<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Sharif University of Technology</PublisherName>
				<JournalTitle>Scientia Iranica</JournalTitle>
				<Issn>1026-3098</Issn>
				<Volume>29</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>An efficient synthesis of pyrimido[4,5-b]quinoline and indenopyrido[2,3-d]pyrimidine derivatives in the presence of Fe3O4@nano-cellulose/Sb (V) as a bio-based magnetic nano-catalyst</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1301</FirstPage>
			<LastPage>1307</LastPage>
			<ELocationID EIdType="pii">22481</ELocationID>
			
<ELocationID EIdType="doi">10.24200/sci.2021.56414.4712</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>S. S.</FirstName>
					<LastName>Hoseinikhah</LastName>
<Affiliation>Department of Chemistry, College of Science, Yazd University, Yazd, P.O. Box 89195-741, Iran</Affiliation>

</Author>
<Author>
					<FirstName>B. F.</FirstName>
					<LastName>Mirjalili</LastName>
<Affiliation>Department of Chemistry, College of Science, Yazd University, Yazd, P.O. Box 89195-741, Iran</Affiliation>

</Author>
<Author>
					<FirstName>N.</FirstName>
					<LastName>Salehi</LastName>
<Affiliation>Department of Chemistry, College of Science, Yazd University, Yazd, P.O. Box 89195-741, Iran</Affiliation>

</Author>
<Author>
					<FirstName>A.</FirstName>
					<LastName>Bamoniri</LastName>
<Affiliation>Department of Organic Chemistry, Faculty of Chemistry, University of Kashan, Kashan, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>07</Month>
					<Day>14</Day>
				</PubDate>
			</History>
		    <Abstract>In this study, an eco-friendly approach has been introduced for the synthesis of pyrimido[4,5-b]quinolones and indenopyrido[2,3-d]pyrimidines. This synthesis was done via a three component coupling of 6-amino-2-(methylthio)pyrimidin-4(3H)-one, 1,3-indanedione/dimedone and aromatic aldehydes using Fe3O4@nano-cellulose/Sb(V) as catalyst under solvent-free condition at 70 °C by electrical mortar-heater. The catalyst was separated from the reaction mixture by an external magnet and reused for subsequent reactions. The present procedure offers many advantages such as high yield, easy work-up, simple isolation of catalyst by external magnet and high reusability of the it. The structure of the obtained pyrimido[4,5-b]quinolones and indenopyrido[2,3-d]pyrimidines products were studied by FT-IR, 1H-NMR and 13C-NMR spectroscopic data.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Fe3O4@nano-cellulose/Sb(V)</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Bio-based catalyst</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Pyrimido[4,5-b]quinoline, Indenopyrido[2,3-d]pyrimidine</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Solvent-free</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Multi component reaction</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://scientiairanica.sharif.edu/article_22481_8dfbe1c109fb458f4a3a8b69bf847d95.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Sharif University of Technology</PublisherName>
				<JournalTitle>Scientia Iranica</JournalTitle>
				<Issn>1026-3098</Issn>
				<Volume>29</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Simultaneous spectrofluorometric analysis of caffeic and ellagic acids through inclusion complex formation with γ-Cyclodextrin</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1308</FirstPage>
			<LastPage>1318</LastPage>
			<ELocationID EIdType="pii">22586</ELocationID>
			
<ELocationID EIdType="doi">10.24200/sci.2021.56575.4795</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Abedi</LastName>
<Affiliation>Department of Chemical Technologies, Iranian Research Organization for Science and Technology (IROST), Tehran, P.O. Box 33535-111, Iran</Affiliation>

</Author>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Mikani</LastName>
<Affiliation>Department of Chemical Technologies, Iranian Research Organization for Science and Technology (IROST), Tehran, P.O. Box 33535-111, Iran</Affiliation>

</Author>
<Author>
					<FirstName>R.</FirstName>
					<LastName>Rahmanian</LastName>
<Affiliation>Department of Chemical Technologies, Iranian Research Organization for Science and Technology (IROST), Tehran, P.O. Box 33535-111, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>08</Month>
					<Day>08</Day>
				</PubDate>
			</History>
		    <Abstract>Fluorescence spectroscopy due to its high sensitivity continues to be of extensive attention to analytical chemists. Spectra recording at several interval times while the reaction is preceded, or at various concentrations of complexing agent, are cases of policies by which one can create second-order data by the spectrofluorometric technique. In this case, fluorescence spectra of a mixture of two caffeic acid (CA) and ellagic acid (EA) target analytes were recorded as a function of γ-cyclodextrin (γ-CD) (as an inclusion complexing agent) concentration to produce second-order data. At this point, bilinear least squares/residual bilinearization (BLLS/RBL), as a second-order calibration technique, due to its benefits of rapidity, accuracy, simplicity, suitable spectral resolution, and concentration estimation even in the presence of the unknown interference (Second-order advantage), was exploited for deconvolution of trilinear data to obtain fluorescence spectra and concentration profiles of the CA and EA as a function of γ-CD concentrations. A calibration set comprising 10 reference samples was employed to build BLLS/RBL model. The resulting model predictive ability was validated by a test set including 6 samples. The suggested model was effectively exploited to simultaneously quantify the content of CA and EA in 4 fruit juice samples.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Caffeic acid</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Ellagic acid</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">γ–cyclodextrin</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Bilinear least squares/residual bilinearization</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Second-order advantage</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Fruit juice</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://scientiairanica.sharif.edu/article_22586_477b047835877f0cb70b5a6f97a8e8d1.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Sharif University of Technology</PublisherName>
				<JournalTitle>Scientia Iranica</JournalTitle>
				<Issn>1026-3098</Issn>
				<Volume>29</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Study of UV-Vis absorption spectra of magnetic molecule tripyridinium bis[tetrabromidoferrate(III)] bromide with density functional formalisms</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1319</FirstPage>
			<LastPage>1329</LastPage>
			<ELocationID EIdType="pii">22576</ELocationID>
			
<ELocationID EIdType="doi">10.24200/sci.2021.57647.5342</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>F.</FirstName>
					<LastName>Baniasadi</LastName>
<Affiliation>Department of Physics, Shahid Beheshti University, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>M. B.</FirstName>
					<LastName>Fathi</LastName>
<Affiliation>Department of Condensed Matter, Faculty of Physics, Kharazmi University, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>M. M.</FirstName>
					<LastName>Tehranchi</LastName>
<Affiliation>Department of Physics, Shahid Beheshti University, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>V.</FirstName>
					<LastName>Amani</LastName>
<Affiliation>Department of Chemistry, Farhangian University, Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>03</Month>
					<Day>12</Day>
				</PubDate>
			</History>
		    <Abstract>The UV-Vis absorption spectra of the discrete magnetic molecules [py.H]3[FeBr4]2Br were calculated based on density functional theory with B3LYP exchange-correlation functional in acetonitrile solution. The molecule was dissolved dilutely in acetonitrile to ensure that its experimental response can be attributed to a single dispersed molecule without significant interaction to other molecules. The experimental UV-Vis absorption spectra show four typical peaks in UV region and three peaks in visible region. A number of different basis sets are employed to compare the experimental data with the theoretical absorption spectra on different levels of basis sets. The comparison of experimental data with theoretical computation shows that choosing 6-311++G** improves computational results mainly in visible region and makes little differences between results based on DFT and TDDFT in other wavelength domains, especially in UV wavelengths. The simulated results are of importance in simulating the response of these molecular magnets as a discrete asymmetric unit to applied light.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Molecular magnet</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">DFT</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">TDDFT</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">UV-Vis absorption spectra</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://scientiairanica.sharif.edu/article_22576_a5311ea250c069821a160b1badc69ab8.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Sharif University of Technology</PublisherName>
				<JournalTitle>Scientia Iranica</JournalTitle>
				<Issn>1026-3098</Issn>
				<Volume>29</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Computational exploration of charge transfer dynamics in dye sensitized SnO2 and ZnS for photocatalytic applications</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1330</FirstPage>
			<LastPage>1337</LastPage>
			<ELocationID EIdType="pii">22578</ELocationID>
			
<ELocationID EIdType="doi">10.24200/sci.2021.57976.5501</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>S.</FirstName>
					<LastName>Munir</LastName>
<Affiliation>School of Applied Sciences and Humanities, National University of Technology (NUTECH), Islamabad, Pakistan</Affiliation>

</Author>
<Author>
					<FirstName>K. B.</FirstName>
					<LastName>Akram</LastName>
<Affiliation>School of Applied Sciences and Humanities, National University of Technology (NUTECH), Islamabad, Pakistan</Affiliation>

</Author>
<Author>
					<FirstName>S.</FirstName>
					<LastName>Fatima</LastName>
<Affiliation>Department of Chemistry, Quaid-i-Azam University, 44000, Islamabad, Pakistan</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>03</Month>
					<Day>25</Day>
				</PubDate>
			</History>
		    <Abstract>A computational study of some novel charge transfer complexes, prepared by the adsorption of dyes on SnO2 and ZnS was carried out using semiempirical PM3 method. The two natural dyes, 1S,3R,4R,5R-3-(3,4-dihydroxyphenyl)acryloyloxy)-1,4,5-trihydroxycyclohexane carboxylic acid (DTC) and 2-Phenyl-4H-chromen-4-one (PHC) were adsorbed independently on to 1×1×1 SnO2 and ZnS crystals to form SnO2-DTC, SnO2‌-DTC-PHC and ZnS-DTC adsorption complexes. The theoretical electronic absorption spectra calculated via PM3 method revealed a large bathochromic shift to 958 nm and 577 nm for SnO2-DTC and SnO2-DTC-PHC, respectively, indicating the formation of charge transfer complex. Moreover, the bandgap was reduced to 1.29 and 2.15 eV as compared to 3.4 eV of pristine SnO2. Subsequently the adsorption of DTC on ZnS was accomplished and calculations were performed to determine the spectroscopic properties of the complex, where a considerable red shift was observed for ZnS-DTC as well. The semiempirical PM3 calculations evidenced stability of SnO2-DTC, SnO-DTC-PHC and ZnS-DTC as predicted from negative adsorption energy values. The positions of highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) as obtained from single point energy calculations, were concomitant with proposed photocatalytic mechanisms.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Semiconductor oxide, Dye grafting</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Co-grafting, Charge transfer complex</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://scientiairanica.sharif.edu/article_22578_8e6a4217e8a7391fdc7e89a120fe5d86.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Sharif University of Technology</PublisherName>
				<JournalTitle>Scientia Iranica</JournalTitle>
				<Issn>1026-3098</Issn>
				<Volume>29</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Copper (II) supported on a post-modified Magnetic pectin Fe3O4@Pectin~Imidazole~SO3H-Cu(II): An efficient biopolymer-based catalyst for selective oxidation of alcohols with aqueous TBHP</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1338</FirstPage>
			<LastPage>1350</LastPage>
			<ELocationID EIdType="pii">22447</ELocationID>
			
<ELocationID EIdType="doi">10.24200/sci.2021.58355.5689</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>P.</FirstName>
					<LastName>Ghamari Kargar</LastName>
<Affiliation>Department of Chemistry, Faculty of Sciences, University of Birjand, Birjand, P.O. Box 97175-615, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-6284-2874</Identifier>

</Author>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Ghasemi</LastName>
<Affiliation>Department of Chemistry, Faculty of Sciences, University of Birjand, Birjand, P.O. Box 97175-615, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Gh.</FirstName>
					<LastName>Bagherzade</LastName>
<Affiliation>Department of Chemistry, Faculty of Sciences, University of Birjand, Birjand, P.O. Box 97175-615, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2021</Year>
					<Month>05</Month>
					<Day>17</Day>
				</PubDate>
			</History>
		    <Abstract>Designing a catalyst that combines the activity, selectivity, simple recovery, and follows the green chemistry instructions is of great importance. In the present study, Fe3O4@Pectin~Imidazole~SO3H-Cu(II) was synthesized as an efficient and biopolymer-based magnetic catalyst for the oxidation of benzyl alcohols to aldehydes using tert-butyl hydroperoxide (TBHP) as an oxidant under solvent-free conditions. The catalyst was characterized using Fourier Transform Infrared Spectroscopy (FT-IR), Powder X-Ray Diffraction (XRD), Vibrating Sample Magnetometer (VSM), Field Emission scanning electron microscopy (FE-SEM), Energy dispersive spectroscopy (EDX), Transmission electron microscopy (TEM), and inductively coupled plasma (ICP) atomic emission spectroscopy. The results indicated that our catalyst was quite active in oxidizing the benzyl alcohols to their corresponding aldehydes in the presence of TBHP. The efficiency with low catalyst loading, convenient work-up, isolation of pure products, use of inexpensive metal instead of precious metals, solvent-free condition, use of eco-friendly support, and also the sustainability of catalyst up to at least 5 consecutive runs without a special drop-in activity are some of the remarkable advantages of this protocol.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">magnetic nanoparticle</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Pectin</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Copper complex</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Oxidation</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Benzyl alcohol</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://scientiairanica.sharif.edu/article_22447_f65e4b73bc7df2837d715bf283f6afa7.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Sharif University of Technology</PublisherName>
				<JournalTitle>Scientia Iranica</JournalTitle>
				<Issn>1026-3098</Issn>
				<Volume>29</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Alkali activated cedar wood as an efficient adsorbent for Pb2+ removal from aqueous solutions: Optimization, kinetic and thermodynamic study</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1351</FirstPage>
			<LastPage>1363</LastPage>
			<ELocationID EIdType="pii">22355</ELocationID>
			
<ELocationID EIdType="doi">10.24200/sci.2021.55733.4379</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>M. A.</FirstName>
					<LastName>Rahmatnia</LastName>
<Affiliation>Energy, Environment, and Nanostructure Material Research Lab, Caspian Faculty of Engineering, College of Engineering, University of Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>A.</FirstName>
					<LastName>Nouralishahi</LastName>
<Affiliation>Energy, Environment, and Nanostructure Material Research Lab, Caspian Faculty of Engineering, College of Engineering, University of Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Baheddini</LastName>
<Affiliation>Energy, Environment, and Nanostructure Material Research Lab, Caspian Faculty of Engineering, College of Engineering, University of Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>A.</FirstName>
					<LastName>Hallajisani</LastName>
<Affiliation>Energy, Environment, and Nanostructure Material Research Lab, Caspian Faculty of Engineering, College of Engineering, University of Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>04</Month>
					<Day>02</Day>
				</PubDate>
			</History>
		    <Abstract>In the present study, activated carbon prepared from cedar wood was synthesized, ‎via NaOH activation, and optimized to be used as the adsorbent for Pb2+ removal ‎from aqueous solutions in a batch process mode. The physicochemical properties ‎of the synthesized adsorbent were examined by SEM, FTIR and BET analysis. In ‎order to determine the optimum operational conditions, the effects of different ‎parameters including pH, adsorbent dosage, contact time, temperature, and initial ‎Pb2+concentration on the adsorptive performance of synthesized samples were also ‎investigated. According to the obtained results, the highest Pb2+ ion adsorption ‎capacity (971.9 mg/g) took place at the optimum operational condition of pH=4, ‎adsorbent dosage of 0.025 g/L, contact time of 60 minutes, 300 ppm of Pb2+ and ‎‎30 ℃. The results showed that among Langmuir, Freundlich, and Temkin ‎isotherms, the obtained data were fitted the best with the Freundlich model. ‎Additionally, the process of Pb2+ adsorption was consistent with the pseudo-‎second-order kinetics model, indicating that chemical adsorption was the dominant ‎mechanism of adsorption. Finally, according to the calculated thermodynamic ‎parameters, i.e., ∆H°, 〖∆S〗^° &amp; 〖∆G〗^°, Pb2+ adsorption on activated cedar ‎wood can be considered as an exothermic and spontaneous process.‎</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Cedar wood</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Adsorption Isotherm</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Activated Carbon</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Pb2+ removal</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://scientiairanica.sharif.edu/article_22355_bb599065939e9a6595b44fe628d6c31b.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Sharif University of Technology</PublisherName>
				<JournalTitle>Scientia Iranica</JournalTitle>
				<Issn>1026-3098</Issn>
				<Volume>29</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Effect of humic acid on adsorption of methylparaben from aqueous solutions onto commercially available granular activated carbons</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1364</FirstPage>
			<LastPage>1376</LastPage>
			<ELocationID EIdType="pii">22535</ELocationID>
			
<ELocationID EIdType="doi">10.24200/sci.2021.55931.4478</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>A. R.</FirstName>
					<LastName>Solaimany Nazar</LastName>
<Affiliation>Department of Chemical Engineering, University of Isfahan, Isfahan, Iran</Affiliation>

</Author>
<Author>
					<FirstName>M. B.</FirstName>
					<LastName>Kurade</LastName>
<Affiliation>Department of Earth Resources and Environmental Engineering, Hanyang University, Seoul, South Korea</Affiliation>

</Author>
<Author>
					<FirstName>M.</FirstName>
					<LastName>Ali Khan</LastName>
<Affiliation>Department of Chemistry, College of Science, King Saud University, Riyadh 11451, Saudi Arabia</Affiliation>

</Author>
<Author>
					<FirstName>B.-H.</FirstName>
					<LastName>Jeon</LastName>
<Affiliation>Department of Earth Resources and Environmental Engineering, Hanyang University, Seoul, South Korea</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>05</Month>
					<Day>10</Day>
				</PubDate>
			</History>
		    <Abstract>The adsorption of methylparaben (MP) on Calgon carbon (F400) and Norit-type granular activated carbons (GACs) from aqueous solutions was examined. The influence of humic acid (HA) on adsorption of MP under different pH conditions was evaluated. The adsorption isotherm results are well described by Freundlich model. The MP adsorption capacity on F400 and Norit GACs was found to be of 150 mg/g. In the presence of 2.357 mg/L HA total organic carbon (TOC), the maximum MP adsorption capacity on F400 GAC at pH 7 was increased to 2.2 folds. The Norit-type GAC had a comparatively higher uptake capacity of MP than F400 GAC. The key mechanism for MP adsorption onto the F400 GAC was through the hydrogen interaction between –OH functional group of the MP molecules. The MP adsorption capacity on Norit GAC was increased from 5 to 100 mg/g at pH 7.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Humic acid</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Methyl paraben</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Adsorption</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">F400 GAC</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">and Norit GAC</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://scientiairanica.sharif.edu/article_22535_9b4a083fe5045386621ccbf6bb01abcb.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Sharif University of Technology</PublisherName>
				<JournalTitle>Scientia Iranica</JournalTitle>
				<Issn>1026-3098</Issn>
				<Volume>29</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Sensitivity analysis of electromagnetic stimulation of oil wells using simulation technique and Box-Behnken design</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1377</FirstPage>
			<LastPage>1390</LastPage>
			<ELocationID EIdType="pii">22671</ELocationID>
			
<ELocationID EIdType="doi">10.24200/sci.2022.56072.4537</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>S.</FirstName>
					<LastName>Karami</LastName>
<Affiliation>Department of Petroleum Engineering, Faculty of Chemical Engineering, Tarbiat Modares University, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>A. H.</FirstName>
					<LastName>Saeedi Dehaghani</LastName>
<Affiliation>Department of Petroleum Engineering, Faculty of Chemical Engineering, Tarbiat Modares University, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-2721-6608</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>05</Month>
					<Day>30</Day>
				</PubDate>
			</History>
		    <Abstract>This research aims to investigate the parameters affecting the electromagnetic (EM) stimulation of an oil well. To hit the target, the CST simulator and Box-Behnken were implemented to find the sensitivity of the EM stimulation regarding rock and fluid properties. Seven factors of the frequency, brine water salinity, water saturation, oil dielectric constant, rock dielectric constant, porosity, and initial temperature were analyzed by employing 62 simulation runs. The dielectric constants of brine water were obtained using the Stogryn model as a function of brine salinity, frequency, and initial temperature. Based on the distance far from the wellbore, the wellbore region was divided into four sections of 5-6, 6-10, 10-20, and 20-100cm. The most affecting parameter in the domain of 5-20 cm is the brine salinity. The frequency and water saturation were obtained as the next affecting parameters, respectively. The most affecting parameter in the section of 20-100 cm is the frequency. In the section of the 20-10cm, the second and third affecting parameters were found to be the brine water salinity and water saturation, respectively. The highest power loss density at the 5-6cm obtained 4300 watts/m3 while the highest density was almost 1 watt/m3 at the section of 20-100 cm.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Electromagnetic wave</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Brine water</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">frequency</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Salinity</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Box-Behnken</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">dielectric constant</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://scientiairanica.sharif.edu/article_22671_690875cea78285fe8770082c6d35d04f.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Sharif University of Technology</PublisherName>
				<JournalTitle>Scientia Iranica</JournalTitle>
				<Issn>1026-3098</Issn>
				<Volume>29</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Investigation of operational parameters in the separation factor of praseodymium and neodymium from model NdFeB magnet-leaching solution in the solvent extraction: Optimization by response surface methodology</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1391</FirstPage>
			<LastPage>1409</LastPage>
			<ELocationID EIdType="pii">22626</ELocationID>
			
<ELocationID EIdType="doi">10.24200/sci.2022.56208.4601</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>H.</FirstName>
					<LastName>Gorzin</LastName>
<Affiliation>School of Chemical, Petroleum and Gas Engineering, Iran University of Science and Technology, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0003-0390-4083</Identifier>

</Author>
<Author>
					<FirstName>A.</FirstName>
					<LastName>Ghaemi</LastName>
<Affiliation>School of Chemical, Petroleum and Gas Engineering, Iran University of Science and Technology, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>A.</FirstName>
					<LastName>Hemmati</LastName>
<Affiliation>School of Chemical, Petroleum and Gas Engineering, Iran University of Science and Technology, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>A.</FirstName>
					<LastName>Rahbar-Kelishami</LastName>
<Affiliation>School of Chemical, Petroleum and Gas Engineering, Iran University of Science and Technology, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>A.</FirstName>
					<LastName>Maleki</LastName>
<Affiliation>Catalysts and Organic Synthesis Research Laboratory, Department of Chemistry, Iran University of Science and Technology,
Tehran 16846{13114, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>06</Month>
					<Day>16</Day>
				</PubDate>
			</History>
		    <Abstract>In this study, the separations of praseodymium (Pr) and neodymium (Nd) from model NdFeB Magnet-leaching solution were evaluated by two different mixtures, namely Aliquat 336/toluene (system I) and Cyanex 272/kerosene (system II). The operational parameters such as Aliquat 336 concentration (0.30-0.85 mol/L), Cyanex 272 concentration (0.23-0.57 mol/L), pH (2.0-5.0), organic to aqueous phase (O/A) ratio (1-3), and ammonium nitrate (AN) concentration (2.2-5.6 mol/L) were investigated. The impact of the studied parameters on the separation factor were modeled, compared, and optimized by response surface methodology (RSM) based on the central composite design (CCD). The parameters had relatively consistent impact on the extraction efficiency and selectivity of the system I but inconsistent impact for the system II. According to the optimization results of the operational selectivity, the system I was more fitted in which the extraction efficiencies of Pr and Nd were obtained 74.8% and 61.2%, respectively, and the separation factor was 2.10. The obtained values for Aliquat 336 concentration, O/A ratio, pH, and AN concentration were 0.85 mol/L, 1, 5.0, 3.9 mol/L, respectively. Finally, the stripping of metal ions from the loaded organic phase was effectively conducted with 0.1 M hydrochloric acid solution within a contact time of 5 minutes.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Response Surface Methodology</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Praseodymium</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Neodymium</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Aliquat 336</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Cyanex 272</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Separation Factor</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://scientiairanica.sharif.edu/article_22626_3ada268dec01dab0f6434c3ef50ec89f.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Sharif University of Technology</PublisherName>
				<JournalTitle>Scientia Iranica</JournalTitle>
				<Issn>1026-3098</Issn>
				<Volume>29</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Dynamic modeling and optimal control of stone-carving robotic manipulators</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1410</FirstPage>
			<LastPage>1426</LastPage>
			<ELocationID EIdType="pii">22612</ELocationID>
			
<ELocationID EIdType="doi">10.24200/sci.2021.56702.4866</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>F.</FirstName>
					<LastName>Yin</LastName>
<Affiliation>- National &amp; Local Joint Engineering Research Center for Intelligent Manufacturing Technology of Brittle Material Products, Huaqiao University, Xiamen 361021, China
- Institute of Manufacturing Engineering, Huaqiao University, Xiamen 361021, China</Affiliation>

</Author>
<Author>
					<FirstName>W.</FirstName>
					<LastName>Yan</LastName>
<Affiliation>- National &amp; Local Joint Engineering Research Center for Intelligent Manufacturing Technology of Brittle Material Products, Huaqiao University, Xiamen 361021, China
- Institute of Manufacturing Engineering, Huaqiao University, Xiamen 361021, China</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>09</Month>
					<Day>02</Day>
				</PubDate>
			</History>
		    <Abstract>The stone-carving robotic manipulators (SCRM) find a broad range of applications due to their high efficiency, wide range of processing and strong flexibility. However, the features of strong disturbance, uncertainty and variation in the parameters make the design of SCRM control systems more complicated. This paper introduced the inverse linear quadratic (ILQ) theory into the SCRM control system. First, we deduced the dynamic equation and state-space equation of the SCRM system with the Lagrange method. Then, the ILQ theory was used to achieve the desired closed-loop poles assignment of the system. To simplify the design process and meet the requirement of practical use, the state feedback optimal control law was determined by an improved ILQ design method. The proposed control scheme has the explicit capacity to achieve the desired joint angle and joint torque control performances, with fewer external disturbances and no sensitivity to changing model parameters. The effectiveness of the proposed control scheme compared with the traditional control strategies is shown in the simulation results. Thus, the vibration of the joint torque during the manufacturing process can be greatly reduced.</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">stone-carving robotic manipulators</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Dynamic Modeling</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">inverse linear quadratic</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Joint angle/torque control</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://scientiairanica.sharif.edu/article_22612_f029b6966e347f598bde7d37a5f655b3.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>Sharif University of Technology</PublisherName>
				<JournalTitle>Scientia Iranica</JournalTitle>
				<Issn>1026-3098</Issn>
				<Volume>29</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2022</Year>
					<Month>06</Month>
					<Day>01</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Evaluating the nature of captured exhaust soot from a retort heating carbonization system</ArticleTitle>
<VernacularTitle></VernacularTitle>
			<FirstPage>1427</FirstPage>
			<LastPage>1435</LastPage>
			<ELocationID EIdType="pii">22423</ELocationID>
			
<ELocationID EIdType="doi">10.24200/sci.2021.57008.5017</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>A. G.</FirstName>
					<LastName>Adeniyi</LastName>
<Affiliation>Department of Chemical Engineering, Faculty of Engineering and Technology, University of Ilorin, Ilorin, P. M. B. 1515, Nigeria</Affiliation>

</Author>
<Author>
					<FirstName>D. V.</FirstName>
					<LastName>Onifade</LastName>
<Affiliation>Department of Chemical Engineering, Faculty of Engineering and Technology, University of Ilorin, Ilorin, P. M. B. 1515, Nigeria</Affiliation>

</Author>
<Author>
					<FirstName>J. O.</FirstName>
					<LastName>Ighalo</LastName>
<Affiliation>- Department of Chemical Engineering, Faculty of Engineering and Technology, University of Ilorin, Ilorin, P. M. B. 1515, Nigeria
- Department of Chemical Engineering, Nnamdi Azikiwe University, P. M. B. 5025, Awka, Nigeria</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2020</Year>
					<Month>10</Month>
					<Day>18</Day>
				</PubDate>
			</History>
		    <Abstract>Deeper understanding of all aspect of biomass thermochemical conversion is necessary as researchers pursue multiple avenues for energy and environmental sustainability. In this paper, the agglomerative accumulation of soot observed, captured on the inner surface of the exhaust pipe, during the operation of a top-lit updraft biomass gasification system was evaluated to understand its nature and qualities. The soot was evaluated using Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy with Energy Dispersion Spectroscopy (SEM-EDS) and Brunauer–Emmett–Teller (BET) analyses. The combustion fuels were bamboo (Bambusa vulgaris) stalk and stem of African balsam (Daniellia olivieri). FTIR analysis revealed the presence of hydroxyl, aromatic double bond, aldehyde, thyiol and carbonyl functional groups. EDS analysis revealed that the elemental carbon content of the soot was found to be 75.05% carbon with 15.13% oxygen. SEM analysis revealed that the soot has a hollow morphology and a lustrous appearance with white tiny grit grains of carbon nano-spheres. The BET analysis revealed that the specific surface area of the soot was 500 m2/g while the pore volume and pore diameter were measured to be 0.218 cc/g and 2.113 nm respectively. The material can find use in water purification purposes, and as an additive in lubricating oils</Abstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Carbonisation</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Soot</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Char</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Characterisation</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Biomass</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://scientiairanica.sharif.edu/article_22423_71f78523376fc3eb23be9316f6f6126e.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
