Scientia Iranica - Author Index

A

Abbasian, M. Exfoliated poly (styrene-co-urethane) grafted-poly methylmethacrylate/layered double hydroxide nanocomposite synthesized by metal catalyzed living radical polymerization and solvent blending method [Volume 31, Issue 9, 2024, Pages 681-691]
Abdalla, H. A. Improvement of the axial-jet-pump performance using modified mixing chamber configuration and inlet swirling flow [Volume 31, Issue 1, 2024, Pages 26-42]
Abdollahi, Y. Control and performance assessment of grid-connected PMSG-based wind turbine equipped with diode bridge rectifier and boost converter using three different control strategies [Volume 31, Issue 14, 2024, Pages 1206-1221]
Abooie, M. H. An integrated model for optimal selection of quality, maintenance, and production parameters with autocorrelated data [Volume 31, Issue 3, 2024, Pages 206-227]
Adel, W. On numerical solutions of telegraph, viscous, and modified Burgers equations via Bernoulli collocation method [Volume 31, Issue 1, 2024, Pages 43-54]
Adlparvar, M.R. An intuitionistic fuzzy multi-class approach to risk assessment for sustainable BOT highway construction projects: A case study [Volume 31, Issue 7, 2024, Pages 569-587]
Afrasiab, H. A study on the effect of the die transverse angle and the part rotational feed angle in the cold radial forging process of rods [Volume 31, Issue 8, 2024, Pages 646-658]
Aghsami, A. A stochastic-fuzzy multi-objective model for the last-mile delivery problem using drones and ground vehicles, a case study [Volume 31, Issue 11, 2024, Pages 847-865]
Agrahari, S. EBG and SRR loaded triple band notched UWB antenna [Volume 31, Issue 5, 2024, Pages 458-468]
Ahmed, S. TDE based model-free control for rigid robotic manipulators under nonlinear friction [Volume 31, Issue 2, 2024, Pages 137-148]
Ahrabi Tabriz, M. Visual creativity through concept combination using quantum cognitive models [Volume 31, Issue 2, 2024, Pages 118-135]
Akbari Resketi, H. R. Fault-tolerant capability analysis of six-phase induction motor with distributed, concentrated, and pseudo-concentrated windings [Volume 31, Issue 10, 2024, Pages 775-789]
Alavi, S. M. Stance detection on social media, case study: Persian sentences using deep learning architecture [Volume 31, Issue 10, 2024, Pages 764-773]
Al-den, D. J. Fakar Investigation of structural, photo-luminescence and self-cleaning properties of thin layers of GO-ZnO and GO, GO-Ag and composite bilayer of GO-ZnO/GO-Ag prepared by spray pyrolysis method [Volume 31, Issue 12, 2024, Pages 958-966]
Alduwaib, S. M. Investigation of structural, photo-luminescence and self-cleaning properties of thin layers of GO-ZnO and GO, GO-Ag and composite bilayer of GO-ZnO/GO-Ag prepared by spray pyrolysis method [Volume 31, Issue 12, 2024, Pages 958-966]
Alekya, P. Python programming predictions of thermal behavioral aspects of orange peel and coconut-coir reinforced epoxy composites [Volume 31, Issue 8, 2024, Pages 659-666]
Alemi-Rostami, M. Fault-tolerant capability analysis of six-phase induction motor with distributed, concentrated, and pseudo-concentrated windings [Volume 31, Issue 10, 2024, Pages 775-789]
Ali, M. Entropy generation analysis for chemically reactive flow of Sutterby nanofluid considering radiation aspects [Volume 31, Issue 12, 2024, Pages 935-944]
Alpay, S. Integrated cell formation and part scheduling: A new mathematical model along with two meta-heuristics and a case study for truck industry [Volume 31, Issue 11, 2024, Pages 888-905]
Ammar, S. I. Analysis of Stationary Fluid Queue Driven by State-Dependent Birth-Death Process Subject to Catastrophes [Volume 31, Issue 14, 2024, Pages 1149-1158]
Anjum, N. Entropy generation analysis for chemically reactive flow of Sutterby nanofluid considering radiation aspects [Volume 31, Issue 12, 2024, Pages 935-944]
Asgarian Dehkordi, H. A novel approach for vehicle identification based on image registration and deep learning [Volume 31, Issue 5, 2024, Pages 431-440]
Asgarian Dehkordi, R. A novel approach for vehicle identification based on image registration and deep learning [Volume 31, Issue 5, 2024, Pages 431-440]
Asghari Rad, H. Optimal allocation of plug-in electric vehicle parking lots for maximum serviceability and profit in the coupled distribution and transportation networks [Volume 31, Issue 14, 2024, Pages 1178-1196]
Ashtiani, M. Visual creativity through concept combination using quantum cognitive models [Volume 31, Issue 2, 2024, Pages 118-135]
Ashtiani, M. A self-adaptive approach to job scheduling in cloud computing environments [Volume 31, Issue 5, 2024, Pages 373-387]
Aslam, M. Percentile bootstrap control chart for monitoring process variability under non-normal processes [Volume 31, Issue 15, 2024, Pages 1282-1292]
Atagun, A. O. Decompositions of soft sets and soft matrices with applications in group decision making [Volume 31, Issue 6, 2024, Pages 518-534]
Atakan Akar, M. Investigation on flow characteristics of generic car body with different boundary conditions [Volume 31, Issue 13, 2024, Pages 1077-1089]
Azeem Khan, W. Entropy generation analysis for chemically reactive flow of Sutterby nanofluid considering radiation aspects [Volume 31, Issue 12, 2024, Pages 935-944]

B

Babapoor, A. Effects of different designs of pressure vessels on efficiency and energy consumption of reverse osmosis systems [Volume 31, Issue 9, 2024, Pages 718-726]
Bagheri, H. PEBA/Na-X multilayer hybrid membrane for CO2 separation: Influence of Na-X zeolite layer synthesis condition [Volume 31, Issue 9, 2024, Pages 704-717]
Bahri, H. CNUIML: Towards the automatic generation of enterprise-level rich internet applications using controlled natural user interface modeling language [Volume 31, Issue 10, 2024, Pages 750-763]
Bajaj, R. K. T -spherical fuzzy soft matrices with applications in decision-making and selection process [Volume 31, Issue 15, 2024, Pages 1313-1329]
Bakirci, M. Tuning the preferential direction of ion flow in asymmetric nanofluidic mediums [Volume 31, Issue 12, 2024, Pages 920-934]
Baradaran Kazemzadeh, R. A mathematical negotiation mechanism for distributed procurement problems and a hybrid algorithm for its solution [Volume 31, Issue 11, 2024, Pages 805-824]
Barzegar, B. CNUIML: Towards the automatic generation of enterprise-level rich internet applications using controlled natural user interface modeling language [Volume 31, Issue 10, 2024, Pages 750-763]
Bas, O. Investigation on flow characteristics of generic car body with different boundary conditions [Volume 31, Issue 13, 2024, Pages 1077-1089]
Bashiri, Mahdi Uncertain model of industrial clusters for the optimal arrangement of co-operation networks under sustainable and dynamic conditions [Volume 31, Issue 3, 2024, Pages 228-251]
B. Das, D. Delamination localization in the composite thin plates using ensemble learning: Bagging and boosting techniques [Volume 31, Issue 4, 2024, Pages 310-329]
Bedram, Ahmad A novel method (a tube with successive increase and reduction in diameter) to increase nanofluid heat transfer in a tube [Volume 31, Issue 13, 2024, Pages 1030-1042]
Beghdadi, A. Re-identification in video surveillance systems considering appearance changes [Volume 31, Issue 2, 2024, Pages 103-117]
Beheshti, Z. A MapReduce-based big data clustering using swarm-inspired meta-heuristic algorithms [Volume 31, Issue 10, 2024, Pages 737-749]
Behmanesh, R. A new mathematical formulation and a hybrid evolutionary algorithm for re-entrant flow-shop problem with release date [Volume 31, Issue 6, 2024, Pages 500-517]
Behzadipour, S. Mechanical design of a 5-DOF robotic interface for application in haptic simulation systems of large-organ laparoscopic surgery [Volume 31, Issue 1, 2024, Pages 1-14]
Bharath, K. N. Mechanical behavior and sliding wear assessment of Al2024/TiC metal matrix composite using Taguchi and spotted hyena optimization [Volume 31, Issue 13, 2024, Pages 1063-1076]
Buruk Sahin, Y. Integrated cell formation and part scheduling: A new mathematical model along with two meta-heuristics and a case study for truck industry [Volume 31, Issue 11, 2024, Pages 888-905]

C

Chakraborty, S. Discriminant analysis-based parametric study of an electrical discharge machining process [Volume 31, Issue 3, 2024, Pages 186-205]
Chaurasiya, V. Kumar On the solutal and thermal Marangoni convection arising in the self-rewetting fluid flow under hydromagnetic consideration [Volume 31, Issue 13, 2024, Pages 1007-1019]

D

Daneshmand, A. H. Performance evaluation of modified tuned liquid dampers for seismic response control of nonlinear benchmark buildings [Volume 31, Issue 7, 2024, Pages 588-602]
Das, O. Delamination localization in the composite thin plates using ensemble learning: Bagging and boosting techniques [Volume 31, Issue 4, 2024, Pages 310-329]
Deda Altan, B. Improvement of Savonius wind turbine performance with using wind collector [Volume 31, Issue 13, 2024, Pages 1020-1029]
Dolatnezhadsomarin, A. New decision-making methods for ranking of non-dominated points for multi-objective optimization problems [Volume 31, Issue 3, 2024, Pages 252-268]

E

Ebrahimi, H. Minimum stiffness and optimal position of intermediate elastic support to maximize the fundamental frequency of a vibrating Timoshenko beam [Volume 31, Issue 13, 2024, Pages 967-979]
El-Behery, S. M. Improvement of the axial-jet-pump performance using modified mixing chamber configuration and inlet swirling flow [Volume 31, Issue 1, 2024, Pages 26-42]
Esmaeili, V. COVID-19 diagnosis: ULGFBP-ResNet51 approach on the CT and the chest X-ray images classiffcation [Volume 31, Issue 14, 2024, Pages 1091-1104]
Esmaeilian, Gh. Uncertain model of industrial clusters for the optimal arrangement of co-operation networks under sustainable and dynamic conditions [Volume 31, Issue 3, 2024, Pages 228-251]
Esmaeili Nezhad, A. Investigation of transformer vibration characteristics using the finite element method [Volume 31, Issue 5, 2024, Pages 441-457]
Ethiraj, N. Multi response optimization of friction stir welding in air and water by analytic hierarchy process and VIKOR method [Volume 31, Issue 4, 2024, Pages 346-357]
Ezzatneshan, E. Effect of surface topology and wettability on impacting droplet dynamics at moderate Reynolds numbers [Volume 31, Issue 8, 2024, Pages 667-680]

F

Fallah Nezhad, M.S. An integrated model for optimal selection of quality, maintenance, and production parameters with autocorrelated data [Volume 31, Issue 3, 2024, Pages 206-227]
Farahmand, F. Mechanical design of a 5-DOF robotic interface for application in haptic simulation systems of large-organ laparoscopic surgery [Volume 31, Issue 1, 2024, Pages 1-14]
Farzi, S. Stance detection on social media, case study: Persian sentences using deep learning architecture [Volume 31, Issue 10, 2024, Pages 764-773]
Fattahi, A. Effect of surface topology and wettability on impacting droplet dynamics at moderate Reynolds numbers [Volume 31, Issue 8, 2024, Pages 667-680]
Fattahpoor Roushan, M. A study on the effect of the die transverse angle and the part rotational feed angle in the cold radial forging process of rods [Volume 31, Issue 8, 2024, Pages 646-658]
Fu, X. Risk governance mechanism of food safety based on product reputation [Volume 31, Issue 3, 2024, Pages 175-185]

G

Ganesan, K. Cooling performance of turning M2 steel by using copper nano fluids [Volume 31, Issue 13, 2024, Pages 1043-1055]
Gangadharaiah, Y. H. Effect of variable heat source and gravity variance on the convection in porous layer with temperature dependent viscosity [Volume 31, Issue 13, 2024, Pages 1056-1062]
Garren, R. Tuning the preferential direction of ion flow in asymmetric nanofluidic mediums [Volume 31, Issue 12, 2024, Pages 920-934]
Ghabraei, S. Conceptual modeling and parametric study of the nonlinear dynamics of the floating wind turbine in the presence of primary and internal resonance [Volume 31, Issue 4, 2024, Pages 330-345]
Ghasemi Karaj-Abad, S. Exfoliated poly (styrene-co-urethane) grafted-poly methylmethacrylate/layered double hydroxide nanocomposite synthesized by metal catalyzed living radical polymerization and solvent blending method [Volume 31, Issue 9, 2024, Pages 681-691]
Ghiasvand Ghiasi, F. Multi-depot home health care routing and scheduling problem with multimodal transportation: Mathematical model and solution methods [Volume 31, Issue 11, 2024, Pages 825-846]
Ghourejili, Sh. Effects of different designs of pressure vessels on efficiency and energy consumption of reverse osmosis systems [Volume 31, Issue 9, 2024, Pages 718-726]
Ghous, I. TDE based model-free control for rigid robotic manipulators under nonlinear friction [Volume 31, Issue 2, 2024, Pages 137-148]
Giri, B. C. Coordinating a closed-loop green supply chain for bremanufactured product under competition [Volume 31, Issue 11, 2024, Pages 866-887]
Guleria, A. T -spherical fuzzy soft matrices with applications in decision-making and selection process [Volume 31, Issue 15, 2024, Pages 1313-1329]
Gungor, A. Improvement of Savonius wind turbine performance with using wind collector [Volume 31, Issue 13, 2024, Pages 1020-1029]
Gurusamy, P. Cooling performance of turning M2 steel by using copper nano fluids [Volume 31, Issue 13, 2024, Pages 1043-1055]

H

Haghighi, H. Doctor Code: A machine learning-based approach to program repair [Volume 31, Issue 2, 2024, Pages 83-102]
Halvaei Niasar, A. Control and performance assessment of grid-connected PMSG-based wind turbine equipped with diode bridge rectifier and boost converter using three different control strategies [Volume 31, Issue 14, 2024, Pages 1206-1221]
Hamidi, A. A new hybrid analytical model based on winding function theory for analysis of unbalanced two-phase induction motors [Volume 31, Issue 2, 2024, Pages 149-160]
Han, G. Risk governance mechanism of food safety based on product reputation [Volume 31, Issue 3, 2024, Pages 175-185]
Hasani, S. M. R. A resilient supply chain network for an online retailer: A three-phase robust framework and a case study [Volume 31, Issue 15, 2024, Pages 1237-1255]
Hasanzadeh, S. Performance improvement of the hybrid switch reluctance motor by notching method [Volume 31, Issue 10, 2024, Pages 790-797]
Hassanpour, H. Re-identification in video surveillance systems considering appearance changes [Volume 31, Issue 2, 2024, Pages 103-117]
Hatami, S. Iranian license plate recognition using a reliable deep learning approach [Volume 31, Issue 14, 2024, Pages 1105-1121]
Hejri, M. Practical stability analysis and switching controller synthesis for discrete-time switched affine systems via linear matrix inequalities [Volume 31, Issue 14, 2024, Pages 1159-1177]
Hejri, M. Corrections to On the global practical stabilization of discrete-time switched affine systems: Application to switching power converters" [Scientia Iranica (2021) 28(3), 1621-1642] and Global practical stabilization of discrete-time switched affine systems via switched Lyapunov functions and state-dependent switching functions", [Scientia Iranica (2021) 28(3), 1606-1620] [Volume 31, Issue 10, 2024, Pages 798-803]
Heydary Joonaghany, Gh. Stance detection on social media, case study: Persian sentences using deep learning architecture [Volume 31, Issue 10, 2024, Pages 764-773]
Hobiny, A. Entropy generation analysis for chemically reactive flow of Sutterby nanofluid considering radiation aspects [Volume 31, Issue 12, 2024, Pages 935-944]
Hosseini, M. A new hybrid analytical model based on winding function theory for analysis of unbalanced two-phase induction motors [Volume 31, Issue 2, 2024, Pages 149-160]
Hosseini, S. M. Optimal allocation of plug-in electric vehicle parking lots for maximum serviceability and profit in the coupled distribution and transportation networks [Volume 31, Issue 14, 2024, Pages 1178-1196]
Hosseinzadeh, M. Exfoliated poly (styrene-co-urethane) grafted-poly methylmethacrylate/layered double hydroxide nanocomposite synthesized by metal catalyzed living radical polymerization and solvent blending method [Volume 31, Issue 9, 2024, Pages 681-691]
Hu, X. l. Monitoring coefficient of variation using variable sampling interval double exponentially weighted moving average charts [Volume 31, Issue 15, 2024, Pages 1293-1312]
Husseinzadeh Kashan, A. A mathematical negotiation mechanism for distributed procurement problems and a hybrid algorithm for its solution [Volume 31, Issue 11, 2024, Pages 805-824]

I

Ibrahim, K. A. Improvement of the axial-jet-pump performance using modified mixing chamber configuration and inlet swirling flow [Volume 31, Issue 1, 2024, Pages 26-42]
Inc, M. On numerical solutions of telegraph, viscous, and modified Burgers equations via Bernoulli collocation method [Volume 31, Issue 1, 2024, Pages 43-54]

J

Jabal Ameli, A. On the maximum triangle problem [Volume 31, Issue 14, 2024, Pages 1143-1148]
Jafari, B. Hyperelastic and viscoelastic modeling of the ovine intervertebral disc tissue [Volume 31, Issue 4, 2024, Pages 295-309]
Jafari, H. Nurse scheduling problem by considering total number of required nurses as well as nurses' preferences for working shifts: An algorithmic game-theoretic approach [Volume 31, Issue 15, 2024, Pages 1265-1281]
Jafarian-Namin, S. An integrated model for optimal selection of quality, maintenance, and production parameters with autocorrelated data [Volume 31, Issue 3, 2024, Pages 206-227]
Jafari-Nokandi, M. Optimal allocation of plug-in electric vehicle parking lots for maximum serviceability and profit in the coupled distribution and transportation networks [Volume 31, Issue 14, 2024, Pages 1178-1196]
Jafari Talookolaei, R. A. A study on the effect of the die transverse angle and the part rotational feed angle in the cold radial forging process of rods [Volume 31, Issue 8, 2024, Pages 646-658]
Jahed-Motlagh, M. R. Visual creativity through concept combination using quantum cognitive models [Volume 31, Issue 2, 2024, Pages 118-135]
Jamali, F. Sadat Iranian license plate recognition using a reliable deep learning approach [Volume 31, Issue 14, 2024, Pages 1105-1121]
Jamil, N. Cubic bipolar fuzzy aggregation operator with priority degree with multi-criteria decision-making [Volume 31, Issue 5, 2024, Pages 388-416]
Jamshidifar, H. Mechanical design of a 5-DOF robotic interface for application in haptic simulation systems of large-organ laparoscopic surgery [Volume 31, Issue 1, 2024, Pages 1-14]
Jiang, T. Analysis of Stationary Fluid Queue Driven by State-Dependent Birth-Death Process Subject to Catastrophes [Volume 31, Issue 14, 2024, Pages 1149-1158]
Jolai, F. A stochastic-fuzzy multi-objective model for the last-mile delivery problem using drones and ground vehicles, a case study [Volume 31, Issue 11, 2024, Pages 847-865]
Joshi, A. G. Mechanical behavior and sliding wear assessment of Al2024/TiC metal matrix composite using Taguchi and spotted hyena optimization [Volume 31, Issue 13, 2024, Pages 1063-1076]

K

Kaheh, Z. A mathematical negotiation mechanism for distributed procurement problems and a hybrid algorithm for its solution [Volume 31, Issue 11, 2024, Pages 805-824]
Kakavand, F. Minimum stiffness and optimal position of intermediate elastic support to maximize the fundamental frequency of a vibrating Timoshenko beam [Volume 31, Issue 13, 2024, Pages 967-979]
Kamaci, H. Decompositions of soft sets and soft matrices with applications in group decision making [Volume 31, Issue 6, 2024, Pages 518-534]
Kamal, S. Percentile bootstrap control chart for monitoring process variability under non-normal processes [Volume 31, Issue 15, 2024, Pages 1282-1292]
Kamlesh Shah, Sh. Experimental and numerical analysis of novel 9-DOF robotic manipulator for computed tomography guided medical procedure [Volume 31, Issue 8, 2024, Pages 619-631]
Karamodin, A. Performance evaluation of modified tuned liquid dampers for seismic response control of nonlinear benchmark buildings [Volume 31, Issue 7, 2024, Pages 588-602]
Karimi, S. Impact of sodium carbonate on seepage reduction in farm irrigation ponds [Volume 31, Issue 7, 2024, Pages 556-568]
Kazemeini, M. Effects of the microchannel shape upon droplet formations during synthesis of nanoparticles [Volume 31, Issue 9, 2024, Pages 727-736]
Kazemi, A. Multi-depot home health care routing and scheduling problem with multimodal transportation: Mathematical model and solution methods [Volume 31, Issue 11, 2024, Pages 825-846]
Keiyinci, S. Investigation on flow characteristics of generic car body with different boundary conditions [Volume 31, Issue 13, 2024, Pages 1077-1089]
Kemaneci, H. Ibrahim Thermal Comfort and Energy Analysis in Ceramic Tile [Volume 31, Issue 13, 2024, Pages 993-1006]
Keshwala, U. Design and analysis of metamaterial integrated modified golden spiral antenna for Terahertz applications [Volume 31, Issue 14, 2024, Pages 1197-1205]
Keynia, F. Optimized deep networks structure to improve the accuracy of estimator algorithm in deep networks learning [Volume 31, Issue 5, 2024, Pages 417-429]
Khader, M.M. Numerical treatment for a nine-dimensional chaotic Lorenz model with the Rabotnov fractional-exponential kernel fractional derivative [Volume 31, Issue 12, 2024, Pages 945-957]
Khamedi, R. Modeling and multi-objective optimization of low-frequency vibration-assisted chemical machining using central composite design in response surface methodology [Volume 31, Issue 13, 2024, Pages 980-992]
Khan, A. A. Study of peristaltic transport of a dusty second-grade fluid in a curved configuration [Volume 31, Issue 1, 2024, Pages 15-25]
Khan, M. Energy optimization of water-based hybrid nanomaterials over a wedge-shaped channel [Volume 31, Issue 1, 2024, Pages 71-82]
Kheirkhah, A. Joint production-planning and distribution optimization of perishable products under a combined shipment structure: A new hybrid policy-based approach [Volume 31, Issue 6, 2024, Pages 481-499]
Khorram, E. New decision-making methods for ranking of non-dominated points for multi-objective optimization problems [Volume 31, Issue 3, 2024, Pages 252-268]
Khosravi, H. A novel approach for vehicle identification based on image registration and deep learning [Volume 31, Issue 5, 2024, Pages 431-440]
Khosroabadi, A. Effect of surface topology and wettability on impacting droplet dynamics at moderate Reynolds numbers [Volume 31, Issue 8, 2024, Pages 667-680]
Kianfar, F. A very fast method for guaranteed generation of one facet for 0-1 knapsack polyhedron [Volume 31, Issue 6, 2024, Pages 535-539]
Kianfar, K. A new mathematical formulation and a hybrid evolutionary algorithm for re-entrant flow-shop problem with release date [Volume 31, Issue 6, 2024, Pages 500-517]
Kianfar, K. A very fast method for guaranteed generation of one facet for 0-1 knapsack polyhedron [Volume 31, Issue 6, 2024, Pages 535-539]
Kilany, N. M. Analysis of Stationary Fluid Queue Driven by State-Dependent Birth-Death Process Subject to Catastrophes [Volume 31, Issue 14, 2024, Pages 1149-1158]
Kohan, F. Joint optimization of pricing, inventory control, and preservation technology investment under both quality and quantity deteriorating [Volume 31, Issue 3, 2024, Pages 269-281]
Kose, R. Thermal Comfort and Energy Analysis in Ceramic Tile [Volume 31, Issue 13, 2024, Pages 993-1006]
Kumar, S. Mechanical behavior and sliding wear assessment of Al2024/TiC metal matrix composite using Taguchi and spotted hyena optimization [Volume 31, Issue 13, 2024, Pages 1063-1076]

L

Lashkar-Ara, B. Impact of sodium carbonate on seepage reduction in farm irrigation ponds [Volume 31, Issue 7, 2024, Pages 556-568]
Le, H.Q.-Ph. Robust forensic-based investigation algorithm for resource leveling in multiple projects [Volume 31, Issue 7, 2024, Pages 603-618]
Le, Th.-T. Robust forensic-based investigation algorithm for resource leveling in multiple projects [Volume 31, Issue 7, 2024, Pages 603-618]

M

Ma, X. Application of a novel quadratic polynomial discrete grey model to forecast energy consumption of China [Volume 31, Issue 6, 2024, Pages 469-480]
Magesh, A. Peristaltic motion of non-Newtonian fluid under the influence of inclined magnetic field, porous medium, and chemical reaction [Volume 31, Issue 8, 2024, Pages 632-645]
Manjaiah, M. Mechanical behavior and sliding wear assessment of Al2024/TiC metal matrix composite using Taguchi and spotted hyena optimization [Volume 31, Issue 13, 2024, Pages 1063-1076]
Manjunatha, N. Effect of variable heat source and gravity variance on the convection in porous layer with temperature dependent viscosity [Volume 31, Issue 13, 2024, Pages 1056-1062]
Masehian, E. A mathematical negotiation mechanism for distributed procurement problems and a hybrid algorithm for its solution [Volume 31, Issue 11, 2024, Pages 805-824]
Mebarek-Oudina, F. Effect of variable heat source and gravity variance on the convection in porous layer with temperature dependent viscosity [Volume 31, Issue 13, 2024, Pages 1056-1062]
Mehri, R. Performance improvement of a system-level harmonic using a harmonic power flow controller [Volume 31, Issue 2, 2024, Pages 161-173]
Meikeerthy, S. Multi response optimization of friction stir welding in air and water by analytic hierarchy process and VIKOR method [Volume 31, Issue 4, 2024, Pages 346-357]
Mirbagheri, A. Mechanical design of a 5-DOF robotic interface for application in haptic simulation systems of large-organ laparoscopic surgery [Volume 31, Issue 1, 2024, Pages 1-14]
Mishra, R. Experimental and numerical analysis of novel 9-DOF robotic manipulator for computed tomography guided medical procedure [Volume 31, Issue 8, 2024, Pages 619-631]
Moghadam-Rad, F. The effect of dolphin echolocation-fuzzy logic controller in semi-active control of structural systems using endurance time method [Volume 31, Issue 7, 2024, Pages 511-555]
Mohamamdi, M. M. Multi-objective optimization of electrochemical finishing for attaining the required surface finish and geometric accuracy in the hole-making process [Volume 31, Issue 4, 2024, Pages 283-294]
Mohammadi, M. M. Modeling and multi-objective optimization of low-frequency vibration-assisted chemical machining using central composite design in response surface methodology [Volume 31, Issue 13, 2024, Pages 980-992]
Mohammadi, S. M. Stance detection on social media, case study: Persian sentences using deep learning architecture [Volume 31, Issue 10, 2024, Pages 764-773]
Moharrami, R. Multi-objective optimization of electrochemical finishing for attaining the required surface finish and geometric accuracy in the hole-making process [Volume 31, Issue 4, 2024, Pages 283-294]
Mohassel Feghhi, M. COVID-19 diagnosis: ULGFBP-ResNet51 approach on the CT and the chest X-ray images classiffcation [Volume 31, Issue 14, 2024, Pages 1091-1104]
Mohtashami, Z. A resilient supply chain network for an online retailer: A three-phase robust framework and a case study [Volume 31, Issue 15, 2024, Pages 1237-1255]
Mokhtari, H. Performance improvement of a system-level harmonic using a harmonic power flow controller [Volume 31, Issue 2, 2024, Pages 161-173]
Mondal, C. Coordinating a closed-loop green supply chain for bremanufactured product under competition [Volume 31, Issue 11, 2024, Pages 866-887]
Moosavi, Sh. Doctor Code: A machine learning-based approach to program repair [Volume 31, Issue 2, 2024, Pages 83-102]
Moradi, H. Conceptual modeling and parametric study of the nonlinear dynamics of the floating wind turbine in the presence of primary and internal resonance [Volume 31, Issue 4, 2024, Pages 330-345]
Mortezaie, Z. Re-identification in video surveillance systems considering appearance changes [Volume 31, Issue 2, 2024, Pages 103-117]
Motameni, H. CNUIML: Towards the automatic generation of enterprise-level rich internet applications using controlled natural user interface modeling language [Volume 31, Issue 10, 2024, Pages 750-763]
Mumtaz, F. TDE based model-free control for rigid robotic manipulators under nonlinear friction [Volume 31, Issue 2, 2024, Pages 137-148]

N

Nabatian, N. Thermal analysis of the designed CPC and its efficiency improvement by MPPT control [Volume 31, Issue 4, 2024, Pages 358-371]
Nadi, Z. An effective dispersive liquid-liquid microextraction method for pharmaceutical extraction: Optimization via central composite design [Volume 31, Issue 9, 2024, Pages 693-703]
Najafi, L. Impact of sodium carbonate on seepage reduction in farm irrigation ponds [Volume 31, Issue 7, 2024, Pages 556-568]
Naresh Babu, M. Cooling performance of turning M2 steel by using copper nano fluids [Volume 31, Issue 13, 2024, Pages 1043-1055]
Nasiri, M. M. A resilient supply chain network for an online retailer: A three-phase robust framework and a case study [Volume 31, Issue 15, 2024, Pages 1237-1255]
Nasiri, N. Thermal analysis of the designed CPC and its efficiency improvement by MPPT control [Volume 31, Issue 4, 2024, Pages 358-371]
Nemati, B. Multi-objective optimization of electrochemical finishing for attaining the required surface finish and geometric accuracy in the hole-making process [Volume 31, Issue 4, 2024, Pages 283-294]
Nezami, M. An intuitionistic fuzzy multi-class approach to risk assessment for sustainable BOT highway construction projects: A case study [Volume 31, Issue 7, 2024, Pages 569-587]
Nguyen, N.-Th. Robust forensic-based investigation algorithm for resource leveling in multiple projects [Volume 31, Issue 7, 2024, Pages 603-618]
Nodehi, A. Process mining-based business process management architecture: A case study in smart factories [Volume 31, Issue 14, 2024, Pages 1122-1142]

O

Olyai, A. Process mining-based business process management architecture: A case study in smart factories [Volume 31, Issue 14, 2024, Pages 1122-1142]

P

Pirhady Tavandashti, N. Electrodeposition of hierarchically structured superhydrophobic Ni-PTFE composite coating with remarkable corrosion resistance, chemical and mechanical stability [Volume 31, Issue 12, 2024, Pages 907-919]
Pujari, S. Python programming predictions of thermal behavioral aspects of orange peel and coconut-coir reinforced epoxy composites [Volume 31, Issue 8, 2024, Pages 659-666]

R

Rafiee, M. A very fast method for guaranteed generation of one facet for 0-1 knapsack polyhedron [Volume 31, Issue 6, 2024, Pages 535-539]
Rafiei Atani, T. Visual creativity through concept combination using quantum cognitive models [Volume 31, Issue 2, 2024, Pages 118-135]
Rahbar-Kelishami, A. An effective dispersive liquid-liquid microextraction method for pharmaceutical extraction: Optimization via central composite design [Volume 31, Issue 9, 2024, Pages 693-703]
Rahimi, M. Control and performance assessment of grid-connected PMSG-based wind turbine equipped with diode bridge rectifier and boost converter using three different control strategies [Volume 31, Issue 14, 2024, Pages 1206-1221]
Rahmani, J. Modeling and multi-objective optimization of low-frequency vibration-assisted chemical machining using central composite design in response surface methodology [Volume 31, Issue 13, 2024, Pages 980-992]
Rahmani Fard, J. Multi-objective design optimization of a hybrid excitation flux switching permanent magnet motor based on design sensitivity analysis [Volume 31, Issue 14, 2024, Pages 1222-1235]
Rahmani Mokarrari, K. A stochastic-fuzzy multi-objective model for the last-mile delivery problem using drones and ground vehicles, a case study [Volume 31, Issue 11, 2024, Pages 847-865]
Raji, F. Effects of the microchannel shape upon droplet formations during synthesis of nanoparticles [Volume 31, Issue 9, 2024, Pages 727-736]
Rasay, H. Monitoring lifetime data for a failure censoring reliability test with replacement using Shewhart type and exponentially weighted moving average control charts [Volume 31, Issue 15, 2024, Pages 1256-1264]
Rasizadeh, M. Exfoliated poly (styrene-co-urethane) grafted-poly methylmethacrylate/layered double hydroxide nanocomposite synthesized by metal catalyzed living radical polymerization and solvent blending method [Volume 31, Issue 9, 2024, Pages 681-691]
Rathi, A. EBG and SRR loaded triple band notched UWB antenna [Volume 31, Issue 5, 2024, Pages 458-468]
Rawat, S. Design and analysis of metamaterial integrated modified golden spiral antenna for Terahertz applications [Volume 31, Issue 14, 2024, Pages 1197-1205]
Ray, K. Design and analysis of metamaterial integrated modified golden spiral antenna for Terahertz applications [Volume 31, Issue 14, 2024, Pages 1197-1205]
Rezaalipour, M. Doctor Code: A machine learning-based approach to program repair [Volume 31, Issue 2, 2024, Pages 83-102]
Rezaeealam, B. Multi-objective design optimization of a hybrid excitation flux switching permanent magnet motor based on design sensitivity analysis [Volume 31, Issue 14, 2024, Pages 1222-1235]
Rezaee-Alam, F. A new hybrid analytical model based on winding function theory for analysis of unbalanced two-phase induction motors [Volume 31, Issue 2, 2024, Pages 149-160]
Rezaee-Alam, F. Multi-objective design optimization of a hybrid excitation flux switching permanent magnet motor based on design sensitivity analysis [Volume 31, Issue 14, 2024, Pages 1222-1235]
Rezaei, H. Performance improvement of the hybrid switch reluctance motor by notching method [Volume 31, Issue 10, 2024, Pages 790-797]
Rezaei, S. Joint production-planning and distribution optimization of perishable products under a combined shipment structure: A new hybrid policy-based approach [Volume 31, Issue 6, 2024, Pages 481-499]
Rezaei Nezhad, H. Optimized deep networks structure to improve the accuracy of estimator algorithm in deep networks learning [Volume 31, Issue 5, 2024, Pages 417-429]
Rezazadeh, G. Fault-tolerant capability analysis of six-phase induction motor with distributed, concentrated, and pseudo-concentrated windings [Volume 31, Issue 10, 2024, Pages 775-789]
Rezazadeh, H. On numerical solutions of telegraph, viscous, and modified Burgers equations via Bernoulli collocation method [Volume 31, Issue 1, 2024, Pages 43-54]
Riaz, M. Cubic bipolar fuzzy aggregation operator with priority degree with multi-criteria decision-making [Volume 31, Issue 5, 2024, Pages 388-416]

S

Sabagh Molahosseini, A. Optimized deep networks structure to improve the accuracy of estimator algorithm in deep networks learning [Volume 31, Issue 5, 2024, Pages 417-429]
Sadedel, M. Iranian license plate recognition using a reliable deep learning approach [Volume 31, Issue 14, 2024, Pages 1105-1121]
Sadeghnejad, S. Hyperelastic and viscoelastic modeling of the ovine intervertebral disc tissue [Volume 31, Issue 4, 2024, Pages 295-309]
Saeed, M. H. Investigation of structural, photo-luminescence and self-cleaning properties of thin layers of GO-ZnO and GO, GO-Ag and composite bilayer of GO-ZnO/GO-Ag prepared by spray pyrolysis method [Volume 31, Issue 12, 2024, Pages 958-966]
Saeed, N. Percentile bootstrap control chart for monitoring process variability under non-normal processes [Volume 31, Issue 15, 2024, Pages 1282-1292]
Sakr, I. M. Improvement of the axial-jet-pump performance using modified mixing chamber configuration and inlet swirling flow [Volume 31, Issue 1, 2024, Pages 26-42]
Salmasnia, A. An integrated model for optimal selection of quality, maintenance, and production parameters with autocorrelated data [Volume 31, Issue 3, 2024, Pages 206-227]
Salmasnia, A. Joint optimization of pricing, inventory control, and preservation technology investment under both quality and quantity deteriorating [Volume 31, Issue 3, 2024, Pages 269-281]
Samanta, S. K. Analysis of Stationary Fluid Queue Driven by State-Dependent Birth-Death Process Subject to Catastrophes [Volume 31, Issue 14, 2024, Pages 1149-1158]
Samimi, M. H. Investigation of transformer vibration characteristics using the finite element method [Volume 31, Issue 5, 2024, Pages 441-457]
Sankar, M. Effect of variable heat source and gravity variance on the convection in porous layer with temperature dependent viscosity [Volume 31, Issue 13, 2024, Pages 1056-1062]
Santhanakumar, M. Cooling performance of turning M2 steel by using copper nano fluids [Volume 31, Issue 13, 2024, Pages 1043-1055]
Saraeian, S. Process mining-based business process management architecture: A case study in smart factories [Volume 31, Issue 14, 2024, Pages 1122-1142]
Sarafrazi, A. Uncertain model of industrial clusters for the optimal arrangement of co-operation networks under sustainable and dynamic conditions [Volume 31, Issue 3, 2024, Pages 228-251]
Sarfraz, M. Energy optimization of water-based hybrid nanomaterials over a wedge-shaped channel [Volume 31, Issue 1, 2024, Pages 71-82]
Sarker, B. Discriminant analysis-based parametric study of an electrical discharge machining process [Volume 31, Issue 3, 2024, Pages 186-205]
Seidi, H. Minimum stiffness and optimal position of intermediate elastic support to maximize the fundamental frequency of a vibrating Timoshenko beam [Volume 31, Issue 13, 2024, Pages 967-979]
Shah, S. Study of peristaltic transport of a dusty second-grade fluid in a curved configuration [Volume 31, Issue 1, 2024, Pages 15-25]
Shahbazi, M. An intuitionistic fuzzy multi-class approach to risk assessment for sustainable BOT highway construction projects: A case study [Volume 31, Issue 7, 2024, Pages 569-587]
Shahdi, S. O. COVID-19 diagnosis: ULGFBP-ResNet51 approach on the CT and the chest X-ray images classiffcation [Volume 31, Issue 14, 2024, Pages 1091-1104]
Shamsaee Zafarghandi, M. Electrodeposition of hierarchically structured superhydrophobic Ni-PTFE composite coating with remarkable corrosion resistance, chemical and mechanical stability [Volume 31, Issue 12, 2024, Pages 907-919]
Shams Esfand Abadi, V. Hyperelastic and viscoelastic modeling of the ovine intervertebral disc tissue [Volume 31, Issue 4, 2024, Pages 295-309]
Shayesteh, H. An effective dispersive liquid-liquid microextraction method for pharmaceutical extraction: Optimization via central composite design [Volume 31, Issue 9, 2024, Pages 693-703]
Sheha, A.A.A. Improvement of the axial-jet-pump performance using modified mixing chamber configuration and inlet swirling flow [Volume 31, Issue 1, 2024, Pages 26-42]
Sheibanirad, A. A self-adaptive approach to job scheduling in cloud computing environments [Volume 31, Issue 5, 2024, Pages 373-387]
Sheyda, M. A novel approach for vehicle identification based on image registration and deep learning [Volume 31, Issue 5, 2024, Pages 431-440]
Shirazian, Sh. A stochastic-fuzzy multi-objective model for the last-mile delivery problem using drones and ground vehicles, a case study [Volume 31, Issue 11, 2024, Pages 847-865]
Silas Kumar, M.D. Python programming predictions of thermal behavioral aspects of orange peel and coconut-coir reinforced epoxy composites [Volume 31, Issue 8, 2024, Pages 659-666]
Singh, R. On the solutal and thermal Marangoni convection arising in the self-rewetting fluid flow under hydromagnetic consideration [Volume 31, Issue 13, 2024, Pages 1007-1019]
Sivarao, S. Python programming predictions of thermal behavioral aspects of orange peel and coconut-coir reinforced epoxy composites [Volume 31, Issue 8, 2024, Pages 659-666]
Suresh, R. Mechanical behavior and sliding wear assessment of Al2024/TiC metal matrix composite using Taguchi and spotted hyena optimization [Volume 31, Issue 13, 2024, Pages 1063-1076]
Suvalka, R. EBG and SRR loaded triple band notched UWB antenna [Volume 31, Issue 5, 2024, Pages 458-468]

T

Taghian, M. Numerical simulation of water drop deformation under electrical fields in oil fields [Volume 31, Issue 1, 2024, Pages 55-70]
Tahami, F. Fault-tolerant capability analysis of six-phase induction motor with distributed, concentrated, and pseudo-concentrated windings [Volume 31, Issue 10, 2024, Pages 775-789]
Taheri, H. Performance improvement of the hybrid switch reluctance motor by notching method [Volume 31, Issue 10, 2024, Pages 790-797]
Tamizharasi, P. Peristaltic motion of non-Newtonian fluid under the influence of inclined magnetic field, porous medium, and chemical reaction [Volume 31, Issue 8, 2024, Pages 632-645]
Tariq, H. Study of peristaltic transport of a dusty second-grade fluid in a curved configuration [Volume 31, Issue 1, 2024, Pages 15-25]
Tavakkoli-Moghaddam, R. An integrated model for optimal selection of quality, maintenance, and production parameters with autocorrelated data [Volume 31, Issue 3, 2024, Pages 206-227]
Tavakkoli-Moghaddam, R. Uncertain model of industrial clusters for the optimal arrangement of co-operation networks under sustainable and dynamic conditions [Volume 31, Issue 3, 2024, Pages 228-251]
Tekieh, R. A MapReduce-based big data clustering using swarm-inspired meta-heuristic algorithms [Volume 31, Issue 10, 2024, Pages 737-749]
Torabi, S .A. A resilient supply chain network for an online retailer: A three-phase robust framework and a case study [Volume 31, Issue 15, 2024, Pages 1237-1255]
Tran, D.-H. Robust forensic-based investigation algorithm for resource leveling in multiple projects [Volume 31, Issue 7, 2024, Pages 603-618]
Tripathi, R. On the solutal and thermal Marangoni convection arising in the self-rewetting fluid flow under hydromagnetic consideration [Volume 31, Issue 13, 2024, Pages 1007-1019]

V

Vaezi, M. J. PEBA/Na-X multilayer hybrid membrane for CO2 separation: Influence of Na-X zeolite layer synthesis condition [Volume 31, Issue 9, 2024, Pages 704-717]
Vahdani, B. Multi-depot home health care routing and scheduling problem with multimodal transportation: Mathematical model and solution methods [Volume 31, Issue 11, 2024, Pages 825-846]
Vahidi-Asl, M. Doctor Code: A machine learning-based approach to program repair [Volume 31, Issue 2, 2024, Pages 83-102]
Valizadeh Harzand, F. Effects of different designs of pressure vessels on efficiency and energy consumption of reverse osmosis systems [Volume 31, Issue 9, 2024, Pages 718-726]
Vijayaragavan, R. Peristaltic motion of non-Newtonian fluid under the influence of inclined magnetic field, porous medium, and chemical reaction [Volume 31, Issue 8, 2024, Pages 632-645]
Vossughi, Gh. Conceptual modeling and parametric study of the nonlinear dynamics of the floating wind turbine in the presence of primary and internal resonance [Volume 31, Issue 4, 2024, Pages 330-345]

W

Wang, J. Risk governance mechanism of food safety based on product reputation [Volume 31, Issue 3, 2024, Pages 175-185]
Wang, J. Corrigendum to "An improved MULTIMOORA method for multi-valued neutrosophic multi-criteria group decision-making based on prospect theory" [Scientia Iranica 30(5) (2023) 1822-1840] [Volume 31, Issue 3, 2024, Pages 282-282]
Wang, J.-Q. Corrigendum to "An improved MULTIMOORA method for multi-valued neutrosophic multi-criteria group decision-making based on prospect theory" [Scientia Iranica 30(5) (2023) 1822-1840] [Volume 31, Issue 3, 2024, Pages 282-282]
Wu, W. Application of a novel quadratic polynomial discrete grey model to forecast energy consumption of China [Volume 31, Issue 6, 2024, Pages 469-480]

X

Xiao, F. Corrigendum to "An improved MULTIMOORA method for multi-valued neutrosophic multi-criteria group decision-making based on prospect theory" [Scientia Iranica 30(5) (2023) 1822-1840] [Volume 31, Issue 3, 2024, Pages 282-282]

Y

Yadav, Ajay K. S. EBG and SRR loaded triple band notched UWB antenna [Volume 31, Issue 5, 2024, Pages 458-468]
Yaghoubi, S. Numerical simulation of water drop deformation under electrical fields in oil fields [Volume 31, Issue 1, 2024, Pages 55-70]
Yaghoubi, S. Effects of different designs of pressure vessels on efficiency and energy consumption of reverse osmosis systems [Volume 31, Issue 9, 2024, Pages 718-726]
Yazdani, M. Multi-depot home health care routing and scheduling problem with multimodal transportation: Mathematical model and solution methods [Volume 31, Issue 11, 2024, Pages 825-846]
Yellamma, Yellamma Effect of variable heat source and gravity variance on the convection in porous layer with temperature dependent viscosity [Volume 31, Issue 13, 2024, Pages 1056-1062]
Yolcan, O. O. Thermal Comfort and Energy Analysis in Ceramic Tile [Volume 31, Issue 13, 2024, Pages 993-1006]
Yousefikhoshbakht, M. New decision-making methods for ranking of non-dominated points for multi-objective optimization problems [Volume 31, Issue 3, 2024, Pages 252-268]

Z

Zabihi-Samani, M. The effect of dolphin echolocation-fuzzy logic controller in semi-active control of structural systems using endurance time method [Volume 31, Issue 7, 2024, Pages 511-555]
Zarfam, P. The effect of dolphin echolocation-fuzzy logic controller in semi-active control of structural systems using endurance time method [Volume 31, Issue 7, 2024, Pages 511-555]
Zarrabi-Zadeh, H. On the maximum triangle problem [Volume 31, Issue 14, 2024, Pages 1143-1148]
Zhang, J. J. Monitoring coefficient of variation using variable sampling interval double exponentially weighted moving average charts [Volume 31, Issue 15, 2024, Pages 1293-1312]
Zhang, S. Y. Monitoring coefficient of variation using variable sampling interval double exponentially weighted moving average charts [Volume 31, Issue 15, 2024, Pages 1293-1312]
Zhang, Y. Monitoring coefficient of variation using variable sampling interval double exponentially weighted moving average charts [Volume 31, Issue 15, 2024, Pages 1293-1312]
Zhang, Y. Application of a novel quadratic polynomial discrete grey model to forecast energy consumption of China [Volume 31, Issue 6, 2024, Pages 469-480]
Zhou, P. P. Monitoring coefficient of variation using variable sampling interval double exponentially weighted moving average charts [Volume 31, Issue 15, 2024, Pages 1293-1312]
Zolghardi, M. R. Performance improvement of a system-level harmonic using a harmonic power flow controller [Volume 31, Issue 2, 2024, Pages 161-173]