Scientia Iranica - Author Index

Author Index

A

Aaghaie, Abdollah Network revenue management under specific choice models [Volume 20, Issue 6, 2013, Pages 2161-2176]
Abbasian Arani, A.A. Study of Nanofluid Natural Convection in an Inclined L-Shaped Cavity [Volume 20, Issue 6, 2013, Pages 2297-2305]
Abbasnia, A. Evaluation of the modified 3D free-surface Green’s function for potential flow in a numerical towing tank [Volume 20, Issue 5, 2013, Pages 1538-1549]
Abdolmohammadi, H.R. A novel low complexity multiuser detector based on modified genetic algorithm in Direct Sequence-Code Division Multiple Access communication systems [Volume 20, Issue 6, 2013, Pages 2015-2023]
Abedi, Mostafa A Reliable Fault Tolerant Attitude Control System Based on an Adaptive Fault Detection and Diagnosis Algorithm together with a Backstepping Fault Recovery Controller [Volume 20, Issue 6, 2013, Pages 1999-2014]
Abedinnia, Hamid Consideration of transportation lags in Two-machine Flowshop scheduling problem [Volume 20, Issue 6, 2013, Pages 2215-2223]
Abolfazli Esfahani, Javad Detailed Investigation of Hydrodynamics and Thermal Behaviors of Rarefied Shear Driven Flow Using DSMC [Volume 20, Issue 4, 2013, Pages 1228-1240]
Adeli, Hojjat PLACEMENT OF CONTROL DEVICES FOR PASSIVE, SEMI-ACTIVE, AND ‎ACTIVE VIBRATION CONTROL OF STRUCTURES [Volume 20, Issue 6, 2013, Pages 1567-1578]
Afrabandpei, Fariborz Design of a multi-stage transportation network in a supply chain system: Formulation and efficient solution procedure [Volume 20, Issue 6, 2013, Pages 2188-2200]
Afsharfard, Aref An Efficient Concept for Non-dimensionalizing the Duffing Equations Based on the Parameterized Perturbation Method [Volume 20, Issue 5, 2013, Pages 1455-1463]
Afshar Najafi, Behrouz Design of a multi-stage transportation network in a supply chain system: Formulation and efficient solution procedure [Volume 20, Issue 6, 2013, Pages 2188-2200]
Aghaei, J. Mixed Integer Programming of Security-Constrained Daily Hydrothermal Generation Scheduling(SCDHGS) [Volume 20, Issue 6, 2013, Pages 2036-2050]
Aghajanzadeh, Seyyed Meisam Nonlinear Dynamic Analysis of Concrete Gravity Dam Considering Elastoplastic Constitutive Model for Foundation [Volume 20, Issue 6, 2013, Pages 1676-1684]
Ahmadi, A. Mixed Integer Programming of Security-Constrained Daily Hydrothermal Generation Scheduling(SCDHGS) [Volume 20, Issue 6, 2013, Pages 2036-2050]
Ahmadi, Ali R . Method of Fundamental Solution (MFS) coupled with particle swarm optimization (PSO) to determine optimal phreatic line in unconfined seepage problem [Volume 20, Issue 5, 2013, Pages 1327-1336]
Ahmadyfard, Alireza Extracting Common Spatial Patterns from EEG time segments for classifying Motor Imagery classes in a Brain Computer Interface (BCI) [Volume 20, Issue 6, 2013, Pages 2061-2072]
Akbari, Reza Development of a Method Based on Particle Swarm Optimization to Solve Resource Constrained Project Scheduling Problem [Volume 20, Issue 6, 2013, Pages 2123-2137]
Akbarpour, Sasan Numerical Investigation on the External Compressible Flow around NACA m1 and NACA 0015 Airfoils [Volume 20, Issue 5, 2013, Pages 1508-1516]
Alasty, Aria Multivariable control of an industrial boiler-turbine unit with nonlinear model: A comparison between gain scheduling & feedback linearization approaches [Volume 20, Issue 5, 2013, Pages 1485-1498]
Alasty, Aria Kinematic Control of a New Hyper-Redundant Manipulator with Lockable Joints [Volume 20, Issue 6, 2013, Pages 1742-1752]
Alasty, Aria Stabilization of a Vibrating Non-Classical Micro-Cantilever Using Electrostatic Actuation [Volume 20, Issue 6, 2013, Pages 1824-1831]
Alasty, Aria Optimal Sliding Mode Control for Atomic Force Microscope Tip Positioning during Nano-Manipulation Process [Volume 20, Issue 6, 2013, Pages 2285-2296]
Alinaghizadeh, Fatemeh Dimerization ofIsoquinolinium Ylide and 1,3-Dipolar Cycloaddition with Isoquinoline: Synthesis of Nitrogen-Containing Heterocyclic Compounds [Volume 20, Issue 6, 2013, Pages 1881-1884]
Al-Mamun, Mohammad Biosorption of As(III) from aqueous solution by Acacia auriculiformisleaves [Volume 20, Issue 6, 2013, Pages 1871-1880]
Almasganj, Farshad Remote Diagnosis of Unilateral Vocal Fold Paralysis Using Matching Pursuit based Features Extracted from Telephony Speech Signal [Volume 20, Issue 6, 2013, Pages 2051-2060]
Al-Talib, Azza N. Simulation of Flow Over The Side Weir Using Simulink [Volume 20, Issue 4, 2013, Pages 1094-1100]
Amidpour, Majid Design of mixed refrigerant cycle for low temperature processes using thermodynamic approach [Volume 20, Issue 4, 2013, Pages 1254-1268]
Amini-Fazl, Mohammad Sadegh Gas separation properties of crosslinked and non-crosslinked Carboxymethylcellulose (CMC)membranes [Volume 20, Issue 6, 2013, Pages 1921-1928]
Amini-sheshdeh, Zh. A new on-chip sensor design for NBTI using slew rate monitoring [Volume 20, Issue 6, 2013, Pages 2093-2098]
Ansari, R. Stability Analysis of Boron Nitride Nanotubes via a Combined Continuum-Atomistic Model [Volume 20, Issue 6, 2013, Pages 2314-2322]
A.Paèz, Carlos Sol-gel preparation and characterisation of SnO2 powders employed as catalyst for phenol photodegradation [Volume 20, Issue 6, 2013, Pages 1891-1898]
Arslan, Musa Hakan NEURAL NETWORK PREDICTION OF THE ULTIMATE CAPACITY OF SHEAR STUD CONNECTORS ON COMPOSITE BEAMS WITH PROFILED STEEL SHEETING [Volume 20, Issue 4, 2013, Pages 1101-1113]
Aryanasab, Fezzeh A Simple Approach to the Synthesis of 3-Substituted Rhodanines and Thiazolidine-2,4-diones [Volume 20, Issue 6, 2013, Pages 1833-1838]
Asadi, Hossein Impact of Stripe Unit Size on Performance and Endurance of SSD-Based RAID Arrays [Volume 20, Issue 6, 2013, Pages 1978-1998]
Asgarshamsi, A. Analytical Solution for Large amplitude Vibrations of Micro-beams Actuated by an Electro-static Force [Volume 20, Issue 5, 2013, Pages 1499-1507]
Asgharzadeh, Seyed Mohammad Rheological master curves for modified asphalt binders [Volume 20, Issue 6, 2013, Pages 1654-1661]
Azimi, Mohsen Retrofitting I-Beam to Double-I Built-up Column Connections Using Through Plates and T-Stiffeners [Volume 20, Issue 6, 2013, Pages 1695-1707]

B

Babahosseini, Hesam Optimal Sliding Mode Control for Atomic Force Microscope Tip Positioning during Nano-Manipulation Process [Volume 20, Issue 6, 2013, Pages 2285-2296]
Babakrpour, E. Analysis of Parametric Oscillations in High Power Amplifiers [Volume 20, Issue 6, 2013, Pages 2084-2092]
Badiei, Alireza Synthesis of Novel Carbon Nanostructures through Solvothermal Route [Volume 20, Issue 6, 2013, Pages 2382-2385]
Baghani, M. Analytical Solution for Large amplitude Vibrations of Micro-beams Actuated by an Electro-static Force [Volume 20, Issue 5, 2013, Pages 1499-1507]
Bagheri, Mostafa Three-axis Attitude Control Design For A Spacecraft Based On Lyapunov Stability Criteria [Volume 20, Issue 4, 2013, Pages 1302-1309]
Bagheri, Shirzad Synthesis and Characterization of Biodegradable Multiblock Copolymers of L-Lactide, e-Caprolactone and Poly(ethylene glycol) [Volume 20, Issue 6, 2013, Pages 1839-1847]
Baghlani, A. An Enhanced Particle Swarm Optimization for Design of Pin Connected Structures [Volume 20, Issue 5, 2013, Pages 1415-1432]
Baghlani, A. A New Accelerated Firefly Algorithm for Size Optimization of Truss Structures [Volume 20, Issue 6, 2013, Pages 1612-1625]
Bakhshi, H.R. A novel low complexity multiuser detector based on modified genetic algorithm in Direct Sequence-Code Division Multiple Access communication systems [Volume 20, Issue 6, 2013, Pages 2015-2023]
Bakhtiari-Nejad, Firooz Multivariable control of an industrial boiler-turbine unit with nonlinear model: A comparison between gain scheduling & feedback linearization approaches [Volume 20, Issue 5, 2013, Pages 1485-1498]
BAKIR, Yasemin The Comparison and Successive Iteration of Approximate Solution of Ordinary Differential Equation with Initial Condition by New Modified Krasnoselskii Iteration Method [Volume 20, Issue 6, 2013, Pages 1792-1804]
Bamoniri, A. Nano silica phosphoric acid: as a suitable catalyst for synthesis of trisubstituted imidazoles via sonication condition [Volume 20, Issue 6, 2013, Pages 1885-1889]
Banazadeh, M. Reliability-Based Evaluation of Load Factors using Beta Unzipping and Bayesian Methods [Volume 20, Issue 4, 2013, Pages 1175-1192]
Banitaba, Sayed Hossein An efficient method for the catalyst-free one-pot green synthesis of 2,4,5-trisubstituted imidazoles in water [Volume 20, Issue 6, 2013, Pages 1855-1862]
Bansal, Sandeep Doping assisted structural transition in copper substituted MgFe2O4 ferrite: Thermal, electrical and magnetic properties [Volume 20, Issue 6, 2013, Pages 2323-2331]
Barkhordari, M.A. Experimental Investigation of Square RC Column Strengthened with Near Surface Mounted GFRP Bars Subjected to Axial and Cyclic lateral Loads [Volume 20, Issue 5, 2013, Pages 1361-1371]
Basheer, Talal A. Simulation of Flow Over The Side Weir Using Simulink [Volume 20, Issue 4, 2013, Pages 1094-1100]
Bashiri, Mahdi Single-Item Lot-Sizing and Scheduling Problem with Deteriorating Inventory and Multiple Warehouses [Volume 20, Issue 6, 2013, Pages 2177-2187]
Beidaghy Dizaji, H. Lycopodium Dust Flame Characteristics Considering Char Yield [Volume 20, Issue 6, 2013, Pages 1781-1791]
Benhebal, Hadj Sol-gel preparation and characterisation of SnO2 powders employed as catalyst for phenol photodegradation [Volume 20, Issue 6, 2013, Pages 1891-1898]
Bidabadi, M. Spiral heat exchanger optimization using genetic algorithm [Volume 20, Issue 5, 2013, Pages 1445-1454]
Bidabadi, M. Lycopodium Dust Flame Characteristics Considering Char Yield [Volume 20, Issue 6, 2013, Pages 1781-1791]
Bildik, Necdet The Comparison and Successive Iteration of Approximate Solution of Ordinary Differential Equation with Initial Condition by New Modified Krasnoselskii Iteration Method [Volume 20, Issue 6, 2013, Pages 1792-1804]
BINICI, Hanifi INVESTIGATION OF CARBON AND ACRYLIC FIBRE– ‎REINFORCED MORTARS [Volume 20, Issue 5, 2013, Pages 1395-1400]
Bolaji, B.O. Thermodynamic Analysis of Performance of Vapour Compression Refrigeration System Working with R290 and R600a Mixtures [Volume 20, Issue 6, 2013, Pages 1720-1728]
Bolandi, Hossein A Reliable Fault Tolerant Attitude Control System Based on an Adaptive Fault Detection and Diagnosis Algorithm together with a Backstepping Fault Recovery Controller [Volume 20, Issue 6, 2013, Pages 1999-2014]
Boroomand, M. Multidimensional Modeling of CNG Direct Injection and Mixture Preparation in a SI Engine Cylinder [Volume 20, Issue 6, 2013, Pages 1729-1741]

C

Cevik, Abdulkadir NEURAL NETWORK PREDICTION OF THE ULTIMATE CAPACITY OF SHEAR STUD CONNECTORS ON COMPOSITE BEAMS WITH PROFILED STEEL SHEETING [Volume 20, Issue 4, 2013, Pages 1101-1113]
Chackoshian Khorasani, Alireza Biodegradation of heavy fuel oil by newly isolated strain Enterobacter cloacae BBRC10061: study on unstructured kinetic models and innovative equation [Volume 20, Issue 6, 2013, Pages 1929-1938]
Chaib, Messaoud Sol-gel preparation and characterisation of SnO2 powders employed as catalyst for phenol photodegradation [Volume 20, Issue 6, 2013, Pages 1891-1898]
Chang, Ping-Chen Performance indicator for a stochastic-flow manufacturing network with reworking actions based on reliability [Volume 20, Issue 6, 2013, Pages 2201-2214]
Chasib, Khalid Farhod Study the Effect of Adding Co-Solvent (n-Alkoxyethanol) To Sulfolane on the Toluene Extraction [Volume 20, Issue 6, 2013, Pages 1899-1911]
Crine, Michel Sol-gel preparation and characterisation of SnO2 powders employed as catalyst for phenol photodegradation [Volume 20, Issue 6, 2013, Pages 1891-1898]

D

Darvishan, Ehsan Retrofitting I-Beam to Double-I Built-up Column Connections Using Through Plates and T-Stiffeners [Volume 20, Issue 6, 2013, Pages 1695-1707]
Dayhim, N. Experimental Investigation of Square RC Column Strengthened with Near Surface Mounted GFRP Bars Subjected to Axial and Cyclic lateral Loads [Volume 20, Issue 5, 2013, Pages 1361-1371]
Dehghan Khalili, Shiva An efficient method for the catalyst-free one-pot green synthesis of 2,4,5-trisubstituted imidazoles in water [Volume 20, Issue 6, 2013, Pages 1855-1862]
Deng, Jin-gen Characteristics of rock mechanics and PDC bit optimization of glutenite formation in the Pearl River Mouth Basin oilfields [Volume 20, Issue 4, 2013, Pages 1133-1144]
Derakhshani, S.M.E. Study of Nanofluid Natural Convection in an Inclined L-Shaped Cavity [Volume 20, Issue 6, 2013, Pages 2297-2305]
D.Ganji, D. Natural convection in a nanofluid filled concentric annulus between an outer square cylinder and an inner elliptic cylinder [Volume 20, Issue 4, 2013, Pages 1241-1253]
D. Markazi, Amir H. Matched Pole-Zero State-Space Model and Continuous-Time Properties [Volume 20, Issue 4, 2013, Pages 1193-1201]
Dolati, Ardeshir Single-Item Lot-Sizing and Scheduling Problem with Deteriorating Inventory and Multiple Warehouses [Volume 20, Issue 6, 2013, Pages 2177-2187]
Dorrigiv, Morteza Formal Ambiguity-resolving Syntax Definition with Asserted Shift Reduce Sets [Volume 20, Issue 6, 2013, Pages 1939-1952]
Du, Xiang-dong Characteristics of rock mechanics and PDC bit optimization of glutenite formation in the Pearl River Mouth Basin oilfields [Volume 20, Issue 4, 2013, Pages 1133-1144]

E

E. Estekanchi, H. Investigation of Strong-Motion Duration Consistency in Endurance Time Excitation Functions [Volume 20, Issue 4, 2013, Pages 1085-1093]
Eftekhari, S. A. Numerical solution of general boundary layer problems by the method of differential quadrature [Volume 20, Issue 4, 2013, Pages 1278-1301]
Ejtehadi, Omid Detailed Investigation of Hydrodynamics and Thermal Behaviors of Rarefied Shear Driven Flow Using DSMC [Volume 20, Issue 4, 2013, Pages 1228-1240]
Elmi, M. An analytical approach to reliability assessment of shear wave velocity relationship [Volume 20, Issue 6, 2013, Pages 1685-1694]
Entezam, Alireza Mechanical Properties of Steel Fiber-Reinforced Concrete Slab Tracks on Non-ballasted Foundations [Volume 20, Issue 6, 2013, Pages 1626-1636]
Eslami, Abolfazl DETERMINING SOIL SHEAR STRENGTH PARAMETERS FROM CPT AND CPTu DATA [Volume 20, Issue 5, 2013, Pages 1349-1360]
Esmaeili, Saeid Multi-objective Optimal Location of SSSC and STATCOM Achieved by Fuzzy Optimization Strategy and Harmony Search Algorithm [Volume 20, Issue 6, 2013, Pages 2024-2035]
Esmaeili Dahej, Abbas Multi-objective Optimal Location of SSSC and STATCOM Achieved by Fuzzy Optimization Strategy and Harmony Search Algorithm [Volume 20, Issue 6, 2013, Pages 2024-2035]
Etebari, Farhad Network revenue management under specific choice models [Volume 20, Issue 6, 2013, Pages 2161-2176]
Ezabadi, Ali L-Proline as an efficient organocatalyst for the synthesis of quinoxaline derivatives under solvent-free conditions [Volume 20, Issue 6, 2013, Pages 1848-1854]

F

Faez, Rahim Simulation of Carbon Nanotube Field Effect Transistor with Two Different Gate Insulator [Volume 20, Issue 6, 2013, Pages 2332-2340]
Fallah, Mina Simulation of Carbon Nanotube Field Effect Transistor with Two Different Gate Insulator [Volume 20, Issue 6, 2013, Pages 2332-2340]
Faraji Dizaji, F. Lycopodium Dust Flame Characteristics Considering Char Yield [Volume 20, Issue 6, 2013, Pages 1781-1791]
Fardi, M. Nonlinear oscillators with rational terms: A new semi-analytical technique [Volume 20, Issue 4, 2013, Pages 1153-1160]
Faridimehr, Sina Optimal strategies for price, warranty length, and production rate of a new product with learning production cost [Volume 20, Issue 6, 2013, Pages 2247-2258]
Farokh Payam, Amir Sensitivity Analysis of Vibration modes of Rectangular Cantilever Beams Immersed in Fluid to Surface Stiffness Variations [Volume 20, Issue 4, 2013, Pages 1221-1227]
Farrokhinia, Niki L-Proline as an efficient organocatalyst for the synthesis of quinoxaline derivatives under solvent-free conditions [Volume 20, Issue 6, 2013, Pages 1848-1854]
Farshidianfar, Anooshiravan An Efficient Concept for Non-dimensionalizing the Duffing Equations Based on the Parameterized Perturbation Method [Volume 20, Issue 5, 2013, Pages 1455-1463]
Fatemi Ghomi, S.M.T. Three meta-heuristics to solve the no-wait two-stage assembly flow shop scheduling problem [Volume 20, Issue 6, 2013, Pages 2275-2283]
Fattahi, A. Heat and mass transfer by Natural convection around a hot body in a rectangular cavity [Volume 20, Issue 5, 2013, Pages 1474-1484]
Fazlollahtabar, Hamed Adapted Markovian Model to Control Reliability Assessment in Multiple AGV [Volume 20, Issue 6, 2013, Pages 2224-2237]
Fu, ZhongZhi Experimental study on the mechanical properties of clayey soil under different freezing apparatus temperatures and freeze-thaw cycles [Volume 20, Issue 4, 2013, Pages 1145-1152]

G

Ghaemian, M. PULVINO and Peripheral Joint Effects on Static and Seismic Safety of Concrete Arch Dams [Volume 20, Issue 6, 2013, Pages 1579-1594]
Ghaemian, Mohsen Nonlinear Dynamic Analysis of Concrete Gravity Dam Considering Elastoplastic Constitutive Model for Foundation [Volume 20, Issue 6, 2013, Pages 1676-1684]
Ghaheri, Habibeh Extracting Common Spatial Patterns from EEG time segments for classifying Motor Imagery classes in a Brain Computer Interface (BCI) [Volume 20, Issue 6, 2013, Pages 2061-2072]
Ghasemi, E. Control volume finite element modeling of free convection inside an inclined porous enclosure with a sinusoidal hot wall [Volume 20, Issue 5, 2013, Pages 1401-1414]
GhasemiGol, Majid Impact of Stripe Unit Size on Performance and Endurance of SSD-Based RAID Arrays [Volume 20, Issue 6, 2013, Pages 1978-1998]
Ghiasi, Mahmoud Evaluation of the modified 3D free-surface Green’s function for potential flow in a numerical towing tank [Volume 20, Issue 5, 2013, Pages 1538-1549]
Ghodrati Amiri, Gholamreza Retrofitting I-Beam to Double-I Built-up Column Connections Using Through Plates and T-Stiffeners [Volume 20, Issue 6, 2013, Pages 1695-1707]
Ghorbani, Bahram Design of mixed refrigerant cycle for low temperature processes using thermodynamic approach [Volume 20, Issue 4, 2013, Pages 1254-1268]
Ghorbani, Morteza Numerical Investigation on the External Compressible Flow around NACA m1 and NACA 0015 Airfoils [Volume 20, Issue 5, 2013, Pages 1508-1516]
Ghorbanpour Arani, A. Surface stress effects on dynamic stability of double-walled boron nitride nanotubes conveying viscose fluid based on nonlocal shell theory [Volume 20, Issue 6, 2013, Pages 2356-2374]
Goharkhah, M. Analytical Solution for Large amplitude Vibrations of Micro-beams Actuated by an Electro-static Force [Volume 20, Issue 5, 2013, Pages 1499-1507]
GOLFAM, Behnam A new generalized approach for implementing any homogeneous and non-homogeneous boundary conditions in the generalized dierential quadrature analysis of beams [Volume 20, Issue 4, 2013, Pages 1114-1123]
Gorji-Bandpy, M. Natural convection in a nanofluid filled concentric annulus between an outer square cylinder and an inner elliptic cylinder [Volume 20, Issue 4, 2013, Pages 1241-1253]
Goroohi, Ali Multi-objective Optimal Location of SSSC and STATCOM Achieved by Fuzzy Optimization Strategy and Harmony Search Algorithm [Volume 20, Issue 6, 2013, Pages 2024-2035]

H

Habibagahi, G. Prediction of unsaturated soils effective stress parameter using gene expression programming [Volume 20, Issue 5, 2013, Pages 1433-1444]
Habibagahi, G. Prediction of unsaturated soils effective stress parameter using gene expression programming [Volume 20, Issue 5, 2013, Pages 1433-1444]
Haeri, S. Mohsen Evaluation of the Effect of Anisotropic Consolidation and Principle Stress Rotation on Undrained Behavior of Silty Sands [Volume 20, Issue 6, 2013, Pages 1637-1653]
Haghighi, Hassan A Formal Mapping fromObject-Z Specification to C++ Code [Volume 20, Issue 6, 2013, Pages 1953-1977]
Haghparast, Mehran A Reliable Fault Tolerant Attitude Control System Based on an Adaptive Fault Detection and Diagnosis Algorithm together with a Backstepping Fault Recovery Controller [Volume 20, Issue 6, 2013, Pages 1999-2014]
Hajiali, Hadi Effects of Bioglass Nanoparticles on Bioactivity and Mechanical Property of poly(3hydroxybutirate) Scaffolds [Volume 20, Issue 6, 2013, Pages 2306-2313]
Hajialigol, N. Heat and mass transfer by Natural convection around a hot body in a rectangular cavity [Volume 20, Issue 5, 2013, Pages 1474-1484]
Hajilouy-Benisi, Ali Experimental and Numerical Investigation of Radial Flow Compressor Volute Shape effects in Characteristics and Circumferential Pressure Non-uniformity [Volume 20, Issue 6, 2013, Pages 1753-1764]
Haj Najafi, L. Reliability-Based Evaluation of Load Factors using Beta Unzipping and Bayesian Methods [Volume 20, Issue 4, 2013, Pages 1175-1192]
Hariri-Ardebili, M. A. PULVINO and Peripheral Joint Effects on Static and Seismic Safety of Concrete Arch Dams [Volume 20, Issue 6, 2013, Pages 1579-1594]
Hashemian, M. Surface stress effects on dynamic stability of double-walled boron nitride nanotubes conveying viscose fluid based on nonlocal shell theory [Volume 20, Issue 6, 2013, Pages 2356-2374]
Hashtarkhani, Bijan Introducing a new sliding manifold applied for control of uncertain nonlinear brushless DC and permanent magnet synchronous motors [Volume 20, Issue 6, 2013, Pages 2073-2083]
Hassan, Aziz Synthesis and Characterization of Biodegradable Multiblock Copolymers of L-Lactide, e-Caprolactone and Poly(ethylene glycol) [Volume 20, Issue 6, 2013, Pages 1839-1847]
Hassanzadeh, Amir Numerical energy separation analysis on the commercial Ranque-Hilsch vortex tube on basis of application of different gases [Volume 20, Issue 5, 2013, Pages 1528-1537]
Hazrati, A. Safe control of air cushion surge chambers in hydropower systems [Volume 20, Issue 6, 2013, Pages 1605-1611]
Hazrati, Arash Experimental Study on Water-wing characteristics induced by piers in Flood Drainage Culverts [Volume 20, Issue 5, 2013, Pages 1320-1326]
Heinrichs, Benoît Sol-gel preparation and characterisation of SnO2 powders employed as catalyst for phenol photodegradation [Volume 20, Issue 6, 2013, Pages 1891-1898]
Hemati Boroujeni, F. Nonlinear oscillators with rational terms: A new semi-analytical technique [Volume 20, Issue 4, 2013, Pages 1153-1160]
Heydari, R. Heat and mass transfer by Natural convection around a hot body in a rectangular cavity [Volume 20, Issue 5, 2013, Pages 1474-1484]
Hosseinalipour, Mohammad Effects of Bioglass Nanoparticles on Bioactivity and Mechanical Property of poly(3hydroxybutirate) Scaffolds [Volume 20, Issue 6, 2013, Pages 2306-2313]
Hosseini, A. Experimental Investigation of Square RC Column Strengthened with Near Surface Mounted GFRP Bars Subjected to Axial and Cyclic lateral Loads [Volume 20, Issue 5, 2013, Pages 1361-1371]
Hosseini, S.A.A. Some Considerations on Higher Order Approximation of Duffing Equation in the Case of Primary Resonance [Volume 20, Issue 5, 2013, Pages 1464-1473]
Huan, Z. Thermodynamic Analysis of Performance of Vapour Compression Refrigeration System Working with R290 and R600a Mixtures [Volume 20, Issue 6, 2013, Pages 1720-1728]
Huang, Kai-wen Characteristics of rock mechanics and PDC bit optimization of glutenite formation in the Pearl River Mouth Basin oilfields [Volume 20, Issue 4, 2013, Pages 1133-1144]

I

Imanian, A. A Novel Method for Simultaneous Control of Speed and Torque of the Motors of a Cable Suspended Robot for Tracking Procedure [Volume 20, Issue 5, 2013, Pages 1550-1565]

J

Jaberipur, Ghassem Formal Ambiguity-resolving Syntax Definition with Asserted Shift Reduce Sets [Volume 20, Issue 6, 2013, Pages 1939-1952]
Jafari, A. A. Numerical solution of general boundary layer problems by the method of differential quadrature [Volume 20, Issue 4, 2013, Pages 1278-1301]
Jafari, Amir Hossein Simulation of Carbon Nanotube Field Effect Transistor with Two Different Gate Insulator [Volume 20, Issue 6, 2013, Pages 2332-2340]
Jafari, S. A novel low complexity multiuser detector based on modified genetic algorithm in Direct Sequence-Code Division Multiple Access communication systems [Volume 20, Issue 6, 2013, Pages 2015-2023]
Jalali, S.Gholamreza Adapted Markovian Model to Control Reliability Assessment in Multiple AGV [Volume 20, Issue 6, 2013, Pages 2224-2237]
Jalalimanesh, Ammar Network revenue management under specific choice models [Volume 20, Issue 6, 2013, Pages 2161-2176]
Jamali, Abbas Synthesis of 2-amino-4,6-diarylnicotininitriles using 3-propyldiethylenetriamine-silica as a recyclable solid base catalyst [Volume 20, Issue 6, 2013, Pages 1863-1870]
Janalizadeh, Asskar Control volume finite element modeling of free convection inside an inclined porous enclosure with a sinusoidal hot wall [Volume 20, Issue 5, 2013, Pages 1401-1414]
Javadi, A.A. An analytical approach to reliability assessment of shear wave velocity relationship [Volume 20, Issue 6, 2013, Pages 1685-1694]
Jian, Zhang Experimental Study on Water-wing characteristics induced by piers in Flood Drainage Culverts [Volume 20, Issue 5, 2013, Pages 1320-1326]
Jian, Zhang Safe control of air cushion surge chambers in hydropower systems [Volume 20, Issue 6, 2013, Pages 1605-1611]
Jianfeng, An Safe control of air cushion surge chambers in hydropower systems [Volume 20, Issue 6, 2013, Pages 1605-1611]
Johari, A. Prediction of unsaturated soils effective stress parameter using gene expression programming [Volume 20, Issue 5, 2013, Pages 1433-1444]
Johari, A. An analytical approach to reliability assessment of shear wave velocity relationship [Volume 20, Issue 6, 2013, Pages 1685-1694]
Jolai, F. Three meta-heuristics to solve the no-wait two-stage assembly flow shop scheduling problem [Volume 20, Issue 6, 2013, Pages 2275-2283]
Jolai, Fariborz Consideration of transportation lags in Two-machine Flowshop scheduling problem [Volume 20, Issue 6, 2013, Pages 2215-2223]
Juwana, Wibawa Endra Characteristics of zinc oxide nanorods synthesized by low power DC thermal plasma [Volume 20, Issue 6, 2013, Pages 2348-2355]

K

Kabganian, Mansour Three-axis Attitude Control Design For A Spacecraft Based On Lyapunov Stability Criteria [Volume 20, Issue 4, 2013, Pages 1302-1309]
Kamyabi, Ata Effects of viscoelastic polymer solutions on the oil extraction from dead ends [Volume 20, Issue 6, 2013, Pages 1912-1920]
Kamyabi, Mohammad Mahdi Effects of viscoelastic polymer solutions on the oil extraction from dead ends [Volume 20, Issue 6, 2013, Pages 1912-1920]
KAPLAN, Hasan INVESTIGATION OF CARBON AND ACRYLIC FIBRE– ‎REINFORCED MORTARS [Volume 20, Issue 5, 2013, Pages 1395-1400]
Karami, Farzad Stabilization of a Vibrating Non-Classical Micro-Cantilever Using Electrostatic Actuation [Volume 20, Issue 6, 2013, Pages 1824-1831]
Karami, M. Mixed Integer Programming of Security-Constrained Daily Hydrothermal Generation Scheduling(SCDHGS) [Volume 20, Issue 6, 2013, Pages 2036-2050]
Karbasi, Saeed Effects of Bioglass Nanoparticles on Bioactivity and Mechanical Property of poly(3hydroxybutirate) Scaffolds [Volume 20, Issue 6, 2013, Pages 2306-2313]
Kaushik, Brajesh Kumar Novel Spatially Arranged Mixed Carbon Nanotube Bundle Interconnects - Impact on Delay and Power [Volume 20, Issue 6, 2013, Pages 2341-2347]
Kazemzadeh Hannani, Siamak Analysis and modeling of building thermal response to investigate the effect of boundary conditions [Volume 20, Issue 4, 2013, Pages 1269-1277]
Kefayati, GH.R. Lattice Boltzmann simulation of natural convection in a nanofluid-filled inclined square cavity at presence of magnetic field [Volume 20, Issue 5, 2013, Pages 1517-1527]
Keyhani, Reza Evaluation of the Effect of Anisotropic Consolidation and Principle Stress Rotation on Undrained Behavior of Silty Sands [Volume 20, Issue 6, 2013, Pages 1637-1653]
Khan, Y. Nonlinear oscillators with rational terms: A new semi-analytical technique [Volume 20, Issue 4, 2013, Pages 1153-1160]
Khayatzadeh, S. A Novel Method for Simultaneous Control of Speed and Torque of the Motors of a Cable Suspended Robot for Tracking Procedure [Volume 20, Issue 5, 2013, Pages 1550-1565]
Khedmati, Majid Phase II monitoring of binary response profiles [Volume 20, Issue 6, 2013, Pages 2238-2246]
Khorsand Vakilzadeh, Majid Optimal Sliding Mode Control for Atomic Force Microscope Tip Positioning during Nano-Manipulation Process [Volume 20, Issue 6, 2013, Pages 2285-2296]
Kompany, Ahmad Dopant induced changes in physical properties of ZnO:Mg ‎nanosuspensions: study of antibacterial activity [Volume 20, Issue 6, 2013, Pages 2375-2381]
Korani, Ehsan The Hierarchical Hub Covering Problem with Innovative Allocation Procedure by Covering Radiuses [Volume 20, Issue 6, 2013, Pages 2138-2160]
Korayem, M. H. A Novel Method for Simultaneous Control of Speed and Torque of the Motors of a Cable Suspended Robot for Tracking Procedure [Volume 20, Issue 5, 2013, Pages 1550-1565]
Köken, A. NEURAL NETWORK PREDICTION OF THE ULTIMATE CAPACITY OF SHEAR STUD CONNECTORS ON COMPOSITE BEAMS WITH PROFILED STEEL SHEETING [Volume 20, Issue 4, 2013, Pages 1101-1113]
Köroğlu, M. A. NEURAL NETWORK PREDICTION OF THE ULTIMATE CAPACITY OF SHEAR STUD CONNECTORS ON COMPOSITE BEAMS WITH PROFILED STEEL SHEETING [Volume 20, Issue 4, 2013, Pages 1101-1113]

L

Laxhmi, N. Doping assisted structural transition in copper substituted MgFe2O4 ferrite: Thermal, electrical and magnetic properties [Volume 20, Issue 6, 2013, Pages 2323-2331]
Léonard, Angélique Sol-gel preparation and characterisation of SnO2 powders employed as catalyst for phenol photodegradation [Volume 20, Issue 6, 2013, Pages 1891-1898]
Li, Qing-fu Combined Effect of Silica Fume and Polypropylene Fiberon Drying Shrinkage Properties of Concrete Composites Containing Fly Ash [Volume 20, Issue 5, 2013, Pages 1372-1380]
Li, Zhuo Experimental study on the mechanical properties of clayey soil under different freezing apparatus temperatures and freeze-thaw cycles [Volume 20, Issue 4, 2013, Pages 1145-1152]
Lin, Yi-Kuei Performance indicator for a stochastic-flow manufacturing network with reworking actions based on reliability [Volume 20, Issue 6, 2013, Pages 2201-2214]
Liu, SiHong Experimental study on the mechanical properties of clayey soil under different freezing apparatus temperatures and freeze-thaw cycles [Volume 20, Issue 4, 2013, Pages 1145-1152]
LIZAMA, CARLOS SOME OPERATORS ACTING ON WEIGHTED SEQUENCE SPACES AND APPLICATIONS [Volume 20, Issue 6, 2013, Pages 1765-1772]

M

Maddah, M. A Novel Method for Simultaneous Control of Speed and Torque of the Motors of a Cable Suspended Robot for Tracking Procedure [Volume 20, Issue 5, 2013, Pages 1550-1565]
Maddahi ‎, Pari sadat Dopant induced changes in physical properties of ZnO:Mg ‎nanosuspensions: study of antibacterial activity [Volume 20, Issue 6, 2013, Pages 2375-2381]
Madhkhan, Morteza Mechanical Properties of Steel Fiber-Reinforced Concrete Slab Tracks on Non-ballasted Foundations [Volume 20, Issue 6, 2013, Pages 1626-1636]
Mafi, Mostafa Design of mixed refrigerant cycle for low temperature processes using thermodynamic approach [Volume 20, Issue 4, 2013, Pages 1254-1268]
Maghsoudi, A.Z. Study of Nanofluid Natural Convection in an Inclined L-Shaped Cavity [Volume 20, Issue 6, 2013, Pages 2297-2305]
Mahboobi, Seyed Hanif Optimal Sliding Mode Control for Atomic Force Microscope Tip Positioning during Nano-Manipulation Process [Volume 20, Issue 6, 2013, Pages 2285-2296]
Mahlooji, Hashem Phase II monitoring of binary response profiles [Volume 20, Issue 6, 2013, Pages 2238-2246]
Majumder, Manoj Kumar Novel Spatially Arranged Mixed Carbon Nanotube Bundle Interconnects - Impact on Delay and Power [Volume 20, Issue 6, 2013, Pages 2341-2347]
Makiabadi, M.H. An Enhanced Particle Swarm Optimization for Design of Pin Connected Structures [Volume 20, Issue 5, 2013, Pages 1415-1432]
Makiabadi, M.H. A New Accelerated Firefly Algorithm for Size Optimization of Truss Structures [Volume 20, Issue 6, 2013, Pages 1612-1625]
Manhas, Sanjeev Kumar Novel Spatially Arranged Mixed Carbon Nanotube Bundle Interconnects - Impact on Delay and Power [Volume 20, Issue 6, 2013, Pages 2341-2347]
Mansouri, Iman Geometrical and material nonlinear analysis of structures under static and dynamic loading based on quadratic path [Volume 20, Issue 6, 2013, Pages 1595-1604]
Manteghi, S. A Novel Method for Simultaneous Control of Speed and Torque of the Motors of a Cable Suspended Robot for Tracking Procedure [Volume 20, Issue 5, 2013, Pages 1550-1565]
Mashayekhi, M. Investigation of Strong-Motion Duration Consistency in Endurance Time Excitation Functions [Volume 20, Issue 4, 2013, Pages 1085-1093]
Mashreghi, Mansour Biodegradation of heavy fuel oil by newly isolated strain Enterobacter cloacae BBRC10061: study on unstructured kinetic models and innovative equation [Volume 20, Issue 6, 2013, Pages 1929-1938]
Mashreghi, Mansour Dopant induced changes in physical properties of ZnO:Mg ‎nanosuspensions: study of antibacterial activity [Volume 20, Issue 6, 2013, Pages 2375-2381]
Medi, A. Analysis of Parametric Oscillations in High Power Amplifiers [Volume 20, Issue 6, 2013, Pages 2084-2092]
Meghdari, Ali Optimal Sliding Mode Control for Atomic Force Microscope Tip Positioning during Nano-Manipulation Process [Volume 20, Issue 6, 2013, Pages 2285-2296]
Mehdizad, S. Experimental Investigation of Square RC Column Strengthened with Near Surface Mounted GFRP Bars Subjected to Axial and Cyclic lateral Loads [Volume 20, Issue 5, 2013, Pages 1361-1371]
Mehdizadeh, Esmaeil Design of a multi-stage transportation network in a supply chain system: Formulation and efficient solution procedure [Volume 20, Issue 6, 2013, Pages 2188-2200]
Mehrabian, M. A. Heat and mass transfer by Natural convection around a hot body in a rectangular cavity [Volume 20, Issue 5, 2013, Pages 1474-1484]
Ming, Hu Experimental Study on Water-wing characteristics induced by piers in Flood Drainage Culverts [Volume 20, Issue 5, 2013, Pages 1320-1326]
Miremadi, Seyed Iman Gas separation properties of crosslinked and non-crosslinked Carboxymethylcellulose (CMC)membranes [Volume 20, Issue 6, 2013, Pages 1921-1928]
Mirjalili, B.F. Nano silica phosphoric acid: as a suitable catalyst for synthesis of trisubstituted imidazoles via sonication condition [Volume 20, Issue 6, 2013, Pages 1885-1889]
Mirnezhad, M. Stability Analysis of Boron Nitride Nanotubes via a Combined Continuum-Atomistic Model [Volume 20, Issue 6, 2013, Pages 2314-2322]
Mirzabozorg, H. PULVINO and Peripheral Joint Effects on Static and Seismic Safety of Concrete Arch Dams [Volume 20, Issue 6, 2013, Pages 1579-1594]
Mohammadi, E. Analysis of Parametric Oscillations in High Power Amplifiers [Volume 20, Issue 6, 2013, Pages 2084-2092]
Mohammadi-Rovshanndeh, J. Synthesis and Characterization of Biodegradable Multiblock Copolymers of L-Lactide, e-Caprolactone and Poly(ethylene glycol) [Volume 20, Issue 6, 2013, Pages 1839-1847]
Mohammed, Ahmed Y. Simulation of Flow Over The Side Weir Using Simulink [Volume 20, Issue 4, 2013, Pages 1094-1100]
Mohaselafshar, Somayeh Design of a multi-stage transportation network in a supply chain system: Formulation and efficient solution procedure [Volume 20, Issue 6, 2013, Pages 2188-2200]
Mojaddam, Mohammad Experimental and Numerical Investigation of Radial Flow Compressor Volute Shape effects in Characteristics and Circumferential Pressure Non-uniformity [Volume 20, Issue 6, 2013, Pages 1753-1764]
Monajemi, Parjang Investigating pore network models as numerical tools to solve steady saturated groundwater flow [Volume 20, Issue 6, 2013, Pages 1662-1675]
Moradi, Hamed Multivariable control of an industrial boiler-turbine unit with nonlinear model: A comparison between gain scheduling & feedback linearization approaches [Volume 20, Issue 5, 2013, Pages 1485-1498]
Mostafavi, S. A. Lycopodium Dust Flame Characteristics Considering Char Yield [Volume 20, Issue 6, 2013, Pages 1781-1791]
Motaghedi, Hossein DETERMINING SOIL SHEAR STRENGTH PARAMETERS FROM CPT AND CPTu DATA [Volume 20, Issue 5, 2013, Pages 1349-1360]
Mousavi, S.M. A new method based on multi-segment decision matrix for solving decision-making problems [Volume 20, Issue 6, 2013, Pages 2348-2355]
Mousavi Naynian, Seyed Mojtaba Design of mixed refrigerant cycle for low temperature processes using thermodynamic approach [Volume 20, Issue 4, 2013, Pages 1254-1268]
Movahhedy, Mohammad Reza Experimental and Numerical Investigation of Radial Flow Compressor Volute Shape effects in Characteristics and Circumferential Pressure Non-uniformity [Volume 20, Issue 6, 2013, Pages 1753-1764]
Mozdgir, A. Three meta-heuristics to solve the no-wait two-stage assembly flow shop scheduling problem [Volume 20, Issue 6, 2013, Pages 2275-2283]
Mukul, Sharif Ahmed Biosorption of As(III) from aqueous solution by Acacia auriculiformisleaves [Volume 20, Issue 6, 2013, Pages 1871-1880]
MUTLU, Ali The Comparison and Successive Iteration of Approximate Solution of Ordinary Differential Equation with Initial Condition by New Modified Krasnoselskii Iteration Method [Volume 20, Issue 6, 2013, Pages 1792-1804]

N

Nabavi, A. A new on-chip sensor design for NBTI using slew rate monitoring [Volume 20, Issue 6, 2013, Pages 2093-2098]
Nadafi, Reza Three-axis Attitude Control Design For A Spacecraft Based On Lyapunov Stability Criteria [Volume 20, Issue 4, 2013, Pages 1302-1309]
Najafi, Mehrnaz A Formal Mapping fromObject-Z Specification to C++ Code [Volume 20, Issue 6, 2013, Pages 1953-1977]
Nakhaee, M. Prediction of unsaturated soils effective stress parameter using gene expression programming [Volume 20, Issue 5, 2013, Pages 1433-1444]
Namgyal, Tsering Doping assisted structural transition in copper substituted MgFe2O4 ferrite: Thermal, electrical and magnetic properties [Volume 20, Issue 6, 2013, Pages 2323-2331]
Naraghi, Mahyar Optimal distribution ofbraking and steering tire forces subject to stabilityconstraints [Volume 20, Issue 6, 2013, Pages 1709-1719]
Navaei, J. Three meta-heuristics to solve the no-wait two-stage assembly flow shop scheduling problem [Volume 20, Issue 6, 2013, Pages 2275-2283]
Nazemian, S. Nano silica phosphoric acid: as a suitable catalyst for synthesis of trisubstituted imidazoles via sonication condition [Volume 20, Issue 6, 2013, Pages 1885-1889]
Niaki, S.T.A. Optimal strategies for price, warranty length, and production rate of a new product with learning production cost [Volume 20, Issue 6, 2013, Pages 2247-2258]
Nicknam, A. Experimental Investigation of Square RC Column Strengthened with Near Surface Mounted GFRP Bars Subjected to Axial and Cyclic lateral Loads [Volume 20, Issue 5, 2013, Pages 1361-1371]
Nikandish, G. Analysis of Parametric Oscillations in High Power Amplifiers [Volume 20, Issue 6, 2013, Pages 2084-2092]
Niknam, Khodabakhsh Synthesis of 2-amino-4,6-diarylnicotininitriles using 3-propyldiethylenetriamine-silica as a recyclable solid base catalyst [Volume 20, Issue 6, 2013, Pages 1863-1870]
Niroumand, A.H. Study of Nanofluid Natural Convection in an Inclined L-Shaped Cavity [Volume 20, Issue 6, 2013, Pages 2297-2305]

O

Omidvar, Pourya Finite Volume - Lattice Boltzmann Modeling of Time Dependent Flows [Volume 20, Issue 6, 2013, Pages 1812-1823]
Opan, M. Relationships of yield-capacity-risk in a multiple reservoir system: The Munzur River Basin in Turkey [Volume 20, Issue 5, 2013, Pages 1311-1319]
Ossia, S.A. Finite element simulation of warm deep drawing process in forming circular cup from magnesium alloy sheet [Volume 20, Issue 4, 2013, Pages 1213-1220]
OZKOK, Murat EFFECTS OF WELDING OPERATING FACTOR ON SHIPYARD PANEL LINE’S PRODUCTION QUANTITY [Volume 20, Issue 6, 2013, Pages 1773-1780]

P

Parvez, Md. Khaled Biosorption of As(III) from aqueous solution by Acacia auriculiformisleaves [Volume 20, Issue 6, 2013, Pages 1871-1880]
Pashaei, Mahdi TunnedTTStochastic Directional Search: an Efficient Heuristic for Structural Optimization of Building Frames [Volume 20, Issue 4, 2013, Pages 1124-1132]
Pirard, Jean-Paul Sol-gel preparation and characterisation of SnO2 powders employed as catalyst for phenol photodegradation [Volume 20, Issue 6, 2013, Pages 1891-1898]
Poelman, Dirk Sol-gel preparation and characterisation of SnO2 powders employed as catalyst for phenol photodegradation [Volume 20, Issue 6, 2013, Pages 1891-1898]
Poolaei Moziraji, Zahra Analysis and modeling of building thermal response to investigate the effect of boundary conditions [Volume 20, Issue 4, 2013, Pages 1269-1277]
Poostforush, Mohammad Biosorption of As(III) from aqueous solution by Acacia auriculiformisleaves [Volume 20, Issue 6, 2013, Pages 1871-1880]
Pourmahmood Aghababa, Mohammad Introducing a new sliding manifold applied for control of uncertain nonlinear brushless DC and permanent magnet synchronous motors [Volume 20, Issue 6, 2013, Pages 2073-2083]
Pourmahmoud, Nader Numerical energy separation analysis on the commercial Ranque-Hilsch vortex tube on basis of application of different gases [Volume 20, Issue 5, 2013, Pages 1528-1537]
Prabandono, Bayu Characteristics of zinc oxide nanorods synthesized by low power DC thermal plasma [Volume 20, Issue 6, 2013, Pages 2348-2355]
Purwanto, Agus Characteristics of zinc oxide nanorods synthesized by low power DC thermal plasma [Volume 20, Issue 6, 2013, Pages 2348-2355]

R

Raei, S. An analytical approach to reliability assessment of shear wave velocity relationship [Volume 20, Issue 6, 2013, Pages 1685-1694]
Rafiee, Seyed Ehsan Numerical energy separation analysis on the commercial Ranque-Hilsch vortex tube on basis of application of different gases [Volume 20, Issue 5, 2013, Pages 1528-1537]
Rahimi, Masoud Numerical energy separation analysis on the commercial Ranque-Hilsch vortex tube on basis of application of different gases [Volume 20, Issue 5, 2013, Pages 1528-1537]
Rahnema, H. A New Accelerated Firefly Algorithm for Size Optimization of Truss Structures [Volume 20, Issue 6, 2013, Pages 1612-1625]
Rajaei Salmasi, Farzaneh Impact of Stripe Unit Size on Performance and Endurance of SSD-Based RAID Arrays [Volume 20, Issue 6, 2013, Pages 1978-1998]
Rajati, M.R. A novel low complexity multiuser detector based on modified genetic algorithm in Direct Sequence-Code Division Multiple Access communication systems [Volume 20, Issue 6, 2013, Pages 2015-2023]
Rakhshandehroo, Gholamreza Investigating pore network models as numerical tools to solve steady saturated groundwater flow [Volume 20, Issue 6, 2013, Pages 1662-1675]
Ramazani S.A., Ahmad Effects of viscoelastic polymer solutions on the oil extraction from dead ends [Volume 20, Issue 6, 2013, Pages 1912-1920]
Rashidian, Reza Synthesis of 2-amino-4,6-diarylnicotininitriles using 3-propyldiethylenetriamine-silica as a recyclable solid base catalyst [Volume 20, Issue 6, 2013, Pages 1863-1870]
Rezaie, Hamid Reza Effects of Bioglass Nanoparticles on Bioactivity and Mechanical Property of poly(3hydroxybutirate) Scaffolds [Volume 20, Issue 6, 2013, Pages 2306-2313]
REZAIE, Freydoon A new generalized approach for implementing any homogeneous and non-homogeneous boundary conditions in the generalized dierential quadrature analysis of beams [Volume 20, Issue 4, 2013, Pages 1114-1123]
Roohi, Ehsan Detailed Investigation of Hydrodynamics and Thermal Behaviors of Rarefied Shear Driven Flow Using DSMC [Volume 20, Issue 4, 2013, Pages 1228-1240]
Rouhi, H. Stability Analysis of Boron Nitride Nanotubes via a Combined Continuum-Atomistic Model [Volume 20, Issue 6, 2013, Pages 2314-2322]
R. Rofooei, Fayaz Comparison of the Drift Spectra Generated Using Continuous and Lumped-Mass Beam Models [Volume 20, Issue 5, 2013, Pages 1337-1348]

S

Sadaghiani, A. K. Spiral heat exchanger optimization using genetic algorithm [Volume 20, Issue 5, 2013, Pages 1445-1454]
Safari, Javad An efficient method for the catalyst-free one-pot green synthesis of 2,4,5-trisubstituted imidazoles in water [Volume 20, Issue 6, 2013, Pages 1855-1862]
Saffar-Avval, Majid Multivariable control of an industrial boiler-turbine unit with nonlinear model: A comparison between gain scheduling & feedback linearization approaches [Volume 20, Issue 5, 2013, Pages 1485-1498]
Saffari, H. Exergy Analysis of the Triple Effect Parallel Flow Water-Lithium Bromide Absorption Chiller with Three Condensers [Volume 20, Issue 4, 2013, Pages 1202-1212]
Saffari, Hamed Geometrical and material nonlinear analysis of structures under static and dynamic loading based on quadratic path [Volume 20, Issue 6, 2013, Pages 1595-1604]
Sahraeian, Rashed The Hierarchical Hub Covering Problem with Innovative Allocation Procedure by Covering Radiuses [Volume 20, Issue 6, 2013, Pages 2138-2160]
Saidi, Mohammad R. A Simple Approach to the Synthesis of 3-Substituted Rhodanines and Thiazolidine-2,4-diones [Volume 20, Issue 6, 2013, Pages 1833-1838]
Salarieh, Hassan Kinematic Control of a New Hyper-Redundant Manipulator with Lockable Joints [Volume 20, Issue 6, 2013, Pages 1742-1752]
Salarieh, Hassan Stabilization of a Vibrating Non-Classical Micro-Cantilever Using Electrostatic Actuation [Volume 20, Issue 6, 2013, Pages 1824-1831]
Salimi, M. A new method based on multi-segment decision matrix for solving decision-making problems [Volume 20, Issue 6, 2013, Pages 2348-2355]
Salmon, Thierry Sol-gel preparation and characterisation of SnO2 powders employed as catalyst for phenol photodegradation [Volume 20, Issue 6, 2013, Pages 1891-1898]
Sedigh, Saeed Exergy Analysis of the Triple Effect Parallel Flow Water-Lithium Bromide Absorption Chiller with Three Condensers [Volume 20, Issue 4, 2013, Pages 1202-1212]
Seifi, Mohammad Dimerization ofIsoquinolinium Ylide and 1,3-Dipolar Cycloaddition with Isoquinoline: Synthesis of Nitrogen-Containing Heterocyclic Compounds [Volume 20, Issue 6, 2013, Pages 1881-1884]
Shafiabadi, Navid Gas separation properties of crosslinked and non-crosslinked Carboxymethylcellulose (CMC)membranes [Volume 20, Issue 6, 2013, Pages 1921-1928]
Shahrokhabadi, Sh. Method of Fundamental Solution (MFS) coupled with particle swarm optimization (PSO) to determine optimal phreatic line in unconfined seepage problem [Volume 20, Issue 5, 2013, Pages 1327-1336]
Shahrouzi, Mohsen TunnedTTStochastic Directional Search: an Efficient Heuristic for Structural Optimization of Building Frames [Volume 20, Issue 4, 2013, Pages 1124-1132]
Shahtamasebi, Nasser Dopant induced changes in physical properties of ZnO:Mg ‎nanosuspensions: study of antibacterial activity [Volume 20, Issue 6, 2013, Pages 2375-2381]
Shavandi, Hassan Analyzing the Price Skimming Strategy for New Product Pricing [Volume 20, Issue 6, 2013, Pages 2099-2108]
Shayanfar, H. A. Mixed Integer Programming of Security-Constrained Daily Hydrothermal Generation Scheduling(SCDHGS) [Volume 20, Issue 6, 2013, Pages 2036-2050]
Sheibani, Hassan Dimerization ofIsoquinolinium Ylide and 1,3-Dipolar Cycloaddition with Isoquinoline: Synthesis of Nitrogen-Containing Heterocyclic Compounds [Volume 20, Issue 6, 2013, Pages 1881-1884]
Sheikholeslami, M. Natural convection in a nanofluid filled concentric annulus between an outer square cylinder and an inner elliptic cylinder [Volume 20, Issue 4, 2013, Pages 1241-1253]
Sheikhzadeh, G. A. Heat and mass transfer by Natural convection around a hot body in a rectangular cavity [Volume 20, Issue 5, 2013, Pages 1474-1484]
Shekofteh, Yasser Remote Diagnosis of Unilateral Vocal Fold Paralysis Using Matching Pursuit based Features Extracted from Telephony Speech Signal [Volume 20, Issue 6, 2013, Pages 2051-2060]
Sheng, Chen Experimental Study on Water-wing characteristics induced by piers in Flood Drainage Culverts [Volume 20, Issue 5, 2013, Pages 1320-1326]
Shodja, Amir H. Comparison of the Drift Spectra Generated Using Continuous and Lumped-Mass Beam Models [Volume 20, Issue 5, 2013, Pages 1337-1348]
Shokri, Alireza A Simple Approach to the Synthesis of 3-Substituted Rhodanines and Thiazolidine-2,4-diones [Volume 20, Issue 6, 2013, Pages 1833-1838]
Singhal, Sonal Doping assisted structural transition in copper substituted MgFe2O4 ferrite: Thermal, electrical and magnetic properties [Volume 20, Issue 6, 2013, Pages 2323-2331]
Soleimani kutanaei, Saman Control volume finite element modeling of free convection inside an inclined porous enclosure with a sinusoidal hot wall [Volume 20, Issue 5, 2013, Pages 1401-1414]
Soleimani kutanaei, Saman Control volume finite element modeling of free convection inside an inclined porous enclosure with a sinusoidal hot wall [Volume 20, Issue 5, 2013, Pages 1401-1414]
Soleymanian, Mir Emad Phase II monitoring of binary response profiles [Volume 20, Issue 6, 2013, Pages 2238-2246]
Soltani, B. Finite element simulation of warm deep drawing process in forming circular cup from magnesium alloy sheet [Volume 20, Issue 4, 2013, Pages 1213-1220]
Soto, Mariantonieta Gutierrez PLACEMENT OF CONTROL DEVICES FOR PASSIVE, SEMI-ACTIVE, AND ‎ACTIVE VIBRATION CONTROL OF STRUCTURES [Volume 20, Issue 6, 2013, Pages 1567-1578]
Subhan, Md. Abdus Biosorption of As(III) from aqueous solution by Acacia auriculiformisleaves [Volume 20, Issue 6, 2013, Pages 1871-1880]
Suyitno, . Characteristics of zinc oxide nanorods synthesized by low power DC thermal plasma [Volume 20, Issue 6, 2013, Pages 2348-2355]

T

Tabatabaee, Nader Rheological master curves for modified asphalt binders [Volume 20, Issue 6, 2013, Pages 1654-1661]
Taherifar, Ali Kinematic Control of a New Hyper-Redundant Manipulator with Lockable Joints [Volume 20, Issue 6, 2013, Pages 1742-1752]
Tajik, A. A Novel Method for Simultaneous Control of Speed and Torque of the Motors of a Cable Suspended Robot for Tracking Procedure [Volume 20, Issue 5, 2013, Pages 1550-1565]
Tasseroul, Ludivine Sol-gel preparation and characterisation of SnO2 powders employed as catalyst for phenol photodegradation [Volume 20, Issue 6, 2013, Pages 1891-1898]
Tavakkoli-Moghaddam, R. A new method based on multi-segment decision matrix for solving decision-making problems [Volume 20, Issue 6, 2013, Pages 2348-2355]
Tavasoli, Ali Optimal distribution ofbraking and steering tire forces subject to stabilityconstraints [Volume 20, Issue 6, 2013, Pages 1709-1719]
Tehranizadeh, M. Reliability-Based Evaluation of Load Factors using Beta Unzipping and Bayesian Methods [Volume 20, Issue 4, 2013, Pages 1175-1192]
Terzi, Özlem Estimating Daily Pan Evaporation Using Data Mining Process [Volume 20, Issue 4, 2013, Pages 1077-1084]
Torki, Mohammad Ebrahim Mechanical Properties of Steel Fiber-Reinforced Concrete Slab Tracks on Non-ballasted Foundations [Volume 20, Issue 6, 2013, Pages 1626-1636]
Tourajizadeh, H. A Novel Method for Simultaneous Control of Speed and Torque of the Motors of a Cable Suspended Robot for Tracking Procedure [Volume 20, Issue 5, 2013, Pages 1550-1565]

U

Ubaidillah, . Characteristics of zinc oxide nanorods synthesized by low power DC thermal plasma [Volume 20, Issue 6, 2013, Pages 2348-2355]
U.BAYRAK, Osman INVESTIGATION OF CARBON AND ACRYLIC FIBRE– ‎REINFORCED MORTARS [Volume 20, Issue 5, 2013, Pages 1395-1400]

V

Vahdani, B. A new method based on multi-segment decision matrix for solving decision-making problems [Volume 20, Issue 6, 2013, Pages 2348-2355]
Vahdani, Mahmood Single-Item Lot-Sizing and Scheduling Problem with Deteriorating Inventory and Multiple Warehouses [Volume 20, Issue 6, 2013, Pages 2177-2187]
Vahdat Azad, A. Spiral heat exchanger optimization using genetic algorithm [Volume 20, Issue 5, 2013, Pages 1445-1454]
Vatankhah, Ramin Stabilization of a Vibrating Non-Classical Micro-Cantilever Using Electrostatic Actuation [Volume 20, Issue 6, 2013, Pages 1824-1831]
Veiskarami, Mehdi Updated Lagrangian Large Deformation Analysis of Consolidation Settlement with Finite Element Method for a Case Study in Iran [Volume 20, Issue 4, 2013, Pages 1161-1174]

W

Wang, LiuJiang Experimental study on the mechanical properties of clayey soil under different freezing apparatus temperatures and freeze-thaw cycles [Volume 20, Issue 4, 2013, Pages 1145-1152]
WEI, Kuangmin Study of Rotational Kinematic Hardening Model: A General Plasticity Formula and Model Implement [Volume 20, Issue 5, 2013, Pages 1381-1394]

Y

Yadollahi, B. Multidimensional Modeling of CNG Direct Injection and Mixture Preparation in a SI Engine Cylinder [Volume 20, Issue 6, 2013, Pages 1729-1741]
Yaghmaei, Soheyla Biodegradation of heavy fuel oil by newly isolated strain Enterobacter cloacae BBRC10061: study on unstructured kinetic models and innovative equation [Volume 20, Issue 6, 2013, Pages 1929-1938]
Yousefi, A. Analysis of Parametric Oscillations in High Power Amplifiers [Volume 20, Issue 6, 2013, Pages 2084-2092]
Yousefi, Ali Akbar Synthesis of Novel Carbon Nanostructures through Solvothermal Route [Volume 20, Issue 6, 2013, Pages 2382-2385]
Yu, Dejian Intuitionistic fuzzy Choquet aggregation operator based on Einstein operation laws [Volume 20, Issue 6, 2013, Pages 2109-2122]

Z

Zahedi, A. A novel low complexity multiuser detector based on modified genetic algorithm in Direct Sequence-Code Division Multiple Access communication systems [Volume 20, Issue 6, 2013, Pages 2015-2023]
Zarabadi-Poor, Pezhman Synthesis of Novel Carbon Nanostructures through Solvothermal Route [Volume 20, Issue 6, 2013, Pages 2382-2385]
Zare, Ata G. Analyzing the Price Skimming Strategy for New Product Pricing [Volume 20, Issue 6, 2013, Pages 2099-2108]
Zarghami, Ahad Finite Volume - Lattice Boltzmann Modeling of Time Dependent Flows [Volume 20, Issue 6, 2013, Pages 1812-1823]
Zeighami, Vahid Development of a Method Based on Particle Swarm Optimization to Solve Resource Constrained Project Scheduling Problem [Volume 20, Issue 6, 2013, Pages 2123-2137]
Zhang, Chao Characteristics of rock mechanics and PDC bit optimization of glutenite formation in the Pearl River Mouth Basin oilfields [Volume 20, Issue 4, 2013, Pages 1133-1144]
Zhang, Chao Characteristics of rock mechanics and PDC bit optimization of glutenite formation in the Pearl River Mouth Basin oilfields [Volume 20, Issue 4, 2013, Pages 1133-1144]
Zhang, Peng Combined Effect of Silica Fume and Polypropylene Fiberon Drying Shrinkage Properties of Concrete Composites Containing Fly Ash [Volume 20, Issue 5, 2013, Pages 1372-1380]
Zhao, Jing-ying Characteristics of rock mechanics and PDC bit optimization of glutenite formation in the Pearl River Mouth Basin oilfields [Volume 20, Issue 4, 2013, Pages 1133-1144]
Zhu, Hai-yan Characteristics of rock mechanics and PDC bit optimization of glutenite formation in the Pearl River Mouth Basin oilfields [Volume 20, Issue 4, 2013, Pages 1133-1144]
ZHU, Sheng Study of Rotational Kinematic Hardening Model: A General Plasticity Formula and Model Implement [Volume 20, Issue 5, 2013, Pages 1381-1394]
Ziarati, Koorush Development of a Method Based on Particle Swarm Optimization to Solve Resource Constrained Project Scheduling Problem [Volume 20, Issue 6, 2013, Pages 2123-2137]