Diffusions of nanoparticles and existence of multiple solutions for Magnetohydrodynamics Williamson nanofluid with slip mechanism

Document Type : Research Article

Authors

1 Department of Mathematics, Women University of Azad Jammu and Kashmir, Bagh, Azad Kashmir, Pakistan.

2 Department of Mathematics, College of Science, King Khalid University, Abha, Saudi Arabia.

3 Department of Computer Science, Bahria University, Islamabad Pakistan.

10.24200/sci.2024.63355.8353

Abstract

Here the concept of heat transport mechanisms and stagnation point of the MHD Williamson nanofluid have been elaborated with Brownian motion and thermophoresis diffusion past a permeable stretching/shrinking cylinder. Both the conditions of velocity slip and heat source/sink effects are considered. The shooting algorithm with Runge-Kutta-Fehlberg method has been exploited for solutions of ODEs. The effect on drag coefficient, heat and mass transport rates as well as the dimensionless velocity, temperature and concentration fields of the physical boundaries objectives of the study are graphically delineated and thoroughly discussed. As nanoparticle concentration increases at the outer surface of the boundary layer, the rising patterns of Nusselt number as well as skin friction are observed. Dual solutions with the critical value of the mass transfer parameter (0<s_c<s)and the shrinking parameter (χ_c<χ) are obtained for different related parameters in some domains and shrinking parameter. It's worth mentioning that just for the contracting scenario; there are a range of solutions. The slip factor increases the thermal transport amount at the surface of the shrinking cylinder. Here the outcomes noted the average increase of skin friction with respect to γ (curvature) factor to 24.8% with brilliant results compared with former prose....

Keywords

Main Subjects

References

References
1. Haw, M. “Einstein’s random walk”, Physics World, 18(1), pp. 19-22 (2005). https://doi.org/10.1088/2058-7058/18/1/25
2. Tyndall, J. “On haze and dust”, Proc. R. Inst., 6, pp. 1-6 (1870).
3. Choi, S.U.S. and Eastman, J.A. “Enhancing thermal conductivity of fluids with nanoparticles”, ASMEPublications- Fed, 231, pp. 99–106 (1995).
4. Buongiorno, J. “Convective transport in nanofluids”, J. Heat Transf., 128, pp. 240–250 (2006). https://doi.org/10.1115/1.2150834
5. Kuznetsov, A.V. and Nield, D.A. “The Cheng- Minkowycz problem for natural convective boundary layer flow in a porous medium saturated by a nanofluid: A revised model”, Int. J. Heat Mass Transf., 65(25-26), pp. 5792-5795 (2013). https://doi.org/10.1016/j.ijheatmasstransfer.2013.06.054
6. Khan, W. and Pop, I. “Boundary-layer flow of a nanofluid past a stretching sheet”, Int. J. Heat Mass Transf., 53 (11-12), pp. 2477–2483 (2010). https://doi.org/10.1016/j.ijheatmasstransfer.2010.01.032
7. Ibrahim, W. and Shanker, B. “Boundary layer flow and heat transfer of nanofluid over a vertical plate with convective surface boundary condition”, ASME. J. Fluids Eng., 134(8), 081203 (2012). https://doi.org/10.1115/1.4007075
8. Khan, S.U. and Khan, H.A. “Swimming of gyrotactic microorganisms in unsteady flow of Eyring Powell nanofluid with variable thermal features: Some biotechnology applications”, Int. J. Thermophysics, 41(11), 159 (2020). https://doi.org/10.1007/s10765-023-03267-2
9. Shah, F., Khan, S.A., Al-Khaled, K., Khan, M., et al. “Impact of entropy optimized Darcy-Forchheimer flow in MnZnFe2O4 and NiZnFe2O4 hybrid nanofluid towards a curved surface”, Zeitschrift für Angewandte Mathematik und Mechanik, 102(3), e202100194 (2021).https://doi.org/10.1002/zamm.202100194
10. Irfan, M., Anwar, M.S., Kebail, I., and Khan, W.A. “Thermal study on the performance of Joule heating and Sour-Dufour influence on nonlinear mixed convection radiative flow of Carreau nanofluid”, Tribology Int., 188, 108789 (2023). https://https://doi.org/10.1016/j.triboint.2023.108789
11. Khan, W.A., Anjum, N., Hobiny A., and ALi, M. “Entropy generation analysis for chemically reactive flow of Sutterby nanofluid considering radiation aspects”, Scientia Iranica, 31(12), pp. 935–944 (2023). https://doi.org/10.24200/sci.2023.60105.6594
12. Raza, A., Al-Khaled, K., Muhammad, T., and Khan, S.U. “Accelerating flow of carbon nanotubes with carboxymethyl cellulose and blood base materials with comparative thermal features: Prabhakar fractional model”, Mathematical Prob. Eng., 2023, 3468295 (2023). https://doi.org/10.1155/2023/3468295
13. Manigandan, A. and Narayana, P.V.S. “Influence of variable thermal conductivity and mixed convection on hybrid nanofluid (SWCNT + MWCNT/H2O) flow over an exponentially elongated sheet with slip conditions”, Indian J. Phy., 49, pp. 1401–1414 (2023). https://doi.org/10.1007/s12648-023-02912-8 
14. Guedri, K., Hashmi, M.S. et al. “Numerical simulation for two-phase dusty thermally developed Marangoni forced convective flow of Williamson material: A finite difference scheme”, Zeitschrift für Angewandte Mathematik und Mechanik, 103(3) (2022). https://doi.org/10.1002/zamm.202100206
15. Irfan, M. “Energy transport phenomenon via Joule heating and aspects of Arrhenius activation energy in Maxwell nanofluid”, Waves Random Complex Media, (2023) https://doi.org/10.1080/17455030.2023.2196348
16. Ahmad, H., Al-Khaled, K., Sowayan, A.S., et al. “Experimental investigation for automotive radiator heat transfer performance with ZnO-Al2O3/water-based hybrid nanoparticles: An improved thermal model”, Int. J. Modern Physics B., 37, 2350050 (2023). https://doi.org/10.1142/S0217979223500509
17. Crane, L.J. “Boundary layer flow due to a stretching cylinder”, ZAMP, 26, pp. 619–622 (1975). https://doi.org/10.1007/BF01594034
18. Wang, C.Y. “Fluid flow due to a stretching cylinder”, Phys. Fluids, 31, pp. 466–468 (1988). https://doi.org/10.1063/1.866827
19. Lok, Y.Y. and Pop, I. “Wang's shrinking cylinder problem with suction near a stagnation point”, Phys. Fluids, 23, 083102 (2011). https://doi.org/10.1063/1.3624697
20. Mukhopadhyay, S. “Mixed convection boundary layer flow along a stretching cylinder in porous medium”, J. Petroleum Sci. Eng., 96, pp. 73–78 (2012). https://doi.org/10.1016/j.petrol.2012.08.006
21. Zaimi, K., Ishak, A., and Pop, I. “Unsteady flow due to a contracting cylinder in a nanofluid using Buongiorno's model”, Int. J. Heat Mass Transf., 68, pp. 509–513 (2014). https://doi.org/10.1016/j.ijheatmasstransfer.2013.09.047
22. Ishak, A. and Nazar, R. “Laminar boundary layer flow along a stretching cylinder”, Eur. J. Sci., 36, pp. 22–29 (2009).
23. Fang, T., Zhang, J., and Zhong, Y. “Note on unsteady viscous flow on the outside of an expanding or contracting cylinder”, Commun. Nonlinear Sci. Numer. Simulat., 17, pp. 3124–3128 (2012). https://doi.org/10.1016/j.cnsns.2011.12.013
24. Lok, Y.Y., Merkin, J.H., and Pop, I. “Mixed convection flow near the axisymmetric stagnation point on a stretching or shrinking cylinder”, Int. J. Thermal Sci., 59, pp. 186–194 (2012). https://doi.org/10.1016/j.ijthermalsci.2012.04.008
25. Zaimi, W.M.K.A.W., Ishaq, A., and Pop, I. “Unsteady viscous flow over a shrinking cylinder”, J. King Saud University, 25, pp. 143–148 (2013). https://doi.org/10.1016/j.jksus.2012.11.005
26. Abbas, Z., Rasool, S., and Rashidi, M.M. “Heat transfer analysis due to an unsteady stretching/shrinking cylinder with partial slip condition and suction”, Ain Shams Emng. J., 6, pp. 939-945 (2015). https://doi.org/10.1016/j.asej.2015.01.004
27. Dhanai, R., Rana, P., and Kumar, L. “MHD mixed convection nanofluid flow and heat transfer over an inclined cylinder due to velocity and thermal slip effects: Buongiorno's model”, Powd. Tech., 288, pp. 140–150 (2016). https://doi.org/10.1016/j.powtec.2015.11.004
28. Majeed, A., Javed, T., and Mustafa, I. “Heat transfer analysis of boundary layer flow over hyperbolic stretching cylinder”, Alex. Eng. J., 55, pp. 1333–1339 (2016). https://doi.org/10.1016/j.aej.2016.04.028
29. Hamid, A., Hashim and Khan, M. “Impacts of binary chemical reaction with activation energy on unsteady flow of magneto-Williamson nanofluid”, J. Mol. Liq., 262, pp. 435–442 (2018). https://doi.org/10.1016/j.molliq.2018.04.095
30. Hashim and Khan, M. “Critical values in flow patterns of Magneto-Carreau fluid over a circular cylinder with diffusion species: Multiple solutions”, J. Taiwan Inst. Chem. Eng., 77, pp. 282–292 (2017). https://doi.org/10.1016/j.jtice.2017.04.047
31. Khan, M., Irfan, M., Ahmad, L., and Khan, W.A. “Simultaneous investigation of MHD and convective phenomena on time-dependent flow of Carreau nanofluid with variable properties: Dual solutions”, Phy. Let. A., 382, pp. 2334–2342 (2018). https://doi.org/10.1016/j.physleta.2018.05.033
32. Irfan, M., Khan, M., Khan, W.A., and Ahmad, L. “Influence of binary chemical reaction with Arrhenius activation energy in MHD nonlinear radiative flow of unsteady Carreau nanofluid: dual solutions”, Appl Phy. A., 125 (2019). https://doi.org/10.1007/s00339-019-2457-4
33. Shamshuddin, M.D., Mabood, F., and Salawu, S.O. “Flow of three-dimensional radiative Williamson fluid over an inclined stretching sheet with Hall current and nth-order chemical reaction”, Heat Transf., 50(6), pp. 5400–5417 (2021). https://doi.org/10.1002/htj.22130
34. Humane, P.P., Patil, V.S., Patil, A.B., et al. “Dynamics of multiple slip boundaries effect on MHD Casson-Williamson double-diffusive nanofluid flow past an inclined magnetic stretching sheet”, Proceedings Ins. Mech. Eng. Part E.: J. Process Mech. Eng., 236(5) (2022). https://doi.org/10.1177/09544089221078153
35. Tabrez, M., Khan, W.A., Irfan, M., et al. “Analysis of oxytactic microorganisms and magnetic dipole for radiative cross fluid flow configured by nano-enhanced phase materials”, Scientia Iranica, (2023). https://doi.org/10.24200/SCI.2023.60843.7018
36. Shamshuddin, M.D., Saeed, A., Mishra, S.R., et al. “Homotopic simulation of MHD bioconvective flow of water-based hybrid nanofluid over a thermal convective exponential stretching surface”, Int. J. Numer. Methods for Heat Fluid Flow, 34(1), pp. 31–53 (2023). https://doi.org/10.1108/HFF-03-2023-0128
37. Anwar, M.S., Muhammad, T., Khan, M., et al. “MHD nanofluid flow through Darcy medium with thermal radiation and heat source”, Int. J. Modern Phy. B., 38(28), 2450386 (2023). https://doi.org/10.1142/S0217979224503867
38. Irfan, M. and Muhammad, T. “Computational framework of MHD radiative heat transfer to Carreau nanofluid with Soret-Dufour effects and activation energy”, J. Appl. Math. Mechanics, Zeitschrift für Angewandte Mathematik und Mechanik, 104(3), e202300410 (2023). https://doi.org/10.1002/zamm.202300410
39. Shamshuddin, M.D., Salawu, S.O., Shahzad, F., et al. “Thermal examination of chemical interaction and thermophoretic diffusion of Williamson fluid flow across Riga Plate surface with nonlinearity radiation flux”, Numer. Heat Transf. Part A: Applications, 85(23) (2023). https://doi.org/10.1080/10407782.2023.2251092
40. Ali, U., Irfan, M., Akbar, N.S., et al. “Dynamics of Soret–Dufour effects and thermal aspects of Joule heating in multiple slips Casson–Williamson nanofluid”, Int. J. Modern Physics B., 38(16), 24502060 (2023). https://doi.org/10.1142/S0217979224502060
41. Usman, Shaheen, S., Arain, M.B., et al. “A case study of heat transmission in a Williamson fluid flow through a ciliated porous channel: A semi-numerical approach”, Case Stud. Ther. Eng., 41 (2023). https://doi.org/10.1016/j.csite.2022.102523
42. Hamid, A., Hashim and Khan, M. “Impacts of binary chemical reaction with activation energy on unsteady flow of magneto-Williamson nanofluid”, J. Mol. Liq., 262, pp. 435-442 (2018). https://doi.org/10.1016/j.molliq.2018.04.095
43. Song, Y.Q., Hamid, A., Sun, T.C., et al. “Unsteady mixed convection flow of magneto-Williamson nanofluid due to stretched cylinder with significant non-uniform heat source/sink features”, Alexandria Eng. J., 61, pp. 195–206 (2022). https://doi.org/10.1016/j.aej.2021.04.089
44. Khan, M., Hamid, A., and Hashim, “Effects of Thermal Radiation and Slip Mechanism on Mixed Convection Flow of Williamson Nanofluid Over an Inclined Stretching Cylinder”, Commun. Theor. Phys., 71, 1405 (2019). https://doi.org/10.1088/0253-6102/71/12/1405
45. Mat, N.A.A., Arifin, N.M., Nazar, R., and Bachok, N. “Boundary layer stagnation-point flow and heat transfer towards a shrinking/stretching cylinder over a permeable surface”, Appl. Math., 6(3), pp. 466–475 (2015). https://doi.org/10.4236/am.2015.63044
46. Omar, N.S., Bachok, N., and Arifin, N.M. “Stagnation point flow over a stretching or shrinking cylinder in a copper-water nanofluid”, Int. J. Sci. Tech., 8 (2015). https://doi.org/10.17485/ijst/2015/v8i31/85405
Scientia Iranica
Volume 32, Issue 13
Transactions on Nanotechnology
July and August 2025 Article ID:8353

Files

History

  • Receive Date: 18 October 2023
  • Revise Date: 19 January 2024
  • Accept Date: 18 August 2024

Share

How to cite

Statistics