Author Index

A

  • Abad, F. An analytical state-space solution for free vibration of sandwich piezoelectric plate with functionally graded core [Volume 29, Issue 2, 2022, Pages 502-533]
  • Abapour, M. Security constrained optimal power flow in a power system based on energy storage system with high wind penetration [Volume 29, Issue 3, 2022, Pages 1475-1485]
  • Abbasi Harofteh, S. A novel risk assessment approach using Monte Carlo simulation based on co-occurrence of risk factors: A case study of a petrochemical plant construction [Volume 29, Issue 3, 2022, Pages 1755-1765]
  • Abdollahi, A. An application of energy efficiency programs to multi-stage transmission network expansion and reactive power planning [Volume 29, Issue 3, 2022, Pages 1547-1561]
  • Abedi, M. Simultaneous spectrofluorometric analysis of caffeic and ellagic acids through inclusion complex formation with γ-Cyclodextrin [Volume 29, Issue 3, 2022, Pages 1308-1318]
  • Adeniyi, A. G. Evaluating the nature of captured exhaust soot from a retort heating carbonization system [Volume 29, Issue 3, 2022, Pages 1427-1435]
  • Afsari, S. A. Optimal design and analysis of a novel reluctance axial flux magnetic gear [Volume 29, Issue 3, 2022, Pages 1573-1580]
  • Afzalsoltani, S. Effectiveness of a vertical micropile system in mitigating the liquefaction-induced lateral spreading effects on pile foundations: 1 g large-scale shake table tests [Volume 29, Issue 3, 2022, Pages 1038-1058]
  • Aghaei, J. Expansion planning of automated sub-transmission and distribution networks integrated by distributed generations [Volume 29, Issue 2, 2022, Pages 645-659]
  • Aghaie, A. Urban transportation network reliability calculation considering correlation among the links comprising a route [Volume 29, Issue 3, 2022, Pages 1742-1754]
  • Aghamohamadi-Bosjin, S. A hybrid metaheuristic algorithm for data driven leagile sustainable closed-loop supply chain modeling under disruption risk [Volume 29, Issue 3, 2022, Pages 1685-1704]
  • Aghelizadeh, P. Failure analysis of the 16-story Plasco building under fire condition [Volume 29, Issue 3, 2022, Pages 1107-1124]
  • Ahmad, T. A new nonparametric composite exponentially weighted moving average sign control chart [Volume 29, Issue 1, 2022, Pages 290-302]
  • Ahmadi, B. A generalized differential quadrature-based computational model for describing free vibrations behavior of functionally graded circular plates around buckled configuration [Volume 29, Issue 3, 2022, Pages 1250-1264]
  • Akhbari, M. Integration of multi-mode resource-constrained project scheduling under bonus-penalty policies with material ordering under quantity discount scheme for minimizing project cost [Volume 29, Issue 1, 2022, Pages 427-446]
  • Akhter, R. Magneto-hydrodynamic mixed convective heat transfer in a nanofluid filled wavy conduit having rotating cylinders [Volume 29, Issue 2, 2022, Pages 486-501]
  • Akkus, H. Experimental and statistical investigations of surface roughness, vibration, and energy consumption values of titanium alloy during machining using response surface method and grey relational analysis [Volume 29, Issue 1, 2022, Pages 109-119]
  • Akram, K. B. Computational exploration of charge transfer dynamics in dye sensitized SnO2 and ZnS for photocatalytic applications [Volume 29, Issue 3, 2022, Pages 1330-1337]
  • Alaei, S. Cooperative advertising with two local advertising options in a retailer duopoly [Volume 29, Issue 1, 2022, Pages 412-426]
  • Alaghband, Marie An optimization model for scheduling freight trains on a single-rail track [Volume 29, Issue 2, 2022, Pages 853-863]
  • Alemi-Rostami, Mehdi Design and optimization of a large-scale permanent magnet synchronous generator [Volume 29, Issue 1, 2022, Pages 217-229]
  • Ali, Z. Complex q-rung orthopair fuzzy variation coefficient similarity measures and their approach to medical diagnosis and pattern recognition [Volume 29, Issue 2, 2022, Pages 894-914]
  • Ali Khan, M. Effect of humic acid on adsorption of methylparaben from aqueous solutions onto commercially available granular activated carbons [Volume 29, Issue 3, 2022, Pages 1364-1376]
  • Alim, M. A. Magneto-hydrodynamic mixed convective heat transfer in a nanofluid filled wavy conduit having rotating cylinders [Volume 29, Issue 2, 2022, Pages 486-501]
  • Alipour-Sarabi, R. Design and optimization of a large-scale permanent magnet synchronous generator [Volume 29, Issue 1, 2022, Pages 217-229]
  • Alizadeh, M. A quasi-3D modified strain gradient formulation for static bending of functionally graded micro beams resting on Winkler-Pasternak elastic foundation [Volume 29, Issue 1, 2022, Pages 26-40]
  • Amani, V. Study of UV-Vis absorption spectra of magnetic molecule tripyridinium bis[tetrabromidoferrate(III)] bromide with density functional formalisms [Volume 29, Issue 3, 2022, Pages 1319-1329]
  • Aminifar, F. Electricity market assessment in wind energy integrated power systems with the potential of flexibility: A boundary condition approach [Volume 29, Issue 2, 2022, Pages 727-738]
  • Amiri, A. Monitoring attributed social networks based on count data and random effects [Volume 29, Issue 3, 2022, Pages 1581-1591]
  • Anas, M. M. Quantile regression-ratio-type estimators for mean estimation under complete and partial auxiliary information [Volume 29, Issue 3, 2022, Pages 1705-1715]
  • Aram, A. An assessment of data mining and bivariate statistical methods for landslide susceptibility mapping [Volume 29, Issue 3, 2022, Pages 1077-1094]
  • Ardeshir, A. Using association rules to investigate causality patterns of safety-related incidents in the construction industry [Volume 29, Issue 2, 2022, Pages 929-939]
  • Arman, H. Fuzzy mathematical models for maximizing satisfaction of contractors and clients by considering flexible start date of the project [Volume 29, Issue 3, 2022, Pages 1729-1741]
  • Arslan, S. Polygonal tubular linear permanent magnet generator analysis and experimental test [Volume 29, Issue 1, 2022, Pages 168-182]
  • Asgari, Sh. A dual-stator machine with diametrically magnetized PM: Analytical air-gap flux calculation, efficiency optimization, and comparison with conventional dual-stator machines [Volume 29, Issue 1, 2022, Pages 208-216]
  • Ashjaee, M. Tuning the implementable structures of fractional-order PID controllers for control of FOPDT processes [Volume 29, Issue 2, 2022, Pages 660-675]
  • Aslam, M. A new nonparametric composite exponentially weighted moving average sign control chart [Volume 29, Issue 1, 2022, Pages 290-302]
  • Azad Farsani, E. An incentive-based policy on minimization of GHG emissions and loss using adaptive group search multi-objective optimization algorithm [Volume 29, Issue 1, 2022, Pages 230-246]
  • Azadi Moghaddam, M. Comparative modeling of abrasive waterjet machining process based on OA-Taguchi and D-optimal approach and optimization using simulated annealing algorithm [Volume 29, Issue 3, 2022, Pages 1276-1287]

B

  • Babakhani, B. Simulation of the force-displacement behavior of reinforced concrete beams under different degrees and locations of corrosion [Volume 29, Issue 3, 2022, Pages 964-972]
  • Babuei, S. Roll restoring coefficients of planing boats' maneuver using 2D + t approach [Volume 29, Issue 3, 2022, Pages 1197-1209]
  • Bagheri, A. A new approach to the setting of directional overcurrent relays by incorporating cascading outages [Volume 29, Issue 3, 2022, Pages 1562-1572]
  • Bagherzade, Gh. Copper (II) supported on a post-modified Magnetic pectin Fe3O4@Pectin~Imidazole~SO3H-Cu(II): An efficient biopolymer-based catalyst for selective oxidation of alcohols with aqueous TBHP [Volume 29, Issue 3, 2022, Pages 1338-1350]
  • Baheddini, M. Alkali activated cedar wood as an efficient adsorbent for Pb2+ removal from aqueous solutions: Optimization, kinetic and thermodynamic study [Volume 29, Issue 3, 2022, Pages 1351-1363]
  • Bahrami Samani, E. Monitoring attributed social networks based on count data and random effects [Volume 29, Issue 3, 2022, Pages 1581-1591]
  • Bamoniri, A. An efficient synthesis of pyrimido[4,5-b]quinoline and indenopyrido[2,3-d]pyrimidine derivatives in the presence of Fe3O4@nano-cellulose/Sb (V) as a bio-based magnetic nano-catalyst [Volume 29, Issue 3, 2022, Pages 1301-1307]
  • Baniasadi, F. Study of UV-Vis absorption spectra of magnetic molecule tripyridinium bis[tetrabromidoferrate(III)] bromide with density functional formalisms [Volume 29, Issue 3, 2022, Pages 1319-1329]
  • Banki, M. T. Using association rules to investigate causality patterns of safety-related incidents in the construction industry [Volume 29, Issue 2, 2022, Pages 929-939]
  • Bansal, S. Ground Vehicle and UAV Collaborative Routing and Scheduling for Humanitarian logistics using Random Walk Based Ant Colony Optimization [Volume 29, Issue 2, 2022, Pages 632-644]
  • Barahimi, A. H. Urban transportation network reliability calculation considering correlation among the links comprising a route [Volume 29, Issue 3, 2022, Pages 1742-1754]
  • Behnamfar, F. An equation for estimating the maximum normal strain of buried steel pipes in bend area under propagating waves in sands [Volume 29, Issue 3, 2022, Pages 973-989]
  • Bhattacharjee, K. A comparative study of economic load dispatch with complex non-linear constraints using salp swarm algorithm [Volume 29, Issue 2, 2022, Pages 676-692]
  • Bhattacharya, A. Optimal scheduling of hydrothermal system considering variable nature of water transportation delay [Volume 29, Issue 2, 2022, Pages 749-770]
  • Bhatti, S. H. A new nonparametric composite exponentially weighted moving average sign control chart [Volume 29, Issue 1, 2022, Pages 290-302]
  • Boran, S. Determining optimal machine part replacement time using a hybrid ANN- GA model [Volume 29, Issue 2, 2022, Pages 721-782]
  • Borjali, A. Effect of insertion process on biceps tendon reconstruction in BASHTI technique: An in-vitro study [Volume 29, Issue 3, 2022, Pages 1265-1275]
  • B. Rahimi, A. Convective heat transfer and flow phenomena from a rotating sphere in porous media [Volume 29, Issue 2, 2022, Pages 588-596]
  • Bureerat, S. Angle design of stator-rotor blades for VLH axial flow turbine using surrogate-based optimization [Volume 29, Issue 1, 2022, Pages 13-25]

C

  • Cakici, Z. Design of an efficient vehicle-actuated signal control logic for signalized intersections [Volume 29, Issue 3, 2022, Pages 1059-1076]
  • Cardenas-Barron, L. E. Manufacturer-retailer integrated inventory model with controllable lead time and service level constraint under the effect of learning-forgetting in setup cost [Volume 29, Issue 2, 2022, Pages 800-815]
  • Chakraborty, S. Application of grey correlation-based EDAS method for parametric optimization of non-traditional machining processes [Volume 29, Issue 2, 2022, Pages 864-882]
  • Chizari, M. Effect of insertion process on biceps tendon reconstruction in BASHTI technique: An in-vitro study [Volume 29, Issue 3, 2022, Pages 1265-1275]

D

  • Dai, Z. Optimizing two multi-echelon inventory systems for perishable products with price and stock dependent demand in supply chain [Volume 29, Issue 1, 2022, Pages 320-342]
  • Dalalian, M. R. An assessment of data mining and bivariate statistical methods for landslide susceptibility mapping [Volume 29, Issue 3, 2022, Pages 1077-1094]
  • Danaei, Mohsen Robust optimization approach for pricing and shelf space decisions with uncertain demand [Volume 29, Issue 1, 2022, Pages 303-319]
  • Darbandi, S. An assessment of data mining and bivariate statistical methods for landslide susceptibility mapping [Volume 29, Issue 3, 2022, Pages 1077-1094]
  • Das, A. An optimal radiation pattern synthesis and correction of mutually coupled circular dipole antenna array [Volume 29, Issue 3, 2022, Pages 1455-1474]
  • Das, D. Optimal scheduling of hydrothermal system considering variable nature of water transportation delay [Volume 29, Issue 2, 2022, Pages 749-770]
  • Das, P. P. Application of grey correlation-based EDAS method for parametric optimization of non-traditional machining processes [Volume 29, Issue 2, 2022, Pages 864-882]
  • Debata, P. Paramita A Modified Metaheuristic Algorithm Integrated ELM model for Cancer Classification [Volume 29, Issue 2, 2022, Pages 613-631]
  • Dev, N. Proximity effects between two plus-plan shaped high-rise buildings on mean and RMS pressure coefficients [Volume 29, Issue 3, 2022, Pages 990-1005]

E

  • Ebrahimi, H. Security constrained optimal power flow in a power system based on energy storage system with high wind penetration [Volume 29, Issue 3, 2022, Pages 1475-1485]
  • Emadi, S. Reliability evaluation of software architectural styles based on correlated component failure [Volume 29, Issue 1, 2022, Pages 135-149]
  • Epackachi, S. Failure analysis of the 16-story Plasco building under fire condition [Volume 29, Issue 3, 2022, Pages 1107-1124]
  • Etebari, F. A vehicle routing problem with two types of ships in container terminals [Volume 29, Issue 1, 2022, Pages 447-460]
  • Eydi, A. Urban transportation network reliability calculation considering correlation among the links comprising a route [Volume 29, Issue 3, 2022, Pages 1742-1754]

F

  • Fakhrabadi, M. A combined benders decomposition and Lagrangian relaxation algorithm for optimizing a multi-product, multi-level omni-channel distribution system [Volume 29, Issue 1, 2022, Pages 355-371]
  • Faramarzi, D. An incentive-based policy on minimization of GHG emissions and loss using adaptive group search multi-objective optimization algorithm [Volume 29, Issue 1, 2022, Pages 230-246]
  • Fardfarimani, N. Comparative modeling of abrasive waterjet machining process based on OA-Taguchi and D-optimal approach and optimization using simulated annealing algorithm [Volume 29, Issue 3, 2022, Pages 1276-1287]
  • Farhang Moghaddam, B. An optimization model for scheduling freight trains on a single-rail track [Volume 29, Issue 2, 2022, Pages 853-863]
  • Farooq, M. A new nonparametric composite exponentially weighted moving average sign control chart [Volume 29, Issue 1, 2022, Pages 290-302]
  • Faroughi, A. R. Simulation of the force-displacement behavior of reinforced concrete beams under different degrees and locations of corrosion [Volume 29, Issue 3, 2022, Pages 964-972]
  • Farzipoor Saen, R. Stepwise pricing in evaluating revenue efficiency in data envelopment analysis: A case study of power plants [Volume 29, Issue 2, 2022, Pages 915-928]
  • Fathi, M. B. Study of UV-Vis absorption spectra of magnetic molecule tripyridinium bis[tetrabromidoferrate(III)] bromide with density functional formalisms [Volume 29, Issue 3, 2022, Pages 1319-1329]
  • Fathollahi-Fard, A. M. Metaheuristics for a bi-objective green vendor managed inventory problem in a two-echelon supply chain network [Volume 29, Issue 2, 2022, Pages 816-837]
  • Fatima, S. Computational exploration of charge transfer dynamics in dye sensitized SnO2 and ZnS for photocatalytic applications [Volume 29, Issue 3, 2022, Pages 1330-1337]
  • Feng, D. Analysis of loading distribution for SRB and TSRB combined bearing [Volume 29, Issue 2, 2022, Pages 478-485]
  • Foroozesh, N. Maintenance policy selection considering resilience engineering by a new interval-valued fuzzy decision model under uncertain conditions [Volume 29, Issue 2, 2022, Pages 783-799]

G

  • Gandjalikhan Nassab, S. A. Novel design of natural double-pass solar air heater for higher thermal performance using vortex generator [Volume 29, Issue 3, 2022, Pages 1185-1196]
  • Gao, K. Optimizing two multi-echelon inventory systems for perishable products with price and stock dependent demand in supply chain [Volume 29, Issue 1, 2022, Pages 320-342]
  • Ghadimi, A. Experimental and numerical investigation of the effects of incorporation of one and two steps to a mono-hull planing vessel on its performance in calm water [Volume 29, Issue 3, 2022, Pages 1169-1184]
  • Ghadimi, P. Experimental and numerical investigation of the effects of incorporation of one and two steps to a mono-hull planing vessel on its performance in calm water [Volume 29, Issue 3, 2022, Pages 1169-1184]
  • Ghaemi, A. Investigation of operational parameters in the separation factor of praseodymium and neodymium from model NdFeB magnet-leaching solution in the solvent extraction: Optimization by response surface methodology [Volume 29, Issue 3, 2022, Pages 1391-1409]
  • Ghafari Someh, N. Efficiency assessment of medical diagnostic laboratories using undesirable sustainability indicators: A network data envelopment analysis approach [Volume 29, Issue 3, 2022, Pages 1646-1661]
  • Ghamari Kargar, P. Copper (II) supported on a post-modified Magnetic pectin Fe3O4@Pectin~Imidazole~SO3H-Cu(II): An efficient biopolymer-based catalyst for selective oxidation of alcohols with aqueous TBHP [Volume 29, Issue 3, 2022, Pages 1338-1350]
  • Gharibpour, H. Electricity market assessment in wind energy integrated power systems with the potential of flexibility: A boundary condition approach [Volume 29, Issue 2, 2022, Pages 727-738]
  • Ghasemi, M. Copper (II) supported on a post-modified Magnetic pectin Fe3O4@Pectin~Imidazole~SO3H-Cu(II): An efficient biopolymer-based catalyst for selective oxidation of alcohols with aqueous TBHP [Volume 29, Issue 3, 2022, Pages 1338-1350]
  • Ghias, N. Effect of insertion process on biceps tendon reconstruction in BASHTI technique: An in-vitro study [Volume 29, Issue 3, 2022, Pages 1265-1275]
  • Ghodsypour, S. H. Impact of adopting quick response and agility on supply chain competition with strategic customer behavior [Volume 29, Issue 1, 2022, Pages 387-411]
  • Gholami, M. A quasi-3D modified strain gradient formulation for static bending of functionally graded micro beams resting on Winkler-Pasternak elastic foundation [Volume 29, Issue 1, 2022, Pages 26-40]
  • Gitinavard, H. Maintenance policy selection considering resilience engineering by a new interval-valued fuzzy decision model under uncertain conditions [Volume 29, Issue 2, 2022, Pages 783-799]
  • Goel, R. Ground Vehicle and UAV Collaborative Routing and Scheduling for Humanitarian logistics using Random Walk Based Ant Colony Optimization [Volume 29, Issue 2, 2022, Pages 632-644]
  • Gokler, S. H. Determining optimal machine part replacement time using a hybrid ANN- GA model [Volume 29, Issue 2, 2022, Pages 721-782]
  • Goli, A. A novel exact solution algorithm for a robust product portfolio problem under return uncertainty [Volume 29, Issue 3, 2022, Pages 1638-1645]
  • Golkarfard, H. The effect of nano-clay stabilizing treatment on the real excavation wall failure: A case study [Volume 29, Issue 3, 2022, Pages 1006-1023]
  • Golshannavaz, S. Security constrained optimal power flow in a power system based on energy storage system with high wind penetration [Volume 29, Issue 3, 2022, Pages 1475-1485]
  • Gorzin, H. Investigation of operational parameters in the separation factor of praseodymium and neodymium from model NdFeB magnet-leaching solution in the solvent extraction: Optimization by response surface methodology [Volume 29, Issue 3, 2022, Pages 1391-1409]
  • Gurdal, O. Polygonal tubular linear permanent magnet generator analysis and experimental test [Volume 29, Issue 1, 2022, Pages 168-182]

H

  • Hadi-Vencheh, A. Fuzzy mathematical models for maximizing satisfaction of contractors and clients by considering flexible start date of the project [Volume 29, Issue 3, 2022, Pages 1729-1741]
  • Hadji Molana, S. M. An optimal two-level supply chain model for Small- and Medium-sized Enterprises (SMEs) considering rework for new products and price-dependent demands [Volume 29, Issue 3, 2022, Pages 1622-1637]
  • Haeri, S. M. Effectiveness of a vertical micropile system in mitigating the liquefaction-induced lateral spreading effects on pile foundations: 1 g large-scale shake table tests [Volume 29, Issue 3, 2022, Pages 1038-1058]
  • Haghi, A. Control and stability analysis of VSC-HVDC based transmission system connected to offshore wind farm [Volume 29, Issue 1, 2022, Pages 193-207]
  • Haider Bhatti, S. Difference-type-exponential estimators based on dual auxiliary information under simple random sampling [Volume 29, Issue 1, 2022, Pages 343-354]
  • Hajiaghaei-Keshteli, M. Metaheuristics for a bi-objective green vendor managed inventory problem in a two-echelon supply chain network [Volume 29, Issue 2, 2022, Pages 816-837]
  • Hajiaghaei-Keshteli, Mostafa Impact of adopting quick response and agility on supply chain competition with strategic customer behavior [Volume 29, Issue 1, 2022, Pages 387-411]
  • Hallajisani, A. Alkali activated cedar wood as an efficient adsorbent for Pb2+ removal from aqueous solutions: Optimization, kinetic and thermodynamic study [Volume 29, Issue 3, 2022, Pages 1351-1363]
  • Hanif, M. Quantile regression-ratio-type estimators for mean estimation under complete and partial auxiliary information [Volume 29, Issue 3, 2022, Pages 1705-1715]
  • Hariyadi, H. A new approach to structural seismic responses in Mataram City: Based on the Probabilistic Seismic Hazard Analysis (PSHA) results obtained after Lombok earthquakes 2018 [Volume 29, Issue 3, 2022, Pages 1142-1153]
  • Hatami, A. Simulation of the force-displacement behavior of reinforced concrete beams under different degrees and locations of corrosion [Volume 29, Issue 3, 2022, Pages 964-972]
  • Hejri, M. On the well-posedness, equivalency, and low-complexity translation techniques of discrete-time hybrid automaton and piecewise affine systems [Volume 29, Issue 2, 2022, Pages 693-726]
  • Hemmati, A. Investigation of operational parameters in the separation factor of praseodymium and neodymium from model NdFeB magnet-leaching solution in the solvent extraction: Optimization by response surface methodology [Volume 29, Issue 3, 2022, Pages 1391-1409]
  • Hendalianpour, A. A combined benders decomposition and Lagrangian relaxation algorithm for optimizing a multi-product, multi-level omni-channel distribution system [Volume 29, Issue 1, 2022, Pages 355-371]
  • Herbert, M. A. Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique [Volume 29, Issue 2, 2022, Pages 534-542]
  • Heydarian, D. Numerical investigation of circular porous fins effect on natural heat transfer enhancement in an annulus cavity [Volume 29, Issue 2, 2022, Pages 572-587]
  • Hidayati, N. A new approach to structural seismic responses in Mataram City: Based on the Probabilistic Seismic Hazard Analysis (PSHA) results obtained after Lombok earthquakes 2018 [Volume 29, Issue 3, 2022, Pages 1142-1153]
  • Hoseinikhah, S. S. An efficient synthesis of pyrimido[4,5-b]quinoline and indenopyrido[2,3-d]pyrimidine derivatives in the presence of Fe3O4@nano-cellulose/Sb (V) as a bio-based magnetic nano-catalyst [Volume 29, Issue 3, 2022, Pages 1301-1307]
  • Hosseinian, S. H. An incentive-based policy on minimization of GHG emissions and loss using adaptive group search multi-objective optimization algorithm [Volume 29, Issue 1, 2022, Pages 230-246]
  • Hosseinian, S. H. Investigation of harmonic effects in locational marginal pricing and development of a framework for LMP calculation [Volume 29, Issue 3, 2022, Pages 1537-1546]
  • Hosseinzadeh Lotfi, F. Stepwise pricing in evaluating revenue efficiency in data envelopment analysis: A case study of power plants [Volume 29, Issue 2, 2022, Pages 915-928]

I

  • Ighalo, J. O. Evaluating the nature of captured exhaust soot from a retort heating carbonization system [Volume 29, Issue 3, 2022, Pages 1427-1435]
  • Ipekci, A. Taguchi optimization of fused deposition modeling process parameters on mechanical characteristics of PLA + filament material [Volume 29, Issue 1, 2022, Pages 79-89]
  • Irfan, M. Difference-type-exponential estimators based on dual auxiliary information under simple random sampling [Volume 29, Issue 1, 2022, Pages 343-354]
  • Izadi, M. A combined approximation method for nonlinear foam drainage equation [Volume 29, Issue 1, 2022, Pages 70-78]
  • Izadifard, R. A. Optimal design of a non-prismatic reinforced concrete box girder bridge with three meta-heuristic algorithms [Volume 29, Issue 3, 2022, Pages 1154-1167]

J

  • Jafari, M. A. Reliability-Based Approach for Fragility Analysis of Lattice Transmission Tower in the Type Test [Volume 29, Issue 3, 2022, Pages 1125-1141]
  • Jafaripour, Z. An optimal two-level supply chain model for Small- and Medium-sized Enterprises (SMEs) considering rework for new products and price-dependent demands [Volume 29, Issue 3, 2022, Pages 1622-1637]
  • Javed, M. Difference-type-exponential estimators based on dual auxiliary information under simple random sampling [Volume 29, Issue 1, 2022, Pages 343-354]
  • Jeon, B.-H. Effect of humic acid on adsorption of methylparaben from aqueous solutions onto commercially available granular activated carbons [Volume 29, Issue 3, 2022, Pages 1364-1376]
  • Jodeiri Feizi, A. Three dimensional prediction of stability lobes in end milling of thin-walled structures based on tool and workpiece dimensions [Volume 29, Issue 1, 2022, Pages 41-52]
  • Johari, A. The effect of nano-clay stabilizing treatment on the real excavation wall failure: A case study [Volume 29, Issue 3, 2022, Pages 1006-1023]

K

  • Kaffash, M. R. Behavior of concentrically braced steel frames under fire loading [Volume 29, Issue 3, 2022, Pages 951-963]
  • Kam, M. Taguchi optimization of fused deposition modeling process parameters on mechanical characteristics of PLA + filament material [Volume 29, Issue 1, 2022, Pages 79-89]
  • Kamlesh Shah, Sh. Modelling and optimization of robotic manipulator mechanism for computed tomography guided medical procedure [Volume 29, Issue 2, 2022, Pages 543-555]
  • Kar, R. An optimal radiation pattern synthesis and correction of mutually coupled circular dipole antenna array [Volume 29, Issue 3, 2022, Pages 1455-1474]
  • Karami, M. Improving thermal performance of a solar thermal/desalination combisystem using nano fluid-based direct absorption solar collector [Volume 29, Issue 3, 2022, Pages 1288-1300]
  • Karami, S. Sensitivity analysis of electromagnetic stimulation of oil wells using simulation technique and Box-Behnken design [Volume 29, Issue 3, 2022, Pages 1377-1390]
  • Karamodin, A. Behavior of concentrically braced steel frames under fire loading [Volume 29, Issue 3, 2022, Pages 951-963]
  • Karampour, M. M. Metaheuristics for a bi-objective green vendor managed inventory problem in a two-echelon supply chain network [Volume 29, Issue 2, 2022, Pages 816-837]
  • Karimi, H. Environmental effects in an integrated hub location and pricing problem [Volume 29, Issue 2, 2022, Pages 838-852]
  • Karimkhan Zand, H. A new approach to the setting of directional overcurrent relays by incorporating cascading outages [Volume 29, Issue 3, 2022, Pages 1562-1572]
  • Kasturi, K. PV/BESS for supporting electric vehicle charging station integration in a capacity-constrained power distribution grid using MCTLBO [Volume 29, Issue 3, 2022, Pages 1437-1454]
  • Kavand, A. Effectiveness of a vertical micropile system in mitigating the liquefaction-induced lateral spreading effects on pile foundations: 1 g large-scale shake table tests [Volume 29, Issue 3, 2022, Pages 1038-1058]
  • Kaveh, A. Optimal design of a non-prismatic reinforced concrete box girder bridge with three meta-heuristic algorithms [Volume 29, Issue 3, 2022, Pages 1154-1167]
  • Kaviyani-Charati, M. Impact of adopting quick response and agility on supply chain competition with strategic customer behavior [Volume 29, Issue 1, 2022, Pages 387-411]
  • Kencanawati, N. N. A new approach to structural seismic responses in Mataram City: Based on the Probabilistic Seismic Hazard Analysis (PSHA) results obtained after Lombok earthquakes 2018 [Volume 29, Issue 3, 2022, Pages 1142-1153]
  • Keyhani-Asl, A. Numerical investigation of circular porous fins effect on natural heat transfer enhancement in an annulus cavity [Volume 29, Issue 2, 2022, Pages 572-587]
  • Khademi Zare, H. A novel exact solution algorithm for a robust product portfolio problem under return uncertainty [Volume 29, Issue 3, 2022, Pages 1638-1645]
  • Khalil, A. Efficient estimation of population median using supplementary variable [Volume 29, Issue 1, 2022, Pages 265-274]
  • Khazaeli, F. Fuzzy mathematical models for maximizing satisfaction of contractors and clients by considering flexible start date of the project [Volume 29, Issue 3, 2022, Pages 1729-1741]
  • Kilicaslan, S. Control of active suspension system in the presence of nonlinear spring and damper [Volume 29, Issue 3, 2022, Pages 1221-1235]
  • Kolahan, F. Comparative modeling of abrasive waterjet machining process based on OA-Taguchi and D-optimal approach and optimization using simulated annealing algorithm [Volume 29, Issue 3, 2022, Pages 1276-1287]
  • Kolahdoozan, M. Development of a 2D depth-averaged model for calculating scouring and deposition in alluvial streams [Volume 29, Issue 3, 2022, Pages 941-950]
  • Kouhi, H. Attitude Control of a Spacecraft during an Orbital Maneuver for Fast Rejecting of the Large Disturbance Torque without Using the Reaction Control System [Volume 29, Issue 2, 2022, Pages 597-611]
  • Kumar, S. Manufacturer-retailer integrated inventory model with controllable lead time and service level constraint under the effect of learning-forgetting in setup cost [Volume 29, Issue 2, 2022, Pages 800-815]
  • Kumar Nayak, C. PV/BESS for supporting electric vehicle charging station integration in a capacity-constrained power distribution grid using MCTLBO [Volume 29, Issue 3, 2022, Pages 1437-1454]
  • Kurade, M. B. Effect of humic acid on adsorption of methylparaben from aqueous solutions onto commercially available granular activated carbons [Volume 29, Issue 3, 2022, Pages 1364-1376]

L

  • Lakshmi Devi, G. Effects of chemical reactions, radiation, and activation energy on MHD buoyancy induced nano fluidflow past a vertical surface [Volume 29, Issue 1, 2022, Pages 90-100]
  • Li, L. An analytical state-space solution for free vibration of sandwich piezoelectric plate with functionally graded core [Volume 29, Issue 2, 2022, Pages 502-533]
  • Li, P. Dynamic correlation and volatility spillover between the stock markets of Shenzhen and Hong Kong [Volume 29, Issue 3, 2022, Pages 1716-1728]
  • Liu, P. Complex q-rung orthopair fuzzy variation coefficient similarity measures and their approach to medical diagnosis and pattern recognition [Volume 29, Issue 2, 2022, Pages 894-914]
  • Livani, M. Prediction of work-rolls failure in hot ring rolling process [Volume 29, Issue 2, 2022, Pages 461-477]
  • Luo, K. Analysis of loading distribution for SRB and TSRB combined bearing [Volume 29, Issue 2, 2022, Pages 478-485]
  • Luo, W. Mechanical safety analysis of the gas lift completion string used for a high-pressure sandwich layer [Volume 29, Issue 1, 2022, Pages 1-12]

M

  • Maftouni, N. A CFD study of a flanged shrouded wind turbine: Effects of different flange surface types on output power [Volume 29, Issue 1, 2022, Pages 101-108]
  • Mahboubkhah, M. Three dimensional prediction of stability lobes in end milling of thin-walled structures based on tool and workpiece dimensions [Volume 29, Issue 1, 2022, Pages 41-52]
  • Mahmood, T. Complex q-rung orthopair fuzzy variation coefficient similarity measures and their approach to medical diagnosis and pattern recognition [Volume 29, Issue 2, 2022, Pages 894-914]
  • Mahmoodi, A. H. Linguistic Z-number Muirhead mean operators and their applications in ethical-financial portfolio selection [Volume 29, Issue 3, 2022, Pages 1592-1621]
  • Mahmoudabadi, A. An application of energy efficiency programs to multi-stage transmission network expansion and reactive power planning [Volume 29, Issue 3, 2022, Pages 1547-1561]
  • Mahmoudi, A. Reliability-Based Approach for Fragility Analysis of Lattice Transmission Tower in the Type Test [Volume 29, Issue 3, 2022, Pages 1125-1141]
  • Maini, R. Ground Vehicle and UAV Collaborative Routing and Scheduling for Humanitarian logistics using Random Walk Based Ant Colony Optimization [Volume 29, Issue 2, 2022, Pages 632-644]
  • Maleki, A. Investigation of operational parameters in the separation factor of praseodymium and neodymium from model NdFeB magnet-leaching solution in the solvent extraction: Optimization by response surface methodology [Volume 29, Issue 3, 2022, Pages 1391-1409]
  • Manavizadeh, N. A hybrid metaheuristic algorithm for data driven leagile sustainable closed-loop supply chain modeling under disruption risk [Volume 29, Issue 3, 2022, Pages 1685-1704]
  • Manavizadeh, N. Cooperative advertising with two local advertising options in a retailer duopoly [Volume 29, Issue 1, 2022, Pages 412-426]
  • Mandal, D. An optimal radiation pattern synthesis and correction of mutually coupled circular dipole antenna array [Volume 29, Issue 3, 2022, Pages 1455-1474]
  • Maracy, A. Prediction of work-rolls failure in hot ring rolling process [Volume 29, Issue 2, 2022, Pages 461-477]
  • Mashinchi, M. Monitoring mean and variability by Gini chart for skew-normal distributed data [Volume 29, Issue 2, 2022, Pages 883-893]
  • Masud, M. Minimizing the casting defects in high-pressure die casting using Taguchi analysis [Volume 29, Issue 1, 2022, Pages 53-69]
  • Mazlumi, K. A new approach to the setting of directional overcurrent relays by incorporating cascading outages [Volume 29, Issue 3, 2022, Pages 1562-1572]
  • Mebarek-Oudina, F. Sensitivity analysis for Walters-B nanoliquid flow over a radiative Riga surface by RSM [Volume 29, Issue 3, 2022, Pages 1236-1249]
  • Meng, Y. Effect of the Shenzhen-Hong Kong stock connect mechanism on stock market volatility [Volume 29, Issue 1, 2022, Pages 372-386]
  • Meng, Y. Dynamic correlation and volatility spillover between the stock markets of Shenzhen and Hong Kong [Volume 29, Issue 3, 2022, Pages 1716-1728]
  • Mesbahi, M. The effect of nano-clay stabilizing treatment on the real excavation wall failure: A case study [Volume 29, Issue 3, 2022, Pages 1006-1023]
  • Miao, E. Analysis of loading distribution for SRB and TSRB combined bearing [Volume 29, Issue 2, 2022, Pages 478-485]
  • Mikani, M. Simultaneous spectrofluorometric analysis of caffeic and ellagic acids through inclusion complex formation with γ-Cyclodextrin [Volume 29, Issue 3, 2022, Pages 1308-1318]
  • Mirghaderi, S. R. Failure analysis of the 16-story Plasco building under fire condition [Volume 29, Issue 3, 2022, Pages 1107-1124]
  • Mirjalili, B. F. An efficient synthesis of pyrimido[4,5-b]quinoline and indenopyrido[2,3-d]pyrimidine derivatives in the presence of Fe3O4@nano-cellulose/Sb (V) as a bio-based magnetic nano-catalyst [Volume 29, Issue 3, 2022, Pages 1301-1307]
  • Mirsalim, M. A dual-stator machine with diametrically magnetized PM: Analytical air-gap flux calculation, efficiency optimization, and comparison with conventional dual-stator machines [Volume 29, Issue 1, 2022, Pages 208-216]
  • Mishra, R. Modelling and optimization of robotic manipulator mechanism for computed tomography guided medical procedure [Volume 29, Issue 2, 2022, Pages 543-555]
  • Mishra, S. A branch-oriented active power loss allocation method for radial distribution networks with distributed generators [Volume 29, Issue 3, 2022, Pages 1506-1522]
  • Moghaddas, Z. Stepwise pricing in evaluating revenue efficiency in data envelopment analysis: A case study of power plants [Volume 29, Issue 2, 2022, Pages 915-928]
  • Moghiman, M. Behavior of concentrically braced steel frames under fire loading [Volume 29, Issue 3, 2022, Pages 951-963]
  • Mogouie, H. Monitoring attributed social networks based on count data and random effects [Volume 29, Issue 3, 2022, Pages 1581-1591]
  • Mohajeri, M. Using association rules to investigate causality patterns of safety-related incidents in the construction industry [Volume 29, Issue 2, 2022, Pages 929-939]
  • Mohammadi, E. An equation for estimating the maximum normal strain of buried steel pipes in bend area under propagating waves in sands [Volume 29, Issue 3, 2022, Pages 973-989]
  • Mohammadi, M. Environmental effects in an integrated hub location and pricing problem [Volume 29, Issue 2, 2022, Pages 838-852]
  • Mohammadi Ivatloo, B. Security constrained optimal power flow in a power system based on energy storage system with high wind penetration [Volume 29, Issue 3, 2022, Pages 1475-1485]
  • Mohammadzade, H. Sequential nonlinear encoding: A low dimensional regression algorithm with application to EEG-based driving fatigue detection [Volume 29, Issue 3, 2022, Pages 1486-1505]
  • Mohapatra, P. A Modified Metaheuristic Algorithm Integrated ELM model for Cancer Classification [Volume 29, Issue 2, 2022, Pages 613-631]
  • Mohseni, M. Effect of insertion process on biceps tendon reconstruction in BASHTI technique: An in-vitro study [Volume 29, Issue 3, 2022, Pages 1265-1275]
  • Mojtahedi, M. Maintenance policy selection considering resilience engineering by a new interval-valued fuzzy decision model under uncertain conditions [Volume 29, Issue 2, 2022, Pages 783-799]
  • Mokaddes Ali, M. Magneto-hydrodynamic mixed convective heat transfer in a nanofluid filled wavy conduit having rotating cylinders [Volume 29, Issue 2, 2022, Pages 486-501]
  • Mokhtari, H. On the well-posedness, equivalency, and low-complexity translation techniques of discrete-time hybrid automaton and piecewise affine systems [Volume 29, Issue 2, 2022, Pages 693-726]
  • Mottaghi, L. Optimal design of a non-prismatic reinforced concrete box girder bridge with three meta-heuristic algorithms [Volume 29, Issue 3, 2022, Pages 1154-1167]
  • Mousavi, S.M. Maintenance policy selection considering resilience engineering by a new interval-valued fuzzy decision model under uncertain conditions [Volume 29, Issue 2, 2022, Pages 783-799]
  • Movahedi Sobhani, F. Linguistic Z-number Muirhead mean operators and their applications in ethical-financial portfolio selection [Volume 29, Issue 3, 2022, Pages 1592-1621]
  • Movahhedy, M. R. Three dimensional prediction of stability lobes in end milling of thin-walled structures based on tool and workpiece dimensions [Volume 29, Issue 1, 2022, Pages 41-52]
  • Muneer, S. Efficient estimation of population median using supplementary variable [Volume 29, Issue 1, 2022, Pages 265-274]
  • Munir, S. Computational exploration of charge transfer dynamics in dye sensitized SnO2 and ZnS for photocatalytic applications [Volume 29, Issue 3, 2022, Pages 1330-1337]
  • Mutlu Aydin, M. Design of an efficient vehicle-actuated signal control logic for signalized intersections [Volume 29, Issue 3, 2022, Pages 1059-1076]

N

  • Nagar, S. K. Proximity effects between two plus-plan shaped high-rise buildings on mean and RMS pressure coefficients [Volume 29, Issue 3, 2022, Pages 990-1005]
  • Narimani, M. Investigation of harmonic effects in locational marginal pricing and development of a framework for LMP calculation [Volume 29, Issue 3, 2022, Pages 1537-1546]
  • Narjis, Gh. Efficient estimation of population median using supplementary variable [Volume 29, Issue 1, 2022, Pages 265-274]
  • Nasiri Gahraz, S. S. Improving thermal performance of a solar thermal/desalination combisystem using nano fluid-based direct absorption solar collector [Volume 29, Issue 3, 2022, Pages 1288-1300]
  • Nasrollahzadeh, K. Reliability-Based Approach for Fragility Analysis of Lattice Transmission Tower in the Type Test [Volume 29, Issue 3, 2022, Pages 1125-1141]
  • Nazari, M. H. An incentive-based policy on minimization of GHG emissions and loss using adaptive group search multi-objective optimization algorithm [Volume 29, Issue 1, 2022, Pages 230-246]
  • Negahban Boron, A. Prediction of work-rolls failure in hot ring rolling process [Volume 29, Issue 2, 2022, Pages 461-477]
  • Nezamivand Chegini, S. A generalized differential quadrature-based computational model for describing free vibrations behavior of functionally graded circular plates around buckled configuration [Volume 29, Issue 3, 2022, Pages 1250-1264]
  • Niknam, T. Expansion planning of automated sub-transmission and distribution networks integrated by distributed generations [Volume 29, Issue 2, 2022, Pages 645-659]
  • Nikoobakht, A. Expansion planning of automated sub-transmission and distribution networks integrated by distributed generations [Volume 29, Issue 2, 2022, Pages 645-659]
  • Nikouei, S. M. Prediction of work-rolls failure in hot ring rolling process [Volume 29, Issue 2, 2022, Pages 461-477]
  • Niranjan, H. Effects of chemical reactions, radiation, and activation energy on MHD buoyancy induced nano fluidflow past a vertical surface [Volume 29, Issue 1, 2022, Pages 90-100]
  • Noori Khezrabad, A. Performance and dynamic response enhancement of PMSG- based wind turbines employing boost converter-diode rectifier as the machine-side converter [Volume 29, Issue 3, 2022, Pages 1523-1536]
  • Norouzi, S. Development of a 2D depth-averaged model for calculating scouring and deposition in alluvial streams [Volume 29, Issue 3, 2022, Pages 941-950]
  • Nouralishahi, A. Alkali activated cedar wood as an efficient adsorbent for Pb2+ removal from aqueous solutions: Optimization, kinetic and thermodynamic study [Volume 29, Issue 3, 2022, Pages 1351-1363]
  • Nourani, A. Effect of insertion process on biceps tendon reconstruction in BASHTI technique: An in-vitro study [Volume 29, Issue 3, 2022, Pages 1265-1275]
  • Nuantong, W. Angle design of stator-rotor blades for VLH axial flow turbine using surrogate-based optimization [Volume 29, Issue 1, 2022, Pages 13-25]

O

  • Onifade, D. V. Evaluating the nature of captured exhaust soot from a retort heating carbonization system [Volume 29, Issue 3, 2022, Pages 1427-1435]
  • Ostadi, B. A novel risk assessment approach using Monte Carlo simulation based on co-occurrence of risk factors: A case study of a petrochemical plant construction [Volume 29, Issue 3, 2022, Pages 1755-1765]

P

  • Parniani, M. A comparative analysis of the new excitation controlled synchronous generator-based wind turbine [Volume 29, Issue 1, 2022, Pages 151-167]
  • Pasandideh, S. H. R. A multi-objective two-echelon newsvendor problem with limited budget and capacity [Volume 29, Issue 1, 2022, Pages 275-289]
  • Patel, N. A comparative study of economic load dispatch with complex non-linear constraints using salp swarm algorithm [Volume 29, Issue 2, 2022, Pages 676-692]
  • Pattnaik, S. A generalized finite element approach to the free vibration analysis of non-uniform axially functionally graded beam [Volume 29, Issue 2, 2022, Pages 556-571]
  • Peng, X. Single-valued neutrosophic linguistic reducible weighted MSM for tourism mobile e-commerce service quality evaluation [Volume 29, Issue 1, 2022, Pages 247-264]
  • Pholdee, N. Angle design of stator-rotor blades for VLH axial flow turbine using surrogate-based optimization [Volume 29, Issue 1, 2022, Pages 13-25]
  • Pishvaee, M. S. Efficiency assessment of medical diagnostic laboratories using undesirable sustainability indicators: A network data envelopment analysis approach [Volume 29, Issue 3, 2022, Pages 1646-1661]
  • Pourasad, Y. Modified tumor diagnosis by classification and use of canonical correlation and support vector machines methods [Volume 29, Issue 1, 2022, Pages 121-134]
  • Pourmousa, R. Monitoring mean and variability by Gini chart for skew-normal distributed data [Volume 29, Issue 2, 2022, Pages 883-893]
  • Prabhu, S.R. Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique [Volume 29, Issue 2, 2022, Pages 534-542]
  • Prasad Hota, A A branch-oriented active power loss allocation method for radial distribution networks with distributed generators [Volume 29, Issue 3, 2022, Pages 1506-1522]

Q

  • Qi, W. Mechanical safety analysis of the gas lift completion string used for a high-pressure sandwich layer [Volume 29, Issue 1, 2022, Pages 1-12]

R

  • Rabbani, M. A hybrid metaheuristic algorithm for data driven leagile sustainable closed-loop supply chain modeling under disruption risk [Volume 29, Issue 3, 2022, Pages 1685-1704]
  • Rafieyan, O. An assessment of data mining and bivariate statistical methods for landslide susceptibility mapping [Volume 29, Issue 3, 2022, Pages 1077-1094]
  • Rahbar-Kelishami, A. Investigation of operational parameters in the separation factor of praseodymium and neodymium from model NdFeB magnet-leaching solution in the solvent extraction: Optimization by response surface methodology [Volume 29, Issue 3, 2022, Pages 1391-1409]
  • Rahimi, M. Control and stability analysis of VSC-HVDC based transmission system connected to offshore wind farm [Volume 29, Issue 1, 2022, Pages 193-207]
  • Rahimi, M. Performance and dynamic response enhancement of PMSG- based wind turbines employing boost converter-diode rectifier as the machine-side converter [Volume 29, Issue 3, 2022, Pages 1523-1536]
  • Rahmanian, R. Simultaneous spectrofluorometric analysis of caffeic and ellagic acids through inclusion complex formation with γ-Cyclodextrin [Volume 29, Issue 3, 2022, Pages 1308-1318]
  • Rahmatnia, M. A. Alkali activated cedar wood as an efficient adsorbent for Pb2+ removal from aqueous solutions: Optimization, kinetic and thermodynamic study [Volume 29, Issue 3, 2022, Pages 1351-1363]
  • Raisianzadeh, J. Effectiveness of a vertical micropile system in mitigating the liquefaction-induced lateral spreading effects on pile foundations: 1 g large-scale shake table tests [Volume 29, Issue 3, 2022, Pages 1038-1058]
  • Raissi Ardali, Gh. A. Monitoring attributed social networks based on count data and random effects [Volume 29, Issue 3, 2022, Pages 1581-1591]
  • Raj, R. Proximity effects between two plus-plan shaped high-rise buildings on mean and RMS pressure coefficients [Volume 29, Issue 3, 2022, Pages 990-1005]
  • Ranjan Nayak, M. PV/BESS for supporting electric vehicle charging station integration in a capacity-constrained power distribution grid using MCTLBO [Volume 29, Issue 3, 2022, Pages 1437-1454]
  • Rao, C. Effect of the Shenzhen-Hong Kong stock connect mechanism on stock market volatility [Volume 29, Issue 1, 2022, Pages 372-386]
  • Rao, C. Dynamic correlation and volatility spillover between the stock markets of Shenzhen and Hong Kong [Volume 29, Issue 3, 2022, Pages 1716-1728]
  • Rao, S. S. Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique [Volume 29, Issue 2, 2022, Pages 534-542]
  • Rasaizadi, A. Short-term prediction of traffic state: Statistical approach versus machine learning approach [Volume 29, Issue 3, 2022, Pages 1095-1106]
  • Rashidinejad, M. An application of energy efficiency programs to multi-stage transmission network expansion and reactive power planning [Volume 29, Issue 3, 2022, Pages 1547-1561]
  • Rasool, G. Sensitivity analysis for Walters-B nanoliquid flow over a radiative Riga surface by RSM [Volume 29, Issue 3, 2022, Pages 1236-1249]
  • Ray, R. N. Optimal scheduling of hydrothermal system considering variable nature of water transportation delay [Volume 29, Issue 2, 2022, Pages 749-770]
  • Raza, M. A. A new nonparametric composite exponentially weighted moving average sign control chart [Volume 29, Issue 1, 2022, Pages 290-302]
  • Razmi, J. A combined benders decomposition and Lagrangian relaxation algorithm for optimizing a multi-product, multi-level omni-channel distribution system [Volume 29, Issue 1, 2022, Pages 355-371]
  • Rehman, Z. Minimizing the casting defects in high-pressure die casting using Taguchi analysis [Volume 29, Issue 1, 2022, Pages 53-69]
  • Rezazadeh, G. Design and optimization of a large-scale permanent magnet synchronous generator [Volume 29, Issue 1, 2022, Pages 217-229]
  • Rouzegar, J. An analytical state-space solution for free vibration of sandwich piezoelectric plate with functionally graded core [Volume 29, Issue 2, 2022, Pages 502-533]
  • Rushd, S. Magneto-hydrodynamic mixed convective heat transfer in a nanofluid filled wavy conduit having rotating cylinders [Volume 29, Issue 2, 2022, Pages 486-501]

S

  • Saadatmand, M. A generalized differential quadrature-based computational model for describing free vibrations behavior of functionally graded circular plates around buckled configuration [Volume 29, Issue 3, 2022, Pages 1250-1264]
  • Sadati, K. Roll restoring coefficients of planing boats' maneuver using 2D + t approach [Volume 29, Issue 3, 2022, Pages 1197-1209]
  • Sadeghieh, A. A novel exact solution algorithm for a robust product portfolio problem under return uncertainty [Volume 29, Issue 3, 2022, Pages 1638-1645]
  • Sadegh Moghanlou, F. Numerical investigation of circular porous fins effect on natural heat transfer enhancement in an annulus cavity [Volume 29, Issue 2, 2022, Pages 572-587]
  • Sadi-Nezhad, S. Linguistic Z-number Muirhead mean operators and their applications in ethical-financial portfolio selection [Volume 29, Issue 3, 2022, Pages 1592-1621]
  • Sadjadi, S. J. Linguistic Z-number Muirhead mean operators and their applications in ethical-financial portfolio selection [Volume 29, Issue 3, 2022, Pages 1592-1621]
  • Sadjadi, S. J. Efficiency assessment of medical diagnostic laboratories using undesirable sustainability indicators: A network data envelopment analysis approach [Volume 29, Issue 3, 2022, Pages 1646-1661]
  • Saedi, S. An assessment of data mining and bivariate statistical methods for landslide susceptibility mapping [Volume 29, Issue 3, 2022, Pages 1077-1094]
  • Saeedi Dehaghani, A. H. Sensitivity analysis of electromagnetic stimulation of oil wells using simulation technique and Box-Behnken design [Volume 29, Issue 3, 2022, Pages 1377-1390]
  • Safaeian, M. A vehicle routing problem with two types of ships in container terminals [Volume 29, Issue 1, 2022, Pages 447-460]
  • Safarzadeh, S. Convective heat transfer and flow phenomena from a rotating sphere in porous media [Volume 29, Issue 2, 2022, Pages 588-596]
  • Sahu, R. P. A generalized finite element approach to the free vibration analysis of non-uniform axially functionally graded beam [Volume 29, Issue 2, 2022, Pages 556-571]
  • Sajadi, S. M. An optimal two-level supply chain model for Small- and Medium-sized Enterprises (SMEs) considering rework for new products and price-dependent demands [Volume 29, Issue 3, 2022, Pages 1622-1637]
  • Sajedi, S. M. Experimental and numerical investigation of the effects of incorporation of one and two steps to a mono-hull planing vessel on its performance in calm water [Volume 29, Issue 3, 2022, Pages 1169-1184]
  • Sajjad, I. Quantile regression-ratio-type estimators for mean estimation under complete and partial auxiliary information [Volume 29, Issue 3, 2022, Pages 1705-1715]
  • Salehi, N. An efficient synthesis of pyrimido[4,5-b]quinoline and indenopyrido[2,3-d]pyrimidine derivatives in the presence of Fe3O4@nano-cellulose/Sb (V) as a bio-based magnetic nano-catalyst [Volume 29, Issue 3, 2022, Pages 1301-1307]
  • Salmanpour, N. An analytical state-space solution for free vibration of sandwich piezoelectric plate with functionally graded core [Volume 29, Issue 2, 2022, Pages 502-533]
  • Samadi Ghoshchi, H. Modified tumor diagnosis by classification and use of canonical correlation and support vector machines methods [Volume 29, Issue 1, 2022, Pages 121-134]
  • Sangari, M. S. A combined benders decomposition and Lagrangian relaxation algorithm for optimizing a multi-product, multi-level omni-channel distribution system [Volume 29, Issue 1, 2022, Pages 355-371]
  • Sasaei, M. Monitoring mean and variability by Gini chart for skew-normal distributed data [Volume 29, Issue 2, 2022, Pages 883-893]
  • Sazi Murat, Y. Design of an efficient vehicle-actuated signal control logic for signalized intersections [Volume 29, Issue 3, 2022, Pages 1059-1076]
  • Sengul, O. Taguchi optimization of fused deposition modeling process parameters on mechanical characteristics of PLA + filament material [Volume 29, Issue 1, 2022, Pages 79-89]
  • Seyedabrishami, S. E. Short-term prediction of traffic state: Statistical approach versus machine learning approach [Volume 29, Issue 3, 2022, Pages 1095-1106]
  • Shabbir, J. Efficient estimation of population median using supplementary variable [Volume 29, Issue 1, 2022, Pages 265-274]
  • Shafaghat, E. Enhanced Automated Quantity Take-Off in Building Information Modeling Enhanced automated quantity take-off in building information modeling [Volume 29, Issue 3, 2022, Pages 1024-1037]
  • Shafiq, A. Sensitivity analysis for Walters-B nanoliquid flow over a radiative Riga surface by RSM [Volume 29, Issue 3, 2022, Pages 1236-1249]
  • Shahabodini, A. A generalized differential quadrature-based computational model for describing free vibrations behavior of functionally graded circular plates around buckled configuration [Volume 29, Issue 3, 2022, Pages 1250-1264]
  • Shahedi Asl, M. Numerical investigation of circular porous fins effect on natural heat transfer enhancement in an annulus cavity [Volume 29, Issue 2, 2022, Pages 572-587]
  • Shahzad, U. Quantile regression-ratio-type estimators for mean estimation under complete and partial auxiliary information [Volume 29, Issue 3, 2022, Pages 1705-1715]
  • Shamsnia, A. A comparative analysis of the new excitation controlled synchronous generator-based wind turbine [Volume 29, Issue 1, 2022, Pages 151-167]
  • Shayanfar, M. A. Simulation of the force-displacement behavior of reinforced concrete beams under different degrees and locations of corrosion [Volume 29, Issue 3, 2022, Pages 964-972]
  • Sheikhnejad, Y. Novel design of natural double-pass solar air heater for higher thermal performance using vortex generator [Volume 29, Issue 3, 2022, Pages 1185-1196]
  • Sheikholeslami, M. Experimental and numerical investigation of the effects of incorporation of one and two steps to a mono-hull planing vessel on its performance in calm water [Volume 29, Issue 3, 2022, Pages 1169-1184]
  • Sherafat, B. Enhanced Automated Quantity Take-Off in Building Information Modeling Enhanced automated quantity take-off in building information modeling [Volume 29, Issue 3, 2022, Pages 1024-1037]
  • Sherafat, E. Short-term prediction of traffic state: Statistical approach versus machine learning approach [Volume 29, Issue 3, 2022, Pages 1095-1106]
  • Sherwani, R. A. K. A new nonparametric composite exponentially weighted moving average sign control chart [Volume 29, Issue 1, 2022, Pages 290-302]
  • Shettigar, A. Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique [Volume 29, Issue 2, 2022, Pages 534-542]
  • Shi, l. Analysis of loading distribution for SRB and TSRB combined bearing [Volume 29, Issue 2, 2022, Pages 478-485]
  • Sindhu, T. N. Sensitivity analysis for Walters-B nanoliquid flow over a radiative Riga surface by RSM [Volume 29, Issue 3, 2022, Pages 1236-1249]
  • Singh, S. R. Manufacturer-retailer integrated inventory model with controllable lead time and service level constraint under the effect of learning-forgetting in setup cost [Volume 29, Issue 2, 2022, Pages 800-815]
  • Sivasankaran, S. Effects of chemical reactions, radiation, and activation energy on MHD buoyancy induced nano fluidflow past a vertical surface [Volume 29, Issue 1, 2022, Pages 90-100]
  • Solaimany Nazar, A. R. Effect of humic acid on adsorption of methylparaben from aqueous solutions onto commercially available granular activated carbons [Volume 29, Issue 3, 2022, Pages 1364-1376]
  • Soltani, R. Linguistic Z-number Muirhead mean operators and their applications in ethical-financial portfolio selection [Volume 29, Issue 3, 2022, Pages 1592-1621]
  • Soltani, R. Efficiency assessment of medical diagnostic laboratories using undesirable sustainability indicators: A network data envelopment analysis approach [Volume 29, Issue 3, 2022, Pages 1646-1661]
  • S. Sajadieh, Mohsen Robust optimization approach for pricing and shelf space decisions with uncertain demand [Volume 29, Issue 1, 2022, Pages 303-319]
  • Sukerta, I. M. A new approach to structural seismic responses in Mataram City: Based on the Probabilistic Seismic Hazard Analysis (PSHA) results obtained after Lombok earthquakes 2018 [Volume 29, Issue 3, 2022, Pages 1142-1153]
  • Sun, X. Effect of the Shenzhen-Hong Kong stock connect mechanism on stock market volatility [Volume 29, Issue 1, 2022, Pages 372-386]
  • Surakampontorn, W. Tunable active grounded lossless and lossy inductance simulators with single grounded capacitor using VDBAs [Volume 29, Issue 2, 2022, Pages 739-748]
  • Sutar, M. K. A generalized finite element approach to the free vibration analysis of non-uniform axially functionally graded beam [Volume 29, Issue 2, 2022, Pages 556-571]

T

  • Tabejamaat, M. Sequential nonlinear encoding: A low dimensional regression algorithm with application to EEG-based driving fatigue detection [Volume 29, Issue 3, 2022, Pages 1486-1505]
  • Taechajedcadarungsri, S. Angle design of stator-rotor blades for VLH axial flow turbine using surrogate-based optimization [Volume 29, Issue 1, 2022, Pages 13-25]
  • Taghaddos, H. Enhanced Automated Quantity Take-Off in Building Information Modeling Enhanced automated quantity take-off in building information modeling [Volume 29, Issue 3, 2022, Pages 1024-1037]
  • Taghaddosi, M. A CFD study of a flanged shrouded wind turbine: Effects of different flange surface types on output power [Volume 29, Issue 1, 2022, Pages 101-108]
  • Tahami, F. Design and optimization of a large-scale permanent magnet synchronous generator [Volume 29, Issue 1, 2022, Pages 217-229]
  • Tamer Erturk, A. Effect of Vibration Parameters on the Shot Velocity in SMAT Process Using Dynamic Finite Element Analysis [Volume 29, Issue 3, 2022, Pages 1210-1220]
  • Tangsrirat, W. Tunable active grounded lossless and lossy inductance simulators with single grounded capacitor using VDBAs [Volume 29, Issue 2, 2022, Pages 739-748]
  • Tariq, A. Minimizing the casting defects in high-pressure die casting using Taguchi analysis [Volume 29, Issue 1, 2022, Pages 53-69]
  • Tariq, S. Minimizing the casting defects in high-pressure die casting using Taguchi analysis [Volume 29, Issue 1, 2022, Pages 53-69]
  • Tavakkoli-Moghaddam, R. A novel exact solution algorithm for a robust product portfolio problem under return uncertainty [Volume 29, Issue 3, 2022, Pages 1638-1645]
  • Tavakkoli Nabavi, M. Comparative modeling of abrasive waterjet machining process based on OA-Taguchi and D-optimal approach and optimization using simulated annealing algorithm [Volume 29, Issue 3, 2022, Pages 1276-1287]
  • Tavazoei, M. S. Tuning the implementable structures of fractional-order PID controllers for control of FOPDT processes [Volume 29, Issue 2, 2022, Pages 660-675]
  • Tehranchi, M. M. Study of UV-Vis absorption spectra of magnetic molecule tripyridinium bis[tetrabromidoferrate(III)] bromide with density functional formalisms [Volume 29, Issue 3, 2022, Pages 1319-1329]
  • Tian, G. Metaheuristics for a bi-objective green vendor managed inventory problem in a two-echelon supply chain network [Volume 29, Issue 2, 2022, Pages 816-837]

V

  • Vaez-Ghasemi, M. Stepwise pricing in evaluating revenue efficiency in data envelopment analysis: A case study of power plants [Volume 29, Issue 2, 2022, Pages 915-928]
  • Vaezi, E. Performance measurement in the health care sector: A leader-follower network DEA model based on double frontier analysis [Volume 29, Issue 3, 2022, Pages 1662-1684]
  • Vahdani, B. A vehicle routing problem with two types of ships in container terminals [Volume 29, Issue 1, 2022, Pages 447-460]
  • Vajdi, M. Numerical investigation of circular porous fins effect on natural heat transfer enhancement in an annulus cavity [Volume 29, Issue 2, 2022, Pages 572-587]

W

  • Wang, C. Effect of the Shenzhen-Hong Kong stock connect mechanism on stock market volatility [Volume 29, Issue 1, 2022, Pages 372-386]
  • Wang, J. Analysis of loading distribution for SRB and TSRB combined bearing [Volume 29, Issue 2, 2022, Pages 478-485]
  • Wen, J. Mechanical safety analysis of the gas lift completion string used for a high-pressure sandwich layer [Volume 29, Issue 1, 2022, Pages 1-12]

Y

  • Yadav, Dharmendra Manufacturer-retailer integrated inventory model with controllable lead time and service level constraint under the effect of learning-forgetting in setup cost [Volume 29, Issue 2, 2022, Pages 800-815]
  • Yan, W. Dynamic modeling and optimal control of stone-carving robotic manipulators [Volume 29, Issue 3, 2022, Pages 1410-1426]
  • Yang, Ming Mechanical safety analysis of the gas lift completion string used for a high-pressure sandwich layer [Volume 29, Issue 1, 2022, Pages 1-12]
  • Yarar, E. Effect of Vibration Parameters on the Shot Velocity in SMAT Process Using Dynamic Finite Element Analysis [Volume 29, Issue 3, 2022, Pages 1210-1220]
  • Yazdanpanah, R. A dual-stator machine with diametrically magnetized PM: Analytical air-gap flux calculation, efficiency optimization, and comparison with conventional dual-stator machines [Volume 29, Issue 1, 2022, Pages 208-216]
  • Yazdi, M. A multi-objective two-echelon newsvendor problem with limited budget and capacity [Volume 29, Issue 1, 2022, Pages 275-289]
  • Yin, F. Dynamic modeling and optimal control of stone-carving robotic manipulators [Volume 29, Issue 3, 2022, Pages 1410-1426]

Z

  • Zabihi-Samani, M. Simulation of the force-displacement behavior of reinforced concrete beams under different degrees and locations of corrosion [Volume 29, Issue 3, 2022, Pages 964-972]
  • Zamani Kouhpanji, M. R. Designing and analyzing two non-invasive current sensors using Ampere's force law [Volume 29, Issue 1, 2022, Pages 183-192]
  • Zare, M. Fuzzy mathematical models for maximizing satisfaction of contractors and clients by considering flexible start date of the project [Volume 29, Issue 3, 2022, Pages 1729-1741]
  • Zarrati, A. R. Development of a 2D depth-averaged model for calculating scouring and deposition in alluvial streams [Volume 29, Issue 3, 2022, Pages 941-950]
  • Zeraatgar, H. Roll restoring coefficients of planing boats' maneuver using 2D + t approach [Volume 29, Issue 3, 2022, Pages 1197-1209]
  • Zhang, H. Analysis of loading distribution for SRB and TSRB combined bearing [Volume 29, Issue 2, 2022, Pages 478-485]
  • Zheng, X. Optimizing two multi-echelon inventory systems for perishable products with price and stock dependent demand in supply chain [Volume 29, Issue 1, 2022, Pages 320-342]
  • Zohour-Attar, M. Expansion planning of automated sub-transmission and distribution networks integrated by distributed generations [Volume 29, Issue 2, 2022, Pages 645-659]