References
1.Askari, N. and Taheri, M.H. “Numerical investigation of a MHD natural convection heat transfer flow in a square enclosure with two heaters on the bottom wall”, Karafan, 17(1), pp. 97-114 (2020). 
https://doi.org/10.48301/kssa.2020.112759
2.Manoram, R.B., Moorthy, R.S., and Ragunathan, R. “Investigation on influence of dimpled surfaces on heat transfer enhancement and friction factor in solar water heater”, J. Therm Anal Calorim, 145, pp. 541-558 (2021).  https://doi.org/10.1007/s10973-020-09746-0
3.Yadav, A.S. and Gattani, A. “Revisiting the influence of artificial roughness shapes on heat transfer enhancement”, Materials Today: Proceedings, 62(3), pp. 1383-1391 (2022). https://doi.org/10.1016/j.matpr.2021.12.254
4.Li, J., Chen, J., Chen, Y., et al. “Effectiveness of actively adjusting vapour-liquid in the evaporator for heat transfer enhancement”, Applied Thermal Engineering, 200, 117696 (2022).  https://doi.org/10.1016/j.applthermaleng.2021.117696
5.Hu, Q.X., Qu, X., Peng, W., et al. “Experimental and numerical investigation of turbulent heat transfer enhancement of an intermediate heat exchanger using corrugated tubes”, International Journal of Heat and Mass Transfer, 185, 122385 (2022). https://doi.org/10.1016/j.ijheatmasstransfer.2021.122385
6.Xu, P., Zhou, T., Xing, J., et al. “Numerical investigation of heat-transfer enhancement in helically coiled spiral grooved tube heat exchanger”, Progress in Nuclear Energy, 145, 104132 (2022).  https://doi.org/10.1016/j.pnucene.2022.104132
7.Shamsi, M.R., Akbari, O.A., Marzban, A., et al. “Increasing heat transfer of non-Newtonian nanofluid in rectangular microchannel with triangular ribs”, Physica E: Low-dimensional Systems and Nanostructures, 93, pp. 167-178 (2017). https://doi.org/10.1016/j.physe.2017.06.015
8.Alipour, H., Karimipour, A., Safaei, M.R., et al. “Influence of T-semi attached rib on turbulent flow and heat transfer parameters of a silver-water nanofluid with different volume fractions in a three-dimensional trapezoidal microchannel”, Physica E: Low-dimensional Systems and Nanostructures, 88, pp. 60-76 (2017). https://doi.org/10.1016/j.physe.2016.11.021
9.Nakhchi, M.E. “Experimental optimization of geometrical parameters on heat transfer and pressure drop inside sinusoidal wavy channels”, Thermal Science and Engineering Progress, 9, pp. 121-131 (2018). https://doi.org/10.1016/j.tsep.2018.11.006
10.Yang, L., Du, K., and Zhang, Z. “Heat transfer and flow optimization of a novel sinusoidal minitube filled with non-Newtonian SiC/EG-water nanofluids”, International Journal of Mechanical Sciences, 168, 105310 (2020). https://doi.org/10.1016/j.ijmecsci.2019.105310
11.Kumar, S., Saikia, A., Dalal A., et al. “Thermo-hydraulic transport characteristics of non-Newtonian fluid flows through corrugated channels”, International Journal of Thermal Sciences, 129, pp. 201-208 (2018). https://doi.org/10.1016/j.ijthermalsci.2018.02.005
12.Outokesh, M., Moosavi, S.S., Ajarostaghi, A., et al. “Numerical evaluation of the effect of utilizing twisted tape with curved profile as a turbulator on heat transfer enhancement in a pipe”, J. Therm Anal Calorim, 140, pp. 1537-1553 (2020). https://doi.org/10.1007/s10973-020-09336-0
13.Chu, W.X., Tsai, C.A., Lee, B.H., et al. “Experimental investigation on heat transfer enhancement with twisted tape having various V-cut configurations”, Applied Thermal Engineering, 172, 115148 (2020). https://doi.org/10.1016/j.applthermaleng.2020.115148
14.Ali Akbari, O., Toghraie, D., Karimipour, A., et al. “The effect of velocity and dimension of solid nanoparticles on heat transfer in non-Newtonian nanofluid”, Physica E: Low-dimensional Systems and Nanostructures, 86, pp. 68-75 (2017). https://doi.org/10.1016/j.physe.2016.10.013
15.Amrollahi, A., Rashidi, A.M., Lotfi, R., et al. “Convection heat transfer of functionalized MWNT in aqueous fluids in laminar and turbulent flow at the entrance region”, International Communications in Heat and Mass Transfer, 37(6), pp. 717-723 (2010). https://doi.org/10.1016/j.icheatmasstransfer.2010.03.003
16.Zeinali Heris, S., Nasr Esfahany, M., and Etemad, S.Gh. “Experimental investigation of convective heat transfer of Al2O3/water nanofluid in circular tube”, International Journal of Heat and Fluid Flow, 28(2), pp. 203-210 (2007). https://doi.org/10.1016/j.ijheatfluidflow.2006.05.001
17.Masoumnezhad, M., Kazemi, M.A., Askari, N., et al. “Semi-analytical solution of unsteady Newtonian fluid flow and heat transfer between two oscillation plate under the influence of a magnetic field”, Karafan, 18(1), pp. 35-62 (2021). https://doi.org/10.48301/kssa.2021.131037
18.Miansari, M., Aghajani, H., Zarringhalam, M., et al. “Numerical study on the effects of geometrical parameters and Reynolds number on the heat transfer behavior of carboxy-methyl cellulose/CuO non-Newtonian nanofluid inside a rectangular microchannel”, J. Therm Anal Calorim, 144, pp. 179-187 (2021).  https://doi.org/10.1007/s10973-020-09447-8
19.Khetib, Y., Alahmadi, A., Alzaed, A., et al. “Application of cylindrical fin to improve heat transfer rate in micro heat exchangers containing nanofluid under magnetic field”, Processes, 9, 1278 (2021). https://doi.org/10.3390/pr9081278
20.Abdelmalek, Z., D’Orazio, A., and Karimipour, A. “The effect of nanoparticle shape and microchannel geometry on fluid flow and heat transfer in a porous microchannel”, Symmetry, 12(4), 591 (2020). https://doi.org/10.3390/sym12040591
21.Pahlevaninejad, N., Rahimi, M., and Gorzin, M. “Thermal and hydrodynamic analysis of non-Newtonian nanofluid in wavy microchannel”, J. Therm Anal Calorim, 143, pp. 811-825 (2021). 
https://doi.org/10.1007/s10973-019-09229-x
22.Mousa, M.H., Miljkovic, N., and Nawaz, K. “Review of heat transfer enhancement techniques for single phase flows”, Renewable and Sustainable Energy Reviews, 137, 110566 (2021).  https://doi.org/10.1016/j.rser.2020.110566
23.Mashoofi Maleki, N. and Pourahmad S. “Heat transfer enhancement in a heated copper tube using the electromagnetic vibration method for nanofluids as working fluid: An experimental study”, International Communications in Heat and Mass Transfer, 141, 106566 (2023). https://doi.org/10.1016/j.icheatmasstransfer.2022.106566
24.Ma, L., Liu, X., Gao, Y., et al. “R410A and R32 condensation heat transfer and flow patterns inside horizontal micro-fin and 3-D enhanced tubes”, International Communications in Heat and Mass Transfer, 142, 106638 (2023). https://doi.org/10.1016/j.icheatmasstransfer.2023.106638
25.Yuan, M., Liu, G., Zhang, X., et al. “Heat transfer enhancement for spiral finned tubes with triangular winglets”, International Journal of Heat and Mass Transfer, 205, 123918 (2023).  https://doi.org/10.1016/j.ijheatmasstransfer.2023.123918
26.Naga Ramesh, K., Sharma, T.K., and Rao, A.P. “Latest advancements in heat transfer enhancement in the micro‑channel heat sinks: A review”, Archives of Computational Methods in Engineering, 28, pp. 3135-3165 (2021). https://doi.org/10.1007/s11831-020-09495-1
27.Akbarzadeh, S. and Valipour, M.S. “Experimental study on the heat transfer enhancement in helically corrugated tubes under the non-uniform heat flux”, J. Therm Anal Calorim, 140, pp. 1611-1623 (2020). https://doi.org/10.1007/s10973-020-09385-5
28.Nguyen, Q., Bahrami, D., Kalbasi, R., et al. “Nanofluid flow through microchannel with a triangular corrugated wall: Heat transfer enhancement against entropy generation intensification”, Mathematical Methods in the Applied Sciences, 49, pp. 5361-5374 (2020). https://doi.org/10.1002/mma.6705
29.Wang, W., Li, Y., Zhang, Y., et al. “Analysis of laminar flow and heat transfer in an interrupted microchannel heat sink with different shaped ribs”, J. Therm Anal Calorim, 140, pp. 1259-1266 (2020). https://doi.org/10.1007/s10973-019-09156-x
30.Zhang, K., Sun, Z., Zheng, N., et al. “Effects of the configuration of winglet vortex generators on turbulent heat transfer enhancement in circular tubes”, International Journal of Heat and Mass Transfer, 157, 119928 (2020). https://doi.org/10.1016/j.ijheatmasstransfer.2020.119928
31.Mehta, S.K. and Pati, S. “Analysis of thermo-hydraulic performance and entropy generation characteristics for laminar flow through triangular corrugated channel”, J. Therm Anal Calorim, 136, pp. 49-62 (2019). https://doi.org/10.1007/s10973-018-7969-1
32.Zhang, L., Yan, X., Zhang, Y., et al. “Heat transfer enhancement by streamlined winglet pair vortex generators for helical channel with rectangular cross section”, Chemical Engineering and Processing- Process Intensification, 147, 107788 (2020). https://doi.org/10.1016/j.cep.2019.107788
33.Minea, A.A. “Uncertainties in modeling thermal conductivity of laminar forced convection heat transfer with water alumina nanofluids”, International Journal of Heat and Mass Transfer, 68, pp. 78-84 (2014). https://doi.org/10.1016/j.ijheatmasstransfer.2013.09.018
34.Mukherjee, S., Jana, S., Mishra, P.C., et al. “Experimental investigation on thermo-physical properties and subcooled flow boiling performance of Al2O3/water nanofluids in a horizontal tube”, International Journal of Thermal Sciences, 159, 106581 (2021). https://doi.org/10.1016/j.ijthermalsci.2020.106581
35.Kim, D., Kwon, Y., Cho, Y., et al. “Convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions”, Current Applied Physics, 9, pp. e119-e123 (2009).  https://doi.org/10.1016/j.cap.2008.12.047