Abachi, Parvin The effect of current density on microstructural homogeneity, hardness, fracture toughness and electrochemical behavior of electrodeposited Cu-0.5Co/WC nano-composite coating [Volume 24, Issue 6, 2017, Pages 3505-3511]
Abadyan, M. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
Abadyan, Mohamadreza A modified model for stability analysis of narrow-width NEMS tweezers: Corrections due to surface layer, scale dependency and force distributions [Volume 24, Issue 2, 2017, Pages 673-683]
Abam, M.A. Effiiently computing the smallest axis-parallel squares spanning all colors [Volume 24, Issue 3, 2017, Pages 1325-1334]
Abasifard, M. Petahertz-frequency plasmons in graphene nanopore and their application to nanoparticle sensing [Volume 24, Issue 3, 2017, Pages 1669-1677]
Abbas, N. Performance evaluation of joint monitoring control charts [Volume 24, Issue 4, 2017, Pages 2152-2163]
Abbasgholipour, M. Various types of ceramics used in radome: A review [Volume 24, Issue 3, 2017, Pages 1136-1147]
Abbasi, A. Preparation of MoO3/CuMoO4 nanoparticles as selective catalyst for olefin epoxidation [Volume 24, Issue 3, 2017, Pages 1203-1208]
Abbasi, Fateme The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
Abbasi, S.A. On enhanced sensitivity of nonparametric EWMA control charts for process monitoring [Volume 24, Issue 1, 2017, Pages 424-438]
Abbasi, S.A. Monitoring of serially correlated processes using residual control charts [Volume 24, Issue 3, 2017, Pages 1603-1614]
Abbasi, Zeinab The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
Abbassi, A. Numerical simulation of the effect of visitor's movement on bacteria-carrying particles distribution in hospital isolation room [Volume 24, Issue 3, 2017, Pages 1160-1170]
Abderezaei, Javid Transient behavior of electrostatically-actuated micro systems considering squeeze film damping and mechanical shock [Volume 24, Issue 6, 2017, Pages 2887-2894]
Abdollahnejad, Z. Increasing the flexural capacity of geopolymer concrete beams using partially deflection hardening cement-based layers: Numerical study [Volume 24, Issue 6, 2017, Pages 2832-2844]
Abdul Aziz, M.S. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
Abdullah, M.Z. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
Ab Ghani, A. Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel [Volume 24, Issue 3, 2017, Pages 1000-1009]
Abujiya, Mu’azu Ramat New EWMA S2 Control Charts for Monitoring Process Dispersion [Volume 24, Issue 1, 2017, Pages 378-389]
Adel, Farhad An investigation into the accelerometer mounting effects on signal transmissibility in modal measurements [Volume 24, Issue 5, 2017, Pages 2436-2444]
Adeli, H. Current efforts for prediction and assessment of natural disasters: Earthquakes, tsunamis, volcanic eruptions, hurricanes, tornados, and floods [Volume 24, Issue 6, 2017, Pages 2645-2664]
Adiutantov, N. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]
Afrazeh, Abbas A new model to optimize the knowledge exchange in industrial cluster: A case study of Semnan plaster production industrial cluster [Volume 24, Issue 2, 2017, Pages 834-846]
Afshar, M.H. An Adaptive Relaxed Cellular Automata Method for Reliability-Based Hydropower Operation of Reservoirs [Volume 24, Issue 5, 2017, Pages 2294-2306]
Afshin Hemmatyar, Ali Mohammad CMORC: Class-based Multipath On-demand Routing Protocol for Cognitive Radio Networks [Volume 24, Issue 6, 2017, Pages 3117-3131]
AfzaliTabar, M. Preference of Nano porous graphene to Single-Walled Carbon Nanotube (SWCNT) for preparing Silica Nano hybrid Pickering Emulsion for potential Chemical Enhanced Oil Recovery (C-EOR) [Volume 24, Issue 6, 2017, Pages 3491-3499]
Afzalzadeh, R. An Investigation on Effects of Applied Magnetic Field during Zn Vacuum Thermal Evaporation on ZnO Nanostructures [Volume 24, Issue 6, 2017, Pages 3526-3530]
Agarwal, Nikunj Some improved interactive aggregation operators under interval-valued intuitionistic fuzzy environment and its application to decision making process [Volume 24, Issue 5, 2017, Pages 2581-2604]
Aghayari, R. Investigating the seismic behavior of RC shear walls with openings strengthened with FRP sheets using different schemes [Volume 24, Issue 4, 2017, Pages 1855-1865]
Ahari, Mohammad Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
Ahmad, S. On enhanced sensitivity of nonparametric EWMA control charts for process monitoring [Volume 24, Issue 1, 2017, Pages 424-438]
Ahmadi, A. Amplitude reconstruction of clipped OFDM by using DFT-based least squares [Volume 24, Issue 3, 2017, Pages 1353-1362]
Ahmadi, G. Submicron particle deposition in pulmonary alveoli during cyclic breathing [Volume 24, Issue 4, 2017, Pages 1975-1984]
Ahmadi, Goodarz Airflow patterns in a 3D model of the human acinus [Volume 24, Issue 5, 2017, Pages 2379-2386]
Ahmadi, V. Petahertz-frequency plasmons in graphene nanopore and their application to nanoparticle sensing [Volume 24, Issue 3, 2017, Pages 1669-1677]
Ahmadi, Vahid A biosensor based on plasmonic wave excitation with diffractive grating structure [Volume 24, Issue 6, 2017, Pages 3441-3447]
Ahmadian, Hamid An investigation into the accelerometer mounting effects on signal transmissibility in modal measurements [Volume 24, Issue 5, 2017, Pages 2436-2444]
Ahmadian, M.T. Effect of size dependency on in-plane vibration of circular micro-rings [Volume 24, Issue 4, 2017, Pages 1996-2008]
Ahmadzadehtalatapeh, M. Feasibility study of a water-to-air heat pipe based heat exchanger for cooling load reduction and energy saving in the office buildings: A simulation study [Volume 24, Issue 3, 2017, Pages 1040-1050]
Ahmed, Naseer Dynamic Behaviour of β-Ti-15333 in Ultrasonically Assisted Turning: Experimental and Numerical Analysis [Volume 24, Issue 6, 2017, Pages 2904-2914]
Ak, T. Application of Petrov-Galerkin finite element method to shallow water waves model: Modified Korteweg-de Vries equation [Volume 24, Issue 3, 2017, Pages 1148-1159]
AKBABA, Mehmet Optimum Pole Arc Offset in Permanent Magnet Synchronous Generators for Obtaining Least Voltage Harmonics [Volume 24, Issue 6, 2017, Pages 3223-3230]
Akbari, AliAkbar Improving Lateral Dynamics of Vehicle Using Direct Yaw Moment Controller Based on Quantitative Feedback Theory [Volume 24, Issue 2, 2017, Pages 662-672]
Akbari, Javad Conditioning of vitrified and resin bond CBN grinding wheels using a picosecond laser [Volume 24, Issue 5, 2017, Pages 2369-2378]
Akbari Foroud, Asghar A New Solution Approach for Supply Function Equilibrium-based Bidding Strategy in Electricity Markets [Volume 24, Issue 6, 2017, Pages 3231-3246]
Akbarzadeh Bengar, Habib Effect of Steel and Concrete Coupling Beam on Seismic Behavior of RC Frame Accompanied with Coupled Shear Walls [Volume 24, Issue 5, 2017, Pages 2227-2241]
Akhavan Behabadi, M.A. Light Oil – Gas Two-Phase Flow Pattern Identification in Different Pipe Orientations: An Experimental Approach [Volume 24, Issue 5, 2017, Pages 2445-2456]
Akkaya, U. Application of trend analysis and artificial neural networks methods: The case of Sakarya River [Volume 24, Issue 3, 2017, Pages 993-999]
Alaei, M. Preference of Nano porous graphene to Single-Walled Carbon Nanotube (SWCNT) for preparing Silica Nano hybrid Pickering Emulsion for potential Chemical Enhanced Oil Recovery (C-EOR) [Volume 24, Issue 6, 2017, Pages 3491-3499]
Alam Khan, L. An integrated approach of quality for polymer composite manufacturing validated and optimized through Taguchi method [Volume 24, Issue 4, 2017, Pages 1985-1995]
Alemzadeh, I. Comparison and optimization of conjugated linoleic acid production by Lactobacillus plantarum and Lactobacillus plantarum subsp. plantarum [Volume 24, Issue 3, 2017, Pages 1272-1280]
Ali, A. Performance evaluation of joint monitoring control charts [Volume 24, Issue 4, 2017, Pages 2152-2163]
Ali, F. M. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
Ali, Norhashidah Hj. M. New High Accuracy Non-polynomial Spline Group Explicit Iterative Method for Two Dimensional Elliptic Boundary Value Problems [Volume 24, Issue 6, 2017, Pages 3181-3192]
Aliakbari, Farhang Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
Alipour, Majid Assessment of labor productivity in construction projects using system dynamic approach [Volume 24, Issue 6, 2017, Pages 2684-2695]
Alizad, Arash Numerical Simulation of non-Newtonian Nanofluids Flow in Passive Injection Micromixers Using Mixture Model [Volume 24, Issue 1, 2017, Pages 211-222]
Alizadeh, Mostafa Phenol Removal from Aqueous Solution by Adsorption Process: Study of The Nanoparticles Performance Prepared from Alo vera and Mesquite (Prosopis) Leaves [Volume 24, Issue 6, 2017, Pages 3041-3052]
ALIZADEH, MAHDI A SEMANTIC ACCESS CONTROL MODEL FOR ONLINE SOCIAL NETWORKS [Volume 24, Issue 6, 2017, Pages 3101-3116]
ALVER, Veysel An alternative boom design and welding technique to minimize energy consumption during boom production [Volume 24, Issue 6, 2017, Pages 2856-2863]
Ameri, Ehsan A Multi-Objective Multi-State Degraded System to Optimize Maintenance/Repair Costs and System Availability [Volume 24, Issue 1, 2017, Pages 355-363]
Amezquita-Sanchez, J.P. Current efforts for prediction and assessment of natural disasters: Earthquakes, tsunamis, volcanic eruptions, hurricanes, tornados, and floods [Volume 24, Issue 6, 2017, Pages 2645-2664]
Amini, Negar The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
Amini, Yasser Piezoelectric energy harvesting from vertical piezoelectric beams in the horizontal fluid flows [Volume 24, Issue 5, 2017, Pages 2396-2405]
AMINI, MORTEZA A SEMANTIC ACCESS CONTROL MODEL FOR ONLINE SOCIAL NETWORKS [Volume 24, Issue 6, 2017, Pages 3101-3116]
Amiri, Amirhossein Maximum Multivariate Exponentially Weighted Moving Average and Maximum Multivariate Cumulative Sum Control Charts for Simultaneous Monitoring of Mean and Variability of Multivariate Multiple Linear Regression Profiles [Volume 24, Issue 5, 2017, Pages 2605-2622]
Amjadzadeh, M. An Innovative Emotion Assessment using Physiological Signals Based on The Combination Mechanism [Volume 24, Issue 6, 2017, Pages 3157-3170]
Anbarjafari, Gholamreza A Robust Proportion-Preserving Composite Objective Function for Scale-Invariant Multi-Objective Optimization [Volume 24, Issue 6, 2017, Pages 2977-2991]
Angooraj Taghavi, S. Optimization of ethylene oxychlorination fluidized-bed reactor using Differential Evolution (DE) method [Volume 24, Issue 3, 2017, Pages 1253-1263]
Ani, F. Che Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
A. Niaki, S.T. A bi-objective model to optimize reliability and cost of k-out-of-n series-parallel systems with tri-state components [Volume 24, Issue 3, 2017, Pages 1585-1602]
Ansari, R. On the oscillatory frequency of the carbon nanotube-based nanothermometers [Volume 24, Issue 3, 2017, Pages 1615-1625]
Ansarian, Hossein Computational Investigation of Vortex Breakdown over a Pitching Delta Wing at Supersonic Speeds [Volume 24, Issue 6, 2017, Pages 2915-2928]
Ansari-Asl, K. An Innovative Emotion Assessment using Physiological Signals Based on The Combination Mechanism [Volume 24, Issue 6, 2017, Pages 3157-3170]
A Nurul, M. A new approach for cold extrusion process: Dimples indentation on sliding contact surface and palm oil as an alternative lubricant [Volume 24, Issue 6, 2017, Pages 2875-2886]
Arab Kermani, Mojtaba Integrated Optimization of Guidance and Control Parameters in a Dual Spin Flying Vehicle [Volume 24, Issue 5, 2017, Pages 2473-2489]
Arehpanahi, M. Optimization of magnetic devices using Surface Current Method (SCM) [Volume 24, Issue 3, 2017, Pages 1345-1352]
Arghavani, J. Experimental and numerical study on the effect of aluminum foil wrapping on penetration resistance of ceramic tiles [Volume 24, Issue 3, 2017, Pages 1126-1135]
Arifin, N. M. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
Arjang, F. A reliable implicit difference scheme for treatments of fourth-order fractional sub-diffusion equation [Volume 24, Issue 3, 2017, Pages 1100-1107]
Arvani, Maedeh Graphene oxide/SnO2 Nanocomposite as Sensing Material for Breathalyzers: Selective Detection of Ethanol in the presence of Automotive CO and Hydrocarbons Emissions [Volume 24, Issue 6, 2017, Pages 3033-3040]
Arzani, H. Optimum two-dimensional crack modeling in discrete least-squares meshless method by charged system search algorithm [Volume 24, Issue 1, 2017, Pages 143-152]
Asghari, A. Evaluation of sensitivity of CBFs for types of Bracing and story numbers [Volume 24, Issue 1, 2017, Pages 40-52]
Asghari, A.-H. Effects of particle shape and size distribution on particle size-dependent flow strengthening in metal matrix composites [Volume 24, Issue 3, 2017, Pages 1091-1099]
Asghari Shivaee, Hossein Ultraviolet and Visible Upconversion Emissions in Er3+-Yb3+ Doped Titanium Dioxide Nanopowder under the 980 nm Laser Diode Excitation [Volume 24, Issue 6, 2017, Pages 3500-3504]
Asghari Shivaee, Hossein The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
Ashrafzadeh, Farah Poincaré Section based Biomarkers of Hemispheric Asymmetry, applied to Autism Spectrum Disorder [Volume 24, Issue 6, 2017, Pages 3257-3267]
Asil Gharebaghi, Saeed Modal Analysis of Two-Dimensional Beams Using Parallel Finite Element Method [Volume 24, Issue 6, 2017, Pages 2762-2775]
Asim, M. An integrated approach of quality for polymer composite manufacturing validated and optimized through Taguchi method [Volume 24, Issue 4, 2017, Pages 1985-1995]
Askari, Ehsan Ali A capacitated bike sharing location-allocation problem under demand uncertainty using sample average approximation: A greedy Genetic-Particle Swarm Optimization algorithm [Volume 24, Issue 5, 2017, Pages 2567-2580]
Ataei, Sh. Dynamic load testing of a railway masonry arch bridge: A case study of Babak Bridge [Volume 24, Issue 4, 2017, Pages 1834-1842]
Ates, H. Effect of deep sub-zero treatment on mechanical properties of AA5XXX aluminum plates adjoined by MIG welding technique [Volume 24, Issue 4, 2017, Pages 1950-1957]
Auchar Zardari, M. Long-term flexural behavior of reinforced baked clay beams [Volume 24, Issue 3, 2017, Pages 877-883]
Avaz Pour, P. Enhancing power system transient stability using optimal unified power flow controller based on Lyapunov control strategy [Volume 24, Issue 3, 2017, Pages 1458-1466]
Ayar, Arif Toxic Effects of Chronic Feeding with Food Azo Dyes on Drosophila melanogaster Oregon R [Volume 24, Issue 6, 2017, Pages 3081-3086]
Aydin, A. An experimental study of the seismic behavior of infilled RC frames with opening [Volume 24, Issue 5, 2017, Pages 2271-2282]
AYTAC, Ayse INVESTIGATION OF THE EFFECTS OF CARBONIC AGENT AND NANOCLAY ON THE PROPERTIES OF THE POLYLACTIC ACID BASED NANOCOMPOSITES [Volume 24, Issue 6, 2017, Pages 3074-3080]
Ayubirad, Mohammad sadegh Comparison of artificial neural network and coupled simulated annealing based least square support vector regression models for prediction of compressive strength of high-performance concrete [Volume 24, Issue 2, 2017, Pages 487-496]
Ayubi Rad, Mostafa Comparison of artificial neural network and coupled simulated annealing based least square support vector regression models for prediction of compressive strength of high-performance concrete [Volume 24, Issue 2, 2017, Pages 487-496]
Azadeh, M. A. Credibility-Based Fuzzy Mathematical Programming for Bi-Objective Capacitated Partial Facility Interdiction with Fortification and Demand Outsourcing Model [Volume 24, Issue 2, 2017, Pages 778-793]
Azadi, M Group classification of the time-fractional Kaup-Kupershmidt equation [Volume 24, Issue 1, 2017, Pages 302-307]
Azadi Hematabadi, Ahmad A New Solution Approach for Supply Function Equilibrium-based Bidding Strategy in Electricity Markets [Volume 24, Issue 6, 2017, Pages 3231-3246]
Azadi Moghaddam, M. Simultaneous Optimization of Joint Edge Geometry and Process Parameters in Gas Metal Arc Welding Using Integrated ANN - PSO Approach [Volume 24, Issue 1, 2017, Pages 260-273]
Azarhoushang, Bahman Conditioning of vitrified and resin bond CBN grinding wheels using a picosecond laser [Volume 24, Issue 5, 2017, Pages 2369-2378]
Azari, Esmaeel Decreasing the Crane Working Time in Retrieving the Containers from a Bay [Volume 24, Issue 1, 2017, Pages 309-318]
Azhir, E. Synthesis and antimicrobial properties of ZnO/PVA, CuO/PVA, and TiO2/PVA nanocomposites [Volume 24, Issue 3, 2017, Pages 1717-1723]
Azid, I.A. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
Azimi, B. Evaluation of sensitivity of CBFs for types of Bracing and story numbers [Volume 24, Issue 1, 2017, Pages 40-52]
Azimi, P. Solving the redundancy allocation problem of k-out-of-n with non-exponential repairable components using optimization via simulation approach [Volume 24, Issue 3, 2017, Pages 1547-1560]
Azimi, Parham An ANN-based optimization model for facility layout problem using simulation Technique [Volume 24, Issue 1, 2017, Pages 364-377]
Azizipour, Mohammad An Adaptive Relaxed Cellular Automata Method for Reliability-Based Hydropower Operation of Reservoirs [Volume 24, Issue 5, 2017, Pages 2294-2306]
Azli, Y. Surface modification of biomaterial embedded with pits using die sinker machine [Volume 24, Issue 4, 2017, Pages 1901-1911]
Bachok, N. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
Badkoubeh, A. Fundamental period of vibration for seismic design of concrete shear wall buildings [Volume 24, Issue 3, 2017, Pages 1010-1016]
Baghani, M. Developing a finite element beam theory for nanocomposite shape memory polymers with application to sustained release of drugs [Volume 24, Issue 1, 2017, Pages 249-259]
Baghbanian, Abdolvahab Phenol Removal from Aqueous Solution by Adsorption Process: Study of The Nanoparticles Performance Prepared from Alo vera and Mesquite (Prosopis) Leaves [Volume 24, Issue 6, 2017, Pages 3041-3052]
Bagheri Esfe, Hamed Effects of non-equilibrium condensation on aerodynamics of the flow field in a steam turbine cascade [Volume 24, Issue 2, 2017, Pages 624-634]
Bagheripour, M. H. Seismic Wave Scatter Study in Valleys Using Coupled 2D Finite Element Approach and Absorbing Boundaries [Volume 24, Issue 1, 2017, Pages 110-120]
Bahadori, M.N. Economic and Environmental Evaluations of Different Operation Alternatives of an Aquifer Thermal Energy Storage in Tehran, Iran [Volume 24, Issue 2, 2017, Pages 610-623]
Bahar, Arash Vertical vibration control of suspension bridges subjected to earthquake by Semi-active MR dampers [Volume 24, Issue 2, 2017, Pages 439-451]
Baharvand, Hossein Mechanical reinforcement of urinary bladder matrix by electrospun polycaprolactone nanofibers [Volume 24, Issue 6, 2017, Pages 3476-3480]
Baheri, Sima Numerical Simulation of non-Newtonian Nanofluids Flow in Passive Injection Micromixers Using Mixture Model [Volume 24, Issue 1, 2017, Pages 211-222]
Baheri, Z. Numerical modelling of the mechanical behaviour of steel brace modified by CFRP sheet [Volume 24, Issue 4, 2017, Pages 1883-1888]
Balan, Poo Hydro-magnetic mixed convection in a lid-driven cavity with partially thermally active walls [Volume 24, Issue 1, 2017, Pages 153-163]
Balic, J. A new optimization algorithm for parameter optimization of nano-finishing processes [Volume 24, Issue 2, 2017, Pages 868-875]
Banazadeh, M. Probabilistic seismic hazard analysis using reliability methods [Volume 24, Issue 3, 2017, Pages 933-941]
Baniassadi, M. Developing a finite element beam theory for nanocomposite shape memory polymers with application to sustained release of drugs [Volume 24, Issue 1, 2017, Pages 249-259]
Baniyaghoob, Sahar H2S Removal Using ZnO/SBA-3: New Synthesis Route and Optimization of Process Parameters [Volume 24, Issue 6, 2017, Pages 3064-3073]
Bararnia, Majid Ground Motion Prediction Equation for Inelastic Spectral Displacement in Iran [Volume 24, Issue 1, 2017, Pages 164-182]
Bardania, Hassan Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
Baricco, Marcello The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
Bashiri, Mahdi A capacitated bike sharing location-allocation problem under demand uncertainty using sample average approximation: A greedy Genetic-Particle Swarm Optimization algorithm [Volume 24, Issue 5, 2017, Pages 2567-2580]
Bayat, R. Unsteady impulsive oblique stagnation-point flow impinging axisymmetrically on a vertical circular cylinder with mixed convection heat transfer [Volume 24, Issue 4, 2017, Pages 1966-1974]
Bayati, B. n-pentane isomerization over Pt-Al promoted sulfated zirconia nanocatalyst [Volume 24, Issue 3, 2017, Pages 1264-1271]
Behnia, S. Spintronics in Nano scales: An approach from DNA spin polarization [Volume 24, Issue 6, 2017, Pages 3448-3451]
Behzadipour, S. Hand acceleration measurement by Kinect for rehabilitation applications [Volume 24, Issue 1, 2017, Pages 191-201]
Beiraghi, H. Effect of record scaling on the behavior of reinforced concrete core-wall buildings subjected to near-fault and far-fault earthquakes [Volume 24, Issue 3, 2017, Pages 884-899]
Benzaoui, Ahmed COMPARATIVE STUDY OF THE EFFECT OF TWO TYPE OF RIBS ON THERMAL PERFORMANCE OF SOLAR AIR HEATERS [Volume 24, Issue 5, 2017, Pages 2418-2428]
Bhuvaneswari, M. Hydro-magnetic mixed convection in a lid-driven cavity with partially thermally active walls [Volume 24, Issue 1, 2017, Pages 153-163]
Bhuvaneswari, M. Chemical reaction, soret and dufour effects on MHD mixed convection stagnation point flow with radiation and slip condition [Volume 24, Issue 2, 2017, Pages 698-706]
Bilik, J. Kinetics of reduction and oxidation reactions during pyrometallurgical metal extraction [Volume 24, Issue 4, 2017, Pages 2009-2018]
Binesh, Seyed Mohammad Adaptive mesh-free lower bound limit analysis using non-linear programming [Volume 24, Issue 6, 2017, Pages 2793-2802]
Bingol, B.N. Data Envelopment Analysis (DEA) Approach for Making the Bid/No Bid Decision: A Case Study in a Turkish Construction Contracting Company [Volume 24, Issue 2, 2017, Pages 497-511]
Bin Shafie, Sharidan MHD boundary layer flow of an incompressible upper convected Maxwell fluid by Optimal Homotopy Asymptotic Method. [Volume 24, Issue 1, 2017, Pages 202-210]
Biswas, A. Application of Petrov-Galerkin finite element method to shallow water waves model: Modified Korteweg-de Vries equation [Volume 24, Issue 3, 2017, Pages 1148-1159]
Bonakdari, H. Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel [Volume 24, Issue 3, 2017, Pages 1000-1009]
Bong, Ch. Hin Joo Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel [Volume 24, Issue 3, 2017, Pages 1000-1009]
Borhani, S. Development of a Cournot-oligopoly model for competition of multi-product supply chains under government supervision [Volume 24, Issue 3, 2017, Pages 1519-1532]
Borozova, S. Kinetics of reduction and oxidation reactions during pyrometallurgical metal extraction [Volume 24, Issue 4, 2017, Pages 2009-2018]
Boulemtafes - Boukadoum, Amel COMPARATIVE STUDY OF THE EFFECT OF TWO TYPE OF RIBS ON THERMAL PERFORMANCE OF SOLAR AIR HEATERS [Volume 24, Issue 5, 2017, Pages 2418-2428]
Bozorgmehry Boozarjomehry, R. Characterization of three-phase flow in porous media using the ensemble Kalman filter [Volume 24, Issue 3, 2017, Pages 1281-1301]
B. Rahimi, A. Unsteady impulsive oblique stagnation-point flow impinging axisymmetrically on a vertical circular cylinder with mixed convection heat transfer [Volume 24, Issue 4, 2017, Pages 1966-1974]
C
Cárdenas-Barrón, Leopoldo Eduardo Two-warehouse inventory model for deteriorating items with imperfect quality under the conditions of permissible delay in payments [Volume 24, Issue 1, 2017, Pages 390-412]
Cárdenas-Barrón, Leopoldo Eduardo A simple solution procedure to solve the multi-delivery policy into economic production lot size problem with partial rework [Volume 24, Issue 5, 2017, Pages 2640-2644]
Canpolat, Fethullah Effect Of Curing Conditions On Strength And Durability Of High-Performance Concrete [Volume 24, Issue 2, 2017, Pages 576-583]
Castellero, Alberto The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
Celegato, Federica The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
Ceribasi, G. Application of trend analysis and artificial neural networks methods: The case of Sakarya River [Volume 24, Issue 3, 2017, Pages 993-999]
Chakraborty, S. Seismic performance of reinforced concrete building in Guwahati city, northeast India [Volume 24, Issue 4, 2017, Pages 1821-1833]
Chambari, A. Solving the redundancy allocation problem of k-out-of-n with non-exponential repairable components using optimization via simulation approach [Volume 24, Issue 3, 2017, Pages 1547-1560]
Chang, Shuenn-Yih A One-Parameter Controlled Dissipative Unconditionally Stable Explicit Algorithm for Time History Analysis [Volume 24, Issue 5, 2017, Pages 2307-2319]
Charchi Aghdam, N. n-pentane isomerization over Pt-Al promoted sulfated zirconia nanocatalyst [Volume 24, Issue 3, 2017, Pages 1264-1271]
Charlang Kiani, Kiarash The Application of Suction and Blowing in Performance Improvement of Transonic Airfoils with Shock Control Bump [Volume 24, Issue 1, 2017, Pages 274-292]
Chatrsimab, S. Using integrated method to rank the power system contingency [Volume 24, Issue 3, 2017, Pages 1373-1383]
Chen, Lin Multidimensional Knapsack Problem Based on Uncertain Measure [Volume 24, Issue 5, 2017, Pages 2527-2539]
Chen, Long Research on the inventory control of the remanufacturing reverse logistics based on the quantitative examination [Volume 24, Issue 2, 2017, Pages 741-750]
Chen, Ping-Shun Multi-Objective Optimization of Green Supply Chain Network Designs for Transportation Mode Selection [Volume 24, Issue 6, 2017, Pages 3355-3370]
Cheng, Li Multidimensional Knapsack Problem Based on Uncertain Measure [Volume 24, Issue 5, 2017, Pages 2527-2539]
Cheraghi, I. Design of an innovative construction model for supply chain management by measuring agility and cost of quality: An empirical study [Volume 24, Issue 5, 2017, Pages 2515-2526]
Christiansen, Gunna Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
Chung, Kun-Jen A simple solution procedure to solve the multi-delivery policy into economic production lot size problem with partial rework [Volume 24, Issue 5, 2017, Pages 2640-2644]
COBAN, Meral INVESTIGATION OF THE EFFECTS OF CARBONIC AGENT AND NANOCLAY ON THE PROPERTIES OF THE POLYLACTIC ACID BASED NANOCOMPOSITES [Volume 24, Issue 6, 2017, Pages 3074-3080]
Costa, A. M. Wind turbines design corrections for next Galicia climatic conditions [Volume 24, Issue 3, 2017, Pages 926-932]
Criado-Aldeanueva, Francisco On the solution of a contact problem for a rhombus weakened with a full-strength hole [Volume 24, Issue 1, 2017, Pages 183-190]
D
Daaou Nedjari, Hafida COMPARATIVE STUDY OF THE EFFECT OF TWO TYPE OF RIBS ON THERMAL PERFORMANCE OF SOLAR AIR HEATERS [Volume 24, Issue 5, 2017, Pages 2418-2428]
Dalcalı, Adem Optimum Pole Arc Offset in Permanent Magnet Synchronous Generators for Obtaining Least Voltage Harmonics [Volume 24, Issue 6, 2017, Pages 3223-3230]
Daliri, M. On the oscillatory frequency of the carbon nanotube-based nanothermometers [Volume 24, Issue 3, 2017, Pages 1615-1625]
Dalvand, A. Increasing the flexural capacity of geopolymer concrete beams using partially deflection hardening cement-based layers: Numerical study [Volume 24, Issue 6, 2017, Pages 2832-2844]
Daneshmand, Morteza A Robust Proportion-Preserving Composite Objective Function for Scale-Invariant Multi-Objective Optimization [Volume 24, Issue 6, 2017, Pages 2977-2991]
DaneshPajooh, Hosein High frequency vibrations of quartz crystals subject to initial thermo-mechanical bias [Volume 24, Issue 2, 2017, Pages 684-697]
Darijani, Hossein On a Conceptual Method for the Extraction of Wind Energy Using Airfoil and Linear Generator [Volume 24, Issue 2, 2017, Pages 597-609]
Das, Satyajit Family of harmonic aggregation operators under inuitionistic fuzzy environment [Volume 24, Issue 6, 2017, Pages 3308-3323]
Dauren, Omar Integrated system for the use of solar energy in the animal farm [Volume 24, Issue 6, 2017, Pages 3213-3222]
Davoudpour, H. A Benders decomposition algorithm for multi-factory scheduling problem with batch delivery [Volume 24, Issue 2, 2017, Pages 823-833]
Dehghani, M. Detecting shoreline changes in Chabahar Bay by processing satellite images [Volume 24, Issue 4, 2017, Pages 1802-1809]
Dehghani Tafti, Marzieh Synthesis of quinoxalines promoted by eco-friendly nano-kaoline/BF3/Fe3O4 nano-catalyst under grinding condition [Volume 24, Issue 6, 2017, Pages 3014-3021]
Denisov, E. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]
Derakhshi, M. Terahertz Plasmonic Switch Based on Periodic Array of Graphene/Silicon [Volume 24, Issue 6, 2017, Pages 3452-3457]
Dezfoulian, Hamid Reza A new model to optimize the knowledge exchange in industrial cluster: A case study of Semnan plaster production industrial cluster [Volume 24, Issue 2, 2017, Pages 834-846]
Dhinakaran, G. Effect of Ultra-Fine SiO2 and Metakaolin on High Strength Concrete in Aggressive Environment [Volume 24, Issue 1, 2017, Pages 1-10]
Didari, Hamid Investigating the viscoelastic fluid behavior in hollow fiber membrane fabrication process using Giesekus' model [Volume 24, Issue 6, 2017, Pages 3053-3063]
Ding, N. Effects of edge rate of the designed line markings on the following time headway [Volume 24, Issue 4, 2017, Pages 1770-1778]
Dogan, E. Application of trend analysis and artificial neural networks methods: The case of Sakarya River [Volume 24, Issue 3, 2017, Pages 993-999]
Dolatabadi, R. Developing a finite element beam theory for nanocomposite shape memory polymers with application to sustained release of drugs [Volume 24, Issue 1, 2017, Pages 249-259]
Dolati, Abolghasem Investigation of carbon phase evolutions in titanium nitride-carbon nanocomposites prepared in supercritical benzene with respect to their lithium storage capacity [Volume 24, Issue 6, 2017, Pages 3481-3490]
Dolati, Abolghasem The effect of current density on microstructural homogeneity, hardness, fracture toughness and electrochemical behavior of electrodeposited Cu-0.5Co/WC nano-composite coating [Volume 24, Issue 6, 2017, Pages 3505-3511]
Doniavi, A. Development of Supply Chain Strategy in Iranian Automotive Industry Based on System Dynamics and Game Theory [Volume 24, Issue 6, 2017, Pages 3345-3354]
Doostmohammadi, A. Copper-doped and copper-free bioactive glass nanopowders cytotoxicity and antibacterial activity assessment [Volume 24, Issue 3, 2017, Pages 1706-1716]
Durali, Mohammad Multilevel optimization of profile of splitter blades in the impeller of a centrifugal compressor [Volume 24, Issue 2, 2017, Pages 707-714]
E
Ebrahimi, Mohsen Axisymmetric active lateral earth pressure for c-Φ soils using the stress characteristics method [Volume 24, Issue 5, 2017, Pages 2332-2345]
Ebtehaj, I. Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel [Volume 24, Issue 3, 2017, Pages 1000-1009]
E. Estekanchi, H. Application of damage spectra as seismic intensity measures in endurance time method for steel moment-resisting frames [Volume 24, Issue 1, 2017, Pages 53-64]
E. Estekanchi, Homayoon Assessment of Collapse Modes in Reinforced Concrete Frames Considering Record-to-Record and Modeling Uncertainties [Volume 24, Issue 5, 2017, Pages 2213-2226]
Eftekhari-Sis, Bagher Pyridylmethylaminoacetic acid functionalized Fe3O4 magnetic nanorods as an efficient catalyst for the synthesis of 2-aminochromene and 2-aminopyran derivatives [Volume 24, Issue 6, 2017, Pages 3022-3031]
Eghbali, Mahdi Reliable seismic collapse assessment of short-period structures using new proxies for ground motion record selection [Volume 24, Issue 5, 2017, Pages 2283-2293]
Eghlidos, T. A lattice-based changeable threshold multi-secret sharing scheme and its application to threshold cryptography [Volume 24, Issue 3, 2017, Pages 1448-1457]
Ehsani, M. Experimental study on behavior of soil-waste tire mixtures [Volume 24, Issue 1, 2017, Pages 65-71]
Ejtemaei, M. n-pentane isomerization over Pt-Al promoted sulfated zirconia nanocatalyst [Volume 24, Issue 3, 2017, Pages 1264-1271]
Elaraby, Ahmed A generalized entropy-based two-phase threshold algorithm for noisy medical image edge detection [Volume 24, Issue 6, 2017, Pages 3247-3256]
Emami, F. On the improvement of steel plate shear wall behavior, using energy absorbent element [Volume 24, Issue 1, 2017, Pages 11-18]
Emami, Saeed A fuzzy dynamic multi-objective, multi-item model by considering customer satisfaction in supply chain [Volume 24, Issue 5, 2017, Pages 2623-2639]
Emdad, Homayoon Piezoelectric energy harvesting from vertical piezoelectric beams in the horizontal fluid flows [Volume 24, Issue 5, 2017, Pages 2396-2405]
Erdem, Ayhan Applying a multi sensor system to predict and simulate the tool wear using of artificial neural networks [Volume 24, Issue 6, 2017, Pages 2864-2874]
Erni, Daniel Comparison between Periodicity and Randomness from an Effective Refractive Index Point of View; Applicable to thin-film Solar Cells [Volume 24, Issue 6, 2017, Pages 3536-3541]
Eshghi, Kourosh Train Timetabling on double track and multiple station capacity railway with useful upper and lower bounds [Volume 24, Issue 6, 2017, Pages 3324-3344]
Eshraghi, J. Light Oil – Gas Two-Phase Flow Pattern Identification in Different Pipe Orientations: An Experimental Approach [Volume 24, Issue 5, 2017, Pages 2445-2456]
Eskandari, Hamidreza Decreasing the Crane Working Time in Retrieving the Containers from a Bay [Volume 24, Issue 1, 2017, Pages 309-318]
Eskandarzadeh, Mohammad Fatigue behavior of nano-grained pure copper processed by equal channel angular rolling [Volume 24, Issue 2, 2017, Pages 656-661]
Eslami, A. Study of pile behavior by improvement of confining soils using frustum confining vessel [Volume 24, Issue 4, 2017, Pages 1874-1882]
Eslami, J. Numerical simulation of the effect of visitor's movement on bacteria-carrying particles distribution in hospital isolation room [Volume 24, Issue 3, 2017, Pages 1160-1170]
Eslami Saray, Mohammad Ali Airflow patterns in a 3D model of the human acinus [Volume 24, Issue 5, 2017, Pages 2379-2386]
Eslampanah Seyedi, Hadieh Alsadat Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
Esmaeili, M. Discrete mass modeling for dynamic response of buildings in the vicinity of railway tracks due to train-induced ground vibrations [Volume 24, Issue 4, 2017, Pages 1922-1939]
ESMAEILI, SHAHROKH THE NUMERICAL SOLUTION OF THE BAGLEY-TORVIK EQUATION BY EXPONENTIAL INTEGRATORS [Volume 24, Issue 6, 2017, Pages 2941-2951]
Esmaili, Z. Degradation of furfural in contaminated water by titanium and iron oxide nanophotocatalysts based on the natural zeolite (clinoptilolite) [Volume 24, Issue 3, 2017, Pages 1221-1229]
Estekanchi, H.E. Seismic performance evaluation of jacket-type offshore platforms using endurance time method considering soil-pile-superstructure interaction [Volume 24, Issue 4, 2017, Pages 1843-1854]
Etefagh, R. Synthesis and antimicrobial properties of ZnO/PVA, CuO/PVA, and TiO2/PVA nanocomposites [Volume 24, Issue 3, 2017, Pages 1717-1723]
Evdokimov, Yu.K. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]
F
Fadaie, Sina Stability of Supported Vertical Cuts in Granular Matters in Presence of the Seepage Flow by a Semi-Analytical Approach [Volume 24, Issue 2, 2017, Pages 537-550]
Fakhraei, J. Chaotic behaviors of a ground vehicle oscillating system with passengers [Volume 24, Issue 3, 2017, Pages 1051-1068]
Fallahnezhad, M.S. Economic design of cumulative count of conforming control charts based on average number of inspected items [Volume 24, Issue 1, 2017, Pages 330-341]
Fallah Sanami, Sahar A new mathematical model for integrated production planning and scheduling problem in capacitated flexible flow shop with sequence-dependent setups [Volume 24, Issue 5, 2017, Pages 2501-2514]
Farahani, M. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
Farahani, M. Experimental Investigation of Shock Waves Formation and Development Process in Transonic Flow [Volume 24, Issue 5, 2017, Pages 2457-2465]
Faramarzi, V. Petahertz-frequency plasmons in graphene nanopore and their application to nanoparticle sensing [Volume 24, Issue 3, 2017, Pages 1669-1677]
Faramarzi, Vahid A biosensor based on plasmonic wave excitation with diffractive grating structure [Volume 24, Issue 6, 2017, Pages 3441-3447]
Farbod, F. Enhanced electro-oxidation of urea based on nickel nanoparticle decorated reduced graphene oxide/PEDOT:PSS composite [Volume 24, Issue 3, 2017, Pages 1678-1685]
Farhadian, M. Degradation of furfural in contaminated water by titanium and iron oxide nanophotocatalysts based on the natural zeolite (clinoptilolite) [Volume 24, Issue 3, 2017, Pages 1221-1229]
Farid, M. Piezoelectric energy harvesting from vertical piezoelectric beams in the horizontal fluid flows [Volume 24, Issue 5, 2017, Pages 2396-2405]
Farrahi, G.H. A new technique of the irst and second limits" for wagon maintenance in railway tracks consisting of sharp curves based on the empirical study of wheel wear [Volume 24, Issue 3, 2017, Pages 1171-1180]
Farrokhi-Asl, Hamed Integrated Dynamic Cell Formation-Production Planning: A New Mathematical Model [Volume 24, Issue 5, 2017, Pages 2550-2566]
Fasihi, M. The Effect of Outer Diameter of Multi-Walled Carbon Nanotubes on Fracture Behavior of Epoxy Adhesives [Volume 24, Issue 6, 2017, Pages 2952-2962]
Fatemi Ghomi, S.M.T. Model and optimization of the multi-objective single-buyer multi-vendor integrated inventory problem with multiple quantity discounts [Volume 24, Issue 2, 2017, Pages 856-867]
Fatemi Ghomi, S.M.T. A novel deterministic model for simultaneous weekly assignment and scheduling decision-making in operating theaters [Volume 24, Issue 4, 2017, Pages 2035-2049]
Fathi, D. Terahertz Plasmonic Switch Based on Periodic Array of Graphene/Silicon [Volume 24, Issue 6, 2017, Pages 3452-3457]
Fathi, D. Graphene Based Nano Bio-sensor: Sensitivity Improvement [Volume 24, Issue 6, 2017, Pages 3531-3535]
Fathizadeh, S. Spintronics in Nano scales: An approach from DNA spin polarization [Volume 24, Issue 6, 2017, Pages 3448-3451]
Fattahi, M. Experimental study of rheological properties of aphron based drilling Fluids and their effects on formation damage [Volume 24, Issue 3, 2017, Pages 1241-1252]
Fazel Zarand, M.H. A prototype-based classification using extended imperialist competitive algorithm [Volume 24, Issue 4, 2017, Pages 2062-2081]
Fazel Zarandi, Mohammad Hossein Generalized Heat Transfer and Entropy Generation of Stratified Air-Water Flow in Entrance of a Mini-channel [Volume 24, Issue 5, 2017, Pages 2407-2417]
Fazli Besheli, Shabnam A fuzzy dynamic multi-objective, multi-item model by considering customer satisfaction in supply chain [Volume 24, Issue 5, 2017, Pages 2623-2639]
FEDGHOUCHE, Ferhat Cost optimum design of doubly reinforced high strength concrete T-beams [Volume 24, Issue 2, 2017, Pages 476-486]
Feizi, M.M. Discrete mass modeling for dynamic response of buildings in the vicinity of railway tracks due to train-induced ground vibrations [Volume 24, Issue 4, 2017, Pages 1922-1939]
Feizi Chekab, Mohammad A. Ferrofluid appendages: Ferrofluid vortex container - A numerical investigation of free surface shape and vortex flow in ferrofluids for different relative densities [Volume 24, Issue 6, 2017, Pages 2929-2940]
Fiza, Mehreen MHD boundary layer flow of an incompressible upper convected Maxwell fluid by Optimal Homotopy Asymptotic Method. [Volume 24, Issue 1, 2017, Pages 202-210]
Fotouhi, B. Petahertz-frequency plasmons in graphene nanopore and their application to nanoparticle sensing [Volume 24, Issue 3, 2017, Pages 1669-1677]
Fotouhi, Bashir A biosensor based on plasmonic wave excitation with diffractive grating structure [Volume 24, Issue 6, 2017, Pages 3441-3447]
G
Ganji, F. Minimizing maximum earliness in single-machine scheduling with flexible maintenance time [Volume 24, Issue 4, 2017, Pages 2082-2094]
Garcia-Bustelo, E.J. Wind turbines design corrections for next Galicia climatic conditions [Volume 24, Issue 3, 2017, Pages 926-932]
Garg, Harish Some improved interactive aggregation operators under interval-valued intuitionistic fuzzy environment and its application to decision making process [Volume 24, Issue 5, 2017, Pages 2581-2604]
Genç, Sıdıka Toxic Effects of Chronic Feeding with Food Azo Dyes on Drosophila melanogaster Oregon R [Volume 24, Issue 6, 2017, Pages 3081-3086]
Ghadimi, Parviz Numerical Assessment of turbulence effect on Forces, Spray parameters, and secondary impact in wedge water entry problem using k-ε method [Volume 24, Issue 1, 2017, Pages 223-236]
Ghadimi, Parviz Ferrofluid appendages: Ferrofluid vortex container - A numerical investigation of free surface shape and vortex flow in ferrofluids for different relative densities [Volume 24, Issue 6, 2017, Pages 2929-2940]
Ghaebi, Hadi Economic and Environmental Evaluations of Different Operation Alternatives of an Aquifer Thermal Energy Storage in Tehran, Iran [Volume 24, Issue 2, 2017, Pages 610-623]
Ghaemian, M. Multi-criteria optimization of concrete arch dams [Volume 24, Issue 4, 2017, Pages 1810-1820]
Ghaemian, Mohsen Stability analysis of arch dam abutments due to seismic loading [Volume 24, Issue 2, 2017, Pages 467-475]
Ghafari, Amir Mohammad Mechanical reinforcement of urinary bladder matrix by electrospun polycaprolactone nanofibers [Volume 24, Issue 6, 2017, Pages 3476-3480]
Ghaffarpasand, O. Effect of alternating magnetic field on unsteady MHD mixed convection and entropy generation of ferro fluid in a linearly heated two-sided cavity [Volume 24, Issue 3, 2017, Pages 1108-1125]
Ghaffarpasand, O. Natural convection and entropy generation of ultrafine atmospheric aerosols in the presence of hydrodynamic partial slip and thermal radiation due to solar energy [Volume 24, Issue 3, 2017, Pages 1686-1705]
Ghahremani, Amirreza Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
Ghalebsaz Jeddi, B. Minimizing maximum earliness in single-machine scheduling with flexible maintenance time [Volume 24, Issue 4, 2017, Pages 2082-2094]
Ghanbari Alamooti, E. Stability analysis of dry sandy slopes adjacent to dynamic compaction process [Volume 24, Issue 1, 2017, Pages 82-95]
Ghane Golmohamadi, Farzin A biosensor based on plasmonic wave excitation with diffractive grating structure [Volume 24, Issue 6, 2017, Pages 3441-3447]
Ghanian, Mohammad Hossein Mechanical reinforcement of urinary bladder matrix by electrospun polycaprolactone nanofibers [Volume 24, Issue 6, 2017, Pages 3476-3480]
Gharraei, Reza Numerical Simulation of non-Newtonian Nanofluids Flow in Passive Injection Micromixers Using Mixture Model [Volume 24, Issue 1, 2017, Pages 211-222]
Ghaseminejad, Vali Evaluation of behavior of bucket foundations under pure loading [Volume 24, Issue 6, 2017, Pages 2803-2816]
Ghashghaei, Reza Maximum Multivariate Exponentially Weighted Moving Average and Maximum Multivariate Cumulative Sum Control Charts for Simultaneous Monitoring of Mean and Variability of Multivariate Multiple Linear Regression Profiles [Volume 24, Issue 5, 2017, Pages 2605-2622]
Ghayour, M. Chaotic behaviors of a ground vehicle oscillating system with passengers [Volume 24, Issue 3, 2017, Pages 1051-1068]
Ghenaatian, H.R. Structural and electronic properties of alumaphosphinine complexes with metal ions: A theoretical study [Volume 24, Issue 3, 2017, Pages 1181-1188]
Ghezavati, J. Various types of ceramics used in radome: A review [Volume 24, Issue 3, 2017, Pages 1136-1147]
Ghiyasvand, Mehdi Adjusting an Infeasible Network by Minimizing the Sum of the Violation Costs [Volume 24, Issue 1, 2017, Pages 319-329]
Ghodrati Amiri, Gholamreza Reliable seismic collapse assessment of short-period structures using new proxies for ground motion record selection [Volume 24, Issue 5, 2017, Pages 2283-2293]
Ghodrati Amiri, Golamreza Ground Motion Prediction Equation for Inelastic Spectral Displacement in Iran [Volume 24, Issue 1, 2017, Pages 164-182]
Ghodsian, Masoud Experimental study on relation between scour and complex 3D flow field [Volume 24, Issue 6, 2017, Pages 2696-2711]
Ghorbani, M. pH-Responsive Nanostructured Polyaniline Capsules for Self-Healing Corrosion Protection: The Influence of Capsule Concentration [Volume 24, Issue 6, 2017, Pages 3512-3520]
Ghorbani, Mohammad Investigation of carbon phase evolutions in titanium nitride-carbon nanocomposites prepared in supercritical benzene with respect to their lithium storage capacity [Volume 24, Issue 6, 2017, Pages 3481-3490]
Ghorbanian, Ali A Multi-Objective Multi-State Degraded System to Optimize Maintenance/Repair Costs and System Availability [Volume 24, Issue 1, 2017, Pages 355-363]
Ghoreyshi, A.A. Enhancement of hydrogen storage on multi-walled carbon nanotube through KOH activation and nickel nanoparticle deposition [Volume 24, Issue 3, 2017, Pages 1230-1240]
Ghosh, S. Seismic performance of reinforced concrete building in Guwahati city, northeast India [Volume 24, Issue 4, 2017, Pages 1821-1833]
Ghotbi, A. Dynamic behavior of large-diameter piles with considering liquefaction under clay layer [Volume 24, Issue 6, 2017, Pages 2665-2683]
Ghotbi, Cyrus The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
Goh, Joan New High Accuracy Non-polynomial Spline Group Explicit Iterative Method for Two Dimensional Elliptic Boundary Value Problems [Volume 24, Issue 6, 2017, Pages 3181-3192]
Goharimanesh, Masoud Improving Lateral Dynamics of Vehicle Using Direct Yaw Moment Controller Based on Quantitative Feedback Theory [Volume 24, Issue 2, 2017, Pages 662-672]
Golafshani, A.A. Seismic performance evaluation of jacket-type offshore platforms using endurance time method considering soil-pile-superstructure interaction [Volume 24, Issue 4, 2017, Pages 1843-1854]
Golbafian, V. Economic design of cumulative count of conforming control charts based on average number of inspected items [Volume 24, Issue 1, 2017, Pages 330-341]
Golestani, A. Effect of wind tunnel wall porosity on the flow around an oscillating airfoil at transonic speeds [Volume 24, Issue 3, 2017, Pages 1069-1076]
Golkhoo, Farzaneh Modeling Labor Productivity in Construction Projects using Hybrid SD-DES Approach [Volume 24, Issue 6, 2017, Pages 2752-2761]
Golmezerji, R. Simultaneous Optimization of Joint Edge Geometry and Process Parameters in Gas Metal Arc Welding Using Integrated ANN - PSO Approach [Volume 24, Issue 1, 2017, Pages 260-273]
Golozar, Matin Theoretical and computational investigation of optimal wall shear stress in bifurcations: a generalization of Murray’s law [Volume 24, Issue 5, 2017, Pages 2387-2395]
Golpîra, Hêriş A multi-objective multi-echelon green supply chain network design problem with risk-averse retailers in an uncertain environment [Volume 24, Issue 1, 2017, Pages 413-423]
Golshokooh, S. Investigating the effect of hybrid silica nanoparticles- copolymer on increasing oil recovery in a three dimensional porous media [Volume 24, Issue 6, 2017, Pages 3466-3475]
Golzar, F.G. Stress Analyses in Single Deck and Double Deck Floating Roofs Subjected to Earthquake Ground Motions [Volume 24, Issue 2, 2017, Pages 727-739]
Gong, Dah-Chuan Multi-Objective Optimization of Green Supply Chain Network Designs for Transportation Mode Selection [Volume 24, Issue 6, 2017, Pages 3355-3370]
Gonzalez-Garcia, Y. pH-Responsive Nanostructured Polyaniline Capsules for Self-Healing Corrosion Protection: The Influence of Capsule Concentration [Volume 24, Issue 6, 2017, Pages 3512-3520]
Guha, Debashree Family of harmonic aggregation operators under inuitionistic fuzzy environment [Volume 24, Issue 6, 2017, Pages 3308-3323]
H
Habibi, Asiyeh Fatigue behavior of nano-grained pure copper processed by equal channel angular rolling [Volume 24, Issue 2, 2017, Pages 656-661]
Haddadpour, H. Impact crushing behavior of foam-filled paraboloid shells using numerical and experimental methods [Volume 24, Issue 4, 2017, Pages 1912-1921]
Hadianfard, M.A. Strength and elastic moduli of a concrete bridge using advanced nondestructive techniques [Volume 24, Issue 3, 2017, Pages 942-952]
Hadidoolabi, Mostafa Computational Investigation of Vortex Breakdown over a Pitching Delta Wing at Supersonic Speeds [Volume 24, Issue 6, 2017, Pages 2915-2928]
Hadji Molana, Mohammad Optimizing Reliability and Cost of system for Aggregate Production Planning in Supply Chain [Volume 24, Issue 6, 2017, Pages 3394-3408]
Hafezalkotob, A. Development of a Cournot-oligopoly model for competition of multi-product supply chains under government supervision [Volume 24, Issue 3, 2017, Pages 1519-1532]
Haghi, M. A novel deterministic model for simultaneous weekly assignment and scheduling decision-making in operating theaters [Volume 24, Issue 4, 2017, Pages 2035-2049]
Haghiabi, A.H. Estimation of scour downstream of a ski-jump bucket using the multivariate adaptive regression splines [Volume 24, Issue 4, 2017, Pages 1789-1801]
Hajiani Boushehrian, Alireza Investigating the experimental behavior of the reinforcements effect on the railway traverse under the dynamic load [Volume 24, Issue 5, 2017, Pages 2253-2261]
Hajilouy Benisi, Ali Multilevel optimization of profile of splitter blades in the impeller of a centrifugal compressor [Volume 24, Issue 2, 2017, Pages 707-714]
Hajinezhad, Ahmad Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
Hajipour, V. A prototype-based classification using extended imperialist competitive algorithm [Volume 24, Issue 4, 2017, Pages 2062-2081]
Hajizadeh, Sajad Evaluation of planing craft maneuverability using mathematical modeling under the action of the rudder [Volume 24, Issue 1, 2017, Pages 293-301]
Haleh, Hassan Energy-conscious dynamic sequencing method for dual command cycle unit-load multiple-rack automated storage and retrieval systems [Volume 24, Issue 6, 2017, Pages 3371-3393]
Hallaj, Diako Credibility-Based Fuzzy Mathematical Programming for Bi-Objective Capacitated Partial Facility Interdiction with Fortification and Demand Outsourcing Model [Volume 24, Issue 2, 2017, Pages 778-793]
Halvaei Niasar, A. A novel time varying dynamic modeling for hysteresis motor [Volume 24, Issue 3, 2017, Pages 1395-1409]
Hamedi, Mohsen High frequency vibrations of quartz crystals subject to initial thermo-mechanical bias [Volume 24, Issue 2, 2017, Pages 684-697]
Hamidi, A. Stability analysis of dry sandy slopes adjacent to dynamic compaction process [Volume 24, Issue 1, 2017, Pages 82-95]
Hanafizadeh, P. Light Oil – Gas Two-Phase Flow Pattern Identification in Different Pipe Orientations: An Experimental Approach [Volume 24, Issue 5, 2017, Pages 2445-2456]
Hanumanaika, Rajanaika Synthesis of Nα-protected formamides from amino acids using MgO nano catalyst: Study of molecular docking and antibacterial activity [Volume 24, Issue 6, 2017, Pages 3002-3013]
Haqverdi, Shiva Pyridylmethylaminoacetic acid functionalized Fe3O4 magnetic nanorods as an efficient catalyst for the synthesis of 2-aminochromene and 2-aminopyran derivatives [Volume 24, Issue 6, 2017, Pages 3022-3031]
Hasani, H. Seismic performance evaluation of jacket-type offshore platforms using endurance time method considering soil-pile-superstructure interaction [Volume 24, Issue 4, 2017, Pages 1843-1854]
Hashemi, S. DiReT: An effective discriminative dimensionality reduction approach for multi-source transfer learning [Volume 24, Issue 3, 2017, Pages 1303-1311]
Hashemi Golpayegani, Mohammad Reza Poincaré Section based Biomarkers of Hemispheric Asymmetry, applied to Autism Spectrum Disorder [Volume 24, Issue 6, 2017, Pages 3257-3267]
Hassani, Nemat Ground Motion Prediction Equation for Inelastic Spectral Displacement in Iran [Volume 24, Issue 1, 2017, Pages 164-182]
Hassannayebi, Erfan An integrated train scheduling and infrastructure development model in railway networks [Volume 24, Issue 6, 2017, Pages 3409-3422]
Hassanzadeh Azami, Roozbeh Ultraviolet and Visible Upconversion Emissions in Er3+-Yb3+ Doped Titanium Dioxide Nanopowder under the 980 nm Laser Diode Excitation [Volume 24, Issue 6, 2017, Pages 3500-3504]
Hatami, F. Numerical modelling of the mechanical behaviour of steel brace modified by CFRP sheet [Volume 24, Issue 4, 2017, Pages 1883-1888]
Hatefi, Mohammad Ali Developing Column Generation Approach to Solve the Rectangular Two-dimensional Single Knapsack Problem [Volume 24, Issue 6, 2017, Pages 3287-3296]
HAZER, Seda INVESTIGATION OF THE EFFECTS OF CARBONIC AGENT AND NANOCLAY ON THE PROPERTIES OF THE POLYLACTIC ACID BASED NANOCOMPOSITES [Volume 24, Issue 6, 2017, Pages 3074-3080]
Hebrani, Paria Poincaré Section based Biomarkers of Hemispheric Asymmetry, applied to Autism Spectrum Disorder [Volume 24, Issue 6, 2017, Pages 3257-3267]
Heidari, M. Experimental study of rheological properties of aphron based drilling Fluids and their effects on formation damage [Volume 24, Issue 3, 2017, Pages 1241-1252]
Heidarzadeh, S. Development of Supply Chain Strategy in Iranian Automotive Industry Based on System Dynamics and Game Theory [Volume 24, Issue 6, 2017, Pages 3345-3354]
Hekmatzadeh, M. Investigating the effect of hybrid silica nanoparticles- copolymer on increasing oil recovery in a three dimensional porous media [Volume 24, Issue 6, 2017, Pages 3466-3475]
Hemmati, M. Solving the redundancy allocation problem of k-out-of-n with non-exponential repairable components using optimization via simulation approach [Volume 24, Issue 3, 2017, Pages 1547-1560]
Hesam, E. Optimization of magnetic devices using Surface Current Method (SCM) [Volume 24, Issue 3, 2017, Pages 1345-1352]
Heydari, Soroush Modal Analysis of Two-Dimensional Beams Using Parallel Finite Element Method [Volume 24, Issue 6, 2017, Pages 2762-2775]
Hojjati, S. H. The objective design of triangular bucket for dam's spillway using Non-dominated Sorting Genetic Algorithm II: NSGA-II [Volume 24, Issue 1, 2017, Pages 19-27]
Hojjati, S.H. The objective design of triangular bucket for dam's spillway using Non-dominated Sorting Genetic Algorithm II: NSGA-II [Volume 24, Issue 1, 2017, Pages 19-27]
Hooshangi-Tabrizi, P. A novel deterministic model for simultaneous weekly assignment and scheduling decision-making in operating theaters [Volume 24, Issue 4, 2017, Pages 2035-2049]
Hoseinzadeh, M.R. An Anisotropic Multi-plane Elastic-Damage Model with Axial and Shear Damage and Its Application to Concrete Behavior [Volume 24, Issue 5, 2017, Pages 2202-2212]
Hosseini, A. Enhancement of hydrogen storage on multi-walled carbon nanotube through KOH activation and nickel nanoparticle deposition [Volume 24, Issue 3, 2017, Pages 1230-1240]
Hosseini, A.S. Synthesis and antimicrobial properties of ZnO/PVA, CuO/PVA, and TiO2/PVA nanocomposites [Volume 24, Issue 3, 2017, Pages 1717-1723]
Hosseini, Mir Saber Time difference of arrival estimation of sound source using Cross Correlation and modified maximum likelihood weighting function [Volume 24, Issue 6, 2017, Pages 3268-3279]
Hosseini, S.A.A. Impact crushing behavior of foam-filled paraboloid shells using numerical and experimental methods [Volume 24, Issue 4, 2017, Pages 1912-1921]
Hosseini, S.A.H. An analytical solution for bending, buckling, and free vibration of FG nanobeam lying on Winkler-Pasternak elastic foundation using different nonlocal higher order shear deformation beam theories [Volume 24, Issue 3, 2017, Pages 1635-1653]
Hosseini, Sayed Jalil Simulating FRP Debonding From Concrete Surface in FRP Strengthened RC Beams: A Case Study [Volume 24, Issue 2, 2017, Pages 452-466]
Hosseini-Moghadam, M. Selection and scaling of spectrum-compatible ground motion records using hybrid coded genetic algorithms [Volume 24, Issue 3, 2017, Pages 910-925]
Hosseini-Toudeshky, Hossein A modified model for stability analysis of narrow-width NEMS tweezers: Corrections due to surface layer, scale dependency and force distributions [Volume 24, Issue 2, 2017, Pages 673-683]
Hosseinzadeh, L. Enhanced electro-oxidation of urea based on nickel nanoparticle decorated reduced graphene oxide/PEDOT:PSS composite [Volume 24, Issue 3, 2017, Pages 1678-1685]
Hosseinzadeh, M. On the oscillatory frequency of the carbon nanotube-based nanothermometers [Volume 24, Issue 3, 2017, Pages 1615-1625]
Huang, Z. Assessment of change in acoustic wave velocity of compacted expansive soil through experiments [Volume 24, Issue 1, 2017, Pages 136-142]
I
Ilchi Ghazaan, M. A new meta-heuristic algorithm: vibrating particles system [Volume 24, Issue 2, 2017, Pages 551-566]
Isa, S. S. P. M. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
Islam, Saeed MHD boundary layer flow of an incompressible upper convected Maxwell fluid by Optimal Homotopy Asymptotic Method. [Volume 24, Issue 1, 2017, Pages 202-210]
J
Jaberi, A. Experimental Investigation of Shock Waves Formation and Development Process in Transonic Flow [Volume 24, Issue 5, 2017, Pages 2457-2465]
Jafari, Hossein Group classification of the time-fractional Kaup-Kupershmidt equation [Volume 24, Issue 1, 2017, Pages 302-307]
Jafari, H.R. Sustainable supply chain design with water environmental impacts and justice-oriented employment considerations: A case study in textile industry [Volume 24, Issue 4, 2017, Pages 2119-2137]
Jafari, Mojtaba Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
Jafari, S. Particle flow simulation in a channel with symmetric protuberances using combination of lattice Boltzmann and smoothed profile methods [Volume 24, Issue 4, 2017, Pages 1940-1949]
Jafari Mansoorian, Hossein Phenol Removal from Aqueous Solution by Adsorption Process: Study of The Nanoparticles Performance Prepared from Alo vera and Mesquite (Prosopis) Leaves [Volume 24, Issue 6, 2017, Pages 3041-3052]
Jaggi, Chandra K. Two-warehouse inventory model for deteriorating items with imperfect quality under the conditions of permissible delay in payments [Volume 24, Issue 1, 2017, Pages 390-412]
Jahanbakhshi, S. Characterization of three-phase flow in porous media using the ensemble Kalman filter [Volume 24, Issue 3, 2017, Pages 1281-1301]
Jahangirian, A. An Optimum Neural Network for Evolutionary Aerodynamic Shape Design [Volume 24, Issue 5, 2017, Pages 2490-2500]
Jahanshahi Javaran, E. Particle flow simulation in a channel with symmetric protuberances using combination of lattice Boltzmann and smoothed profile methods [Volume 24, Issue 4, 2017, Pages 1940-1949]
Jahanshah Rad, Z. S. An Investigation on Effects of Applied Magnetic Field during Zn Vacuum Thermal Evaporation on ZnO Nanostructures [Volume 24, Issue 6, 2017, Pages 3526-3530]
Jahromi, M.H.M.A. A new mathematical model for a scheduling problem of dynamic machine-tool selection and operation allocation in a flexible manufacturing system: A modified evolutionary algorithm [Volume 24, Issue 2, 2017, Pages 765-777]
Jalali, Mandana Comparison between Periodicity and Randomness from an Effective Refractive Index Point of View; Applicable to thin-film Solar Cells [Volume 24, Issue 6, 2017, Pages 3536-3541]
Jalar, A. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
JALILI, RASOOL A SEMANTIC ACCESS CONTROL MODEL FOR ONLINE SOCIAL NETWORKS [Volume 24, Issue 6, 2017, Pages 3101-3116]
Jamili, A. Simultaneous Train Rescheduling through Cancelling, Delaying and Re-Ordering Policies: Three-Phase Solution Method with Guaranteed Optimality [Volume 24, Issue 1, 2017, Pages 121-135]
JAVADI, SEYYED AHMAD A SEMANTIC ACCESS CONTROL MODEL FOR ONLINE SOCIAL NETWORKS [Volume 24, Issue 6, 2017, Pages 3101-3116]
Javed, K. Recognizing traffic signs using flexible Discrete Cosine Transform (DCT) grid [Volume 24, Issue 3, 2017, Pages 1384-1394]
Jia, Y. A projection-based approach to intuitionistic fuzzy group decision making [Volume 24, Issue 3, 2017, Pages 1505-1518]
Jiao, N. Effects of edge rate of the designed line markings on the following time headway [Volume 24, Issue 4, 2017, Pages 1770-1778]
Johari, A. Reliability analysis of foundation settlement by stochastic response surface and random finite element method [Volume 24, Issue 6, 2017, Pages 2741-2751]
Jolai, F. Model and optimization of the multi-objective single-buyer multi-vendor integrated inventory problem with multiple quantity discounts [Volume 24, Issue 2, 2017, Pages 856-867]
Jolai, F. A robust optimization approach for an inventory problem with emergency ordering and product substitution in an uncertain environment: A case study in pharmaceutical industry [Volume 24, Issue 3, 2017, Pages 1533-1546]
Jursova, S. Kinetics of reduction and oxidation reactions during pyrometallurgical metal extraction [Volume 24, Issue 4, 2017, Pages 2009-2018]
K
Kabir, Mohammad Zaman Effects of shear deformation on Mechanical and thermo-mechanical nonlinear stability of FGM shallow spherical shells subjected to uniform external pressure [Volume 24, Issue 2, 2017, Pages 584-596]
Kaczmarek, Kurt A. The Portable Neuromodulation Stimulator (PoNS) for Neurorehabilitation [Volume 24, Issue 6, 2017, Pages 3171-3180]
Kadkhoda, N Group classification of the time-fractional Kaup-Kupershmidt equation [Volume 24, Issue 1, 2017, Pages 302-307]
Ka fi, M.A. Effect of record scaling on the behavior of reinforced concrete core-wall buildings subjected to near-fault and far-fault earthquakes [Volume 24, Issue 3, 2017, Pages 884-899]
Kalyoncuoglu, S. F. Fatigue life prediction of the modified asphalt mixtures with ANFIS modeling [Volume 24, Issue 1, 2017, Pages 72-81]
Kamali, Amir Model and optimization of the multi-objective single-buyer multi-vendor integrated inventory problem with multiple quantity discounts [Volume 24, Issue 2, 2017, Pages 856-867]
Kanani, A. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
Kang, C.W. Human errors incorporation in work-in-process group manufacturing system [Volume 24, Issue 4, 2017, Pages 2050-2061]
KAPLAN, Yusuf Alper Determination of Weibull Parameters by Different Numerical Methods and Analysis of Wind Power Density in Osmaniye, Turkey [Volume 24, Issue 6, 2017, Pages 3204-3212]
Karakoc, S.B.G. Application of Petrov-Galerkin finite element method to shallow water waves model: Modified Korteweg-de Vries equation [Volume 24, Issue 3, 2017, Pages 1148-1159]
Karami, S. Selection and scaling of spectrum-compatible ground motion records using hybrid coded genetic algorithms [Volume 24, Issue 3, 2017, Pages 910-925]
Karbasi, S. Evaluation of physical and mechanical properties of B-tri-calcium phosphate/poly-3-hydroxybutyrate nanocomposite scaffold for bone tissue engineering application [Volume 24, Issue 3, 2017, Pages 1654-1668]
Karbati Asl, A. Effects of petrochemical wastes incinerator ash powder instead of Portland cement on the properties of concrete [Volume 24, Issue 3, 2017, Pages 1017-1026]
Karbati Asl, R. Effects of petrochemical wastes incinerator ash powder instead of Portland cement on the properties of concrete [Volume 24, Issue 3, 2017, Pages 1017-1026]
Kargar, M. Effect of reinforcement geometry on the performance of a reduced-scale strip footing model supported on geocell-reinforced sand [Volume 24, Issue 1, 2017, Pages 96-109]
Karimi, A.H. Study of pile behavior by improvement of confining soils using frustum confining vessel [Volume 24, Issue 4, 2017, Pages 1874-1882]
Karimi, Behrooz A new model to optimize the knowledge exchange in industrial cluster: A case study of Semnan plaster production industrial cluster [Volume 24, Issue 2, 2017, Pages 834-846]
Karimi, N. A Benders decomposition algorithm for multi-factory scheduling problem with batch delivery [Volume 24, Issue 2, 2017, Pages 823-833]
Karimi-Sabet, Javad The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
Karimzadeh, A. Effect of size dependency on in-plane vibration of circular micro-rings [Volume 24, Issue 4, 2017, Pages 1996-2008]
Karthikeyan, B. Effect of Ultra-Fine SiO2 and Metakaolin on High Strength Concrete in Aggressive Environment [Volume 24, Issue 1, 2017, Pages 1-10]
Kaveh, A. Optimum two-dimensional crack modeling in discrete least-squares meshless method by charged system search algorithm [Volume 24, Issue 1, 2017, Pages 143-152]
Kaveh, A. A new meta-heuristic algorithm: vibrating particles system [Volume 24, Issue 2, 2017, Pages 551-566]
Kaveh, A. A new meta-heuristic algorithm: vibrating particles system [Volume 24, Issue 2, 2017, Pages 551-566]
Kaveh, A. Assessment of labor productivity in construction projects using system dynamic approach [Volume 24, Issue 6, 2017, Pages 2684-2695]
Kazemi, M.R. Effiiently computing the smallest axis-parallel squares spanning all colors [Volume 24, Issue 3, 2017, Pages 1325-1334]
Kazemi, Seyed Mohamad Mehdi An Integrated Pricing and Inventory Model for Deteriorating Products in a two stage supply chain under Replacement and Shortage [Volume 24, Issue 1, 2017, Pages 342-354]
Keikha, H. On the assessment of a new steel bolted flush end-plate beam splice connection [Volume 24, Issue 4, 2017, Pages 1735-1750]
Keivani, M. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
Kermani, Mohammad Jafar Effects of non-equilibrium condensation on aerodynamics of the flow field in a steam turbine cascade [Volume 24, Issue 2, 2017, Pages 624-634]
Keshavarz, Amin Axisymmetric active lateral earth pressure for c-Φ soils using the stress characteristics method [Volume 24, Issue 5, 2017, Pages 2332-2345]
Ketabchi, Mostafa Fatigue behavior of nano-grained pure copper processed by equal channel angular rolling [Volume 24, Issue 2, 2017, Pages 656-661]
Keyhanian, Sina Integrated Dynamic Cell Formation-Production Planning: A New Mathematical Model [Volume 24, Issue 5, 2017, Pages 2550-2566]
Khademi, M.H. Optimization of ethylene oxychlorination fluidized-bed reactor using Differential Evolution (DE) method [Volume 24, Issue 3, 2017, Pages 1253-1263]
Khakzad, M. The Effect of Outer Diameter of Multi-Walled Carbon Nanotubes on Fracture Behavior of Epoxy Adhesives [Volume 24, Issue 6, 2017, Pages 2952-2962]
Khaleghpanah, Shila The effect of current density on microstructural homogeneity, hardness, fracture toughness and electrochemical behavior of electrodeposited Cu-0.5Co/WC nano-composite coating [Volume 24, Issue 6, 2017, Pages 3505-3511]
Khan, Ilyas MHD boundary layer flow of an incompressible upper convected Maxwell fluid by Optimal Homotopy Asymptotic Method. [Volume 24, Issue 1, 2017, Pages 202-210]
Khan, Yasir Magnetohydrodynamic flow of linear visco-elastic fluid model above a shrinking/stretching sheet: A series solution [Volume 24, Issue 5, 2017, Pages 2466-2472]
Khanlo, H.M. Chaotic behaviors of a ground vehicle oscillating system with passengers [Volume 24, Issue 3, 2017, Pages 1051-1068]
Khanmohammadi, Reza Assessment of labor productivity in construction projects using system dynamic approach [Volume 24, Issue 6, 2017, Pages 2684-2695]
Khanteimouri, P. Effiiently computing the smallest axis-parallel squares spanning all colors [Volume 24, Issue 3, 2017, Pages 1325-1334]
Khanzadi, M. Assessment of labor productivity in construction projects using system dynamic approach [Volume 24, Issue 6, 2017, Pages 2684-2695]
Khazaei, J. Study of pile behavior by improvement of confining soils using frustum confining vessel [Volume 24, Issue 4, 2017, Pages 1874-1882]
Kheyroddin, A. Effect of record scaling on the behavior of reinforced concrete core-wall buildings subjected to near-fault and far-fault earthquakes [Volume 24, Issue 3, 2017, Pages 884-899]
Khodadadi, Abbas Ali Graphene oxide/SnO2 Nanocomposite as Sensing Material for Breathalyzers: Selective Detection of Ethanol in the presence of Automotive CO and Hydrocarbons Emissions [Volume 24, Issue 6, 2017, Pages 3033-3040]
Khojasteh, A. Three-dimensional axisymmetric responses of exponentially graded transversely isotropic tri-materials under interfacial loading [Volume 24, Issue 3, 2017, Pages 966-978]
Khor, C.Y. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
Khoramishad, H. The Effect of Outer Diameter of Multi-Walled Carbon Nanotubes on Fracture Behavior of Epoxy Adhesives [Volume 24, Issue 6, 2017, Pages 2952-2962]
Khorram, E. Fuzzy multi-objective optimization of linear functions subject to max-arithmetic mean relational inequality constraints [Volume 24, Issue 3, 2017, Pages 1561-1570]
Khoshbin, F. Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel [Volume 24, Issue 3, 2017, Pages 1000-1009]
Kia, M. Probabilistic seismic hazard analysis using reliability methods [Volume 24, Issue 3, 2017, Pages 933-941]
Knutsson, Sven Comparison of three dimensional and two dimensional axisymmetric finite element analyses of a corner section of a tailings dam [Volume 24, Issue 5, 2017, Pages 2320-2331]
Kocamaz, U.E. Application of trend analysis and artificial neural networks methods: The case of Sakarya River [Volume 24, Issue 3, 2017, Pages 993-999]
Kohan, S . Investigating the experimental behavior of the reinforcements effect on the railway traverse under the dynamic load [Volume 24, Issue 5, 2017, Pages 2253-2261]
Kokabi, Reza Credibility-Based Fuzzy Mathematical Programming for Bi-Objective Capacitated Partial Facility Interdiction with Fortification and Demand Outsourcing Model [Volume 24, Issue 2, 2017, Pages 778-793]
Kolahan, F. Simultaneous Optimization of Joint Edge Geometry and Process Parameters in Gas Metal Arc Welding Using Integrated ANN - PSO Approach [Volume 24, Issue 1, 2017, Pages 260-273]
Koochi, Ali A modified model for stability analysis of narrow-width NEMS tweezers: Corrections due to surface layer, scale dependency and force distributions [Volume 24, Issue 2, 2017, Pages 673-683]
Kouchakinejad, F. Fuzzy multi-objective optimization of linear functions subject to max-arithmetic mean relational inequality constraints [Volume 24, Issue 3, 2017, Pages 1561-1570]
Kouchak Yazdi, Z. Comparison and optimization of conjugated linoleic acid production by Lactobacillus plantarum and Lactobacillus plantarum subsp. plantarum [Volume 24, Issue 3, 2017, Pages 1272-1280]
Kouhestani, A. Particle flow simulation in a channel with symmetric protuberances using combination of lattice Boltzmann and smoothed profile methods [Volume 24, Issue 4, 2017, Pages 1940-1949]
Kumar, D. A new algorithm for the computation of the decimals of the inverse [Volume 24, Issue 3, 2017, Pages 1363-1372]
Kumar, Hitender Topological and non-topological soliton solution of the 1 + 3 dimensional Gross-Pitaevskii equation with quadratic potential term [Volume 24, Issue 5, 2017, Pages 2429-2435]
Kunelbayev, Murat Integrated system for the use of solar energy in the animal farm [Volume 24, Issue 6, 2017, Pages 3213-3222]
Lalithamba, Haraluru Shankaraiah Synthesis of Nα-protected formamides from amino acids using MgO nano catalyst: Study of molecular docking and antibacterial activity [Volume 24, Issue 6, 2017, Pages 3002-3013]
Lashkar Ara, A. Enhancing power system transient stability using optimal unified power flow controller based on Lyapunov control strategy [Volume 24, Issue 3, 2017, Pages 1458-1466]
Lee, Muhammad Hisyam New EWMA S2 Control Charts for Monitoring Process Dispersion [Volume 24, Issue 1, 2017, Pages 378-389]
Liu, P.D. Induced generalized interval neutrosophic Shapley hybrid operators and their application in multi-attribute decision making [Volume 24, Issue 4, 2017, Pages 2164-2181]
Liu, W.L. Induced generalized interval neutrosophic Shapley hybrid operators and their application in multi-attribute decision making [Volume 24, Issue 4, 2017, Pages 2164-2181]
Lu, Tzu-Yang Multi-Objective Optimization of Green Supply Chain Network Designs for Transportation Mode Selection [Volume 24, Issue 6, 2017, Pages 3355-3370]
M
Madaah Hosseini, Hamid Reza Ultraviolet and Visible Upconversion Emissions in Er3+-Yb3+ Doped Titanium Dioxide Nanopowder under the 980 nm Laser Diode Excitation [Volume 24, Issue 6, 2017, Pages 3500-3504]
Madaah Hosseini, Hamid Reza The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
Mahadevaiah, Raghavendra Synthesis of Nα-protected formamides from amino acids using MgO nano catalyst: Study of molecular docking and antibacterial activity [Volume 24, Issue 6, 2017, Pages 3002-3013]
Mahmood, T. Performance evaluation of joint monitoring control charts [Volume 24, Issue 4, 2017, Pages 2152-2163]
Mahmoodian, Vahid A new mathematical model for integrated production planning and scheduling problem in capacitated flexible flow shop with sequence-dependent setups [Volume 24, Issue 5, 2017, Pages 2501-2514]
Majdi, M. Graphene Based Nano Bio-sensor: Sensitivity Improvement [Volume 24, Issue 6, 2017, Pages 3531-3535]
Makui, Ahmad A new mathematical model for a scheduling problem of dynamic machine-tool selection and operation allocation in a flexible manufacturing system: A modified evolutionary algorithm [Volume 24, Issue 2, 2017, Pages 765-777]
Malakootian, Mohammad Phenol Removal from Aqueous Solution by Adsorption Process: Study of The Nanoparticles Performance Prepared from Alo vera and Mesquite (Prosopis) Leaves [Volume 24, Issue 6, 2017, Pages 3041-3052]
Maleki-Amin, M.J. Application of damage spectra as seismic intensity measures in endurance time method for steel moment-resisting frames [Volume 24, Issue 1, 2017, Pages 53-64]
Malleswaran, A. Hydro-magnetic mixed convection in a lid-driven cavity with partially thermally active walls [Volume 24, Issue 1, 2017, Pages 153-163]
Manavizadeh, N. Sequencing of mixed models on U-shaped assembly lines by considering effective help policies in make-to-order environment [Volume 24, Issue 3, 2017, Pages 1493-1504]
Manavizadeh, Neda Integrated Dynamic Cell Formation-Production Planning: A New Mathematical Model [Volume 24, Issue 5, 2017, Pages 2550-2566]
Mannan, A. Recognizing traffic signs using flexible Discrete Cosine Transform (DCT) grid [Volume 24, Issue 3, 2017, Pages 1384-1394]
Marandi, F. Integrated production and distribution scheduling for perishable products [Volume 24, Issue 4, 2017, Pages 2105-2118]
Mardan, E. A robust optimization approach for an inventory problem with emergency ordering and product substitution in an uncertain environment: A case study in pharmaceutical industry [Volume 24, Issue 3, 2017, Pages 1533-1546]
Martemianov, S. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]
Marzouk, H. Strength and elastic moduli of a concrete bridge using advanced nondestructive techniques [Volume 24, Issue 3, 2017, Pages 942-952]
Masdari, M. Effect of wind tunnel wall porosity on the flow around an oscillating airfoil at transonic speeds [Volume 24, Issue 3, 2017, Pages 1069-1076]
Mashinchi, M. Fuzzy multi-objective optimization of linear functions subject to max-arithmetic mean relational inequality constraints [Volume 24, Issue 3, 2017, Pages 1561-1570]
Massumi, A. Fundamental period of vibration for seismic design of concrete shear wall buildings [Volume 24, Issue 3, 2017, Pages 1010-1016]
Mastali, M. Increasing the flexural capacity of geopolymer concrete beams using partially deflection hardening cement-based layers: Numerical study [Volume 24, Issue 6, 2017, Pages 2832-2844]
Mastali, M.. Increasing the flexural capacity of geopolymer concrete beams using partially deflection hardening cement-based layers: Numerical study [Volume 24, Issue 6, 2017, Pages 2832-2844]
Masteri-Farahani, M. Preparation of MoO3/CuMoO4 nanoparticles as selective catalyst for olefin epoxidation [Volume 24, Issue 3, 2017, Pages 1203-1208]
Masteri-Farahani, M. Encapsulation of Keggin-type phosphotungstic acid into the mesopores of SBA-16 as a reusable heterogeneous catalyst for the epoxidation of olefins [Volume 24, Issue 6, 2017, Pages 2993-3001]
Mattsson, Hans Comparison of three dimensional and two dimensional axisymmetric finite element analyses of a corner section of a tailings dam [Volume 24, Issue 5, 2017, Pages 2320-2331]
Mazaheri, H. Experimental and numerical study on the effect of aluminum foil wrapping on penetration resistance of ceramic tiles [Volume 24, Issue 3, 2017, Pages 1126-1135]
Mazaheri, Karim The Application of Suction and Blowing in Performance Improvement of Transonic Airfoils with Shock Control Bump [Volume 24, Issue 1, 2017, Pages 274-292]
Mazloum-Ardakani, M. Enhanced electro-oxidation of urea based on nickel nanoparticle decorated reduced graphene oxide/PEDOT:PSS composite [Volume 24, Issue 3, 2017, Pages 1678-1685]
Mehdigholi, Hamid Evaluation of planing craft maneuverability using mathematical modeling under the action of the rudder [Volume 24, Issue 1, 2017, Pages 293-301]
Mehdikhani-Nahrkhalaji, M. Copper-doped and copper-free bioactive glass nanopowders cytotoxicity and antibacterial activity assessment [Volume 24, Issue 3, 2017, Pages 1706-1716]
Mehdizadeh, Esmaeil Optimizing Reliability and Cost of system for Aggregate Production Planning in Supply Chain [Volume 24, Issue 6, 2017, Pages 3394-3408]
Mehraein, Mojtaba Experimental study on relation between scour and complex 3D flow field [Volume 24, Issue 6, 2017, Pages 2696-2711]
Mehrpay, Saeid Strain Rate Effect in the Mesoscopic Modeling of High-Strength Steel Fiber-Reinforced Concrete [Volume 24, Issue 2, 2017, Pages 512-525]
MINAEI, Shahram A High Performance Full-Wave Rectifier Using a Single CCII-, Two Diodes and Two Resistor [Volume 24, Issue 6, 2017, Pages 3280-3286]
Mirghader, Seyed Rasoul Tubular Web RBS Connection to Improve Seismic Behavior of Moment Resisting Steel Frames [Volume 24, Issue 6, 2017, Pages 2726-2740]
Mirhosseini, S. M. Experimental study on behavior of soil-waste tire mixtures [Volume 24, Issue 1, 2017, Pages 65-71]
Miri, A. Dynamic load testing of a railway masonry arch bridge: A case study of Babak Bridge [Volume 24, Issue 4, 2017, Pages 1834-1842]
Mirjalili, Bi Bi Fatemeh Synthesis of quinoxalines promoted by eco-friendly nano-kaoline/BF3/Fe3O4 nano-catalyst under grinding condition [Volume 24, Issue 6, 2017, Pages 3014-3021]
Mir Mohammad Hosseini, S.M. Effect of reinforcement geometry on the performance of a reduced-scale strip footing model supported on geocell-reinforced sand [Volume 24, Issue 1, 2017, Pages 96-109]
Mirzahossein, Hamid An integrated train scheduling and infrastructure development model in railway networks [Volume 24, Issue 6, 2017, Pages 3409-3422]
Mirzazadeh, Abolfazl A queuing location–allocation model for a capacitated health care system [Volume 24, Issue 2, 2017, Pages 751-764]
Mobayen, S. Nonsingular fast terminal sliding-mode stabilizer for a class of uncertain nonlinear systems based on disturbance observer [Volume 24, Issue 3, 2017, Pages 1410-1418]
Mobini, A. Hand acceleration measurement by Kinect for rehabilitation applications [Volume 24, Issue 1, 2017, Pages 191-201]
Modarres, M. Encapsulation of Keggin-type phosphotungstic acid into the mesopores of SBA-16 as a reusable heterogeneous catalyst for the epoxidation of olefins [Volume 24, Issue 6, 2017, Pages 2993-3001]
Moeini, R. Arc based ant colony optimization algorithm for solving sewer network design optimization problem [Volume 24, Issue 3, 2017, Pages 953-965]
Mofid, M. On the improvement of steel plate shear wall behavior, using energy absorbent element [Volume 24, Issue 1, 2017, Pages 11-18]
Mofid, M. On the assessment of a new steel bolted flush end-plate beam splice connection [Volume 24, Issue 4, 2017, Pages 1735-1750]
Mofid, Massood The effect of gusset plate in moment-rotation behavior of double-web angle connection, in braced frames [Volume 24, Issue 6, 2017, Pages 2712-2725]
Moghimi Zand, Mahdi Transient behavior of electrostatically-actuated micro systems considering squeeze film damping and mechanical shock [Volume 24, Issue 6, 2017, Pages 2887-2894]
Mohades, A. Effiiently computing the smallest axis-parallel squares spanning all colors [Volume 24, Issue 3, 2017, Pages 1325-1334]
Mohammad Aliha, Hamide Graphene oxide/SnO2 Nanocomposite as Sensing Material for Breathalyzers: Selective Detection of Ethanol in the presence of Automotive CO and Hydrocarbons Emissions [Volume 24, Issue 6, 2017, Pages 3033-3040]
Mohammadalipour A ski, Roja Effect of Steel and Concrete Coupling Beam on Seismic Behavior of RC Frame Accompanied with Coupled Shear Walls [Volume 24, Issue 5, 2017, Pages 2227-2241]
Mohammad-Beigi, Hossein Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
Mohammadi, M. State of the art on the maximum strength of masonry infilled frames [Volume 24, Issue 3, 2017, Pages 900-909]
Mohammadi, M. Enhancement of hydrogen storage on multi-walled carbon nanotube through KOH activation and nickel nanoparticle deposition [Volume 24, Issue 3, 2017, Pages 1230-1240]
Mohammadi, Mohammad A queuing location–allocation model for a capacitated health care system [Volume 24, Issue 2, 2017, Pages 751-764]
Mohammadi, Mohammad Mostafa High frequency vibrations of quartz crystals subject to initial thermo-mechanical bias [Volume 24, Issue 2, 2017, Pages 684-697]
Mohammadi, Z. Parameter identification of a parametrically excited rate micro-gyroscope using recursive least squares method [Volume 24, Issue 4, 2017, Pages 1889-2019]
Mohammadi, Z. Induced generalized interval neutrosophic Shapley hybrid operators and their application in multi-attribute decision making [Volume 24, Issue 4, 2017, Pages 2164-2181]
Mohammadi Alasti, B. Various types of ceramics used in radome: A review [Volume 24, Issue 3, 2017, Pages 1136-1147]
Mohammadi Vojdan, B. Investigating the seismic behavior of RC shear walls with openings strengthened with FRP sheets using different schemes [Volume 24, Issue 4, 2017, Pages 1855-1865]
Mojarad, Roghayeh Comparison and Analysis of Three Anomaly Correction Methods in Embedded Systems [Volume 24, Issue 6, 2017, Pages 3087-3100]
Mojarrad, M. Detecting shoreline changes in Chabahar Bay by processing satellite images [Volume 24, Issue 4, 2017, Pages 1802-1809]
Mokhtari, H. A computational approach to economic production quantity model for perishable products with backordering shortage and stock-dependent demand [Volume 24, Issue 4, 2017, Pages 2138-2151]
Mokhtari, Hadi A Multi-Objective Multi-State Degraded System to Optimize Maintenance/Repair Costs and System Availability [Volume 24, Issue 1, 2017, Pages 355-363]
Mokhtari, J. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
Mol, J.M.C. pH-Responsive Nanostructured Polyaniline Capsules for Self-Healing Corrosion Protection: The Influence of Capsule Concentration [Volume 24, Issue 6, 2017, Pages 3512-3520]
Monjezi, M. Submicron particle deposition in pulmonary alveoli during cyclic breathing [Volume 24, Issue 4, 2017, Pages 1975-1984]
Moosaie, A. On the orientation dynamics and viscoelasticity of Brownian rigid disklike particles suspended in a shear flow [Volume 24, Issue 3, 2017, Pages 1027-1171]
Moradi, Saeed Modeling Labor Productivity in Construction Projects using Hybrid SD-DES Approach [Volume 24, Issue 6, 2017, Pages 2752-2761]
Moratal, David A generalized entropy-based two-phase threshold algorithm for noisy medical image edge detection [Volume 24, Issue 6, 2017, Pages 3247-3256]
Morshedi, Dina Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
Mortazavi, Yadollah Graphene oxide/SnO2 Nanocomposite as Sensing Material for Breathalyzers: Selective Detection of Ethanol in the presence of Automotive CO and Hydrocarbons Emissions [Volume 24, Issue 6, 2017, Pages 3033-3040]
Moslehi, Gh. Minimizing maximum earliness in single-machine scheduling with flexible maintenance time [Volume 24, Issue 4, 2017, Pages 2082-2094]
Mostafaei, Hasan Stability analysis of arch dam abutments due to seismic loading [Volume 24, Issue 2, 2017, Pages 467-475]
Mostofinejad, Davood Simulating FRP Debonding From Concrete Surface in FRP Strengthened RC Beams: A Case Study [Volume 24, Issue 2, 2017, Pages 452-466]
Mosto nejad, D. Effects of petrochemical wastes incinerator ash powder instead of Portland cement on the properties of concrete [Volume 24, Issue 3, 2017, Pages 1017-1026]
Motiee, F. Preference of Nano porous graphene to Single-Walled Carbon Nanotube (SWCNT) for preparing Silica Nano hybrid Pickering Emulsion for potential Chemical Enhanced Oil Recovery (C-EOR) [Volume 24, Issue 6, 2017, Pages 3491-3499]
Mousavi, S. Abbas The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
Moussavi Torshizi, S.Abolfazl Multilevel optimization of profile of splitter blades in the impeller of a centrifugal compressor [Volume 24, Issue 2, 2017, Pages 707-714]
Mozaffari, Ali Asghar Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
Muhamad Ali, M.Z. Muhamad Ali Selection of variogram model for spatial rainfall mapping using Analytical Hierarchy Procedure (AHP) [Volume 24, Issue 1, 2017, Pages 28-39]
Muhammad, Riaz Dynamic Behaviour of β-Ti-15333 in Ultrasonically Assisted Turning: Experimental and Numerical Analysis [Volume 24, Issue 6, 2017, Pages 2904-2914]
N
Nabavi Niaki, S.A. Enhancing power system transient stability using optimal unified power flow controller based on Lyapunov control strategy [Volume 24, Issue 3, 2017, Pages 1458-1466]
Nabizadeh, H. Effects of moisture on warm mix asphalt containing Sasobit [Volume 24, Issue 4, 2017, Pages 1866-1873]
Naderi, B. Effects of moisture on warm mix asphalt containing Sasobit [Volume 24, Issue 4, 2017, Pages 1866-1873]
Nadgaran, Hamid Comparison between Periodicity and Randomness from an Effective Refractive Index Point of View; Applicable to thin-film Solar Cells [Volume 24, Issue 6, 2017, Pages 3536-3541]
Naghdabadi, R. Experimental and numerical study on the effect of aluminum foil wrapping on penetration resistance of ceramic tiles [Volume 24, Issue 3, 2017, Pages 1126-1135]
Naik, T.R. Effect Of Curing Conditions On Strength And Durability Of High-Performance Concrete [Volume 24, Issue 2, 2017, Pages 576-583]
Naimi-Sadigh, A. A computational approach to economic production quantity model for perishable products with backordering shortage and stock-dependent demand [Volume 24, Issue 4, 2017, Pages 2138-2151]
Najafi, Esmail A multi-objective multi-echelon green supply chain network design problem with risk-averse retailers in an uncertain environment [Volume 24, Issue 1, 2017, Pages 413-423]
Najafi-Jilani, A. Application of Neural Network Models to Improve Prediction Accuracy of Wave Run-up on Antifer Covered Breakwater [Volume 24, Issue 2, 2017, Pages 567-575]
Najafi-Jilani, A. Application of Neural Network Models to Improve Prediction Accuracy of Wave Run-up on Antifer Covered Breakwater [Volume 24, Issue 2, 2017, Pages 567-575]
Naja i, M. Preparation of MoO3/CuMoO4 nanoparticles as selective catalyst for olefin epoxidation [Volume 24, Issue 3, 2017, Pages 1203-1208]
Naji, Mohammad Mechanical reinforcement of urinary bladder matrix by electrospun polycaprolactone nanofibers [Volume 24, Issue 6, 2017, Pages 3476-3480]
Nasirzadeh, Farnad Modeling Labor Productivity in Construction Projects using Hybrid SD-DES Approach [Volume 24, Issue 6, 2017, Pages 2752-2761]
Nassoti, Mahour Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
Nazar, R. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
Nazari, Y. Light Oil – Gas Two-Phase Flow Pattern Identification in Different Pipe Orientations: An Experimental Approach [Volume 24, Issue 5, 2017, Pages 2445-2456]
Nazir, H.Z. Performance evaluation of joint monitoring control charts [Volume 24, Issue 4, 2017, Pages 2152-2163]
Neelakantan, T.R. Optimization of Hedging Rules for Hydropower Reservoir Operation [Volume 24, Issue 5, 2017, Pages 2242-2252]
Neirameh, Ahmad An analytical method for finding exact solitary wave solutions ofthe coupled (2 1)-dimensional Painlevé Burgers equation [Volume 24, Issue 2, 2017, Pages 715-726]
Nejati, Ashkan The Application of Suction and Blowing in Performance Improvement of Transonic Airfoils with Shock Control Bump [Volume 24, Issue 1, 2017, Pages 274-292]
Nemati Keshteli, Ramazan A fuzzy dynamic multi-objective, multi-item model by considering customer satisfaction in supply chain [Volume 24, Issue 5, 2017, Pages 2623-2639]
Nigmatullin, R.R. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]
Nikonam M., Raheleh Effect of Cu2+ ion on Biological Performance of Nanostructured Fluorapatite Doped with Copper [Volume 24, Issue 6, 2017, Pages 2845-2855]
Niranjan, H. Chemical reaction, soret and dufour effects on MHD mixed convection stagnation point flow with radiation and slip condition [Volume 24, Issue 2, 2017, Pages 698-706]
Nobahari, Hadi Integrated Optimization of Guidance and Control Parameters in a Dual Spin Flying Vehicle [Volume 24, Issue 5, 2017, Pages 2473-2489]
Noor, N. F. M. Zero and nonzero normal fluxes of thermal radiative boundary layer flow of nanofluid over a radially stretched surface [Volume 24, Issue 6, 2017, Pages 2895-2903]
Noorpour, M. Effects of petrochemical wastes incinerator ash powder instead of Portland cement on the properties of concrete [Volume 24, Issue 3, 2017, Pages 1017-1026]
Noorpour, S. Effects of petrochemical wastes incinerator ash powder instead of Portland cement on the properties of concrete [Volume 24, Issue 3, 2017, Pages 1017-1026]
Nourmohammadi, Amir Decreasing the Crane Working Time in Retrieving the Containers from a Bay [Volume 24, Issue 1, 2017, Pages 309-318]
Nuraliza, N. Surface modification of biomaterial embedded with pits using die sinker machine [Volume 24, Issue 4, 2017, Pages 1901-1911]
O
Odishelidze, Nana On the solution of a contact problem for a rhombus weakened with a full-strength hole [Volume 24, Issue 1, 2017, Pages 183-190]
Olawale Ajadi, Jimoh NEW MEMORY-TYPE CONTROL CHARTS FOR MONITORING PROCESS MEAN AND DISPERSION [Volume 24, Issue 6, 2017, Pages 3423-3438]
Oliaei, M. Dynamic behavior of large-diameter piles with considering liquefaction under clay layer [Volume 24, Issue 6, 2017, Pages 2665-2683]
Omidvari, M. Sustainable supply chain design with water environmental impacts and justice-oriented employment considerations: A case study in textile industry [Volume 24, Issue 4, 2017, Pages 2119-2137]
Ordoubadi, M. Surface tension simulation of free surface flows using smoothed particle hydrodynamics [Volume 24, Issue 4, 2017, Pages 2019-2033]
Ormann, Linda Comparison of three dimensional and two dimensional axisymmetric finite element analyses of a corner section of a tailings dam [Volume 24, Issue 5, 2017, Pages 2320-2331]
Oroojlooy Jadid, Afshin Train Timetabling on double track and multiple station capacity railway with useful upper and lower bounds [Volume 24, Issue 6, 2017, Pages 3324-3344]
Orosa, J.A. Wind turbines design corrections for next Galicia climatic conditions [Volume 24, Issue 3, 2017, Pages 926-932]
Osei-Aning, R. Monitoring of serially correlated processes using residual control charts [Volume 24, Issue 3, 2017, Pages 1603-1614]
Oshagh, Gh. Numerical modelling of the mechanical behaviour of steel brace modified by CFRP sheet [Volume 24, Issue 4, 2017, Pages 1883-1888]
Othman, F. Selection of variogram model for spatial rainfall mapping using Analytical Hierarchy Procedure (AHP) [Volume 24, Issue 1, 2017, Pages 28-39]
Ozcinar, Cagri A Robust Proportion-Preserving Composite Objective Function for Scale-Invariant Multi-Objective Optimization [Volume 24, Issue 6, 2017, Pages 2977-2991]
P
Panahi, Abbas On a Conceptual Method for the Extraction of Wind Energy Using Airfoil and Linear Generator [Volume 24, Issue 2, 2017, Pages 597-609]
Pilaram, H. A lattice-based changeable threshold multi-secret sharing scheme and its application to threshold cryptography [Volume 24, Issue 3, 2017, Pages 1448-1457]
Pirhady Tavandashti, N. pH-Responsive Nanostructured Polyaniline Capsules for Self-Healing Corrosion Protection: The Influence of Capsule Concentration [Volume 24, Issue 6, 2017, Pages 3512-3520]
Pirzadeh, K. Enhancement of hydrogen storage on multi-walled carbon nanotube through KOH activation and nickel nanoparticle deposition [Volume 24, Issue 3, 2017, Pages 1230-1240]
Pishvaie, M.R. Characterization of three-phase flow in porous media using the ensemble Kalman filter [Volume 24, Issue 3, 2017, Pages 1281-1301]
POLAT, GUL Data Envelopment Analysis (DEA) Approach for Making the Bid/No Bid Decision: A Case Study in a Turkish Construction Contracting Company [Volume 24, Issue 2, 2017, Pages 497-511]
Pop, I. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
Pouraliakbari, Mahsa A queuing location–allocation model for a capacitated health care system [Volume 24, Issue 2, 2017, Pages 751-764]
Pouraminian, M. Multi-criteria optimization of concrete arch dams [Volume 24, Issue 4, 2017, Pages 1810-1820]
Pourkarim Guilani, Pa. A bi-objective model to optimize reliability and cost of k-out-of-n series-parallel systems with tri-state components [Volume 24, Issue 3, 2017, Pages 1585-1602]
Pourkarim Guilani, Pe. A bi-objective model to optimize reliability and cost of k-out-of-n series-parallel systems with tri-state components [Volume 24, Issue 3, 2017, Pages 1585-1602]
Pourzeynali, Saeid Vertical vibration control of suspension bridges subjected to earthquake by Semi-active MR dampers [Volume 24, Issue 2, 2017, Pages 439-451]
Pourzeynali, Saeid Assessment of Collapse Modes in Reinforced Concrete Frames Considering Record-to-Record and Modeling Uncertainties [Volume 24, Issue 5, 2017, Pages 2213-2226]
Pourzeynali, Solmaz Vertical vibration control of suspension bridges subjected to earthquake by Semi-active MR dampers [Volume 24, Issue 2, 2017, Pages 439-451]
P. Prabhakaran, Molamma Impact of electrospun Tecophilic/gelatin scaffold biofunctionalization on proliferation of vascular smooth muscle cells [Volume 24, Issue 6, 2017, Pages 3458-3465]
Pustejovska, P. Kinetics of reduction and oxidation reactions during pyrometallurgical metal extraction [Volume 24, Issue 4, 2017, Pages 2009-2018]
Q
Qandalee, Mohammad H2S Removal Using ZnO/SBA-3: New Synthesis Route and Optimization of Process Parameters [Volume 24, Issue 6, 2017, Pages 3064-3073]
R
Rabbani, M. Sequencing of mixed models on U-shaped assembly lines by considering effective help policies in make-to-order environment [Volume 24, Issue 3, 2017, Pages 1493-1504]
Rabbani, M. A robust optimization approach for an inventory problem with emergency ordering and product substitution in an uncertain environment: A case study in pharmaceutical industry [Volume 24, Issue 3, 2017, Pages 1533-1546]
Rabbani, Masoud Integrated Dynamic Cell Formation-Production Planning: A New Mathematical Model [Volume 24, Issue 5, 2017, Pages 2550-2566]
Rabiee, M. Influence of foundation flexibility on the seismic response of low-to-mid-rise moment-resisting frame buildings [Volume 24, Issue 3, 2017, Pages 979-992]
Rabiei, A. Application of Neural Network Models to Improve Prediction Accuracy of Wave Run-up on Antifer Covered Breakwater [Volume 24, Issue 2, 2017, Pages 567-575]
Rach, R. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
Rafienia, M. Copper-doped and copper-free bioactive glass nanopowders cytotoxicity and antibacterial activity assessment [Volume 24, Issue 3, 2017, Pages 1706-1716]
Rafighi, Mohammad Applying a multi sensor system to predict and simulate the tool wear using of artificial neural networks [Volume 24, Issue 6, 2017, Pages 2864-2874]
Rahaeifard, M. Effect of size dependency on in-plane vibration of circular micro-rings [Volume 24, Issue 4, 2017, Pages 1996-2008]
Rahimi, Y. Design of an innovative construction model for supply chain management by measuring agility and cost of quality: An empirical study [Volume 24, Issue 5, 2017, Pages 2515-2526]
Rahimian, M. Three-dimensional axisymmetric responses of exponentially graded transversely isotropic tri-materials under interfacial loading [Volume 24, Issue 3, 2017, Pages 966-978]
Rahmani, D. A new proactive-reactive approach to hedge against uncertain processing times and unexpected machine failures in the two-machine flow shop scheduling problems [Volume 24, Issue 3, 2017, Pages 1571-1584]
Rahmani, O. An analytical solution for bending, buckling, and free vibration of FG nanobeam lying on Winkler-Pasternak elastic foundation using different nonlocal higher order shear deformation beam theories [Volume 24, Issue 3, 2017, Pages 1635-1653]
Rahnama, M. Particle flow simulation in a channel with symmetric protuberances using combination of lattice Boltzmann and smoothed profile methods [Volume 24, Issue 4, 2017, Pages 1940-1949]
Rai, Dhiraj P. A new optimization algorithm for parameter optimization of nano-finishing processes [Volume 24, Issue 2, 2017, Pages 868-875]
Rajabi-Zeleti, Sareh Mechanical reinforcement of urinary bladder matrix by electrospun polycaprolactone nanofibers [Volume 24, Issue 6, 2017, Pages 3476-3480]
Rakhshandehroo, Gholamreza Uncertainty analysis of open channel flow: stochastic approach to Advection–Diffusion equation [Volume 24, Issue 5, 2017, Pages 2262-2270]
Rakhshandehroo, G. R. Innovative Analytical Solutions to 1, 2 and 3D Water Infiltration into Unsaturated Soils for Initial-Boundary Value Problems [Volume 24, Issue 5, 2017, Pages 2346-2368]
Ramakrishna, Seeram Impact of electrospun Tecophilic/gelatin scaffold biofunctionalization on proliferation of vascular smooth muscle cells [Volume 24, Issue 6, 2017, Pages 3458-3465]
Ramazani S.A., A. Investigating the effect of hybrid silica nanoparticles- copolymer on increasing oil recovery in a three dimensional porous media [Volume 24, Issue 6, 2017, Pages 3466-3475]
Ramezanian, Reza A new mathematical model for integrated production planning and scheduling problem in capacitated flexible flow shop with sequence-dependent setups [Volume 24, Issue 5, 2017, Pages 2501-2514]
Ramly, N. A. Zero and nonzero normal fluxes of thermal radiative boundary layer flow of nanofluid over a radially stretched surface [Volume 24, Issue 6, 2017, Pages 2895-2903]
Ramyar, Mohammad Optimizing Reliability and Cost of system for Aggregate Production Planning in Supply Chain [Volume 24, Issue 6, 2017, Pages 3394-3408]
Ranjbaran, A. Innovative theory for the compliance computation in rotors [Volume 24, Issue 4, 2017, Pages 1779-1788]
Ranjbaran, M. Innovative theory for the compliance computation in rotors [Volume 24, Issue 4, 2017, Pages 1779-1788]
Ranjineh khojasteh, R. Preference of Nano porous graphene to Single-Walled Carbon Nanotube (SWCNT) for preparing Silica Nano hybrid Pickering Emulsion for potential Chemical Enhanced Oil Recovery (C-EOR) [Volume 24, Issue 6, 2017, Pages 3491-3499]
Rao, Congjun Multidimensional Knapsack Problem Based on Uncertain Measure [Volume 24, Issue 5, 2017, Pages 2527-2539]
Rao, R. Venkata A new optimization algorithm for parameter optimization of nano-finishing processes [Volume 24, Issue 2, 2017, Pages 868-875]
Rasekh, S. Adaptive mesh-free lower bound limit analysis using non-linear programming [Volume 24, Issue 6, 2017, Pages 2793-2802]
Rashidi, A.M. Preference of Nano porous graphene to Single-Walled Carbon Nanotube (SWCNT) for preparing Silica Nano hybrid Pickering Emulsion for potential Chemical Enhanced Oil Recovery (C-EOR) [Volume 24, Issue 6, 2017, Pages 3491-3499]
Rashit, Omarov Integrated system for the use of solar energy in the animal farm [Volume 24, Issue 6, 2017, Pages 3213-3222]
Rasouli, Seyedeh Mansooreh A fuzzy dynamic multi-objective, multi-item model by considering customer satisfaction in supply chain [Volume 24, Issue 5, 2017, Pages 2623-2639]
Rastegar, M.A. Detecting shoreline changes in Chabahar Bay by processing satellite images [Volume 24, Issue 4, 2017, Pages 1802-1809]
Razak, D.M. Surface modification of biomaterial embedded with pits using die sinker machine [Volume 24, Issue 4, 2017, Pages 1901-1911]
Razzazi, M. Time complexity of two disjoint simple paths [Volume 24, Issue 3, 2017, Pages 1335-1343]
Refaeinejad, V. An analytical solution for bending, buckling, and free vibration of FG nanobeam lying on Winkler-Pasternak elastic foundation using different nonlocal higher order shear deformation beam theories [Volume 24, Issue 3, 2017, Pages 1635-1653]
Rezaee, Amin A novel approach for automatic model-based test case generation [Volume 24, Issue 6, 2017, Pages 3132-3147]
Rezaei, Shahbaz CMORC: Class-based Multipath On-demand Routing Protocol for Cognitive Radio Networks [Volume 24, Issue 6, 2017, Pages 3117-3131]
Rezaie, Amirhossein Time difference of arrival estimation of sound source using Cross Correlation and modified maximum likelihood weighting function [Volume 24, Issue 6, 2017, Pages 3268-3279]
Rezvani, M.A. Discrete mass modeling for dynamic response of buildings in the vicinity of railway tracks due to train-induced ground vibrations [Volume 24, Issue 4, 2017, Pages 1922-1939]
Riaz, M. On enhanced sensitivity of nonparametric EWMA control charts for process monitoring [Volume 24, Issue 1, 2017, Pages 424-438]
Riaz, M. Monitoring of serially correlated processes using residual control charts [Volume 24, Issue 3, 2017, Pages 1603-1614]
Riaz, M. Performance evaluation of joint monitoring control charts [Volume 24, Issue 4, 2017, Pages 2152-2163]
Riaz, Muhammad New EWMA S2 Control Charts for Monitoring Process Dispersion [Volume 24, Issue 1, 2017, Pages 378-389]
Riaz, Muhammad NEW MEMORY-TYPE CONTROL CHARTS FOR MONITORING PROCESS MEAN AND DISPERSION [Volume 24, Issue 6, 2017, Pages 3423-3438]
Roghanian, E. The combination of TOPSIS method and Dijkstra’s algorithm in multi-attribute routing [Volume 24, Issue 5, 2017, Pages 2540-2549]
Roghanian, Emad Reliability analysis of a warm standby repairable system with two cases of imperfect switching mechanism [Volume 24, Issue 2, 2017, Pages 808-822]
Roozbeh Nia, Ali Energy-conscious dynamic sequencing method for dual command cycle unit-load multiple-rack automated storage and retrieval systems [Volume 24, Issue 6, 2017, Pages 3371-3393]
Roshan, G. Wind turbines design corrections for next Galicia climatic conditions [Volume 24, Issue 3, 2017, Pages 926-932]
Rouhollahi, R. Numerical study on the effect of the concave rigid boundaries on the cavitation intensity [Volume 24, Issue 4, 2017, Pages 1958-1965]
Rowshanzamir, M.A. Evaluation of behavior of bucket foundations under pure loading [Volume 24, Issue 6, 2017, Pages 2803-2816]
Rozati, S.M. Synthesis and antimicrobial properties of ZnO/PVA, CuO/PVA, and TiO2/PVA nanocomposites [Volume 24, Issue 3, 2017, Pages 1717-1723]
R. Rofooei, Fayaz On the Evolutionary Characteristics of the Acceleration Records Generated From Linear Time-Variant Systems [Volume 24, Issue 6, 2017, Pages 2817-2831]
S
Saadat Foumani, M. Hand acceleration measurement by Kinect for rehabilitation applications [Volume 24, Issue 1, 2017, Pages 191-201]
Saadatzi, Mohammad Hossein A Robust Proportion-Preserving Composite Objective Function for Scale-Invariant Multi-Objective Optimization [Volume 24, Issue 6, 2017, Pages 2977-2991]
Saboury, Ali Akbar Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
Sabzi, A. Reliability analysis of foundation settlement by stochastic response surface and random finite element method [Volume 24, Issue 6, 2017, Pages 2741-2751]
Sadegh Amalnick, M. A robust optimization approach for an inventory problem with emergency ordering and product substitution in an uncertain environment: A case study in pharmaceutical industry [Volume 24, Issue 3, 2017, Pages 1533-1546]
Sadeghi, Meisam Reliability analysis of a warm standby repairable system with two cases of imperfect switching mechanism [Volume 24, Issue 2, 2017, Pages 808-822]
Sadeghi Bajestani, Ghasem Poincaré Section based Biomarkers of Hemispheric Asymmetry, applied to Autism Spectrum Disorder [Volume 24, Issue 6, 2017, Pages 3257-3267]
Sadeghi Balkanlou, V. Effects of petrochemical wastes incinerator ash powder instead of Portland cement on the properties of concrete [Volume 24, Issue 3, 2017, Pages 1017-1026]
Sadi-Nezhad, Soheil A multi-objective multi-echelon green supply chain network design problem with risk-averse retailers in an uncertain environment [Volume 24, Issue 1, 2017, Pages 413-423]
Sadrnejad, S.A. An Anisotropic Multi-plane Elastic-Damage Model with Axial and Shear Damage and Its Application to Concrete Behavior [Volume 24, Issue 5, 2017, Pages 2202-2212]
Sadrnezhaad, S.K. Effect of Cu2+ ion on Biological Performance of Nanostructured Fluorapatite Doped with Copper [Volume 24, Issue 6, 2017, Pages 2845-2855]
Saeedi Heydari, M. Various types of ceramics used in radome: A review [Volume 24, Issue 3, 2017, Pages 1136-1147]
Safaei-Ghomi, J. A Flexible one-pot synthesis of pyrazolopyridines catalyzed by Fe3O4@SiO2-SO3H nanocatalyst under microwave irradiation [Volume 24, Issue 3, 2017, Pages 1209-1219]
Saffar - Avval, Majid Generalized Heat Transfer and Entropy Generation of Stratified Air-Water Flow in Entrance of a Mini-channel [Volume 24, Issue 5, 2017, Pages 2407-2417]
Saffar Avval, Majid Effects of non-equilibrium condensation on aerodynamics of the flow field in a steam turbine cascade [Volume 24, Issue 2, 2017, Pages 624-634]
Saffarzadeh, M. Simultaneous Train Rescheduling through Cancelling, Delaying and Re-Ordering Policies: Three-Phase Solution Method with Guaranteed Optimality [Volume 24, Issue 1, 2017, Pages 121-135]
Saghaei, Abbas A new mathematical model for a scheduling problem of dynamic machine-tool selection and operation allocation in a flexible manufacturing system: A modified evolutionary algorithm [Volume 24, Issue 2, 2017, Pages 765-777]
Saghaei, Abbas Energy-conscious dynamic sequencing method for dual command cycle unit-load multiple-rack automated storage and retrieval systems [Volume 24, Issue 6, 2017, Pages 3371-3393]
Saha, P. A new algorithm for the computation of the decimals of the inverse [Volume 24, Issue 3, 2017, Pages 1363-1372]
Saidi, M.H. Economic and Environmental Evaluations of Different Operation Alternatives of an Aquifer Thermal Energy Storage in Tehran, Iran [Volume 24, Issue 2, 2017, Pages 610-623]
Saidi, M.H. Numerical simulation of the effect of visitor's movement on bacteria-carrying particles distribution in hospital isolation room [Volume 24, Issue 3, 2017, Pages 1160-1170]
Saidi, Mohammad Hassan Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
Saidi, Mohammad Said Airflow patterns in a 3D model of the human acinus [Volume 24, Issue 5, 2017, Pages 2379-2386]
Saidi, M.S. Submicron particle deposition in pulmonary alveoli during cyclic breathing [Volume 24, Issue 4, 2017, Pages 1975-1984]
Salami, N. First-principles study of strain-induced charge polarization in a molybdenum disulfide monolayer [Volume 24, Issue 3, 2017, Pages 1724-1733]
Salami Hosseini, Mahdi Investigating the viscoelastic fluid behavior in hollow fiber membrane fabrication process using Giesekus' model [Volume 24, Issue 6, 2017, Pages 3053-3063]
Salarieh, H. Parameter identification of a parametrically excited rate micro-gyroscope using recursive least squares method [Volume 24, Issue 4, 2017, Pages 1889-2019]
Salarieh, H. Induced generalized interval neutrosophic Shapley hybrid operators and their application in multi-attribute decision making [Volume 24, Issue 4, 2017, Pages 2164-2181]
Saleh, Aboozar Tubular Web RBS Connection to Improve Seismic Behavior of Moment Resisting Steel Frames [Volume 24, Issue 6, 2017, Pages 2726-2740]
Salehi, S.M. A new technique of the irst and second limits" for wagon maintenance in railway tracks consisting of sharp curves based on the empirical study of wheel wear [Volume 24, Issue 3, 2017, Pages 1171-1180]
Salehi Neyshabouri, S.A.A. The objective design of triangular bucket for dam's spillway using Non-dominated Sorting Genetic Algorithm II: NSGA-II [Volume 24, Issue 1, 2017, Pages 19-27]
Saleh jalali, Reza Strain Rate Effect in the Mesoscopic Modeling of High-Strength Steel Fiber-Reinforced Concrete [Volume 24, Issue 2, 2017, Pages 512-525]
Salimi asl, Aydin Applying a multi sensor system to predict and simulate the tool wear using of artificial neural networks [Volume 24, Issue 6, 2017, Pages 2864-2874]
Salmasnia, A. A computational approach to economic production quantity model for perishable products with backordering shortage and stock-dependent demand [Volume 24, Issue 4, 2017, Pages 2138-2151]
Salmasnia, Ali A Multi-Objective Multi-State Degraded System to Optimize Maintenance/Repair Costs and System Availability [Volume 24, Issue 1, 2017, Pages 355-363]
Samanipour, K. Effects of viscoelastic supports on the behavior of bridges under moving vehicles [Volume 24, Issue 4, 2017, Pages 1751-1769]
Sanayei, Hamed Reza Zarif Innovative Analytical Solutions to 1, 2 and 3D Water Infiltration into Unsaturated Soils for Initial-Boundary Value Problems [Volume 24, Issue 5, 2017, Pages 2346-2368]
Sanchez, J.M. On the solution of a contact problem for a rhombus weakened with a full-strength hole [Volume 24, Issue 1, 2017, Pages 183-190]
Sapawe, N. Surface modification of biomaterial embedded with pits using die sinker machine [Volume 24, Issue 4, 2017, Pages 1901-1911]
Saravanan, P. Topological and non-topological soliton solution of the 1 + 3 dimensional Gross-Pitaevskii equation with quadratic potential term [Volume 24, Issue 5, 2017, Pages 2429-2435]
Sarkar, B. Human errors incorporation in work-in-process group manufacturing system [Volume 24, Issue 4, 2017, Pages 2050-2061]
Sarvari Karajabad, Masoumeh Pyridylmethylaminoacetic acid functionalized Fe3O4 magnetic nanorods as an efficient catalyst for the synthesis of 2-aminochromene and 2-aminopyran derivatives [Volume 24, Issue 6, 2017, Pages 3022-3031]
Sasireka, K. Optimization of Hedging Rules for Hydropower Reservoir Operation [Volume 24, Issue 5, 2017, Pages 2242-2252]
Sayed Razavi, Mohammad Theoretical and computational investigation of optimal wall shear stress in bifurcations: a generalization of Murray’s law [Volume 24, Issue 5, 2017, Pages 2387-2395]
Sayevand, K. A reliable implicit difference scheme for treatments of fourth-order fractional sub-diffusion equation [Volume 24, Issue 3, 2017, Pages 1100-1107]
Sedighin, S. Effiiently computing the smallest axis-parallel squares spanning all colors [Volume 24, Issue 3, 2017, Pages 1325-1334]
Seif, Mohammad Saeed Evaluation of planing craft maneuverability using mathematical modeling under the action of the rudder [Volume 24, Issue 1, 2017, Pages 293-301]
Seifbarghy, M. Sustainable supply chain design with water environmental impacts and justice-oriented employment considerations: A case study in textile industry [Volume 24, Issue 4, 2017, Pages 2119-2137]
Sepahvand, A. Time complexity of two disjoint simple paths [Volume 24, Issue 3, 2017, Pages 1335-1343]
Seyedabrishami, S. E. Simultaneous Train Rescheduling through Cancelling, Delaying and Re-Ordering Policies: Three-Phase Solution Method with Guaranteed Optimality [Volume 24, Issue 1, 2017, Pages 121-135]
Seyyedsalehi, S. A. An Optimum Neural Network for Evolutionary Aerodynamic Shape Design [Volume 24, Issue 5, 2017, Pages 2490-2500]
Shabani, Ali. Akbar Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
Shabani, R. Stress Analyses in Single Deck and Double Deck Floating Roofs Subjected to Earthquake Ground Motions [Volume 24, Issue 2, 2017, Pages 727-739]
Shabanpour, N. Sequencing of mixed models on U-shaped assembly lines by considering effective help policies in make-to-order environment [Volume 24, Issue 3, 2017, Pages 1493-1504]
Shademani, Roya Numerical Assessment of turbulence effect on Forces, Spray parameters, and secondary impact in wedge water entry problem using k-ε method [Volume 24, Issue 1, 2017, Pages 223-236]
Shafi, AliAkbar Two-warehouse inventory model for deteriorating items with imperfect quality under the conditions of permissible delay in payments [Volume 24, Issue 1, 2017, Pages 390-412]
Shafieyanb, C. Strength and elastic moduli of a concrete bridge using advanced nondestructive techniques [Volume 24, Issue 3, 2017, Pages 942-952]
Shahabi, Ali An integrated train scheduling and infrastructure development model in railway networks [Volume 24, Issue 6, 2017, Pages 3409-3422]
Shahbazi, Kh. Experimental study of rheological properties of aphron based drilling Fluids and their effects on formation damage [Volume 24, Issue 3, 2017, Pages 1241-1252]
Shahbazi-Alavi, H. A Flexible one-pot synthesis of pyrazolopyridines catalyzed by Fe3O4@SiO2-SO3H nanocatalyst under microwave irradiation [Volume 24, Issue 3, 2017, Pages 1209-1219]
Shahi, Sh. Evaluation of physical and mechanical properties of B-tri-calcium phosphate/poly-3-hydroxybutyrate nanocomposite scaffold for bone tissue engineering application [Volume 24, Issue 3, 2017, Pages 1654-1668]
Shahmohamadi, M. Three-dimensional axisymmetric responses of exponentially graded transversely isotropic tri-materials under interfacial loading [Volume 24, Issue 3, 2017, Pages 966-978]
Shahmohamadi, Mohammad Amin Effects of shear deformation on Mechanical and thermo-mechanical nonlinear stability of FGM shallow spherical shells subjected to uniform external pressure [Volume 24, Issue 2, 2017, Pages 584-596]
Shahriari-kahkeshi, M. Robust fault detection and isolation scheme using fuzzy wavelet network with a hybrid design algorithm [Volume 24, Issue 3, 2017, Pages 1467-1481]
Shahtahmasebi, N. Synthesis and antimicrobial properties of ZnO/PVA, CuO/PVA, and TiO2/PVA nanocomposites [Volume 24, Issue 3, 2017, Pages 1717-1723]
Shakeri Kebria, Z. The combination of TOPSIS method and Dijkstra’s algorithm in multi-attribute routing [Volume 24, Issue 5, 2017, Pages 2540-2549]
Shakibayifar, Masoud An integrated train scheduling and infrastructure development model in railway networks [Volume 24, Issue 6, 2017, Pages 3409-3422]
Shakoor, M.H. Repeating average filter for noisy texture classification [Volume 24, Issue 3, 2017, Pages 1419-1436]
Shams, Sh. Impact crushing behavior of foam-filled paraboloid shells using numerical and experimental methods [Volume 24, Issue 4, 2017, Pages 1912-1921]
Shariatmadari, N. Experimental study on behavior of soil-waste tire mixtures [Volume 24, Issue 1, 2017, Pages 65-71]
Sheikhani, Ali Poincaré Section based Biomarkers of Hemispheric Asymmetry, applied to Autism Spectrum Disorder [Volume 24, Issue 6, 2017, Pages 3257-3267]
Shekarappa, Sharath Synthesis of Nα-protected formamides from amino acids using MgO nano catalyst: Study of molecular docking and antibacterial activity [Volume 24, Issue 6, 2017, Pages 3002-3013]
Shervani-Tabar, M.T. Numerical study on the effect of the concave rigid boundaries on the cavitation intensity [Volume 24, Issue 4, 2017, Pages 1958-1965]
Shi, Z.S. Optimal design of grid-connected hybrid renewable energy systems using multi-objective evolutionary algorithm [Volume 24, Issue 6, 2017, Pages 3148-3156]
Shirani, Ebrahim Theoretical and computational investigation of optimal wall shear stress in bifurcations: a generalization of Murray’s law [Volume 24, Issue 5, 2017, Pages 2387-2395]
Shojaei, A. pH-Responsive Nanostructured Polyaniline Capsules for Self-Healing Corrosion Protection: The Influence of Capsule Concentration [Volume 24, Issue 6, 2017, Pages 3512-3520]
Shojaie, S. Design of an innovative construction model for supply chain management by measuring agility and cost of quality: An empirical study [Volume 24, Issue 5, 2017, Pages 2515-2526]
Shojaosadati, Seyed Abbas Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
Shokran Neam, Alirez Attenuation Relation for Near Field Shallow Crustal Earthquakes Using NGA-West Database with Mixed-Effect Model in Comparison with Attenuation Relations for Iran [Volume 24, Issue 5, 2017, Pages 2183-2201]
Shokri, A.A. First-principles study of strain-induced charge polarization in a molybdenum disulfide monolayer [Volume 24, Issue 3, 2017, Pages 1724-1733]
Shokrollahi, Saeed An investigation into the accelerometer mounting effects on signal transmissibility in modal measurements [Volume 24, Issue 5, 2017, Pages 2436-2444]
Shooshpasha, Issa Polynomial Models Controlling Strength of Zeolite-Cement-Sand Mixtures [Volume 24, Issue 2, 2017, Pages 526-536]
Silberschmidt, Vadim V. Dynamic Behaviour of β-Ti-15333 in Ultrasonically Assisted Turning: Experimental and Numerical Analysis [Volume 24, Issue 6, 2017, Pages 2904-2914]
Simab, A. Using integrated method to rank the power system contingency [Volume 24, Issue 3, 2017, Pages 1373-1383]
Simab, M. Using integrated method to rank the power system contingency [Volume 24, Issue 3, 2017, Pages 1373-1383]
Sinaeian, Fereidoon Ground Motion Prediction Equation for Inelastic Spectral Displacement in Iran [Volume 24, Issue 1, 2017, Pages 164-182]
Sivasankaran, S. Hydro-magnetic mixed convection in a lid-driven cavity with partially thermally active walls [Volume 24, Issue 1, 2017, Pages 153-163]
Sivasankaran, S. Chemical reaction, soret and dufour effects on MHD mixed convection stagnation point flow with radiation and slip condition [Volume 24, Issue 2, 2017, Pages 698-706]
Sivasankaran, S. Zero and nonzero normal fluxes of thermal radiative boundary layer flow of nanofluid over a radially stretched surface [Volume 24, Issue 6, 2017, Pages 2895-2903]
Slushash, Abdygaliyeva Integrated system for the use of solar energy in the animal farm [Volume 24, Issue 6, 2017, Pages 3213-3222]
Sohrabi Gilani, Morteza Stability analysis of arch dam abutments due to seismic loading [Volume 24, Issue 2, 2017, Pages 467-475]
Sohrabpour, S. A new technique of the irst and second limits" for wagon maintenance in railway tracks consisting of sharp curves based on the empirical study of wheel wear [Volume 24, Issue 3, 2017, Pages 1171-1180]
Solaimany Nazar, A.R. Degradation of furfural in contaminated water by titanium and iron oxide nanophotocatalysts based on the natural zeolite (clinoptilolite) [Volume 24, Issue 3, 2017, Pages 1221-1229]
Soleymani Shishvan, S. Effects of particle shape and size distribution on particle size-dependent flow strengthening in metal matrix composites [Volume 24, Issue 3, 2017, Pages 1091-1099]
Solimanpur, M. Development of Supply Chain Strategy in Iranian Automotive Industry Based on System Dynamics and Game Theory [Volume 24, Issue 6, 2017, Pages 3345-3354]
Soltani, M.R. Effect of wind tunnel wall porosity on the flow around an oscillating airfoil at transonic speeds [Volume 24, Issue 3, 2017, Pages 1069-1076]
Soltani, N. Seismic Wave Scatter Study in Valleys Using Coupled 2D Finite Element Approach and Absorbing Boundaries [Volume 24, Issue 1, 2017, Pages 110-120]
Soltani-Dehnavi, Sh. Copper-doped and copper-free bioactive glass nanopowders cytotoxicity and antibacterial activity assessment [Volume 24, Issue 3, 2017, Pages 1706-1716]
Soofi, Parham An ANN-based optimization model for facility layout problem using simulation Technique [Volume 24, Issue 1, 2017, Pages 364-377]
Subramanian, E. Enhanced heterogeneous wet hydrogen peroxide catalytic oxidation performance of fly ash-derived zeolite by CuO incorporation [Volume 24, Issue 3, 2017, Pages 1189-1202]
Syahrullail, S. A new approach for cold extrusion process: Dimples indentation on sliding contact surface and palm oil as an alternative lubricant [Volume 24, Issue 6, 2017, Pages 2875-2886]
Syahrullail, S. Surface modification of biomaterial embedded with pits using die sinker machine [Volume 24, Issue 4, 2017, Pages 1901-1911]
T
Tabatabaee, N. Effects of moisture on warm mix asphalt containing Sasobit [Volume 24, Issue 4, 2017, Pages 1866-1873]
Tabkhi Wayghan, Amir Reza The effect of gusset plate in moment-rotation behavior of double-web angle connection, in braced frames [Volume 24, Issue 6, 2017, Pages 2712-2725]
Tafakori, Ehsan Assessment of Collapse Modes in Reinforced Concrete Frames Considering Record-to-Record and Modeling Uncertainties [Volume 24, Issue 5, 2017, Pages 2213-2226]
Taghavifard, M.T. Bi-level programming for supplier selection under quantity discount policy [Volume 24, Issue 4, 2017, Pages 2095-2104]
Taghikhany, Touraj Attenuation Relation for Near Field Shallow Crustal Earthquakes Using NGA-West Database with Mixed-Effect Model in Comparison with Attenuation Relations for Iran [Volume 24, Issue 5, 2017, Pages 2183-2201]
Taheri Taromsari, M. Optimum two-dimensional crack modeling in discrete least-squares meshless method by charged system search algorithm [Volume 24, Issue 1, 2017, Pages 143-152]
Tahghighi, H. Influence of foundation flexibility on the seismic response of low-to-mid-rise moment-resisting frame buildings [Volume 24, Issue 3, 2017, Pages 979-992]
Tahmoresnezhad, J. DiReT: An effective discriminative dimensionality reduction approach for multi-source transfer learning [Volume 24, Issue 3, 2017, Pages 1303-1311]
Tajalli, M. Dynamic load testing of a railway masonry arch bridge: A case study of Babak Bridge [Volume 24, Issue 4, 2017, Pages 1834-1842]
Tajeripour, F. Repeating average filter for noisy texture classification [Volume 24, Issue 3, 2017, Pages 1419-1436]
Talebbeydokhti, N. Uncertainty analysis of open channel flow: stochastic approach to Advection–Diffusion equation [Volume 24, Issue 5, 2017, Pages 2262-2270]
Talebbeydokhti, N. Innovative Analytical Solutions to 1, 2 and 3D Water Infiltration into Unsaturated Soils for Initial-Boundary Value Problems [Volume 24, Issue 5, 2017, Pages 2346-2368]
Talebi, S. Amplitude reconstruction of clipped OFDM by using DFT-based least squares [Volume 24, Issue 3, 2017, Pages 1353-1362]
Taleizadeh, A.A. Vendor-managed inventory system with partial backordering for evaporating chemical raw material [Volume 24, Issue 3, 2017, Pages 1483-1492]
Tale Masouleh, Mehdi A Robust Proportion-Preserving Composite Objective Function for Scale-Invariant Multi-Objective Optimization [Volume 24, Issue 6, 2017, Pages 2977-2991]
Tamannaei, M. Simultaneous Train Rescheduling through Cancelling, Delaying and Re-Ordering Policies: Three-Phase Solution Method with Guaranteed Optimality [Volume 24, Issue 1, 2017, Pages 121-135]
Tamer Ozdemir, A. Effect of deep sub-zero treatment on mechanical properties of AA5XXX aluminum plates adjoined by MIG welding technique [Volume 24, Issue 4, 2017, Pages 1950-1957]
Tang, G.L. Induced generalized interval neutrosophic Shapley hybrid operators and their application in multi-attribute decision making [Volume 24, Issue 4, 2017, Pages 2164-2181]
Tariverdilo, S. Stress Analyses in Single Deck and Double Deck Floating Roofs Subjected to Earthquake Ground Motions [Volume 24, Issue 2, 2017, Pages 727-739]
Tavakkoli-Moghaddam, R. Design of an innovative construction model for supply chain management by measuring agility and cost of quality: An empirical study [Volume 24, Issue 5, 2017, Pages 2515-2526]
Tavakkoli-Moghaddam, Reza A new mathematical model for a scheduling problem of dynamic machine-tool selection and operation allocation in a flexible manufacturing system: A modified evolutionary algorithm [Volume 24, Issue 2, 2017, Pages 765-777]
Tavakkoli-Moghaddam, Reza A capacitated bike sharing location-allocation problem under demand uncertainty using sample average approximation: A greedy Genetic-Particle Swarm Optimization algorithm [Volume 24, Issue 5, 2017, Pages 2567-2580]
Tavakoli, A. n-pentane isomerization over Pt-Al promoted sulfated zirconia nanocatalyst [Volume 24, Issue 3, 2017, Pages 1264-1271]
Tayaranian Marvian, Amir Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
Tchier, F. Nonsingular fast terminal sliding-mode stabilizer for a class of uncertain nonlinear systems based on disturbance observer [Volume 24, Issue 3, 2017, Pages 1410-1418]
Teimouri, M. A prototype-based classification using extended imperialist competitive algorithm [Volume 24, Issue 4, 2017, Pages 2062-2081]
Teimoury, Ebrahim An Integrated Pricing and Inventory Model for Deteriorating Products in a two stage supply chain under Replacement and Shortage [Volume 24, Issue 1, 2017, Pages 342-354]
Tekeli, H. An experimental study of the seismic behavior of infilled RC frames with opening [Volume 24, Issue 5, 2017, Pages 2271-2282]
Terryn, H. pH-Responsive Nanostructured Polyaniline Capsules for Self-Healing Corrosion Protection: The Influence of Capsule Concentration [Volume 24, Issue 6, 2017, Pages 3512-3520]
Thomas, A. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]
Tiberto, Paola The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
TIigdemir, M. Fatigue life prediction of the modified asphalt mixtures with ANFIS modeling [Volume 24, Issue 1, 2017, Pages 72-81]
Timnak, N. An Optimum Neural Network for Evolutionary Aerodynamic Shape Design [Volume 24, Issue 5, 2017, Pages 2490-2500]
Ting, Pin-Shou A simple solution procedure to solve the multi-delivery policy into economic production lot size problem with partial rework [Volume 24, Issue 5, 2017, Pages 2640-2644]
Tiwari, Sunil Two-warehouse inventory model for deteriorating items with imperfect quality under the conditions of permissible delay in payments [Volume 24, Issue 1, 2017, Pages 390-412]
Tran, Ngoc - Cuong A One-Parameter Controlled Dissipative Unconditionally Stable Explicit Algorithm for Time History Analysis [Volume 24, Issue 5, 2017, Pages 2307-2319]
Tripathi, Alka Some improved interactive aggregation operators under interval-valued intuitionistic fuzzy environment and its application to decision making process [Volume 24, Issue 5, 2017, Pages 2581-2604]
Tuzandejani, H. Impact crushing behavior of foam-filled paraboloid shells using numerical and experimental methods [Volume 24, Issue 4, 2017, Pages 1912-1921]
U
Ullah, Hakeem MHD boundary layer flow of an incompressible upper convected Maxwell fluid by Optimal Homotopy Asymptotic Method. [Volume 24, Issue 1, 2017, Pages 202-210]
Ullah, Himayat Dynamic Behaviour of β-Ti-15333 in Ultrasonically Assisted Turning: Experimental and Numerical Analysis [Volume 24, Issue 6, 2017, Pages 2904-2914]
Ullah, M. Human errors incorporation in work-in-process group manufacturing system [Volume 24, Issue 4, 2017, Pages 2050-2061]
Umer, M. An integrated approach of quality for polymer composite manufacturing validated and optimized through Taguchi method [Volume 24, Issue 4, 2017, Pages 1985-1995]
Uygur, I. Effect of deep sub-zero treatment on mechanical properties of AA5XXX aluminum plates adjoined by MIG welding technique [Volume 24, Issue 4, 2017, Pages 1950-1957]
Uysal, Handan Toxic Effects of Chronic Feeding with Food Azo Dyes on Drosophila melanogaster Oregon R [Volume 24, Issue 6, 2017, Pages 3081-3086]
Uzun, M. Effect of deep sub-zero treatment on mechanical properties of AA5XXX aluminum plates adjoined by MIG welding technique [Volume 24, Issue 4, 2017, Pages 1950-1957]
V
Vafaei, Abbas Ali Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
Vafai, H. Effects of viscoelastic supports on the behavior of bridges under moving vehicles [Volume 24, Issue 4, 2017, Pages 1751-1769]
Vafamand, A . Investigating the experimental behavior of the reinforcements effect on the railway traverse under the dynamic load [Volume 24, Issue 5, 2017, Pages 2253-2261]
Vahdati Khaki, Jalil Effect of Cu2+ ion on Biological Performance of Nanostructured Fluorapatite Doped with Copper [Volume 24, Issue 6, 2017, Pages 2845-2855]
Vahid, Amir H2S Removal Using ZnO/SBA-3: New Synthesis Route and Optimization of Process Parameters [Volume 24, Issue 6, 2017, Pages 3064-3073]
Valtierra-Rodriguez, M. Current efforts for prediction and assessment of natural disasters: Earthquakes, tsunamis, volcanic eruptions, hurricanes, tornados, and floods [Volume 24, Issue 6, 2017, Pages 2645-2664]
Varghese, J. Frequency-domain-based switching median filter for the restoration of images corrupted with high-density periodic noise [Volume 24, Issue 3, 2017, Pages 1312-1324]
Vatankhah, Elham Impact of electrospun Tecophilic/gelatin scaffold biofunctionalization on proliferation of vascular smooth muscle cells [Volume 24, Issue 6, 2017, Pages 3458-3465]
Vatanparast, M. Impact crushing behavior of foam-filled paraboloid shells using numerical and experimental methods [Volume 24, Issue 4, 2017, Pages 1912-1921]
Veiskarami, Mehdi Stability of Supported Vertical Cuts in Granular Matters in Presence of the Seepage Flow by a Semi-Analytical Approach [Volume 24, Issue 2, 2017, Pages 537-550]
Vossoughi, M. Comparison and optimization of conjugated linoleic acid production by Lactobacillus plantarum and Lactobacillus plantarum subsp. plantarum [Volume 24, Issue 3, 2017, Pages 1272-1280]
W
Waezi, Zakariya On the Evolutionary Characteristics of the Acceleration Records Generated From Linear Time-Variant Systems [Volume 24, Issue 6, 2017, Pages 2817-2831]
Wang, H. Effects of edge rate of the designed line markings on the following time headway [Volume 24, Issue 4, 2017, Pages 1770-1778]
Wang, Jingfang Effects of leakage inductance on the input current of double star diode rectifier with active inter-phase reactor [Volume 24, Issue 6, 2017, Pages 3193-3203]
Wang, R. Optimal design of grid-connected hybrid renewable energy systems using multi-objective evolutionary algorithm [Volume 24, Issue 6, 2017, Pages 3148-3156]
Wei, B. X. Assessment of change in acoustic wave velocity of compacted expansive soil through experiments [Volume 24, Issue 1, 2017, Pages 136-142]
Wu, Tsui - Huang A One-Parameter Controlled Dissipative Unconditionally Stable Explicit Algorithm for Time History Analysis [Volume 24, Issue 5, 2017, Pages 2307-2319]
Y
YAGCI, Mustafa An alternative boom design and welding technique to minimize energy consumption during boom production [Volume 24, Issue 6, 2017, Pages 2856-2863]
Yaghmaei-Sabegh, S. Selection and scaling of spectrum-compatible ground motion records using hybrid coded genetic algorithms [Volume 24, Issue 3, 2017, Pages 910-925]
Yaghobi, Maryam Group classification of the time-fractional Kaup-Kupershmidt equation [Volume 24, Issue 1, 2017, Pages 302-307]
Yaghoubi, M. Surface tension simulation of free surface flows using smoothed particle hydrodynamics [Volume 24, Issue 4, 2017, Pages 2019-2033]
Yakhchalian, M. Reliable seismic collapse assessment of short-period structures using new proxies for ground motion record selection [Volume 24, Issue 5, 2017, Pages 2283-2293]
Yang, Shiyan Effects of leakage inductance on the input current of double star diode rectifier with active inter-phase reactor [Volume 24, Issue 6, 2017, Pages 3193-3203]
Yang, Yuan - Sen A One-Parameter Controlled Dissipative Unconditionally Stable Explicit Algorithm for Time History Analysis [Volume 24, Issue 5, 2017, Pages 2307-2319]
Yashiro, Hitoshi Investigation of carbon phase evolutions in titanium nitride-carbon nanocomposites prepared in supercritical benzene with respect to their lithium storage capacity [Volume 24, Issue 6, 2017, Pages 3481-3490]
Yazdi, S. Using integrated method to rank the power system contingency [Volume 24, Issue 3, 2017, Pages 1373-1383]
Yeganehdoust, F. Surface tension simulation of free surface flows using smoothed particle hydrodynamics [Volume 24, Issue 4, 2017, Pages 2019-2033]
Yegani, Reza Investigating the viscoelastic fluid behavior in hollow fiber membrane fabrication process using Giesekus' model [Volume 24, Issue 6, 2017, Pages 3053-3063]
YILDIZ, Merih A High Performance Full-Wave Rectifier Using a Single CCII-, Two Diodes and Two Resistor [Volume 24, Issue 6, 2017, Pages 3280-3286]
Yousefi, Elahe Investigation of carbon phase evolutions in titanium nitride-carbon nanocomposites prepared in supercritical benzene with respect to their lithium storage capacity [Volume 24, Issue 6, 2017, Pages 3481-3490]
Yousefpour, K. Light Oil – Gas Two-Phase Flow Pattern Identification in Different Pipe Orientations: An Experimental Approach [Volume 24, Issue 5, 2017, Pages 2445-2456]
YUCE, Erkan A High Performance Full-Wave Rectifier Using a Single CCII-, Two Diodes and Two Resistor [Volume 24, Issue 6, 2017, Pages 3280-3286]
Yue, Z. A projection-based approach to intuitionistic fuzzy group decision making [Volume 24, Issue 3, 2017, Pages 1505-1518]
Z
Zafari, Y. Three-dimensional axisymmetric responses of exponentially graded transversely isotropic tri-materials under interfacial loading [Volume 24, Issue 3, 2017, Pages 966-978]
Zahab, S. Impact crushing behavior of foam-filled paraboloid shells using numerical and experimental methods [Volume 24, Issue 4, 2017, Pages 1912-1921]
Zahedi, Ali Conditioning of vitrified and resin bond CBN grinding wheels using a picosecond laser [Volume 24, Issue 5, 2017, Pages 2369-2378]
Zaheri, F. Bi-level programming for supplier selection under quantity discount policy [Volume 24, Issue 4, 2017, Pages 2095-2104]
Zahrai, Seyed Mehdi Tubular Web RBS Connection to Improve Seismic Behavior of Moment Resisting Steel Frames [Volume 24, Issue 6, 2017, Pages 2726-2740]
Zakeri-Niri, M. Application of Neural Network Models to Improve Prediction Accuracy of Wave Run-up on Antifer Covered Breakwater [Volume 24, Issue 2, 2017, Pages 567-575]
Zamani, Bahman A novel approach for automatic model-based test case generation [Volume 24, Issue 6, 2017, Pages 3132-3147]
Zamani, S. Development of a Cournot-oligopoly model for competition of multi-product supply chains under government supervision [Volume 24, Issue 3, 2017, Pages 1519-1532]
Zandieh, M. Bi-level programming for supplier selection under quantity discount policy [Volume 24, Issue 4, 2017, Pages 2095-2104]
Zandieh, Mostafa A multi-objective multi-echelon green supply chain network design problem with risk-averse retailers in an uncertain environment [Volume 24, Issue 1, 2017, Pages 413-423]
Zanjireh, Yousef Time difference of arrival estimation of sound source using Cross Correlation and modified maximum likelihood weighting function [Volume 24, Issue 6, 2017, Pages 3268-3279]
Zarandi, Hamid R. Comparison and Analysis of Three Anomaly Correction Methods in Embedded Systems [Volume 24, Issue 6, 2017, Pages 3087-3100]
Zardari, Muhammad Auchar Comparison of three dimensional and two dimensional axisymmetric finite element analyses of a corner section of a tailings dam [Volume 24, Issue 5, 2017, Pages 2320-2331]
Zaretalab, A. A bi-objective model to optimize reliability and cost of k-out-of-n series-parallel systems with tri-state components [Volume 24, Issue 3, 2017, Pages 1585-1602]
Zaretalab, A. A prototype-based classification using extended imperialist competitive algorithm [Volume 24, Issue 4, 2017, Pages 2062-2081]
Zarrabi, M. Study of pile behavior by improvement of confining soils using frustum confining vessel [Volume 24, Issue 4, 2017, Pages 1874-1882]
Zegordi, S.H. Integrated production and distribution scheduling for perishable products [Volume 24, Issue 4, 2017, Pages 2105-2118]
Zehtabiyan - Rezaie, Navid Generalized Heat Transfer and Entropy Generation of Stratified Air-Water Flow in Entrance of a Mini-channel [Volume 24, Issue 5, 2017, Pages 2407-2417]
Zeinali, S. Detecting shoreline changes in Chabahar Bay by processing satellite images [Volume 24, Issue 4, 2017, Pages 1802-1809]
Zhang, T. Optimal design of grid-connected hybrid renewable energy systems using multi-objective evolutionary algorithm [Volume 24, Issue 6, 2017, Pages 3148-3156]
Zhang, X.Y. Optimal design of grid-connected hybrid renewable energy systems using multi-objective evolutionary algorithm [Volume 24, Issue 6, 2017, Pages 3148-3156]
Zhang, Y. Optimal design of grid-connected hybrid renewable energy systems using multi-objective evolutionary algorithm [Volume 24, Issue 6, 2017, Pages 3148-3156]
Zhou, Weiqi Research on the inventory control of the remanufacturing reverse logistics based on the quantitative examination [Volume 24, Issue 2, 2017, Pages 741-750]
Zhu, S. Effects of edge rate of the designed line markings on the following time headway [Volume 24, Issue 4, 2017, Pages 1770-1778]
Ziaee, M. Single machine scheduling problem with convex multi-resource dependent processing times and job deadlines [Volume 24, Issue 2, 2017, Pages 847-855]
Zubair Khan, M. An integrated approach of quality for polymer composite manufacturing validated and optimized through Taguchi method [Volume 24, Issue 4, 2017, Pages 1985-1995]
