Author Index

A

  • Abachi, Parvin The effect of current density on microstructural homogeneity, hardness, fracture toughness and electrochemical behavior of electrodeposited Cu-0.5Co/WC nano-composite coating [Volume 24, Issue 6, 2017, Pages 3505-3511]
  • Abadyan, M. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
  • Abadyan, Mohamadreza A modified model for stability analysis of narrow-width NEMS tweezers: Corrections due to surface layer, scale dependency and force distributions [Volume 24, Issue 2, 2017, Pages 673-683]
  • Abam, M.A. Effiiently computing the smallest axis-parallel squares spanning all colors [Volume 24, Issue 3, 2017, Pages 1325-1334]
  • Abasifard, M. Petahertz-frequency plasmons in graphene nanopore and their application to nanoparticle sensing [Volume 24, Issue 3, 2017, Pages 1669-1677]
  • Abbas, N. Performance evaluation of joint monitoring control charts [Volume 24, Issue 4, 2017, Pages 2152-2163]
  • Abbasgholipour, M. Various types of ceramics used in radome: A review [Volume 24, Issue 3, 2017, Pages 1136-1147]
  • Abbasi, A. Preparation of MoO3/CuMoO4 nanoparticles as selective catalyst for olefin epoxidation [Volume 24, Issue 3, 2017, Pages 1203-1208]
  • Abbasi, Fateme The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
  • Abbasi, S.A. On enhanced sensitivity of nonparametric EWMA control charts for process monitoring [Volume 24, Issue 1, 2017, Pages 424-438]
  • Abbasi, S.A. Monitoring of serially correlated processes using residual control charts [Volume 24, Issue 3, 2017, Pages 1603-1614]
  • Abbasi, Zeinab The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
  • Abbassi, A. Numerical simulation of the effect of visitor's movement on bacteria-carrying particles distribution in hospital isolation room [Volume 24, Issue 3, 2017, Pages 1160-1170]
  • Abderezaei, Javid Transient behavior of electrostatically-actuated micro systems considering squeeze film damping and mechanical shock [Volume 24, Issue 6, 2017, Pages 2887-2894]
  • Abdollahnejad, Z. Increasing the flexural capacity of geopolymer concrete beams using partially deflection hardening cement-based layers: Numerical study [Volume 24, Issue 6, 2017, Pages 2832-2844]
  • Abdul Aziz, M.S. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
  • Abdullah, M.Z. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
  • Ab Ghani, A. Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel [Volume 24, Issue 3, 2017, Pages 1000-1009]
  • Abujiya, Mu’azu Ramat New EWMA S2 Control Charts for Monitoring Process Dispersion [Volume 24, Issue 1, 2017, Pages 378-389]
  • Adel, Farhad An investigation into the accelerometer mounting effects on signal transmissibility in modal measurements [Volume 24, Issue 5, 2017, Pages 2436-2444]
  • Adeli, H. Current efforts for prediction and assessment of natural disasters: Earthquakes, tsunamis, volcanic eruptions, hurricanes, tornados, and floods [Volume 24, Issue 6, 2017, Pages 2645-2664]
  • Adiutantov, N. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]
  • Afrazeh, Abbas A new model to optimize the knowledge exchange in industrial cluster: A case study of Semnan plaster production industrial cluster [Volume 24, Issue 2, 2017, Pages 834-846]
  • Afshar, M.H. An Adaptive Relaxed Cellular Automata Method for Reliability-Based Hydropower Operation of Reservoirs [Volume 24, Issue 5, 2017, Pages 2294-2306]
  • Afshin Hemmatyar, Ali Mohammad CMORC: Class-based Multipath On-demand Routing Protocol for Cognitive Radio Networks [Volume 24, Issue 6, 2017, Pages 3117-3131]
  • AfzaliTabar, M. Preference of Nano porous graphene to Single-Walled Carbon Nanotube (SWCNT) for preparing Silica Nano hybrid Pickering Emulsion for potential Chemical Enhanced Oil Recovery (C-EOR) [Volume 24, Issue 6, 2017, Pages 3491-3499]
  • Afzalzadeh, R. An Investigation on Effects of Applied Magnetic Field during Zn Vacuum Thermal Evaporation on ZnO Nanostructures [Volume 24, Issue 6, 2017, Pages 3526-3530]
  • Agarwal, Nikunj Some improved interactive aggregation operators under interval-valued intuitionistic fuzzy environment and its application to decision making process [Volume 24, Issue 5, 2017, Pages 2581-2604]
  • Aghayari, R. Investigating the seismic behavior of RC shear walls with openings strengthened with FRP sheets using different schemes [Volume 24, Issue 4, 2017, Pages 1855-1865]
  • Ahari, Mohammad Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
  • Ahmad, S. On enhanced sensitivity of nonparametric EWMA control charts for process monitoring [Volume 24, Issue 1, 2017, Pages 424-438]
  • Ahmadi, A. Amplitude reconstruction of clipped OFDM by using DFT-based least squares [Volume 24, Issue 3, 2017, Pages 1353-1362]
  • Ahmadi, G. Submicron particle deposition in pulmonary alveoli during cyclic breathing [Volume 24, Issue 4, 2017, Pages 1975-1984]
  • Ahmadi, Goodarz Airflow patterns in a 3D model of the human acinus [Volume 24, Issue 5, 2017, Pages 2379-2386]
  • Ahmadi, V. Petahertz-frequency plasmons in graphene nanopore and their application to nanoparticle sensing [Volume 24, Issue 3, 2017, Pages 1669-1677]
  • Ahmadi, Vahid A biosensor based on plasmonic wave excitation with diffractive grating structure [Volume 24, Issue 6, 2017, Pages 3441-3447]
  • Ahmadian, Hamid An investigation into the accelerometer mounting effects on signal transmissibility in modal measurements [Volume 24, Issue 5, 2017, Pages 2436-2444]
  • Ahmadian, M.T. Effect of size dependency on in-plane vibration of circular micro-rings [Volume 24, Issue 4, 2017, Pages 1996-2008]
  • Ahmadzadehtalatapeh, M. Feasibility study of a water-to-air heat pipe based heat exchanger for cooling load reduction and energy saving in the office buildings: A simulation study [Volume 24, Issue 3, 2017, Pages 1040-1050]
  • Ahmed, Naseer Dynamic Behaviour of β-Ti-15333 in Ultrasonically Assisted Turning: Experimental and Numerical Analysis [Volume 24, Issue 6, 2017, Pages 2904-2914]
  • Ak, T. Application of Petrov-Galerkin finite element method to shallow water waves model: Modified Korteweg-de Vries equation [Volume 24, Issue 3, 2017, Pages 1148-1159]
  • AKBABA, Mehmet Optimum Pole Arc Offset in Permanent Magnet Synchronous Generators for Obtaining Least Voltage Harmonics [Volume 24, Issue 6, 2017, Pages 3223-3230]
  • Akbari, AliAkbar Improving Lateral Dynamics of Vehicle Using Direct Yaw Moment Controller Based on Quantitative Feedback Theory [Volume 24, Issue 2, 2017, Pages 662-672]
  • Akbari, Javad Conditioning of vitrified and resin bond CBN grinding wheels using a picosecond laser [Volume 24, Issue 5, 2017, Pages 2369-2378]
  • Akbari Foroud, Asghar A New Solution Approach for Supply Function Equilibrium-based Bidding Strategy in Electricity Markets [Volume 24, Issue 6, 2017, Pages 3231-3246]
  • Akbarzadeh Bengar, Habib Effect of Steel and Concrete Coupling Beam on Seismic Behavior of RC Frame Accompanied with Coupled Shear Walls [Volume 24, Issue 5, 2017, Pages 2227-2241]
  • Akhavan Behabadi, M.A. Light Oil – Gas Two-Phase Flow Pattern Identification in Different Pipe Orientations: An Experimental Approach [Volume 24, Issue 5, 2017, Pages 2445-2456]
  • Akkaya, U. Application of trend analysis and artificial neural networks methods: The case of Sakarya River [Volume 24, Issue 3, 2017, Pages 993-999]
  • Alaei, M. Preference of Nano porous graphene to Single-Walled Carbon Nanotube (SWCNT) for preparing Silica Nano hybrid Pickering Emulsion for potential Chemical Enhanced Oil Recovery (C-EOR) [Volume 24, Issue 6, 2017, Pages 3491-3499]
  • Alaei, Reza Selecting unique suppliers through winner determination in combinatorial reverse auction: scatter search algorithm [Volume 24, Issue 6, 2017, Pages 3297-3307]
  • Alam Khan, L. An integrated approach of quality for polymer composite manufacturing validated and optimized through Taguchi method [Volume 24, Issue 4, 2017, Pages 1985-1995]
  • Alemzadeh, I. Comparison and optimization of conjugated linoleic acid production by Lactobacillus plantarum and Lactobacillus plantarum subsp. plantarum [Volume 24, Issue 3, 2017, Pages 1272-1280]
  • Ali, A. Performance evaluation of joint monitoring control charts [Volume 24, Issue 4, 2017, Pages 2152-2163]
  • Ali, F. M. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
  • Ali, Norhashidah Hj. M. New High Accuracy Non-polynomial Spline Group Explicit Iterative Method for Two Dimensional Elliptic Boundary Value Problems [Volume 24, Issue 6, 2017, Pages 3181-3192]
  • Aliakbari, Farhang Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
  • Alipour, Majid Assessment of labor productivity in construction projects using system dynamic approach [Volume 24, Issue 6, 2017, Pages 2684-2695]
  • Alizad, Arash Numerical Simulation of non-Newtonian Nanofluids Flow in Passive Injection Micromixers Using Mixture Model [Volume 24, Issue 1, 2017, Pages 211-222]
  • Alizadeh, Mostafa Phenol Removal from Aqueous Solution by Adsorption Process: Study of The Nanoparticles Performance Prepared from Alo vera and Mesquite (Prosopis) Leaves [Volume 24, Issue 6, 2017, Pages 3041-3052]
  • ALIZADEH, MAHDI A SEMANTIC ACCESS CONTROL MODEL FOR ONLINE SOCIAL NETWORKS [Volume 24, Issue 6, 2017, Pages 3101-3116]
  • ALVER, Veysel An alternative boom design and welding technique to minimize energy consumption during boom production [Volume 24, Issue 6, 2017, Pages 2856-2863]
  • Ameri, Ehsan A Multi-Objective Multi-State Degraded System to Optimize Maintenance/Repair Costs and System Availability [Volume 24, Issue 1, 2017, Pages 355-363]
  • Amezquita-Sanchez, J.P. Current efforts for prediction and assessment of natural disasters: Earthquakes, tsunamis, volcanic eruptions, hurricanes, tornados, and floods [Volume 24, Issue 6, 2017, Pages 2645-2664]
  • Amini, Negar The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
  • Amini, Yasser Piezoelectric energy harvesting from vertical piezoelectric beams in the horizontal fluid flows [Volume 24, Issue 5, 2017, Pages 2396-2405]
  • AMINI, MORTEZA A SEMANTIC ACCESS CONTROL MODEL FOR ONLINE SOCIAL NETWORKS [Volume 24, Issue 6, 2017, Pages 3101-3116]
  • Amiri, Amirhossein Maximum Multivariate Exponentially Weighted Moving Average and Maximum Multivariate Cumulative Sum Control Charts for Simultaneous Monitoring of Mean and Variability of Multivariate Multiple Linear Regression Profiles [Volume 24, Issue 5, 2017, Pages 2605-2622]
  • Amjadzadeh, M. An Innovative Emotion Assessment using Physiological Signals Based on The Combination Mechanism [Volume 24, Issue 6, 2017, Pages 3157-3170]
  • Anbarjafari, Gholamreza A Robust Proportion-Preserving Composite Objective Function for Scale-Invariant Multi-Objective Optimization [Volume 24, Issue 6, 2017, Pages 2977-2991]
  • Angooraj Taghavi, S. Optimization of ethylene oxychlorination fluidized-bed reactor using Differential Evolution (DE) method [Volume 24, Issue 3, 2017, Pages 1253-1263]
  • Ani, F. Che Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
  • A. Niaki, S.T. A bi-objective model to optimize reliability and cost of k-out-of-n series-parallel systems with tri-state components [Volume 24, Issue 3, 2017, Pages 1585-1602]
  • Ansari, R. On the oscillatory frequency of the carbon nanotube-based nanothermometers [Volume 24, Issue 3, 2017, Pages 1615-1625]
  • Ansarian, Hossein Computational Investigation of Vortex Breakdown over a Pitching Delta Wing at Supersonic Speeds [Volume 24, Issue 6, 2017, Pages 2915-2928]
  • Ansari-Asl, K. An Innovative Emotion Assessment using Physiological Signals Based on The Combination Mechanism [Volume 24, Issue 6, 2017, Pages 3157-3170]
  • A Nurul, M. A new approach for cold extrusion process: Dimples indentation on sliding contact surface and palm oil as an alternative lubricant [Volume 24, Issue 6, 2017, Pages 2875-2886]
  • Arab Kermani, Mojtaba Integrated Optimization of Guidance and Control Parameters in a Dual Spin Flying Vehicle [Volume 24, Issue 5, 2017, Pages 2473-2489]
  • Arehpanahi, M. Optimization of magnetic devices using Surface Current Method (SCM) [Volume 24, Issue 3, 2017, Pages 1345-1352]
  • Arghavani, J. Experimental and numerical study on the effect of aluminum foil wrapping on penetration resistance of ceramic tiles [Volume 24, Issue 3, 2017, Pages 1126-1135]
  • Arifin, N. M. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
  • Arjang, F. A reliable implicit difference scheme for treatments of fourth-order fractional sub-diffusion equation [Volume 24, Issue 3, 2017, Pages 1100-1107]
  • Arvani, Maedeh Graphene oxide/SnO2 Nanocomposite as Sensing Material for Breathalyzers: Selective Detection of Ethanol in the presence of Automotive CO and Hydrocarbons Emissions [Volume 24, Issue 6, 2017, Pages 3033-3040]
  • Arzani, H. Optimum two-dimensional crack modeling in discrete least-squares meshless method by charged system search algorithm [Volume 24, Issue 1, 2017, Pages 143-152]
  • Asghari, A. Evaluation of sensitivity of CBFs for types of Bracing and story numbers [Volume 24, Issue 1, 2017, Pages 40-52]
  • Asghari, A.-H. Effects of particle shape and size distribution on particle size-dependent flow strengthening in metal matrix composites [Volume 24, Issue 3, 2017, Pages 1091-1099]
  • Asghari Shivaee, Hossein Ultraviolet and Visible Upconversion Emissions in Er3+-Yb3+ Doped Titanium Dioxide Nanopowder under the 980 nm Laser Diode Excitation [Volume 24, Issue 6, 2017, Pages 3500-3504]
  • Asghari Shivaee, Hossein The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
  • Ashrafzadeh, Farah Poincaré Section based Biomarkers of Hemispheric Asymmetry, applied to Autism Spectrum Disorder [Volume 24, Issue 6, 2017, Pages 3257-3267]
  • Asil Gharebaghi, Saeed Modal Analysis of Two-Dimensional Beams Using Parallel Finite Element Method [Volume 24, Issue 6, 2017, Pages 2762-2775]
  • Asim, M. An integrated approach of quality for polymer composite manufacturing validated and optimized through Taguchi method [Volume 24, Issue 4, 2017, Pages 1985-1995]
  • Askari, Ehsan Ali A capacitated bike sharing location-allocation problem under demand uncertainty using sample average approximation: A greedy Genetic-Particle Swarm Optimization algorithm [Volume 24, Issue 5, 2017, Pages 2567-2580]
  • Ataei, Sh. Dynamic load testing of a railway masonry arch bridge: A case study of Babak Bridge [Volume 24, Issue 4, 2017, Pages 1834-1842]
  • Ates, H. Effect of deep sub-zero treatment on mechanical properties of AA5XXX aluminum plates adjoined by MIG welding technique [Volume 24, Issue 4, 2017, Pages 1950-1957]
  • Auchar Zardari, M. Long-term flexural behavior of reinforced baked clay beams [Volume 24, Issue 3, 2017, Pages 877-883]
  • Avaz Pour, P. Enhancing power system transient stability using optimal unified power flow controller based on Lyapunov control strategy [Volume 24, Issue 3, 2017, Pages 1458-1466]
  • Ayar, Arif Toxic Effects of Chronic Feeding with Food Azo Dyes on Drosophila melanogaster Oregon R [Volume 24, Issue 6, 2017, Pages 3081-3086]
  • Aydin, A. An experimental study of the seismic behavior of infilled RC frames with opening [Volume 24, Issue 5, 2017, Pages 2271-2282]
  • AYTAC, Ayse INVESTIGATION OF THE EFFECTS OF CARBONIC AGENT AND NANOCLAY ON THE PROPERTIES OF THE POLYLACTIC ACID BASED NANOCOMPOSITES [Volume 24, Issue 6, 2017, Pages 3074-3080]
  • Ayubirad, Mohammad sadegh Comparison of artificial neural network and coupled simulated annealing based least square support vector regression models for prediction of compressive strength of high-performance concrete [Volume 24, Issue 2, 2017, Pages 487-496]
  • Ayubi Rad, Mostafa Comparison of artificial neural network and coupled simulated annealing based least square support vector regression models for prediction of compressive strength of high-performance concrete [Volume 24, Issue 2, 2017, Pages 487-496]
  • Azadeh, M. A. Credibility-Based Fuzzy Mathematical Programming for Bi-Objective Capacitated Partial Facility Interdiction with Fortification and Demand Outsourcing Model [Volume 24, Issue 2, 2017, Pages 778-793]
  • Azadi, M Group classification of the time-fractional Kaup-Kupershmidt equation [Volume 24, Issue 1, 2017, Pages 302-307]
  • Azadi Hematabadi, Ahmad A New Solution Approach for Supply Function Equilibrium-based Bidding Strategy in Electricity Markets [Volume 24, Issue 6, 2017, Pages 3231-3246]
  • Azadi Moghaddam, M. Simultaneous Optimization of Joint Edge Geometry and Process Parameters in Gas Metal Arc Welding Using Integrated ANN - PSO Approach [Volume 24, Issue 1, 2017, Pages 260-273]
  • Azarhoushang, Bahman Conditioning of vitrified and resin bond CBN grinding wheels using a picosecond laser [Volume 24, Issue 5, 2017, Pages 2369-2378]
  • Azari, Esmaeel Decreasing the Crane Working Time in Retrieving the Containers from a Bay [Volume 24, Issue 1, 2017, Pages 309-318]
  • Azhir, E. Synthesis and antimicrobial properties of ZnO/PVA, CuO/PVA, and TiO2/PVA nanocomposites [Volume 24, Issue 3, 2017, Pages 1717-1723]
  • Azid, I.A. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
  • Azimi, B. Evaluation of sensitivity of CBFs for types of Bracing and story numbers [Volume 24, Issue 1, 2017, Pages 40-52]
  • Azimi, P. Solving the redundancy allocation problem of k-out-of-n with non-exponential repairable components using optimization via simulation approach [Volume 24, Issue 3, 2017, Pages 1547-1560]
  • Azimi, Parham An ANN-based optimization model for facility layout problem using simulation Technique [Volume 24, Issue 1, 2017, Pages 364-377]
  • Azizipour, Mohammad An Adaptive Relaxed Cellular Automata Method for Reliability-Based Hydropower Operation of Reservoirs [Volume 24, Issue 5, 2017, Pages 2294-2306]
  • Azli, Y. Surface modification of biomaterial embedded with pits using die sinker machine [Volume 24, Issue 4, 2017, Pages 1901-1911]

B

  • Babaluo, A.A. n-pentane isomerization over Pt-Al promoted sulfated zirconia nanocatalyst [Volume 24, Issue 3, 2017, Pages 1264-1271]
  • Babri, H.A. Recognizing traffic signs using flexible Discrete Cosine Transform (DCT) grid [Volume 24, Issue 3, 2017, Pages 1384-1394]
  • Bachok, N. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
  • Badkoubeh, A. Fundamental period of vibration for seismic design of concrete shear wall buildings [Volume 24, Issue 3, 2017, Pages 1010-1016]
  • Baghani, M. Developing a finite element beam theory for nanocomposite shape memory polymers with application to sustained release of drugs [Volume 24, Issue 1, 2017, Pages 249-259]
  • Baghbanian, Abdolvahab Phenol Removal from Aqueous Solution by Adsorption Process: Study of The Nanoparticles Performance Prepared from Alo vera and Mesquite (Prosopis) Leaves [Volume 24, Issue 6, 2017, Pages 3041-3052]
  • Bagheri Esfe, Hamed Effects of non-equilibrium condensation on aerodynamics of the flow field in a steam turbine cascade [Volume 24, Issue 2, 2017, Pages 624-634]
  • Bagheripour, M. H. Seismic Wave Scatter Study in Valleys Using Coupled 2D Finite Element Approach and Absorbing Boundaries [Volume 24, Issue 1, 2017, Pages 110-120]
  • Bahadori, M.N. Economic and Environmental Evaluations of Different Operation Alternatives of an Aquifer Thermal Energy Storage in Tehran, Iran [Volume 24, Issue 2, 2017, Pages 610-623]
  • Bahar, Arash Vertical vibration control of suspension bridges subjected to earthquake by Semi-active MR dampers [Volume 24, Issue 2, 2017, Pages 439-451]
  • Baharvand, Hossein Mechanical reinforcement of urinary bladder matrix by electrospun polycaprolactone nanofibers [Volume 24, Issue 6, 2017, Pages 3476-3480]
  • Baheri, Sima Numerical Simulation of non-Newtonian Nanofluids Flow in Passive Injection Micromixers Using Mixture Model [Volume 24, Issue 1, 2017, Pages 211-222]
  • Baheri, Z. Numerical modelling of the mechanical behaviour of steel brace modified by CFRP sheet [Volume 24, Issue 4, 2017, Pages 1883-1888]
  • Balan, Poo Hydro-magnetic mixed convection in a lid-driven cavity with partially thermally active walls [Volume 24, Issue 1, 2017, Pages 153-163]
  • Balic, J. A new optimization algorithm for parameter optimization of nano-finishing processes [Volume 24, Issue 2, 2017, Pages 868-875]
  • Banazadeh, M. Probabilistic seismic hazard analysis using reliability methods [Volume 24, Issue 3, 2017, Pages 933-941]
  • Baniassadi, M. Developing a finite element beam theory for nanocomposite shape memory polymers with application to sustained release of drugs [Volume 24, Issue 1, 2017, Pages 249-259]
  • Baniyaghoob, Sahar H2S Removal Using ZnO/SBA-3: New Synthesis Route and Optimization of Process Parameters [Volume 24, Issue 6, 2017, Pages 3064-3073]
  • Bararnia, Majid Ground Motion Prediction Equation for Inelastic Spectral Displacement in Iran [Volume 24, Issue 1, 2017, Pages 164-182]
  • Bardania, Hassan Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
  • Baricco, Marcello The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
  • Bashiri, Mahdi A capacitated bike sharing location-allocation problem under demand uncertainty using sample average approximation: A greedy Genetic-Particle Swarm Optimization algorithm [Volume 24, Issue 5, 2017, Pages 2567-2580]
  • Bayat, R. Unsteady impulsive oblique stagnation-point flow impinging axisymmetrically on a vertical circular cylinder with mixed convection heat transfer [Volume 24, Issue 4, 2017, Pages 1966-1974]
  • Bayati, B. n-pentane isomerization over Pt-Al promoted sulfated zirconia nanocatalyst [Volume 24, Issue 3, 2017, Pages 1264-1271]
  • Behnia, S. Spintronics in Nano scales: An approach from DNA spin polarization [Volume 24, Issue 6, 2017, Pages 3448-3451]
  • Behzadipour, S. Hand acceleration measurement by Kinect for rehabilitation applications [Volume 24, Issue 1, 2017, Pages 191-201]
  • Beiraghi, H. Effect of record scaling on the behavior of reinforced concrete core-wall buildings subjected to near-fault and far-fault earthquakes [Volume 24, Issue 3, 2017, Pages 884-899]
  • Benzaoui, Ahmed COMPARATIVE STUDY OF THE EFFECT OF TWO TYPE OF RIBS ON THERMAL PERFORMANCE OF SOLAR AIR HEATERS [Volume 24, Issue 5, 2017, Pages 2418-2428]
  • Bhuvaneswari, M. Hydro-magnetic mixed convection in a lid-driven cavity with partially thermally active walls [Volume 24, Issue 1, 2017, Pages 153-163]
  • Bhuvaneswari, M. Chemical reaction, soret and dufour effects on MHD mixed convection stagnation point flow with radiation and slip condition [Volume 24, Issue 2, 2017, Pages 698-706]
  • Bilik, J. Kinetics of reduction and oxidation reactions during pyrometallurgical metal extraction [Volume 24, Issue 4, 2017, Pages 2009-2018]
  • Binesh, Seyed Mohammad Adaptive mesh-free lower bound limit analysis using non-linear programming [Volume 24, Issue 6, 2017, Pages 2793-2802]
  • Bingol, B.N. Data Envelopment Analysis (DEA) Approach for Making the Bid/No Bid Decision: A Case Study in a Turkish Construction Contracting Company [Volume 24, Issue 2, 2017, Pages 497-511]
  • Bin Shafie, Sharidan MHD boundary layer flow of an incompressible upper convected Maxwell fluid by Optimal Homotopy Asymptotic Method. [Volume 24, Issue 1, 2017, Pages 202-210]
  • Biswas, A. Application of Petrov-Galerkin finite element method to shallow water waves model: Modified Korteweg-de Vries equation [Volume 24, Issue 3, 2017, Pages 1148-1159]
  • Bonakdari, H. Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel [Volume 24, Issue 3, 2017, Pages 1000-1009]
  • Bong, Ch. Hin Joo Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel [Volume 24, Issue 3, 2017, Pages 1000-1009]
  • Borhani, S. Development of a Cournot-oligopoly model for competition of multi-product supply chains under government supervision [Volume 24, Issue 3, 2017, Pages 1519-1532]
  • Borozova, S. Kinetics of reduction and oxidation reactions during pyrometallurgical metal extraction [Volume 24, Issue 4, 2017, Pages 2009-2018]
  • Boulemtafes - Boukadoum, Amel COMPARATIVE STUDY OF THE EFFECT OF TWO TYPE OF RIBS ON THERMAL PERFORMANCE OF SOLAR AIR HEATERS [Volume 24, Issue 5, 2017, Pages 2418-2428]
  • Bozorgmehry Boozarjomehry, R. Characterization of three-phase flow in porous media using the ensemble Kalman filter [Volume 24, Issue 3, 2017, Pages 1281-1301]
  • B. Rahimi, A. Unsteady impulsive oblique stagnation-point flow impinging axisymmetrically on a vertical circular cylinder with mixed convection heat transfer [Volume 24, Issue 4, 2017, Pages 1966-1974]

C

  • Cárdenas-Barrón, Leopoldo Eduardo Two-warehouse inventory model for deteriorating items with imperfect quality under the conditions of permissible delay in payments [Volume 24, Issue 1, 2017, Pages 390-412]
  • Cárdenas-Barrón, Leopoldo Eduardo A simple solution procedure to solve the multi-delivery policy into economic production lot size problem with partial rework [Volume 24, Issue 5, 2017, Pages 2640-2644]
  • Canpolat, Fethullah Effect Of Curing Conditions On Strength And Durability Of High-Performance Concrete [Volume 24, Issue 2, 2017, Pages 576-583]
  • Castellero, Alberto The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
  • Celegato, Federica The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
  • Ceribasi, G. Application of trend analysis and artificial neural networks methods: The case of Sakarya River [Volume 24, Issue 3, 2017, Pages 993-999]
  • Chakraborty, S. Seismic performance of reinforced concrete building in Guwahati city, northeast India [Volume 24, Issue 4, 2017, Pages 1821-1833]
  • Chambari, A. Solving the redundancy allocation problem of k-out-of-n with non-exponential repairable components using optimization via simulation approach [Volume 24, Issue 3, 2017, Pages 1547-1560]
  • Chang, Shuenn-Yih A One-Parameter Controlled Dissipative Unconditionally Stable Explicit Algorithm for Time History Analysis [Volume 24, Issue 5, 2017, Pages 2307-2319]
  • Charchi Aghdam, N. n-pentane isomerization over Pt-Al promoted sulfated zirconia nanocatalyst [Volume 24, Issue 3, 2017, Pages 1264-1271]
  • Charlang Kiani, Kiarash The Application of Suction and Blowing in Performance Improvement of Transonic Airfoils with Shock Control Bump [Volume 24, Issue 1, 2017, Pages 274-292]
  • Chatrsimab, S. Using integrated method to rank the power system contingency [Volume 24, Issue 3, 2017, Pages 1373-1383]
  • Chen, Lin Multidimensional Knapsack Problem Based on Uncertain Measure [Volume 24, Issue 5, 2017, Pages 2527-2539]
  • Chen, Long Research on the inventory control of the remanufacturing reverse logistics based on the quantitative examination [Volume 24, Issue 2, 2017, Pages 741-750]
  • Chen, Ping-Shun Multi-Objective Optimization of Green Supply Chain Network Designs for Transportation Mode Selection [Volume 24, Issue 6, 2017, Pages 3355-3370]
  • Cheng, Li Multidimensional Knapsack Problem Based on Uncertain Measure [Volume 24, Issue 5, 2017, Pages 2527-2539]
  • Cheraghi, I. Design of an innovative construction model for supply chain management by measuring agility and cost of quality: An empirical study [Volume 24, Issue 5, 2017, Pages 2515-2526]
  • Christiansen, Gunna Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
  • Chung, Kun-Jen A simple solution procedure to solve the multi-delivery policy into economic production lot size problem with partial rework [Volume 24, Issue 5, 2017, Pages 2640-2644]
  • COBAN, Meral INVESTIGATION OF THE EFFECTS OF CARBONIC AGENT AND NANOCLAY ON THE PROPERTIES OF THE POLYLACTIC ACID BASED NANOCOMPOSITES [Volume 24, Issue 6, 2017, Pages 3074-3080]
  • Costa, A. M. Wind turbines design corrections for next Galicia climatic conditions [Volume 24, Issue 3, 2017, Pages 926-932]
  • Criado-Aldeanueva, Francisco On the solution of a contact problem for a rhombus weakened with a full-strength hole [Volume 24, Issue 1, 2017, Pages 183-190]

D

  • Daaou Nedjari, Hafida COMPARATIVE STUDY OF THE EFFECT OF TWO TYPE OF RIBS ON THERMAL PERFORMANCE OF SOLAR AIR HEATERS [Volume 24, Issue 5, 2017, Pages 2418-2428]
  • Dalcalı, Adem Optimum Pole Arc Offset in Permanent Magnet Synchronous Generators for Obtaining Least Voltage Harmonics [Volume 24, Issue 6, 2017, Pages 3223-3230]
  • Daliri, M. On the oscillatory frequency of the carbon nanotube-based nanothermometers [Volume 24, Issue 3, 2017, Pages 1615-1625]
  • Dalvand, A. Increasing the flexural capacity of geopolymer concrete beams using partially deflection hardening cement-based layers: Numerical study [Volume 24, Issue 6, 2017, Pages 2832-2844]
  • Daneshmand, Morteza A Robust Proportion-Preserving Composite Objective Function for Scale-Invariant Multi-Objective Optimization [Volume 24, Issue 6, 2017, Pages 2977-2991]
  • DaneshPajooh, Hosein High frequency vibrations of quartz crystals subject to initial thermo-mechanical bias [Volume 24, Issue 2, 2017, Pages 684-697]
  • Darijani, Hossein On a Conceptual Method for the Extraction of Wind Energy Using Airfoil and Linear Generator [Volume 24, Issue 2, 2017, Pages 597-609]
  • Das, Satyajit Family of harmonic aggregation operators under inuitionistic fuzzy environment [Volume 24, Issue 6, 2017, Pages 3308-3323]
  • Dauren, Omar Integrated system for the use of solar energy in the animal farm [Volume 24, Issue 6, 2017, Pages 3213-3222]
  • Davoudpour, H. A Benders decomposition algorithm for multi-factory scheduling problem with batch delivery [Volume 24, Issue 2, 2017, Pages 823-833]
  • Dehghani, M. Detecting shoreline changes in Chabahar Bay by processing satellite images [Volume 24, Issue 4, 2017, Pages 1802-1809]
  • Dehghani Tafti, Marzieh Synthesis of quinoxalines promoted by eco-friendly nano-kaoline/BF3/Fe3O4 nano-catalyst under grinding condition [Volume 24, Issue 6, 2017, Pages 3014-3021]
  • Denisov, E. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]
  • Derakhshi, M. Terahertz Plasmonic Switch Based on Periodic Array of Graphene/Silicon [Volume 24, Issue 6, 2017, Pages 3452-3457]
  • Dezfoulian, Hamid Reza A new model to optimize the knowledge exchange in industrial cluster: A case study of Semnan plaster production industrial cluster [Volume 24, Issue 2, 2017, Pages 834-846]
  • Dhinakaran, G. Effect of Ultra-Fine SiO2 and Metakaolin on High Strength Concrete in Aggressive Environment [Volume 24, Issue 1, 2017, Pages 1-10]
  • Didari, Hamid Investigating the viscoelastic fluid behavior in hollow fiber membrane fabrication process using Giesekus' model [Volume 24, Issue 6, 2017, Pages 3053-3063]
  • Ding, N. Effects of edge rate of the designed line markings on the following time headway [Volume 24, Issue 4, 2017, Pages 1770-1778]
  • Dogan, E. Application of trend analysis and artificial neural networks methods: The case of Sakarya River [Volume 24, Issue 3, 2017, Pages 993-999]
  • Dolatabadi, R. Developing a finite element beam theory for nanocomposite shape memory polymers with application to sustained release of drugs [Volume 24, Issue 1, 2017, Pages 249-259]
  • Dolati, Abolghasem Investigation of carbon phase evolutions in titanium nitride-carbon nanocomposites prepared in supercritical benzene with respect to their lithium storage capacity [Volume 24, Issue 6, 2017, Pages 3481-3490]
  • Dolati, Abolghasem The effect of current density on microstructural homogeneity, hardness, fracture toughness and electrochemical behavior of electrodeposited Cu-0.5Co/WC nano-composite coating [Volume 24, Issue 6, 2017, Pages 3505-3511]
  • Doniavi, A. Development of Supply Chain Strategy in Iranian Automotive Industry Based on System Dynamics and Game Theory [Volume 24, Issue 6, 2017, Pages 3345-3354]
  • Doostmohammadi, A. Copper-doped and copper-free bioactive glass nanopowders cytotoxicity and antibacterial activity assessment [Volume 24, Issue 3, 2017, Pages 1706-1716]
  • Durali, Mohammad Multilevel optimization of profile of splitter blades in the impeller of a centrifugal compressor [Volume 24, Issue 2, 2017, Pages 707-714]

E

  • Ebrahimi, Mohsen Axisymmetric active lateral earth pressure for c-Φ soils using the stress characteristics method [Volume 24, Issue 5, 2017, Pages 2332-2345]
  • Ebtehaj, I. Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel [Volume 24, Issue 3, 2017, Pages 1000-1009]
  • E. Estekanchi, H. Application of damage spectra as seismic intensity measures in endurance time method for steel moment-resisting frames [Volume 24, Issue 1, 2017, Pages 53-64]
  • E. Estekanchi, Homayoon Assessment of Collapse Modes in Reinforced Concrete Frames Considering Record-to-Record and Modeling Uncertainties [Volume 24, Issue 5, 2017, Pages 2213-2226]
  • Eftekhari-Sis, Bagher Pyridylmethylaminoacetic acid functionalized Fe3O4 magnetic nanorods as an efficient catalyst for the synthesis of 2-aminochromene and 2-aminopyran derivatives [Volume 24, Issue 6, 2017, Pages 3022-3031]
  • Eghbali, Mahdi Reliable seismic collapse assessment of short-period structures using new proxies for ground motion record selection [Volume 24, Issue 5, 2017, Pages 2283-2293]
  • Eghlidos, T. A lattice-based changeable threshold multi-secret sharing scheme and its application to threshold cryptography [Volume 24, Issue 3, 2017, Pages 1448-1457]
  • Ehsani, M. Experimental study on behavior of soil-waste tire mixtures [Volume 24, Issue 1, 2017, Pages 65-71]
  • Ejtemaei, M. n-pentane isomerization over Pt-Al promoted sulfated zirconia nanocatalyst [Volume 24, Issue 3, 2017, Pages 1264-1271]
  • Elaraby, Ahmed A generalized entropy-based two-phase threshold algorithm for noisy medical image edge detection [Volume 24, Issue 6, 2017, Pages 3247-3256]
  • Emami, F. On the improvement of steel plate shear wall behavior, using energy absorbent element [Volume 24, Issue 1, 2017, Pages 11-18]
  • Emami, Saeed A fuzzy dynamic multi-objective, multi-item model by considering customer satisfaction in supply chain [Volume 24, Issue 5, 2017, Pages 2623-2639]
  • Emdad, Homayoon Piezoelectric energy harvesting from vertical piezoelectric beams in the horizontal fluid flows [Volume 24, Issue 5, 2017, Pages 2396-2405]
  • Erdem, Ayhan Applying a multi sensor system to predict and simulate the tool wear using of artificial neural networks [Volume 24, Issue 6, 2017, Pages 2864-2874]
  • Erni, Daniel Comparison between Periodicity and Randomness from an Effective Refractive Index Point of View; Applicable to thin-film Solar Cells [Volume 24, Issue 6, 2017, Pages 3536-3541]
  • Eshghi, Kourosh Train Timetabling on double track and multiple station capacity railway with useful upper and lower bounds [Volume 24, Issue 6, 2017, Pages 3324-3344]
  • Eshraghi, J. Light Oil – Gas Two-Phase Flow Pattern Identification in Different Pipe Orientations: An Experimental Approach [Volume 24, Issue 5, 2017, Pages 2445-2456]
  • Eskandari, Hamidreza Decreasing the Crane Working Time in Retrieving the Containers from a Bay [Volume 24, Issue 1, 2017, Pages 309-318]
  • Eskandarzadeh, Mohammad Fatigue behavior of nano-grained pure copper processed by equal channel angular rolling [Volume 24, Issue 2, 2017, Pages 656-661]
  • Eslami, A. Study of pile behavior by improvement of confining soils using frustum confining vessel [Volume 24, Issue 4, 2017, Pages 1874-1882]
  • Eslami, J. Numerical simulation of the effect of visitor's movement on bacteria-carrying particles distribution in hospital isolation room [Volume 24, Issue 3, 2017, Pages 1160-1170]
  • Eslami, Mostafa An analytical method for finding exact solitary wave solutions ofthe coupled (2 1)-dimensional Painlevé Burgers equation [Volume 24, Issue 2, 2017, Pages 715-726]
  • Eslami Saray, Mohammad Ali Airflow patterns in a 3D model of the human acinus [Volume 24, Issue 5, 2017, Pages 2379-2386]
  • Eslampanah Seyedi, Hadieh Alsadat Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
  • Esmaeili, M. Discrete mass modeling for dynamic response of buildings in the vicinity of railway tracks due to train-induced ground vibrations [Volume 24, Issue 4, 2017, Pages 1922-1939]
  • ESMAEILI, SHAHROKH THE NUMERICAL SOLUTION OF THE BAGLEY-TORVIK EQUATION BY EXPONENTIAL INTEGRATORS [Volume 24, Issue 6, 2017, Pages 2941-2951]
  • Esmaili, Z. Degradation of furfural in contaminated water by titanium and iron oxide nanophotocatalysts based on the natural zeolite (clinoptilolite) [Volume 24, Issue 3, 2017, Pages 1221-1229]
  • Estekanchi, H.E. Seismic performance evaluation of jacket-type offshore platforms using endurance time method considering soil-pile-superstructure interaction [Volume 24, Issue 4, 2017, Pages 1843-1854]
  • Etefagh, R. Synthesis and antimicrobial properties of ZnO/PVA, CuO/PVA, and TiO2/PVA nanocomposites [Volume 24, Issue 3, 2017, Pages 1717-1723]
  • Evdokimov, Yu.K. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]

F

  • Fadaie, Sina Stability of Supported Vertical Cuts in Granular Matters in Presence of the Seepage Flow by a Semi-Analytical Approach [Volume 24, Issue 2, 2017, Pages 537-550]
  • Fakhraei, J. Chaotic behaviors of a ground vehicle oscillating system with passengers [Volume 24, Issue 3, 2017, Pages 1051-1068]
  • Fallahnezhad, M.S. Economic design of cumulative count of conforming control charts based on average number of inspected items [Volume 24, Issue 1, 2017, Pages 330-341]
  • Fallah Sanami, Sahar A new mathematical model for integrated production planning and scheduling problem in capacitated flexible flow shop with sequence-dependent setups [Volume 24, Issue 5, 2017, Pages 2501-2514]
  • Farahani, M. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
  • Farahani, M. Experimental Investigation of Shock Waves Formation and Development Process in Transonic Flow [Volume 24, Issue 5, 2017, Pages 2457-2465]
  • Faramarzi, V. Petahertz-frequency plasmons in graphene nanopore and their application to nanoparticle sensing [Volume 24, Issue 3, 2017, Pages 1669-1677]
  • Faramarzi, Vahid A biosensor based on plasmonic wave excitation with diffractive grating structure [Volume 24, Issue 6, 2017, Pages 3441-3447]
  • Farbod, F. Enhanced electro-oxidation of urea based on nickel nanoparticle decorated reduced graphene oxide/PEDOT:PSS composite [Volume 24, Issue 3, 2017, Pages 1678-1685]
  • Farhadian, M. Degradation of furfural in contaminated water by titanium and iron oxide nanophotocatalysts based on the natural zeolite (clinoptilolite) [Volume 24, Issue 3, 2017, Pages 1221-1229]
  • Farid, M. Piezoelectric energy harvesting from vertical piezoelectric beams in the horizontal fluid flows [Volume 24, Issue 5, 2017, Pages 2396-2405]
  • Farrahi, G.H. A new technique of the irst and second limits" for wagon maintenance in railway tracks consisting of sharp curves based on the empirical study of wheel wear [Volume 24, Issue 3, 2017, Pages 1171-1180]
  • Farrokhi-Asl, Hamed Integrated Dynamic Cell Formation-Production Planning: A New Mathematical Model [Volume 24, Issue 5, 2017, Pages 2550-2566]
  • Fasihi, M. The Effect of Outer Diameter of Multi-Walled Carbon Nanotubes on Fracture Behavior of Epoxy Adhesives [Volume 24, Issue 6, 2017, Pages 2952-2962]
  • Fatemi Ghomi, S.M.T. Model and optimization of the multi-objective single-buyer multi-vendor integrated inventory problem with multiple quantity discounts [Volume 24, Issue 2, 2017, Pages 856-867]
  • Fatemi Ghomi, S.M.T. A novel deterministic model for simultaneous weekly assignment and scheduling decision-making in operating theaters [Volume 24, Issue 4, 2017, Pages 2035-2049]
  • Fathi, D. Terahertz Plasmonic Switch Based on Periodic Array of Graphene/Silicon [Volume 24, Issue 6, 2017, Pages 3452-3457]
  • Fathi, D. Graphene Based Nano Bio-sensor: Sensitivity Improvement [Volume 24, Issue 6, 2017, Pages 3531-3535]
  • Fathizadeh, S. Spintronics in Nano scales: An approach from DNA spin polarization [Volume 24, Issue 6, 2017, Pages 3448-3451]
  • Fattahi, M. Experimental study of rheological properties of aphron based drilling Fluids and their effects on formation damage [Volume 24, Issue 3, 2017, Pages 1241-1252]
  • Fazel Zarand, M.H. A prototype-based classification using extended imperialist competitive algorithm [Volume 24, Issue 4, 2017, Pages 2062-2081]
  • Fazel Zarandi, Mohammad Hossein Generalized Heat Transfer and Entropy Generation of Stratified Air-Water Flow in Entrance of a Mini-channel [Volume 24, Issue 5, 2017, Pages 2407-2417]
  • Fazli Besheli, Shabnam A fuzzy dynamic multi-objective, multi-item model by considering customer satisfaction in supply chain [Volume 24, Issue 5, 2017, Pages 2623-2639]
  • FEDGHOUCHE, Ferhat Cost optimum design of doubly reinforced high strength concrete T-beams [Volume 24, Issue 2, 2017, Pages 476-486]
  • Feizi, M.M. Discrete mass modeling for dynamic response of buildings in the vicinity of railway tracks due to train-induced ground vibrations [Volume 24, Issue 4, 2017, Pages 1922-1939]
  • Feizi Chekab, Mohammad A. Ferrofluid appendages: Ferrofluid vortex container - A numerical investigation of free surface shape and vortex flow in ferrofluids for different relative densities [Volume 24, Issue 6, 2017, Pages 2929-2940]
  • Fiza, Mehreen MHD boundary layer flow of an incompressible upper convected Maxwell fluid by Optimal Homotopy Asymptotic Method. [Volume 24, Issue 1, 2017, Pages 202-210]
  • Fotouhi, B. Petahertz-frequency plasmons in graphene nanopore and their application to nanoparticle sensing [Volume 24, Issue 3, 2017, Pages 1669-1677]
  • Fotouhi, Bashir A biosensor based on plasmonic wave excitation with diffractive grating structure [Volume 24, Issue 6, 2017, Pages 3441-3447]

G

  • Ganji, F. Minimizing maximum earliness in single-machine scheduling with flexible maintenance time [Volume 24, Issue 4, 2017, Pages 2082-2094]
  • Garcia-Bustelo, E.J. Wind turbines design corrections for next Galicia climatic conditions [Volume 24, Issue 3, 2017, Pages 926-932]
  • Garg, Harish Some improved interactive aggregation operators under interval-valued intuitionistic fuzzy environment and its application to decision making process [Volume 24, Issue 5, 2017, Pages 2581-2604]
  • Genç, Sıdıka Toxic Effects of Chronic Feeding with Food Azo Dyes on Drosophila melanogaster Oregon R [Volume 24, Issue 6, 2017, Pages 3081-3086]
  • Ghadimi, Parviz Numerical Assessment of turbulence effect on Forces, Spray parameters, and secondary impact in wedge water entry problem using k-ε method [Volume 24, Issue 1, 2017, Pages 223-236]
  • Ghadimi, Parviz Ferrofluid appendages: Ferrofluid vortex container - A numerical investigation of free surface shape and vortex flow in ferrofluids for different relative densities [Volume 24, Issue 6, 2017, Pages 2929-2940]
  • Ghaebi, Hadi Economic and Environmental Evaluations of Different Operation Alternatives of an Aquifer Thermal Energy Storage in Tehran, Iran [Volume 24, Issue 2, 2017, Pages 610-623]
  • Ghaemian, M. Multi-criteria optimization of concrete arch dams [Volume 24, Issue 4, 2017, Pages 1810-1820]
  • Ghaemian, Mohsen Stability analysis of arch dam abutments due to seismic loading [Volume 24, Issue 2, 2017, Pages 467-475]
  • Ghafari, Amir Mohammad Mechanical reinforcement of urinary bladder matrix by electrospun polycaprolactone nanofibers [Volume 24, Issue 6, 2017, Pages 3476-3480]
  • Ghaffarpasand, O. Effect of alternating magnetic field on unsteady MHD mixed convection and entropy generation of ferro fluid in a linearly heated two-sided cavity [Volume 24, Issue 3, 2017, Pages 1108-1125]
  • Ghaffarpasand, O. Natural convection and entropy generation of ultrafine atmospheric aerosols in the presence of hydrodynamic partial slip and thermal radiation due to solar energy [Volume 24, Issue 3, 2017, Pages 1686-1705]
  • Ghahremani, Amirreza Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
  • Ghalebsaz Jeddi, B. Minimizing maximum earliness in single-machine scheduling with flexible maintenance time [Volume 24, Issue 4, 2017, Pages 2082-2094]
  • Ghanbari Alamooti, E. Stability analysis of dry sandy slopes adjacent to dynamic compaction process [Volume 24, Issue 1, 2017, Pages 82-95]
  • Ghane Golmohamadi, Farzin A biosensor based on plasmonic wave excitation with diffractive grating structure [Volume 24, Issue 6, 2017, Pages 3441-3447]
  • Ghanian, Mohammad Hossein Mechanical reinforcement of urinary bladder matrix by electrospun polycaprolactone nanofibers [Volume 24, Issue 6, 2017, Pages 3476-3480]
  • Gharraei, Reza Numerical Simulation of non-Newtonian Nanofluids Flow in Passive Injection Micromixers Using Mixture Model [Volume 24, Issue 1, 2017, Pages 211-222]
  • Ghaseminejad, Vali Evaluation of behavior of bucket foundations under pure loading [Volume 24, Issue 6, 2017, Pages 2803-2816]
  • Ghashghaei, Reza Maximum Multivariate Exponentially Weighted Moving Average and Maximum Multivariate Cumulative Sum Control Charts for Simultaneous Monitoring of Mean and Variability of Multivariate Multiple Linear Regression Profiles [Volume 24, Issue 5, 2017, Pages 2605-2622]
  • Ghayour, M. Chaotic behaviors of a ground vehicle oscillating system with passengers [Volume 24, Issue 3, 2017, Pages 1051-1068]
  • Ghenaatian, H.R. Structural and electronic properties of alumaphosphinine complexes with metal ions: A theoretical study [Volume 24, Issue 3, 2017, Pages 1181-1188]
  • Ghezavati, J. Various types of ceramics used in radome: A review [Volume 24, Issue 3, 2017, Pages 1136-1147]
  • Ghiyasvand, Mehdi Adjusting an Infeasible Network by Minimizing the Sum of the Violation Costs [Volume 24, Issue 1, 2017, Pages 319-329]
  • Ghodrati Amiri, Gholamreza Reliable seismic collapse assessment of short-period structures using new proxies for ground motion record selection [Volume 24, Issue 5, 2017, Pages 2283-2293]
  • Ghodrati Amiri, Golamreza Ground Motion Prediction Equation for Inelastic Spectral Displacement in Iran [Volume 24, Issue 1, 2017, Pages 164-182]
  • Ghodsian, Masoud Experimental study on relation between scour and complex 3D flow field [Volume 24, Issue 6, 2017, Pages 2696-2711]
  • Ghorbani, M. pH-Responsive Nanostructured Polyaniline Capsules for Self-Healing Corrosion Protection: The Influence of Capsule Concentration [Volume 24, Issue 6, 2017, Pages 3512-3520]
  • Ghorbani, Mohammad Investigation of carbon phase evolutions in titanium nitride-carbon nanocomposites prepared in supercritical benzene with respect to their lithium storage capacity [Volume 24, Issue 6, 2017, Pages 3481-3490]
  • Ghorbanian, Ali A Multi-Objective Multi-State Degraded System to Optimize Maintenance/Repair Costs and System Availability [Volume 24, Issue 1, 2017, Pages 355-363]
  • Ghoreyshi, A.A. Enhancement of hydrogen storage on multi-walled carbon nanotube through KOH activation and nickel nanoparticle deposition [Volume 24, Issue 3, 2017, Pages 1230-1240]
  • Ghosh, S. Seismic performance of reinforced concrete building in Guwahati city, northeast India [Volume 24, Issue 4, 2017, Pages 1821-1833]
  • Ghotbi, A. Dynamic behavior of large-diameter piles with considering liquefaction under clay layer [Volume 24, Issue 6, 2017, Pages 2665-2683]
  • Ghotbi, Cyrus The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
  • Goh, Joan New High Accuracy Non-polynomial Spline Group Explicit Iterative Method for Two Dimensional Elliptic Boundary Value Problems [Volume 24, Issue 6, 2017, Pages 3181-3192]
  • Goharimanesh, Masoud Improving Lateral Dynamics of Vehicle Using Direct Yaw Moment Controller Based on Quantitative Feedback Theory [Volume 24, Issue 2, 2017, Pages 662-672]
  • Golafshani, A.A. Seismic performance evaluation of jacket-type offshore platforms using endurance time method considering soil-pile-superstructure interaction [Volume 24, Issue 4, 2017, Pages 1843-1854]
  • Golbafian, V. Economic design of cumulative count of conforming control charts based on average number of inspected items [Volume 24, Issue 1, 2017, Pages 330-341]
  • Golestani, A. Effect of wind tunnel wall porosity on the flow around an oscillating airfoil at transonic speeds [Volume 24, Issue 3, 2017, Pages 1069-1076]
  • Golkhoo, Farzaneh Modeling Labor Productivity in Construction Projects using Hybrid SD-DES Approach [Volume 24, Issue 6, 2017, Pages 2752-2761]
  • Golmezerji, R. Simultaneous Optimization of Joint Edge Geometry and Process Parameters in Gas Metal Arc Welding Using Integrated ANN - PSO Approach [Volume 24, Issue 1, 2017, Pages 260-273]
  • Golozar, Matin Theoretical and computational investigation of optimal wall shear stress in bifurcations: a generalization of Murray’s law [Volume 24, Issue 5, 2017, Pages 2387-2395]
  • Golpîra, Hêriş A multi-objective multi-echelon green supply chain network design problem with risk-averse retailers in an uncertain environment [Volume 24, Issue 1, 2017, Pages 413-423]
  • Golshokooh, S. Investigating the effect of hybrid silica nanoparticles- copolymer on increasing oil recovery in a three dimensional porous media [Volume 24, Issue 6, 2017, Pages 3466-3475]
  • Golzar, F.G. Stress Analyses in Single Deck and Double Deck Floating Roofs Subjected to Earthquake Ground Motions [Volume 24, Issue 2, 2017, Pages 727-739]
  • Gong, Dah-Chuan Multi-Objective Optimization of Green Supply Chain Network Designs for Transportation Mode Selection [Volume 24, Issue 6, 2017, Pages 3355-3370]
  • Gonzalez-Garcia, Y. pH-Responsive Nanostructured Polyaniline Capsules for Self-Healing Corrosion Protection: The Influence of Capsule Concentration [Volume 24, Issue 6, 2017, Pages 3512-3520]
  • Guha, Debashree Family of harmonic aggregation operators under inuitionistic fuzzy environment [Volume 24, Issue 6, 2017, Pages 3308-3323]

H

  • Habibi, Asiyeh Fatigue behavior of nano-grained pure copper processed by equal channel angular rolling [Volume 24, Issue 2, 2017, Pages 656-661]
  • Haddadpour, H. Impact crushing behavior of foam-filled paraboloid shells using numerical and experimental methods [Volume 24, Issue 4, 2017, Pages 1912-1921]
  • Hadianfard, M.A. Strength and elastic moduli of a concrete bridge using advanced nondestructive techniques [Volume 24, Issue 3, 2017, Pages 942-952]
  • Hadidoolabi, Mostafa Computational Investigation of Vortex Breakdown over a Pitching Delta Wing at Supersonic Speeds [Volume 24, Issue 6, 2017, Pages 2915-2928]
  • Hadji Molana, Mohammad Optimizing Reliability and Cost of system for Aggregate Production Planning in Supply Chain [Volume 24, Issue 6, 2017, Pages 3394-3408]
  • Hafezalkotob, A. Development of a Cournot-oligopoly model for competition of multi-product supply chains under government supervision [Volume 24, Issue 3, 2017, Pages 1519-1532]
  • Haghi, M. A novel deterministic model for simultaneous weekly assignment and scheduling decision-making in operating theaters [Volume 24, Issue 4, 2017, Pages 2035-2049]
  • Haghiabi, A.H. Estimation of scour downstream of a ski-jump bucket using the multivariate adaptive regression splines [Volume 24, Issue 4, 2017, Pages 1789-1801]
  • Hajiani Boushehrian, Alireza Investigating the experimental behavior of the reinforcements effect on the railway traverse under the dynamic load [Volume 24, Issue 5, 2017, Pages 2253-2261]
  • Hajilouy Benisi, Ali Multilevel optimization of profile of splitter blades in the impeller of a centrifugal compressor [Volume 24, Issue 2, 2017, Pages 707-714]
  • Hajinezhad, Ahmad Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
  • Hajipour, V. A prototype-based classification using extended imperialist competitive algorithm [Volume 24, Issue 4, 2017, Pages 2062-2081]
  • Hajizadeh, Sajad Evaluation of planing craft maneuverability using mathematical modeling under the action of the rudder [Volume 24, Issue 1, 2017, Pages 293-301]
  • Haleh, Hassan Energy-conscious dynamic sequencing method for dual command cycle unit-load multiple-rack automated storage and retrieval systems [Volume 24, Issue 6, 2017, Pages 3371-3393]
  • Hallaj, Diako Credibility-Based Fuzzy Mathematical Programming for Bi-Objective Capacitated Partial Facility Interdiction with Fortification and Demand Outsourcing Model [Volume 24, Issue 2, 2017, Pages 778-793]
  • Halvaei Niasar, A. A novel time varying dynamic modeling for hysteresis motor [Volume 24, Issue 3, 2017, Pages 1395-1409]
  • Hamedi, Mohsen High frequency vibrations of quartz crystals subject to initial thermo-mechanical bias [Volume 24, Issue 2, 2017, Pages 684-697]
  • Hamidi, A. Stability analysis of dry sandy slopes adjacent to dynamic compaction process [Volume 24, Issue 1, 2017, Pages 82-95]
  • Hanafizadeh, P. Light Oil – Gas Two-Phase Flow Pattern Identification in Different Pipe Orientations: An Experimental Approach [Volume 24, Issue 5, 2017, Pages 2445-2456]
  • Hanumanaika, Rajanaika Synthesis of Nα-protected formamides from amino acids using MgO nano catalyst: Study of molecular docking and antibacterial activity [Volume 24, Issue 6, 2017, Pages 3002-3013]
  • Haqverdi, Shiva Pyridylmethylaminoacetic acid functionalized Fe3O4 magnetic nanorods as an efficient catalyst for the synthesis of 2-aminochromene and 2-aminopyran derivatives [Volume 24, Issue 6, 2017, Pages 3022-3031]
  • Hasani, H. Seismic performance evaluation of jacket-type offshore platforms using endurance time method considering soil-pile-superstructure interaction [Volume 24, Issue 4, 2017, Pages 1843-1854]
  • Hashemi, S. DiReT: An effective discriminative dimensionality reduction approach for multi-source transfer learning [Volume 24, Issue 3, 2017, Pages 1303-1311]
  • Hashemi Golpayegani, Mohammad Reza Poincaré Section based Biomarkers of Hemispheric Asymmetry, applied to Autism Spectrum Disorder [Volume 24, Issue 6, 2017, Pages 3257-3267]
  • Hassani, Nemat Ground Motion Prediction Equation for Inelastic Spectral Displacement in Iran [Volume 24, Issue 1, 2017, Pages 164-182]
  • Hassannayebi, Erfan An integrated train scheduling and infrastructure development model in railway networks [Volume 24, Issue 6, 2017, Pages 3409-3422]
  • Hassanzadeh Azami, Roozbeh Ultraviolet and Visible Upconversion Emissions in Er3+-Yb3+ Doped Titanium Dioxide Nanopowder under the 980 nm Laser Diode Excitation [Volume 24, Issue 6, 2017, Pages 3500-3504]
  • Hatami, F. Numerical modelling of the mechanical behaviour of steel brace modified by CFRP sheet [Volume 24, Issue 4, 2017, Pages 1883-1888]
  • Hatefi, Mohammad Ali Developing Column Generation Approach to Solve the Rectangular Two-dimensional Single Knapsack Problem [Volume 24, Issue 6, 2017, Pages 3287-3296]
  • HAZER, Seda INVESTIGATION OF THE EFFECTS OF CARBONIC AGENT AND NANOCLAY ON THE PROPERTIES OF THE POLYLACTIC ACID BASED NANOCOMPOSITES [Volume 24, Issue 6, 2017, Pages 3074-3080]
  • Hebrani, Paria Poincaré Section based Biomarkers of Hemispheric Asymmetry, applied to Autism Spectrum Disorder [Volume 24, Issue 6, 2017, Pages 3257-3267]
  • Heidari, M. Experimental study of rheological properties of aphron based drilling Fluids and their effects on formation damage [Volume 24, Issue 3, 2017, Pages 1241-1252]
  • Heidarzadeh, S. Development of Supply Chain Strategy in Iranian Automotive Industry Based on System Dynamics and Game Theory [Volume 24, Issue 6, 2017, Pages 3345-3354]
  • Hekmatzadeh, M. Investigating the effect of hybrid silica nanoparticles- copolymer on increasing oil recovery in a three dimensional porous media [Volume 24, Issue 6, 2017, Pages 3466-3475]
  • Hemmati, M. Solving the redundancy allocation problem of k-out-of-n with non-exponential repairable components using optimization via simulation approach [Volume 24, Issue 3, 2017, Pages 1547-1560]
  • Hesam, E. Optimization of magnetic devices using Surface Current Method (SCM) [Volume 24, Issue 3, 2017, Pages 1345-1352]
  • Heydari, Soroush Modal Analysis of Two-Dimensional Beams Using Parallel Finite Element Method [Volume 24, Issue 6, 2017, Pages 2762-2775]
  • Hojjati, S. H. The objective design of triangular bucket for dam's spillway using Non-dominated Sorting Genetic Algorithm II: NSGA-II [Volume 24, Issue 1, 2017, Pages 19-27]
  • Hojjati, S.H. The objective design of triangular bucket for dam's spillway using Non-dominated Sorting Genetic Algorithm II: NSGA-II [Volume 24, Issue 1, 2017, Pages 19-27]
  • Hooshangi-Tabrizi, P. A novel deterministic model for simultaneous weekly assignment and scheduling decision-making in operating theaters [Volume 24, Issue 4, 2017, Pages 2035-2049]
  • Hoseinzadeh, M.R. An Anisotropic Multi-plane Elastic-Damage Model with Axial and Shear Damage and Its Application to Concrete Behavior [Volume 24, Issue 5, 2017, Pages 2202-2212]
  • Hosseini, A. Enhancement of hydrogen storage on multi-walled carbon nanotube through KOH activation and nickel nanoparticle deposition [Volume 24, Issue 3, 2017, Pages 1230-1240]
  • Hosseini, A.S. Synthesis and antimicrobial properties of ZnO/PVA, CuO/PVA, and TiO2/PVA nanocomposites [Volume 24, Issue 3, 2017, Pages 1717-1723]
  • Hosseini, Mir Saber Time difference of arrival estimation of sound source using Cross Correlation and modified maximum likelihood weighting function [Volume 24, Issue 6, 2017, Pages 3268-3279]
  • Hosseini, S.A.A. Impact crushing behavior of foam-filled paraboloid shells using numerical and experimental methods [Volume 24, Issue 4, 2017, Pages 1912-1921]
  • Hosseini, S.A.H. An analytical solution for bending, buckling, and free vibration of FG nanobeam lying on Winkler-Pasternak elastic foundation using different nonlocal higher order shear deformation beam theories [Volume 24, Issue 3, 2017, Pages 1635-1653]
  • Hosseini, Sayed Jalil Simulating FRP Debonding From Concrete Surface in FRP Strengthened RC Beams: A Case Study [Volume 24, Issue 2, 2017, Pages 452-466]
  • Hosseini-Moghadam, M. Selection and scaling of spectrum-compatible ground motion records using hybrid coded genetic algorithms [Volume 24, Issue 3, 2017, Pages 910-925]
  • Hosseini-Toudeshky, Hossein A modified model for stability analysis of narrow-width NEMS tweezers: Corrections due to surface layer, scale dependency and force distributions [Volume 24, Issue 2, 2017, Pages 673-683]
  • Hosseinzadeh, L. Enhanced electro-oxidation of urea based on nickel nanoparticle decorated reduced graphene oxide/PEDOT:PSS composite [Volume 24, Issue 3, 2017, Pages 1678-1685]
  • Hosseinzadeh, M. On the oscillatory frequency of the carbon nanotube-based nanothermometers [Volume 24, Issue 3, 2017, Pages 1615-1625]
  • Huang, Z. Assessment of change in acoustic wave velocity of compacted expansive soil through experiments [Volume 24, Issue 1, 2017, Pages 136-142]

I

  • Ilchi Ghazaan, M. A new meta-heuristic algorithm: vibrating particles system [Volume 24, Issue 2, 2017, Pages 551-566]
  • Isa, S. S. P. M. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
  • Islam, Saeed MHD boundary layer flow of an incompressible upper convected Maxwell fluid by Optimal Homotopy Asymptotic Method. [Volume 24, Issue 1, 2017, Pages 202-210]

J

  • Jaberi, A. Experimental Investigation of Shock Waves Formation and Development Process in Transonic Flow [Volume 24, Issue 5, 2017, Pages 2457-2465]
  • Jafari, Hossein Group classification of the time-fractional Kaup-Kupershmidt equation [Volume 24, Issue 1, 2017, Pages 302-307]
  • Jafari, H.R. Sustainable supply chain design with water environmental impacts and justice-oriented employment considerations: A case study in textile industry [Volume 24, Issue 4, 2017, Pages 2119-2137]
  • Jafari, Mojtaba Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
  • Jafari, S. Particle flow simulation in a channel with symmetric protuberances using combination of lattice Boltzmann and smoothed profile methods [Volume 24, Issue 4, 2017, Pages 1940-1949]
  • Jafari Mansoorian, Hossein Phenol Removal from Aqueous Solution by Adsorption Process: Study of The Nanoparticles Performance Prepared from Alo vera and Mesquite (Prosopis) Leaves [Volume 24, Issue 6, 2017, Pages 3041-3052]
  • Jaggi, Chandra K. Two-warehouse inventory model for deteriorating items with imperfect quality under the conditions of permissible delay in payments [Volume 24, Issue 1, 2017, Pages 390-412]
  • Jahanbakhshi, S. Characterization of three-phase flow in porous media using the ensemble Kalman filter [Volume 24, Issue 3, 2017, Pages 1281-1301]
  • Jahangirian, A. An Optimum Neural Network for Evolutionary Aerodynamic Shape Design [Volume 24, Issue 5, 2017, Pages 2490-2500]
  • Jahanshahi Javaran, E. Particle flow simulation in a channel with symmetric protuberances using combination of lattice Boltzmann and smoothed profile methods [Volume 24, Issue 4, 2017, Pages 1940-1949]
  • Jahanshah Rad, Z. S. An Investigation on Effects of Applied Magnetic Field during Zn Vacuum Thermal Evaporation on ZnO Nanostructures [Volume 24, Issue 6, 2017, Pages 3526-3530]
  • Jahromi, M.H.M.A. A new mathematical model for a scheduling problem of dynamic machine-tool selection and operation allocation in a flexible manufacturing system: A modified evolutionary algorithm [Volume 24, Issue 2, 2017, Pages 765-777]
  • Jalali, Mandana Comparison between Periodicity and Randomness from an Effective Refractive Index Point of View; Applicable to thin-film Solar Cells [Volume 24, Issue 6, 2017, Pages 3536-3541]
  • Jalar, A. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
  • JALILI, RASOOL A SEMANTIC ACCESS CONTROL MODEL FOR ONLINE SOCIAL NETWORKS [Volume 24, Issue 6, 2017, Pages 3101-3116]
  • Jamili, A. Simultaneous Train Rescheduling through Cancelling, Delaying and Re-Ordering Policies: Three-Phase Solution Method with Guaranteed Optimality [Volume 24, Issue 1, 2017, Pages 121-135]
  • JAVADI, SEYYED AHMAD A SEMANTIC ACCESS CONTROL MODEL FOR ONLINE SOCIAL NETWORKS [Volume 24, Issue 6, 2017, Pages 3101-3116]
  • Javed, K. Recognizing traffic signs using flexible Discrete Cosine Transform (DCT) grid [Volume 24, Issue 3, 2017, Pages 1384-1394]
  • Jia, Y. A projection-based approach to intuitionistic fuzzy group decision making [Volume 24, Issue 3, 2017, Pages 1505-1518]
  • Jiao, N. Effects of edge rate of the designed line markings on the following time headway [Volume 24, Issue 4, 2017, Pages 1770-1778]
  • Johari, A. Reliability analysis of foundation settlement by stochastic response surface and random finite element method [Volume 24, Issue 6, 2017, Pages 2741-2751]
  • Jolai, F. Model and optimization of the multi-objective single-buyer multi-vendor integrated inventory problem with multiple quantity discounts [Volume 24, Issue 2, 2017, Pages 856-867]
  • Jolai, F. A robust optimization approach for an inventory problem with emergency ordering and product substitution in an uncertain environment: A case study in pharmaceutical industry [Volume 24, Issue 3, 2017, Pages 1533-1546]
  • Jursova, S. Kinetics of reduction and oxidation reactions during pyrometallurgical metal extraction [Volume 24, Issue 4, 2017, Pages 2009-2018]

K

  • Kabir, Mohammad Zaman Effects of shear deformation on Mechanical and thermo-mechanical nonlinear stability of FGM shallow spherical shells subjected to uniform external pressure [Volume 24, Issue 2, 2017, Pages 584-596]
  • Kaczmarek, Kurt A. The Portable Neuromodulation Stimulator (PoNS) for Neurorehabilitation [Volume 24, Issue 6, 2017, Pages 3171-3180]
  • Kadkhoda, N Group classification of the time-fractional Kaup-Kupershmidt equation [Volume 24, Issue 1, 2017, Pages 302-307]
  • Ka fi, M.A. Effect of record scaling on the behavior of reinforced concrete core-wall buildings subjected to near-fault and far-fault earthquakes [Volume 24, Issue 3, 2017, Pages 884-899]
  • Kalyoncuoglu, S. F. Fatigue life prediction of the modified asphalt mixtures with ANFIS modeling [Volume 24, Issue 1, 2017, Pages 72-81]
  • Kamali, Amir Model and optimization of the multi-objective single-buyer multi-vendor integrated inventory problem with multiple quantity discounts [Volume 24, Issue 2, 2017, Pages 856-867]
  • Kanani, A. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
  • Kang, C.W. Human errors incorporation in work-in-process group manufacturing system [Volume 24, Issue 4, 2017, Pages 2050-2061]
  • KAPLAN, Yusuf Alper Determination of Weibull Parameters by Different Numerical Methods and Analysis of Wind Power Density in Osmaniye, Turkey [Volume 24, Issue 6, 2017, Pages 3204-3212]
  • Karakoc, S.B.G. Application of Petrov-Galerkin finite element method to shallow water waves model: Modified Korteweg-de Vries equation [Volume 24, Issue 3, 2017, Pages 1148-1159]
  • Karami, S. Selection and scaling of spectrum-compatible ground motion records using hybrid coded genetic algorithms [Volume 24, Issue 3, 2017, Pages 910-925]
  • Karbasi, S. Evaluation of physical and mechanical properties of B-tri-calcium phosphate/poly-3-hydroxybutyrate nanocomposite scaffold for bone tissue engineering application [Volume 24, Issue 3, 2017, Pages 1654-1668]
  • Karbati Asl, A. Effects of petrochemical wastes incinerator ash powder instead of Portland cement on the properties of concrete [Volume 24, Issue 3, 2017, Pages 1017-1026]
  • Karbati Asl, R. Effects of petrochemical wastes incinerator ash powder instead of Portland cement on the properties of concrete [Volume 24, Issue 3, 2017, Pages 1017-1026]
  • Kargar, M. Effect of reinforcement geometry on the performance of a reduced-scale strip footing model supported on geocell-reinforced sand [Volume 24, Issue 1, 2017, Pages 96-109]
  • Karimi, A.H. Study of pile behavior by improvement of confining soils using frustum confining vessel [Volume 24, Issue 4, 2017, Pages 1874-1882]
  • Karimi, Behrooz A new model to optimize the knowledge exchange in industrial cluster: A case study of Semnan plaster production industrial cluster [Volume 24, Issue 2, 2017, Pages 834-846]
  • Karimi, N. A Benders decomposition algorithm for multi-factory scheduling problem with batch delivery [Volume 24, Issue 2, 2017, Pages 823-833]
  • Karimi-Sabet, Javad The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
  • Karimzadeh, A. Effect of size dependency on in-plane vibration of circular micro-rings [Volume 24, Issue 4, 2017, Pages 1996-2008]
  • Karthikeyan, B. Effect of Ultra-Fine SiO2 and Metakaolin on High Strength Concrete in Aggressive Environment [Volume 24, Issue 1, 2017, Pages 1-10]
  • Kaveh, A. Optimum two-dimensional crack modeling in discrete least-squares meshless method by charged system search algorithm [Volume 24, Issue 1, 2017, Pages 143-152]
  • Kaveh, A. A new meta-heuristic algorithm: vibrating particles system [Volume 24, Issue 2, 2017, Pages 551-566]
  • Kaveh, A. A new meta-heuristic algorithm: vibrating particles system [Volume 24, Issue 2, 2017, Pages 551-566]
  • Kaveh, A. Assessment of labor productivity in construction projects using system dynamic approach [Volume 24, Issue 6, 2017, Pages 2684-2695]
  • Kazemi, M.R. Effiiently computing the smallest axis-parallel squares spanning all colors [Volume 24, Issue 3, 2017, Pages 1325-1334]
  • Kazemi, Seyed Mohamad Mehdi An Integrated Pricing and Inventory Model for Deteriorating Products in a two stage supply chain under Replacement and Shortage [Volume 24, Issue 1, 2017, Pages 342-354]
  • Keikha, H. On the assessment of a new steel bolted flush end-plate beam splice connection [Volume 24, Issue 4, 2017, Pages 1735-1750]
  • Keivani, M. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
  • Kermani, Mohammad Jafar Effects of non-equilibrium condensation on aerodynamics of the flow field in a steam turbine cascade [Volume 24, Issue 2, 2017, Pages 624-634]
  • Keshavarz, Amin Axisymmetric active lateral earth pressure for c-Φ soils using the stress characteristics method [Volume 24, Issue 5, 2017, Pages 2332-2345]
  • Ketabchi, Mostafa Fatigue behavior of nano-grained pure copper processed by equal channel angular rolling [Volume 24, Issue 2, 2017, Pages 656-661]
  • Keyhanian, Sina Integrated Dynamic Cell Formation-Production Planning: A New Mathematical Model [Volume 24, Issue 5, 2017, Pages 2550-2566]
  • Khademi, M.H. Optimization of ethylene oxychlorination fluidized-bed reactor using Differential Evolution (DE) method [Volume 24, Issue 3, 2017, Pages 1253-1263]
  • Khader, Mohamed Meabed Application of Homotopy Perturbation Sumudu Transform  Method for  Solving Nonlinear Fractional Heat-like Equations [Volume 24, Issue 2, 2017, Pages 648-655]
  • Khakzad, M. The Effect of Outer Diameter of Multi-Walled Carbon Nanotubes on Fracture Behavior of Epoxy Adhesives [Volume 24, Issue 6, 2017, Pages 2952-2962]
  • Khaleghpanah, Shila The effect of current density on microstructural homogeneity, hardness, fracture toughness and electrochemical behavior of electrodeposited Cu-0.5Co/WC nano-composite coating [Volume 24, Issue 6, 2017, Pages 3505-3511]
  • Khan, Ilyas MHD boundary layer flow of an incompressible upper convected Maxwell fluid by Optimal Homotopy Asymptotic Method. [Volume 24, Issue 1, 2017, Pages 202-210]
  • Khan, Yasir Magnetohydrodynamic flow of linear visco-elastic fluid model above a shrinking/stretching sheet: A series solution [Volume 24, Issue 5, 2017, Pages 2466-2472]
  • Khanlo, H.M. Chaotic behaviors of a ground vehicle oscillating system with passengers [Volume 24, Issue 3, 2017, Pages 1051-1068]
  • Khanmohammadi, Reza Assessment of labor productivity in construction projects using system dynamic approach [Volume 24, Issue 6, 2017, Pages 2684-2695]
  • Khanteimouri, P. Effiiently computing the smallest axis-parallel squares spanning all colors [Volume 24, Issue 3, 2017, Pages 1325-1334]
  • Khanzadi, M. Assessment of labor productivity in construction projects using system dynamic approach [Volume 24, Issue 6, 2017, Pages 2684-2695]
  • Khazaei, J. Study of pile behavior by improvement of confining soils using frustum confining vessel [Volume 24, Issue 4, 2017, Pages 1874-1882]
  • Kheyroddin, A. Effect of record scaling on the behavior of reinforced concrete core-wall buildings subjected to near-fault and far-fault earthquakes [Volume 24, Issue 3, 2017, Pages 884-899]
  • Khodadadi, Abbas Ali Graphene oxide/SnO2 Nanocomposite as Sensing Material for Breathalyzers: Selective Detection of Ethanol in the presence of Automotive CO and Hydrocarbons Emissions [Volume 24, Issue 6, 2017, Pages 3033-3040]
  • Khojasteh, A. Three-dimensional axisymmetric responses of exponentially graded transversely isotropic tri-materials under interfacial loading [Volume 24, Issue 3, 2017, Pages 966-978]
  • Khor, C.Y. Influence of printed circuit board thickness in wave soldering [Volume 24, Issue 6, 2017, Pages 2963-2976]
  • Khoramishad, H. The Effect of Outer Diameter of Multi-Walled Carbon Nanotubes on Fracture Behavior of Epoxy Adhesives [Volume 24, Issue 6, 2017, Pages 2952-2962]
  • Khorram, E. Fuzzy multi-objective optimization of linear functions subject to max-arithmetic mean relational inequality constraints [Volume 24, Issue 3, 2017, Pages 1561-1570]
  • Khoshbin, F. Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel [Volume 24, Issue 3, 2017, Pages 1000-1009]
  • Kia, M. Probabilistic seismic hazard analysis using reliability methods [Volume 24, Issue 3, 2017, Pages 933-941]
  • Knutsson, Sven Comparison of three dimensional and two dimensional axisymmetric finite element analyses of a corner section of a tailings dam [Volume 24, Issue 5, 2017, Pages 2320-2331]
  • Kocamaz, U.E. Application of trend analysis and artificial neural networks methods: The case of Sakarya River [Volume 24, Issue 3, 2017, Pages 993-999]
  • Kohan, S . Investigating the experimental behavior of the reinforcements effect on the railway traverse under the dynamic load [Volume 24, Issue 5, 2017, Pages 2253-2261]
  • Kokabi, Reza Credibility-Based Fuzzy Mathematical Programming for Bi-Objective Capacitated Partial Facility Interdiction with Fortification and Demand Outsourcing Model [Volume 24, Issue 2, 2017, Pages 778-793]
  • Kolahan, F. Simultaneous Optimization of Joint Edge Geometry and Process Parameters in Gas Metal Arc Welding Using Integrated ANN - PSO Approach [Volume 24, Issue 1, 2017, Pages 260-273]
  • Koochi, Ali A modified model for stability analysis of narrow-width NEMS tweezers: Corrections due to surface layer, scale dependency and force distributions [Volume 24, Issue 2, 2017, Pages 673-683]
  • Kouchakinejad, F. Fuzzy multi-objective optimization of linear functions subject to max-arithmetic mean relational inequality constraints [Volume 24, Issue 3, 2017, Pages 1561-1570]
  • Kouchak Yazdi, Z. Comparison and optimization of conjugated linoleic acid production by Lactobacillus plantarum and Lactobacillus plantarum subsp. plantarum [Volume 24, Issue 3, 2017, Pages 1272-1280]
  • Kouhestani, A. Particle flow simulation in a channel with symmetric protuberances using combination of lattice Boltzmann and smoothed profile methods [Volume 24, Issue 4, 2017, Pages 1940-1949]
  • Kumar, D. A new algorithm for the computation of the decimals of the inverse [Volume 24, Issue 3, 2017, Pages 1363-1372]
  • Kumar, Hitender Topological and non-topological soliton solution of the 1 + 3 dimensional Gross-Pitaevskii equation with quadratic potential term [Volume 24, Issue 5, 2017, Pages 2429-2435]
  • Kunelbayev, Murat Integrated system for the use of solar energy in the animal farm [Volume 24, Issue 6, 2017, Pages 3213-3222]

L

  • Lakho, N.A. Long-term flexural behavior of reinforced baked clay beams [Volume 24, Issue 3, 2017, Pages 877-883]
  • Lalithamba, Haraluru Shankaraiah Synthesis of Nα-protected formamides from amino acids using MgO nano catalyst: Study of molecular docking and antibacterial activity [Volume 24, Issue 6, 2017, Pages 3002-3013]
  • Lashkar Ara, A. Enhancing power system transient stability using optimal unified power flow controller based on Lyapunov control strategy [Volume 24, Issue 3, 2017, Pages 1458-1466]
  • Lee, Muhammad Hisyam New EWMA S2 Control Charts for Monitoring Process Dispersion [Volume 24, Issue 1, 2017, Pages 378-389]
  • Liu, P.D. Induced generalized interval neutrosophic Shapley hybrid operators and their application in multi-attribute decision making [Volume 24, Issue 4, 2017, Pages 2164-2181]
  • Liu, W.L. Induced generalized interval neutrosophic Shapley hybrid operators and their application in multi-attribute decision making [Volume 24, Issue 4, 2017, Pages 2164-2181]
  • Lu, Tzu-Yang Multi-Objective Optimization of Green Supply Chain Network Designs for Transportation Mode Selection [Volume 24, Issue 6, 2017, Pages 3355-3370]

M

  • Madaah Hosseini, Hamid Reza Ultraviolet and Visible Upconversion Emissions in Er3+-Yb3+ Doped Titanium Dioxide Nanopowder under the 980 nm Laser Diode Excitation [Volume 24, Issue 6, 2017, Pages 3500-3504]
  • Madaah Hosseini, Hamid Reza The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
  • Mahadevaiah, Raghavendra Synthesis of Nα-protected formamides from amino acids using MgO nano catalyst: Study of molecular docking and antibacterial activity [Volume 24, Issue 6, 2017, Pages 3002-3013]
  • Mahmood, T. Performance evaluation of joint monitoring control charts [Volume 24, Issue 4, 2017, Pages 2152-2163]
  • Mahmoodian, Vahid A new mathematical model for integrated production planning and scheduling problem in capacitated flexible flow shop with sequence-dependent setups [Volume 24, Issue 5, 2017, Pages 2501-2514]
  • Majdi, M. Graphene Based Nano Bio-sensor: Sensitivity Improvement [Volume 24, Issue 6, 2017, Pages 3531-3535]
  • Makui, Ahmad A new mathematical model for a scheduling problem of dynamic machine-tool selection and operation allocation in a flexible manufacturing system: A modified evolutionary algorithm [Volume 24, Issue 2, 2017, Pages 765-777]
  • Malakootian, Mohammad Phenol Removal from Aqueous Solution by Adsorption Process: Study of The Nanoparticles Performance Prepared from Alo vera and Mesquite (Prosopis) Leaves [Volume 24, Issue 6, 2017, Pages 3041-3052]
  • Maleki-Amin, M.J. Application of damage spectra as seismic intensity measures in endurance time method for steel moment-resisting frames [Volume 24, Issue 1, 2017, Pages 53-64]
  • Malleswaran, A. Hydro-magnetic mixed convection in a lid-driven cavity with partially thermally active walls [Volume 24, Issue 1, 2017, Pages 153-163]
  • Manavizadeh, N. Sequencing of mixed models on U-shaped assembly lines by considering effective help policies in make-to-order environment [Volume 24, Issue 3, 2017, Pages 1493-1504]
  • Manavizadeh, Neda Integrated Dynamic Cell Formation-Production Planning: A New Mathematical Model [Volume 24, Issue 5, 2017, Pages 2550-2566]
  • Mannan, A. Recognizing traffic signs using flexible Discrete Cosine Transform (DCT) grid [Volume 24, Issue 3, 2017, Pages 1384-1394]
  • Marandi, F. Integrated production and distribution scheduling for perishable products [Volume 24, Issue 4, 2017, Pages 2105-2118]
  • Mardan, E. A robust optimization approach for an inventory problem with emergency ordering and product substitution in an uncertain environment: A case study in pharmaceutical industry [Volume 24, Issue 3, 2017, Pages 1533-1546]
  • Martemianov, S. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]
  • Marzouk, H. Strength and elastic moduli of a concrete bridge using advanced nondestructive techniques [Volume 24, Issue 3, 2017, Pages 942-952]
  • Masdari, M. Effect of wind tunnel wall porosity on the flow around an oscillating airfoil at transonic speeds [Volume 24, Issue 3, 2017, Pages 1069-1076]
  • Mashinchi, M. Fuzzy multi-objective optimization of linear functions subject to max-arithmetic mean relational inequality constraints [Volume 24, Issue 3, 2017, Pages 1561-1570]
  • Massumi, A. Fundamental period of vibration for seismic design of concrete shear wall buildings [Volume 24, Issue 3, 2017, Pages 1010-1016]
  • Mastali, M. Increasing the flexural capacity of geopolymer concrete beams using partially deflection hardening cement-based layers: Numerical study [Volume 24, Issue 6, 2017, Pages 2832-2844]
  • Mastali, M.. Increasing the flexural capacity of geopolymer concrete beams using partially deflection hardening cement-based layers: Numerical study [Volume 24, Issue 6, 2017, Pages 2832-2844]
  • Masteri-Farahani, M. Preparation of MoO3/CuMoO4 nanoparticles as selective catalyst for olefin epoxidation [Volume 24, Issue 3, 2017, Pages 1203-1208]
  • Masteri-Farahani, M. Encapsulation of Keggin-type phosphotungstic acid into the mesopores of SBA-16 as a reusable heterogeneous catalyst for the epoxidation of olefins [Volume 24, Issue 6, 2017, Pages 2993-3001]
  • Mattsson, Hans Comparison of three dimensional and two dimensional axisymmetric finite element analyses of a corner section of a tailings dam [Volume 24, Issue 5, 2017, Pages 2320-2331]
  • Mazaheri, H. Experimental and numerical study on the effect of aluminum foil wrapping on penetration resistance of ceramic tiles [Volume 24, Issue 3, 2017, Pages 1126-1135]
  • Mazaheri, Karim The Application of Suction and Blowing in Performance Improvement of Transonic Airfoils with Shock Control Bump [Volume 24, Issue 1, 2017, Pages 274-292]
  • Mazloum-Ardakani, M. Enhanced electro-oxidation of urea based on nickel nanoparticle decorated reduced graphene oxide/PEDOT:PSS composite [Volume 24, Issue 3, 2017, Pages 1678-1685]
  • Mehdigholi, Hamid Evaluation of planing craft maneuverability using mathematical modeling under the action of the rudder [Volume 24, Issue 1, 2017, Pages 293-301]
  • Mehdikhani-Nahrkhalaji, M. Copper-doped and copper-free bioactive glass nanopowders cytotoxicity and antibacterial activity assessment [Volume 24, Issue 3, 2017, Pages 1706-1716]
  • Mehdizadeh, Esmaeil Optimizing Reliability and Cost of system for Aggregate Production Planning in Supply Chain [Volume 24, Issue 6, 2017, Pages 3394-3408]
  • Mehraein, Mojtaba Experimental study on relation between scour and complex 3D flow field [Volume 24, Issue 6, 2017, Pages 2696-2711]
  • Mehrpay, Saeid Strain Rate Effect in the Mesoscopic Modeling of High-Strength Steel Fiber-Reinforced Concrete [Volume 24, Issue 2, 2017, Pages 512-525]
  • MINAEI, Shahram A High Performance Full-Wave Rectifier Using a Single CCII-, Two Diodes and Two Resistor [Volume 24, Issue 6, 2017, Pages 3280-3286]
  • Mirghader, Seyed Rasoul Tubular Web RBS Connection to Improve Seismic Behavior of Moment Resisting Steel Frames [Volume 24, Issue 6, 2017, Pages 2726-2740]
  • Mirhosseini, S. M. Experimental study on behavior of soil-waste tire mixtures [Volume 24, Issue 1, 2017, Pages 65-71]
  • Miri, A. Dynamic load testing of a railway masonry arch bridge: A case study of Babak Bridge [Volume 24, Issue 4, 2017, Pages 1834-1842]
  • Mirjalili, Bi Bi Fatemeh Synthesis of quinoxalines promoted by eco-friendly nano-kaoline/BF3/Fe3O4 nano-catalyst under grinding condition [Volume 24, Issue 6, 2017, Pages 3014-3021]
  • Mir Mohammad Hosseini, S.M. Effect of reinforcement geometry on the performance of a reduced-scale strip footing model supported on geocell-reinforced sand [Volume 24, Issue 1, 2017, Pages 96-109]
  • Mirzahossein, Hamid An integrated train scheduling and infrastructure development model in railway networks [Volume 24, Issue 6, 2017, Pages 3409-3422]
  • Mirzazadeh, Abolfazl A queuing location–allocation model for a capacitated health care system [Volume 24, Issue 2, 2017, Pages 751-764]
  • Mobayen, S. Nonsingular fast terminal sliding-mode stabilizer for a class of uncertain nonlinear systems based on disturbance observer [Volume 24, Issue 3, 2017, Pages 1410-1418]
  • Mobini, A. Hand acceleration measurement by Kinect for rehabilitation applications [Volume 24, Issue 1, 2017, Pages 191-201]
  • Modarres, M. Encapsulation of Keggin-type phosphotungstic acid into the mesopores of SBA-16 as a reusable heterogeneous catalyst for the epoxidation of olefins [Volume 24, Issue 6, 2017, Pages 2993-3001]
  • Moeini, R. Arc based ant colony optimization algorithm for solving sewer network design optimization problem [Volume 24, Issue 3, 2017, Pages 953-965]
  • Mofid, M. On the improvement of steel plate shear wall behavior, using energy absorbent element [Volume 24, Issue 1, 2017, Pages 11-18]
  • Mofid, M. On the assessment of a new steel bolted flush end-plate beam splice connection [Volume 24, Issue 4, 2017, Pages 1735-1750]
  • Mofid, Massood The effect of gusset plate in moment-rotation behavior of double-web angle connection, in braced frames [Volume 24, Issue 6, 2017, Pages 2712-2725]
  • Moghimi Zand, Mahdi Transient behavior of electrostatically-actuated micro systems considering squeeze film damping and mechanical shock [Volume 24, Issue 6, 2017, Pages 2887-2894]
  • Mohades, A. Effiiently computing the smallest axis-parallel squares spanning all colors [Volume 24, Issue 3, 2017, Pages 1325-1334]
  • Mohammad Aliha, Hamide Graphene oxide/SnO2 Nanocomposite as Sensing Material for Breathalyzers: Selective Detection of Ethanol in the presence of Automotive CO and Hydrocarbons Emissions [Volume 24, Issue 6, 2017, Pages 3033-3040]
  • Mohammadalipour A ski, Roja Effect of Steel and Concrete Coupling Beam on Seismic Behavior of RC Frame Accompanied with Coupled Shear Walls [Volume 24, Issue 5, 2017, Pages 2227-2241]
  • Mohammad-Beigi, Hossein Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
  • Mohammadi, M. State of the art on the maximum strength of masonry infilled frames [Volume 24, Issue 3, 2017, Pages 900-909]
  • Mohammadi, M. Enhancement of hydrogen storage on multi-walled carbon nanotube through KOH activation and nickel nanoparticle deposition [Volume 24, Issue 3, 2017, Pages 1230-1240]
  • Mohammadi, Mohammad A queuing location–allocation model for a capacitated health care system [Volume 24, Issue 2, 2017, Pages 751-764]
  • Mohammadi, Mohammad Mostafa High frequency vibrations of quartz crystals subject to initial thermo-mechanical bias [Volume 24, Issue 2, 2017, Pages 684-697]
  • Mohammadi, Z. Parameter identification of a parametrically excited rate micro-gyroscope using recursive least squares method [Volume 24, Issue 4, 2017, Pages 1889-2019]
  • Mohammadi, Z. Induced generalized interval neutrosophic Shapley hybrid operators and their application in multi-attribute decision making [Volume 24, Issue 4, 2017, Pages 2164-2181]
  • Mohammadi Alasti, B. Various types of ceramics used in radome: A review [Volume 24, Issue 3, 2017, Pages 1136-1147]
  • Mohammadi Vojdan, B. Investigating the seismic behavior of RC shear walls with openings strengthened with FRP sheets using different schemes [Volume 24, Issue 4, 2017, Pages 1855-1865]
  • Mojarad, Roghayeh Comparison and Analysis of Three Anomaly Correction Methods in Embedded Systems [Volume 24, Issue 6, 2017, Pages 3087-3100]
  • Mojarrad, M. Detecting shoreline changes in Chabahar Bay by processing satellite images [Volume 24, Issue 4, 2017, Pages 1802-1809]
  • Mokhtari, H. A computational approach to economic production quantity model for perishable products with backordering shortage and stock-dependent demand [Volume 24, Issue 4, 2017, Pages 2138-2151]
  • Mokhtari, Hadi A Multi-Objective Multi-State Degraded System to Optimize Maintenance/Repair Costs and System Availability [Volume 24, Issue 1, 2017, Pages 355-363]
  • Mokhtari, J. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
  • Mol, J.M.C. pH-Responsive Nanostructured Polyaniline Capsules for Self-Healing Corrosion Protection: The Influence of Capsule Concentration [Volume 24, Issue 6, 2017, Pages 3512-3520]
  • MolaAbasi, Hossein Polynomial Models Controlling Strength of Zeolite-Cement-Sand Mixtures [Volume 24, Issue 2, 2017, Pages 526-536]
  • Monjezi, M. Submicron particle deposition in pulmonary alveoli during cyclic breathing [Volume 24, Issue 4, 2017, Pages 1975-1984]
  • Moosaie, A. On the orientation dynamics and viscoelasticity of Brownian rigid disklike particles suspended in a shear flow [Volume 24, Issue 3, 2017, Pages 1027-1171]
  • Moradi, Saeed Modeling Labor Productivity in Construction Projects using Hybrid SD-DES Approach [Volume 24, Issue 6, 2017, Pages 2752-2761]
  • Moratal, David A generalized entropy-based two-phase threshold algorithm for noisy medical image edge detection [Volume 24, Issue 6, 2017, Pages 3247-3256]
  • Morshedi, Dina Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
  • Mortazavi, Yadollah Graphene oxide/SnO2 Nanocomposite as Sensing Material for Breathalyzers: Selective Detection of Ethanol in the presence of Automotive CO and Hydrocarbons Emissions [Volume 24, Issue 6, 2017, Pages 3033-3040]
  • Moslehi, Gh. Minimizing maximum earliness in single-machine scheduling with flexible maintenance time [Volume 24, Issue 4, 2017, Pages 2082-2094]
  • Mostafaei, Hasan Stability analysis of arch dam abutments due to seismic loading [Volume 24, Issue 2, 2017, Pages 467-475]
  • Mostofinejad, Davood Simulating FRP Debonding From Concrete Surface in FRP Strengthened RC Beams: A Case Study [Volume 24, Issue 2, 2017, Pages 452-466]
  • Mosto nejad, D. Effects of petrochemical wastes incinerator ash powder instead of Portland cement on the properties of concrete [Volume 24, Issue 3, 2017, Pages 1017-1026]
  • Motiee, F. Preference of Nano porous graphene to Single-Walled Carbon Nanotube (SWCNT) for preparing Silica Nano hybrid Pickering Emulsion for potential Chemical Enhanced Oil Recovery (C-EOR) [Volume 24, Issue 6, 2017, Pages 3491-3499]
  • Mousavi, S. Abbas The effect of pH on lateral size and surface chemistry of graphene oxide [Volume 24, Issue 6, 2017, Pages 3554-3559]
  • Moussavi Torshizi, S.Abolfazl Multilevel optimization of profile of splitter blades in the impeller of a centrifugal compressor [Volume 24, Issue 2, 2017, Pages 707-714]
  • Mozaffari, Ali Asghar Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
  • Muhamad Ali, M.Z. Muhamad Ali Selection of variogram model for spatial rainfall mapping using Analytical Hierarchy Procedure (AHP) [Volume 24, Issue 1, 2017, Pages 28-39]
  • Muhammad, Riaz Dynamic Behaviour of β-Ti-15333 in Ultrasonically Assisted Turning: Experimental and Numerical Analysis [Volume 24, Issue 6, 2017, Pages 2904-2914]

N

  • Nabavi Niaki, S.A. Enhancing power system transient stability using optimal unified power flow controller based on Lyapunov control strategy [Volume 24, Issue 3, 2017, Pages 1458-1466]
  • Nabizadeh, H. Effects of moisture on warm mix asphalt containing Sasobit [Volume 24, Issue 4, 2017, Pages 1866-1873]
  • Naderi, B. Effects of moisture on warm mix asphalt containing Sasobit [Volume 24, Issue 4, 2017, Pages 1866-1873]
  • Nadgaran, Hamid Comparison between Periodicity and Randomness from an Effective Refractive Index Point of View; Applicable to thin-film Solar Cells [Volume 24, Issue 6, 2017, Pages 3536-3541]
  • Naghdabadi, R. Experimental and numerical study on the effect of aluminum foil wrapping on penetration resistance of ceramic tiles [Volume 24, Issue 3, 2017, Pages 1126-1135]
  • Naik, T.R. Effect Of Curing Conditions On Strength And Durability Of High-Performance Concrete [Volume 24, Issue 2, 2017, Pages 576-583]
  • Naimi-Sadigh, A. A computational approach to economic production quantity model for perishable products with backordering shortage and stock-dependent demand [Volume 24, Issue 4, 2017, Pages 2138-2151]
  • Najafi, Esmail A multi-objective multi-echelon green supply chain network design problem with risk-averse retailers in an uncertain environment [Volume 24, Issue 1, 2017, Pages 413-423]
  • Najafi-Jilani, A. Application of Neural Network Models to Improve Prediction Accuracy of Wave Run-up on Antifer Covered Breakwater [Volume 24, Issue 2, 2017, Pages 567-575]
  • Najafi-Jilani, A. Application of Neural Network Models to Improve Prediction Accuracy of Wave Run-up on Antifer Covered Breakwater [Volume 24, Issue 2, 2017, Pages 567-575]
  • Naja i, M. Preparation of MoO3/CuMoO4 nanoparticles as selective catalyst for olefin epoxidation [Volume 24, Issue 3, 2017, Pages 1203-1208]
  • Naji, Mohammad Mechanical reinforcement of urinary bladder matrix by electrospun polycaprolactone nanofibers [Volume 24, Issue 6, 2017, Pages 3476-3480]
  • Nasirzadeh, Farnad Modeling Labor Productivity in Construction Projects using Hybrid SD-DES Approach [Volume 24, Issue 6, 2017, Pages 2752-2761]
  • Nassoti, Mahour Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
  • Nazar, R. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
  • Nazari, Y. Light Oil – Gas Two-Phase Flow Pattern Identification in Different Pipe Orientations: An Experimental Approach [Volume 24, Issue 5, 2017, Pages 2445-2456]
  • Nazir, H.Z. Performance evaluation of joint monitoring control charts [Volume 24, Issue 4, 2017, Pages 2152-2163]
  • Neelakantan, T.R. Optimization of Hedging Rules for Hydropower Reservoir Operation [Volume 24, Issue 5, 2017, Pages 2242-2252]
  • Neirameh, Ahmad An analytical method for finding exact solitary wave solutions ofthe coupled (2 1)-dimensional Painlevé Burgers equation [Volume 24, Issue 2, 2017, Pages 715-726]
  • Nejati, Ashkan The Application of Suction and Blowing in Performance Improvement of Transonic Airfoils with Shock Control Bump [Volume 24, Issue 1, 2017, Pages 274-292]
  • Nemati Keshteli, Ramazan A fuzzy dynamic multi-objective, multi-item model by considering customer satisfaction in supply chain [Volume 24, Issue 5, 2017, Pages 2623-2639]
  • Nigmatullin, R.R. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]
  • Nikonam M., Raheleh Effect of Cu2+ ion on Biological Performance of Nanostructured Fluorapatite Doped with Copper [Volume 24, Issue 6, 2017, Pages 2845-2855]
  • Niranjan, H. Chemical reaction, soret and dufour effects on MHD mixed convection stagnation point flow with radiation and slip condition [Volume 24, Issue 2, 2017, Pages 698-706]
  • Nobahari, Hadi Integrated Optimization of Guidance and Control Parameters in a Dual Spin Flying Vehicle [Volume 24, Issue 5, 2017, Pages 2473-2489]
  • Noon, S.K. Recognizing traffic signs using flexible Discrete Cosine Transform (DCT) grid [Volume 24, Issue 3, 2017, Pages 1384-1394]
  • Noor, N. F. M. Zero and nonzero normal fluxes of thermal radiative boundary layer flow of nanofluid over a radially stretched surface [Volume 24, Issue 6, 2017, Pages 2895-2903]
  • Noorpour, M. Effects of petrochemical wastes incinerator ash powder instead of Portland cement on the properties of concrete [Volume 24, Issue 3, 2017, Pages 1017-1026]
  • Noorpour, S. Effects of petrochemical wastes incinerator ash powder instead of Portland cement on the properties of concrete [Volume 24, Issue 3, 2017, Pages 1017-1026]
  • Nourmohammadi, Amir Decreasing the Crane Working Time in Retrieving the Containers from a Bay [Volume 24, Issue 1, 2017, Pages 309-318]
  • Nuraliza, N. Surface modification of biomaterial embedded with pits using die sinker machine [Volume 24, Issue 4, 2017, Pages 1901-1911]

O

  • Odishelidze, Nana On the solution of a contact problem for a rhombus weakened with a full-strength hole [Volume 24, Issue 1, 2017, Pages 183-190]
  • Olawale Ajadi, Jimoh NEW MEMORY-TYPE CONTROL CHARTS FOR MONITORING PROCESS MEAN AND DISPERSION [Volume 24, Issue 6, 2017, Pages 3423-3438]
  • Oliaei, M. Dynamic behavior of large-diameter piles with considering liquefaction under clay layer [Volume 24, Issue 6, 2017, Pages 2665-2683]
  • Omidvari, M. Sustainable supply chain design with water environmental impacts and justice-oriented employment considerations: A case study in textile industry [Volume 24, Issue 4, 2017, Pages 2119-2137]
  • Ordoubadi, M. Surface tension simulation of free surface flows using smoothed particle hydrodynamics [Volume 24, Issue 4, 2017, Pages 2019-2033]
  • Ormann, Linda Comparison of three dimensional and two dimensional axisymmetric finite element analyses of a corner section of a tailings dam [Volume 24, Issue 5, 2017, Pages 2320-2331]
  • Oroojlooy Jadid, Afshin Train Timetabling on double track and multiple station capacity railway with useful upper and lower bounds [Volume 24, Issue 6, 2017, Pages 3324-3344]
  • Orosa, J.A. Wind turbines design corrections for next Galicia climatic conditions [Volume 24, Issue 3, 2017, Pages 926-932]
  • Osei-Aning, R. Monitoring of serially correlated processes using residual control charts [Volume 24, Issue 3, 2017, Pages 1603-1614]
  • Oshagh, Gh. Numerical modelling of the mechanical behaviour of steel brace modified by CFRP sheet [Volume 24, Issue 4, 2017, Pages 1883-1888]
  • Othman, F. Selection of variogram model for spatial rainfall mapping using Analytical Hierarchy Procedure (AHP) [Volume 24, Issue 1, 2017, Pages 28-39]
  • Ozcinar, Cagri A Robust Proportion-Preserving Composite Objective Function for Scale-Invariant Multi-Objective Optimization [Volume 24, Issue 6, 2017, Pages 2977-2991]

P

  • Panahi, Abbas On a Conceptual Method for the Extraction of Wind Energy Using Airfoil and Linear Generator [Volume 24, Issue 2, 2017, Pages 597-609]
  • Pilaram, H. A lattice-based changeable threshold multi-secret sharing scheme and its application to threshold cryptography [Volume 24, Issue 3, 2017, Pages 1448-1457]
  • Pirhady Tavandashti, N. pH-Responsive Nanostructured Polyaniline Capsules for Self-Healing Corrosion Protection: The Influence of Capsule Concentration [Volume 24, Issue 6, 2017, Pages 3512-3520]
  • Pirzadeh, K. Enhancement of hydrogen storage on multi-walled carbon nanotube through KOH activation and nickel nanoparticle deposition [Volume 24, Issue 3, 2017, Pages 1230-1240]
  • Pishvaie, M.R. Characterization of three-phase flow in porous media using the ensemble Kalman filter [Volume 24, Issue 3, 2017, Pages 1281-1301]
  • POLAT, GUL Data Envelopment Analysis (DEA) Approach for Making the Bid/No Bid Decision: A Case Study in a Turkish Construction Contracting Company [Volume 24, Issue 2, 2017, Pages 497-511]
  • Pop, I. MHD mixed convection boundary layer flow of a Casson fluid bounded by permeable shrinking sheet with exponential variation [Volume 24, Issue 2, 2017, Pages 637-647]
  • Pouraliakbari, Mahsa A queuing location–allocation model for a capacitated health care system [Volume 24, Issue 2, 2017, Pages 751-764]
  • Pouraminian, M. Multi-criteria optimization of concrete arch dams [Volume 24, Issue 4, 2017, Pages 1810-1820]
  • Pourkarim Guilani, Pa. A bi-objective model to optimize reliability and cost of k-out-of-n series-parallel systems with tri-state components [Volume 24, Issue 3, 2017, Pages 1585-1602]
  • Pourkarim Guilani, Pe. A bi-objective model to optimize reliability and cost of k-out-of-n series-parallel systems with tri-state components [Volume 24, Issue 3, 2017, Pages 1585-1602]
  • Pourzeynali, Saeid Vertical vibration control of suspension bridges subjected to earthquake by Semi-active MR dampers [Volume 24, Issue 2, 2017, Pages 439-451]
  • Pourzeynali, Saeid Assessment of Collapse Modes in Reinforced Concrete Frames Considering Record-to-Record and Modeling Uncertainties [Volume 24, Issue 5, 2017, Pages 2213-2226]
  • Pourzeynali, Solmaz Vertical vibration control of suspension bridges subjected to earthquake by Semi-active MR dampers [Volume 24, Issue 2, 2017, Pages 439-451]
  • P. Prabhakaran, Molamma Impact of electrospun Tecophilic/gelatin scaffold biofunctionalization on proliferation of vascular smooth muscle cells [Volume 24, Issue 6, 2017, Pages 3458-3465]
  • Pustejovska, P. Kinetics of reduction and oxidation reactions during pyrometallurgical metal extraction [Volume 24, Issue 4, 2017, Pages 2009-2018]

Q

  • Qandalee, Mohammad H2S Removal Using ZnO/SBA-3: New Synthesis Route and Optimization of Process Parameters [Volume 24, Issue 6, 2017, Pages 3064-3073]

R

  • Rabbani, M. Sequencing of mixed models on U-shaped assembly lines by considering effective help policies in make-to-order environment [Volume 24, Issue 3, 2017, Pages 1493-1504]
  • Rabbani, M. A robust optimization approach for an inventory problem with emergency ordering and product substitution in an uncertain environment: A case study in pharmaceutical industry [Volume 24, Issue 3, 2017, Pages 1533-1546]
  • Rabbani, Masoud Integrated Dynamic Cell Formation-Production Planning: A New Mathematical Model [Volume 24, Issue 5, 2017, Pages 2550-2566]
  • Rabiee, M. Influence of foundation flexibility on the seismic response of low-to-mid-rise moment-resisting frame buildings [Volume 24, Issue 3, 2017, Pages 979-992]
  • Rabiei, A. Application of Neural Network Models to Improve Prediction Accuracy of Wave Run-up on Antifer Covered Breakwater [Volume 24, Issue 2, 2017, Pages 567-575]
  • Rach, R. The size-dependent electromechanical instability of double-sided and paddle-type actuators in centrifugal and Casimir force fields [Volume 24, Issue 3, 2017, Pages 1077-1090]
  • Rafienia, M. Copper-doped and copper-free bioactive glass nanopowders cytotoxicity and antibacterial activity assessment [Volume 24, Issue 3, 2017, Pages 1706-1716]
  • Rafighi, Mohammad Applying a multi sensor system to predict and simulate the tool wear using of artificial neural networks [Volume 24, Issue 6, 2017, Pages 2864-2874]
  • Rahaeifard, M. Effect of size dependency on in-plane vibration of circular micro-rings [Volume 24, Issue 4, 2017, Pages 1996-2008]
  • Rahimi, Y. Design of an innovative construction model for supply chain management by measuring agility and cost of quality: An empirical study [Volume 24, Issue 5, 2017, Pages 2515-2526]
  • Rahimian, M. Three-dimensional axisymmetric responses of exponentially graded transversely isotropic tri-materials under interfacial loading [Volume 24, Issue 3, 2017, Pages 966-978]
  • Rahmani, D. A new proactive-reactive approach to hedge against uncertain processing times and unexpected machine failures in the two-machine flow shop scheduling problems [Volume 24, Issue 3, 2017, Pages 1571-1584]
  • Rahmani, O. An analytical solution for bending, buckling, and free vibration of FG nanobeam lying on Winkler-Pasternak elastic foundation using different nonlocal higher order shear deformation beam theories [Volume 24, Issue 3, 2017, Pages 1635-1653]
  • Rahnama, M. Particle flow simulation in a channel with symmetric protuberances using combination of lattice Boltzmann and smoothed profile methods [Volume 24, Issue 4, 2017, Pages 1940-1949]
  • Rai, Dhiraj P. A new optimization algorithm for parameter optimization of nano-finishing processes [Volume 24, Issue 2, 2017, Pages 868-875]
  • Rajabi-Zeleti, Sareh Mechanical reinforcement of urinary bladder matrix by electrospun polycaprolactone nanofibers [Volume 24, Issue 6, 2017, Pages 3476-3480]
  • Rakhshandehroo, Gholamreza Uncertainty analysis of open channel flow: stochastic approach to Advection–Diffusion equation [Volume 24, Issue 5, 2017, Pages 2262-2270]
  • Rakhshandehroo, G. R. Innovative Analytical Solutions to 1, 2 and 3D Water Infiltration into Unsaturated Soils for Initial-Boundary Value Problems [Volume 24, Issue 5, 2017, Pages 2346-2368]
  • Ramakrishna, Seeram Impact of electrospun Tecophilic/gelatin scaffold biofunctionalization on proliferation of vascular smooth muscle cells [Volume 24, Issue 6, 2017, Pages 3458-3465]
  • Ramazani S.A., A. Investigating the effect of hybrid silica nanoparticles- copolymer on increasing oil recovery in a three dimensional porous media [Volume 24, Issue 6, 2017, Pages 3466-3475]
  • Ramezanian, Reza A new mathematical model for integrated production planning and scheduling problem in capacitated flexible flow shop with sequence-dependent setups [Volume 24, Issue 5, 2017, Pages 2501-2514]
  • Ramly, N. A. Zero and nonzero normal fluxes of thermal radiative boundary layer flow of nanofluid over a radially stretched surface [Volume 24, Issue 6, 2017, Pages 2895-2903]
  • Ramyar, Mohammad Optimizing Reliability and Cost of system for Aggregate Production Planning in Supply Chain [Volume 24, Issue 6, 2017, Pages 3394-3408]
  • Ranjbaran, A. Innovative theory for the compliance computation in rotors [Volume 24, Issue 4, 2017, Pages 1779-1788]
  • Ranjbaran, M. Innovative theory for the compliance computation in rotors [Volume 24, Issue 4, 2017, Pages 1779-1788]
  • Ranjineh khojasteh, R. Preference of Nano porous graphene to Single-Walled Carbon Nanotube (SWCNT) for preparing Silica Nano hybrid Pickering Emulsion for potential Chemical Enhanced Oil Recovery (C-EOR) [Volume 24, Issue 6, 2017, Pages 3491-3499]
  • Rao, Congjun Multidimensional Knapsack Problem Based on Uncertain Measure [Volume 24, Issue 5, 2017, Pages 2527-2539]
  • Rao, R. Venkata A new optimization algorithm for parameter optimization of nano-finishing processes [Volume 24, Issue 2, 2017, Pages 868-875]
  • Rasekh, S. Adaptive mesh-free lower bound limit analysis using non-linear programming [Volume 24, Issue 6, 2017, Pages 2793-2802]
  • Rashidi, A.M. Preference of Nano porous graphene to Single-Walled Carbon Nanotube (SWCNT) for preparing Silica Nano hybrid Pickering Emulsion for potential Chemical Enhanced Oil Recovery (C-EOR) [Volume 24, Issue 6, 2017, Pages 3491-3499]
  • Rashit, Omarov Integrated system for the use of solar energy in the animal farm [Volume 24, Issue 6, 2017, Pages 3213-3222]
  • Rasouli, Seyedeh Mansooreh A fuzzy dynamic multi-objective, multi-item model by considering customer satisfaction in supply chain [Volume 24, Issue 5, 2017, Pages 2623-2639]
  • Rastegar, M.A. Detecting shoreline changes in Chabahar Bay by processing satellite images [Volume 24, Issue 4, 2017, Pages 1802-1809]
  • Razak, D.M. Surface modification of biomaterial embedded with pits using die sinker machine [Volume 24, Issue 4, 2017, Pages 1901-1911]
  • Razzazi, M. Time complexity of two disjoint simple paths [Volume 24, Issue 3, 2017, Pages 1335-1343]
  • Refaeinejad, V. An analytical solution for bending, buckling, and free vibration of FG nanobeam lying on Winkler-Pasternak elastic foundation using different nonlocal higher order shear deformation beam theories [Volume 24, Issue 3, 2017, Pages 1635-1653]
  • Rezaee, Amin A novel approach for automatic model-based test case generation [Volume 24, Issue 6, 2017, Pages 3132-3147]
  • Rezaei, Shahbaz CMORC: Class-based Multipath On-demand Routing Protocol for Cognitive Radio Networks [Volume 24, Issue 6, 2017, Pages 3117-3131]
  • Rezaie, Amirhossein Time difference of arrival estimation of sound source using Cross Correlation and modified maximum likelihood weighting function [Volume 24, Issue 6, 2017, Pages 3268-3279]
  • Rezvani, M.A. Discrete mass modeling for dynamic response of buildings in the vicinity of railway tracks due to train-induced ground vibrations [Volume 24, Issue 4, 2017, Pages 1922-1939]
  • Riaz, M. On enhanced sensitivity of nonparametric EWMA control charts for process monitoring [Volume 24, Issue 1, 2017, Pages 424-438]
  • Riaz, M. Monitoring of serially correlated processes using residual control charts [Volume 24, Issue 3, 2017, Pages 1603-1614]
  • Riaz, M. Performance evaluation of joint monitoring control charts [Volume 24, Issue 4, 2017, Pages 2152-2163]
  • Riaz, Muhammad New EWMA S2 Control Charts for Monitoring Process Dispersion [Volume 24, Issue 1, 2017, Pages 378-389]
  • Riaz, Muhammad NEW MEMORY-TYPE CONTROL CHARTS FOR MONITORING PROCESS MEAN AND DISPERSION [Volume 24, Issue 6, 2017, Pages 3423-3438]
  • Roghanian, E. The combination of TOPSIS method and Dijkstra’s algorithm in multi-attribute routing [Volume 24, Issue 5, 2017, Pages 2540-2549]
  • Roghanian, Emad Reliability analysis of a warm standby repairable system with two cases of imperfect switching mechanism [Volume 24, Issue 2, 2017, Pages 808-822]
  • Roozbeh Nia, Ali Energy-conscious dynamic sequencing method for dual command cycle unit-load multiple-rack automated storage and retrieval systems [Volume 24, Issue 6, 2017, Pages 3371-3393]
  • Roshan, G. Wind turbines design corrections for next Galicia climatic conditions [Volume 24, Issue 3, 2017, Pages 926-932]
  • Rouhollahi, R. Numerical study on the effect of the concave rigid boundaries on the cavitation intensity [Volume 24, Issue 4, 2017, Pages 1958-1965]
  • Rowshanzamir, M.A. Evaluation of behavior of bucket foundations under pure loading [Volume 24, Issue 6, 2017, Pages 2803-2816]
  • Rozati, S.M. Synthesis and antimicrobial properties of ZnO/PVA, CuO/PVA, and TiO2/PVA nanocomposites [Volume 24, Issue 3, 2017, Pages 1717-1723]
  • R. Rofooei, Fayaz On the Evolutionary Characteristics of the Acceleration Records Generated From Linear Time-Variant Systems [Volume 24, Issue 6, 2017, Pages 2817-2831]

S

  • Saadat Foumani, M. Hand acceleration measurement by Kinect for rehabilitation applications [Volume 24, Issue 1, 2017, Pages 191-201]
  • Saadatzi, Mohammad Hossein A Robust Proportion-Preserving Composite Objective Function for Scale-Invariant Multi-Objective Optimization [Volume 24, Issue 6, 2017, Pages 2977-2991]
  • Saboury, Ali Akbar Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
  • Sabzi, A. Reliability analysis of foundation settlement by stochastic response surface and random finite element method [Volume 24, Issue 6, 2017, Pages 2741-2751]
  • Sadegh Amalnick, M. A robust optimization approach for an inventory problem with emergency ordering and product substitution in an uncertain environment: A case study in pharmaceutical industry [Volume 24, Issue 3, 2017, Pages 1533-1546]
  • Sadeghi, Meisam Reliability analysis of a warm standby repairable system with two cases of imperfect switching mechanism [Volume 24, Issue 2, 2017, Pages 808-822]
  • Sadeghi Bajestani, Ghasem Poincaré Section based Biomarkers of Hemispheric Asymmetry, applied to Autism Spectrum Disorder [Volume 24, Issue 6, 2017, Pages 3257-3267]
  • Sadeghi Balkanlou, V. Effects of petrochemical wastes incinerator ash powder instead of Portland cement on the properties of concrete [Volume 24, Issue 3, 2017, Pages 1017-1026]
  • Sadi-Nezhad, Soheil A multi-objective multi-echelon green supply chain network design problem with risk-averse retailers in an uncertain environment [Volume 24, Issue 1, 2017, Pages 413-423]
  • Sadrnejad, S.A. An Anisotropic Multi-plane Elastic-Damage Model with Axial and Shear Damage and Its Application to Concrete Behavior [Volume 24, Issue 5, 2017, Pages 2202-2212]
  • Sadrnezhaad, S.K. Effect of Cu2+ ion on Biological Performance of Nanostructured Fluorapatite Doped with Copper [Volume 24, Issue 6, 2017, Pages 2845-2855]
  • Saeedi Heydari, M. Various types of ceramics used in radome: A review [Volume 24, Issue 3, 2017, Pages 1136-1147]
  • Safaei-Ghomi, J. A Flexible one-pot synthesis of pyrazolopyridines catalyzed by Fe3O4@SiO2-SO3H nanocatalyst under microwave irradiation [Volume 24, Issue 3, 2017, Pages 1209-1219]
  • Saffar Avval, Majid Effects of non-equilibrium condensation on aerodynamics of the flow field in a steam turbine cascade [Volume 24, Issue 2, 2017, Pages 624-634]
  • Saffar - Avval, Majid Generalized Heat Transfer and Entropy Generation of Stratified Air-Water Flow in Entrance of a Mini-channel [Volume 24, Issue 5, 2017, Pages 2407-2417]
  • Saffarzadeh, M. Simultaneous Train Rescheduling through Cancelling, Delaying and Re-Ordering Policies: Three-Phase Solution Method with Guaranteed Optimality [Volume 24, Issue 1, 2017, Pages 121-135]
  • Saghaei, Abbas A new mathematical model for a scheduling problem of dynamic machine-tool selection and operation allocation in a flexible manufacturing system: A modified evolutionary algorithm [Volume 24, Issue 2, 2017, Pages 765-777]
  • Saghaei, Abbas Energy-conscious dynamic sequencing method for dual command cycle unit-load multiple-rack automated storage and retrieval systems [Volume 24, Issue 6, 2017, Pages 3371-3393]
  • Saha, P. A new algorithm for the computation of the decimals of the inverse [Volume 24, Issue 3, 2017, Pages 1363-1372]
  • Saidi, M.H. Economic and Environmental Evaluations of Different Operation Alternatives of an Aquifer Thermal Energy Storage in Tehran, Iran [Volume 24, Issue 2, 2017, Pages 610-623]
  • Saidi, M.H. Numerical simulation of the effect of visitor's movement on bacteria-carrying particles distribution in hospital isolation room [Volume 24, Issue 3, 2017, Pages 1160-1170]
  • Saidi, Mohammad Hassan Experimental and theoretical investigation on spray characteristics of bio-ethanol blends using a direct injection system [Volume 24, Issue 1, 2017, Pages 237-248]
  • Saidi, Mohammad Said Airflow patterns in a 3D model of the human acinus [Volume 24, Issue 5, 2017, Pages 2379-2386]
  • Saidi, M.S. Submicron particle deposition in pulmonary alveoli during cyclic breathing [Volume 24, Issue 4, 2017, Pages 1975-1984]
  • Salami, N. First-principles study of strain-induced charge polarization in a molybdenum disulfide monolayer [Volume 24, Issue 3, 2017, Pages 1724-1733]
  • Salami Hosseini, Mahdi Investigating the viscoelastic fluid behavior in hollow fiber membrane fabrication process using Giesekus' model [Volume 24, Issue 6, 2017, Pages 3053-3063]
  • Salarieh, H. Parameter identification of a parametrically excited rate micro-gyroscope using recursive least squares method [Volume 24, Issue 4, 2017, Pages 1889-2019]
  • Salarieh, H. Induced generalized interval neutrosophic Shapley hybrid operators and their application in multi-attribute decision making [Volume 24, Issue 4, 2017, Pages 2164-2181]
  • Saleh, Aboozar Tubular Web RBS Connection to Improve Seismic Behavior of Moment Resisting Steel Frames [Volume 24, Issue 6, 2017, Pages 2726-2740]
  • Salehi, S.M. A new technique of the irst and second limits" for wagon maintenance in railway tracks consisting of sharp curves based on the empirical study of wheel wear [Volume 24, Issue 3, 2017, Pages 1171-1180]
  • Salehi Neyshabouri, S.A.A. The objective design of triangular bucket for dam's spillway using Non-dominated Sorting Genetic Algorithm II: NSGA-II [Volume 24, Issue 1, 2017, Pages 19-27]
  • Saleh jalali, Reza Strain Rate Effect in the Mesoscopic Modeling of High-Strength Steel Fiber-Reinforced Concrete [Volume 24, Issue 2, 2017, Pages 512-525]
  • Salimi asl, Aydin Applying a multi sensor system to predict and simulate the tool wear using of artificial neural networks [Volume 24, Issue 6, 2017, Pages 2864-2874]
  • Salmasnia, A. A computational approach to economic production quantity model for perishable products with backordering shortage and stock-dependent demand [Volume 24, Issue 4, 2017, Pages 2138-2151]
  • Salmasnia, Ali A Multi-Objective Multi-State Degraded System to Optimize Maintenance/Repair Costs and System Availability [Volume 24, Issue 1, 2017, Pages 355-363]
  • Samanipour, K. Effects of viscoelastic supports on the behavior of bridges under moving vehicles [Volume 24, Issue 4, 2017, Pages 1751-1769]
  • Sanayei, Hamed Reza Zarif Innovative Analytical Solutions to 1, 2 and 3D Water Infiltration into Unsaturated Soils for Initial-Boundary Value Problems [Volume 24, Issue 5, 2017, Pages 2346-2368]
  • Sanchez, J.M. On the solution of a contact problem for a rhombus weakened with a full-strength hole [Volume 24, Issue 1, 2017, Pages 183-190]
  • Sapawe, N. Surface modification of biomaterial embedded with pits using die sinker machine [Volume 24, Issue 4, 2017, Pages 1901-1911]
  • Saravanan, P. Topological and non-topological soliton solution of the 1 + 3 dimensional Gross-Pitaevskii equation with quadratic potential term [Volume 24, Issue 5, 2017, Pages 2429-2435]
  • Sarkar, B. Human errors incorporation in work-in-process group manufacturing system [Volume 24, Issue 4, 2017, Pages 2050-2061]
  • Sarvari Karajabad, Masoumeh Pyridylmethylaminoacetic acid functionalized Fe3O4 magnetic nanorods as an efficient catalyst for the synthesis of 2-aminochromene and 2-aminopyran derivatives [Volume 24, Issue 6, 2017, Pages 3022-3031]
  • Sasireka, K. Optimization of Hedging Rules for Hydropower Reservoir Operation [Volume 24, Issue 5, 2017, Pages 2242-2252]
  • Sayed Razavi, Mohammad Theoretical and computational investigation of optimal wall shear stress in bifurcations: a generalization of Murray’s law [Volume 24, Issue 5, 2017, Pages 2387-2395]
  • Sayevand, K. A reliable implicit difference scheme for treatments of fourth-order fractional sub-diffusion equation [Volume 24, Issue 3, 2017, Pages 1100-1107]
  • Sedighin, S. Effiiently computing the smallest axis-parallel squares spanning all colors [Volume 24, Issue 3, 2017, Pages 1325-1334]
  • Seif, Mohammad Saeed Evaluation of planing craft maneuverability using mathematical modeling under the action of the rudder [Volume 24, Issue 1, 2017, Pages 293-301]
  • Seifbarghy, M. Sustainable supply chain design with water environmental impacts and justice-oriented employment considerations: A case study in textile industry [Volume 24, Issue 4, 2017, Pages 2119-2137]
  • Sepahvand, A. Time complexity of two disjoint simple paths [Volume 24, Issue 3, 2017, Pages 1335-1343]
  • Setak, Mostafa Selecting unique suppliers through winner determination in combinatorial reverse auction: scatter search algorithm [Volume 24, Issue 6, 2017, Pages 3297-3307]
  • Seyedabrishami, S. E. Simultaneous Train Rescheduling through Cancelling, Delaying and Re-Ordering Policies: Three-Phase Solution Method with Guaranteed Optimality [Volume 24, Issue 1, 2017, Pages 121-135]
  • Seyyedsalehi, S. A. An Optimum Neural Network for Evolutionary Aerodynamic Shape Design [Volume 24, Issue 5, 2017, Pages 2490-2500]
  • Shabani, Ali. Akbar Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
  • Shabani, R. Stress Analyses in Single Deck and Double Deck Floating Roofs Subjected to Earthquake Ground Motions [Volume 24, Issue 2, 2017, Pages 727-739]
  • Shabanpour, N. Sequencing of mixed models on U-shaped assembly lines by considering effective help policies in make-to-order environment [Volume 24, Issue 3, 2017, Pages 1493-1504]
  • Shademani, Roya Numerical Assessment of turbulence effect on Forces, Spray parameters, and secondary impact in wedge water entry problem using k-ε method [Volume 24, Issue 1, 2017, Pages 223-236]
  • Shafi, AliAkbar Two-warehouse inventory model for deteriorating items with imperfect quality under the conditions of permissible delay in payments [Volume 24, Issue 1, 2017, Pages 390-412]
  • Shafieyanb, C. Strength and elastic moduli of a concrete bridge using advanced nondestructive techniques [Volume 24, Issue 3, 2017, Pages 942-952]
  • Shahabi, Ali An integrated train scheduling and infrastructure development model in railway networks [Volume 24, Issue 6, 2017, Pages 3409-3422]
  • Shahbazi, Kh. Experimental study of rheological properties of aphron based drilling Fluids and their effects on formation damage [Volume 24, Issue 3, 2017, Pages 1241-1252]
  • Shahbazi-Alavi, H. A Flexible one-pot synthesis of pyrazolopyridines catalyzed by Fe3O4@SiO2-SO3H nanocatalyst under microwave irradiation [Volume 24, Issue 3, 2017, Pages 1209-1219]
  • Shahi, Sh. Evaluation of physical and mechanical properties of B-tri-calcium phosphate/poly-3-hydroxybutyrate nanocomposite scaffold for bone tissue engineering application [Volume 24, Issue 3, 2017, Pages 1654-1668]
  • Shahmohamadi, M. Three-dimensional axisymmetric responses of exponentially graded transversely isotropic tri-materials under interfacial loading [Volume 24, Issue 3, 2017, Pages 966-978]
  • Shahmohamadi, Mohammad Amin Effects of shear deformation on Mechanical and thermo-mechanical nonlinear stability of FGM shallow spherical shells subjected to uniform external pressure [Volume 24, Issue 2, 2017, Pages 584-596]
  • Shahriari-kahkeshi, M. Robust fault detection and isolation scheme using fuzzy wavelet network with a hybrid design algorithm [Volume 24, Issue 3, 2017, Pages 1467-1481]
  • Shahtahmasebi, N. Synthesis and antimicrobial properties of ZnO/PVA, CuO/PVA, and TiO2/PVA nanocomposites [Volume 24, Issue 3, 2017, Pages 1717-1723]
  • Shakeri Kebria, Z. The combination of TOPSIS method and Dijkstra’s algorithm in multi-attribute routing [Volume 24, Issue 5, 2017, Pages 2540-2549]
  • Shakibayifar, Masoud An integrated train scheduling and infrastructure development model in railway networks [Volume 24, Issue 6, 2017, Pages 3409-3422]
  • Shakoor, M.H. Repeating average filter for noisy texture classification [Volume 24, Issue 3, 2017, Pages 1419-1436]
  • Shams, Sh. Impact crushing behavior of foam-filled paraboloid shells using numerical and experimental methods [Volume 24, Issue 4, 2017, Pages 1912-1921]
  • Shariatmadari, N. Experimental study on behavior of soil-waste tire mixtures [Volume 24, Issue 1, 2017, Pages 65-71]
  • Sheikhani, Ali Poincaré Section based Biomarkers of Hemispheric Asymmetry, applied to Autism Spectrum Disorder [Volume 24, Issue 6, 2017, Pages 3257-3267]
  • Shekarappa, Sharath Synthesis of Nα-protected formamides from amino acids using MgO nano catalyst: Study of molecular docking and antibacterial activity [Volume 24, Issue 6, 2017, Pages 3002-3013]
  • Shervani-Tabar, M.T. Numerical study on the effect of the concave rigid boundaries on the cavitation intensity [Volume 24, Issue 4, 2017, Pages 1958-1965]
  • Shi, Z.S. Optimal design of grid-connected hybrid renewable energy systems using multi-objective evolutionary algorithm [Volume 24, Issue 6, 2017, Pages 3148-3156]
  • Shirani, Ebrahim Theoretical and computational investigation of optimal wall shear stress in bifurcations: a generalization of Murray’s law [Volume 24, Issue 5, 2017, Pages 2387-2395]
  • Shojaei, A. pH-Responsive Nanostructured Polyaniline Capsules for Self-Healing Corrosion Protection: The Influence of Capsule Concentration [Volume 24, Issue 6, 2017, Pages 3512-3520]
  • Shojaie, S. Design of an innovative construction model for supply chain management by measuring agility and cost of quality: An empirical study [Volume 24, Issue 5, 2017, Pages 2515-2526]
  • Shojaosadati, Seyed Abbas Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
  • Shokran Neam, Alirez Attenuation Relation for Near Field Shallow Crustal Earthquakes Using NGA-West Database with Mixed-Effect Model in Comparison with Attenuation Relations for Iran [Volume 24, Issue 5, 2017, Pages 2183-2201]
  • Shokri, A.A. First-principles study of strain-induced charge polarization in a molybdenum disulfide monolayer [Volume 24, Issue 3, 2017, Pages 1724-1733]
  • Shokrollahi, Saeed An investigation into the accelerometer mounting effects on signal transmissibility in modal measurements [Volume 24, Issue 5, 2017, Pages 2436-2444]
  • Shooshpasha, Issa Polynomial Models Controlling Strength of Zeolite-Cement-Sand Mixtures [Volume 24, Issue 2, 2017, Pages 526-536]
  • Silberschmidt, Vadim V. Dynamic Behaviour of β-Ti-15333 in Ultrasonically Assisted Turning: Experimental and Numerical Analysis [Volume 24, Issue 6, 2017, Pages 2904-2914]
  • Simab, A. Using integrated method to rank the power system contingency [Volume 24, Issue 3, 2017, Pages 1373-1383]
  • Simab, M. Using integrated method to rank the power system contingency [Volume 24, Issue 3, 2017, Pages 1373-1383]
  • Sinaeian, Fereidoon Ground Motion Prediction Equation for Inelastic Spectral Displacement in Iran [Volume 24, Issue 1, 2017, Pages 164-182]
  • Sivasankaran, S. Hydro-magnetic mixed convection in a lid-driven cavity with partially thermally active walls [Volume 24, Issue 1, 2017, Pages 153-163]
  • Sivasankaran, S. Chemical reaction, soret and dufour effects on MHD mixed convection stagnation point flow with radiation and slip condition [Volume 24, Issue 2, 2017, Pages 698-706]
  • Sivasankaran, S. Zero and nonzero normal fluxes of thermal radiative boundary layer flow of nanofluid over a radially stretched surface [Volume 24, Issue 6, 2017, Pages 2895-2903]
  • Slushash, Abdygaliyeva Integrated system for the use of solar energy in the animal farm [Volume 24, Issue 6, 2017, Pages 3213-3222]
  • Sohrabi Gilani, Morteza Stability analysis of arch dam abutments due to seismic loading [Volume 24, Issue 2, 2017, Pages 467-475]
  • Sohrabpour, S. A new technique of the irst and second limits" for wagon maintenance in railway tracks consisting of sharp curves based on the empirical study of wheel wear [Volume 24, Issue 3, 2017, Pages 1171-1180]
  • Solaimany Nazar, A.R. Degradation of furfural in contaminated water by titanium and iron oxide nanophotocatalysts based on the natural zeolite (clinoptilolite) [Volume 24, Issue 3, 2017, Pages 1221-1229]
  • Soleymani Shishvan, S. Effects of particle shape and size distribution on particle size-dependent flow strengthening in metal matrix composites [Volume 24, Issue 3, 2017, Pages 1091-1099]
  • Solimanpur, M. Development of Supply Chain Strategy in Iranian Automotive Industry Based on System Dynamics and Game Theory [Volume 24, Issue 6, 2017, Pages 3345-3354]
  • Soltani, M.R. Effect of wind tunnel wall porosity on the flow around an oscillating airfoil at transonic speeds [Volume 24, Issue 3, 2017, Pages 1069-1076]
  • Soltani, N. Seismic Wave Scatter Study in Valleys Using Coupled 2D Finite Element Approach and Absorbing Boundaries [Volume 24, Issue 1, 2017, Pages 110-120]
  • Soltani-Dehnavi, Sh. Copper-doped and copper-free bioactive glass nanopowders cytotoxicity and antibacterial activity assessment [Volume 24, Issue 3, 2017, Pages 1706-1716]
  • Soofi, Parham An ANN-based optimization model for facility layout problem using simulation Technique [Volume 24, Issue 1, 2017, Pages 364-377]
  • Subbulekshmi, N.L. Enhanced heterogeneous wet hydrogen peroxide catalytic oxidation performance of fly ash-derived zeolite by CuO incorporation [Volume 24, Issue 3, 2017, Pages 1189-1202]
  • Subramanian, E. Enhanced heterogeneous wet hydrogen peroxide catalytic oxidation performance of fly ash-derived zeolite by CuO incorporation [Volume 24, Issue 3, 2017, Pages 1189-1202]
  • Syahrullail, S. A new approach for cold extrusion process: Dimples indentation on sliding contact surface and palm oil as an alternative lubricant [Volume 24, Issue 6, 2017, Pages 2875-2886]
  • Syahrullail, S. Surface modification of biomaterial embedded with pits using die sinker machine [Volume 24, Issue 4, 2017, Pages 1901-1911]

T

  • Tabatabaee, N. Effects of moisture on warm mix asphalt containing Sasobit [Volume 24, Issue 4, 2017, Pages 1866-1873]
  • Tabkhi Wayghan, Amir Reza The effect of gusset plate in moment-rotation behavior of double-web angle connection, in braced frames [Volume 24, Issue 6, 2017, Pages 2712-2725]
  • Tafakori, Ehsan Assessment of Collapse Modes in Reinforced Concrete Frames Considering Record-to-Record and Modeling Uncertainties [Volume 24, Issue 5, 2017, Pages 2213-2226]
  • Taghavifard, M.T. Bi-level programming for supplier selection under quantity discount policy [Volume 24, Issue 4, 2017, Pages 2095-2104]
  • Taghikhany, Touraj Attenuation Relation for Near Field Shallow Crustal Earthquakes Using NGA-West Database with Mixed-Effect Model in Comparison with Attenuation Relations for Iran [Volume 24, Issue 5, 2017, Pages 2183-2201]
  • Taheri Taromsari, M. Optimum two-dimensional crack modeling in discrete least-squares meshless method by charged system search algorithm [Volume 24, Issue 1, 2017, Pages 143-152]
  • Tahghighi, H. Influence of foundation flexibility on the seismic response of low-to-mid-rise moment-resisting frame buildings [Volume 24, Issue 3, 2017, Pages 979-992]
  • Tahmoresnezhad, J. DiReT: An effective discriminative dimensionality reduction approach for multi-source transfer learning [Volume 24, Issue 3, 2017, Pages 1303-1311]
  • Tajalli, M. Dynamic load testing of a railway masonry arch bridge: A case study of Babak Bridge [Volume 24, Issue 4, 2017, Pages 1834-1842]
  • Tajeripour, F. Repeating average filter for noisy texture classification [Volume 24, Issue 3, 2017, Pages 1419-1436]
  • Talebbeydokhti, N. Uncertainty analysis of open channel flow: stochastic approach to Advection–Diffusion equation [Volume 24, Issue 5, 2017, Pages 2262-2270]
  • Talebbeydokhti, N. Innovative Analytical Solutions to 1, 2 and 3D Water Infiltration into Unsaturated Soils for Initial-Boundary Value Problems [Volume 24, Issue 5, 2017, Pages 2346-2368]
  • Talebi, S. Amplitude reconstruction of clipped OFDM by using DFT-based least squares [Volume 24, Issue 3, 2017, Pages 1353-1362]
  • Taleizadeh, A.A. Vendor-managed inventory system with partial backordering for evaporating chemical raw material [Volume 24, Issue 3, 2017, Pages 1483-1492]
  • Tale Masouleh, Mehdi A Robust Proportion-Preserving Composite Objective Function for Scale-Invariant Multi-Objective Optimization [Volume 24, Issue 6, 2017, Pages 2977-2991]
  • Tamannaei, M. Simultaneous Train Rescheduling through Cancelling, Delaying and Re-Ordering Policies: Three-Phase Solution Method with Guaranteed Optimality [Volume 24, Issue 1, 2017, Pages 121-135]
  • Tamer Ozdemir, A. Effect of deep sub-zero treatment on mechanical properties of AA5XXX aluminum plates adjoined by MIG welding technique [Volume 24, Issue 4, 2017, Pages 1950-1957]
  • Tang, G.L. Induced generalized interval neutrosophic Shapley hybrid operators and their application in multi-attribute decision making [Volume 24, Issue 4, 2017, Pages 2164-2181]
  • Tariverdilo, S. Stress Analyses in Single Deck and Double Deck Floating Roofs Subjected to Earthquake Ground Motions [Volume 24, Issue 2, 2017, Pages 727-739]
  • Tavakkoli-Moghaddam, R. Design of an innovative construction model for supply chain management by measuring agility and cost of quality: An empirical study [Volume 24, Issue 5, 2017, Pages 2515-2526]
  • Tavakkoli-Moghaddam, Reza A new mathematical model for a scheduling problem of dynamic machine-tool selection and operation allocation in a flexible manufacturing system: A modified evolutionary algorithm [Volume 24, Issue 2, 2017, Pages 765-777]
  • Tavakkoli-Moghaddam, Reza A capacitated bike sharing location-allocation problem under demand uncertainty using sample average approximation: A greedy Genetic-Particle Swarm Optimization algorithm [Volume 24, Issue 5, 2017, Pages 2567-2580]
  • Tavakoli, A. n-pentane isomerization over Pt-Al promoted sulfated zirconia nanocatalyst [Volume 24, Issue 3, 2017, Pages 1264-1271]
  • Tayaranian Marvian, Amir Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
  • Tchier, F. Nonsingular fast terminal sliding-mode stabilizer for a class of uncertain nonlinear systems based on disturbance observer [Volume 24, Issue 3, 2017, Pages 1410-1418]
  • Teimouri, M. A prototype-based classification using extended imperialist competitive algorithm [Volume 24, Issue 4, 2017, Pages 2062-2081]
  • Teimoury, Ebrahim An Integrated Pricing and Inventory Model for Deteriorating Products in a two stage supply chain under Replacement and Shortage [Volume 24, Issue 1, 2017, Pages 342-354]
  • Tekeli, H. An experimental study of the seismic behavior of infilled RC frames with opening [Volume 24, Issue 5, 2017, Pages 2271-2282]
  • Terryn, H. pH-Responsive Nanostructured Polyaniline Capsules for Self-Healing Corrosion Protection: The Influence of Capsule Concentration [Volume 24, Issue 6, 2017, Pages 3512-3520]
  • Thomas, A. Spectral method for PEMFC operation mode monitoring based on electrical fluctuation analysis [Volume 24, Issue 3, 2017, Pages 1437-1447]
  • Tiberto, Paola The effects of thickness on magnetic properties of FeCuNbSiB sputtered thin films [Volume 24, Issue 6, 2017, Pages 3521-3525]
  • TIigdemir, M. Fatigue life prediction of the modified asphalt mixtures with ANFIS modeling [Volume 24, Issue 1, 2017, Pages 72-81]
  • Timnak, N. An Optimum Neural Network for Evolutionary Aerodynamic Shape Design [Volume 24, Issue 5, 2017, Pages 2490-2500]
  • Ting, Pin-Shou A simple solution procedure to solve the multi-delivery policy into economic production lot size problem with partial rework [Volume 24, Issue 5, 2017, Pages 2640-2644]
  • Tiwari, Sunil Two-warehouse inventory model for deteriorating items with imperfect quality under the conditions of permissible delay in payments [Volume 24, Issue 1, 2017, Pages 390-412]
  • Tran, Ngoc - Cuong A One-Parameter Controlled Dissipative Unconditionally Stable Explicit Algorithm for Time History Analysis [Volume 24, Issue 5, 2017, Pages 2307-2319]
  • Tripathi, Alka Some improved interactive aggregation operators under interval-valued intuitionistic fuzzy environment and its application to decision making process [Volume 24, Issue 5, 2017, Pages 2581-2604]
  • Tuzandejani, H. Impact crushing behavior of foam-filled paraboloid shells using numerical and experimental methods [Volume 24, Issue 4, 2017, Pages 1912-1921]

U

  • Ullah, Hakeem MHD boundary layer flow of an incompressible upper convected Maxwell fluid by Optimal Homotopy Asymptotic Method. [Volume 24, Issue 1, 2017, Pages 202-210]
  • Ullah, Himayat Dynamic Behaviour of β-Ti-15333 in Ultrasonically Assisted Turning: Experimental and Numerical Analysis [Volume 24, Issue 6, 2017, Pages 2904-2914]
  • Ullah, M. Human errors incorporation in work-in-process group manufacturing system [Volume 24, Issue 4, 2017, Pages 2050-2061]
  • Umer, M. An integrated approach of quality for polymer composite manufacturing validated and optimized through Taguchi method [Volume 24, Issue 4, 2017, Pages 1985-1995]
  • Uygur, I. Effect of deep sub-zero treatment on mechanical properties of AA5XXX aluminum plates adjoined by MIG welding technique [Volume 24, Issue 4, 2017, Pages 1950-1957]
  • Uysal, Handan Toxic Effects of Chronic Feeding with Food Azo Dyes on Drosophila melanogaster Oregon R [Volume 24, Issue 6, 2017, Pages 3081-3086]
  • Uzun, M. Effect of deep sub-zero treatment on mechanical properties of AA5XXX aluminum plates adjoined by MIG welding technique [Volume 24, Issue 4, 2017, Pages 1950-1957]

V

  • Vafaei, Abbas Ali Neurotoxicity of pre-incubated alpha-synuclein with neutral nanoliposomes on PC12 and SHSY5Y cell lines [Volume 24, Issue 6, 2017, Pages 3542-3553]
  • Vafai, H. Effects of viscoelastic supports on the behavior of bridges under moving vehicles [Volume 24, Issue 4, 2017, Pages 1751-1769]
  • Vafamand, A . Investigating the experimental behavior of the reinforcements effect on the railway traverse under the dynamic load [Volume 24, Issue 5, 2017, Pages 2253-2261]
  • Vahdati Khaki, Jalil Effect of Cu2+ ion on Biological Performance of Nanostructured Fluorapatite Doped with Copper [Volume 24, Issue 6, 2017, Pages 2845-2855]
  • Vahid, Amir H2S Removal Using ZnO/SBA-3: New Synthesis Route and Optimization of Process Parameters [Volume 24, Issue 6, 2017, Pages 3064-3073]
  • Valtierra-Rodriguez, M. Current efforts for prediction and assessment of natural disasters: Earthquakes, tsunamis, volcanic eruptions, hurricanes, tornados, and floods [Volume 24, Issue 6, 2017, Pages 2645-2664]
  • Varghese, J. Frequency-domain-based switching median filter for the restoration of images corrupted with high-density periodic noise [Volume 24, Issue 3, 2017, Pages 1312-1324]
  • Vatankhah, Elham Impact of electrospun Tecophilic/gelatin scaffold biofunctionalization on proliferation of vascular smooth muscle cells [Volume 24, Issue 6, 2017, Pages 3458-3465]
  • Vatanparast, M. Impact crushing behavior of foam-filled paraboloid shells using numerical and experimental methods [Volume 24, Issue 4, 2017, Pages 1912-1921]
  • Veiskarami, Mehdi Stability of Supported Vertical Cuts in Granular Matters in Presence of the Seepage Flow by a Semi-Analytical Approach [Volume 24, Issue 2, 2017, Pages 537-550]
  • Vossoughi, M. Comparison and optimization of conjugated linoleic acid production by Lactobacillus plantarum and Lactobacillus plantarum subsp. plantarum [Volume 24, Issue 3, 2017, Pages 1272-1280]

W

  • Waezi, Zakariya On the Evolutionary Characteristics of the Acceleration Records Generated From Linear Time-Variant Systems [Volume 24, Issue 6, 2017, Pages 2817-2831]
  • Wang, H. Effects of edge rate of the designed line markings on the following time headway [Volume 24, Issue 4, 2017, Pages 1770-1778]
  • Wang, Jingfang Effects of leakage inductance on the input current of double star diode rectifier with active inter-phase reactor [Volume 24, Issue 6, 2017, Pages 3193-3203]
  • Wang, R. Optimal design of grid-connected hybrid renewable energy systems using multi-objective evolutionary algorithm [Volume 24, Issue 6, 2017, Pages 3148-3156]
  • Wei, B. X. Assessment of change in acoustic wave velocity of compacted expansive soil through experiments [Volume 24, Issue 1, 2017, Pages 136-142]
  • Wu, Tsui - Huang A One-Parameter Controlled Dissipative Unconditionally Stable Explicit Algorithm for Time History Analysis [Volume 24, Issue 5, 2017, Pages 2307-2319]

Y

  • YAGCI, Mustafa An alternative boom design and welding technique to minimize energy consumption during boom production [Volume 24, Issue 6, 2017, Pages 2856-2863]
  • Yaghmaei-Sabegh, S. Selection and scaling of spectrum-compatible ground motion records using hybrid coded genetic algorithms [Volume 24, Issue 3, 2017, Pages 910-925]
  • Yaghobi, Maryam Group classification of the time-fractional Kaup-Kupershmidt equation [Volume 24, Issue 1, 2017, Pages 302-307]
  • Yaghoubi, M. Surface tension simulation of free surface flows using smoothed particle hydrodynamics [Volume 24, Issue 4, 2017, Pages 2019-2033]
  • Yakhchalian, M. Reliable seismic collapse assessment of short-period structures using new proxies for ground motion record selection [Volume 24, Issue 5, 2017, Pages 2283-2293]
  • Yang, Shiyan Effects of leakage inductance on the input current of double star diode rectifier with active inter-phase reactor [Volume 24, Issue 6, 2017, Pages 3193-3203]
  • Yang, Yuan - Sen A One-Parameter Controlled Dissipative Unconditionally Stable Explicit Algorithm for Time History Analysis [Volume 24, Issue 5, 2017, Pages 2307-2319]
  • Yashiro, Hitoshi Investigation of carbon phase evolutions in titanium nitride-carbon nanocomposites prepared in supercritical benzene with respect to their lithium storage capacity [Volume 24, Issue 6, 2017, Pages 3481-3490]
  • Yazdi, S. Using integrated method to rank the power system contingency [Volume 24, Issue 3, 2017, Pages 1373-1383]
  • Yeganehdoust, F. Surface tension simulation of free surface flows using smoothed particle hydrodynamics [Volume 24, Issue 4, 2017, Pages 2019-2033]
  • Yegani, Reza Investigating the viscoelastic fluid behavior in hollow fiber membrane fabrication process using Giesekus' model [Volume 24, Issue 6, 2017, Pages 3053-3063]
  • YILDIZ, Merih A High Performance Full-Wave Rectifier Using a Single CCII-, Two Diodes and Two Resistor [Volume 24, Issue 6, 2017, Pages 3280-3286]
  • Yousefi, Elahe Investigation of carbon phase evolutions in titanium nitride-carbon nanocomposites prepared in supercritical benzene with respect to their lithium storage capacity [Volume 24, Issue 6, 2017, Pages 3481-3490]
  • Yousefpour, K. Light Oil – Gas Two-Phase Flow Pattern Identification in Different Pipe Orientations: An Experimental Approach [Volume 24, Issue 5, 2017, Pages 2445-2456]
  • YUCE, Erkan A High Performance Full-Wave Rectifier Using a Single CCII-, Two Diodes and Two Resistor [Volume 24, Issue 6, 2017, Pages 3280-3286]
  • Yue, Z. A projection-based approach to intuitionistic fuzzy group decision making [Volume 24, Issue 3, 2017, Pages 1505-1518]

Z

  • Zafari, Y. Three-dimensional axisymmetric responses of exponentially graded transversely isotropic tri-materials under interfacial loading [Volume 24, Issue 3, 2017, Pages 966-978]
  • Zahab, S. Impact crushing behavior of foam-filled paraboloid shells using numerical and experimental methods [Volume 24, Issue 4, 2017, Pages 1912-1921]
  • Zahedi, Ali Conditioning of vitrified and resin bond CBN grinding wheels using a picosecond laser [Volume 24, Issue 5, 2017, Pages 2369-2378]
  • Zaheri, F. Bi-level programming for supplier selection under quantity discount policy [Volume 24, Issue 4, 2017, Pages 2095-2104]
  • Zahrai, Seyed Mehdi Tubular Web RBS Connection to Improve Seismic Behavior of Moment Resisting Steel Frames [Volume 24, Issue 6, 2017, Pages 2726-2740]
  • Zakeri-Niri, M. Application of Neural Network Models to Improve Prediction Accuracy of Wave Run-up on Antifer Covered Breakwater [Volume 24, Issue 2, 2017, Pages 567-575]
  • Zamani, Bahman A novel approach for automatic model-based test case generation [Volume 24, Issue 6, 2017, Pages 3132-3147]
  • Zamani, S. Development of a Cournot-oligopoly model for competition of multi-product supply chains under government supervision [Volume 24, Issue 3, 2017, Pages 1519-1532]
  • Zandieh, M. Bi-level programming for supplier selection under quantity discount policy [Volume 24, Issue 4, 2017, Pages 2095-2104]
  • Zandieh, Mostafa A multi-objective multi-echelon green supply chain network design problem with risk-averse retailers in an uncertain environment [Volume 24, Issue 1, 2017, Pages 413-423]
  • Zanjireh, Yousef Time difference of arrival estimation of sound source using Cross Correlation and modified maximum likelihood weighting function [Volume 24, Issue 6, 2017, Pages 3268-3279]
  • Zarandi, Hamid R. Comparison and Analysis of Three Anomaly Correction Methods in Embedded Systems [Volume 24, Issue 6, 2017, Pages 3087-3100]
  • Zardari, Muhammad Auchar Comparison of three dimensional and two dimensional axisymmetric finite element analyses of a corner section of a tailings dam [Volume 24, Issue 5, 2017, Pages 2320-2331]
  • Zaretalab, A. A bi-objective model to optimize reliability and cost of k-out-of-n series-parallel systems with tri-state components [Volume 24, Issue 3, 2017, Pages 1585-1602]
  • Zaretalab, A. A prototype-based classification using extended imperialist competitive algorithm [Volume 24, Issue 4, 2017, Pages 2062-2081]
  • Zarrabi, M. Study of pile behavior by improvement of confining soils using frustum confining vessel [Volume 24, Issue 4, 2017, Pages 1874-1882]
  • Zegordi, S.H. Integrated production and distribution scheduling for perishable products [Volume 24, Issue 4, 2017, Pages 2105-2118]
  • Zehtabiyan - Rezaie, Navid Generalized Heat Transfer and Entropy Generation of Stratified Air-Water Flow in Entrance of a Mini-channel [Volume 24, Issue 5, 2017, Pages 2407-2417]
  • Zeinali, S. Detecting shoreline changes in Chabahar Bay by processing satellite images [Volume 24, Issue 4, 2017, Pages 1802-1809]
  • Zhang, T. Optimal design of grid-connected hybrid renewable energy systems using multi-objective evolutionary algorithm [Volume 24, Issue 6, 2017, Pages 3148-3156]
  • Zhang, X.Y. Optimal design of grid-connected hybrid renewable energy systems using multi-objective evolutionary algorithm [Volume 24, Issue 6, 2017, Pages 3148-3156]
  • Zhang, Y. Optimal design of grid-connected hybrid renewable energy systems using multi-objective evolutionary algorithm [Volume 24, Issue 6, 2017, Pages 3148-3156]
  • Zhou, Weiqi Research on the inventory control of the remanufacturing reverse logistics based on the quantitative examination [Volume 24, Issue 2, 2017, Pages 741-750]
  • Zhu, S. Effects of edge rate of the designed line markings on the following time headway [Volume 24, Issue 4, 2017, Pages 1770-1778]
  • Ziaee, M. Single machine scheduling problem with convex multi-resource dependent processing times and job deadlines [Volume 24, Issue 2, 2017, Pages 847-855]
  • Zubair Khan, M. An integrated approach of quality for polymer composite manufacturing validated and optimized through Taguchi method [Volume 24, Issue 4, 2017, Pages 1985-1995]