References
1. Kishore, R.A., Singh, D., Sriramdas, R., et al. “Linear thermomagnetic energy harvester for low-grade thermal energy harvesting”, J. Appl. Phys, 127(4), 044501 (2020). https://doi.org/10.1063/1.5124312
2. Fan, K., Cai, M., Wang, F., et al. “A string-suspended and driven rotor for efficient ultra-low frequency mechanical energy harvesting”, Energy Conversion and Management, 198, 111820 (2019). https://doi.org/10.1016/j.enconman.2019.111820
3. Farhat, M., Barambones, O., and Sbita, L. “A new maximum power point method based on a sliding mode approach for solar energy harvesting”, Applied Energy, 185, pp. 1185-1198 (2017). https://doi.org/10.1016/j.apenergy.2016.03.055
4. Yang, K., Su, K., Wang, J., et al. “Piezoelectric wind energy harvesting subjected to the conjunction of vortex-induced vibration and galloping: comprehensive parametric study and optimization”, Smart Mater. Struct., 29(7), 075035 (2020).
https://doi.org/10.1088/1361-665X/ab870e
5. Liu, X., Qiu, J., Chen, H., et al. “Design and optimization of an electromagnetic vibration energy harvester using dual halbach arrays”, IEEE Transactions on Magnetics, 51(11), pp. 1-4 (2015). https://doi.org/10.1109/TMAG.2015.2437892
6. Zhang, L.B., Dai, H.L., Yang, Y.W., et al. “Design of high-efficiency electromagnetic energy harvester based on a rolling magnet”, Energy Conversion and Management, 185, pp. 202-210 (2019). https://doi.org/10.1016/j.enconman.2019.01.089
7. Zhang, Y., Wang, T., Luo, A., et al., “Micro electrostatic energy harvester with both broad bandwidth and high normalized power density”, Applied Energy, 212, pp. 362-371 (2018). https://doi.org/10.1016/j.apenergy.2017.12.053
8. Liu, H., Hou, C., Lin, J., et al. “A non-resonant rotational electromagnetic energy harvester for low-frequency and irregular human motion”, Appl. Phys. Lett., 113, 203901 (2018). https://doi.org/10.1063/1.5053945
9. Zhang, Y., Zhu, H., Xu, Y., et al. “Theoretical modeling and experimental verification of rotational variable reluctance energy harvesters”, Energy Conversion and Management, 233, 113906 (2021). https://doi.org/10.1016/j.enconman.2021.113906
10. Zhang, Y., Cao, J., Liao, W., et al. “Theoretical modeling and experimental verifcation of circular Halbach electromagnetic energy harvesters for performance enhancement”, Smart Mater. Struct., 27(9), 095019 (2018). https://doi.org/10.1088/1361-665X/aad710
11. Zhang, Y., Cao, J., Zhu, H., et al. “Design, modeling and experimental verifcation of circular Halbach electromagnetic energy harvesting from bearing motion”, Energy Conversion and Management, 180, pp. 811-821 (2019). https://doi.org/10.1016/j.enconman.2018.11.037
12. Kroener, M., Ravindran, S.K.T., and Woias, P. “Variable reluctance harvester for applications in railroad monitoring”, J. Phys. Conf. Ser., 476 (2013). https://doi.org/10.1088/1742-6596/476/1/012091
13. Parthasarathy, D., Enoksson, P., and Johansson, R., “Prototype energy harvesting wheel speed sensor for anti-lock braking”, Int. Conf. ROSE, pp. 115-120 (2012). https://doi.org/10.1109/ROSE.2012.6402607
14. Xu, Y., Bader, S., and Oelmann, B. “A survey on variable reluctance energy harvesters in low-speed rotating applications”, IEEE Sensors Journal, 18(8), pp. 3426-3435 (2018). https://doi.org/10.1109/JSEN.2018.2808377
15. Paul, S., and Chang, J., “Design of novel electromagnetic energy harvester to power a deicing robot and monitoring sensors for transmission lines”, Energy Conversion and Management, 197, 111868 (2019). https://doi.org/10.1016/j.enconman.2019.111868
16. Cao, Z., Huang, Y., Guo, B., et al. “A novel hybrid analytical model of active magnetic bearing considering rotor eccentricity and local saturation effect”, IEEE Transactions on Industrial Electronics, 69(7), pp. 7151-7160 (2022). https://doi.org/10.1109/TIE.2021.3102396
17. Ghods, M. and Gorginpour, H. “Equivalent magnetic network modeling of dual-winding outer-rotor vernier permanent magnet machine considering pentagonal meshing in the air-gap”, IEEE Transactions on Industrial Electronics, 69(12), pp. 12587-12599 (2022). https://doi.org/10.1109/TIE.2021.3131796
18. Ding, W., Liang, D., and Tang, R. “A fast nonlinear variable structure equivalent magnetic circuit modeling for dual-channel switched reluctance machine”, Energy Conversion and Management, 52(1), pp. 308-320 (2011). https://doi.org/10.1016/j.enconman.2010.07.002
19. Xu, M., Liu, G., Chen, Q., et al. “Torque calculation of stator modular PMa-SynRM with asymmetric design for electric vehicles”, IEEE T. on Transport. Electrific., 7(1), pp. 202-213 (2021). https://doi.org/10.1109/TTE.2020.3007394
20. Lee, J., Lee, J., and Kim, K., “Design of a WFSM for an electric vehicle based on a nonlinear magnetic equivalent circuit”, IEEE Transactions on Applied Superconductivity, 28(3), pp. 1-4 (2018). https://doi.org/10.1109/TASC.2018.2807438
21. Ostovic, V. Dynamics of Saturated Electric Machines, Springer-Verlag (1989).
22. Rezaee-Alam, F., Nazari Marashi, A., Dehafarin, A., et al. “Analytical modelling of one cage rotor induction motor for electric submersible pumps”, IET Electr. Power Appl, 16(11), pp. 1273-1285 (2022). https://doi.org/10.1049/elp2.12223
23. Naderi, P. “Modified magnetic-equivalent-circuit approach for various faults studying in saturable double-cage-induction machines”, IET ELECTR POWER APP, 11(7), pp. 1224-1234 (2017). https://doi.org/10.1049/iet-epa.2016.0782
24. Naderi, P. “Inter-turn short-circuit fault detection in saturable squirrel-cage induction motor using magnetic equivalent circuit model”, COMPEL, 35(1), pp. 245-269 (2016). https://doi.org/10.1108/COMPEL-08-2015-0297
25. Rezaee-Alam, F., Rezaeealam, B., and Naeini, V., “An improved winding function theory for accurate modeling of small and large air-gap electric machines”, IEEE T MAG, 57(5), pp. 1-13 (2021). https://doi.org/10.1109/TMAG.2021.3064402
26. Hague, B. Electromagnetic Problems in Electrical Engineering, London, U.K.: Oxford Univ. Press (1929).
27. O’Connell, T.C. and Krein, P.T. “A Schwarz-Christoffel-based analytical method for electric machine field analysis”, IEEE Transactions on Energy Conversion, 24(3), pp. 565-577 (2009). https://doi.org/10.1109/TEC.2009.2025412
28. Asghari, B. “Geometrical permeance network based real-time nonlinear induction machine model”, PhD Thesis, University of Alberta (2011). https://doi.org/10.7939/R3B31C
)