2019-05-23T11:58:48Z
http://scientiairanica.sharif.edu/?_action=export&rf=summon&issue=163
Scientia Iranica
Scientia Iranica
1026-3098
1026-3098
2015
22
3
A synopsis about the effect of metakaolin on the durability of Portland cement – An overview
Alaa M.
Rashad
Metakaolin (MK) produced by suitable thermal treatment of either kaolin or paper sludge. MK can be used to modify some properties of Portland cement (PC) system. Many authors studied the effects blended PC with MK on durability characteristics. The current investigation focuses on, to review, the effect of MK on the durability of blended PC. A review on resistance of abrasion, fire, freeze-thaw, seawater, chloride-ion diffusion, carbonation, acid, sulfate, chloride, corrosion, creep, shrinkage, alkali-silica reaction (ASR) and near surface is presented.This overview can be considered as a short guide for Civil Engineers.
Portland cement
Fire resistance
Freeze-thaw resistance
chloride-ion diffusion
chemical resistance
carbonation resistance
Durability
2015
06
01
579
603
http://scientiairanica.sharif.edu/article_1888_4275c00e87e752c2c1d69441d00ac885.pdf
Scientia Iranica
Scientia Iranica
1026-3098
1026-3098
2015
22
3
Nonlinear Behavior of Concrete End Diaphragms in Straight Slab-Girder Bridges
Himan
Hojat Jalali
Shervin
Maleki
The seismic behavior of concrete end diaphragms of bridges has not been studied before and there are no significant design provisions available. According to the American Association of State Highway and Transportation Officials (AASHTO), the end diaphragms being part of the seismic load path have to remain elastic under the prescribed seismic design forces, regardless of the type of bearings used. In this paper, using a three-dimensional finite element model and nonlinear time history analyses the behavior of reinforced concrete end diaphragms in straight single-span slab-girder bridges has been investigated. The results are compared to AASHTO’s design provisions. It is concluded that for slab-girder concrete bridges the concrete diaphragms remain elastic under design earthquake loading. It is also concluded that AASHTO’s recommended seismic design force for end diaphragms could be unsafe in most cases.
Bridge
Seismic analysis
Reinforced concrete
diaphragms
elastomeric bearing
2015
06
01
604
614
http://scientiairanica.sharif.edu/article_1889_5ff10acc707976d02216670833ce1e68.pdf
Scientia Iranica
Scientia Iranica
1026-3098
1026-3098
2015
22
3
Nonlinear Finite Element Analysis of Rectangular Reinforced Concrete Slabs Strengthened by Fiber Reinforced Plastics
Cindrawaty
Lesmana
Hsuan-Teh
Hu
Strengthening reinforced concrete members by bonding fiber reinforced plastics on the tension face has become viable alternative to address strength deficiency problems. This paper investigates rectangular composite slabs subjected to distributed load using Abaqus finite element software. A parametric study using appropriate constitutive models is generated to stimulate the nonlinear material behavior of reinforced concrete and FRP. The numerical analysis examines the behavior and maximum capacity of composite slabs. The paper presents the finite element analysis results for concrete slabs strengthened with FRP material. The proposed fitted equation is applicable in preliminary investigation for engineering applications.
Finite element analysis (FEA)
Reinforced concrete
Laminates
Slab
Numerical analysis
Strengthened
2015
06
01
615
628
http://scientiairanica.sharif.edu/article_1890_959120f76f5cfdea707080eac7eca855.pdf
Scientia Iranica
Scientia Iranica
1026-3098
1026-3098
2015
22
3
Pile head displacements with different cross sectional shapes under lateral loading and unloading in granular soils
Pejman
Vahabkashi
Alireza
Rahai
Piles in structures’ foundations, which are used to load transmission from main structure to bed, are generally subjected to lateral loads. In order to study the effect of concrete pile geometry on its structural behavior, several models with different shapes and dimensions were selected and analyzed assuming the nonlinear behavior for soil. The behavior of pile models were studied, evaluated, and tabulated using numerical analysis in different conditions such as: changes in pile geometry and shape and soil properties. Therefore, the displacements of piles` head situated in granular soil with different compaction levels under a lateral load were studied in loading and unloading cycles. The dissipated energy was calculated based on pile head displacements in different load steps in the first and second cycles of loading. The "performance index" is defined as the ratio of dissipated energy to the maximum pile head displacement to compare these two factors effect on different pile models' behavior concurrently. It was observed that piles with rectangular cross sections and smaller width, have the maximum dissipation of energy and the minimum displacement occurs in dense soil.
Soil–pile interaction
Lateral load
Loading and unloading
Pile head displacements
Cross sectional shapes
Dissipated Energy
2015
06
01
629
638
http://scientiairanica.sharif.edu/article_1891_a928078ada8298de67c4e748a3437877.pdf
Scientia Iranica
Scientia Iranica
1026-3098
1026-3098
2015
22
3
Development of Nonlinear Transfer Matrix Method for Inelastic Analyses of Beams
Minho
Kwon
Minho
Kwon
Jinsup
Kim
Jinsup
Kim
Hyunsu
Seo
Suchart
Limkatanyu
The objective of this study is to develop a material-nonlinear-analysis algorithm based on the transfer matrix method (TMM). This newly developed algorithm can be used to perform nonlinear analyses of continuous beam systems. The nonlinear transfer matrix is derived from the general frame stiffness matrix and the Gauss-Lobatto integration scheme is employed for numerical integration. In the TMM, the system equation has a constant number of system unknowns regardless of the total degree-of-freedom number in the structure and the system response (either linear or nonlinear). As a result, TMM can be used efficiently both for linear and nonlinear structural analyses. In this study, a secant nonlinear algorithm required in nonlinear TMM is employed due to its good compromise between the convergence rate and numerical stability. To verify accuracy and efficiency of the developed TMM, four numerical examples are selected and analyzed. The analysis results are compared with those obtained by the highly accurate flexibility-based frame model in terms of global and local responses.
Material Nonlinear
stiffness matrix
TMM (Transfer Matrix Method)
Nonlinear Analysis
Beam Model
2015
06
01
639
649
http://scientiairanica.sharif.edu/article_1892_5c0f105cfda9d22aef38db36c160080f.pdf
Scientia Iranica
Scientia Iranica
1026-3098
1026-3098
2015
22
3
Bi-Level Optimization of Resource-Constrained Multiple Project Scheduling Problems in Hydropower Station Construction under Uncertainty
Zhe
Zhang
Jiuping
Xu
Hui
Yang
Yang
Wang
The aim of this paper is to deal with the resource-constrained multiple project scheduling problems (RCMPSP), which consider the complex hierarchical organization structure and fuzzy random environment in the decision making process. A bi-level multiobjective RCMPSP model with fuzzy random coecients is presented by taking into account the strategy and process in the practical RCMPSP. In the model, the project director is considered as the leader in the upper level, who aims to minimize total tardiness penalty of all sub-projects and the consumption of resources. Meanwhile, the sub-project manager is the follower in the lower level, regards the target to minimize the duration of each sub-project. To deal with the uncertainties, the fuzzy random parameters are transformed into the trapezoidal fuzzy variables first, which are de-fuzzified by the expected value index subsequently. A multiobjective bi-level adaptive particle swarm optimization algorithm (MOBL-APSO) is designed as the solution method to solve the model. The results and analysis of a case study are presented to highlight the practicality and eciency of the proposed model and algorithm.
Bi-level Programming
fuzzy random variables
resource-constrained scheduling problem
multiple projects
multi-objective optimization
particle swarm optimization
2015
06
01
650
667
http://scientiairanica.sharif.edu/article_1893_f428d0ac21a21ce17aa9fe0c0318200e.pdf
Scientia Iranica
Scientia Iranica
1026-3098
1026-3098
2015
22
3
Integrating system dynamics and fuzzy bargaining for quantitative risk allocation in construction projects
Farnad
Nasirzadeh
Mehdi
Rouhparvar
Hamed
Mazandarani Zadeh
Mahdi
Rezaie
Quantitative approaches to risk allocation have been developed to overcome the limitation of qualitative approaches and to determine how the responsibility of risk should be shared between contracting parties. This paper integrates a system dynamics simulation scheme with fuzzy bargaining game theory for quantitative risk allocation. The behaviour of contracting parties in the quantitative risk allocation negotiation process is modelled as players' behaviour in a game. A system dynamics based model is employed to determine the contractor and client costs (players' payoffs)at different percentages of risk allocation. Having determined the players' payoffs, the common interval between the players' acceptable risk allocation percentages is determined. The bargaining process is then performed between two parties accounting for the common interval and a desirable and equitable percentage of risk allocation is determined.
Quantitative risk allocation
Bargaining game theory
system dynamics
Fuzzy logic
Negotiation
2015
06
01
668
678
http://scientiairanica.sharif.edu/article_1894_b8188ecf7ce83639dfde357bfebf822f.pdf
Scientia Iranica
Scientia Iranica
1026-3098
1026-3098
2015
22
3
Measuring wave velocity, damping and stress-strain behaviors of geo-materials using GAP-SENSOR
A.
Aghaei Araei
A.
Aghaei Araei
I.
Towhata
S.
Hashemi Tabatabaei
H.R.
Razeghi
S.
Hashemi Tabatabaei
A triaxial testing system is described for measuring the wave velocity, stiness, damping and stress-strain behavior of layered granular materials and rock specimens under impact, cyclic and monotonic loading. The system is equipped with high-frequency GAPSENSORs (GSs) in front of target plates connected on the side of a specimen surface to measure wave velocity, axial and radial deformations locally, LDTs to measure axial and radial deformations locally, and a load cell. Based on the rst arrival of compressional wave of the deformation time-histories under impact loading, the pulse velocity is evaluated. In addition, using a reduced deformation amplitude technique at dierent elevations of the specimen, damping ratio is calculated. Results indicate that measurement of the wave velocity and damping ratio using low noise level GSs is a simple, nondestructive and reproducible method. Comparing the results of small strain shear modulus and damping ratio using local axial and radial strains measured by LDTs and GSs in the cyclic loading, with those of the proposed method, the high precision of the used innovative method is conrmed. Using this system, a continuous stress-strain relation for a strain range of 0.0001% to several % can be obtained fro a single test using a single specimen.
Wave velocity
modulus
damping
Monotonic
Dacite
Mudstone
Tire chips
Toyoura
2015
06
01
679
698
http://scientiairanica.sharif.edu/article_1895_7c7861852fad58ad59e2bbd370de3c6e.pdf
Scientia Iranica
Scientia Iranica
1026-3098
1026-3098
2015
22
3
Shear-Torsion Interaction of RC Beams Strengthened with FRP Sheets
Sayed Behzad
Talaeitaba
Davood
Mostofinejad
One of the most common options for structural strengthening and rehabilitation is the use of FRP sheets for shear-torsion strengthening of reinforced concrete beams (RCBs). Their widespread use owes much to their ease of application in addition to many other advantages. The availability of technical references and construction codes today make it easy to calculate the shear and torsion capacities of strengthened beams. Practically, however, it is the combined shear and torsion rather than pure torsion that develops in beams. The present article investigates the use of FRP sheets in strengthening RC beams. For the purposes of this study, 14 RC beams were used that were classified into three different sets: one set consisted of 5 non-strengthened (plain) beams and two sets (one with 5 and the other with 4 beams) consisted of RC beams strengthened with CFRP sheets in two different strengthening patterns. The shear-torsion interaction curves were derived for them by loading the beams under a variety of eccentricities ranging from 0 (pure shear) to infinity (pure torsion). The supports were constructed with flexure and torsion rigidity. Laboratory tests revealed that the shear-torsion interaction curves for all the three sets of beams were close to straight lines.
Interaction curve
reinforced concrete beams
Combined shear-torsion
FRP sheets
Strengthening
2015
06
01
699
708
http://scientiairanica.sharif.edu/article_1896_64de19568ca0752a715726a78e3e90e6.pdf
Scientia Iranica
Scientia Iranica
1026-3098
1026-3098
2015
22
3
Extent of riprap layerwith different stone sizes around rectangular bridge piers with or without an attached collar
M.
Karimaee Tabarestani
A. R.
Zarrati
M. B.
Mashahir
E.
Mokallaf
In the present study, extent of riprap layer with different sizes around bridge piers is investigated. Rectangular piers with or without an attached protective collar aligned with the flow and skewed at different angles are tested. The optimal configurations of riprap extent for each pier condition with different sizes are determined. Experiments showed that in case of aligned rectangular pier without a collar only 8% of the area around the pier is critical and the remaining 92% area can be protected with about 60% smaller riprap stones. As the skew angle of the pier increases up to 20o, the critical area increases up to 23% of the riprap extent. In case of protected pier with collar, the collar prevents the critical region around the pier in aligned and 5o skewed pier. However, by increasing the flow attack angle up to 20o, only a small area up to 30% in the riprap extent around the collar is critical and the remaining area can be placed with 40% smaller riprap size. Finally, the design algorithm for riprap extent with different sizes is presented.
Local scour
Rectangular bridge pier
Critical region
Riprap extent
Collar
Riprap sizing
2015
06
01
709
716
http://scientiairanica.sharif.edu/article_1897_67346995878c5820efbfbf8a625b086d.pdf
Scientia Iranica
Scientia Iranica
1026-3098
1026-3098
2015
22
3
Multi objective optimization of orthogonally stiffened cylindrical shells using optimality criteria method
Ghazaleh
Eslami
Mohammad Z.
Kabir
A multi objective optimality criteria (OC) is used to obtain optimum design of metal cylindrical shells under combined external loading. The objectives are to maximize the axial and hoop stiffness and minimize the mass of stiffened cylinders subject to the constraints including functions of weight and buckling load in such a way that the stiffened shell has no increase in the weight and no decrease in the buckling load with respect to the initial unstiffened shell. The optimization process contains six design variables including shell thickness, number of circular ring stiffeners, number of longitudinal stringer stiffeners, height of ring stiffeners, width of ring stiffeners, and longitudinal stiffeners eccentricity from shell's centerline. In analytical solution, the Rayleigh–Ritz energy procedure is applied and the ring stiffeners are treated as discrete elements. The shapes of the ring and stringer stiffeners are assumed as rectangular and Z, respectively. The shell is subjected to the uniform axial and non-constant external pressure, simultaneously. The longitudinal stringers are placed in equal spacing, whereas, the rings can be placed in unequal space due to non-constant of external pressure over the cylinder length. The results show that the iteration numbers depends on the ring stiffener space states.
Multi objective optimization
Stiffened cylindrical shell
Optimality criteria
ring stiffeners
stringers stiffeners
2015
06
01
717
727
http://scientiairanica.sharif.edu/article_1898_71597b462f026dcbeecb1c0dd4b8c4a7.pdf
Scientia Iranica
Scientia Iranica
1026-3098
1026-3098
2015
22
3
A seismic slope stability probabilistic model based on Bishop's method using analytical approach
A.
Johari
S.
Mousavi
A.
Hooshmand nejad
Probabilistic seismic slope stability analysis provides a tool for considering uncertainty of the soil parameters and earthquake characteristics. In this paper, the Jointly Distributed Random Variables (JDRV) method is used as an analytical method to develop a probabilistic model of seismic slope stability based on Bishop's method. The selected stochastic parameters are internal friction angle, cohesion and unit weight of soil, which are modeled using a truncated normal probability density function (pdf) and the horizontal seismic coefficient which is considered to have a truncated exponential probability density function. Comparison of the probability density functions of slope safety factor with the Monte Carlo simulation (MCs) indicates superior performance of the proposed approach. However, the required time to reach the same probability of failure is greater for the MCs than the JDRV method. It is shown that internal friction angle is the most influential parameter in the slope stability analysis of finite slopes. To assess the effect of seismic loading, the slope stability reliability analysis is made based on total stresses without seismic loading and with seismic loading. As a result two probabilistic models are proposed.
Reliability
Jointly distributed random variables method
Monte Carlo simulation
Seismic slope stability
Limit equilibrium method
2015
06
01
728
741
http://scientiairanica.sharif.edu/article_1899_5597f0b014b5b80bfc2f11d556f93c5d.pdf