Analysis of change in the state of hydraulic drive of machines in operation according to the diagnostic results

Document Type : Article

Authors

1 Department of Track Machines, Construction Machines and Robot Systems, Russian University of Transport, 127994, 9 Obrazcova Str., Moscow, Russian Federation.

2 Department of Machine Science, Design, Standardization and Certification, Russian University of Transport, 127994, 9 Obrazcova Str., Moscow, Russian Federation.

3 Department of Non-Traction Rolling Stock, Russian University of Transport, 127994, 9 Obrazcova Str., Moscow, Russian Federation.

Abstract

Technical diagnostics is a sphere of knowledge embracing theory, methods and means for defining the technical state of the objects. It is necessary for provision of security, functional reliability and efficiency of the technical object operation, as well as for reduction of the costs for its technical maintenance and reduction of the idle time losses caused by failures and premature shutdowns for maintenance. Therefore the objective of the paper is to analyze the change in the state of hydraulic drive of machines while in operation according to the diagnostic results. In order to achieve the set objective the authors used various experimental methods. The paper considers mutual influence of maintenance and technical diagnostics of hydrostatic drives of construction, track and some other mobile machines. It is shown that introduction of technical diagnostics allows transferring from the system of planned preventive repairs to the system of servicing the machines according to their actual technical state, which allows completely using the resource of a series of expensive aggregates. The authors described several main basic characteristics of change in the volume effectiveness of the hydraulic sets while in operation.

Keywords

Main Subjects


References:
1. Kharazov, A.M. "Research and development of the ways and means for diagnostics of hydraulic drives of construction machines by the example of E-153 and E-1514 excavators", Thesis of Candidate of Technical Science, MADI, Moscow, Russian Federation, pp. 39- 43 (1972).
2. Kharazov, A.M. "Technical diagnostics of hydraulic drives of machines", Machine Engineering, 5, Moscow, pp. 79-82 (1979).
3. Birger, I.A., Technical Diagnostics, Machine Engineering, Moscow, pp. 34-36 (1978).
4. Verzakov, G.F. "Introduction into technical diagnostics",Energy, Moscow, 36, pp. 20-23 (1968).
5. Petrov, I.V. "Diagnostics of road construction machine", Transport, Moscow, 17(3), pp. 103-105 (1980).
6. Kim, B.G. "Increase in preparedness of construction eets by improving the maintenance", Thesis of Doctor of Technical Sciences, VlSU, Vladimir, Russian Federation, p. 47 (1996).
7. Terskikh, I.P. "Scientific aspects of functional diagnostics (performance) of machine-tractor aggregates", Thesis of Doctor of Technical Sciences, IRNRTU, Irkutsk, Russian Federation, pp. 54-58 (1973).
8. Alekseeva, T.V., Zagrebelniy, V.I., and Kolosov, S.V. "Technical diagnostics of hydraulic drives", Machine Engineering, Moscow, 11, p. 62 (1989).
9. Abramov, S.I. and Kharazov, A.M. "Technical diagnostics of single-bucket excavators with hydraulic drive", Stroyizdat, Moscow, 17, pp. 98-104 (1978).
10. Korzhov, V.A. "Technical diagnostics of  ying vehicles',hydraulic systems aggregates", Thesis of Candidate of Technical Sciences, Riga, Latvia, pp. 18-34 (1975).
11. Makarov, R.A. and Sokolov, A.V. "Diagnostics of construction machines", Stroyizdat, Moscow, 143, pp. 77-89 (1984).
12. Maltseva, N.A. "Improvement of maintenance of road construction machines by applying the means of technical diagnostics", Thesis of Candidate of Technical Sciences, OmSTU, Omsk, Russian Federation, pp. 15-19 (1980).
13. Morozova, S.S. "Development and introduction of method for predicting reliability of construction machines based on the analysis results of engine oils and hydraulic liquids", Thesis Abstract of Candidate of Technical Sciences, Center for Transport Technology Ltd, Moscow, pp. 34-39 (1984).
14. Pavlov, A.I. "Substantiation and development of the methods and means for diagnosis of the timber harvesting machines' hydro system elements", Thesis of Candidate of Technical Sciences, SPbPU, Leningrad, pp. 83-86 (1982). 
15. Ponomarenko, Y.F. "Hydraulic drives testing", Machine Engineering, Moscow, pp. 69-78 (1969).
16. Sidorov, V.N. "Research of the cross functional excavators' hydraulic drives diagnostic processes", Thesis of Candidate of Technical Sciences, SPbPU, Leningrad, Russian Federation, pp. 61-63 (1980).
17. Shumeyko, S.V. "Research and development of the methods and devices for diagnostics of the powered roof supports' hydraulic drives technical state", Thesis of Candidate of Technical Sciences, MADI, Moscow, Russian Federation, pp. 46-54 (1985).
18. Bagin, S.B., Development and Creation of Single- Bucket Excavator's Hydraulic Drive Diagnostics System, SPbPU, Leningrad, pp. 18-31 (1987).
19. Nikitin, O.F., Reliability, Diagnostics and Operation of Mobile Objects' Hydraulic Drive: Lecture Course with Problems Solution, Bauman MSTU Publishing Office,Moscow, pp. 27-34 (2007).
20. Baryshev, V.I., Reliability and Diagnostics of Hydraulic Drive: Study Guid, SUSU Publishing Office, Chelyabinsk, pp. 125-137 (2003).
21. Grinchar, N.G. "Reliability of hydraulic drives of construction, track and carrying and lifting machines", In Study Guide for Universities, SMC RRT, Moscow, pp. 248-254 (2007).
22. Karakulev, A.V., Ilyin, M.E., and Markedanets, O.V."Exploitation of construction, track and carrying and lifting machines", Transport, Moscow, 27(10), pp. 18- 27 (1991).
23. Alexandrova, T.A., Gorlenkov, D.V., and Romanova, N.A. "Researching of influence of tungsten, silicon and impurities oxidation on electrolytic dissolution of Cu- Zn and Fe-Ni-CO anodes", Periodico Tch^e Quimica,14(28), pp. 9-17 (2017).