ORIGINAL_ARTICLE
An effective league championship algorithm for the stochastic multi-period portfolio optimization problem
The multi-period portfolio optimization models were introduced to overcome the weaknesses of the single-period models via considering a dynamic optimization system. However, due to the nonlinear nature of the problem and rapid growth of the size complexity with increasing the number of periods and scenarios, this study is devoted to developing a novel league championship algorithm (LCA) to maximize the portfolio’s mean-variance function subject to different constraints. A Vector Auto Regression model is also developed to estimate the return on risky assets in different time periods and to simulate different scenarios of the rate of return accordingly. Besides, we proved a valid upper bound of the objective function based on the idea of using surrogate relaxation of constraints. Our computational results based on sample data collected from S&P 500 and 10-year T. Bond indices indicate that the quality of portfolios, in terms of the mean-variance measure, obtained by LCA is 10 to 20 percent better than those of the commercial software. This sounds promising that our method can be a suitable tool for solving a variety of portfolio optimization problems.
https://scientiairanica.sharif.edu/article_20995_3256ff49bcf664a4181389ce9c945eab.pdf
2020-04-01
829
845
10.24200/sci.2018.20995
portfolio optimization
single and multi-period models
league championship algorithm
A.
Husseinzadeh Kashan
a.kashan@modares.ac.ir
1
Faculty of Industrial and Systems Engineering, Tarbiat Modares University, Tehran, P.O. Box 14115-111, Iran.
LEAD_AUTHOR
M.
Eyvazi
2
Faculty of Industrial and Systems Engineering, Tarbiat Modares University, Tehran, P.O. Box 14115-111, Iran.
AUTHOR
A.
Abbasi-Pooya
3
Faculty of Industrial and Systems Engineering, Tarbiat Modares University, Tehran, P.O. Box 14115-111, Iran.
AUTHOR
References:
1
1. Markowitz, H. "Portfolio selection", The Journal of Finance, 7(1), pp. 77-91 (1952).
2
2. Yoshimoto, A. "The mean-variance approach to portfolio optimization subject to transaction costs", Journal of the Operations Research Society of Japan, 39(1), pp. 99-117 (1996).
3
3. Best, M.J. and Hlouskova, J. "Portfolio selection and transactions costs", Computational Optimization and Applications, 24(1), pp. 95-116 (2003).
4
4. Liu, S., Wang, S.Y., and Qiu, W. "Mean-varianceskewness model for portfolio selection with transaction costs", International Journal of Systems Science, 34(4), pp. 255-262 (2010).
5
5. Favaretto, D. "On the existence of solutions to the quadratic mixed-integer mean-variance portfolio selection problem", European Journal of Operational Research, 176(3), pp. 1947-1960 (2007).
6
6. Mulvey, J.M. and Shetty, B. "Financial planning via multi-stage stochastic optimization", Computers & Operations Research, 31(1), pp. 1-20 (2004).
7
7. Carino, D.R., Myers, D.H., and Ziemba, W.T. "Concepts, technical issues, and uses of the Russell-Yasuda Kasai financial planning model", Operations Research, 46(4), pp. 450-462 (1998).
8
8. Ertenlice, O. and Kalayci, C.B. "A survey of swarm intelligence for portfolio optimization: Algorithms and applications", Swarm and Evolutionary Computation, 39, pp. 36-52 (2018).
9
9. Deng, G.-F., Lin, W.-T., and Lo, C.-C. "Markowitzbased portfolio selection with cardinality constraints using improved particle swarm optimization", Expert Systems with Applications, 39, pp. 4558-4566 (2012).
10
10. Woodside-Oriakhi, M., Lucas, C., and Beasley, J.E. "Heuristic algorithms for the cardinality constrained efficient frontier", European Journal of Operational Research, 213, pp. 538-550 (2011).
11
11. Baykasoglu, A., Yunusoglu, M.G., and Ozsoydan, F.B. "A GRASP based solution approach to solve cardinality constrained portfolio optimization problems", Computers & Industrial Engineering, 90, pp. 339-351 (2015).
12
12. Kalayci, C.B., Ertenlice, O., Akyer, H., and Aygoren, H. "An artificial bee colony algorithm with feasibility enforcement and infeasibility toleration procedures for cardinality constrained portfolio optimization", Expert Systems with Applications, 85, pp. 61-75 (2017).
13
13. Bradley, S.P. and Crane, D.B. "A dynamic model for bond portfolio management", Management Science, 19(2), pp. 139-151 (1972).
14
14. Kallberg, J.G. and Ziemba, W.T. "Comparison of alternative utility functions in portfolio selection problems", Management Science, 29(11), pp. 1257-1276 (1983).
15
15. Mulvey, J.M. and Vladimirou, H. "Stochastic network optimization models for investment planning", Annals of Operations Research, 20(1), pp. 187-217 (1989).
16
16. Wei, S.Z. and Ye, Z.X. "Multi-period optimization portfolio with bankruptcy control in stochastic market", Applied Mathematics and Computation, 186(1), pp. 414-425 (2007).
17
17. Bertsimas, D. and Pachamanova, D. "Robust multiperiod portfolio management in the presence of transaction costs", Computers & Operations Research, 35(1), pp. 3-17 (2008).
18
18. C akmak, U. and Ozekici, S. "Portfolio optimization in stochastic markets", Mathematical Methods of Operations Research, 63(1), pp. 151-168 (2006).
19
19. Li, D. and Ng, W.L. "Optimal dynamic portfolio selection: Multiperiod mean-variance formulation", Mathematical Finance, 10(3), pp. 387-406 (2000).
20
20. Zhu, S.S., Li, D., and Wang, S.Y. "Risk control over bankruptcy in dynamic portfolio selection: A generalized mean-variance formulation", Automatic Control, IEEE Transactions on, 49(3), pp. 447-457 (2004).
21
21. Pinar, M.C . "Robust scenario optimization based on downside-risk measure for multi-period portfolio selection", OR Spectrum, 29(2), pp. 295-309 (2007).
22
22. Zhang, W.G., Liu, Y.J., and Xu, W.J. "A possibilistic mean-semivariance-entropy model for multi-period portfolio selection with transaction costs", European Journal of Operational Research, 222(2), pp. 341-349 (2012).
23
23. Fang, Y., Lai, K.K., and Wang, S.Y. "Portfolio rebalancing model with transaction costs based on fuzzy decision theory", European Journal of Operational Research, 175(2), pp. 879-893 (2006).
24
24. Sadjadi, S.J., Seyedhosseini, S.M., and Hassanlou, K. "Fuzzy multi period portfolio selection with different rates for borrowing and lending", Applied Soft Computing, 11(4), pp. 3821-3826 (2011).
25
25. Zhang, P., and Zhang, W.G. "Multiperiod mean absolute deviation fuzzy portfolio selection model with risk control and cardinality constraints", Fuzzy Sets and Systems, 255, pp. 74-91 (2014).
26
26. Yao, H., Li, Z., and Li, D. "Multi-period meanvariance portfolio selection with stochastic interest rate and uncontrollable liability", European Journal of Operational Research, 252(3), pp. 837-851 (2016).
27
27. Berger, A.J., Glover, F., and Mulvey, J.M. "Solving global optimization problems in long-term financial planning", Statistics and Operation Research Technical Report, Princeton University (1995).
28
28. Berger, A.J. and Mulvey, J.M. "Integrative risk management for individual investors", Worldwide Asset and Liability Modeling, Cambridge University Press (1996).
29
29. Chan, M.C., Wong, C.C., Cheung, B.K.S., and Tang, G.N. "Genetic algorithms in multi-stage asset allocation system", In Systems, Man and Cybernetics, 2002 IEEE International Conference on, 3, p. 6, IEEE (October, 2002).
30
30. Sun, J., Fang, W., Wu, X., Lai, C.H., and Xu, W. "Solving the multi-stage portfolio optimization problem with a novel particle swarm optimization", Expert Systems with Applications, 38(6), pp. 6727- 6735 (2011).
31
31. Yan, W., Miao, R., and Li, S. "Multi-period semivariance portfolio selection: Model and numerical solution", Applied Mathematics and Computation, 194(1), pp. 128-134 (2007).
32
32. Zhang, X., Zhang, W., and Xiao, W. "Multi-period portfolio optimization under possibility measures", Economic Modelling, 35, pp. 401-408 (2013).
33
33. Liu, Y.J., Zhang, W.G., and Zhang, Q. "Credibilistic multi-period portfolio optimization model with bankruptcy control and affine recourse", Applied Soft Computing, 38, pp. 890-906 (2016).
34
34. Liu, J., Jin, X., Wang, T., and Yuan, Y. "Robust multi-period portfolio model based on prospect theory and ALMV-PSO algorithm", Expert Systems with Applications, 42(20), pp. 7252-7262 (2015).
35
35. Wang, B., Li, Y., and Watada, J. "Multi-period portfolio selection with dynamic risk/expected-return level under fuzzy random uncertainty", Information Sciences, 385-386, pp. 1-18 (2017).
36
36. Li, B., Zhu, Y., Sun, Y., Aw, G., and Teo, K.L. "Multiperiod portfolio selection problem under uncertain environment with bankruptcy constraint", Applied Mathematical Modelling, 56, pp. 539-550 (2018).
37
37. Zhao, Y., and Ziemba, W.T.A. "Stochastic programming model using an endogenously determined worst case risk measure for dynamic asset allocation", Mathematical Programming, 89(2), pp. 293-309 (2001).
38
38. Jacobson, H.I. "The maximum variance of restricted unimodal distributions", The Annals of Mathematical Statistics, 40(5), pp. 1746-1752 (1969).
39
39. Husseinzadeh Kashan, A. "An efficient algorithm for constrained global optimization and application to mechanical engineering design: League championship algorithm (LCA)", Computer-Aided Design, 43(12), pp. 1769-1792 (2011).
40
40. Husseinzadeh Kashan, A. "League championship algorithm: a new algorithm for numerical function optimization", In 2009 International Conference of Soft Computing and Pattern Recognition, pp. 43-48, IEEE (December, 2009).
41
41. Husseinzadeh Kashan, A. "League Championship Algorithm (LCA): An algorithm for global optimization inspired by sport championships", Applied Soft Computing, 16, pp. 171-200 (2014).
42
42. Alimoradi, M.R. and Husseinzadeh Kashan, A. "A league championship algorithm equipped with network structure and backward Q-learning for extracting stock trading rules", Applied Soft Computing, 68, pp. 478- 493 (2018).
43
43. Husseinzadeh Kashan, A., Abbasi-Pooya, A., and Karimiyan, S. "A rig-based formulation and a league championship algorithm for helicopter routing in off- shore transportation", Proceedings of the 2nd International Conference on Data Engineering and Communication Technology: ICDECT 2017, Volume 828 of Advances in Intelligent Systems and Computing (2017).
44
44. Husseinzadeh Kashan, A. "A new metaheuristic for optimization: optics inspired optimization (OIO)", Computers & Operations Research, 55, pp. 99-125 (2015).
45
45. Husseinzadeh Kashan, A. "An effective algorithm for constrained optimization based on optics inspired optimization (OIO)", Computer-Aided Design, 63, pp. 52-71 (2015).
46
ORIGINAL_ARTICLE
A solution based on fuzzy max-min approach to the bi-level programming model of energy and exiramp procurement in day-ahead market
In this paper, we focus on solving the integrated energy and flexiramp procurement problem in the day-ahead market. The problem of energy and ramp procurement could be perfectly analyzed through Stackelberg concept, because of its hierarchical nature of the decision-making process. Such a circumstance is modeled via a bi-level programming, in which suppliers act as leaders and the ISO appear as the follower. The ISO intends to minimize the energy and spinning reserve procurement cost, and the suppliers aim to maximize their profit. To solve the proposed model, a fuzzy max-min approach is applied to maximize the players’ utilities. The objectives and suppliers’ dynamic offers, determined regarding the market clearing prices, are reformulated through fuzzy utility functions. The proposed approach is an effective and simple alternative to the KKT method, especially for problems with non-convex lower-level.
https://scientiairanica.sharif.edu/article_20915_45cbec90f50a02b0188476dc115028c6.pdf
2020-04-01
846
861
10.24200/sci.2018.20915
Integrated Energy and Flexiramp Market
Bi-level Programming
Fuzzy Max-Min
Dynamic Pricing
Z.
Kaheh
1
Faculty of Industrial and Systems Engineering, Tarbiat Modares University, Tehran, Iran
AUTHOR
R.
B. Kazemzadeh
rkazem@modares.ac.ir
2
Faculty of Industrial and Systems Engineering, Tarbiat Modares University, Tehran, Iran
LEAD_AUTHOR
M.K.
Sheikh-El-Eslami
3
Faculty of Industrial and Systems Engineering, Tarbiat Modares University, Tehran, Iran
AUTHOR
References:
1
1. Milligan, M., Holttinen, H., Kiviluoma, J., Orths, A., Lynch, M.A., and Soder, L. "Market designs for high levels of variable generation", In 2014 IEEE PES General Meeting Conference & Exposition, pp. 1-5 (July 2014).
2
2. Wang, B. and Hobbs, B.F. "A flexible ramping product: Can it help real-time dispatch markets approach the stochastic dispatch ideal?", Electric Power Systems Research, 109, pp. 128-140 (2014).
3
3. Wang, B. and Hobbs, B.F. "Flexiramp market design for real-time operations: Can it approach the stochastic optimization ideal?", In Power and Energy Society General Meeting (PES), 2013 IEEE, pp. 1-5 (July 2013).
4
4. Wang, B. and Hobbs, B.F., Real-Time Markets for Flexiramp: A Stochastic Unit Commitment-Based Analysis, IEEE Transactions on Power Systems, 31(2), pp. 846-860 (2015).
5
5. Wang, B. and Hobbs, B.F. "Real-time markets for flexiramp: A stochastic unit commitment-based analysis", IEEE Transactions on Power Systems, 31(2), pp. 846-860 (2016).
6
6. California ISO. Folsom, CA, USA, "Addition of a new flexible ramping constraint in the real time pre-dispatch and real time dispatch process", Tech. Bulletin (Feb. 2011) [Online], Available at: http://www.caiso.com/2b30/2b307b2a64380.pdf.
7
7. Navid, N., Rosenwald, G., and Chatterjee, D., Ramp Capability for Load Following in the MISO Markets, Midwest Independent System Operator (2011).
8
8. Moiseeva, E., Hesamzadeh, M.R., and Biggar, D.R. "Exercise of market power on ramp rate in windintegrated power systems", Power Systems, IEEE Transactions on, 30(3), pp. 1614-1623 (2015).
9
9. Milligan, M., Frew, B., Zhou, E., and Arent, D.J. "Advancing system flexibility for high penetration renewable integration (No. NREL/TP-6A20-64864)", NREL (National Renewable Energy Laboratory) (2015).
10
10. Soares, T., Pinson, P., Jensen, T.V., and Morais, H. "Optimal offering strategies for wind power in energy and primary reserve markets", IEEE Transactions on Sustainable Energy, 7(3), pp. 1036-1045 (2016).
11
11. Riaz, S., Chapman, A.C., and Verbic, G. "Evaluation of concentrated solar-thermal generation for provision of power system flexibility", In Power Systems Computation Conference (PSCC), 2016, pp. 1-7 (June 2016).
12
12. Wu, H., Shahidehpour, M., and Khodayar, M.E. "Hourly demand response in day-ahead scheduling considering generating unit ramping cost", IEEE Transactions on Power Systems, 28(3), pp. 2446-2454 (2013).
13
13. Carrion, M., Arroyo, J.M., and Conejo, A.J. "A bilevel stochastic programming approach for retailer futures market trading", Power Systems, IEEE Transactions on, 24(3), pp. 1446-1456 (2009).
14
14. Haghighat, H. and Kennedy, S.W. "A bilevel approach to operational decision making of a distribution company in competitive environments", Power Systems, IEEE Transactions on, 27(4), pp. 1797-1807 (2012).
15
15. Shi, L., Luo, Y., and Tu, G.Y. "Bidding strategy of microgrid with consideration of uncertainty for participating in power market", International Journal of Electrical Power & Energy Systems, 59, pp. 1-13 (2014).
16
16. Khojasteh, M. and Jadid, S. "Decision-making framework for supplying electricity from distributed generation-owning retailers to price-sensitive customers", Utilities Policy, 37, pp. 1-12 (2015).
17
17. Tohidi, Y., Hesamzadeh, M.R., Baldick, R., and Biggar, D.R. "Transmission network switching for reducing market power cost in generation sector: A Nash-equilibrium approach", Electric Power Systems Research, 146, pp. 71-79 (2017).
18
18. Carrion, M., Arroyo, J.M., and Conejo, A.J. "A bilevel stochastic programming approach for retailer futures market trading", IEEE Transactions on Power Systems, 24, pp. 1446-1456 (2009).
19
19. Cheng, C.-B. "Reverse auction with buyer-supplier negotiation using bi-level distributed programming", European Journal of Operational Research, 211(3), pp. 601-611 (2011).
20
20. Chen, Y., He, L., Li, J., Cheng, X., and Lu, H. "An inexact bi-level simulation-optimization model for conjunctive regional renewable energy planning and air pollution control for electric power generation systems", Applied Energy, 183, pp. 969-983 (2016).
21
21. European Wind Energy Association, Support Schemes for Renewable Energy. A Comparative Analysis of Payment Mechanisms in the EU. Directorate-General Energy and Transport (2002).
22
22. Cheng, C.-B. "Reverse auction with buyer-supplier negotiation using bi-level distributed programming", European Journal of Operational Research, 211(3), pp. 601-611 (2011).
23
23. Pozo, D., Sauma, E., and Contreras, J. "Basic theoretical foundations and insights on bilevel models and their applications to power systems", Annals of Operations Research, 254(1-2), pp. 303-334 (2017).
24
24. Shih, H.S., Lai, Y.J., and Lee, E.S. "Fuzzy approach for multi-level programming problems", Computers & Operations Research, 23(1), pp. 73-91 (1996).
25
25. Ungureanu, V. "Taxonomy of strategic games with information leaks and corruption of simultaneity", In Pareto-Nash-Stackelberg Game and Control Theory, pp. 255-273. Springer, Cham (2018).
26
26. Nie, P.Y., Chen, L.H., and Fukushima, M. "Dynamic programming approach to discrete time dynamic feedback Stackelberg games with independent and dependent followers", European Journal of Operational Research, 169(1), pp. 310-328 (2006).
27
27. Simaan, M. and Cruz Jr, J.B. "On the Stackelberg strategy in nonzero-sum games", Journal of Optimization Theory and Applications, 11(5), pp. 533-555 (1973).
28
28. Ben-Ayed, O. and Blair, C.E. "Computational difficulties of bi level linear programming", Operations Research, 38, pp. 556-560 (1990).
29
29. Gongxian, X. and Yang, L. "Steady-state optimization of biochemical systems by bi-level programming", Computers & Chemical Engineering, 106, pp. 286-296 (2017).
30
30. Roghanian, E., Aryanezhad, M.B., and Sadjadi, S.J. "Integrating goal programming, Kuhn-Tucker conditions, and penalty function approaches to solve linear bi-level programming problems", Applied Mathematics and Computation, 195(2), pp. 585-590 (2008).
31
31. Sakawa, M. and Matsui, T. "Interactive random fuzzy two-level programming through possibility-based probability model", Information Sciences, 239, pp. 191- 200 (2013).
32
32. Hejazi, S.R., Memariani, A., Jahanshahloo, G., and Sepehri, M.M. "Linear bilevel programming solution by genetic algorithm", Computers & Operations Research, 29(13), pp. 1913-1925 (2002).
33
33. Kuo, R.J. and Huang, C.C. "Application of particle swarm optimization algorithm for solving bi-level linear programming problem", Computers & Mathematics with Applications, 58(4), pp. 678-685 (2009).
34
34. Kuo, R.J. and Han, Y.S. "A hybrid of genetic algorithm and particle swarm optimization for solving bilevel linear programming problem - A case study on supply chain model", Applied Mathematical Modelling, 35(8), pp. 3905-3917 (2011).
35
35. Kato, K., Sakawa, M., Matsui, T., and Ohtsuka, H. "A computational method for obtaining Stackelberg solutions to noncooperative two-level programming problems through evolutionary multi-agent systems", In Agent and Multi-Agent Systems: Technologies and Applications, pp. 639-648, Springer Berlin Heidelberg (2009).
36
36. Lai, Y.-J. "Hierarchical optimization: A satisfactory solution", Fuzzy Set and Systems, 77, pp. 321-335 (1996).
37
37. Soares, T., Pinson, P., Jensen, T.V., and Morais, H., Optimal Offering Strategies For Wind Power in Energy and Primary Reserve Markets, IEEE Transactions on Sustainable Energy, 7(3), pp. 1036-1045 (2016).
38
38. Bellman, R.E. and Zadeh, L.A. "Decision-making in a fuzzy environment", Management Science, 17(4), B-141 (1970).
39
39. Saranwong, S. and Likasiri, C. "Bi-level programming model for solving distribution center problem: A case study in Northern Thailand's sugarcane management", Computers & Industrial Engineering, 103, pp. 26-39 (2017).
40
40. Shih, H.S., Lai, Y.J., and Lee, E.S. "Fuzzy approach for multi-level programming problems", Computers & Operations Research, 23(1), pp. 73-91 (1996).
41
ORIGINAL_ARTICLE
The stage shop scheduling problem: lower bound and metaheuristic
Remarkable efforts are made to develop the job shop scheduling problem up to now. As a novel generalization, the stage shop can be defined as an environment, in which each job is composed of some stages and each stage may include one operation or more. A stage can be defined a subset of operations of a job, such that these operations can be done in any arbitrary relative order while the stages should be processed in a predetermined order. In other words, the operations of a stage cannot be initiated until all operations of the prior stage are completed. In this paper, an innovative lower bound based on solving the preemptive open shop (using a linear programming model in polynomial time) is devised for the makespan in a stage shop problem. In addition, three metaheuristics, including firefly, harmony search and water wave optimization algorithms are applied to the problem. The results of the algorithms are compared with each other, the proposed lower bound, and a commercial solver.
https://scientiairanica.sharif.edu/article_21119_50205ecc975ce43db0505ca7e11c83e1.pdf
2020-04-01
862
879
10.24200/sci.2018.5199.1146
Scheduling
Stage shop
Mixed shop
Water Wave Optimization
Lower bound
M.M.
Nasiri
mmnasiri@ut.ac.ir
1
School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
LEAD_AUTHOR
M.
Hamid
m.hamid31400@ut.ac.ir
2
School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran
AUTHOR
References:
1
1. Nasiri, M.M., Yazdanparast, R., and Jolai, F. "A simulation optimisation approach for real-time scheduling in an open shop environment using a composite dispatching rule", International Journal of Computer Integrated Manufacturing., 30(12), pp. 1239- 1252 (2017).
2
2. Lange, J. and Werner, F. "Approaches to modeling train scheduling problems as job-shop problems with blocking constraints", Journal of Scheduling., 21(2), pp. 191-207 (2018).
3
3. Shakhlevich, N.V., Sotskov, Y.N., and Werner, F. "Complexity of mixed shop scheduling problems: A survey", Eur. J. Oper. Res., 120(2), pp. 343-351 (2000).
4
4. Ramudhin, A. and Marier, P. "The generalized shifting bottleneck procedure", Eur. J. Oper. Res., 93(1), pp. 34-48 (1996).
5
5. Kis, T. "Job-shop scheduling with processing alternatives", Eur. J. Oper. Res., 151(2), pp. 307-332 (2003).
6
6. Ozguven, C., Ozbakir, L., and Yavuz, Y. "Mathematical models for job-shop scheduling problems with routing and process plan flexibility", Appl. Math. Modell., 34(6), pp. 1539-1548 (2010).
7
7. Nasiri, M.M. and Kianfar, F. "A hybrid scatter search for the partial job shop scheduling problem", The International Journal of Advanced Manufacturing Technology, 52(9-12), pp. 1031-1038 (2011).
8
8. Nasiri, M.M. and Kianfar, F. "A GA/TS algorithm for the stage shop scheduling problem", Comput. Ind. Eng., 61(1), pp. 161-170 (2011).
9
9. Dugarzhapov, A. and Kononov, A. "A polynomialtime algorithm for the preemptive mixed-shop problem with two unit operations per job", Journal of Scheduling, 19(1), pp. 61-72 (2016).
10
10. Doh, H.-H., Yu, J.-M., Kim, J.-S., et al. "A priority scheduling approach for flexible job shops with multiple process plans", International Journal of Production Research, 51(12), pp. 3748-3764 (2013).
11
11. Nasiri, M.M. "A modified ABC algorithm for the stage shop scheduling problem", Applied Soft Computing, 28, pp. 81-89 (2015).
12
12. Rossi, A., Soldani, S., and Lanzetta, M. "Hybrid stage shop scheduling", Expert Systems with Applications, 42(8), pp. 4105-4119 (2015).
13
13. Jin, L., Tang, Q., Zhang, C., et al. "More MILP models for integrated process planning and scheduling", International Journal of Production Research, 54(14) pp. 1-16 (2016).
14
14. Gao, K.-Z., Suganthan, P.N., Pan, Q.-K., et al. "Discrete harmony search algorithm for flexible job shop scheduling problem with multiple objectives", Journal of Intelligent Manufacturing, 27(2), pp. 363- 374 (2016).
15
15. Bo_zek, A. and Werner, F. "Flexible job shop scheduling with lot streaming and sublot size optimisation", International Journal of Production Research, 56(19), pp. 1-21 (2017).
16
16. Zubaran, T.K. and Ritt, M. "An effective heuristic algorithm for the partial shop scheduling problem", Comput. Oper. Res., 93, pp. 51-65 (2018).
17
17. Carlier, J. "The one-machine sequencing problem", Eur. J. Oper. Res., 11(1), pp. 42-47 (1982).
18
18. Nowicki, E. and Smutnicki, C. "An advanced tabu search algorithm for the job shop problem", Journal of Scheduling, 8(2), pp. 145-159 (2005).
19
19. Pinedo, M., Scheduling: Theory, Algorithms, and Systems, Springer (2012).
20
20. Cho, Y. and Sahni, S. "Preemptive scheduling of independent jobs with release and due times on open, flow and job shops", Oper. Res., 29(3), pp. 511-522 (1981).
21
21. Nasiri, M.M. "A pseudo particle swarm optimization for the RCPSP", The International Journal of Advanced Manufacturing Technology, 65, pp. 909-918 (2013).
22
22. Saka, M.P., Hasancebi, O., and Geem, Z.W. "Metaheuristics in structural optimization and discussions on harmony search algorithm", Swarm and Evolutionary Computation, 28, pp. 88-97 (2016).
23
23. Geem, Z.W., Kim, J.H., and Loganathan, G. "A new heuristic optimization algorithm: harmony search", Simulation, 76(2), pp. 60-68 (2001).
24
24. Omran, M.G. and Mahdavi, M. "Global-best harmony search", Applied Mathematics and Computation, 198(2), pp. 643-656 (2008).
25
25. Wang, L., Pan, Q.-K., and Tasgetiren, M.F. "A hybrid harmony search algorithm for the blocking permutation flow shop scheduling problem", Comput. Ind. Eng., 61(1), pp. 76-83 (2011).
26
26. Das, S., Mukhopadhyay, A., Roy, A., et al. "Exploratory power of the harmony search algorithm: analysis and improvements for global numerical optimization", Systems, Man, and Cybernetics, Part B: Cybernetics, IEEE Transactions on, 41(1), pp. 89-106 (2011).
27
27. Yang, X.-S., Nature-Inspired Metaheuristic Algorithms, Luniver Press (2010).
28
28. Khadwilard, A., Chansombat, S., Thepphakorn, T., et al. "Application of fire y algorithm and its parameter setting for job shop scheduling", in First Symposium on Hands-On Research and Development (2011).
29
29. Chandrasekaran, K. and Simon, S.P. "Network and reliability constrained unit commitment problem using binary real coded fire y algorithm", International Journal of Electrical Power & Energy Systems, 43(1), pp. 921-932 (2012).
30
30. Gandomi, A., Yang, X.-S., Talatahari, S., et al. "Fire y algorithm with chaos", Communications in Nonlinear Science and Numerical Simulation, 18(1), pp. 89-98 (2013).
31
31. Zheng, Y.-J. "Water wave optimization: a new natureinspired metaheuristic", Comput. Oper. Res., 55, pp. 1-11 (2015).
32
32. Taillard, E.D. Available from: <http://mistic.heigvd. ch/taillard> (2017).
33
33. Taillard, E.D. "Benchmarks for basic scheduling problems", Eur. J. Oper. Res., 64(2), pp. 278-285 (1993).
34
34. Mousavi, S.M., Hajipour, V., Niaki, S.T.A., et al. "Optimizing multi-item multi-period inventory control system with discounted cash flow and inflation: Two calibrated meta-heuristic algorithms", Appl. Math. Modell., 37(4), pp. 2241-2256 (2013).
35
35. Peace, G.S., Taguchi Methods: A Hands-on Approach, Addison Wesley Publishing Company (1993).
36
36. Garcia, S., Molina, D., Lozano, M., et al. "A study on the use of non-parametric tests for analyzing the evolutionary algorithms' behaviour: a case study on the CEC'2005 special session on real parameter optimization", Journal of Heuristics, 15(6), pp. 617-644 (2009).
37
37. Zar, J., Biostatistical analysis, 4th Edition, Prentice Hall, Englewood Cliffs (1999).
38
ORIGINAL_ARTICLE
A novel assessment approach to EFQM driven institutionalization using integrated fuzzy multi-criteria decision-making methods
It is becoming increasingly difficult for enterprises to survive under competitive conditions. Enterprises with high levels of institutionalization are able to survive and benefit more advantages than their competitors. Excellence models are widespread tools for measuring the degree of institutionalization of enterprises. The importance of institutionalization has been increasingly considered in excellence models. EFQM (European Foundation for Quality Management) is a suitable tool to show how successful organizations are in terms of institutionalization. In this study, EFQM criteria are evaluated with fuzzy multi-criteria decision-making techniques. The fuzzy DEMATEL method is used to determine the interactions amongst main EFQM criteria. According to the relationship diagram obtained from the Fuzzy DEMATEL method, the weights of the sub criteria are calculated according to the expert evaluations using Fuzzy Analytic Network Process (FANP) method. The criterion “Business Results” has been determined to be the most important criteria. The criteria weights are taken as input for the VIKOR method. The institutional scores obtained by the proposed method, and the scores given by the EFQM evaluators to the institutions, are statistically analyzed to demonstrate that the proposed method has produced meaningful results.
https://scientiairanica.sharif.edu/article_21058_93b3e9ee2b28c7475dc05acecd904290.pdf
2020-04-01
880
892
10.24200/sci.2018.5398.1259
Computational Organization Performance
EFQM
Excellence models
Fuzzy DEMATEL
Fuzzy ANP
VIKOR
O.
Uygun
ouygun@sakarya.edu.tr
1
Department of Industrial Engineering, Faculty of Engineering, Sakarya University, Turkey
AUTHOR
S.
Yalcin
selinyalcin@beykent.edu.tr
2
Department of Industrial Engineering, Faculty of Engineering and Architecture, Beykent University, Turkey.
AUTHOR
A.
Kiraz
kiraz@sakarya.edu.tr
3
Department of Industrial Engineering, Faculty of Engineering, Sakarya University, Turkey.
LEAD_AUTHOR
E.
Furkan Erkan
eneserkan@sakarya.edu.tr
4
Department of Industrial Engineering, Faculty of Engineering, Sakarya University, Turkey.
AUTHOR
References:
1
1. Aydemir, O.T., Alpkan, L., Kitapci, H., et al. "Ozegerleme modellerinin denge skor kartgyla entegre edilmesi: bir ozdegerleme modeli onerisi", Dumlupinar Universitesi Sosyal Bilimler Dergisi, 25(1), pp. 205- 220 (2015).
2
2. Steed, C., Maslow, D., and Mazaletskaya, A. "The EFQM excellence model for deploying quality management: A British-Russian journey", Higher Education Eur, 30, pp. 307-319 (2005).
3
3. Yazici, S. "Mukemmellikte yeni arayislar: EFQM mukemmellik modeli ve orgutsel ogrenme", On Kalite Dernegi, 39, pp. 32-38 (2000).
4
4. Yaghoubi, N.M., Bandeii, M., and Moloudi, J. "An empirical study of the EFQM excellence model in Iran", International Journal of Business Management, 6(5), p. 260 (2011).
5
5. European Foundation for Quality Management (EFQM), EFQM Model for Business Excellence, Brussels: EFQM (2012).
6
6. Liu, Y.-H. and Ko, P.-F. "A modified EFQM Excellence Model for effective evaluation in the hotel industry", Total Quality Management Business Excellence, 29(13), pp. 1-14 (2017).
7
7. Ziaei, A.E., Alirezaee, H., Riyahi, A., et al. "Assess causal relationships of EFQM model criteria using fuzzy dematel", Int Bus Manag, 10(11), pp. 2185-2189 (2016).
8
8. Taji, M., Siadat, A., and Hoveida, R. "Identification and ranking of key factors influencing organizational agility implementation on total quality management", Int Bus Manag, 10(15), pp. 2814-2822 (2016).
9
9. Najafi, A. and Naji, E. "Implementing the EFQM model in the calcimin company using the fuzzy hybrid electre approach", Indian Journal Sci Technol, 9(44), pp. 1-7 (2016).
10
10. Saryazdi, M.D., Eslami, H., Shakerian, H., et al. "Utilizing fuzzy expert system in organizations' performance assessment", IIOAB J, 7, pp. 410-417 (2016).
11
11. Hosseini, J.E., Dehghani, M.S., and Mostafaeipour, A. "Implementing fuzzy logic and AHP into the EFQM model for performance improvement: A case study", Applied Soft Computer, 36, pp. 165-176 (2015).
12
12. Sajedi, M.A. "An improved TOPSIS/EFQM methodology for evaluating the performance of organizations", Life Sci. J., 10(1), pp. 4315-4322 (2013).
13
13. Aydin, S., Kahraman, C., and Kaya, _I. "A new fuzzy multicriteria decision making approach: An application for European quality award assessment", Knowledge Based Systems, 32, pp. 37-46 (2012).
14
14. Daniel, J., Yusuff, R.M., and Jassbi, J. "Assessment system based on fuzzy scoring in European foundation for quality management (EFQM): Business excellence model", 5(15), pp. 6209-6220 (2011).
15
15. Dodangeh, J., Yusuff, R.M., Ismail, N., et al. "Designing fuzzy multi criteria decision making model for best selection of areas for improvement in European foundation for quality management (EFQM) model", Afr J. Bus. Manag., 5(12), p. 5010 (2011).
16
16. Paghaleh, M.J. "Performance measurement by EFQM excellence model with fuzzy approach", Aust. J. Basic Appl. Sci., 5(10), pp. 1020-1024 (2001).
17
17. Kahveci, T.C. "The institutionalization and the enterprise modeling in the manufacturing firms", Dissertation, Sakarya University (2007).
18
18. Dinc, E. "Muhasebe bilgi sistemi ve kurumsallasma duzeyi arasindaki iliskiye yonelik bir arastirma", Sosyal ve Ekonomik Arastirmalar Dergisi, 27(1), pp. 21-50 (2014).
19
19. Alpay, G., Bodur, M., Yilmaz, C., et al. "Performance implications of institutionalization process in familyowned businesses: evidence from an emerging economy", Journal World Business, 43(4), pp. 435-448 (2008).
20
20. Uygun, O., Kahveci, T.C., Taskin, H., et al. "Readiness assessment model for institutionalization of SMEs using fuzzy hybrid MCDM techniques", Computer Industrial Engineering, 88(1), pp. 217-228 (2015).
21
21. C omlek, O. " Ozdegerlendirme ve verimlilik analizi yoluyla performans degerlendirmeye yonelik bir model onerisi", Dissertation, Gebze Yuksek Teknoloji Enstit usu _Isletme Anabilim Dali (2009).
22
22. Chaghooshi, A.J., Rahmani, M., and Mohammad, K.Z. "Formulation and prioritization of strategies in tile and ceramic industry: a case study", N. Y. Sci. J., 5(6), pp. 79-87 (2012).
23
23. Wu, H.Y., Lin, Y.K., and Chang, C.H. "Performance evaluation of extension education centers in universities based on the balanced scorecard", Evaluation Program Plan, 34(1), pp. 37-50 (2011).
24
24. Liou, J.H. and Chuang, Y.T. "Developing a hybrid multi-criteria model for selection of outsourcing providers", Expert Syst. Appl., 37(5), pp. 3755-3761 (2010).
25
25. Lin, C.J., and Wu, W.W. "A fuzzy extension of the dematel method for group decision making", Eur. J. Oper. Res., 156, pp. 445-455 (2004).
26
26. Lin, C.J. and Wu, W.W. "A causal analytical method for group decision-making under fuzzy environment", Int. J. Qual. Reliab. Manag., 34(1), pp. 205-213 (2008).
27
27. Saaty, T.L. "The analytic network process. In Decision making with the analytic network process", Springer, Boston, MA. pp. 1-26 (2006).
28
28. Chang, D.Y. "Applications of the extent analysis method on fuzzy AHP", Eur. J. Oper. Res., 95(3), pp. 649-655 (1996).
29
29. Opricovic, S. "Multicriteria optimization of civil engineering systems", Faculty of Civil Engineering, Belgrade, 2(1), pp. 5-21 (1998).
30
30. Opricovic, S. and Tzeng, G.H. "Multicriteria planning of post-earthquake sustainable reconstruction", Computer Aided Civ. Infrastruct. Eng., 17(1), pp. 211-220 (2002).
31
31. Poyraz, B. "The effects of self assessment study which is made on people criteria of European excellence model on human resources activities - a case study ", Dissertation, Dokuz Eylul University (2008).
32
ORIGINAL_ARTICLE
The application of multivariate analysis approaches to designing NSBM model considering undesirable variable and shared resources
Due to the competitiveness of banking industry and increasing bargaining power of customers, evaluation of the banks’ performance is crucial to better serve the classified customers in a universal system .In this paper, with consideration of segmenting the customers into personal and business ones, methods such as confirmatory factor analysis (CFA) and structural equation model (SEM) have been used in selecting appropriate variables of the network data envelopment analysis (NDEA) model based on network slacks-based measure and consideration of the undesirable variables and shared resources. The SEM model has been used to establish a proper connection between the different dimension of the NDEA model and CFA model has been used to identify the importance of each dimension. Also, the proposed model has been used to measure the Operational and decomposed universal efficiency of one of the Iranian bank branches (Day Bank). The results show that the extracted model provides managers with a suitable perspective in adopting appropriate policies to promote their performance in the different sectors, including deposit attraction, financial serving personal and business banking customers, and profit generation, and also in comparing them in the different dimensions of the model.
https://scientiairanica.sharif.edu/article_21053_09c3f73f1dc76477e980df5afeb9bac9.pdf
2020-04-01
893
917
10.24200/sci.2018.5578.1392
confirmatory factor analysis
structural equation
network data envelopment analysis
network slacks-based measure
universal banking system
H.
Ghasemi Toudeshki
homa.ghasemi63@gmail.com
1
Department of Industrial Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.
AUTHOR
E.
Najafi
najafi1515@yahoo.com
2
Department of Industrial Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
LEAD_AUTHOR
F.
Hosseinzadeh Lotfi
farhad@hosseinzadeh.ir
3
Department of Mathematics, Science and Research Branch, Islamic Azad University, Tehran, Iran.
AUTHOR
F.
Movahedi-Sobhani
fmovahedi@iau.ac.ir
4
Department of Industrial Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
AUTHOR
References:
1
1. Amado, C.A.F., Santos, S.P., and Marques, P.M. -"Integrating the data envelopment analysis and the balanced scorecard approaches for enhanced performance assessment", Omega, 40, pp. 390-403 (2012).
2
2. Charnes, A., Cooper, W.W., and Rhodes, E.L. "Measuring the efficiency of decision making units", European Journal of Operational Research, 2(6), pp. 429-444 (1978).
3
3. Lewis, H.F. and Sexton, T.R. "Network DEA: efficiency analysis of organizations with complex internal structure", Computers & Operations Research, 31(9), pp. 1365-1410 (2004).
4
4. Fukuyama, H. and Weber, W.L. "A slacks-based inefficiency measure for a two-stage system with bad outputs", Omega, 38(5), pp. 398-409 (2010).
5
5. Fare, R. and Grosskopf, S. "Network DEA", Socio- Economic Planning Sciences, 34(1), pp. 35-49 (2000).
6
6. Sexton, T.R. and Lewis, H.F. "Two-stage DEA: An application to major league baseball", Journal of Productivity Analysis, 19(2-3), pp. 227-249 (2003).
7
7. Tone, K. and Tsutsui, M. "Network DEA: a slacksbased measure approach", European Journal of Operational Research, 197(1), pp. 243-252 (2009).
8
8. Avkiran, N.K. "Opening the black box of efficiency analysis: an illustration with UAE banks", Omega, 37(4), pp. 930-941 (2009).
9
9. Holod, D. and Lewis, H.F. "Resolving the deposit dilemma: A new DEA bank efficiency model", Journal of Banking & Finance, 35(11), pp. 2801-2810 (2011).
10
10. Kao, C. and Hwang, S.N. "Efficiency measurement for network systems: IT impact on firm performance", Decision Support Systems, 48(3), pp. 437-446 (2010).
11
11. Ebrahimnejad, A., Tavana, M., Hosseinzadeh Lotfi, F., Shahverdi, R., and Yousefpour, M. "A three-stage data envelopment analysis model with application to banking industry", Measurement, 49, pp. 308-319 (2014).
12
12. Huang, J.H., Yang, X.G., Cheng, G., and Wang, S.Y. "A comprehensive eco-efficiency model and dynamics of regional eco-efficiency in China", Journal of Cleaner Production, 67, pp. 228-238 (2014).
13
13. Huang, J., Chen, J., and Yin, Z. "A network DEA model with super efficiency and undesirable outputs: An application to bank efficiency in China", Mathematical Problems in Engineering, 2014, pp. 1-14 (2014).
14
14. Tavassoli, M., Farzipoor Saen, R., and Faramarzi, G.R. "A new super-efficiency model in the presence of both zero data and undesirable outputs", Scientia Iranica, Transactions E: Industrial Engineering, 21, pp. 2360-2367 (2014).
15
15. Olfat, L., Amiri, M., Soufi, J., and Pishdar, M. "A dynamic network efficiency measurement of airports performance considering sustainable development concept: A fuzzy dynamic network-DEA approach", Journal of Air Transport Management, 57, pp. 272-29 (2016).
16
16. Zha, Y. and Liang, L. "Two-stage cooperation model with input freely distributed among the stages", European Journal of Operational Research, 205, pp. 332-338 (2010).
17
17. Wu, J., Zhu, Q., Ji, X., Chu, J., and Liang, L. "Two-stage network processes with shared resources and resources recovered from undesirable outputs", European Journal of Operational Research, 251, pp. 182-197 (2016).
18
18. Zegordi, S.H. and Omid, A. "Efficiency assessment of Iranian handmade carpet company by network DEA", Scientia Iranica, Transactions E: Industrial Engineering, 25, pp. 483-491 (2018).
19
19. Tavassoli, M., Faramarzi, G.R., and Farzipoor Saen, R. "Efficiency and effectiveness in airline performance using a SBM-NDEA model in the presence of shared input", Journal of Air Transport Management, 34, pp. 146-153 (2014).
20
20. Bian, Y. "A Gram-Schmidt process based approach for improving DEA discrimination in the presence of large dimensionality of data set", Expert Systems with Applications, 39(3), pp. 3793-3799 (2012).
21
21. Jenkins, L. and Anderson, M. "A multivariate statistic approach to reducing the number of variables in data envelopment analysis", European Journal of Operational Research, 147(1), pp. 51-61 (2003).
22
22. Bagheria, R., Rezaeiana, A., and Fazlalyb, A. "A mathematical model to evaluate knowledge in the knowledge-based organizations", Scientia Iranica, Transactions E: Industrial Engineering, 22, pp. 2716- 2721 (2015).
23
23. Pedraja-Chaparro, F., Salinas-Jimenez, J., and Smith, P. "On the quality of the data envelopment analysis model", Journal of the Operational Research Society, 50(6), pp. 636-644 (1999).
24
24. Berger, A. and Humphrey, D. "Efficiency of financial institutions: International survey and directions for future research", European Journal of Operational Research, 98, pp. 175-212 (1997).
25
25. Golany, B. and Roll, Y. "An application procedure for DEA", Omega, 17(3), pp. 237-250 (1989).
26
26. Adler, N. and Golany, B. "Evaluation of deregulated airline networks using data envelopment analysis combined with principle component analysis with an application to Western Europe", European Journal of Operational Research, 132(2), pp. 260-273 (2001).
27
27. Adler, N. and Golany, B. "Including principle component weights to improve discrimination in data envelopment analysis", Journal of the Operational Research Society, 53(9), pp. 985-99 (2002).
28
28. Adler, N. and Yazhemsky, E. "Improving discrimination in data envelopment analysis: PCA-DEA or variable reduction", European Journal of Operational Research, 202(1), pp. 273-284 (2010).
29
29. Kao, L.J., Lu, C.J., and Chiu, C.C. "Efficiency measurement using independent component analysis and data envelopment analysis", European Journal of Operational Research, 210(2), pp. 310-317 (2011).
30
30. Hyvarinen, A. and Oja, E. "Independent component analysis: algorithms and applications", Neural Networks, 13(4-5), pp. 411-430 (2000).
31
31. Lin, T.Y. and Chiu, S.H. "Using independent component analysis and network DEA to improve bank performance evaluation", Economic Modelling, 32, pp. 608-616 (2013).
32
32. Ebrahimpour, M., Olfat, L., Amiri, M., and Bamdad Soofi, J. "A Network data envelopment analysis model for supply chain performance evaluation: real case of Iranian pharmaceutical industry", International Journal of Industrial Engineering & Production Research, 25(2), pp. 125-137 (2013).
33
33. Aslania, G., Momeni-Masuleh, S.H. Malekand, A., and Ghorbani, F. "Bank efficiency evaluation using a neural network-DEA method", Iranian Journal of Mathematical Sciences and Informatics, 4(2), pp. 33- 48 (2009).
34
34. Fries, S. and Taci, A. "Cost efficiency of banks in transition: evidence from 289 banks in 15 post-communist countries", Journal of Banking and Finance, 29(1), pp. 55-81 (2005).
35
35. Bonin, J.P., Hasan, I., and Wachtel, P. "Bank performance, efficiency and ownership in transition countries", Journal of Banking and Finance, 29(1), pp. 31-53 (2005).
36
36. Berger, A.N., Clarke, G.R.G., Cull, R., Klapper, L., and Udell, GF. "Corporate governance and bank performance: a joint analysis of the static, selection, and dynamic effects of domestic, foreign, and state ownership", Journal of Banking and Finance, 29, pp. 2179-2221 (2005).
37
37. Bonaccorsi di Patti, E. and Hardy, D. "Financial sector liberalization, bank privatization, and efficiency: evidence from Pakistan", Journal of Banking and Finance, 29, pp. 2381-2406 (2005).
38
38. Bonin, J.P., Hasan, I., and Wachtel, P. "Privatization matters: bank efficiency in transition countries", Journal of Banking and Finance, 29, pp. 2155-2178 (2005).
39
39. Shafiee, M., Sangi, M., and Ghaderi, M. "Bank performance evaluation using dynamic DEA: A slacksbased measure approach", Journal of Data Envelopment Analysis and Decision Science, 2013, pp. 1-12 (2013).
40
40. Boubakri, N., Cosset, J.C., Fischer, K., and Guedhami, O. "Privatization and bank performance in developing countries", Journal of Banking and Finance, 29, pp. 2015-2041 (2005).
41
41. Williams, J. and Nguyen, N. "Financial liberalization, crisis, and restructuring: a comparative study of bank performance and bank governance in south east Asia", Journal of Banking and Finance, 29, pp. 2119- 2154 (2005).
42
42. Fu, X. and Heffernan, S. "Cost X-efficiency in China's banking sector", China Economic Review, 18, pp. 35- 53 (2007).
43
43. Keikha-Javan, S., Rostamy-Malkhalifeh, M., and Payan, A. "The parallel network dynamic DEA model with interval data", Journal of Data Envelopment Analysis and Decision Science, 2014, pp. 1-11 (2014).
44
44. Castelli, L., Pesenti, R., and Ukovich, W.A. "Classification of DEA models when the internal structure of the decision making units is considered", Annals of Operations Research, 173(1), pp. 207-235 (2010).
45
45. Fare, R. "Measuring Farrell efficiency for a firm with intermediate inputs", Academia Economic Papers, 19(12), pp. 329-340 (1991).
46
46. Fare, R. and Grosskopf, S., Intertemporal Production Frontiers: With Dynamic DEA, Kluwer Academic Publishers, pp. 158-160, Boston, London (1996).
47
47. Fare, R. and Grosskopf, S. "Productivity and intermediate products: A frontier approach", Economics Letters, 50(1), pp. 65-70 (1996).
48
48. Fare, R. and Grosskopf, S. "Network DEA", Socio-Economic Planning Sciences, 34(1), pp. 35-49 (2000).
49
49. Fare, R. and Whittaker, G. "An intermediate input model of dairy production using complex survey data", Journal of Agricultural Economics, 46(2), pp. 201-213 (1995).
50
50. Tone, K. and Tsutsui, M. "Dynamic DEA: A slacksbased measure approach", Omega, 38(3-4), pp. 145- 156 (2010).
51
51. Hsieh, L.F. and Lin, L.H. "A performance evaluation model for international tourist hotels in Taiwan - An application of the relational network DEA", International Journal of Hospitality Management, 29, pp. 14-24 (2010).
52
52. Kao, C. "Network data envelopment analysis: A review", European Journal of Operational Research, 239, pp. 1-16 (2014).
53
53. Agrell, P.J., Hatami-Marbini, A., and Ukovich, W.A. "Frontier-based performance analysis models for supply chain management: State of the art and research directions", Computers & Industrial Engineering, 66(3), pp. 567-583 (2013).
54
54. Koronakos, G., Sotiros, D., and Despotis, D.K. "Reformulation of network data envelopment analysis models using a common modelling framework", European Journal of Operational Research, 287, pp. 472-480 (2019).
55
55. Chen, Y., Cook, W.D., Kao, C., and Zhu, J. "Network DEA pitfalls: divisional efficiency and frontier projection under general network structures", European Journal of Operational Research, 226, pp. 507-515 (2013).
56
56. Despotis, D.K., Koronakos, G., Sotiros, D., and Zhu, J. "Composition versus decomposition in two-stage network DEA: a reverse approach", Journal of Productivity Analysis, Journal of Productivity Analysis, 45(1), pp. 71-87 (2016).
57
57. Ang, S. and Chen, C.M. "Pitfalls of decomposition weights in the additive multi-stage DEA model", Omega-Int. J. Manage, 53, pp. 139-153 (2016).
58
58. Sotiros, D., Koronakos G., and Despotis, D.K. "Dominance at the divisional efficiencies level in network DEA: The case of two-stage processes", Omega, Elsevier, 85(C), pp. 144-155 (2019).
59
59. Tone, K. "A slacks-based measure of efficiency in data envelopment analysis", European Journal of Operational Research, 130, pp. 498-509 (2001).
60
60. Smith, P. "Model misspecification in data envelopment analysis", Annals of Operations Research, 73, pp. 233-252 (1997).
61
61. Necmi, K.A. and Alan, M. "Sensitivity analysis of network DEA: NSBM versus NRAM", Applied Mathematics and Computation, 218, pp. 11226-11239 (2012).
62
62. Lothgren, M. and Tambour, M. "Productivity and customer satisfaction in Swedish pharmacies: A DEA network model", EJOR, 115(3), pp. 449-458 (1999).
63
63. Tone, K., Advances in DEA Theory and Applications: With Extensions to Forecasting Models, John Wiley & Sons Ltd, pp. 119-1, UK (2017).
64
64. Resti, A. "Evaluating the cost-efficiency of the Italian banking system: What can be learned from the joint application of parametric and non-parametric techniques", Journal of Banking and Finance, 21, pp. 221-250 (1997).
65
65. Devaney, M. and Weber, W.L. "Small-business lending and profit efficiency in commercial banking", Journal of Financial Services Research, 22, pp. 225- 246 (2002).
66
66. Glass, J.C., McKillop, D.G., and Rasaratnam, S. "Irish credit unions: investigating performance determinants and the opportunity cost of regulatory compliance", Journal of Banking and Finance, 34, pp. 67-76 (2010).
67
67. Isik, I. and Hassan, M.K. "Technical, scale and allocative efficiencies of Turkish banking industry", Journal of Banking and Finance, 26, pp. 719-766 (2002).
68
68. Beccalli, E., Casu, B., and Girardone, C. "Efficiency and stock performance in European banking", Journal of Business Finance and Accounting, 33, pp. 218-235 (2006).
69
69. Giokas, I.D. "Assessing the efficiency in operations of a large Greek bank branch network adopting different economic behaviors", Economic Modelling, 2(3), pp. 559-547 (2008).
70
70. Sturm, J.E. and Williams, B. "Characteristics determining the efficiency of foreign banks in Australia", Journal of Banking and Finance, 32(11), pp. 2346-60 (2008).
71
71. Thanassoulis, E., Portela, C.S.M., and Despic, O., Data Envelopment Analysis: The Mathematical Programming Approach to Efficiency Analysis, Oxford University Press, pp. 270-300, New York (2008).
72
72. Lozano-Vivas, A. and Pasiouras, F. "The impact of non-traditional activities on the estimation of bank efficiency: international evidence", Journal of Banking and Finance, 34(7), pp. 1436-1449 (2010).
73
73. Hsiao, H., Chang, H., Cianci, A.M., and Huang, L. "First financial restructuring and operating efficiency: evidence from Taiwanese commercial banks", Journal of Banking and Finance, 34(7), pp. 1461-1471 (2010).
74
74. Banker, R.D., Chang, H., and Lee, S. "Differential impact of Korean banking system reforms on bank productivity", Journal of Banking and Finance, 34(7), pp. 1450-1460 (2010).
75
75. Bergendahl, G. and Lindblom, T. "Evaluating the performance of Swedish savings banks according to service efficiency", European Journal of Operational Research, 185, pp. 1663-1673 (2008).
76
76. Beverly, H. "The impact of network size on bank branch performance", Journal of Banking & Finance, 31(12), pp. 3782-3805 (2007).
77
77. Giokas, D.I. "Cost efficiency impact of bank branch characteristics and location. An illustrative application to Greek bank branches", Managerial Finance, 34(3), pp. 172-185 (2008).
78
78. Portela, M.C.A.S. and Thanassoulis, E. "Comparative efficiency analysis of Portuguese bank branches", European Journal of Operational Research, 177, pp. 1275-1288 (2007).
79
79. Paradi, J.C., Min, E., and Yang, X. "Evaluating Canadian bank branch operational efficiency from staff allocation: A DEA approach", Management and Organizational Studies, 2(1), pp. 52-65 (2015).
80
80. Paradi, J.C. and Zhu, H. "A survey on bank branch efficiency and performance research with data envelopment analysis", Omega, 41, pp. 61-79 (2013).
81
81. Rakhshan, F., Alirezaee, M.R., Mohammadzadeh Modirii, M., and Iranmanesh, M. "An insight into the model structures applied in DEA-based bank branch efficiency measurements", Journal of Industrial and Systems Engineering, 9(2), pp. 38-53 (2016).
82
82. Satoshi, O. and Masako, T. "Management efficiency in Japanese regional banks: A network DEA", Procedia-Social and Behavioral Sciences, 172, pp. 511-518 (2015).
83
83. Cooka, W.D. and Zhub, J. "Classifying inputs and outputs in data envelopment analysis", European Journal of Operational Research, 180, pp. 692-699(2007).
84
84. Wanga, K., Huangb, W., Wuc, J., and Liu, Y.N. "Efficiency measures of the Chinese commercial banking system using an additive two-stage DEA", Omega, 44, pp. 5-20 (2014).
85
85. Wu, H.Y. "Constructing a strategy map for banking institutions with key performance indicators of the balanced scorecard", Valuation and Program Planning, 35, pp. 303-320 (2012).
86
86. Najafi, K. and Andervazh, L. "Compare the performance of customer satisfaction and loyalty in the mobile service business bank, bank Saderat between Ahvaz and Pasargad bank study uses data envelopment analysis", Journal of Applied Environmental and Biological Sciences, 5(10), pp. 246-251 (2015).
87
87. Wenbin, L.B., Zhongbao, Z.N., Chaoqun, M., Debin, L., and Wanfang, S. "Two-stage DEA models with undesirable input-intermediate-outputs", Omega, 56, pp. 74-87 (2015).
88
88. Shahhoseini, M.A., Khassehkhan, S., and Shanyani, N. "Identifying key performance indicators of an Iranian Islamic bank based on BSC and AHP", Journal of American Science, 8(1), pp. 64-73 (2012).
89
89. Mostafa, M. "Modeling the efficiency of GCC banks: a data envelopment analysis approach", International Journal of Productivity and Performance Management, 56(7), pp. 623-643 (2007).
90
90. Bolt, W. and Humphrey, D. "Banking competition efficiency in Europe: A frontier approach", Journal of Banking and Finance, 34(8), pp. 1808-1817 (2010).
91
91. Chen, P. and Liu, C.Z. "Efficiency on the property market by DEA analysis based on SEM", International Conference on Management Science & Engineering (14th), August 20-22, pp. 2318-2324 (2007).
92
92. Wagner, J.M. and Daniel, G.S. "Stepwise selection of variables in data envelopment analysis: Procedures and managerial perspectives", European Journal of Operational Research, 180(1), pp. 57-67 (2007).
93
93. Nataraja, N.R. and Johnson, A.L. "Guidelines for using variable selection techniques in data envelopment analysis", European Journal of Operational Research, 215(3), pp. 662-669 (2011).
94
94. Aslan, N., Shahrivar, A.A., and Abdollahi, H. Multiobjective optimization of some process parameters of a lab-scale thickener using grey relational analysis", Separation and Purification Technology, 90, pp. 189-195 (2012).
95
95. Qin, Z. and Song, I., Joint Variable Selection for Data Envelopment Analysis via Group Sparsity (March 9, 2014). Available at SSRN: https://ssrn.com/abstract=2406690 or http://dx.doi.org/10.2139/ssrn.2406690.
96
96. Chao, H., Chong, D., and Miao, G. "A hybrid approach using two-level DEA for financial failure prediction and integrated SE-DEA and GCA for indicator selection", Applied Mathematics and Computation, 251, pp. 431-441 (2015).
97
97. Kirschkamp, A. "A contingency based view of chief executive officers' early warning behavior", Deutscher Universitatsverlag, pp. 250-265, Germany (2008).
98
98. Hox, J.J. "An introduction to structural equation modeling", Family Science Review, 11, pp. 354-373 (1998).
99
99. Henseler, J., Ringle, C.M., and Sinkovics, R.R. "The use of partial least squares path modeling in international marketing", Advances in International Marketing, 20, pp. 227-320 (2009).
100
100. Hulland, J. "Use of partial least squares (PLS) in strategic management research: A review of four recent studies", Strategic Management Journal, 20(2), pp. 195-204 (1999).
101
101. Cinca, C.S. and Molinero, C.M. "Selecting DEA specifications and ranking units via PCA", Journal of the Operational Research Society, 55(5), pp. 521- 5289 (2004).
102
102. Tone, K. "A slacks-based measure of efficiency in data envelopment analysis", European Journal of Operational Research, 130, pp. 498-509 (2001).
103
ORIGINAL_ARTICLE
Optimal production inventory decision with learning and fatigue behavioral effects in labor-intensive manufacturing
Behavioral economic has received much attention recently. Learning and fatigue are two typical behavioral phenomena in industrial production operation processes. The existence of learning and fatigue result in a dynamic change in productivity. In this paper, a classical economic production quantity model is extended to consider the behavioral economic value of learning and fatigue. Based on a real case study, each production cycle is divided into five phases, i.e, the learning phase, stable phase, fatigue phase, fatigue recovery (rest) phase, and the relearning phase. The new production inventory decision model is incorporated with dynamic productivity and learning-stable-fatigue-recovery effect. Numerical simulation and sensitivity analysis show that appropriate rest alleviates employees fatigue and increases productivity, resulting in a lower average production cost. On the other hand, when the rest time is too high, exceeding a certain value, it leads to the decline of the actual labor productivity, resulting in an increase in the average cost of the system.
https://scientiairanica.sharif.edu/article_21014_3efd208e1213175653d6cea332cfd34b.pdf
2020-04-01
918
934
10.24200/sci.2018.50614.1788
Behavioral economics
productivity
human factor
learning effect
fatigue effect
production inventory decision
K.
Fu
kaifangfu@sina.com
1
Department of Logistics Management, School of Business Administration, Guangdong University of Finance, Guangzhou, 510521, China.
AUTHOR
Zh.
Chen
mnsczx@mail.sysu.edu.cn
2
Department of Management Science, School of Business, Sun Yat-Sen University, Guangzhou, 510275, China.
AUTHOR
Y.
Zhang
zhangyr26@mail2.sysu.edu.cn
3
Department of Management Science, School of Business, Sun Yat-Sen University, Guangzhou, 510275, China.
AUTHOR
H.M.
Wee
weehm@cycu.edu.tw
4
Department of Industrial Engineering, Chung Yuan Christian University, No. 200, Chung Pei Road, Chung li District, Taoyuan City, 32023, Taiwan.
LEAD_AUTHOR
References:
1
1. Bendoly, E., Donohue, K., and Schultz, K.L. "Behavior in operations management: Assessing recent findings and revisiting old assumptions", Journal of Operations Management, 24(6), pp. 737-752 (2006).
2
2. Zhao, X., Zhao, X., and Wu, Y. "Opportunities for research in behavioral operations management", International Journal of Production Economics, 142(1), pp. 1-2 (2013).
3
3. Wright, T.P. "Factors affecting the cost of airplanes", Journal of Aeronautical Sciences, 3(4), pp. 122-128 (1936).
4
4. Jaber, M.Y., Givi, Z.S., and Neumann, W.P. "Incorporating human fatigue and recovery into the learningforgetting process", Applied Mathematical Modelling, 37(12-13), pp. 7287-7299 (2013).
5
5. Jaber, M.Y. and Guiffrida, A.L. "Observations on the economic manufacture quantity model with learning and forgetting", International Transactions in Operational Research, 14(2), pp. 91-104 (2007).
6
6. Jaber, M.Y. and Bonney, M. "The lot sizing problem and the learning curve: A review", In M.Y. Jaber (Ed.), Learning Curves: Theory, Models, and Applications, FL, Boca Raton: CRC Press-Taylor and Francis Group, pp. 265-291 (2011).
7
7. Salameh, M.K., Abdul-Malak, M.A.U., and Jaber, M.Y. "Mathematical modelling of the effect of human learning in the finite production inventory model", Applied Mathematical Modelling, 17(11), pp. 613-615 (1993).
8
8. Jaber, M.Y. and Guiffrida, A.L. "Observations on the economic manufacture quantity model with learning and forgetting", International Transactions in Operational Research, 14(2), pp. 91-104 (2007).
9
9. Jaber, M.Y. and Bonney, M. "The lot sizing problem and the learning curve: A review", In M.Y. Jaber (Ed.), Learning Curves: Theory, Models, and Applications, FL, Boca Raton: CRC Press-Taylor and Francis Group. pp. 265-291 (2011).
10
10. Salameh, M.K., Abdul-Malak, M.A.U., and Jaber, M.Y. "Mathematical modelling of the effect of human learning in the finite production inventory model", Applied Mathematical Modelling, 17(11), pp. 613-615 (1993).
11
11. Jaber, M.Y. and Salameh, M.K. "Optimal lot sizing under learning considerations: shortages allowed and backordered", Applied Mathematical Modelling, 19(5), pp. 307-310 (1995).
12
12. Balkhi, Z.T. "The effects of learning on the optimal production lot size for deteriorating and partially backordered items with time varying demand and deterioration rates", Applied Mathematical Modelling, 27(10), pp. 763-779 (2003).
13
13. Boer, A.V.D. and Zwart, B. "Dynamic pricing and learning with finite inventories", Operations Research, 63(4), pp. 965-978 (2015).
14
14. Teng, J.T., Lou, K.R., and Wang, L. "Optimal trade credit and lot size policies in economic production quantity models with learning curve production costs", International Journal of Production Economics, 155(5), pp. 318-323 (2014).
15
15. Khan, M., Jaber, M.Y., and Ahmad, A.R. "An integrated supply chain model with errors in quality inspection and learning in production", Omega, 42(1), pp. 16-24 (2014).
16
16. Mahata, G.C., "A production-inventory model with imperfect production process and partial backlogging under learning considerations in fuzzy random environments", Journal of Intelligent Manufacturing, 28(4), pp. 883-897 (2017).
17
17. Khan, M., Hussain, M., and Cardenasbarron, L.E. "Learning and screening errors in an EPQ inventory model for supply chains with stochastic lead time demands", International Journal of Production Research, 135, pp.1-17 (2017).
18
18. Jaber, M.Y. and Bonney, M. "Production breaks and the learning curve: the forgetting phenomenon", Applied Mathematical Modelling, 20(2), pp. 162-169 (1996).
19
19. Chiu, H.N. and Chen, H.M. "An optimal algorithm for solving the dynamic lot-sizing model with learning and forgetting in setups and production", International Journal of Production Economics, 95(2), pp. 179-193 (2005).
20
20. Alamri, A.A. and Balkhi, Z.T. "The effects of learning and forgetting on the optimal production lot size for deteriorating items with time varying demand and deterioration rates", International Journal of Production Economics, 107(1), pp. 125-138 (2007).
21
21. Teyarachakul, S., Chand, S., and Ward, J. "Effect of learning and forgetting on the batch size", Production and Operations Management, 20(1), pp. 116-128 (2011).
22
22. Zanoni, S., Jaber, M.Y., and Zavanella, L.E. "Vendor managed inventory (vmi) with consignment considering learning and forgetting effects", International Journal of Production Economics, 140(2), pp. 721-730 (2012).
23
23. Glock, C.H. and Jaber, M.Y. "A multi-stage production-inventory model with learning and forgetting effects, rework and scrap", Computers and Industrial Engineering, 64(2), pp. 708-720 (2013).
24
24. Teyarachakul, S., C omez, D., and Tarakci, H. "Steadystate skill levels of workers in learning and forgetting environments: a dynamical system analysis", European Journal of Operational Research, 232(1), pp. 9-21 (2014).
25
25. Barker, L.M. and Nussbaum, M.A. "Fatigue, performance and the work environment: a survey of registered nurses", Journal of Advanced Nursing, 67(6), pp. 1370-1382 (2011).
26
26. Jaber, M.Y. and Glock, C.H. "A learning curve for tasks with cognitive and motor elements", Computers and Industrial Engineering, 64(3), pp. 866-871 (2013).
27
27. Givi, Z.S., Jaber, M.Y., and Neumann, W.P. "Modelling worker reliability with learning and fatigue", Applied Mathematical Modelling, 39(17), pp. 5186- 5199 (2015).
28
28. Asfaw, A., Pana-Cryan, R., and Rosa, R. "The business cycle and the incidence of workplace injuries: evidence from the USA", Journal of Safety Research, 42(1), pp. 1-8 (2011).
29
29. Bevilacqua, M., Ciarapica, F.E., and Mazzuto, G. "Analysis of injury events with fuzzy cognitive maps", Journal of Loss Prevention in the Process Industries, 25(4), pp. 677-685 (2012).
30
30. Frank, A.L. "Injuries related to shiftwork", American Journal of Preventive Medicine, 18(4), pp. 33-36 (2000).
31
31. Lindstrom, L., Kadefors, R., and Petersen, I. "An electromyographic index for localized muscle fatigue", Journal of Applied Physiology: Respiratory, Environmental and Exercise Physiology, 43(4), pp. 750-754 (1977).
32
32. Battini, D., Glock, C.H., Grosse, E.H., Persona, A., and Sgarbossa, F. "Ergo-lot-sizing: an approach to integrate ergonomic and economic objectives in manual materials handling", International Journal of Production Economics, 185, pp. 230-239 (2017).
33
33. Kang, C.W., Ullah, M., and Sarkar, B. "Human errors incorporation in work-in-process group manufacturing system", Scientia Iranica, 24(4), pp. 2050-2061 (2017).
34
34. Cheng, Y.L., Wang, W.T., Wei, C.C., and Lee, K.L. "An integrated lot-sizing model for imperfect production with multiple disposals of defective items",Scientia Iranica, 25(2), pp. 852-867 (2018).
35
35. Besheli, S.F., Keshteli, R.N., Emami, S., and Rasouli, S.M. "A fuzzy dynamic multi-objective, multi-item model by considering customer satisfaction in supply chain", Scientia Iranica, 24(5), pp. 2623-2639 (2017).
36
36. Chen, T.H. and Tsao, Y.C. "Optimal lot-sizing integration policy under learning and rework effects in a manufacturer-retailer chain", International Journal of Production Economics, 155(5), pp. 239-248 (2014).
37
37. Manna, A.K., Das, B., Dey, J.K., and Mondal, S.K. "Multi-item EPQ model with learning effect on imperfect production over fuzzy-random planning horizon", Journal of Management Analytics, 4(1), pp. 80-110 (2016).
38
38. Mahata, G.C. "A production-inventory model with imperfect production process and partial backlogging under learning considerations in fuzzy random environments", Journal of Intelligent Manufacturing, 28(4), pp. 883-897 (2017).
39
39. Grosse, E.H. and Glock, C.H. "Production economics and the learning curve: a meta-analysis", International Journal of Production Economics, 170, pp. 401-412 (2015).
40
40. Glock, C.H. and Jaber, M.Y. "A multi-stage production-inventory model with learning and forgetting effects, rework and scrap", Computers and Industrial Engineering, 64(2), pp. 708-720 (2013).
41
41. Kumar, R.S. and Goswami, A. "EPQ model with learning consideration, imperfect production and partial backlogging in fuzzy random environment", International Journal of Systems Science, 46(8), pp. 1486- 1497 (2015).
42
42. Sturm, J.C., Gronet, C.M., and Gibbons, J.F. "A production-inventory model with imperfect production process and partial backlogging under learning considerations in fuzzy random environments", Journal of Intelligent Manufacturing, 28(4), pp. 1-15 (2017).
43
43. Okogbaa, O.G. An Empirical Model for Mental Work Output and Fatigue, University of Cincinnati, University Microfilms (1983).
44
44. Bechtold, S.E. and Sumners, D.W.L. "Optimal workrest scheduling with exponential work-rate decay", Management Science, 34(4), pp. 547-552 (1988).
45
45. Lindstrom, L., Kadefors, R., Petersen, I. "An electromyographic index for localized muscle fatigue", Journal of Applied Physiology: Respiratory, Environmental and Exercise Physiology, 43(4), pp.750-754 (1977).
46
ORIGINAL_ARTICLE
Multi-period configuration of forward and reverse integrated supply chain networks through transport mode
Today’s competitive business environment has resulted in increasing attention to social responsibilities and customer’s attitudes. Buying and returning have become a common practice for different reasons, including incompleteness or immature failure of the product or its failure to meet the customer’s satisfaction. Before the buying and returning cycle can be handled appropriately, companies need a proper logistics network designed following a proper design strategic. In the present research, a forward and reverse logistics network is proposed for product distribution and collection. The contribution of this paper to the literature is the proposal of a multi-period, multi-echelon, integrated forward and reverse supply chain network design problem with transportation mode selection considered. Different kinds of decisions including the determination of optimum number and locations of facilities, facilities opening time and transportation mode selection among different facilities have been considered in this paper. Due to multi-period nature of the problem, the problem is flexible for future periods. A new mixed integer nonlinear programming model was proposed for the introduced problem considering different levels of facility capacities with the maximum profit objective function. As another contribution, a genetic algorithm was developed to cope with problem’s complexity when the problem size goes large.
https://scientiairanica.sharif.edu/article_21061_75fec80565c11502de9bc15995fa9a14.pdf
2020-04-01
935
955
10.24200/sci.2018.5261.1175
supply chain network design
forward and reverse logistic
multi-period programming
transportation mode
Genetic Algorithm
A.
Eydi
eydi81@yahoo.com
1
Faculty of Engineering, University of Kurdistan, Sanandaj, Iran
LEAD_AUTHOR
S.
Fazayeli
saeed.fazayeli@gmail.com
2
Department of Industrial Engineering, University of Kurdistan, Sanandaj, Iran
AUTHOR
H.
Ghafouri
ghafouri.indeng@yahoo.com
3
Department of Industrial Engineering, University of Kurdistan, Sanandaj, Iran
AUTHOR
References:
1
1. Amin, S.H. and Zhang, G. "A multi-objective facility location model for closed-loop supply chain network under uncertain demand and return", Appl. Math. Model., 37(6), pp. 4165-4176 (2013).
2
2. Lambert, S., Riopel, D., and Abdul-Kader, W. "A reverse logistics decisions conceptual framework", Comput. Ind. Eng., 61(3), pp. 561-581 (2011).
3
3. Lee, D.H. and Dong, M. "A heuristic approach to logistics network design for end-of-lease computer products recovery", Transp. Res. Part E Logist. Transp. Rev., 44(3), pp. 455-474 (2008).
4
4. Lin, J.R., Nozick, L.K., and Turnquist, M.A. "Strategic design of distribution systems with economies of scale in transportation", Ann. Oper. Res., 144(1), pp. 161-180 (2006).
5
5. Du, F. and Evans, G.W. "A bi-objective reverse logistics network analysis for post-sale service", Comput. Oper. Res., 35(8), pp. 2617-2634 (2008).
6
6. Mehdizadeh, E., Afrabandpei, F., and Mohaselafshar, S. "Design of a multi-stage transportation network in a supply chain system: Formulation and efficient solution procedure", Scientia Iranica., 20(6), pp. 2188- 2200 (2013).
7
7. Mirmajlesi, S.R. and Shafaei, R. "An integrated approach to solve a robust forward/reverse supply chain for short lifetime products", Computers & Industrial Engineering., 97, pp. 222-239 (2016).
8
8. Taleizadeh, A.A. and Sadeghi, R. "Pricing strategies in the competitive reverse supply chains with traditional and e-channels: A game theoretic approach", International Journal of Production Economics, 215, pp. 48-60 (2019).
9
9. Fathollahi Fard, A.M. and Hajaghaei-Keshteli, M. "A tri-level location-allocation model for forward/reverse supply chain", Applied Soft Computing., 62, pp. 328- 346 (2018).
10
10. Badri, H., Bashiri, M., and Hejazi, T.H. "Integrated strategic and tactical planning in a supply chain network design with a heuristic solution method", Comput. Oper. Res., 40(4), pp. 1143-1154 (2013).
11
11. Nobari, A. and Kheirkhah, A. "Integrated and dynamic design of sustainable closed-loop supply chain network considering pricing", Scientia Iranica, 25(1), pp. 410-430 (2018).
12
12. Cardoso, S.R., Barbosa-Povoa, A.P.F.D.D., and Relvas, S. "Design and planning of supply chains with integration of reverse logistics activities under demand uncertainty", Eur. J. Oper. Res., 226(3), pp. 436-451 (2013).
13
13. Pedram, A., Yusoff, N.B., and Udoncy, O.E. "Integrated forward and reverse supply chain: A tire case study", Waste Management., 60, pp. 460-470 (2017).
14
14. Lieckens, K. and Vandaele, N. "Reverse logistics network design with stochastic lead times", Comput. Oper. Res., 34(2), pp. 395-416 (2007).
15
15. Aghezzaf, E. "Capacity planning and warehouse location in supply chains with uncertain demands", J. Oper. Res. Soc., 56(4), pp. 453-462 (2005).
16
16. Shaharudin, M.R., Govindan, K., and Zailani, S. "Product return management: Linking product returns, closed-loop supply chain activities and the effectiveness of the reverse supply chains", Journal of Cleaner Production., 149(15), pp. 1144-1156 (2017).
17
17. Lowe, T.J., Wendell, R.E., and Hu, G. "Screening location strategies to reduce exchange rate risk", Eur. J. Oper. Res., 136(3), pp. 573-590 (2002).
18
18. Martel, A., Beauregard, R., and Vila, D. "Designing logistics networks in divergent process industries: A methodology and its application to the lumber industry", Int. J. Prod. Econ., 102(2), pp. 358-378 (2006).
19
19. Karabakal, N., Gunal, A., and Ritchie, W. "Supplychain analysis at Volkswagen of America", Interfaces., 30(4), pp. 46-55 (2000).
20
20. Ambrosino, D. and Scutella, M.G. "Distribution network design: new problems and related models", Eur. J. Oper. Res., 165(3), pp. 610-624 (2005).
21
21. Avittathur, B., Shah, J., and Gupta, O.K. "Distribution centre location modelling for differential sales tax structure", Eur. J. Oper. Res., 162(1), pp. 191-205 (2005).
22
22. Daskin, M.S., Coullard, C.R., and Shen, Z.J.M. "An inventory-location model: Formulation, solution algorithm and computational results", Ann. Oper. Res., 110(1-4), pp. 83-106 (2002).
23
23. Jang, Y.J., Jang, S.Y., and Chang, B.M. "A combined model of network design and production/distribution planning for a supply network", Comput. Ind. Eng., 43(1), pp. 263-281 (2002).
24
24. Melo, M.T., Nickel, S., and Saldanha da Gama, F. "Dynamic multi-commodity capacitated facility location: a mathematical modeling framework for strategic supply chain planning", Comput. Oper. Res., 33(1), pp. 181-208 (2006).
25
25. Syam, S.S. "A model and methodologies for the location problem with logistical components", Comput. Oper. Res., 29(9), pp. 1173-1193 (2002).
26
26. Van Weele, A.J. "Purchasing & supply chain management: analysis, strategy, planning and practice", Cengage Learning EMEA (2009).
27
27. Cordeau, J.F., Pasin, F., and Solomon, M.M. "An integrated model for logistics network design", Ann. Oper. Res., 144(1), pp. 59-82 (2006).
28
28. Yan, H., Yu, Z., and Cheng, T.C.E. "A strategic model for supply chain design with logical constraints: formulation and solution", Comput. Oper. Res., 30(14), pp. 2135-2155 (2003).
29
29. Zhou, W.Q. and Chen, L. "Research on the inventory control of the remanufacturing reverse logistics based on the quantitative examination", Scientia Iranica, 24(2), pp. 741-750 (2017).
30
30. Wilhelm, W., Liang, D., and Rao, B. "Design of international assembly systems and their supply chains under NAFTA", Transp. Res. Part E Logist., 41(6), pp. 467-493 (2005).
31
31. Olivares-Benitez, E., Rios-Mercado, R.Z., and Gonzalez-Velarde, J.L. "A supply chain design problem with facility location and bi-objective transportation choices", Artic. Metrics, 20(3), pp. 729-753 (2010).
32
32. Heydari, J., Govindan, K., and Jafari, A. "Design of a multi-stage transportation network in a supply chain system: Formulation and efficient solution procedure", Reverse and closed loop supply chain coordination by considering government role., 52, pp. 379-398 (2017).
33
33. Giri, B.C., Chakraborty, A., and Maiti, T. "Pricing and return product collection decisions in a closed-loop supply chain with dual-channel in both forward and reverse logistics", Journal of Manufacturing Systems., 42, pp. 104-123 (2017).
34
34. Khakim Habibi, M.K., Olga, B., and Van-Dat, C. "Collection-disassembly problem in reverse supply chain", International Journal of Production Economics., 183, pp. 334-344 (2017).
35
35. Butzer, S., Schotz, S., and Petroschke, M. "Development of a performance measurement system for international reverse supply chains", procedia CIRP., 61, pp. 251-256 (2017).
36
36. Goh, M., Lim, J.Y.S., and Meng, F. "A stochastic model for risk management in global supply chain networks", Eur. J. Oper. Res., 182(1), pp. 164-173 (2007).
37
37. Lu, Z. and Bostel, N. "A facility location model for logistics systems including reverse flows: The case of remanufacturing activities", Comput. Oper. Res., 34(2), pp. 299-323 (2007).
38
38. Uster, H., Easwaran, G., and Akcali, E. Benders decomposition with alternative multiple cuts for a multi-product closed-loop supply chain network design model", Navel Res. Logistic., 54(6), pp. 890-907 (2007).
39
39. Min, H. and Ko, H.J. "The dynamic design of a reverse logistics network from the perspective of thirdparty logistics service providers", Int. J. Prod. Econ., 113(1), pp. 176-192 (2008).
40
40. Lee, C.K.M. and Chan, T.M. "Development of RFIDbased reverse logistics system", Expert Syst. Appl., 36(5), pp. 9299-9307 (2009).
41
41. Trappey, A.J.C., Trappey, C.V., and Wu, C.R. "Genetic algorithm dynamic performance evaluation for RFID reverse logistic management", Expert Syst. Appl., 37(11), pp. 7329-7335 (2010).
42
42. Fakhrzad, M.B. and Moobed, M. "A GA model development for decision making under reverse logistics", Int. J. Ind. Eng., 21(4), pp. 211-220 (2010).
43
43. Zegordi, S.H., Abadi, I.N.K., and Nia, M.A.B. "A novel genetic algorithm for solving production and transportation scheduling in a two-stage supply chain", Comput. Ind. Eng., 58(3), pp. 373-381 (2010).
44
44. Modiri-Delshad, M., Kaboli, S.H.A., and Taslimi- Renani, E. "Backtracking search algorithm for solving economic dispatch problems with valve-point effects and multiple fuel options", Energy., 116, pp. 637-649 (2016).
45
45. Kaboli, S.H.A., Selvaraj, J., and Rahim, N.A. "Longterm electric energy consumption forecasting via artificial cooperative search algorithm", Energy., 115, pp. 857-871 (2016).
46
46. Rafieerad, A.R., Bushroa, A.R., and Nasiri-Tabrizi, B. "Toward improved mechanical, tribological, corrosion and in-vitro bioactivity properties of mixed oxide nanotubes on Ti-6Al-7Nb implant using multiobjective PSO", Journal of the Mechanical Behavior of Biomedical Materials, 69, pp. 1-18 (2017).
47
47. Kaboli, S.H.A., Fallahpour, A., and Selvaraj, J. "Longterm electrical energy consumption formulating and forecasting via optimized gene expression programming", Energy., 126, pp. 144-164 (2017).
48
48. Kaboli, S.H.A., Selvaraj, J., and Rahim, N.A. "Rainfall optimization algorithm: a population based algorithm for solving constrained optimization problems", Journal of Computational Science., 19, pp. 31-42 (2017).
49
49. Sebtahmadi, S.S., Borhan Azad, H., and Kaboli, S.H.A. "A PSO-DQ current control scheme for performance enhancement of Z-source matrix converter to drive IM fed by abnormal voltage", in IEEE Transactions on Power Electronics, 99, pp. 1666-1681 (2018).
50
50. Mansouri, M., Kaboli, S.H.A., and Ahmadian, J. "A hybrid Neuro-Fuzzy-PI speed controller for BLDC enriched with an integral steady state error eliminator", Control System, Computing and Engineering (ICCSCE), IEEE International Conference on, IEEE (2012).
51
51. Modiri-Delshad, M., Koohi-Kamali, S., and Taslimi, E. "Economic dispatch in a microgrid through an iterated-based algorithm", Clean Energy and Technology (CEAT), IEEE Conference on, IEEE (2013).
52
52. Krarup, J. and Pruzan, P.M. "The simple plant location problem: survey and synthesis", Eur. J. Oper. Res., 12(1), pp. 36-81 (1983).
53
ORIGINAL_ARTICLE
Innovation and environmental performance: An empirical study of 31 cities in China
After its rapid economic growth, China is facing a very serious problem of atmospheric pollution with major long-term atmospheric problems appearing in large cities. Air pollution not only affects people’s normal lives, but also has a greater negative impact on their bodies, causing diseases, impacting productivity, and influencing people’s creativity. Due to past articles, the discussion on the efficiency of innovation and research has not been considered the impact of environmental variables. This study combines energy consumption, economics, environmental variables and innovative research and development capabilities to analyze and explore the relationship between consumption, environment, economy, and innovative R&D capabilities, this is the feature of this article.This study employ the Dynamic Data Envelopment Analysis (DEA) model to calculate energy consumption efficiency, R&D input efficiency, innovation patent output efficiency, carbon dioxide emission efficiency, and AQI efficiency of each city and further compare each city to find their space for improvement.The results of the study show that 10 cities have a total efficiency score of 1, implying the improvement space is already 0, whereas the total efficiency scores of the other 21 cities mean there is still much room for improvement, and there are big differences among the cities.
https://scientiairanica.sharif.edu/article_21191_c2b2932f402ddc79ed14d0c1e4795969.pdf
2020-04-01
956
969
10.24200/sci.2018.50934.1927
AQI efficiency
energy efficiency
re-sampling
CO2 efficiency
innovation efficiency
SBM DEA
Y.
Li
lynn177@126.com
1
School of Business, Sichuan University, Wangjiang Road No. 29, Chengdu, 610064, China, P.R.
AUTHOR
Y.H.
Chiu
echiu@scu.edu.tw
2
Department of Economics, Soochow University, 56, Kueiyang St., Sec. 1, Taipei 100, Taiwan, R.O.C.
LEAD_AUTHOR
L.C.
Lu
ryan@phanteks.com
3
Department of Economics, Soochow University, 56, Kueiyang St., Sec. 1, Taipei 100, Taiwan, R.O.C.
AUTHOR
H.
Liu
noah_liuhx@foxmail.com
4
School of Business, Sichuan University, Wangjiang Road No. 29, Chengdu, 610064, China, P.R.
AUTHOR
References:
1
1. Hu, J.L. andWang, S.C. "Total factor energy efficiency of regions in China", Energy Policy, 34(17), pp. 3206- 3217 (2006).
2
2. Kumar, S. "Environmentally sensitive productivity growth: A global analysis using Malmquist-Luenberger index", Ecological Economics, 56, pp. 280-293 (2006).
3
3. Gomes, E.G. and Lins, M.P.E. "Modeling undesirable outputs with zero sum gains data envelopment analysis models", Journal of the Operational Research Society, 59, pp. 616-623 (2007).
4
4. Zhou, P., Ang, B.W., and Poh, K.L. "Measuring environmental performance under different environmental DEA technologies", Energy Economics, 30(1), pp. 1- 14 (2008).
5
5. Yeh, T.-l., Chen, T.-y., and Lai, P.-y. "A comparative study of energy utilization efficiency between Taiwan and China", Energy Policy, 38, pp. 2386-2394 (2010).
6
6. Zhang, X.P., Cheng, X.M., Yuan, J.H., and Gao, X.J. "Total-factor energy efficiency in developing countries", Energy Policy, 39, pp. 644-650 (2011).
7
7. Choi, Y., Zhang, N., and Zhou, P. "Efficiency and abatement costs of energy-related CO2 emissions in China: A slacks-based efficiency measure", Applied Energy, 98, pp. 198-208 (2012).
8
8. Wang, K., Wei, Y.-M., and Zhang, X. "Energy and emissions efficiency patterns of Chinese regions: A multi-directional efficiency analysis", Applied Energy, 104, pp. 105-116 (2013).
9
9. Lin, B. and Yang, L. "Efficiency effect of changing investment structure on China's power industry", Renewable and Sustainable Energy Reviews, 39, pp. 403- 411 (2014).
10
10. Zhou, C., Chung, W., and Zhang, Y. "Measuring energy efficiency performance of China's transport sector: A data envelopment analysis approach", Expert System with Application, 41(2), pp. 709-722 (2014).
11
11. Pan, X., Liu. Q., and Peng, X. "Spatial club convergence of regional energy efficiency in China", Ecological Indicators, 51, pp. 25-30 (2015).
12
12. Wang, Z. and Feng, C. "A performance evaluation of the energy, environmental, and economic efficiency and productivity in China: an application of global data envelopment analysis", Applied. Energy, 147, pp. 617- 626 (2015).
13
13. Wu, J., Lin, L., Sun, J., and Ji, X. " A comprehensive analysis of China's regional energy saving and emission reduction efficiency : from production and treatment perspectives", Energy Policy, 84, pp. 166-178 (2015).
14
14. Liou, J.-L., Chiu, C.-R., Huang, F.-M., and Liu, W.-Y. "Analyzing the relationship between CO2 emission and economic efficiency by a relaxed two-stage DEA model", Aerosol and Air Quality Research, 15, pp. 694-701 (2015).
15
15. Meng, F., Su, B., Thomson, E., Zhou, D., and Zhou, P. "Measuring China's regional energy and carbon emission efficiency with DEA models: A survey", Applied Energy, 183, pp. 1-21 (2016).
16
16. Wang, Q., Chiu, Y.H., and Chiu, C.R. "Non-radial metafrontier approach to identify Carbon Emission Performance and intensity", Renewable and Sustainable Energy Reviews, 69, pp. 664-672 (2017).
17
17. Du, K., Xie, Ch., and Ouyang, X. "A comparison of carbon dioxide (CO2) emission trends among provinces in China", Renewable and Sustainable Energy Reviews, 73, pp. 19-35 (2017).
18
18. Feng, Ch., Zhang, H., and Huang, J.-B. "The approach to realizing the potential of emissions reduction in China: An implication from data envelopment analysis", Renewable and Sustainable Energy Reviews, 71, pp. 859-872 (2017).
19
19. Vardanyan, M. and Noh, D. "Approximating pollution abatement costs via alternative specifications of a multi-output production technology: a case of the US electric utility industry", Journal of Environmental Management, 80, pp. 177-190 (2006).
20
20. Rao, X., Wu, J., and Zhang, Z. "Energy efficiency and energy saving potential in China: an analysis based on slacks-based measure model", Computers and Industrial Engineering, 63(3), pp. 578-584 (2012).
21
21. Long, X., Oh, K., and Cheng, G. "Are stronger environmental regulations effective in practice? The case of China's accession to the WTO", Journal of Cleaner Production, 39, pp. 161-167 (2013).
22
22. Bi, G.B., Song, W., and Zhou, P. "Does environmental regulation affect energy efficiency in China's thermal power generation? Empirical evidence from a slacksbased DEA model", Energy Policy, 66, pp. 537-546 (2014).
23
23. Bian, Y., Liang, N., and Xu, H. "Efficiency evaluation of Chinese regional industrial systems with undesirable factors using a two-stage slacks-based measure approach", Journal of Cleaner Production, 87, pp. 348-356 (2015).
24
24. Wang, Q., Hang, Y., Sun, L., and Zhao, Z. "Twostage innovation efficiency of new energy enterprises in China: A non-radial DEA approach", Technological Forecasting and Social Change, 112, pp. 254-261 (2016).
25
25. Li, H., You, Sh., Zhang, H., Zhang, W., Zheng, X., Jia, J., Ye, T., and Zou, L. "Modelling of AQI related to building space heating energy demand based on big data analytics", Applied Energy, 203, pp. 57-71 (2017).
26
26. Li, H., You, Sh., Zhang, H., Zhang, W., and Zou, L. "Investigating the environmental quality deterioration and human health hazard caused by heating emissions", Science of the Total Environment, 629, pp. 1209-1222 (2018).
27
27. Xu, X., Gonzalez, J.E., Shen, Sh., Miao, Sh., and Dou, J. "Impacts of urbanization and air pollution on building energy demands - Beijing case study", Applied Energy, 225, pp. 98-105 (2018).
28
28. Tong, Zh., Chen, Y., Malkawi, A., Liu, Zh., and Freeman, R.B. "Energy saving potential of natural ventilation in China: The impact of ambient air pollution", Applied Energy, 179, pp. 660-668 (2016).
29
29. Bidokhti, A.A., Shariepourb , Z., and Sehatkashanic, S. "Some resilient aspects of urban areas to air pollution and climate change, case study: Tehran, Iran", Scientia Iranica, Transactions A, Civil Engineering, 23(5), 1994-2004 (2016).
30
30. Ahmadzadehtalatapeh, M. "Solar assisted desiccant evaporative cooling system for office buildings in Iran: An annual simulation model", Scientia Iranica, Transactions B, Mechanical Engineering, 25(1), pp. 280-298 (2018).
31
31. Liao, Zh., Gao, M., Sun, J., and Fan S, "The impact of synoptic circulation on air quality and pollutionrelated human health in the Yangtze River Delta region", Science of the Total Environment, 608, pp. 838-846 (2017).
32
32. Li, H., You, Sh., Zhang, H., Zhang, W., Lee, W.-L., Ye, T., and Zou, L. "Analyzing the impact of heating emissions on air quality index based on principal component regression", Journal of Cleaner Production, 171(10), pp. 1577-1592 (2018).
33
33. Khreis, H., Hooghf, K.de., and Nieuwenhuijsen, M.J. "Full-chain health impact assessment of traffic-related air pollution and childhood asthma", Environment International, 114, pp. 365-375 (2018).
34
34. Maji, K., Dikshit, A.K., Arora, M., and Deshpande, A. "Estimating premature mortality attributable to PM2.5 exposure and benefit of air pollution control policies in China for 2020", Science of the Total Environment, 612, pp. 683-693 (2018).
35
35. Laitinen, E.K. "A dynamic performance measurement system: evidence from small Finnish technology companies", Scandinavian Journal of Management, 18, pp. 65-99 (2002).
36
36. Urpelainen, J. "Export orientation and domestic electricity generation: Effects on energy efficiency innovation in select sectors", Energy Policy, 39(9), pp. 5638- 5646 (2011).
37
37. Bai, J. and Li, J. "Regional innovation efficiency in China: The role of local government", Innovation: Management, Policy & Practice, 13(2), pp. 142-153 (2011).
38
38. Chen, K. and Guan, J. "Two-stage innovation efficiency of new energy enterprises in China: A nonradial DEA approach", Regional Studies, 46, pp. 341- 355 (2012).
39
39. Bai, J. "On regional innovation efficiency: Evidence from panel data of China's different provinces", Cambridge, 47(5), pp. 773-776 (2013).
40
40. Moon, H.S. "The relative efficiency analysis of innovation activities with uncertainty: The case of Korean electronic equipment industry", Innovation: Management, Policy & Practice, 15(3), pp. 305-314 (2013).
41
41. Chen, J. and Meng, L. "Research on technological innovation efficiency of China's high-tech industry based on network SBM model and DEA window analysis", Proceedings of 2013 4th International Asia Conference on Industrial Engineering and Management Innovation (IEMI2013), Springer Berlin Heidelberg (2014).
42
42. Chen, K. and Kou, M. "State of an innovation system: theoretical and empirical advance towards an innovation efficiency index", The Annals of Regional Science, 52(2), pp. 627-657 (2014).
43
43. Suh, Y. and Kim, M.S. "State of an innovation system: Theoretical and empirical advance towards an innovation efficiency index", International Journal of Services Technology and Management, 20(4-6), pp. 267-289 (2015).
44
44. Wan, L., Luo, B., Li, T., Wang, Sh., and Liang, L. "Effects of technological innovation on eco-efficiency of industrial enterprises in China", Nankai Business Review International, 6(3), pp. 226-239 (2015).
45
45. Kou, M., Chen, K., and Wang, S. "Measuring efficiencies of multi-period and multi-division systems associated with DEA: An application to OECD countries' national innovation systems", Expert Systems with Applications, 46, pp. 494-510 (2016).
46
46. Huang, D., Lu, D., and Luo, J.H. "Corporate innovation and innovation efficiency: does religion matter?", Nankai Business Review International, 7(2), pp. 150- 191 (2016).
47
47. Greco, M., Grimaldi, M., and Cricelli, L. "Hitting the nail on the head: Exploring the relationship between public subsidies and open innovation efficiency", Technological Forecasting and Social Change, 118, pp. 213- 225 (2017).
48
48. Chen, W. and Lei, Y. "The impacts of renewable energy and technological innovation on environmentenergy- growth nexus: New evidence from a panel quantile regression", Renewable Energy, 123, pp. 1- 14 (2018).
49
49. Tone, K. "Resampling in DEA", GRIPS Discussion Paper, National Graduate Institute for Policy Studies, pp. 13-23 (2013).
50
50. Tone, K. and Tsutsui, M. "Dynamic DEA: A slacksbased measure approach", Omega, 38, pp. 145-156 (2010).
51
51. Simar, L. and Wilson, P.W. "Sensitivity analysis of efficiency scores: How to bootstrap in nonparametric frontier models", Management Science, 44(1), pp. 49- 61 (1998).
52
52. Simar, L. and Wilson, P.W. "A General methodology for bootstrapping in non-parametric frontier models", Journal of Applied Statistics, 27(6), pp. 779-802 (2000).
53
53. Tziogkidis, P. "Bootstrap DEA and hypothesis testing", Cardiff Economics Working Papers, No. E2012/18 (2012).
54
54. Charnes, A., Cooper, W.W., and Rhodes, E. "Measuring the efficiency of decision making units", European Journal of Operational Research, 2(6), pp. 429-444 (1978).
55
55. Banker, R.D., Charnes, A., and Cooper, W.W. "Some models for estimating technical and scale inefficiencies in data envelopment analysis", Management Science, 30(9), pp. 1078-1092 (1984).
56
56. Tone, K. "A slacks-based measure of efficiency in data envelopment analysis", European Journal of Operational Research, 130, pp. 498-509 (2001).
57
ORIGINAL_ARTICLE
Presenting a series-parallel redundancy allocation problem with multi-state components using recursive algorithm and meta-heuristic
Redundancy Allocation Problem (RAP) is one of the most important problems in the field of reliability. This problem aims to increase system reliability, under constraints such as cost, weight, etc. In this paper, we work on a system with series-parallel configuration and multi-state components. To draw the problem nearer to real condition, we merge this problem with discount levels in purchasing components. For calculating sub-systems reliability, we used recursive algorithm. Because RAP belongs to Np. Hard problems, for optimizing the presented model a new Genetic algorithm (GA) was used. The algorithm parameters tuned using Response surface methodology (RSM) and for validation of GA an enumeration method was used.
https://scientiairanica.sharif.edu/article_21134_7c1c9d9c2eb3517a45f6fa0e954fc765.pdf
2020-04-01
970
982
10.24200/sci.2018.51176.2040
Reliability optimization
Multi-state components
RAP
Recursive algorithm
GA
M.
Sharifi
m.sharifi@qiau.ac.ir
1
Faculty of Industrial & Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
LEAD_AUTHOR
M.
Saadvandi
saadvandi.m@qiau.ac.ir
2
Faculty of Industrial & Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran.
AUTHOR
M. R.
Shahriari
shahriari_mr@gmail.com
3
Faculty of Management & Accounting, South Tehran Branch, Islamic Azad University, Tehran, Iran.
AUTHOR
References:
1
1. Fyffe, D.E., Hines, W.W., and Lee, N.K. "System reliability allocation and a computational algorithm", IEEE Transactions on Reliability, 17(2), pp. 64-69 (1968).
2
2. Ida, K. "System reliability optimization with several failure modes by genetic algorithm", In Proc. of 16th International Conf. on Comp. & Indust. Engg. (1994).
3
3. Yokota, T., Gen, M., and Ida, K. "System reliability of optimization problems with several failure modes by genetic algorithm", Japanese Journal of Fuzzy Theory and Systems, 7(1), pp. 117-135 (1995).
4
4. Coit, D.W. and Smith, A.E. "Redundancy allocation to maximize a lower percentile of the system time-tofailure distribution", IEEE Transactions on Reliability, 47(1), pp. 79-87 (1998).
5
5. Coit, D.W. and Smith, A.E. "Penalty guided genetic search for reliability design optimization", Computers & Industrial Engineering, 30(4), pp. 895-904 (1996).
6
6. Coit, D.W. and Smith, A.E. "Reliability optimization of series-parallel systems using a genetic algorithm", IEEE Transactions on Reliability, 45(2), pp. 254-260 (1996).
7
7. Coit, D.W. and Smith, A.E. "Optimization approaches to the redundancy allocation problem for seriesparallel systems", In Fourth Industrial Engineering Research Conference Proceedings (1995).
8
8. Coit, D.W. "Cold-standby redundancy optimization for nonrepairable systems", Iie Transactions, 33(6), pp. 471-478 (2001).
9
9. Tavakkoli-Moghaddam, R., Safari, J., and Sassani, F. "Reliability optimization of series-parallel systems with a choice of redundancy strategies using a genetic algorithm", Reliability Engineering & System Safety, 93(4), pp. 550-556 (2008).
10
10. Tavakkoli-Moghaddam, R. and Safari, J. "A new mathematical model for a redundancy allocation problem with mixing components redundant and choice of redundancy strategies", Applied Mathematical Sciences, 45(1), pp. 2221-2230 (2007).
11
11. Chambari, A., Najafi, A.A., Rahmati, S.H.A., et al. "An efficient simulated annealing algorithm for the redundancy allocation problem with a choice of redundancy strategies", Reliability Engineering & System Safety, 119, pp. 158-164 (2013).
12
12. Zaretalab, A., Hajipour, V., Sharifi, M., et al. "A knowledge-based archive multi-objective simulated annealing algorithm to optimize series-parallel system with choice of redundancy strategies", Computers & Industrial Engineering, 80, pp. 33-44 (2015).
13
13. Li, W. and Zuo, M.J. "Reliability evaluation of multistate weighted k-out-of-n systems", Reliability Engineering & System Safety, 93(1), pp. 160-167 (2008).
14
14. Guilani, P.P., et al. "Reliability evaluation of nonreparable three-state systems using Markov model and its comparison with the UGF and the recursive methods", Reliability Engineering & System Safety, 129, pp. 29-35 (2014).
15
15. Guilani, P.P., Sharifi, M., Niaki, S.T.A., et al. Redundancy allocation problem of a system with threestate components: A genetic algorithm", International Journal of Engineering, 27(11), pp. 1663-1672 (2014).
16
16. Soltani, R., Sadjadi, S.J., and Tofigh, A.A. "A model to enhance the reliability of the serial parallel systems with component mixing", Applied Mathematical Modelling, 38(3), pp. 1064-1076 (2014).
17
17. Garg, H., Rani, M., and Sharma, S. "An efficient two phase approach for solving reliability-redundancy allocation problem using artificial bee colony technique", Computers & Operations Research, 40(12), pp. 2961- 2969 (2013).
18
18. Levitin, G., Xing, L., Ben-Haim, H., et al. "Reliability of series-parallel systems with random failure propagation time", IEEE Transactions on Reliability, 62(3), pp. 637-647 (2013).
19
19. Maatouk, I., Ch^atelet, E., and Chebbo, N. "Availability maximization and cost study in multi-state systems", In Reliability and Maintainability Symposium (RAMS), Proceedings-Annual (2013).
20
20. Gago, J., Hartillo, I., Puerto, J., et al. "Exact cost minimization of a series-parallel reliable system with multiple component choices using an algebraic method", Computers & Operations Research, 40(11), pp. 2752-2759 (2013).
21
21. Ebrahimipour, V. Asadzadeh, S., and Azadeh, A. "An emotional learning-based fuzzy inference system for improvement of system reliability evaluation in redundancy allocation problem", The International Journal of Advanced Manufacturing Technology, 66(9- 12), pp. 1-16 (2013).
22
22. Liu, Y., Huang, H-Z., Wang, Z., et al. "A joint redundancy and imperfect maintenance strategy optimization for multi-state systems", IEEE Transactions on Reliability, 62(2), pp. 368-378 (2013).
23
23. Khalili-Damghani, K., Abtahi, A.R., and Tavana, M. "A decision support system for solving multi-objective redundancy allocation problems", Quality and Reliability Engineering International, 30(8), pp. 1249-1262 (2014).
24
24. Sharifi, M., Cheragh, G., Dashti Maljaii, K., et al. "Reliability optimization of a series-parallel k-out-of-n system with failure rate depending on working component of system", International Journal of Industrial Engineering, 22(4), pp. 438-453 (2015).
25
25. Mousavi, S.M., Alikar, N., Niaki, S.T.A., et al. "Two tuned multi-objective meta-heuristic algorithms for solving a fuzzy multi-state redundancy allocation problem under discount strategies", Applied Mathematical Modelling, 39(22), pp. 6968-6989 (2015).
26
26. Miriha, M., Niaki, S.T.A., Karimi, B., et al. "Biobjective reliability optimization of switch-mode kout- of-n series-parallel systems with active and cold standby components having failure rates dependent on the number of components", Arabian Journal for Science and Engineering, 42(12), pp. 5305-320 (2017).
27
27. Guilani, P.P., Zaretalab, A., and Niaki, S.T. "A biobjective model to optimize reliability and cost of kout- of-n series-parallel systems with tri-state components", Scientia Iranica, Transactions E, Industrial Engineering, 24(3), pp. 1585-602 (2017).
28
28. Hadipour, H., Amiri, M., and Sharifi, M. "Redundancy allocation in series-parallel systems under warm standby and active components in repairable subsystems", Reliability Engineering & System Safety, 192, 106048 (2019).
29
29. Pourkarim Guilani, P., Azimi, P., and Sharifi, M. Redundancy allocation problem with a mixed strategy for a system with k-out-of-n subsystems and timedependent failure rates based on Weibull distribution: An optimization via simulation approach", Scientia Iranica, 26(2), pp. 1023-1038 (2019).
30
30. Holland, J.H., Adaptation in Natural and Artificial Systems. An Introductory Analysis with Application to Biology, Control, and Artificial Intelligence, Ann Arbor, MI: University of Michigan Press (1975).
31
ORIGINAL_ARTICLE
Project safety evaluation by a new soft computing approach-based last aggregation hesitant fuzzy complex proportional assessment in construction industry
In recent years, the implementation of safety management has been increased in construction projects by institutions, and many companies have recognized environmental and social effects of injuries at project work systems. In this regard, a novel decision model is presented based on a new version of complex proportional assessment method with last aggregation under a hesitant fuzzy environment. The decision makers (DMs) assign their opinions by hesitant linguistic variables that are converted to the hesitant fuzzy elements. Also, the DMs’ judgments are aggregated in last step of decision making to decrease information loss. Since weights of the DMs or professional safety experts and evaluation criteria are not equal in practice, a new version of hesitant fuzzy compromise solution method is proposed to compute these weights. In addition, the criteria weights are determined based on proposed hesitant fuzzy entropy method. A real case study in developing countries about the safety of construction projects is considered to indicate the suitability and applicability of the proposed new hesitant fuzzy decision model with last aggregation approach. In addition, an illustrative example is prepared to show that the proposed approach is suitable and reliable in larger size safety problems
https://scientiairanica.sharif.edu/article_4439_0589ca85981cb89803b845d9b95bd70c.pdf
2020-04-01
983
1000
10.24200/sci.2017.4439
Safety evaluation
Construction Projects
Soft computing
group decision making
complex decision analysis
hesitant fuzzy sets (HFSs)
H.
Gitinavard
1
Young Researchers and Elite Club, South Tehran Branch, Islamic Azad University, Tehran, Iran
AUTHOR
S.M.
Mousavi
mousavi.sme@gmail.com
2
Department of Industrial Engineering, Faculty of Engineering, Shahed University, Tehran, Iran
AUTHOR
B.
Vahdani
b.vahdani@gmail.com
3
Department of Industrial Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran.
AUTHOR
A.
Siadat
4
Laboratoire de Conception, Fabrication Commande, Arts et Métier Paris Tech, Centre de Metz, Metz, France
LEAD_AUTHOR
References:
1
1. Janic, M. "An assessment of risk and safety in civil aviation", Journal of Air Transport Management, 6(1), pp. 43-50 (2000).
2
2. Odegard, S. "Safety management in civil aviation: A useful method for improved safety in medical care", Safety Science Monitor, 4(1), pp. 1-12 (2000).
3
3. Malekly, H., Mousavi, S.M., and Hashemi, H. "A fuzzy integrated methodology for evaluating conceptual bridge design", Expert Systems with Applications, 37(7), pp. 4910-4920 (2010).
4
4. Bailey, N. "Risk perception and safety management systems in the global maritime industry", Policy and Practice in Health and Safety, 4(2), pp. 59-75 (2006).
5
5. Bhattacharya, S., Impact of the ISM Code on the Management of Occupational Health and Safety in the Maritime Industry, Cardiff University (2009).
6
6. Horlick-Jones, T. "Reasoning about safety management policy in everyday terms: a pilot study in citizen engagement for the UK railway industry", Journal of Risk Research, 11(6), pp. 697-718 (2008).
7
7. Kudla, N. and Majumdar, A., Developing and Testing Model of Data Quality for Safety Management Information Systems: Exploratory Study in British Railway Industry, in Transportation Research Board, 92nd Annual Meeting (2013).
8
8. Mousavi, S.M., Mirdamadi, S., Siadat, A., Dantan, J., and Tavakkoli-Moghaddam, R. "An intuitionistic fuzzy grey model for selection problems with an application to the inspection planning in manufacturing firms", Engineering Applications of Artificial Intelligence, 39, pp. 157-167 (2015).
9
9. Vahdani, B., Mousavi, S.M., and Tavakkoli- Moghaddam, R. "Group decision making based on novel fuzzy modified TOPSIS method", Applied Mathematical Modelling, 35(9), pp. 4257-4269 (2011).
10
10. Vahdani, B., Mousavi, S.M., Tavakkoli-Moghaddam, R., Ghodratnama, A., and Mohammadi, M. "Robot selection by a multiple criteria complex proportional assessment method under an interval-valued fuzzy environment", International Journal of Advanced Manufacturing Technology, 73(5-8), pp. 687-697 (2014).
11
11. XIAO-ming, W. and LIU, X.-Y. "Safety system management and safety information management in major transportation construction projects", Safety and Environmental Engineering, 3, p. 015 (2011).
12
12. Guo, H., Li, H., and Li, V. "VP-based safety management in large-scale construction projects: A conceptual framework", Automation in Construction, 34, pp. 16-24 (2013).
13
13. Mousavi, S.M., Tavakkoli-Moghaddam, R., Azaron, A., Mojtahedi, S., and Hashemi, H. "Risk assessment for highway projects using jackknife technique", Expert Systems with Applications, 38(5), pp. 5514-5524 (2011).
14
14. Hashemi, H., Mousavi, S.M., and Mojtahedi, S.M.H. "Bootstrap technique for risk analysis with interval numbers in bridge construction projects", Journal of Construction Engineering and Management, 137(8), pp. 600-608 (2011).
15
15. Vahdani, B., Mousavi, S.M., Hashemi, H., Mousakhani, M., and Tavakkoli-Moghaddam, R. "A new compromise solution method for fuzzy group decision-making problems with an application to the contractor selection", Engineering Applications of Artificial Intelligence, 26(2), pp. 779-788 (2013).
16
16. Schinas, O. "Examining the use and application of multi-criteria decision making techniques in safety assessment", in International Symposium on Maritime Safety, Security and Environmental Protection (2007).
17
17. Fazil, A., Rajic, A., Sanchez, J., and McEwen, S. "Choices, choices: the application of multi-criteria decision analysis to a food safety decision-making problem", Journal of Food Protection, 71(11), pp. 2323-2333 (2008).
18
18. Jozi, A.S. and Pouriyeh, A.A. "Health-safety and environmental risk assessment of power plants using multi criteria decision making method", Chemical Industry and Chemical Engineering Quarterly, 17(4), pp. 437- 449 (2011).
19
19. Mangalathu, S.G., Shanmugam, N.S., Sankaranarayanasamy, K., Ramesh, T., and Muthukumar, K. "System safety in LPG fired furnace - A multi criteria decision making technique", Advances in Production Engineering & Management, 7(2), pp. 123-134 (2012).
20
20. Zadeh, L.A. "Fuzzy sets", Information and Control, 8(3), pp. 338-353 (1965).
21
21. Kahraman, C., Onar, S.C., and Oztaysi, B. "Fuzzy multicriteria decision-making: a literature review", International Journal of Computational Intelligence Systems, 8(4), pp. 637-666 (2015).
22
22. Bao, Q. "Multi-criteria decision making techniques for combining different sets of road safety performance indicators into an overall index", Master's Thesis of Transportation Science at Hasselt University (2010).
23
23. Mojtahedi, S.M.H., Mousavi, S.M., and Makui, A. "Project risk identification and assessment simultaneously using multi-attribute group decision making technique", Safety Science, 48(4), pp. 499-507 (2010).
24
24. Mousavi, S.M., Tavakkoli-Moghaddam, R., Hashemi, H., and Mojtahedi, S.M.H. "A novel approach based on non-parametric resampling with interval analysis for large engineering project risks", Safety Science, 49(10), pp. 1340-1348 (2011).
25
25. Khorasani, G., Mirmohammadi, F., Hassan Motamed, M.F., Tatari, A., Verki, M.R.M., Khorasani, M., and Fazelpour, S. "Application of multi criteria decision making tools in road safety performance indicators and determine appropriate method with average concept", International Journal of Innovative Technology and Exploring Engineering (IJITEE), 3(5) (2013).
26
26. Skorupski, J. "Multi-criteria group decision making under uncertainty with application to air traffic safety", Expert Systems with Applications, 41(16), pp. 7406-7414 (2014).
27
27. Torra, V. and Narukawa, Y. "On hesitant fuzzy sets and decision", in Fuzzy Systems, FUZZ-IEEE 2009, IEEE International Conference on (2009).
28
28. Torra, V. "Hesitant fuzzy sets", International Journal of Intelligent Systems, 25(6), pp. 529-539 (2010).
29
29. Farhadinia, B. "A novel method of ranking hesitant fuzzy values for multiple attribute decision-making problems", International Journal of Intelligent Systems, 28(8), pp. 752-767 (2013).
30
30. Yu, D., Zhang, W., and Xu, Y. "Group decision making under hesitant fuzzy environment with application to personnel evaluation", Knowledge-Based Systems, 52, pp. 1-10 (2013).
31
31. Wang, J.Q., Wang, D.D., Yu Zhang, H., and Chen, X.H. "Multi-criteria outranking approach with hesitant fuzzy sets", OR Spectrum, 36(4), pp. 1001-1019 (2014).
32
32. Zhang, Y., Wang, Y., and Wang, J. "Objective attributes weights determining based on Shannon information entropy in hesitant fuzzy multiple attribute decision making", Mathematical Problems in Engineering, 2014, pp. 30-36 (2014).
33
33. Rodriguez, R.M., Martinez, L., Torra, V., Xu, Z., and Herrera, F. "Hesitant fuzzy sets: state of the art and future directions", International Journal of Intelligent Systems, 29(6), pp. 495-524 (2014).
34
34. Pei, Z. and Yi, L. "A note on operations of hesitant fuzzy sets", International Journal of Computational Intelligence Systems, 8(2), pp. 226-239 (2015).
35
35. Yan, X. "An approach to evaluating the risk of marketing with hesitant fuzzy information", IJACT: International Journal of Advancements in Computing Technology, 4(9), pp. 122-128 (2012).
36
36. Yu, D., Wu, Y., and Zhou, W. "Generalized hesitant fuzzy Bonferroni mean and its application in multicriteria group decision making", Journal of Information and Computational Science, 9(2), pp. 267-274 (2012).
37
37. Xu, Z. and Zhang, X. "Hesitant fuzzy multi-attribute decision making based on TOPSIS with incomplete weight information", Knowledge-Based Systems, 52, pp. 53-64 (2013).
38
38. Liu, H. and Rodriguez, R.M. "A fuzzy envelope for hesitant fuzzy linguistic term set and its application to multicriteria decision making", Information Sciences, 258, pp. 220-238 (2014).
39
39. Liu, D.-N. "Model for evaluating the electrical power system safety with hesitant fuzzy linguistic information", Journal of Intelligent & Fuzzy Systems, 29(2), pp. 725-730 (2015).
40
40. Chen, N., Xu, Z., and Xia, M. "Interval-valued hesitant preference relations and their applications to group decision making", Knowledge-Based Systems, 37, pp. 528-540 (2013).
41
41. Farhadinia, B. "Information measures for hesitant fuzzy sets and interval-valued hesitant fuzzy sets", Information Sciences, 240, pp. 129-144 (2013).
42
42. Li, L.-G. and Peng, D.-H. "Interval-valued hesitant fuzzy Hamacher synergetic weighted aggregation operators and their application to shale gas areas selection", Mathematical Problems in Engineering, 2014, pp. 1-25 (2014).
43
43. Zhang, X. and Xu, Z. "Interval programming method for hesitant fuzzy multi-attribute group decision making with incomplete preference over alternatives", Computers & Industrial Engineering, 75, pp. 217-229 (2014).
44
44. Torra, V. and Narukawa, Y., Modeling Decisions: Aggregation Operators and Information Fusion, Springer (2007).
45
45. Fan, Z.-P., Ma, J., and Zhang, Q. "An approach to multiple attribute decision making based on fuzzy preference information on alternatives", Fuzzy Sets and Systems, 131(1), pp. 101-106 (2002).
46
46. Wang, Y.-M. and Parkan, C. "A general multiple attribute decision-making approach for integrating subjective preferences and objective information", Fuzzy Sets and Systems, 157(10), pp. 1333-1345 (2006).
47
47. Chen, C.-F. and Lee, C.-L. "Determining the attribute weights of professional conference organizer selection: an application of the fuzzy AHP approach", Tourism Economics, 17(5), pp. 1129-1139 (2011).
48
48. Feng, X., Zuo, W., Wang, J., and Feng, L. "TOPSIS method for hesitant fuzzy multiple attribute decision making", Journal of Intelligent and Fuzzy Systems, 26(5), pp. 2263-2269 (2014).
49
49. Atanassov, K.T. "Intuitionistic fuzzy sets", Fuzzy Sets and Systems, 20(1), pp. 87-96 (1986).
50
50. Atanassov, K.T. "More on intuitionistic fuzzy sets", Fuzzy Sets and Systems, 33(1), pp. 37-45 (1989).
51
51. Atanassov, K.T. "Two theorems for intuitionistic fuzzy sets", Fuzzy Sets and Systems, 110(2), pp. 267-269 (2000).
52
52. Xia, M. and Xu, Z. "Hesitant fuzzy information aggregation in decision making", International Journal of Approximate Reasoning, 52(3), pp. 395-407 (2011).
53
53. Liao, H., Xu, Z., and Xia, M. "Multiplicative consistency of hesitant fuzzy preference relation and its application in group decision making", International Journal of Information Technology & Decision Making, 13(1), pp. 47-76 (2014).
54
54. Gitinavard, H., Mousavi, S.M., and Vahdani, B. "Soft computing-based new interval-valued hesitant fuzzy multi-criteria group assessment method with last aggregation to industrial decision problems", Soft Computing, 21(12), pp. 3247-3265 (2017).
55
55. Wei, G., Zhao, X., and Lin, R. "Some hesitant interval-valued fuzzy aggregation operators and their applications to multiple attribute decision making", Knowledge-Based Systems, 46, pp. 43-53 (2013).
56
56. Xu, Z. and Xia, M. "Distance and similarity measures for hesitant fuzzy sets", Information Sciences, 181(11), pp. 2128-2138 (2011).
57
57. Zhu, B., Xu, Z., and Xia, M. "Hesitant fuzzy geometric Bonferroni means", Information Sciences, 205, pp. 72- 85 (2012).
58
58. Zhang, Z., Wang, C., Tian, D., and Li, K. "Induced generalized hesitant fuzzy operators and their application to multiple attribute group decision making", Computers & Industrial Engineering, 67, pp. 116-138 (2014).
59
59. Zhang, N. and Wei, G. "Extension of VIKOR method for decision making problem based on hesitant fuzzy set", Applied Mathematical Modelling, 37(7), pp. 4938-4947 (2013).
60