanisms [Volume 27, Issue 6, 2020, Pages 2985-3004]
  • Tavakolian-Ardakani, Zahra Electrochemical determination of glutathione in hemolyzed erythrocytes [Volume 27, Issue 6, 2020, Pages 3412-3420]
  • Tavazoei, M.S. Analytic solution of a system of linear distributed order differential equations in the Reimann-Liouville sense [Volume 27, Issue 3, 2020, Pages 1384-1397]
  • Tofighi, H. Gene expression programming models for liquefaction-induced lateral spreading [Volume 27, Issue 6, 2020, Pages 2704-2718]
  • Toloue, I. Damage detection in frame structures using noisy accelerometers and Damage Load Vectors (DLV) [Volume 27, Issue 4, 2020, Pages 1776-1785]
  • Torabi, A. An approximate methodology to simulate combined conduction-radiation heat transfer for multi-layer insulator [Volume 27, Issue 6, 2020, Pages 2924-2932]
  • Torabi Haghighi, A. Lattice Boltzmann solution of advection- dominated mass transport problem: A comparison [Volume 27, Issue 2, 2020, Pages 625-638]
  • Torkaman, H. Optimal sizing of hybrid WT/PV/diesel generator/battery system using MINLP method for a region in Kerman [Volume 27, Issue 6, 2020, Pages 3066-3074]
  • Torkaman, R. A modified indicial functions approximation for nonlinear aeroelastic analysis [Volume 27, Issue 3, 2020, Pages 1230-1254]
  • Torkamany, M.J. Pulsed Nd: YAG laser dissimilar welding of Ti/Al3105 alloys [Volume 27, Issue 4, 2020, Pages 1982-1994]
  • Tsao, Y.C. Product substitution with customer segmentation under panic buying behavior [Volume 27, Issue 5, 2020, Pages 2514-2528]
  • Tu, Y. Applying a change-point control chart based on likelihood ratio to supply chain network monitoring [Volume 27, Issue 5, 2020, Pages 2529-2538]
  • Tunc, H. Simulations of nonlinear advection-diffusion models through various finite element techniques [Volume 27, Issue 6, 2020, Pages 2853-2870]

U

  • Udayabhanu, Udayabhanu Plant-mediated green synthesis of Ag nanoparticles using Rauvolfia tetraphylla (L) flower extracts:Characterization, biological activities, and screening of the catalytic activity in formylation reaction [Volume 27, Issue 6, 2020, Pages 3353-3366]
  • Uk, M.E. Modeling, control, and simulation of a SCARA PRR-type robot manipulator [Volume 27, Issue 1, 2020, Pages 330-340]
  • Ullah, ikram Modeling for radiated Marangoni convection flow of magneto-nanoliquid subject to activation energy and chemical reaction [Volume 27, Issue 6, 2020, Pages 3390-3398]
  • Ullah, Ikram Importance of activation energy and heat source on nanoliquid flow with gyrotactic microorganisms [Volume 27, Issue 6, 2020, Pages 3381-3389]
  • Ullah Khan, S. Analysis of the second-grade fluid flow in a porous channel by Cattaneo-Christov and generalized Fick's theories [Volume 27, Issue 4, 2020, Pages 1945-1954]
  • Ur Rehman, Aziz Analytical view of magnetic hydrodynamic rotating flow of Barium Ferrite nano fluid with viscous dissipation [Volume 27, Issue 6, 2020, Pages 3421-3433]
  • Uygun, O. A novel assessment approach to EFQM driven institutionalization using integrated fuzzy multi-criteria decision-making methods [Volume 27, Issue 2, 2020, Pages 880-892]
  • Uygun, O. Fuzzy cognitive mapping approach to the assessment of Industry 4.0 tendency [Volume 27, Issue 5, 2020, Pages 2635-2643]

V

  • Vafai, A. Dynamic response of concrete funicular shells with a rectangular base under impulse loads [Volume 27, Issue 4, 2020, Pages 1714-1727]
  • Vafai, A. Application of endurance time method in seismic analysis of bridges [Volume 27, Issue 4, 2020, Pages 1751-1761]
  • Vafai, A. Optimal objective function for simulating endurance time excitations [Volume 27, Issue 4, 2020, Pages 1728-1739]
  • Vafai, H. Environmental impact analysis of high-rise buildings for resilient urban development [Volume 27, Issue 4, 2020, Pages 1843-1857]
  • Vaghefi, M. Evaluation of the response modification factor of RC structures constructed with bubble deck system [Volume 27, Issue 4, 2020, Pages 1699-1713]
  • Vahdani, B. Project safety evaluation by a new soft computing approach-based last aggregation hesitant fuzzy complex proportional assessment in construction industry [Volume 27, Issue 2, 2020, Pages 983-1000]
  • Vahdani, B. Designing a resource-constrained project scheduling model considering multiple routes for flexible project activities: Meta-heuristic algorithms [Volume 27, Issue 5, 2020, Pages 2572-2591]
  • Vahdani, H. An integrated lot-sizing model with supplier and carrier selection and quantity discounts considering multiple products [Volume 27, Issue 4, 2020, Pages 2140-2156]
  • Vahidi-Asl, M. Constructing automated test oracle for low observable software [Volume 27, Issue 3, 2020, Pages 1333-1351]
  • Vakili, F. Environmental impact analysis of high-rise buildings for resilient urban development [Volume 27, Issue 4, 2020, Pages 1843-1857]
  • Vakili Tahami, F. Effect of welding parameters on dissimilar pulsed laser joint between nickel-based alloy Hastelloy X and austenitic stainless steel AISI 304L [Volume 27, Issue 5, 2020, Pages 2443-2450]
  • Valtierra-Rodriguez, M. Machine learning in structural engineering [Volume 27, Issue 6, 2020, Pages 2645-2656]
  • Valueian, M. Constructing automated test oracle for low observable software [Volume 27, Issue 3, 2020, Pages 1333-1351]
  • Varsei, Mehdi Electrospinning of smart thermochromic nanofibers as sensors [Volume 27, Issue 6, 2020, Pages 3447-3453]
  • Vazirinia, Y. Chaotic vibrating particles system for resource-constrained project scheduling problem [Volume 27, Issue 4, 2020, Pages 1826-1842]
  • Vazirinia, Y. Smart-home electrical energy scheduling system using multi-objective antlion optimizer and evidential reasoning [Volume 27, Issue 1, 2020, Pages 177-201]
  • Veisi, H. Variance-based features for keyword extraction in Persian and English text documents [Volume 27, Issue 3, 2020, Pages 1301-1315]
  • Veisi, H. A rule-based post-processing approach to improve Persian OCR performance [Volume 27, Issue 6, 2020, Pages 3019-3033]
  • Verma, P. Asymmetrical fuzzy logic control-based MPPT algorithm for stand-alone photovoltaic systems under partially shaded conditions [Volume 27, Issue 6, 2020, Pages 3162-3174]
  • Verma, T. N. Analysis of the effect of temperature on the morphology of egg shell calcium oxide catalyst: Catalyst production for biodiesel preparation [Volume 27, Issue 6, 2020, Pages 2915-2923]
  • Vinyas, M. Influence of areca nut nanofiller on mechanical and tribological properties of coir fibre reinforced epoxy based polymer composite [Volume 27, Issue 4, 2020, Pages 1972-1981]
  • Vishwas, M. Comparative study of damage behavior of synthetic and natural fiber-reinforced brittle composite and natural fiber-reinforced flexible composite subjected to low-velocity impact [Volume 27, Issue 1, 2020, Pages 341-349]
  • Vishwas, M. Influence of areca nut nanofiller on mechanical and tribological properties of coir fibre reinforced epoxy based polymer composite [Volume 27, Issue 4, 2020, Pages 1972-1981]
  • Vossughi, G. Optimal tuner selection using Kalman filter for a real-time modular gas turbine model [Volume 27, Issue 2, 2020, Pages 806-818]
  • Vossughi, Gh. Hyperelastic modeling of sino-nasal tissue for haptic neurosurgery simulation [Volume 27, Issue 3, 2020, Pages 1266-1276]

W

  • Wang, C. Space headway calculation and analysis at turn movement trajectories using hybrid model [Volume 27, Issue 6, 2020, Pages 2669-2679]
  • Wang, J.Q. Trapezoidal neutrosophic aggregation operators and their application to the multi-attribute decision-making process [Volume 27, Issue 3, 2020, Pages 1655-1673]
  • Wang, Q. Effects of content and thickness on the microstructure as well as optical and electrical properties of oxidized Al-doped ZnO Films [Volume 27, Issue 3, 2020, Pages 1019-1027]
  • Wang, Y. DEA altruism and exclusiveness cross-efficiency evaluation models [Volume 27, Issue 5, 2020, Pages 2499-2513]
  • Wee, H.M. Optimal production inventory decision with learning and fatigue behavioral effects in labor-intensive manufacturing [Volume 27, Issue 2, 2020, Pages 918-934]
  • Wu, H. Development of micro gas actuator for analyzing gas mixture [Volume 27, Issue 6, 2020, Pages 2945-2953]
  • Wu, Y. Coordination of traditional and online group-buying channels considering website promotion effort [Volume 27, Issue 4, 2020, Pages 2069-2092]

X

  • Xiao, L. Effects of content and thickness on the microstructure as well as optical and electrical properties of oxidized Al-doped ZnO Films [Volume 27, Issue 3, 2020, Pages 1019-1027]
  • Xu, Yinshan Evaluation of UV aging behaviors of polyphosphoric acid (PPA) modified asphalt and its asphalt mixture [Volume 27, Issue 5, 2020, Pages 2247-2257]
  • Xu, Z. Effects of content and thickness on the microstructure as well as optical and electrical properties of oxidized Al-doped ZnO Films [Volume 27, Issue 3, 2020, Pages 1019-1027]

Y

  • Yaghini, M. Optimization of embedded rail slab track with respect to environmental vibrations [Volume 27, Issue 2, 2020, Pages 529-540]
  • Yaghmaeian, K. Drinking water softening with electrocoagulation process: Influence of direct and alternating currents as inductive with different arrangement rod electrodes and polarity inverter [Volume 27, Issue 3, 2020, Pages 1275-1292]
  • Yalcin, S. A novel assessment approach to EFQM driven institutionalization using integrated fuzzy multi-criteria decision-making methods [Volume 27, Issue 2, 2020, Pages 880-892]
  • Yang, Y. Applying a change-point control chart based on likelihood ratio to supply chain network monitoring [Volume 27, Issue 5, 2020, Pages 2529-2538]
  • Yavari, A. A bi-objective hierarchical hub location model with facility failure [Volume 27, Issue 4, 2020, Pages 2009-2020]
  • Ye, Z. Space headway calculation and analysis at turn movement trajectories using hybrid model [Volume 27, Issue 6, 2020, Pages 2669-2679]
  • Yi, J. Effect of hygro-thermal loading on the two-dimensional response of a functionally graded piezomagnetic cylinder under asymmetric loads [Volume 27, Issue 4, 2020, Pages 1916-1932]
  • Yildiz, M.Z. A Novel Inductive Tactile Probe Design for Lump Detection in Soft Tissue Phantoms [Volume 27, Issue 6, 2020, Pages 3118-3127]
  • Yousefi, S. Attitude-Based Conflict Management for Resolving Disputes over Water Quality of the Seymareh River in Iran [Volume 27, Issue 1, 2020, Pages 25-40]
  • Yousefi Yegane, B. Influence of Two Different Producers in a Competitive Location Problem [Volume 27, Issue 5, 2020, Pages 2539-2554]
  • Yousefzadeh, M. Adaptive control of a cable-actuated parallel manipulator mounted on a platform with differential wheels under payload uncertainty [Volume 27, Issue 1, 2020, Pages 273-286]
  • Yunus, N.Z.M. Sustainable use of stabilized flood mud as subgrade soil for low volume traffic roads [Volume 27, Issue 6, 2020, Pages 2719-2726]

Z

  • Zacchei, E. Application of artificial accelerograms to estimating damage to dams using failure criteria [Volume 27, Issue 6, 2020, Pages 2740-2751]
  • Zakerzadeh, M.R. Size dependent analysis of tapered FG micro-bridge based on a 3D beam theory [Volume 27, Issue 6, 2020, Pages 2889-2901]
  • Zamanian, M. Effect of stress direction on the undrained monotonic and cyclic behavior of dense sands [Volume 27, Issue 2, 2020, Pages 551-565]
  • Zamanian, M. Nonlinear vibration analysis of a partially coated circular microplate under electrostatic actuationpartially coated circular microplate under electrostatic actuation [Volume 27, Issue 2, 2020, Pages 715-729]
  • Zandieh, M. A multi-stage stochastic programming model for sustainable closed-loop supply chain network design with financial decisions: A case study of plastic production and recycling supply chain [Volume 27, Issue 1, 2020, Pages 377-395]
  • Zardari, M.A. Suitability of brick kiln waste as a stabilizer for clayey soils [Volume 27, Issue 5, 2020, Pages 2258-2263]
  • Zardari, M.A. A new approach to improving durability of rice husk ash blended concrete with re-dispersible polymer powder [Volume 27, Issue 4, 2020, Pages 1858-1865]
  • Zare Chavoshi, A. Instantaneous thrust control of linear switched reluctance motors with segmental translator [Volume 27, Issue 6, 2020, Pages 3140-3149]
  • Zarif Sanayei, H. R. A regression-based approach to the prediction of crest settlement of embankment dams under earthquake shaking [Volume 27, Issue 2, 2020, Pages 671-681]
  • Zarrati, A.R. Riprap design at bridge piers with limited scouring [Volume 27, Issue 2, 2020, Pages 588-595]
  • Zeinalzadeh, A. Experimental investigation of shock wave oscillation on a thin supercritical airfoil [Volume 27, Issue 2, 2020, Pages 795-805]
  • Zhang, Y. Optimal production inventory decision with learning and fatigue behavioral effects in labor-intensive manufacturing [Volume 27, Issue 2, 2020, Pages 918-934]
  • Zhao, Y. Tensile creep monitoring of basalt fiber-reinforced polymer plates via electrical potential change and artificial neural network [Volume 27, Issue 4, 2020, Pages 1995-2008]
  • Zhong, J. Applying a change-point control chart based on likelihood ratio to supply chain network monitoring [Volume 27, Issue 5, 2020, Pages 2529-2538]
  • Zhou, Q. Optical solitons in birefringent fibers with four-wave mixing by extended trial equation method [Volume 27, Issue 6, 2020, Pages 3035-3052]
  • Zhou, Shengbo Evaluation of UV aging behaviors of polyphosphoric acid (PPA) modified asphalt and its asphalt mixture [Volume 27, Issue 5, 2020, Pages 2247-2257]
  • Ziaie Moayed, R. Prediction of subgrade reaction modulus of clayey soil using group method of data handling [Volume 27, Issue 4, 2020, Pages 1740-1750]
  • Zindani, D. Design of mixed flow pump impeller blade using mean streamline theory and its analysis [Volume 27, Issue 1, 2020, Pages 350-360]
  • Zirak, M. N-(2-pyridylmethyl)-L-histidine functionalized Fe3O4 magnetic nanoparticles as an efficient catalyst for synthesis of β-amino ketones [Volume 27, Issue 3, 2020, Pages 1207-1215]
  • Zohrabi, F. Modified quasi-Y-source converter for increasing boost factor [Volume 27, Issue 3, 2020, Pages 1494-1505]