Volume & Issue: Articles in Press
1. Three-dimensional repositioning of jaw in the orthognathic surgery using the binocular stereo vision

Articles in Press, Accepted Manuscript, Available Online from 30 August 2017

Ismail Taha COMLEKCILER; Salih GUNES; Celal IRGIN

2. Dynamic response of concrete funicular shells with rectangular base under impulse loads

Articles in Press, Accepted Manuscript, Available Online from 04 July 2018

Hadi Sabermahany; Abolhassan Vafai; Masood Mofid

3. Experimental study of the effect of water to cement ratio on mechanical properties and durability of nano-silica concretes with polypropylene fibers

Articles in Press, Accepted Manuscript, Available Online from 29 July 2018

Adel Rahmati; Kamal Rahmani; Saber Piroti

4. Prediction of Subgrade Reaction Modulus of Clayey Soils using Group Method of Data Handling

Articles in Press, Accepted Manuscript, Available Online from 08 August 2018

Seyed Abolhasan Naeini; Reza Ziaie Moayed; Afshin Kordnaeij; Hossein Mola-Abasi

5. Prediction of meteorological and hydrological phenomena by different climatic scenarios in the Karkheh watershed (south west of Iran)

Articles in Press, Accepted Manuscript, Available Online from 08 August 2018

Arash Adib; Seyedeh Batool Mirsalari; Seyed Mohammad Ashrafi

6. Volume Change Behavior of Stabilized Expansive Clay with Lignosulfonate

Articles in Press, Accepted Manuscript, Available Online from 08 August 2018

Reza Noorzad; Bahram Ta'negonbadi

7. A Novel Similar Character Discrimination Method for Online Handwritten Urdu Character Recognition in Half Forms

Articles in Press, Accepted Manuscript, Available Online from 11 August 2018

Quara tul Ain Safdar; Kamran Ullah Khan; Liangrui Peng

8. Evaluation of the response modification factor of RC structures constructed with Bubble Deck system

Articles in Press, Accepted Manuscript, Available Online from 07 October 2018

Seyed Shaker Hashemi; Kabir Sadeghi; Mohammad Vaghefi; Seyed Alireza Siadat

9. QUASI-OPPOSITIONAL SYMBIOTIC ORGANISMS SEARCH ALGORITHM FOR DIFFERENT ECONOMIC LOAD DISPATCH PROBLEMS

Articles in Press, Accepted Manuscript, Available Online from 15 October 2018

Diptanu Das; Aniruddha Bhattacharya; Rup Narayan Ray

10. Suitability of brick kiln waste as a stabilizer to clayey soils

Articles in Press, Accepted Manuscript, Available Online from 22 October 2018

Abdullah Saand; Muhammad Auchar Zardari; Manthar Ali Keerio; Sabir Hussain Shaikh; Daddan Khan Bangwar

11. Uncertainty Quantification in Seismic Collapse Assessment of Iranian Code-Conforming RC Buildings

Articles in Press, Accepted Manuscript, Available Online from 22 October 2018

Mohammad Amin Hariri-Ardebili; Seyyed Abbas Hoseini; Mohsen Ghaemian

12. A New Approach to Improve Durability of Rice Husk Ash Blended Concrete with Re-Dispersible Polymer Powder

Articles in Press, Accepted Manuscript, Available Online from 22 October 2018

Daddan Khan Bangwar; Abdullah Saand; Manthar Ali Keerio; Muhammad Auchar Zardari

13. Investigating the behavior factor of coupled concrete shear walls with steel coupling beam

Articles in Press, Accepted Manuscript, Available Online from 28 October 2018

Mohhamad hasan Daneshvar; Abbas Karamodin

14. Utilizing new spherical Hankel shape functions to reformulate the deflection, free vibration, and buckling analysis of Mindlin plates based on finite element method

Articles in Press, Accepted Manuscript, Available Online from 28 October 2018

Majid Mohammadi Nia; Saeed Shojaee; Saleh Hamzehei-Javaran

15. Application of Endurance Time Method in Seismic Analysis of Bridges

Articles in Press, Accepted Manuscript, Available Online from 28 October 2018

Esmaeil Ghaffari; H. E. Estekanchi; A. Vafai

17. Damage detection in frame structures using noisy accelerometers and Damage Load Vectors (DLV)

Articles in Press, Accepted Manuscript, Available Online from 04 November 2018

Iraj Toloue; Mohd Shahir Liew; Indra Sati Hamonangan Harahap; Hsu Eik Lee

18. Optimal Objective Function in Simulating Endurance Time Excitations

Articles in Press, Accepted Manuscript, Available Online from 11 November 2018

Mohammadreza Mashayekhi; H. E. Estekanchi; A. Vafai

19. Economic evaluation of energy-efficient engineering systems

Articles in Press, Accepted Manuscript, Available Online from 11 November 2018

Ivan A. Kapitonov

20. Technical and Economic Considerations for using of Permanent Magnet Brushless Motors in Evaporative Water Coolers

Articles in Press, Accepted Manuscript, Available Online from 19 November 2018

Abolfazl Halvaei Niasar; Hossein NikKhah; Fariborz EshratAbadi

21. Gene expression programming models for liquefaction-induced lateral spreading

Articles in Press, Accepted Manuscript, Available Online from 02 December 2018

Amin Keshavarz; Hojjat Tofighi

22. Cracking effects on chloride diffusion and corrosion initiation in RC structures via finite element simulation

Articles in Press, Accepted Manuscript, Available Online from 02 December 2018

Mohammad Ghanooni-bagha; M. A. Shayanfar; Mohammad Hosein Farnia

23. OPTICAL SOLITONS IN BIREFRINGENT FIBERS WITH FOUR{WAVE MIXING BY EXTENDED TRIAL EQUATION METHOD

Articles in Press, Accepted Manuscript, Available Online from 04 December 2018

Anjan Biswas; Mehmet Ekici; Abdullah Sonmezoglu; Qin Zhou; Seithuti P. Moshokoa; Milivoj Belic

24. Performance of EBFs equipped with an innovative shape memory alloy damper

Articles in Press, Accepted Manuscript, Available Online from 04 December 2018

Nadia Mirzai; Reza Attarnejad

25. Seismic evaluation of special steel moment frames undergoing near-field earthquakes with forward directivity by considering soil-structure interaction effects

Articles in Press, Accepted Manuscript, Available Online from 04 December 2018

Shahrokh Shahbazi; Mohsen Khatibinia; Iman mansouri; Jong Wan Hu

26. Government Credit Risk Assessment of Non-profit PPP Projects in China based on the Model of IVHFSs-IFAHP

Articles in Press, Accepted Manuscript, Available Online from 04 December 2018

Jia Chen; Daming Wang

27. Artificial accelerograms to estimate damage of dams by using failure criteria

Articles in Press, Accepted Manuscript, Available Online from 04 December 2018

Enrico Zacchei; José Luis Molina

28. Investigating the Exergy of Flow and Three Dimensional Flow Study within the Vortex Tube Device Using Computational Fluid Dynamics (CFD)

Articles in Press, Accepted Manuscript, Available Online from 08 December 2018

Nader Pourmahmoud; Omid Moutabi

29. A Mathematical Model for Competitive Location Problem with Product Selection

Articles in Press, Accepted Manuscript, Available Online from 08 December 2018

Seyed Jafar Sadjadi; Milad Gorji Ashtiani; Ahmad Makui; Reza Ramezanian

30. A bi-objective hierarchical hub location model with facility failure

Articles in Press, Accepted Manuscript, Available Online from 10 December 2018

Mohsen Babashahi; Kamran Shahanaghi; Mohammad Reza Gholamian; Arash Yavari

31. Evaluation of UV aging behaviors of polyphosphoric acid (PPA) modified asphalt and its asphalt mixture

Articles in Press, Accepted Manuscript, Available Online from 18 December 2018

Shengjie Liu; Yinshan Xu; Shengbo Zhou

32. Coordination of traditional and online group-buying channels considering website promotion effort

Articles in Press, Accepted Manuscript, Available Online from 22 December 2018

Yifan Wu; Danning Li; Tian Li

33. Dynamic virtual cell formation considering new product development

Articles in Press, Accepted Manuscript, Available Online from 22 December 2018

Ahmadreza Rostami; Mohammad Mahdi Paydar; Ebrahim Asadi-Gangraj

34. A Novel Inductive Tactile Probe Design for Lump Detection in Soft Tissue Phantoms

Articles in Press, Accepted Manuscript, Available Online from 22 December 2018

Mustafa Zahid YILDIZ; Hamid ASADI DERESHGI; Ali Furkan KAMANLI

35. Near free-edge stresses in FRP-to-concrete bonded joint due to mechanical and thermal loads

Articles in Press, Accepted Manuscript, Available Online from 26 December 2018

H. Samadvand; Mehdi Dehestani

36. A holistic framework for lot sizing problem in fast-moving perishable products

Articles in Press, Accepted Manuscript, Available Online from 31 December 2018

Amit Kumar Sinha; Ankush Anand

37. An effective solution approach for multi-objective fractional fixed charge problem with fuzzy parameters

Articles in Press, Accepted Manuscript, Available Online from 31 December 2018

Ali Mahmoodirad; Sadegh Niroomand; Farhad Hosseinzadeh Lotfi

38. Enhancing the efficiency of the ratio-type estimators of population variance with a blend of information on robust location measures

Articles in Press, Accepted Manuscript, Available Online from 08 January 2019

Farah Naz; Muhammad Abid; Tahir Nawaz; Tianxiao Pang

39. Optimal Sizing of Hybrid WT/PV/Diesel Generator/Battery System using MINLP Method for a Region in Kerman

Articles in Press, Accepted Manuscript, Available Online from 08 January 2019

Hossein Torkaman; S. Khosrogorji; H. Ghari

41. Instantaneous Thrust Control of the Linear Switched Reluctance Motors with Segmental Translator

Articles in Press, Accepted Manuscript, Available Online from 08 January 2019

Babak Ganji; Ali Zare

42. Continuous Slip Surface Method for Stability Analysis of Heterogeneous Vertical Trenches

Articles in Press, Accepted Manuscript, Available Online from 08 January 2019

Reza Jamshidi Chenari; Hassan Kamyab; Ardavan Izadi

43. Improving facility management of public hospitals in Iran using building information modeling

Articles in Press, Accepted Manuscript, Available Online from 12 January 2019

Amin Alvanchi; Abolfazl Seyrfar

44. Influence of Two Different Producers in a Competitive Location Problem

Articles in Press, Accepted Manuscript, Available Online from 12 January 2019

babak Yousefi yegane; Isa Nakhai Kamalabadi; Hiwa Farughi

45. Developing a deformable model of liver tumor during breathing to improve targeting accuracy in image-guided therapy using finite element simulation

Articles in Press, Accepted Manuscript, Available Online from 12 January 2019

Mahdi Moghimi Zand; M Tehrani; Z Matin

46. Collapse of reticulated domes, a case study of Talakan oil tank

Articles in Press, Accepted Manuscript, Available Online from 22 January 2019

A. Heidari; H. Karimi; I. Mahmoudzadeh Kani

47. SUSTAINABLE USE OF STABILIZED FLOOD MUD AS SUBGRADE SOIL FOR LOW VOLUME TRAFFIC ROADS

Articles in Press, Accepted Manuscript, Available Online from 22 January 2019

AHMAD SAFUAN A RASHID; Nurul Ain Ibrahim; Nor Zurairahetty Mohd Yunus; Nima Latifi; Suksun Horpibulsuk

48. Experimental and Numerical Comparison of Flow and scour Patterns around a Single and Triple Bridge Piers Located at a sharp 180 degrees Bend

Articles in Press, Accepted Manuscript, Available Online from 22 January 2019

MORTEZA ASADOLLAHI; Mohammad Vaghefi; Mohammad Javad Tabibnejad Motlagh

49. Collapse assessment of Protected Steel Moment Frame under Post-earthquake Fire

Articles in Press, Accepted Manuscript, Available Online from 22 January 2019

Mohsen Gerami; Pouria Pouria Mirzaei

50. NUMERICAL MODELING OF A NEW REINFORCED MASONRY SYSTEM SUBJECTED TO IN-PLAN CYCLIC LOADING

Articles in Press, Accepted Manuscript, Available Online from 23 January 2019

bahman shakarami; Mohammad Z. Kabir; razieh sistaninejad

51. Laboratory investigation of geotextile position on CBR of clayey sand soil under freeze-thaw cycle

Articles in Press, Accepted Manuscript, Available Online from 23 January 2019

Behnam Shams; Alireza Ardakani; Mahya Roustaei

52. An exact solution to the problems of flexo-poro-elastic structures rested on elastic beds acted upon by moving loads

Articles in Press, Accepted Manuscript, Available Online from 26 January 2019

Ali Nikkhoo; Reza Tafakor; Massood Mofid

53. Product substitution with customer segmentation under panic buying behavior

Articles in Press, Accepted Manuscript, Available Online from 27 January 2019

Yu-Chung Tsao; Praveen Vijaya Raj Pushpa Raj

54. A framework for Earthquake Emergency Response in Iran

Articles in Press, Accepted Manuscript, Available Online from 27 January 2019

Mehdi Najafi; Sassan Eshghi; Kourosh Eshghi

55. Vibrational Analysis of Fullerene Hydrides Using AIREBO Potential

Articles in Press, Accepted Manuscript, Available Online from 27 January 2019

Ali Golzari; H. Nejat Pishkenari

56. On Accuracy Function and Distance Measures of Interval-valued Pythagorean Fuzzy Sets with Application in Decision Making

Articles in Press, Accepted Manuscript, Available Online from 27 January 2019

Tanuj Kumar; Rakesh Bajaj; Mohd Dilshad Ansari

57. Spaser Based on Graphene Tube

Articles in Press, Accepted Manuscript, Available Online from 04 February 2019

Sadreddin Behjati Ardakani; Rahim Faez

58. Fault Detection in Cracked Structure under Moving Load using RNNs based Approach

Articles in Press, Accepted Manuscript, Available Online from 04 February 2019

SHAKTI JENA; Dayal R Parhi

59. ANALYSIS OF SECOND-GRADE FLUID FLOW IN POROUS CHANNEL WITH CATTANEO-CHRISTOV AND GENERALIZED FICK’S THEORIES

Articles in Press, Accepted Manuscript, Available Online from 04 February 2019

Sabir Ali Shehzad; Sami Ullah Khan; Nasir Ali; M. N. Bashir

60. Thermodynamics analysis for high temperature hydrogen production system

Articles in Press, Accepted Manuscript, Available Online from 04 February 2019

S Safari sabet; M Namar; M Sheikholeslami; Ahmad Shafee

61. Influence of Areca Nut Nano Filler on Mechanical and Tribological Properties of Coir Fiber Reinforced Epoxy Based Polymer Composite

Articles in Press, Accepted Manuscript, Available Online from 04 February 2019

Vishwas M; vinyas mahesh; Puneeth K

62. Designing a resource-constrained project scheduling model considering multiple routes for flexible project activities: meta-heuristic algorithms

Articles in Press, Accepted Manuscript, Available Online from 17 February 2019

A. Birjandi; S.Meysam Mousavi; B. Vahdani

63. A novel selective clustering framework for appropriate labeling of the clusters based on K-means algorithm

Articles in Press, Accepted Manuscript, Available Online from 17 February 2019

Fateme Moslehi; Abdorrahman Haeri; Mohammad Reza Gholamian

64. High Accuracy Power Sharing in Parallel Inverters in an Islanded Microgrid Using Modified Sliding Mode Control Approach

Articles in Press, Accepted Manuscript, Available Online from 17 February 2019

Mehrdad Mahmoudian; mohammad amin bian; Mohsen Gitizadeh

65. Supply Chain Reconfiguration for a New Product Development with Risk Management Approach

Articles in Press, Accepted Manuscript, Available Online from 17 February 2019

Maliheh Sabzevari; Seyed Mojtaba Sajadi; Mohammad Hadji Molana

66. Comparison of Adaptive magnetorheological elastomer isolator and elastomeric isolator in Near-Field and Far-Field earthquakes

Articles in Press, Accepted Manuscript, Available Online from 17 February 2019

saeed taghizadeh; Abbas Karamodin

67. Design and Analysis of Solar Photovoltaic fed Z-Source Inverter based Dynamic Voltage Restorer

Articles in Press, Accepted Manuscript, Available Online from 18 February 2019

Miska Prasad; Ashok Kumar Akella; Almoataz Youssef

68. ASYMMETRICAL FUZZY LOGIC CONTROL BASED MPPT ALGORITHM FOR STAND-ALONE PV SYSTEM UNDER PARTIALLY SHADED CONDITIONS

Articles in Press, Accepted Manuscript, Available Online from 18 February 2019

Pallavi Verma; Rachana Garg; Priya Mahajan

69. Predictive heuristics to generate robust and stable schedules in single machine systems under disruptions

Articles in Press, Accepted Manuscript, Available Online from 24 February 2019

Zeinab Abtahi; Rashed Sahraeian; Donya Rahmani

70. Numerical study on the influence of suspended equipments on the ride comfort in high speed railway vehicles

Articles in Press, Accepted Manuscript, Available Online from 24 February 2019

Madalina Dumitriu

71. An experimental study regarding Economic Load Dispatch using Search Group Optimization

Articles in Press, Accepted Manuscript, Available Online from 24 February 2019

Kuntal Bhattacharjee; Nitish Patel

72. Space headway calculation and analysis at turn movement trajectories using hybrid model

Articles in Press, Accepted Manuscript, Available Online from 04 March 2019

Chao Wang; Zhirui Ye; Enhui Chen; Jiaxiao Feng

74. Seismic Behaviour Assessment of Eccentrically Split-X Braced Frames

Articles in Press, Accepted Manuscript, Available Online from 10 March 2019

Nader Fanaie; Ramin Sheykhi

75. Control of Natural Frequency of Beams using Different Pre-tensioning Cable Patterns

Articles in Press, Accepted Manuscript, Available Online from 10 March 2019

Nader Fanaie; Fatemeh Partovi

76. An integrated lot-sizing model with supplier and carrier selection and quantity discounts considering multiple products

Articles in Press, Accepted Manuscript, Available Online from 07 April 2019

Hashem Vahdani; Salman Abrishami; Babak Rezaee

77. Investigating the effects of impact directions to improve head injury index

Articles in Press, Accepted Manuscript, Available Online from 07 April 2019

Javad Afshari; Mohammad Haghpanahi; Reza Kalantarinejad; Abel Rouboa

78. Technology valuation of NTBFs in the field of cleaner production with regard to the investors’ flexibilities and uncertainties in public policy

Articles in Press, Accepted Manuscript, Available Online from 07 April 2019

Komeil Fattahi; Ali Bonyadi Naeini; Seyed Jafar Sadjadi

79. The application of wavelet theory with denoising to estimate the parameters of earthquake

Articles in Press, Accepted Manuscript, Available Online from 09 April 2019

Ali Heidari; Jalil Raeisi; Reza Kamgar

80. Experimental and Numerical Study on Proposed T-Form Semi-Precast Moment-Resisting Concrete Connections

Articles in Press, Accepted Manuscript, Available Online from 09 April 2019

Mijtaba Fathi; Mahdi - parvizi

81. Parametric study from laboratory tests on twin circular footings on geocell-reinforced sand

Articles in Press, Accepted Manuscript, Available Online from 09 April 2019

Pezhman Fazeli Dehkordi; M. Ghazavi; Navid Ganjian; Usama F.A. karim

83. ON NEW FAMILY OF KIES BURR III DISTRIBUTION: Development, Properties, Characterizations, and Application

Articles in Press, Accepted Manuscript, Available Online from 22 April 2019

Fiaz Ahmad Bhatti

84. Bi-objective optimization of non-periodic preventive maintenance strategy by considering time value of money

Articles in Press, Accepted Manuscript, Available Online from 22 April 2019

Ali Salmasnia; ali shahidian; Mesbah Seivandian; Behnam Abdzadeh

85. Pulsed Nd: YAG Laser Dissimilar Welding of Ti/Al3105 Alloys

Articles in Press, Accepted Manuscript, Available Online from 22 April 2019

S.K. Sadrnezhaad; Abeer A. Shehab; Adel K. Mahmoud; M.J. Torkamany; Amir Hossein Kokabi; M. Fakouri Hasanabadi

86. FREIGHT MODAL POLICIES TOWARD A SUSTAINABLE SOCIETY

Articles in Press, Accepted Manuscript, Available Online from 23 April 2019

Amir Samimi; Ehsan Rahimi; Hamidreza Amini; Helia Jamshidi

88. On the Performance of Median Based Tukey and Tukey-EWMA Charts Under Rational Subgrouping

Articles in Press, Accepted Manuscript, Available Online from 01 May 2019

Qurat-Ul-Ain Khaliq; Muhammad Riaz; Irshad Ahmad Arshad; Shahla Gul

89. Experimental evaluation of solar integrated water heater

Articles in Press, Accepted Manuscript, Available Online from 01 May 2019

Dhananjay R Mishra; Hrishi Jain; Nishant Kumar

90. Extended Economic Production Quantity Models with Preventive Maintenance

Articles in Press, Accepted Manuscript, Available Online from 01 May 2019

Hadi Mokhtari; Javad Asadkhani

91. Novel aspects of Soret and Dufour in entropy generation minimization for Williamson fluid flow

Articles in Press, Accepted Manuscript, Available Online from 01 May 2019

Tasawar Hayat; f m; Sumaira Qayyum; Muhammad Ijaz Khan; A A

92. PM10 and CO Dispersion Modeling of Emissions from the Four Thermal Power Plants in Mashhad-Iran

Articles in Press, Accepted Manuscript, Available Online from 01 May 2019

Mohammad Amir Moharreri; Foroozan Arkian; Kamran Lari; Gholam Reza Salehi

93. Chaotic Vibrating Particles System for Resource-Constrained Project Scheduling Problem

Articles in Press, Accepted Manuscript, Available Online from 04 May 2019

A. Kaveh; Yasin Vazirinia

94. Weight determination and ranking priority in interval group MCDM

Articles in Press, Accepted Manuscript, Available Online from 05 May 2019

S. Saffarzadeh; A. Hadi-Vencheh; A. Jamshidi

95. A game theoretic approach to coordinate pricing, ordering and co-op advertising in supply chains with stochastic demand

Articles in Press, Accepted Manuscript, Available Online from 05 May 2019

Hamid Ghashghaei; Marzieh Mozafari

96. Risk-based Switch Placement in Electric Distribution Network in Presence of Performance Based Regulation

Articles in Press, Accepted Manuscript, Available Online from 07 May 2019

Mohsen Simab; Amin Moradkhani

97. Estimation of 80 kW Solar Generating Station in Kabudrahang Iran: A Comparative Study

Articles in Press, Accepted Manuscript, Available Online from 07 May 2019

Hossein Torkaman; Reza Kazemi; Ali Keyhani

98. Effects of Seismic Pounding between Adjacent Structures Considering Structure-Soil-Structure Interaction

Articles in Press, Accepted Manuscript, Available Online from 07 May 2019

Mehdi Kermani; Mohammad Mehdi Saadatpour; Farhad Behnamfar; Mehdi Ghandil

99. A New Active Snubber Cell for Soft Switched Power Factor Correction Boost Converters

Articles in Press, Accepted Manuscript, Available Online from 13 May 2019

Naim Suleyman Ting; Yakup Sahin; Halil Yetgin

100. Optimization of Manipulator Drive Mechanisms in Hydraulic Excavators on the Basis of the Tribological Criterion

Articles in Press, Accepted Manuscript, Available Online from 21 May 2019

Jovan Pavlović; Dragoslav Janošević; Vesna Jovanović

101. An e-commerce facility location problem under uncertainty

Articles in Press, Accepted Manuscript, Available Online from 21 May 2019

Jiayu Shen

102. Numerical Investigation of the Mechanical Performance of NiTi stent for application in Thoracic Aortic Aneurysm (TAA)

Articles in Press, Accepted Manuscript, Available Online from 21 May 2019

Fardin Nematzadeh; Hossein Mostaan

103. A hybrid Approach in Metaheuristics for a Cross-dock Scheduling Considering Time Windows and Deadline for Trucks Departure

Articles in Press, Accepted Manuscript, Available Online from 21 May 2019

Amir Golshahi-Roudbaneh; Mostafa Hajiaghaei-Keshteli; Mohammad Mahdi Paydar

104. Efficiency Evaluation of a Three-Stage Leader-Follower Model by the Data Envelopment Analysis with Double-Frontier Viewpoint

Articles in Press, Accepted Manuscript, Available Online from 21 May 2019

ehsan vaezi; Seyyed Esmaeil Najafi; Seyyed Mohamad Hajimolana; Farhad Hosseinzadeh Lotfi; Mahnaz Ahadzadeh Namin

105. Free vibration response of functionally graded carbon nanotubes double curved shell and panel with piezoelectric layers in a thermal environment

Articles in Press, Accepted Manuscript, Available Online from 28 May 2019

siros khorshidi; Saeed Saber-Samandari; Manouchehr Salehi

106. Investigating the effect of learning in set-up cost for imperfect production systems by utilizing two-way inspection plan for rework under screening constraints

Articles in Press, Accepted Manuscript, Available Online from 28 May 2019

Aakanksha Kishore; Prerna Gautam; Aditi Khanna; Chandra K Jaggi

107. Phase II Monitoring of Generalized Linear Profiles Under Different Types of Changes

Articles in Press, Accepted Manuscript, Available Online from 03 June 2019

Sahand Hajifar; Hashem Mahlooji

108. Inverse Design of a Centrifugal Pump on the Meridional Plane Using Ball-Spine Algorithm

Articles in Press, Accepted Manuscript, Available Online from 03 June 2019

Hadi Fallah Ardeshir; Biyuk Ehghaghi; Mahdi Nili-Ahmadabadi

109. Controlling the deflection of long beams using different patterns of pre-tensioning cables

Articles in Press, Accepted Manuscript, Available Online from 09 June 2019

Nader Fanaie; Fatemeh Partovi; Shervin Safaei Faegh

110. Investigation of interaction between quartz nanostructures and human cell lines for tissue engineering

Articles in Press, Accepted Manuscript, Available Online from 17 June 2019

Amir Shamloo; Maryam Alsadat Rad; M.T. Ahmadian; Leyla Amirifar

111. A novel grey object matrix incidence clustering model for panel data and its application

Articles in Press, Accepted Manuscript, Available Online from 18 June 2019

Yong Liu; Junliang Du; Jiao Li

112. Analytical Model of Recirculation Influence on Premixed Combustion of Lycopodium Dust Particle: Studying Thermal Resistance and Random Distribution of particles

Articles in Press, Accepted Manuscript, Available Online from 18 June 2019

Mehdi Bidabadi; Mohammadali Harati; Hesam Moghadasi

113. Adaptive Radar Signal Detection in Autoregressive Interference using Kalman-based Filters

Articles in Press, Accepted Manuscript, Available Online from 18 June 2019

Mehdi Dorostgan; Mohammad Reza Taban

114. On use of Ranked Set Sampling for estimating Super-population Total: Gamma Population Model

Articles in Press, Accepted Manuscript, Available Online from 18 June 2019

Shakeel Ahmed; Javid Shabbir

115. 0.3V Tunable OTA and Gm-C Filter in 0.13µm CMOS

Articles in Press, Accepted Manuscript, Available Online from 26 June 2019

Farzan Rezaei

116. Experimental Evaluation of Shape Factor of Axis Symmetric Sunken Structures

Articles in Press, Accepted Manuscript, Available Online from 26 June 2019

Dhananjay R Mishra

117. DNA Sequencing Based On Physical Properties at Single Nucleotide Resolution

Articles in Press, Accepted Manuscript, Available Online from 26 June 2019

Hossein Nejat Pishkenari; Farhad Ebadi Jalal

118. Pricing in Two Competing Supply Chains Based on Market Power and Market Size under Centralized and Decentralized Structures

Articles in Press, Accepted Manuscript, Available Online from 26 June 2019

Narges Khanlarzade; seyed hessamedin zegordi; Isa Nakhai Kamalabadi

119. Eigen Spherical Fuzzy Set and its Application in Decision Making Problem

Articles in Press, Accepted Manuscript, Available Online from 26 June 2019

Abhishek Guleria; Rakesh Kumar Bajaj

120. T-spherical Fuzzy Soft Sets and its Aggregation Operators with Application in Decision Making

Articles in Press, Accepted Manuscript, Available Online from 26 June 2019

Abhishek Guleria; Rakesh Kumar Bajaj

121. An Evaluation of Inventory System via Evidence Theory for Deteriorating Items under Uncertain Condition and Advanced Payment

Articles in Press, Accepted Manuscript, Available Online from 26 June 2019

Motahareh Soleimani Amiri; A. Mirzazadeh; Mir Mahdi Seyed Esfahani; Shiva S. Ghasemi

122. Performance Improvement of AC-DC Power Converters under Unbalanced Conditions

Articles in Press, Accepted Manuscript, Available Online from 26 June 2019

Seyed Fariborz Zarei; Mohammad Amin Ghasemi; Hossein Mokhtari; Frede Blaabjerg

123. A fuzzy solution approach for supplier selection and order allocation in green supply chain considering location-routing problem

Articles in Press, Accepted Manuscript, Available Online from 02 July 2019

Zahra Ebrahim Qazvini; Alireza Haji; Hassan Mina

124. Numerical investigation of the effect of viscosity on bubble dynamics in a narrow channel

Articles in Press, Accepted Manuscript, Available Online from 02 July 2019

Mohammad T Shervani-Tabar; Amir Soroureddin; habib aminfar

125. A Real-Time Exhaustive Search Algorithm‎ For Weapon-Target Assignment (WTA) Problem‎

Articles in Press, Accepted Manuscript, Available Online from 07 July 2019

Amirreza Kosari; Naeem Feghhi; Mohmmad Ali Amiri Atashgah

126. Computational optimization of a UFAD system using large eddy simulation

Articles in Press, Accepted Manuscript, Available Online from 07 July 2019

Rahman Rahmaninia; Ehsan Amani; Abbas Abbassi

127. The effects of hygro-thermal loading on the two-dimensional response of a functionally graded piezomagnetic cylinder under asymmetric loads

Articles in Press, Accepted Manuscript, Available Online from 14 July 2019

Mehdi Gharibavi; YI Jian Jun

128. An analysis on the effect of temperature on the morphology of egg shell CaO catalyst: Caytalyst production for biodiesel preparation

Articles in Press, Accepted Manuscript, Available Online from 14 July 2019

THOKCHOM SUBHASCHANDRA SINGH; Tikendra Nath Verma

129. Series solution of slip flow of Al2O3 and Fe3O4 nanoparticles in a horizontal channel with porous medium by using least square and Galerkin methods

Articles in Press, Accepted Manuscript, Available Online from 14 July 2019

Jafar Hasnain; Z. Abbas; Muhammad Aqeel; Abuzar Ghaffari; Irfan Mustafa

130. Effect of Welding Parameters on Dissimilar Pulsed Laser Joint between Nickel-Based Alloy Hastelloy X and Austenitic Stainless Steel AISI 304L

Articles in Press, Accepted Manuscript, Available Online from 15 July 2019

Hamed Halimi; farid vakili; Ebrahim safari

131. Low Power 10-Bit Flash ADC with Divide and Collate Subranging Conversion Scheme

Articles in Press, Accepted Manuscript, Available Online from 16 July 2019

Farhana Begum; Sandeep Mishra; Anup Dandapat

132. A new decision approach for the sustainable transport investment selection based on the generalized entropy and knowledge measure under an interval-valued Pythagorean fuzzy environment

Articles in Press, Accepted Manuscript, Available Online from 16 July 2019

Mahnaz Aghamohagheghi; Seyed Mehdi Hashemi; Reza Tavakkoli-Moghaddam

133. Integration of Machine Learning Techniques and Control Charts for Multivariate Processes

Articles in Press, Accepted Manuscript, Available Online from 16 July 2019

Deniz Demircioglu Diren; Semra Boran; İbrahim Cil

134. Applying a change-point control chart based on likelihood ratio to supply chain network monitoring

Articles in Press, Accepted Manuscript, Available Online from 22 July 2019

Jianlan Zhong; Xuelong Hu; Yaqing Yang; Yiliu Tu

135. A case study on the coordination scheduling for integrated production and distribution

Articles in Press, Accepted Manuscript, Available Online from 22 July 2019

Yang Jiang; Xiaoye Zhou

136. Integrated supply chain decisions with credit-linked demand-A Stackelberg approach

Articles in Press, Accepted Manuscript, Available Online from 22 July 2019

Chong Zhang; Mingchuan You; Guanghua Han

137. A Robust Model for Daily Operation of Grid-connected Microgrids During Normal Conditions

Articles in Press, Accepted Manuscript, Available Online from 22 July 2019

Hossein Ranjbar; Amir Safdarian

138. A mathematical model for an integrated airline fleet assignment and crew scheduling problem solved by vibration damping optimization

Articles in Press, Accepted Manuscript, Available Online from 22 July 2019

Alireza Rashidi Komijan; Reza Tavakkoli-Moghaddam; Seyed Ali Dalil

139. Optimal Winding Selection for Wound-Rotor Resolvers

Articles in Press, Accepted Manuscript, Available Online from 22 July 2019

Mohammad Mohammad-Yari; M. Safari; R. Alipour-Sarabi; Z. Nasiri-Gheidari; F. Tootoonchian

140. A Novel Transverse Flux Permanent Magnet Generator for Small-Scale Direct Drive Wind Turbine Application: Design and Analysis

Articles in Press, Accepted Manuscript, Available Online from 22 July 2019

Akbar Mohammadi Ajamloo; Karim Abbaszadeh; Reza Nasiri-Zarandi

141. An Investigation into Skill Leveled Operators in a Multi-Period Cellular Manufacturing System with the Existence of Multi-Functional Machines

Articles in Press, Accepted Manuscript, Available Online from 22 July 2019

Majid Rafiee; Atiyeh Mohamaditalab

142. Performance evaluation of aluminium oxide nano particles in cutting fluid with MQL technique in turning of hardened AISI 4340 alloy steel

Articles in Press, Accepted Manuscript, Available Online from 22 July 2019

Anshuman DAS; Saroj Kumar Patel; Bibhuti Bhushan Biswal; Sudhansu Ranjan Das

143. Synchronized Timetables for Bus Rapid Transit Networks in Small and Large Cities

Articles in Press, Accepted Manuscript, Available Online from 22 July 2019

Shervin Ataeian; Maghsud Solimanpur; Mahdi Amiripour; Ravi Shankar

144. Fatigue and fracture behavior of A516 steel used in thick-walled pressure vessels

Articles in Press, Accepted Manuscript, Available Online from 22 July 2019

Hossein Ghasemi; Reza Masoudi Nejad; Ahmad Jalayerian Darbandi; Mahmoud Shariati; Yaghoub Tadi Beni

145. Improved Multi-Ant-colony algorithm for solving Multi-Objective Vehicle Routing Problems

Articles in Press, Accepted Manuscript, Available Online from 30 July 2019

Rajeev Goel; Raman Maini

146. Effects of initial suction and degree of saturation on dynamic properties of sand at large strain

Articles in Press, Accepted Manuscript, Available Online from 06 August 2019

Fardin Jafarzadeh; Adel Ahmadinezhad; Hamed Sadeghi

147. Model Reference Adaptive Control (MRAC) of a Small Satellite in the Presence of Parameters Uncertainties

Articles in Press, Accepted Manuscript, Available Online from 10 August 2019

karim ahmadi dastgerdi; farshad pazooki; Jafar Roshanian

148. Two Low Computational Complexity Improved Multiband Structured Subband Adaptive Filter Algorithms

Articles in Press, Accepted Manuscript, Available Online from 10 August 2019

Mohammad Shams Esfand Abadi; John Hakon Husoy; Mohammad Ahmadi

149. An Improved Red Deer Algorithm to Address a Direct Current Brushless Motor Design Problem

Articles in Press, Accepted Manuscript, Available Online from 10 August 2019

Amir Mohammad Fathollahi-Fard; Milad Niaz Azari; Mostafa Hajiaghaei-Keshteli

150. The effect of transportation and safety attitudes, personality, and lifestyle on vehicle type choice: a case study of Tehran

Articles in Press, Accepted Manuscript, Available Online from 10 August 2019

Ali Mohammadi; Mohammad Kermanshah

151. A Methodology for Examining the Chaotic Behavior of the CoP Signal during the Quiet Standing Based on Empirical Mode Decomposition Method

Articles in Press, Accepted Manuscript, Available Online from 26 August 2019

Hamid reza Kobravi; Rahel Hajipour; Fateme Asadollahzadeh Shamkhal

152. An Integrated Quay Crane Assignment and Scheduling Problem with Several Contractors in Container Terminals

Articles in Press, Accepted Manuscript, Available Online from 26 August 2019

Mojgan Safaeian; Farhad Etebari; Behnam Vahdani

153. A hybrid model for online prediction of PM2.5 concentration: A case study

Articles in Press, Accepted Manuscript, Available Online from 02 September 2019

yasaman S. Sadabadi; Majid Salari; reza Esmaili

154. Polygonal Tubular Linear Permanent Magnet Generator Analysis and Experimental Test

Articles in Press, Accepted Manuscript, Available Online from 02 September 2019

serdal arslan; Osman Gurdal

155. Development of an Ensemble Learning-based intelligent model for Stock Market Forecasting

Articles in Press, Accepted Manuscript, Available Online from 02 September 2019

Behrouz minaei; mohammad taghi faghihi nezhad

156. On the Bayesian Analysis of Two-Component Mixture of Transmuted Weibull Distribution

Articles in Press, Accepted Manuscript, Available Online from 02 September 2019

Rahila Yousaf; Sajid Ali; Muhammad Aslam

157. Estimation of General Parameter Under Stratified Adaptive Cluster Sampling Based on Dual Use of Auxiliary Information

Articles in Press, Accepted Manuscript, Available Online from 02 September 2019

Faryal Younis; Javid Shabbir

158. Resilient supplier selection in complex product and its subsystems’ supply chain under uncertainty and risk disruption: A case study for satellite components

Articles in Press, Accepted Manuscript, Available Online from 02 September 2019

Omid Solgi; Jafar Gheidar-Kheljani; Ehsan Dehghani; Alireza Taromi

159. A Dual- Stator Machine with Diametrically Magnetized PM: Analytical Air-gap Flux Calculation, Efficiency Optimization and Comparison with Conventional Dual-Stator Machines

Articles in Press, Accepted Manuscript, Available Online from 02 September 2019

Shahin Asgari; Reza Yazdanpanah; Mojtaba Mirsalim

160. An incentive-based policy on reduction of GHG emissions and loss minimization using adaptive group search multi-objective optimization algorithm

Articles in Press, Accepted Manuscript, Available Online from 02 September 2019

mohammad hassan nazari; Seyed Hossein Hosseinian; Ehsan Azad-farsani; Davood Faramarzi

161. Flexible flow shop scheduling problem to minimize makespan with renewable resources

Articles in Press, Accepted Manuscript, Available Online from 02 September 2019

Nariman Abbaszadeh; Ebrahim Asadi-Gangraj; saeed emami

162. A chaotic iterative fuzzy modeling of circulating a simple sentence

Articles in Press, Accepted Manuscript, Available Online from 08 September 2019

Nazanin Zandi-Mehran; Fahimeh Nazarimehr; Abdul Jalil M. Khalaf; sajad jafari; Julien. C. Sprott

163. “Plant-mediated green synthesis of Ag nanoparticles using Rauvolfia tetraphylla (L.) flower extracts: Characterization, Biological activities and screening of their catalytic activity in formylation reaction”

Articles in Press, Accepted Manuscript, Available Online from 14 September 2019

Vinay s p; Udayabhanu Udayabhanu; Nagaraju G; Lalithamba HS; Chandrasekhar N

164. An Efficient Mixed-Memory-Type Control Chart for Normal and Non-Normal Processes

Articles in Press, Accepted Manuscript, Available Online from 14 September 2019

Hafiz Zafar Nazir; Muhammad Abid; Noureen Akhtar; Muhammad Riaz; Sadia Qamar

165. Price, delivery time and retail service sensitive dual channel supply chain

Articles in Press, Accepted Manuscript, Available Online from 14 September 2019

Brojeswar Pal; Leopoldo Eduardo Cardenas-Barron; Kripasindhu Chaudhuri

166. Control and stability analysis of VSC-HVDC based transmission system connected to offshore wind farm

Articles in Press, Accepted Manuscript, Available Online from 14 September 2019

Ali Haghi; Mohsen Rahimi

167. A Comparative Analysis of The New Excitation Controlled Synchronous Generator-Based Wind Turbine

Articles in Press, Accepted Manuscript, Available Online from 17 September 2019

Ali Shamsnia; Mostafa Parniani

168. Design and Optimization of a Large-Scale Permanent Magnet Synchronous Generator

Articles in Press, Accepted Manuscript, Available Online from 17 September 2019

Mehdi Alemi-Rostami; Ghasem Rezazadeh; Ramin Alipour-Sarabi; Farzad Tahami

169. Size dependent analysis of tapered FG micro-bridge based on a 3D beam theory

Articles in Press, Accepted Manuscript, Available Online from 17 September 2019

Shadi Haddad; Mohammad Reza Zakerzadeh; Mostafa Baghani

170. Exergy, exergoeconomic and exergoenvironmental assessments and optimization of a novel solar cascade organic Rankine cycle assisted hydrogen liquefaction cycle

Articles in Press, Accepted Manuscript, Available Online from 28 September 2019

F. A. Boyaghchi; Arezoo Sohbatloo

171. Designing a sustainable agile retail supply chain using multi-objective optimization methods (Case Study: SAIPA Company)

Articles in Press, Accepted Manuscript, Available Online from 28 September 2019

Ebrahim Azizi; Hassan Javanshir; Favoud Jafari; Sadoullah Ebrahimnejad

172. Economic Order Quantity for Imperfect Quality Items Under Inspection Errors, Batch Replacement and Multiple Sales of Returned Items

Articles in Press, Accepted Manuscript, Available Online from 08 October 2019

Hadi Mokhtari; Javad Asadkhani

173. A heuristic method for choosing 'virtual best' DMUs to enhance discrimination power of augmented DEA model

Articles in Press, Accepted Manuscript, Available Online from 08 October 2019

Marzieh Rezaei; Abdorrahman Haeri

174. On the well-posedness, equivalency and low-complexity translation techniques of discrete-time hybrid automaton and piecewise affine systems

Articles in Press, Accepted Manuscript, Available Online from 08 October 2019

Mohammad Hejri; Hossein Mokhtari

175. MHD Micropolar Fluid over Curved Stretching Surface with modified Fourier law

Articles in Press, Accepted Manuscript, Available Online from 13 October 2019

Ambreen Afsar Khan; Rabia Batool; Nabeela Kousar

176. Simulations of nonlinear advection-diffusion models through various finite element techniques

Articles in Press, Accepted Manuscript, Available Online from 13 October 2019

Huseyin Tunc; Murat Sari

177. A Numerical Investigation of Synthetic Jet Effect on Dynamic Stall Control of Oscillating Airfoil

Articles in Press, Accepted Manuscript, Available Online from 13 October 2019

ali shokrgozar abbasi; Shima Yazdani

178. An approximate methodology to simulate combined conduction-radiation heat transfer for multi-layer insulator

Articles in Press, Accepted Manuscript, Available Online from 13 October 2019

Amin Torabi; Ali Abedian; Mohammad Ali Farsi

179. POSTFATIGUE LIFE PREDICTION OF GLARE SUBJECTED TO LOW-VELOCITY IMPACT

Articles in Press, Accepted Manuscript, Available Online from 13 October 2019

Alireza Sedaghat; Majid Alitavoli; Abolfazl Darvizeh; Reza Ansari Khalkhali

180. Government subsidies in manufacturing and remanufacturing with consumer segment and heterogeneous demand

Articles in Press, Accepted Manuscript, Available Online from 13 October 2019

Lang Xu; Qiaoyu Peng; Jihong Chen; Chuanxu Wang

181. Fuzzy Cognitive Mapping Approach for Assessing Industry 4.0 Tendency

Articles in Press, Accepted Manuscript, Available Online from 13 October 2019

Alper Kiraz; Özer Uygun; Enes Erkan; Onur Canpolat

182. What can fuzziness do for capability analysis based on fuzzy data

Articles in Press, Accepted Manuscript, Available Online from 13 October 2019

Sy-Mien Chen; Tzu-Ming Hung

183. Novel Exponential divergence measure of complex intuitionistic fuzzy sets with an application to decision-making process

Articles in Press, Accepted Manuscript, Available Online from 13 October 2019

Harish Garg; Dimple Rani

184. Balancing the Portfolio of Urban and Public Projects with Distance-Dependent Coverage Facilities

Articles in Press, Accepted Manuscript, Available Online from 14 October 2019

Ghasem Mokhtari; Elmira Sadat Mozneb Imamzadeh

185. A modular Takagi-Sugeno-Kang (TSK) system based on a modified hybrid soft clustering for stock selection

Articles in Press, Accepted Manuscript, Available Online from 20 October 2019

Somayeh Mousavi; Akbar Esfahanipour; Mohammad Hossein Fazel Zarandi

186. Developing an Iterative Procedure to Estimate Origin-Destination Matrix Based on Two-Point License Plate Tracking Systems

Articles in Press, Accepted Manuscript, Available Online from 20 October 2019

Mohammad Teimouri; Majid Sheikhmohammady; Ali Husseinzadeh Kashan; Amir Abbas Shojaiea

187. Thermodynamic analysis of a novel solar trigeneration system

Articles in Press, Accepted Manuscript, Available Online from 22 October 2019

Vahid Beygzadeh; Shahram Khalilarya; Iraj Mirzaee; Gholamreza Miri; Vahid Zare

188. Effect of distribution pattern of DSM columns on the efficiency of liquefaction mitigation

Articles in Press, Accepted Manuscript, Available Online from 28 October 2019

H. DehqanKhalili; A. Ghalandarzadeh; M. Moradi; R. Karimzadeh

189. Implementing new variables RGS plan based on EWMA yield index

Articles in Press, Accepted Manuscript, Available Online from 03 November 2019

Marziyeh nesaee; mohammad saber Fallahnezhad

190. Hot-film/hot-wire anemometer calibration for low velocities using image processing

Articles in Press, Accepted Manuscript, Available Online from 03 November 2019

Milad Behzadi; Mohammad Hasan Ahmadi; Fathollah Ommi

191. Global optimization for Cross-domain aircraft based on Kriging model and par-ticle swarm optimization algorithm

Articles in Press, Accepted Manuscript, Available Online from 12 November 2019

Yanli Chen; Jingchun Qin; Huapeng Sun; Tao Shang; Xinge Zhang; Yi Hu

192. Expansion Planning of Automated Sub-transmission and Distribution Networks integrated by Distributed Generations

Articles in Press, Accepted Manuscript, Available Online from 12 November 2019

Mohammad Zohuratar; Jamshid Aghaei; Taher Niknam; Ahmad Nikoobakht

193. Variable Sample Size EWMA Chart With Measurement Errors

Articles in Press, Accepted Manuscript, Available Online from 12 November 2019

Zeynab Hassani; Amirhossein Amiri; Philippe CASTAGLIOLA

194. Scheduling of periodic services to customers in dispersed locations from heterogeneous multi-agent companies considering uncertainty: A real case study

Articles in Press, Accepted Manuscript, Available Online from 12 November 2019

H. Jafar-Zanjani; Mostafa Zandieh; M. Khalilzadeh

195. Designing and analyzing two non-invasive current sensors using Ampere Force Law (AFL)

Articles in Press, Accepted Manuscript, Available Online from 17 November 2019

M. Reza Zamani Kouhpanji

196. Predicting primary energy consumption using NDGM(1,1,k,c) model with Simpson formula

Articles in Press, Accepted Manuscript, Available Online from 18 November 2019

Xin Ma; Wenqing Wu; Yong Wang; Bo Zeng; Wei Cai

197. Development of MEMS gas actuator for analyzing a gas mixture

Articles in Press, Accepted Manuscript, Available Online from 18 November 2019

Huawei Wu; R. Moradi; M. Barzegar Gerdroodbary; MohamadMahdi Shahbazi

198. Experimental, Numerical and Finite Element Vibration Analysis of Delaminated Composite Plate

Articles in Press, Accepted Manuscript, Available Online from 25 November 2019

Muhammad Imran; Rafiullah Khan; Saeed Badshah

199. Assessment of Optimum Slurry Pipe Design for Minimum Erosion

Articles in Press, Accepted Manuscript, Available Online from 07 December 2019

Vikas Kannojiya; Satish Kumar

200. Mathematical modeling for a new portfolio selection problem in bubble condition, using a new risk measure

Articles in Press, Accepted Manuscript, Available Online from 07 December 2019

Alireza Ghahtarani; Majid Sheikhmohammady; Amir Abbas Najafi

201. Robust parameter design based on response surface model under considering measurement errors

Articles in Press, Accepted Manuscript, Available Online from 22 December 2019

Feng Wu; Yizhong Ma; Jianjun Wang

202. A NEW GROUND MOTION RECORD SELECTION PROCEDURE BASED ON THE EFFECTS OF SPECTRAL SHAPE AND PERIOD ELONGATION

Articles in Press, Accepted Manuscript, Available Online from 22 December 2019

Saber Ale Saheb Fosoul; H. Tajmir Riahi; Nima Hatami

203. Tuning the Implementable Structures of Fractional-Order PID Controllers for Control of FOPDT Processes

Articles in Press, Accepted Manuscript, Available Online from 22 December 2019

Mehrdad Ashjaee; Mohammad Saleh Tavazoei

204. Damping estimation of a double layer grid with ball joint system by output-only modal identification

Articles in Press, Accepted Manuscript, Available Online from 22 December 2019

Seyed Rasoul Nabavian; Mohammad Reza Davoodi; Bahram Navayi Neya; Seyedamin Mostafavian

205. A multi-attribute decision making method based on the third generation prospect theory and grey correlation degree

Articles in Press, Accepted Manuscript, Available Online from 22 December 2019

Peide Liu; Xiaoxiao Liu

206. An LMI approach to short-term memory discrete-time FIR controller design for integrating time-delay processes

Articles in Press, Accepted Manuscript, Available Online from 22 December 2019

Hamideh Najafizadegan; Farshad Merrikh-Bayat

207. Generation Rejection Scheme Based-on a Combinational Rotor Angle Trajectory Prediction

Articles in Press, Accepted Manuscript, Available Online from 22 December 2019

aliakbar hajnorouzi; Farokh Amini-far; heidarali shayanfar

208. A Fuzzy Multi-Criteria Approach for Sustainable Island-based Tourism Development

Articles in Press, Accepted Manuscript, Available Online from 22 December 2019

Ahmad Abrishamchi; Ali Asghar Moonesan; Reza Maknoon

209. Comparison of Static Pushover Analysis and IDA-Based Probabilistic Methods in Assessing the Seismic Performance Factors of Diagrid Structures

Articles in Press, Accepted Manuscript, Available Online from 22 December 2019

Ali Seyedkazemi; Fayaz Rahimzadeh Rofooei

210. Tunable Active Grounded Lossless and Lossy Inductance Simulators with Single Grounded Capacitor Using VDBAs

Articles in Press, Accepted Manuscript, Available Online from 23 December 2019

Worapong Tangsrirat; Wanlop Surakampontorn

211. Multi-criteria group decision-making method based on generalized power harmonic aggregation operators with normal intuitionistic fuzzy numbers

Articles in Press, Accepted Manuscript, Available Online from 23 December 2019

Hong-gang Peng; Jing Wang; Jian-qiang Wang

212. Estimating Prevalence of Sensitive Attribute with Optional Unrelated Question Randomized Response Models under Simple and Stratified Random Sampling

Articles in Press, Accepted Manuscript, Available Online from 23 December 2019

Ghulam Narjis; Javid Shabbir

213. Electricity Market Assessment in Wind Energy Integrated Power Systems with the Potential of Flexibility: A Boundary Condition Approach

Articles in Press, Accepted Manuscript, Available Online from 23 December 2019

Hassan Gharibpour; Farokh Amini-far

214. Metaheuristics for A New MINLP Model with reduced response time for On-line Order Batching

Articles in Press, Accepted Manuscript, Available Online from 29 December 2019

Leily Hojaghania; javad Nematian; Amir Abbas Shojaiea; Mehrdad Javadi

215. An integrated fuzzy QFD-MCDM framework for personnel selection problem

Articles in Press, Accepted Manuscript, Available Online from 29 December 2019

Elif Ozgormus; Hacer Guner Goren; Ahmet Senocak

216. Measuring congestion in data envelopment analysis without solving any models

Articles in Press, Accepted Manuscript, Available Online from 29 December 2019

Sarah Navidi; Mohsen Rostamy-Malkhalifeh; Farhad Hosseinzadeh Lotfi

217. Numerical Simulation of a Neuron under Blast Load Using Viscoelastic Material Models

Articles in Press, Accepted Manuscript, Available Online from 29 December 2019

Hossein Ahmadi Nejad joushani; Bahman Vahidi; Mohammad Hossein Sabour

218. Performance Evaluation in Aggregate Production Planning Using Integrated RED-SWARA Method under Uncertain Condition

Articles in Press, Accepted Manuscript, Available Online from 04 January 2020

Javad Khalili; Alireza Alinezhad

219. Forecasting and making policies for Postal Services: system dynamics approach (Iran Post Company as a case study)

Articles in Press, Accepted Manuscript, Available Online from 04 January 2020

Marzieh Zarinbal; Hamidreza Izadbakhsh; Salman Shahvali; Ramin HosseinAlizadeh; Fariba ZadehLabaf

220. Macrophage+: a Game With a Purpose for Applying Human Intelligence in Control Mechanisms

Articles in Press, Accepted Manuscript, Available Online from 12 January 2020

Ali Tarihi; Hassan Haghighi; Fereidoon Shams Aliee; Amirmehdi Setarenejad

221. Comparison of disparate solid volume fraction ratio of hybrid nanofluids flow over a permeable flat surface with aligned magnetic field and Marangoni convection

Articles in Press, Accepted Manuscript, Available Online from 12 January 2020

A.K. Abdul Hakeem; N. Indumathi; B. Ganga; M.K. Nayak

222. Solving a new bi-objective model for relief logistics in a humanitarian supply chain by bi-objective meta-heuristic algorithms

Articles in Press, Accepted Manuscript, Available Online from 12 January 2020

Hooman Madani; Alireza Arshadi Khamseh; Reza Tavakkoli-Moghaddam

223. Design of optimum vibration absorbers for a bus vehicle to suppress unwanted vibrations against the harmonic and random road excitations

Articles in Press, Accepted Manuscript, Available Online from 12 January 2020

Alireza Rezazadeh; Hamed Moradi

224. Prediction of discharge flow rate beneath sheet piles using gene expression programming based on scaled boundary finite element modelling database

Articles in Press, Accepted Manuscript, Available Online from 12 January 2020

A. Johari; Abbas Talebi; Ahmad Heydari

225. Sensitivity Analysis and Optimization of the surface Roughness in the Incremental Forming of mild Steel Sheets

Articles in Press, Accepted Manuscript, Available Online from 13 January 2020

MH Shojaeefrd; Abolfazl Khalkhali; Shahaboddin Shahbaz

226. Cooperative cellular manufacturing system: a cooperative game theory approach

Articles in Press, Accepted Manuscript, Available Online from 18 January 2020

Mahya Tavanayi; Ashkan Hafezalkotob; Jaber Valizadeh

227. Product Acceptance Determination by Two Suppliers with Linear Profiles

Articles in Press, Accepted Manuscript, Available Online from 18 January 2020

Muhammad Aslam; Muhammad Azam; Chi-Hyuck Jun

228. Multi-echelon green open-location-routing problem: A robust-based stochastic optimization approach

Articles in Press, Accepted Manuscript, Available Online from 18 January 2020

Roghaye Vakili; Mohsen Akbarpour Shirazi; Hossein Gitinavard

229. Numerical simulation of turbulent oscillating flow in porous media

Articles in Press, Accepted Manuscript, Available Online from 18 January 2020

Amin Kardgar; A. Jafarian

230. A simplified analytical model to predict heating performance of single U-tube ground heat exchangers

Articles in Press, Accepted Manuscript, Available Online from 18 January 2020

Masoud Mohammadian Korouyeh; Mohammad Hassan Saidi; Mohammad Najafi; Cyrus Aghanajafi

231. Measuring skewness: we don’t assume much

Articles in Press, Accepted Manuscript, Available Online from 28 January 2020

Akbar Khan; Zawar Hussain; Salman Arif Cheema; Abdel-Salam G. A.

232. Two-stage game-theoretic approach to supplier evaluation, selection and order assignment

Articles in Press, Accepted Manuscript, Available Online from 09 February 2020

Hui Ming Wee; Jonas Yu; Schnell Jeng; Yosef Daryanto

233. Investigation of Harmonic Effects in Locational Marginal Pricing and Developing a Framework for LMP Calculation

Articles in Press, Accepted Manuscript, Available Online from 09 February 2020

Mahmood Narimani; Hossein Hosseinian

234. Wardrop’s First Principle: Extension for Capacitated Networks

Articles in Press, Accepted Manuscript, Available Online from 12 February 2020

Hedayat Zokaei Aashtiani; Hossain Poorzahedy; Mehdi Nourinejad

235. Flexural Retrofitting of the Damaged Reinforced Concrete Beams by Using HPFRCC

Articles in Press, Accepted Manuscript, Available Online from 12 February 2020

M.Kazem Sharbatdar; Javad Ayyubi

236. Bridge backwater estimation: A Comparison between artificial intelligence models and explicit equations

Articles in Press, Accepted Manuscript, Available Online from 12 February 2020

Majid Niazkar; N. Talebbeydokhti; S.-H. Afzali

237. Life-Cycle Cost Analysis (LCCA) of RC Bridges Subjected to Multiple Hazards

Articles in Press, Accepted Manuscript, Available Online from 12 February 2020

Payam Asadi; Somayeh Hamed Ranjkesh; Ali Zeinal Hamedani

238. Dispersion of Stoneley waves through the irregular common interface of two hydrostatic stressed MTI media

Articles in Press, Accepted Manuscript, Available Online from 12 February 2020

Soumitra Chowdhury; Santimoy Kundu; PARVEZ ALAM; Shishir Gupta

239. Multiple attribute decision making based on Muirhead mean operators under 2-tuple linguistic Pythagorean fuzzy environment

Articles in Press, Accepted Manuscript, Available Online from 19 February 2020

Xiumei Deng; Jie Wang; Guiwu Wei; Cun Wei

240. A novel fuzzy bi-objective vehicle routing and scheduling problem with time window constraint for a distribution system: A case study

Articles in Press, Accepted Manuscript, Available Online from 19 February 2020

Ayda Esmaeili-Douki; Mahdi Mahzouni-Sani; Abbas Nikhalat Jahromi; Fariborz Jolai

241. A new bi-objective integrated vehicle transportation model considering simultaneous pick-up and split delivery

Articles in Press, Accepted Manuscript, Available Online from 19 February 2020

Navid Akbarpour; Reza Kia; Mostafa Hajiaghaei-Keshteli

242. Decision Tree-based Parametric Analysis of a CNC Turning Process

Articles in Press, Accepted Manuscript, Available Online from 19 February 2020

Shankar Chakraborty; Shruti Dandge

243. Entropy generation analysis in peristaltic flow of magneto-nanoparticles suspended in water under second order slip conditions

Articles in Press, Accepted Manuscript, Available Online from 19 February 2020

Tasawar Hayat; Sadaf Nawaz; A. Alsaedi

244. Hemodynamic analysis of coronary artery bypass grafting with elastic Walls and different stenosis

Articles in Press, Accepted Manuscript, Available Online from 19 February 2020

Hooman Fallahi; Ebrahim Shirani; Elnaz Zohravi

245. Forecasting Ambient Air Pollutants by Box-Jenkins Stochastic Models in Tehran

Articles in Press, Accepted Manuscript, Available Online from 29 February 2020

Jalal Delaram; Majid Khedmati

246. Price and Quality Decisions in Heterogeneous Markets

Articles in Press, Accepted Manuscript, Available Online from 29 February 2020

Nafiseh Sedghi; Hassan Shavandi

247. Evolution of IT, Management and Industrial Engineering research: a topic model approach

Articles in Press, Accepted Manuscript, Available Online from 29 February 2020

Mohammad Rabiei; Seyyed-Mahdi Hosseini-Motlagh; Abdorrahman Haeri; Behrouz minaei bidgoli

248. Theoretical and experimental investigation of design parameter effects on the slip phenomenon and performance of a centrifugal compressor

Articles in Press, Accepted Manuscript, Available Online from 11 March 2020

Shahram Rajabpour; Mehrdaad Taghizadeh Manzari; Ali Hajilouy-Benisi

249. Electrochemical determination of glutathione in hemolysed erythrocytes

Articles in Press, Accepted Manuscript, Available Online from 11 March 2020

Mohammd Mazloum-Ardakani; Zahra Tavakolian-Ardakani; Hossein Banitaba

250. A Combined Benders Decomposition and Lagrangian Relaxation Algorithm for Optimizing a Multi-Product, Multi-Level Omni-Channel Distribution System

Articles in Press, Accepted Manuscript, Available Online from 09 April 2020

ayad hendalianpour; Mahnaz Fakhrabadi; Mohamad Sadegh Sangari; Jafar Razmi

251. Developing a mathematical model for staff routing and scheduling in home health care industries: Genetic Algorithm based solution scheme

Articles in Press, Accepted Manuscript, Available Online from 09 April 2020

Zahra Entezari; Masoud Mahootchi

252. Maclaurin symmetric Means for Linguistic Z-numbers and Their Application to Multiple-Attribute Decision Making

Articles in Press, Accepted Manuscript, Available Online from 09 April 2020

Peide Liu; weiqiao Liu

253. A two-echelon newsvendor problem with limited budget and capacity

Articles in Press, Accepted Manuscript, Available Online from 11 April 2020

Maryam Yazdi; Seyed Hamid Reza Pasandideh

254. Dynamic pricing in a semi-centralized dual-channel supply chain with a reference price dependent demand and production cost disruption: the case of Iran Khodro Company

Articles in Press, Accepted Manuscript, Available Online from 14 April 2020

Farnia Zarouri; seyed hessamedin zegordi; Ali Husseinzadeh Kashan

255. Optimal Design and Analysis of a Novel Reluctance Axial Flux Magnetic Gear

Articles in Press, Accepted Manuscript, Available Online from 14 April 2020

Seyed Ahmadreza Afsari Kashani

256. Tele-operation of Autonomous Vehicles over AWGN Channel

Articles in Press, Accepted Manuscript, Available Online from 14 April 2020

Ali Parsa; Alireza Farhadi

257. Difference-Type-Exponential Estimators Based on Dual Auxiliary Information Under Simple Random Sampling

Articles in Press, Accepted Manuscript, Available Online from 21 April 2020

Muhammad Irfan; Maria Javed; Sajjad Haider Bhatti

258. Three-valued soft set and its multi-criteria group decision making via TOPSIS and ELECTRE

Articles in Press, Accepted Manuscript, Available Online from 21 April 2020

Hüseyin Kamacı; Eyüp Akçetin

259. Experimental Investigation on Effect of Winged Sleeper on Lateral Resistance of Ballasted Track

Articles in Press, Accepted Manuscript, Available Online from 21 April 2020

J.A. Zakeri; Hamid Hassanrezaei

260. Nonlinear oscillations of viscoelastic microcantilever beam based on modified strain gradient theory

Articles in Press, Accepted Manuscript, Available Online from 21 April 2020

Farshad Taheran; M. T. Ahmadian; Keikhosrow Firoozbakhsh

261. Body waves propagation in a fluid-saturated transversely isotropic poroelastic solid with a potential method

Articles in Press, Accepted Manuscript, Available Online from 21 April 2020

Morteza Eskandari-Ghadi; Mohammadreza Mahmoodian; Ali Nikkhoo

262. Developing a Solution for Intelligent Urban Transportation Management Using the Internet of Things

Articles in Press, Accepted Manuscript, Available Online from 05 May 2020

Mehdi Bahrami; Neda Abdolvand; Saeedeh Rajaee Harandi

263. Performance of CFRP Confined Pultruded GFRP-Concrete Composite Columns Subjected to Cyclic and Monotonic Compressive Loading

Articles in Press, Accepted Manuscript, Available Online from 05 May 2020

Mohsen Ishaqian; Abolghassem Keramati

264. A Design of mass-spring type piezoelectric energy harvesting

Articles in Press, Accepted Manuscript, Available Online from 05 May 2020

Sibel Akkaya Oy

265. Research on Impact of Shenzhen-Hong Kong Stock Connect Mechanism on the Volatility of Stock Markets

Articles in Press, Accepted Manuscript, Available Online from 05 May 2020

Cheng Wang; Congjun Rao; Ying Meng; Xingrong Sun

266. Exploring Worker’s Absence Pattern in the Construction Industry in Iran

Articles in Press, Accepted Manuscript, Available Online from 07 May 2020

Amin Alvanchi; Amirhosein Hashemi

267. Extending Concepts of Mapping of Human Brain to Artificial Intelligence and Neural Networks

Articles in Press, Accepted Manuscript, Available Online from 19 May 2020

Abdolreza Joghataie

268. A parametric study on the mechanical role of fibrillar rotations in an articular cartilage finite element model

Articles in Press, Accepted Manuscript, Available Online from 19 May 2020

Seyed Shayan Sajjadinia; Mohammad Haghpanahi

269. Time-Frequency Analysis and Transitional Boundary Layer Investigation over a Pitching Airfoil

Articles in Press, Accepted Manuscript, Available Online from 19 May 2020

Hassan Akhlaghi; M. R. Soltani

270. A comparative study of Economic Load Dispatch with complex non-linear constraints using Salp Swarm Algorithm

Articles in Press, Accepted Manuscript, Available Online from 30 May 2020

Kuntal Bhattacharjee; Nitish Patel

271. Robust optimization approach for pricing and shelf space decisions with uncertain demand

Articles in Press, Accepted Manuscript, Available Online from 30 May 2020

Mohsen S. Sajadieh; Mohsen Danaei

272. Efficient Estimation of Population Median Using Supplementary Variable

Articles in Press, Accepted Manuscript, Available Online from 30 May 2020

Siraj Muneer; Alamgir Khalil; Javid Shabbir; Ghulam Narjis

273. An Optimal Radiation Pattern Synthesis and Correction of Mutually Coupled Circular Dipole Antenna Array

Articles in Press, Accepted Manuscript, Available Online from 30 May 2020

Avishek Das; Durbadal Mandal; Rajib Kar

274. Tensile Creep Monitoring of Basalt Fiber Reinforced Polymers Plates via Electrical Potential Change and Artificial Neural Network

Articles in Press, Accepted Manuscript, Available Online from 01 June 2020

Wael Altabey; Mohammad Noori; Ali Alarjani; Ying Zhao

275. Prediction of the size of silver nanoparticles prepared via green synthesis: A gene expression programming approach

Articles in Press, Accepted Manuscript, Available Online from 01 June 2020

Roshana Sattari; Gholam Reza Khayati

276. Optimizing two multi-echelon inventory systems for perishable products with price and stock dependent demand in supply chain

Articles in Press, Accepted Manuscript, Available Online from 01 June 2020

Zhuo Dai; Kuo Gao; Xiaoting Zheng

277. Environmental effects in an integrated hub location and pricing problem

Articles in Press, Accepted Manuscript, Available Online from 01 June 2020

Mohaddese Mohammadi; Hossein Karimi

278. Security constrained optimal power flow in a power system based on energy storage system with high wind penetration

Articles in Press, Accepted Manuscript, Available Online from 01 June 2020

Hossein Ebrahimi; Mehdi Abapour; Behnam Mohammadi-Ivatloo; Sajjad Golshannavaz

279. Application of grey correlation-based EDAS method for parametric optimization of non-traditional machining processes

Articles in Press, Accepted Manuscript, Available Online from 01 June 2020

Partha Protim Das; Shankar Chakraborty

280. A branch oriented active power loss allocation method for radial distribution networks with distributed generators

Articles in Press, Accepted Manuscript, Available Online from 01 June 2020

Ambika Hota; Sivkumar Mishra

282. Performance and dynamic response enhancement of PMSG based wind turbines employing boost converter-diode rectifier as the machine-side converter

Articles in Press, Accepted Manuscript, Available Online from 01 June 2020

Amir Noori Khezrabad; Mohsen Rahimi

283. Complex q-Rung Orthopair Fuzzy Variation Co-efficient Similarity Measures and their Approach in Medical Diagnosis and Pattern Recognition

Articles in Press, Accepted Manuscript, Available Online from 01 June 2020

Peide Liu; Tahir Mahmood; Zeeshan Ali

284. Reliability and Cost Optimization of a System with k-out-of-n Configuration and Choice of Decreasing the Components Failure Rates

Articles in Press, Accepted Manuscript, Available Online from 01 June 2020

Mani Sharifi; Ghasem Cheragh; Kamran Dashti Maljaii; Arash Zaretalab; Mohammadreza Shahriari

285. PV/BESS to support electric vehicle charging station integration in a capacity constrained power distribution grid using MCTLBO

Articles in Press, Accepted Manuscript, Available Online from 08 June 2020

Kumari Kasturi; Manas Nayak; Chinmay Nayak

286. Single-valued neutrosophic linguistic reducible weighted MSM for tourism mobile e-commerce service quality evaluation

Articles in Press, Accepted Manuscript, Available Online from 08 June 2020

Xindong Peng

287. Maintenance policy selection considering resilience engineering by a new interval-valued fuzzy decision model under uncertain conditions

Articles in Press, Accepted Manuscript, Available Online from 08 June 2020

N. Foroozesh; S.M. Mousavi; M. Mojtahedi; H. Gitinavard

288. A New Nonparametric Composite Exponentially Weighted Moving Average Sign Control Chart

Articles in Press, Accepted Manuscript, Available Online from 08 June 2020

Muhammad Raza; Muhammad Aslam; MUHAMMAD FAROOQ; Tanvir Ahmad; Rehan Ahmad Sherwani; Sajjad Haider Bhatti

289. Computational Analysis for Unsteady and Steady Magnetohydrodynamic Radiating Nano Fluid Flow past a Slippery Stretching Sheet Immersed in a Permeable Medium

Articles in Press, Accepted Manuscript, Available Online from 08 June 2020

Muhammad Farooq; Aisha Salahuddin; Mudassar Razzaq; Sabir Hussain; Asif Mushtaq

290. Linguistic Z-number Muirhead mean operators and their applications in ethical-financial portfolio selection

Articles in Press, Accepted Manuscript, Available Online from 08 June 2020

Amir Hosein Mahmoodi; Seyed Jafar Sadjadi; Soheil Sadi-Nezhad; Roya Soltani; Farzad Movahedi Sobhani

291. Metaheuristics for a bi-objective green vendor managed inventory problem in a two-echelon supply chain network

Articles in Press, Accepted Manuscript, Available Online from 08 June 2020

Mohammad Mahdi Karampour; Mostafa Hajiaghaei-Keshteli; Amir Mohammad Fathollahi-Fard; Guangdong Tian

292. Monitoring mean and variability by Gini chart for skew-normal distributed data

Articles in Press, Accepted Manuscript, Available Online from 08 June 2020

Mahsa Sasaei; Reza Pourmousa; Mashallah Mashinchi

293. A Vehicle Routing Problem with Two Types of Ships in Container Terminals

Articles in Press, Accepted Manuscript, Available Online from 08 June 2020

Mojgan Safaeian; Farhad Etebari; Behnam Vahdani

294. Stepwise pricing in evaluating revenue efficiency in Data Envelopment Analysis: A case study in power plants

Articles in Press, Accepted Manuscript, Available Online from 08 June 2020

Zohreh Moghaddas; Mohsen Vaez-Ghasemi; Farhad Hosseinzadeh Lotfi; Reza Farzipoor Saen

295. Determining optimal machine part replacement time using a hybrid ANN-GA model

Articles in Press, Accepted Manuscript, Available Online from 15 June 2020

Seda Gokler; Semra Boran

296. Impact of Adopting Quick Response and Agility on Supply Chain Competition with Strategic Customer Behavior

Articles in Press, Accepted Manuscript, Available Online from 15 June 2020

Mohammad Kaviyani-Charati; Seyed Hassan Ghodsypour; Mostafa Hajiaghaei-Keshteli

298. Sequential Nonlinear Encoding; A Low Dimensional Regression Algorithm with Application to EEG based Driving Fatigue Detection

Articles in Press, Accepted Manuscript, Available Online from 15 June 2020

Mohsen Tabejamaat; Hoda Mohammadzade

300. Deposition of anti-stick coatings to prevent hydrocarbon buildup on truck engines

Articles in Press, Accepted Manuscript, Available Online from 15 June 2020

Muhammad Awais

301. Electric discharge drilling with gas-assisted multi-hole slotted tool

Articles in Press, Accepted Manuscript, Available Online from 15 June 2020

Nishant K. Singh; Rajeev Upadhyay; Yashvir Singh; Abhishek Sharma

302. ML-CK-ELM: An efficient Multi-layer Extreme Learning Machine using Combined Kernels for Multi-label classification

Articles in Press, Accepted Manuscript, Available Online from 28 June 2020

Mohammad Rezaei; Mahdi Eftekhari; Farid Saberi Movahed

303. Parametric resonance domain of a parametric excited screen machine

Articles in Press, Accepted Manuscript, Available Online from 01 July 2020

Mohsen Zahedi; Iman Khatami; Abolfazl Zahedi

304. Numerical Prediction of Deflection and Stress Responses of Functionally Graded Structure for Grading Patterns (Power-Law, Sigmoid and Exponential) and Variable Porosity (Even/Uneven)

Articles in Press, Accepted Manuscript, Available Online from 01 July 2020

Prashik Malhari Ramteke; Kulmani Mehar; Nitin Sharma; Subrata Panda

Scientia Iranica

Journal Archive