References
1.Khan, Z.H., Khan, W.A., Haq R.U., et al. “Effects of volume fraction on water-based carbon nanotubes flow in a right-angle trapezoidal cavity: FEM based analysis”, Int. Commun. Heat Mass Tran, 116, 104640 (2020). https://doi.org/10.1016/j.icheatmasstransfer.2020.104640
2.Kimura, S. and Bejan, A. “The `Heatline’ visualization of convective heat transfer”, J. Heat Transfer, 105(4), pp. 916-919 (1983). https://doi.org/10.1115/1.3245684
3.Esfe, M.H., Rostamian, H., Toghraie, D., et al. “Numerical study of heat transfer of U-shaped enclosure containing nanofluids in a porous medium using two-phase mixture method”, Case Studies in Thermal Engineering, 38, 102150 (2022). https://doi.org/10.1016/j.csite.2022.102150
4.El-Shorbagy, M.A., Eslami, F., Ibrahim, M., et al. “Numerical investigation of mixed convection of nanofluid flow in a trapezoidal channel with different aspect ratios in the presence of porous medium”, Case Stud. Therm. Eng, 25, 100977 (2021). https://doi.org/10.1016/j.csite.2021.100977
5.Van Doormaal, P.J. and Raithby, G.D. “Enhancements of the SIMPLEC method for predicting incompressible fluid flows”, Numerical Heat Transfer, 7, pp. 147-163 (1983). https://doi.org/10.1080/01495728408961817
6.Bedram, A. “A novel method (a tube with successive increase and reduction in diameter) to increase nanofluid heat transfer in a tube”, Scintia Iranica, 31, pp. 1030-1042 (2023). https://doi.org/10.24200/sci.2023.60676.6935
7.Khan, A.Z.M., Aziz, M., and Wijayanta, T.A. “Prediction of heat transfer enhancement of delta-wing tape inserts using artificial neural network”, Case Studies in Thermal Engineering, 27, 101322 (2021). https://doi.org/10.1016/j.csite.2021.101322
8.Irene, K., Kristiawan, B., Enoki, K., et al. “Impact of nanoparticles loading to a novel hybrid TiO2-CNTs/water nanofluid on thermal performance enhancement”, Numerical Heat Transfer, Part A: Applications, 85, pp. 4095-4113 (2024). https://doi.org/10.1080/10407782.2023.2251097
9.Sutanto, B., Kristiawan, B., Yaningsih, I., et al. “Numerical approach of TiO2 and CNT nanofluids flowing in circular, rectangular, and triangular tubes”, AIP Conference Proceedings, 2674(1), 030067 (2023). https://doi.org/10.1063/5.0114128
10.Boroomandpour, A., Toghraie, D., and Hashemian, D. “A comprehensive experimental investigation of thermal conductivity of a ternary hybrid nanofluid containing MWCNTs- titania-zinc oxide/water-ethylene glycol (80:20) as well as binary and mono nanofluids”, Synthetic Metals, 268, 116501 (2020). https://doi.org/10.1016/j.synthmet.2020.116501
11.Yan, R.S., Toghraie, D., Abdulkareem, A.L., et al. “The rheological behavior of MWCNTs-ZnO/Water–Ethylene glycol hybrid non-Newtonian nanofluid by using of an experimental investigation”, Journal of Materials Research and Technology, 9(4), pp. 8401-8406 (2020). https://doi.org/10.1016/j.jmrt.2020.05.018
12.Tian, S., Arshad, I.N., Toghraie, D., et al. “Using perceptron feed-forward Artificial Neural Network (ANN) for predicting the thermal conductivity of graphene oxide-Al2O3/water-ethylene glycol hybrid nanofluid”, Case Studies in Thermal Engineering, 26, 101055 (2021). https://doi.org/10.1016/j.csite.2021.101055
13.Promvonge, P., Eiamsamard, S., Wongcharee, K., et al. “Characterization of heat transfer and artificial neural networks prediction on overall performance index of a channel installed with arc-shaped baffle turbulators”, Case Stud Therm Eng, 26, 101067 (2021). https://doi.org/10.1016/j.csite.2021.101067
14.Eiamsam-ard, S., Suksangpanomrung, A., and Promthaisong, P. “Enhanced heat transfer mechanism and flow topology of a channel contained with semi-circular hinged V-shaped baffles”, Int. J. Therm. Sci., 177, 107577 (2022). https://doi.org/10.1016/j.ijthermalsci.2022.107577
15.Wijayanta, T.A., Yaningsih, I., Juwana, E.W., et al. “Effect of wing-pitch ratio of double-sided delta-wing tape insert on the improvement of convective heat transfer”, International Journal of Thermal Sciences, 151, 106261 (2020). https://doi.org/10.1016/j.ijthermalsci.2020.106261
16.Wijayanta, T.A., Yaningsih, I., Juwana, E.W., et al. “Double-sided delta-wing tape inserts to enhance convective heat transfer and fluid flow characteristics of a double-pipe heat exchanger”, Applied Thermal Engineering,145, pp. 27-37 (2018). https://doi.org/10.1016/j.applthermaleng.2018.09.009
17.Yaningsih, I., Wijayanta, T.A., Miyazaki, T., et al. “Thermal hydraulic characteristics of turbulent single-phase flow in an enhanced tube using louvered strip insert with various slant angles”, International Journal of Thermal Sciences, 134, pp. 355-362 (2018). https://doi.org/10.1016/j.ijthermalsci.2018.08.025
18.Kristiawan, B., Enoki, K., Juwana, E.W., et al. “Simulation-based assessment of the thermal-hydraulic performance of titania-based nanofluids in a circular-mini-channel tube”, International Journal of Ambient Energy, 43(1), pp. 8022-8035 (2022). https://doi.org/10.1080/01430750.2022.2085797
19.Kristiawan, B., Wijayanta, T.A., Enoki, K., et al. “Heat transfer enhancement of TiO2/water nanofluids flowing Inside a square mini-channel with a micro-fin structure: A numerical investigation”, Energies, 12(16), 3041 (2019). https://doi.org/10.3390/en12163041
20.Kristiawan, B., Santoso, B., Wijayanta, A.T., et al. “Heat transfer enhancement of TiO2/water nanofluid at Laminar and Turbulent flows: A numerical approach for evaluating the effect of nanoparticle loadings”, Energies, 11(6), 1584 (2018).
https://doi.org/10.3390/en11061584
21.Kristiawan, B., Rifa'I, I.A., Enoki, K., et al. “Enhancing the thermal performance of TiO2/water nanofluids flowing in a helical micro-fin tube”, Powder Technology, 376, pp. 254-262 (2020). https://doi.org/10.1016/j.powtec.2020.08.020
22.Kurnia, C.J, Chaedir, B., Wijayanta, T.A., et al. “Convective heat transfer enhancement of laminar Herschel–Bulkley non-Newtonian fluid in straight and helic heat exchangers with twisted tape inserts”, Ind. Eng. Chem. Res, 61(1), pp. 814-844 (2022). https://doi.org/10.1021/acs.iecr.1c02234
23.Khodabandeh, E., Rozati, AS., Joshaghani, M., et al. “Thermal performance improvement in water nanofluid/GNP–SDBS in novel design of double-layer micro-channel heat sink with sinusoidal cavities and rectangular ribs”, Journal of Thermal Analysis and Calorimetry, 136, pp. 1333-1345 (2019). https://doi.org/10.1007/s10973-018-7826-2
24.Gholami, M.R., Akbari, A.O., Marzban, A., et al. “The effect of rib shape on the behavior of laminar flow of oil/MWCNT nanofluid in a rectangular micro-channel”, J. Therm Anal Calorim, 134, pp. 1611-1628 (2018). https://doi.org/10.1007/s10973-017-6902-3
25.Parsaiemehr, M., Pourfattah, F., Ali Akbari, O., et al. “Turbulent flow and heat transfer of Water/Al2O3 nanofluid inside a rectangular ribbed channel”, Physica E, 96, pp. 73-84 (2018). https://doi.org/10.1016/j.physe.2017.10.012
26.Ali, M.M., Rushd, S., Akhter, R., et al. “Magneto-hydrodynamic mixed convective heat transfer in a nanofluid filled wavy conduit having rotating cylinders”, Scientia Iranica, Transactions on Mechanical Engineering (B), 29(2), pp. 486-501 (2022).
https://doi.org/10.24200/SCI.2021.56422.4717
27.Farajollahi, A., Mokhtari, A., Rostami, M., et al. “Numerical study of using perforated conical turbulators and added nanoparticles to enhance heat transfer performance in heat exchangers”, Scientia Iranica, 30(3), pp. 1027-1038 (2022). https://doi.org/10.24200/sci.2022.59717.6394
28.Ali Akbari, O., Toghraie, D., and Karimipour, A. “Numerical simulation of heat transfer and turbulent flow of water nano fluids copper oxide in rectangular micro-channel with semi attached rib”, Adv Mech Eng, 8, pp. 1-25 (2016). https://doi.org/10.1177/1687814016641016
29.Behnampour, A., Akbari, A.O., Safaei, M.R., et al. “Analysis of heat transfer and nanofluid fluid flow in micro channels with trapezoidal, rectangular and triangular shaped ribs”, Phys E, 91, pp. 15-31 (2017). https://doi.org/10.1016/j.physe.2017.04.006
30.Mahdy, A. “Unsteady mixed convection boundary layer flow and heat transfer of nanofluids due to stretching sheet”, Nucl. Eng. Des, 249, pp. 248-255 (2012). https://doi.org/10.1016/j.nucengdes.2012.03.025
31.de Brujin, H. “The viscosity of suspensions of spherical particles”, Recueil des Travaux Chimiques des Pays-Bas, 61(12), pp. 863-874 (1942). https://doi.org/10.1002/recl.19420611205
32.Patel, H.E., Sundararajan, T., Pradeep, T., et al. “A micro-convection model for thermal conductivity of nanofluids”, Pramana J. Phys, 65, pp. 863-869 (2005). https://doi.org/10.1007/BF02704086
33.Leonard, P.B. “A stable and accurate convective modeling procedure based on quadratic upstream interpolation”, Comput. Methods Appl. Mech. Eng, 19, pp. 59-98 (1979). https://doi.org/10.1016/0045-7825(79)90034-3
34.Ahmed, H.F., Kamel, A., and Jawad, S.A. “Experimental determination of the optimal location and contraction of sedimentation tank baffles”, Water, Air, and Soil Pollution, 92, pp. 251-271 (1996). https://doi.org/10.1007/BF00283562
)